fixed indent to adjust correctly based on wallthick, fixed standoff wall support placement,
more customizer integration work, removed case data from sbc_case_builder.cfg, additional cases in json format.
This commit is contained in:
Edward Kisiel
1317
sbc_case_builder.cfg
1317
sbc_case_builder.cfg
File diff suppressed because it is too large
Load Diff
@@ -48,6 +48,398 @@
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
},
|
||||
"c4_stacked": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "none",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "3.5",
|
||||
"case_design": "stacked",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "0",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "none",
|
||||
"fillet": "0",
|
||||
"floorthick": "2",
|
||||
"gap": "1.5",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "false",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "true",
|
||||
"sidethick": "1",
|
||||
"sidewall_support": "false",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
},
|
||||
"c4_panel": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "none",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "0",
|
||||
"case_design": "panel",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "0",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "vent",
|
||||
"fillet": "0",
|
||||
"floorthick": "2",
|
||||
"gap": "1.5",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "true",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "1",
|
||||
"sidewall_support": "false",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
},
|
||||
"c4_tray": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "none",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "3",
|
||||
"case_design": "tray",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "4",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "vent",
|
||||
"fillet": "2",
|
||||
"floorthick": "2",
|
||||
"gap": "1",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "true",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "2",
|
||||
"sidewall_support": "false",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
},
|
||||
"c4_tray_sides": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "none",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "0",
|
||||
"case_design": "tray",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "4",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "sides",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "vent",
|
||||
"fillet": "2",
|
||||
"floorthick": "2",
|
||||
"gap": "1",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "true",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "2",
|
||||
"sidewall_support": "false",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
},
|
||||
"c4_round": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "c4_round",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "0",
|
||||
"case_design": "round",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "0",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "none",
|
||||
"fillet": "0",
|
||||
"floorthick": "2",
|
||||
"gap": "1.5",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "false",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "1",
|
||||
"sidewall_support": "false",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "3"
|
||||
},
|
||||
"c4_hex": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "c4_hex",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "0",
|
||||
"case_design": "hex",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "0",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "none",
