saved case m2_eyespi_eink1.54 and m2_eyespi_lcd2.8 added

sbc_case_builder.json

@@ -3782,14 +3782,14 @@
             "view": "model",
             "wallthick": "2"
         },
-        "m2_eyespi_shell": {
+        "m2_eyespi_eink1.54": {
             "$fn": "90",
             "access_panel_location": "[0, 17]",
             "access_panel_orientation": "portrait",
             "access_panel_rotation": "0",
             "access_panel_size": "[91, 50]",
             "accessory_highlight": "false",
-            "accessory_name": "m2_eyespi_shell",
+            "accessory_name": "m2_eyespi_eink1.54",
             "adj": "0.01",
             "bend_allowance": "1",
             "bottom_access_panel_enable": "false",
@@ -3985,6 +3985,209 @@
             "view": "model",
             "wallthick": "2"
         },
+        "m2_eyespi_lcd2.8": {
+            "$fn": "90",
+            "access_panel_location": "[0, 17]",
+            "access_panel_orientation": "portrait",
+            "access_panel_rotation": "0",
+            "access_panel_size": "[91, 50]",
+            "accessory_highlight": "false",
+            "accessory_name": "m2_eyespi_lcd2.8",
+            "adj": "0.01",
+            "bend_allowance": "1",
+            "bottom_access_panel_enable": "false",
+            "bottom_clearence": "3.5",
+            "bottom_cover_pattern": "hex_5mm",
+            "bottom_front_left_adjust": "0",
+            "bottom_front_left_enable": "true",
+            "bottom_front_left_support": "none",
+            "bottom_front_right_adjust": "0",
+            "bottom_front_right_enable": "true",
+            "bottom_front_right_support": "none",
+            "bottom_rear_left_adjust": "0",
+            "bottom_rear_left_enable": "true",
+            "bottom_rear_left_support": "none",
+            "bottom_rear_right_adjust": "0",
+            "bottom_rear_right_enable": "true",
+            "bottom_rear_right_support": "none",
+            "bottom_sidewall_support": "true",
+            "bottom_standoff_diameter": "5.75",
+            "bottom_standoff_hole_size": "3.4",
+            "bottom_standoff_insert": "true",
+            "bottom_standoff_insert_dia": "4.2",
+            "bottom_standoff_insert_height": "5.1",
+            "bottom_standoff_pillar": "hex",
+            "bottom_standoff_reverse": "false",
+            "bottom_standoff_size": "custom",
+            "bottom_standoff_support_height": "4",
+            "bottom_standoff_support_size": "10",
+            "bottom_standoff_type": "countersunk",
+            "case_design": "shell",
+            "case_offset_bz": "0",
+            "case_offset_tz": "43",
+            "case_offset_x": "0",
+            "case_offset_y": "10",
+            "cooling": "none",
+            "corner_fillet": "3",
+            "edge_fillet": "0",
+            "ext_bottom_front_left_adjust": "0",
+            "ext_bottom_front_left_enable": "true",
+            "ext_bottom_front_left_support": "front",
+            "ext_bottom_front_right_adjust": "0",
+            "ext_bottom_front_right_enable": "true",
+            "ext_bottom_front_right_support": "front",
+            "ext_bottom_rear_left_adjust": "0",
+            "ext_bottom_rear_left_enable": "true",
+            "ext_bottom_rear_left_support": "rear",
+            "ext_bottom_rear_right_adjust": "0",
+            "ext_bottom_rear_right_enable": "true",
+            "ext_bottom_rear_right_support": "rear",
+            "ext_bottom_sidewall_support": "true",
+            "ext_bottom_standoff_diameter": "5.75",
+            "ext_bottom_standoff_hole_size": "3.4",
+            "ext_bottom_standoff_insert": "false",
+            "ext_bottom_standoff_insert_dia": "4.2",
+            "ext_bottom_standoff_insert_height": "5.1",
+            "ext_bottom_standoff_pillar": "hex",
+            "ext_bottom_standoff_reverse": "false",
+            "ext_bottom_standoff_size": "custom",
+            "ext_bottom_standoff_support_height": "4",
+            "ext_bottom_standoff_support_size": "10",
+            "ext_bottom_standoff_type": "countersunk",
+            "ext_bottom_standoffs": "false",
+            "ext_top_front_left_adjust": "0",
+            "ext_top_front_left_enable": "true",
+            "ext_top_front_left_support": "front",
+            "ext_top_front_right_adjust": "0",
+            "ext_top_front_right_enable": "true",
+            "ext_top_front_right_support": "front",
+            "ext_top_rear_left_adjust": "0",
+            "ext_top_rear_left_enable": "true",
+            "ext_top_rear_left_support": "rear",
+            "ext_top_rear_right_adjust": "0",
+            "ext_top_rear_right_enable": "true",
+            "ext_top_rear_right_support": "rear",
+            "ext_top_sidewall_support": "true",
+            "ext_top_standoff_diameter": "5.75",
+            "ext_top_standoff_hole_size": "2.75",
+            "ext_top_standoff_insert": "false",
+            "ext_top_standoff_insert_dia": "4.2",
+            "ext_top_standoff_insert_height": "5.1",
+            "ext_top_standoff_pillar": "hex",
+            "ext_top_standoff_reverse": "true",
+            "ext_top_standoff_size": "custom",
+            "ext_top_standoff_support_height": "4",
+            "ext_top_standoff_support_size": "10",