|
||||
"fillet": "0",
|
||||
"floorthick": "2",
|
||||
"gap": "1.5",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "false",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "1",
|
||||
"sidewall_support": "false",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "3"
|
||||
},
|
||||
"c4_fitted": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "none",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "3.5",
|
||||
"case_design": "fitted",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "0",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "vent",
|
||||
"fillet": "0",
|
||||
"floorthick": "2",
|
||||
"gap": "1",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "true",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "1",
|
||||
"sidewall_support": "true",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
},
|
||||
"c4_snap": {
|
||||
"$fn": "90",
|
||||
"accessory_name": "none",
|
||||
"adjust": "0.01",
|
||||
"bottom_ext_standoff": "[6.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"bottom_standoff": "[6.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
|
||||
"c_fillet": "3.5",
|
||||
"case_design": "snap",
|
||||
"case_ext_standoffs": "false",
|
||||
"case_ffn": "90",
|
||||
"case_fn": "360",
|
||||
"case_offset_bz": "0",
|
||||
"case_offset_tz": "0",
|
||||
"case_offset_x": "0",
|
||||
"case_offset_y": "0",
|
||||
"case_style": "none",
|
||||
"cooling": "fan",
|
||||
"exhaust_vents": "vent",
|
||||
"fillet": "0",
|
||||
"floorthick": "2",
|
||||
"gap": "1",
|
||||
"gpio_opening": "none",
|
||||
"highlight": "false",
|
||||
"indents": "true",
|
||||
"lip": "5",
|
||||
"lower_bottom": "0",
|
||||
"mode": "none",
|
||||
"move_front": "0",
|
||||
"move_leftside": "0",
|
||||
"move_rear": "0",
|
||||
"move_rightside": "0",
|
||||
"pcb_loc_x": "0",
|
||||
"pcb_loc_y": "0",
|
||||
"pcb_loc_z": "0",
|
||||
"raise_top": "0",
|
||||
"sata_punchout": "false",
|
||||
"sbc_bottom_standoffs": "true",
|
||||
"sbc_model": "c4",
|
||||
"sbc_off": "false",
|
||||
"sbc_top_standoffs": "false",
|
||||
"sidethick": "1",
|
||||
"sidewall_support": "true",
|
||||
"tol": "0.25",
|
||||
"top_ext_standoff": "[6.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"top_standoff": "[6.75, 20, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
|
||||
"view": "model",
|
||||
"vu_rotation": "[15, 0, 0]",
|
||||
"wallthick": "2"
|
||||
}
|
||||
},
|
||||
"fileFormatVersion": "1"
|
||||
|
||||
@@ -33,8 +33,8 @@
|
||||
20220406 Version 1.2.2 added vu7c, vu8m and weatherboard2 models, other additions, fixes and maintenance
|
||||
20220515 Version 1.2.3 added odroid-m1, jetson nano, rockpro64, completed mask(), improved docs
|
||||
changed tray top design
|
||||
2022xxxx Version 2.0.x added round, hexagon, snap and fitted cases, customizer user interface,
|
||||
configuration file changed to json
|
||||
2022xxxx Version 2.0.x added round, hexagon, snap and fitted cases, full customizer user interface,
|
||||
case configuration file changed to json, accessories kept in sbc_case_builder.cfg
|
||||
|
||||
see https://github.com/hominoids/SBC_Case_Builder
|
||||
*/
|
||||
@@ -83,9 +83,9 @@ pcb_loc_z = 0; //[0:.25:50]
|
||||
case_offset_x = 0; //[0:.5:200]
|
||||
// additional y axis case size
|
||||
case_offset_y = 0; //[0:.5:200]
|
||||
// additional z axis case bottom size
|
||||
case_offset_tz = 0; //[0:.5:50]
|
||||
// additional z axis case top size
|
||||
case_offset_tz = 0; //[0:.5:50]
|
||||
// additional z axis case bottom size
|
||||
case_offset_bz = 0; //[0:.5:50]
|
||||
// case wall thickness
|
||||
wallthick = 2; //[1:.5:5]
|
||||
@@ -130,11 +130,10 @@ top_ext_standoff = [6.75,18,2.5,10,4,4,0,1,0,4.5,5.1];
|
||||
bottom_ext_standoff = [6.75,5,3.6,10,4,1,0,0,0,4.5,5.1];
|
||||
|
||||
/* [Case Accessories] */
|
||||
// case accessories to load
|
||||
case_name = "c4_shell"; // [c1+_shell,c1+_shell_boombox,c1+_panel,c1+_panel_boombox,c1+_panel_lcd3.5,c1+_desktop_lcd3.5,c1+_stacked,c1+_tray,c1+_tray_sides,c1+_tray_boombox,c1+_tray_vu5,c1+_tray_vu7,c2_shell,c2_shell_boombox,c2_panel,c2_panel_boombox,c2_panel_lcd3.5,c2_desktop_lcd3.5,c2_deskboom_lcd3.5,c2_stacked,c2_tray,c2_tray_sides,c2_tray_boombox,c2_tray_vu5,c2_tray_vu7,c4_shell,c4_shell_boombox,c4_shell_vu7c,c4_panel,c4_panel_lcd3.5,c4_desktop_lcd3.5,c4_deskboom_lcd3.5,c4_panel_boombox,c4_stacked,c4_tray,c4_tray_sides,c4_tray_boombox,c4_tray_vu5,c4_tray_vu7,xu4_shell,xu4_panel,xu4_stacked,xu4_tray,xu4_tray_sides,xu4_tray_vu5,xu4_tray_vu7,xu4q_shell,xu4q_panel,xu4q_stacked,xu4q_tray,xu4q_tray_sides,xu4q_tray_vu5,xu4q_tray_vu7,n1_shell,n1_panel,n1_stacked,n1_tray,n1_tray_sides,n1_tray_vu5,n1_tray_vu7,n2_panel,n2_tray,n2_tray_sides,n2_tray_vu5,n2_tray_vu7,n2+_panel,n2+_tray,n2+_tray_sides,n2+_tray_vu5,n2+_tray_vu7,n2+_tray_vu7_fan,m1_panel,m1_tray,m1_tray_drive,m1_tray_sides,m1_tray_vu5,m1_tray_vu7,h2_shell,h2_panel,h2_stacked,h2_tray,h2_tray_sides,h2_tray_vu5,h2_tray_vu7,h2_tray_router,h2_router_station,h2_lowboy,h2_lowboy_router,h2_shell_router,h2_shell_router-ssd,hc4_shell,hc4_panel,hc4_stacked,hc4_tray,hc4_tray_sides,hc4_tray_vu5,hc4_tray_vu7,hc4_tray_drivebox2.5,hc4_shell_drivebox2.5,hc4_shell_drivebox2.5v,hc4_shell_drivebox3.5,jetsonnano_shell,jetsonnano_panel,jetsonnano_stacked,jetsonnano_tray,jetsonnano_tray_sides,rockpro64_shell,rockpro64_panel,rockpro64_stacked,rockpro64_tray,rockpro64_tray_sides,show2_shell,rpi3b+_shell,rpi3b+_panel,rpi3b+_stacked,rpi3b+_tray,test]
|
||||
// case accessory group to load
|
||||
accessory_name = "none"; // [none,c1+_shell_boombox,c1+_panel_boombox,c1+_panel_lcd3.5,c1+_desktop_lcd3.5,c1+_tray_boombox,c1+_tray_vu5,c1+_tray_vu7,c2_shell,c2_shell_boombox,c2_panel,c2_panel_boombox,c2_panel_lcd3.5,c2_desktop_lcd3.5,c2_deskboom_lcd3.5,c2_stacked,c2_tray,c2_tray_sides,c2_tray_boombox,c2_tray_vu5,c2_tray_vu7,c4_shell,c4_shell_boombox,c4_shell_vu7c,c4_panel,c4_panel_lcd3.5,c4_desktop_lcd3.5,c4_deskboom_lcd3.5,c4_panel_boombox,c4_stacked,c4_tray,c4_tray_sides,c4_tray_boombox,c4_tray_vu5,c4_tray_vu7,c4_round,c4_hex,xu4_tray_vu5,xu4_tray_vu7,xu4q_tray_vu5,xu4q_tray_vu7,n1_tray_vu5,n1_tray_vu7,n2_tray_vu5,n2_tray_vu7,n2+_tray_vu5,n2+_tray_vu7,n2+_tray_vu7_fan,m1_panel,m1_tray,m1_tray_drive,m1_tray_sides,m1_tray_vu5,m1_tray_vu7,h2_shell,h2_panel,h2_stacked,h2_tray,h2_tray_sides,h2_tray_vu5,h2_tray_vu7,h2_tray_router,h2_router_station,h2_lowboy,h2_lowboy_router,h2_shell_router,h2_shell_router-ssd,hc4_shell,hc4_panel,hc4_stacked,hc4_tray,hc4_tray_sides,hc4_tray_vu5,hc4_tray_vu7,hc4_tray_drivebox2.5,hc4_shell_drivebox2.5,hc4_shell_drivebox2.5v,hc4_shell_drivebox3.5,jetsonnano_shell,jetsonnano_panel,jetsonnano_stacked,jetsonnano_tray,jetsonnano_tray_sides,rockpro64_shell,rockpro64_panel,rockpro64_stacked,rockpro64_tray,rockpro64_tray_sides,show2_shell,test]
|
||||
|
||||
|
||||
c = search([case_name],case_data);
|
||||
a = search([accessory_name],accessory_data);
|
||||
s = search([sbc_model],sbc_data);
|
||||
|
||||
pcb_width = sbc_data[s[0]][1];
|
||||
@@ -143,8 +142,8 @@ pcb_z = sbc_data[s[0]][3];
|
||||
pcb_tmaxz = sbc_data[s[0]][5];
|
||||
pcb_bmaxz = sbc_data[s[0]][6];
|
||||
|
||||
width = pcb_width+(2*(wallthick+gap))+case_offset_x;
|
||||
depth = pcb_depth+(2*(wallthick+gap))+case_offset_y;
|
||||