+            "ext_top_standoff_type": "blind",
+            "ext_top_standoffs": "false",
+            "fan_size": "0",
+            "flat_blank_section": "false",
+            "floorthick": "1.5",
+            "gap": "2.5",
+            "gpio_opening": "none",
+            "indents": "true",
+            "individual_part": "bottom",
+            "lower_bottom": "0",
+            "material_thickness": "0.5",
+            "move_front": "0",
+            "move_leftside": "0",
+            "move_rear": "0",
+            "move_rightside": "0",
+            "multipcb_bottom_front_left_adjust": "0",
+            "multipcb_bottom_front_left_enable": "true",
+            "multipcb_bottom_front_left_support": "front",
+            "multipcb_bottom_front_right_adjust": "0",
+            "multipcb_bottom_front_right_enable": "true",
+            "multipcb_bottom_front_right_support": "front",
+            "multipcb_bottom_rear_left_adjust": "0",
+            "multipcb_bottom_rear_left_enable": "true",
+            "multipcb_bottom_rear_left_support": "rear",
+            "multipcb_bottom_rear_right_adjust": "0",
+            "multipcb_bottom_rear_right_enable": "true",
+            "multipcb_bottom_rear_right_support": "rear",
+            "multipcb_bottom_sidewall_support": "false",
+            "multipcb_bottom_standoff_diameter": "5.75",
+            "multipcb_bottom_standoff_hole_size": "3.4",
+            "multipcb_bottom_standoff_insert": "false",
+            "multipcb_bottom_standoff_insert_dia": "4.2",
+            "multipcb_bottom_standoff_insert_height": "5.1",
+            "multipcb_bottom_standoff_pillar": "hex",
+            "multipcb_bottom_standoff_reverse": "false",
+            "multipcb_bottom_standoff_size": "m2.5",
+            "multipcb_bottom_standoff_support_height": "4",
+            "multipcb_bottom_standoff_support_size": "7",
+            "multipcb_bottom_standoff_type": "countersunk",
+            "multipcb_bottom_standoffs": "false",
+            "multipcb_top_front_left_adjust": "0",
+            "multipcb_top_front_left_enable": "true",
+            "multipcb_top_front_left_support": "front",
+            "multipcb_top_front_right_adjust": "0",
+            "multipcb_top_front_right_enable": "true",
+            "multipcb_top_front_right_support": "front",
+            "multipcb_top_rear_left_adjust": "0",
+            "multipcb_top_rear_left_enable": "true",
+            "multipcb_top_rear_left_support": "rear",
+            "multipcb_top_rear_right_adjust": "0",
+            "multipcb_top_rear_right_enable": "true",
+            "multipcb_top_rear_right_support": "rear",
+            "multipcb_top_sidewall_support": "false",
+            "multipcb_top_standoff_diameter": "5.75",
+            "multipcb_top_standoff_hole_size": "2.75",
+            "multipcb_top_standoff_insert": "false",
+            "multipcb_top_standoff_insert_dia": "4.2",
+            "multipcb_top_standoff_insert_height": "5.1",
+            "multipcb_top_standoff_pillar": "hex",
+            "multipcb_top_standoff_reverse": "true",
+            "multipcb_top_standoff_size": "m2.5",
+            "multipcb_top_standoff_support_height": "4",
+            "multipcb_top_standoff_support_size": "7",
+            "multipcb_top_standoff_type": "blind",
+            "multipcb_top_standoffs": "false",
+            "pcb_loc_x": "0",
+            "pcb_loc_y": "0",
+            "pcb_loc_z": "0",
+            "raise_top": "0",
+            "rear_io_shield": "false",
+            "sbc_bottom_standoffs": "true",
+            "sbc_highlight": "false",
+            "sbc_information": "false",
+            "sbc_model": "m2",
+            "sbc_off": "false",
+            "sbc_top_standoffs": "true",
+            "sidethick": "2",
+            "standard_motherboard_thickness": "0",
+            "text_color": "Green",
+            "text_font": "Nimbus Mono PS",
+            "tol": "0.25",
+            "top_cover_pattern": "hex_5mm",
+            "top_front_left_adjust": "0",
+            "top_front_left_enable": "true",
+            "top_front_left_support": "left",
+            "top_front_right_adjust": "0",
+            "top_front_right_enable": "true",
+            "top_front_right_support": "right",
+            "top_rear_left_adjust": "0",
+            "top_rear_left_enable": "true",
+            "top_rear_left_support": "left",
+            "top_rear_right_adjust": "0",
+            "top_rear_right_enable": "true",
+            "top_rear_right_support": "none",
+            "top_sidewall_support": "true",
+            "top_standoff_diameter": "5.75",
+            "top_standoff_hole_size": "3.2",
+            "top_standoff_insert": "false",
+            "top_standoff_insert_dia": "4.2",
+            "top_standoff_insert_height": "5.1",
+            "top_standoff_pillar": "hex",
+            "top_standoff_reverse": "true",
+            "top_standoff_size": "m3+",
+            "top_standoff_support_height": "45",
+            "top_standoff_support_size": "10",
+            "top_standoff_type": "recessed",
+            "uart_opening": "open",
+            "view": "model",
+            "wallthick": "2"
+        },
         "h3_shell": {
             "$fn": "90",
             "access_panel_location": "[0, 30]",