width = pcb_width+2*(wallthick+gap)+case_offset_x;
|
||||
depth = pcb_depth+2*(wallthick+gap)+case_offset_y;
|
||||
top_height = pcb_tmaxz+floorthick+case_offset_tz;
|
||||
bottom_height = pcb_bmaxz+floorthick+case_offset_bz;
|
||||
case_z = bottom_height+top_height;
|
||||
@@ -205,21 +204,22 @@ if (view == "platter") {
|
||||
translate([0,(2*depth)+20,case_z]) rotate([180,0,0]) case_top(case_design);
|
||||
}
|
||||
// platter accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "platter" && type != "button_top") {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
@@ -230,6 +230,7 @@ if (view == "platter") {
|
||||
translate([loc_x-20,loc_y-20,loc_z]) rotate([0,0,0]) button_clip(data_3);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// model view
|
||||
@@ -240,7 +241,7 @@ if (view == "model") {
|
||||
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
}
|
||||
if(sbc_off == false) {
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_standoff[1]]) sbc(sbc_model);
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z]) sbc(sbc_model);
|
||||
}
|
||||
if(raise_top >= 0) {
|
||||
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
||||
@@ -251,7 +252,7 @@ if (view == "model") {
|
||||
color("grey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
}
|
||||
if(sbc_off == false) {
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_standoff[1]]) sbc(sbc_model);
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z]) sbc(sbc_model);
|
||||
}
|
||||
if(raise_top >= 0) {
|
||||
color("grey",1) translate([0,0,raise_top])case_top(case_design);
|
||||
@@ -274,7 +275,7 @@ if (view == "model") {
|
||||
color("grey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
}
|
||||
if(sbc_off == false) {
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_standoff[1]]) sbc(sbc_model);
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z]) sbc(sbc_model);
|
||||
}
|
||||
if(raise_top >= 0) {
|
||||
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
||||
@@ -337,10 +338,10 @@ if (view == "model") {
|
||||
}
|
||||
if(case_design == "round" || case_design == "hex") {
|
||||
if(lower_bottom >= 0) {
|
||||
color("grey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
}
|
||||
if(sbc_off == false) {
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_standoff[1]]) sbc(sbc_model);
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z]) sbc(sbc_model);
|
||||
}
|
||||
if(raise_top >= 0) {
|
||||
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
||||
@@ -348,31 +349,33 @@ if (view == "model") {
|
||||
}
|
||||
if(case_design == "snap" || case_design == "fitted") {
|
||||
if(lower_bottom >= 0) {
|
||||
color("grey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
||||
}
|
||||
if(sbc_off == false) {
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_standoff[1]]) sbc(sbc_model);
|
||||
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z]) sbc(sbc_model);
|
||||
}
|
||||
if(raise_top >= 0) {
|
||||
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
||||
}
|
||||
}
|
||||
// model accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
echo(accessory_name,accessory_data[a[0]]);
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "model" && face == "top" && raise_top > -1) {
|
||||
add(type,loc_x,loc_y,loc_z+raise_top,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
@@ -383,15 +386,14 @@ if (view == "model") {
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if(case_design == "tray") {
|
||||
}
|
||||
if(case_design == "tray") {
|
||||
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
||||
}
|
||||
else {
|
||||
}
|
||||
else {
|
||||
echo(width=width,depth=depth,top=top_height,bottom=bottom_height);
|
||||
}
|
||||
}
|
||||
//}
|
||||
|
||||
// debug
|
||||
if (view == "debug") {
|
||||
@@ -498,7 +500,6 @@ module case_bottom(case_design) {
|
||||
cube([width,wallthick,top_height-floorthick]);
|
||||
|
||||
}
|
||||
|
||||
if(case_design == "round") {
|
||||
difference() {
|
||||
translate([pcb_width/2,pcb_depth/2,bottom_height/2]) rotate([0,0,30])
|
||||
@@ -598,27 +599,29 @@ module case_bottom(case_design) {
|
||||
}
|
||||
}
|
||||
// additive accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "add1" && face == "bottom") {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
// side attachment holes
|
||||
if(case_design == "tray") {
|
||||
// right side bottom attachment holes
|
||||
@@ -708,25 +711,40 @@ module case_bottom(case_design) {
|
||||
pcb_hole_size = sbc_data[s[0]][i+2];
|
||||
if(sbc_model == "h2" && mode == "net_card" && (i == 7 || i ==13)) {
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0) {
|
||||
bottom_standoff = [case_data[c[0]][27][0], // diameter
|
||||
netcard_standoff = [bottom_standoff[0], // diameter
|
||||
bottom_height-pcb_z-4, // height bottom_height-pcb_z
|
||||
case_data[c[0]][27][2], // holesize
|
||||
case_data[c[0]][27][3], // supportsize
|
||||
case_data[c[0]][27][4], // supportheight
|
||||
case_data[c[0]][27][5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
case_data[c[0]][27][6], // standoff style 0=hex, 1=cylinder
|
||||
case_data[c[0]][27][7], // enable reverse standoff
|
||||
case_data[c[0]][27][8], // enable insert at top of standoff
|
||||
case_data[c[0]][27][9], // insert hole dia. mm
|
||||
case_data[c[0]][27][10]]; // insert depth mm
|
||||
|
||||
translate([pcb_hole_x,pcb_hole_y,0]) standoff(bottom_standoff);
|
||||
bottom_standoff[2], // holesize
|
||||
bottom_standoff[3], // supportsize
|
||||
bottom_standoff[4], // supportheight
|
||||
bottom_standoff[5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
bottom_standoff[6], // standoff style 0=hex, 1=cylinder
|
||||
bottom_standoff[7], // enable reverse standoff
|
||||
bottom_standoff[8], // enable insert at top of standoff
|
||||
bottom_standoff[9], // insert hole dia. mm
|
||||
bottom_standoff[10]]; // insert depth mm
|
||||
translate([pcb_hole_x,pcb_hole_y,0]) standoff(netcard_standoff);
|
||||
}
|
||||
}
|
||||
else {
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0) {
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0 && case_design != "shell") {
|
||||
translate([pcb_hole_x,pcb_hole_y,0]) standoff(bottom_standoff);
|
||||
}
|
||||
else {
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0) {
|
||||
shell_standoff = [bottom_standoff[0], // diameter
|
||||
bottom_height-pcb_z, // height bottom_height-pcb_z
|
||||
bottom_standoff[2], // holesize
|
||||
bottom_standoff[3], // supportsize
|
||||
bottom_standoff[4], // supportheight
|
||||
bottom_standoff[5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
bottom_standoff[6], // standoff style 0=hex, 1=cylinder
|
||||
bottom_standoff[7], // enable reverse standoff
|
||||
bottom_standoff[8], // enable insert at top of standoff
|
||||
bottom_standoff[9], // insert hole dia. mm
|
||||
bottom_standoff[10]]; // insert depth mm
|
||||
translate([pcb_hole_x,pcb_hole_y,0]) standoff(shell_standoff);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -775,19 +793,19 @@ module case_bottom(case_design) {
|
||||
pcb_hole_size = sbc_data[s[0]][i+2];
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0 && i == 7 || i == 10) {
|
||||
if(sbc_model == "h2" && mode == "net_card" && i == 7) {
|
||||