sbc_case_builder.scad

@@ -125,7 +125,7 @@ uart_opening = "default"; // [default,none,open,knockout]
 // enable indentations around io openings
 indents = true;
 // case accessory group to load
-accessory_name = "none"; // ["none", "hk_uart", "c4_shell_boombox", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_panel_lcd3.5", "c4_tray_boombox", "c4_round", "c4_hex", "xu4_shifter_shield", "xu4_keyhole", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "hc4_tray_drivebox2.5", "m2_shell", "m2_eyespi_shell", "m1s_shell_nvme", "m1s_shell_ups", "m1s_tray_nvme", "m1_tray_ssd", "m1_fitted_pizzabox2.5", "m1_fitted_pizzabox3.5", "h3_shell", "h3_shell_router", "h3_lowboy", "h3_lowboy_router", "h3_ultimate", "h3_ultimate2", "show2_shell", "rpi5_m2hat", "rock5b", "adapter_mini-stx_m1s", "cs_solarmeter", "n2l_env_sensors", "avr_env_sensors", "adafruit_solar_charger"]
+accessory_name = "none"; // ["none", "hk_uart", "c4_shell_boombox", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_panel_lcd3.5", "c4_tray_boombox", "c4_round", "c4_hex", "xu4_shifter_shield", "xu4_keyhole", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "hc4_tray_drivebox2.5", "m2_shell", "m2_eyespi_eink1.54", "m2_eyespi_lcd2.8", "m1s_shell_nvme", "m1s_shell_ups", "m1s_tray_nvme", "m1_tray_ssd", "m1_fitted_pizzabox2.5", "m1_fitted_pizzabox3.5", "h3_shell", "h3_shell_router", "h3_lowboy", "h3_lowboy_router", "h3_ultimate", "h3_ultimate2", "show2_shell", "rpi5_m2hat", "rock5b", "adapter_mini-stx_m1s", "cs_solarmeter", "n2l_env_sensors", "avr_env_sensors", "adafruit_solar_charger"]
 // sbc information text color
 text_color = "Green"; // [Green, Black, Dimgrey, White, Yellow, Orange, Red, DarkbBlue]
 // sbc information text font