bottom_standoff = [case_data[c[0]][27][0], // diameter
|
||||
netcard_standoff = [bottom_standoff[0], // diameter
|
||||
bottom_height-pcb_z-4, // height bottom_height-pcb_z
|
||||
case_data[c[0]][27][2], // holesize
|
||||
case_data[c[0]][27][3], // supportsize
|
||||
case_data[c[0]][27][4], // supportheight
|
||||
case_data[c[0]][27][5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
case_data[c[0]][27][6], // standoff style 0=hex, 1=cylinder
|
||||
case_data[c[0]][27][7], // enable reverse standoff
|
||||
case_data[c[0]][27][8], // enable insert at top of standoff
|
||||
case_data[c[0]][27][9], // insert hole dia. mm
|
||||
case_data[c[0]][27][10]]; // insert depth mm
|
||||
translate([pcb_hole_x-(bottom_standoff[0]/2)-2.6+adjust, pcb_hole_y-gap,0])
|
||||
cube([gap+1.6,2,bottom_standoff[1]]);
|
||||
bottom_standoff[2], // holesize
|
||||
bottom_standoff[3], // supportsize
|
||||
bottom_standoff[4], // supportheight
|
||||
bottom_standoff[5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
bottom_standoff[6], // standoff style 0=hex, 1=cylinder
|
||||
bottom_standoff[7], // enable reverse standoff
|
||||
bottom_standoff[8], // enable insert at top of standoff
|
||||
bottom_standoff[9], // insert hole dia. mm
|
||||
bottom_standoff[10]]; // insert depth mm
|
||||
translate([pcb_hole_x-(netcard_standoff[0]/2)-2.6+adjust, pcb_hole_y-gap,0])
|
||||
cube([gap+1.6,2,netcard_standoff[1]]);
|
||||
}
|
||||
else {
|
||||
translate([pcb_hole_x-(bottom_standoff[0]/2)-2.6+adjust, pcb_hole_y-gap,0])
|
||||
@@ -796,19 +814,19 @@ module case_bottom(case_design) {
|
||||
}
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0 && i == 13 || i == 16) {
|
||||
if(sbc_model == "h2" && mode == "net_card" && i == 13) {
|
||||
bottom_standoff = [case_data[c[0]][27][0], // diameter
|
||||
netcard_standoff = [bottom_standoff[0], // diameter
|
||||
bottom_height-pcb_z-4, // height bottom_height-pcb_z
|
||||
case_data[c[0]][27][2], // holesize
|
||||
case_data[c[0]][27][3], // supportsize
|
||||
case_data[c[0]][27][4], // supportheight
|
||||
case_data[c[0]][27][5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
case_data[c[0]][27][6], // standoff style 0=hex, 1=cylinder
|
||||
case_data[c[0]][27][7], // enable reverse standoff
|
||||
case_data[c[0]][27][8], // enable insert at top of standoff
|
||||
case_data[c[0]][27][9], // insert hole dia. mm
|
||||
case_data[c[0]][27][10]]; // insert depth mm
|
||||
translate([pcb_hole_x+(bottom_standoff[0]/2)-.5+adjust, pcb_hole_y-gap,0])
|
||||
cube([gap+1.5,2,bottom_standoff[1]]);
|
||||
bottom_standoff[2], // holesize
|
||||
bottom_standoff[3], // supportsize
|
||||
bottom_standoff[4], // supportheight
|
||||
bottom_standoff[5], // 1=countersink, 2=recessed hole, 3=nut holder, 4=blind
|
||||
bottom_standoff[6], // standoff style 0=hex, 1=cylinder
|
||||
bottom_standoff[7], // enable reverse standoff
|
||||
bottom_standoff[8], // enable insert at top of standoff
|
||||
bottom_standoff[9], // insert hole dia. mm
|
||||
bottom_standoff[10]]; // insert depth mm
|
||||
translate([pcb_hole_x+(netcard_standoff[0]/2)-.5+adjust, pcb_hole_y-gap,0])
|
||||
cube([gap+1.5,2,netcard_standoff[1]]);
|
||||
}
|
||||
else {
|
||||
translate([pcb_hole_x+(bottom_standoff[0]/2)-.5+adjust, pcb_hole_y-gap,0])
|
||||
@@ -845,21 +863,22 @@ module case_bottom(case_design) {
|
||||
|
||||
}
|
||||
// subtractive accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
if ((class == "sub" && face == "bottom") || class == "suball") {
|
||||
if(highlight == false) {
|
||||
sub(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
@@ -903,7 +922,6 @@ module case_bottom(case_design) {
|
||||
}
|
||||
if ((class == "add1" || class == "add2") && face == "bottom" && type == "button") {
|
||||
if(data_3 == "recess") {
|
||||
// sub("round",loc_x,loc_y,loc_z-1,face,rotation,size_x,size_y,5,data_1,data_2,data_3,0);
|
||||
#translate([loc_x,loc_y,loc_z]) sphere(d=size_x);
|
||||
}
|
||||
if(data_3 == "cutout") {
|
||||
@@ -911,7 +929,7 @@ module case_bottom(case_design) {
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
// sbc openings
|
||||
open_io();
|
||||
// clean fillets
|
||||
@@ -923,26 +941,28 @@ module case_bottom(case_design) {
|
||||
}
|
||||
}
|
||||
// additive accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "add2" && face == "bottom") {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -1025,7 +1045,7 @@ module case_top(case_design) {
|
||||
cylinder(d=3, h=10+sidethick+(2*adjust));
|
||||
}
|
||||
// left side bottom attachment holes
|
||||
translate([-2*wallthick-gap-2*adjust,wallthick+gap+10,
|
||||
translate([-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+10,
|
||||
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
||||
cylinder(d=3, h=10+sidethick+(2*adjust));
|
||||
if(depth >= 75) {
|
||||
@@ -1074,7 +1094,7 @@ module case_top(case_design) {
|
||||
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
||||
}
|
||||
translate([width-8.5+adjust,(depth/2)-32,bottom_height])
|
||||
cube([wallthick-.5,depth-3-2*(floorthick+gap),case_z-gap]);
|
||||
cube([wallthick-.5,depth-3-2*(floorthick+gap),top_height-floorthick-gap]);
|
||||
}
|
||||
if(case_design == "snap") {
|
||||
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z+floorthick])
|
||||
@@ -1122,27 +1142,29 @@ module case_top(case_design) {
|
||||
bottom=[0,0,0,0], $fn=90);
|
||||
}
|
||||
}
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "add1" && face == "top") {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
// pcb standoff holes
|
||||
if(top_standoff[5] != 4 && sbc_top_standoffs == true) {
|
||||
for (i=[7:3:16]) {
|
||||
@@ -1216,8 +1238,8 @@ module case_top(case_design) {
|
||||
if(pcb_width/pcb_depth >= 1.4) {
|
||||
translate([0,pcb_depth,0]) rotate([180,0,0]) {
|
||||
for (i=[7:3:16]) {
|
||||
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
||||
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
||||
pcb_hole_x = sbc_data[s[0]][i]-pcb_loc_x;
|
||||
pcb_hole_y = sbc_data[s[0]][i+1]-pcb_loc_y;
|
||||
pcb_hole_size = sbc_data[s[0]][i+2];
|
||||
if (pcb_hole_x!=0 && pcb_hole_y!=0 && i == 7 || i == 13) {
|
||||
translate([pcb_hole_x-1, pcb_hole_y-(top_standoff[0]/2)-(gap-adjust)-1.4,
|
||||
@@ -1272,21 +1294,23 @@ module case_top(case_design) {
|
||||
}
|
||||
}
|
||||
// subtractive accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if ((class == "sub" && face == "top") || class == "suball") {
|
||||
if(highlight == false) {
|
||||
sub(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
@@ -1325,6 +1349,7 @@ module case_top(case_design) {
|
||||
sub("slot",loc_x+37.5,loc_y-4.75,loc_z,face,[0,0,0],6,14,80,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
// sbc openings
|
||||
open_io();
|
||||
// clean fillets
|
||||
@@ -1338,26 +1363,28 @@ module case_top(case_design) {
|
||||
}
|
||||
}
|
||||
// additive accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "add2" && face == "top") {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// case side
|
||||
@@ -1530,42 +1557,46 @@ module case_side(case_design,case_style,side) {
|
||||
vu_holder(case_style,side,vesa,cheight);
|
||||
}
|
||||
// additive accessories