sbc_case_builder_accessories.cfg

@@ -256,7 +256,7 @@ accessory_data = [
      "add2","button",5.5,56,24,"top",[0,0,180],["sbc-case_z",false,false,true],[12,8,1.5],["cutout",[2,2,2,2],2.25],[true,10,2,"default"]],
 
      // Adafruit models available at https://github.com/adafruit/Adafruit_CAD_Parts/tree/main
-     ["m2_eyespi_shell",
+     ["m2_eyespi_eink1.54",
 //     "model","stl_model",109.62,9.8,19.25,"bottom",[0,0,180],["sbc",true,true,true],[0,0,0],[1,"stl/EYESPI-Dual_I2C.stl"],[false,10,2,"default"],
 //     "model","stl_model",50.5,99.75,3,"bottom",[90,0,180],["sbc",false,false,false],[0,0,0],[1,"adafruit/4196 1.54in eink display SSD1681.stl"],[false,10,2,"default"],
      "add2","pcb_holder",56,99.5,49.5,"top",[180,0,180],["case",false,false,false],[47,35,2.5],[2],[false,10,2,"default"],
@@ -271,6 +271,17 @@ accessory_data = [
      "platter","button_assembly",-20,0,0,"top",[0,0,0],["case",false,false,false],[10,0,26.5],["recess"],[false,10,2,"default"]],
 
 
+     ["m2_eyespi_lcd2.8",
+//     "model","stl_model",109.62,9.8,19.25,"bottom",[0,0,180],["sbc",true,true,true],[0,0,0],[1,"stl/EYESPI-Dual_I2C.stl"],[false,10,2,"default"],
+//     "model","stl_model",46,100.75,34,"bottom",[90,90,0],["sbc",false,false,false],[0,0,0],[1,"adafruit/2090 2.8in TFT Cap Touch.stl"],[false,10,2,"default"],
+     "add2","pcb_holder",5,99.5,0,"bottom",[0,0,0],["case",false,false,false],[82,63,2.5],[2],[false,10,2,"default"],
+     "add2","pcb_holder",87,99.5,68.5,"top",[180,0,180],["case",false,false,false],[82,63,2.5],[2],[false,10,2,"default"],
+     "sub","rectangle",19,90.5,12,"top",[0,0,0],["case",false,true,false],[58,5,44],[[1,1,1,1]],[false,10,2,"default"],
+     "add2","button",5.5,56,25.5,"top",[0,0,0],["sbc-case_z",true,true,true],[10,0,44],["recess"],[true,10,2,"default"],
+     "model","button_assembly",5.5,56,25.5,"top",[0,0,0],["sbc-case_z",true,true,true],[10,0,44.5],["recess"],[false,10,2,"default"],
+     "platter","button_assembly",-20,0,0,"top",[0,0,0],["case",false,false,false],[10,0,26.5],["recess"],[false,10,2,"default"]],
+
+
      // Odroid-M1S
      ["m1s_shell_nvme",
      "sub","vent_hex",37,5,-1,"bottom",[0,0,0],["sbc",false,false,false],[11,3,5],[5,1.5,"horizontal",1],[false,10,2,"default"],