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "add1" && face == side) {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
}
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if ((class == "sub" && face == side) || class == "suball") {
|
||||
if(highlight == false) {
|
||||
sub(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
@@ -1618,7 +1649,6 @@ module case_side(case_design,case_style,side) {
|
||||
}
|
||||
if ((class == "add1" || class == "add2") && face == "bottom" && type == "button") {
|
||||
if(data_3 == "recess") {
|
||||
// sub("round",loc_x,loc_y,loc_z-1,face,rotation,size_x,size_y,5,data_1,data_2,data_3,0);
|
||||
#translate([loc_x,loc_y,loc_z]) sphere(d=size_x);
|
||||
}
|
||||
if(data_3 == "cutout") {
|
||||
@@ -1626,29 +1656,32 @@ module case_side(case_design,case_style,side) {
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
// sbc openings
|
||||
open_io();
|
||||
}
|
||||
for (i=[30:14:len(case_data[c[0]])-1]) {
|
||||
class = case_data[c[0]][i];
|
||||
type = case_data[c[0]][i+1];
|
||||
loc_x = case_data[c[0]][i+2];
|
||||
loc_y = case_data[c[0]][i+3];
|
||||
loc_z = case_data[c[0]][i+4];
|
||||
face = case_data[c[0]][i+5];
|
||||
rotation = case_data[c[0]][i+6];
|
||||
size_x = case_data[c[0]][i+7];
|
||||
size_y = case_data[c[0]][i+8];
|
||||
size_z = case_data[c[0]][i+9];
|
||||
data_1 = case_data[c[0]][i+10];
|
||||
data_2 = case_data[c[0]][i+11];
|
||||
data_3 = case_data[c[0]][i+12];
|
||||
data_4 = case_data[c[0]][i+13];
|
||||
if(accessory_name != "none") {
|
||||
for (i=[1:14:len(accessory_data[a[0]])-1]) {
|
||||
class = accessory_data[a[0]][i];
|
||||
type = accessory_data[a[0]][i+1];
|
||||
loc_x = accessory_data[a[0]][i+2];
|
||||
loc_y = accessory_data[a[0]][i+3];
|
||||
loc_z = accessory_data[a[0]][i+4];
|
||||
face = accessory_data[a[0]][i+5];
|
||||
rotation = accessory_data[a[0]][i+6];
|
||||
size_x = accessory_data[a[0]][i+7];
|
||||
size_y = accessory_data[a[0]][i+8];
|
||||
size_z = accessory_data[a[0]][i+9];
|
||||
data_1 = accessory_data[a[0]][i+10];
|
||||
data_2 = accessory_data[a[0]][i+11];
|
||||
data_3 = accessory_data[a[0]][i+12];
|
||||
data_4 = accessory_data[a[0]][i+13];
|
||||
|
||||
if (class == "add2" && face == side) {
|
||||
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// sbc openings
|
||||
@@ -1667,18 +1700,18 @@ module open_io() {
|
||||
// indents
|
||||
if(indents == true) {
|
||||
if(type == "micro") {
|
||||
translate([loc_x-.6,loc_y-gap,bottom_height+pcb_loc_z+1.9]) rotate([90,0,0]) slot(6,8,2.1);
|
||||
translate([loc_x-.6,loc_y-gap-wallthick/2+1,bottom_height+pcb_loc_z+1.9]) rotate([90,0,0]) slot(6,8,wallthick);
|
||||
}
|
||||
if(type == "hdmi_a" && side == "top") {
|
||||
translate([loc_x+2.375,loc_y-gap,bottom_height+pcb_loc_z+3.75]) rotate([90,0,0]) slot(12,10,2.1);
|
||||
translate([loc_x+2.375,loc_y-gap-wallthick/2+1,bottom_height+pcb_loc_z+3.75]) rotate([90,0,0]) slot(12,10,wallthick);
|
||||
}
|
||||
if(type == "pwr5.5_7.5x11.5") {
|
||||
translate([loc_x+3.5,loc_y-gap,bottom_height+pcb_loc_z+6.25])
|
||||
rotate([90,0,0]) cylinder(d=10, h=sidethick+(2*adjust));
|
||||
translate([loc_x+3.5,loc_y-gap-wallthick/2+1,bottom_height+pcb_loc_z+6.25])
|
||||
rotate([90,0,0]) cylinder(d=10, h=wallthick+(2*adjust));
|
||||
}
|
||||
if(type == "pwr2.5_5x7.5") {
|
||||
translate([loc_x+2.75,loc_y-gap-1,bottom_height+pcb_loc_z+2.1])
|
||||
rotate([90,0,0]) cylinder(d=6, h=sidethick+(2*adjust));
|
||||
translate([loc_x+2.75,loc_y-gap-wallthick/2+1,bottom_height+pcb_loc_z+2.1])
|
||||
rotate([90,0,0]) cylinder(d=6, h=wallthick+(2*adjust));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
Reference in New Issue
Block a user