added io masks, updated sbc_models, rockpro64 and jetsonnano cases, other cleanup
This commit is contained in:
Edward Kisiel
@@ -1,6 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
SBC Library Copyright 2016,2017,2018,2019,2020 Edward A. Kisiel
|
SBC Library Copyright 2016,2017,2018,2019,2020,2021,2022 Edward A. Kisiel hominoid@cablemi.com
|
||||||
hominoid @ www.forum.odroid.com
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
This program is free software: you can redistribute it and/or modify
|
||||||
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
||||||
@@ -50,6 +49,37 @@
|
|||||||
20220413 Version 1.0.6 adjusted slide_4x9, adjust m.2_header, rj45-usb2_double, rj45-usb3_double, out-in-spdif,
|
20220413 Version 1.0.6 adjusted slide_4x9, adjust m.2_header, rj45-usb2_double, rj45-usb3_double, out-in-spdif,
|
||||||
momentary_6x6x4, fixed color for usb2 micro otg, adjust all header heights,
|
momentary_6x6x4, fixed color for usb2 micro otg, adjust all header heights,
|
||||||
added mipi_csi, mipi_dsi, m.2_stud
|
added mipi_csi, mipi_dsi, m.2_stud
|
||||||
|
|
||||||
|
see https://github.com/hominoids/SBC_Case_Builder
|
||||||
|
|
||||||
|
place(x,y,size_x,size_y,rotation,side,type,pcbsize_z)
|
||||||
|
pcb_add(size_x,size_y,loc_x,loc_y,rotation,side,type,pcbsize_z,data_1,data_2) - "square","round"
|
||||||
|
pcb_sub(size_x,size_y,loc_x,loc_y,rotation,side,type,pcbsize_z,data_1,data_2) - "square","round","art"
|
||||||
|
pcb_art(scale_d1,type,dxf_file) - "dxf"
|
||||||
|
pcb(size, radius)
|
||||||
|
memory(x,y,rotation,side,type,pcbsize_z) - "emmc","emmc_plug","sodimm_5.2","sodimm_9.2"
|
||||||
|
switch(x,y,rotation,side,type,pcbsize_z) - "slide_4x9"
|
||||||
|
button(x,y,rotation,side,type,pcbsize_z) - "momentary_6x6x9","momentary_6x6x4","momentary_6x6x4_90","momentary_4x2x1"
|
||||||
|
plug(x,y,rotation,side,type,pcbsize_z) - "pwr2.5_5x7.5","pwr5.5_7.5x11.5","pwr5.5_10x10","rtc_micro","audio_micro","uart_micro","molex_4x1","small_encl_satapwr"
|
||||||
|
usb2(x,y,rotation,side,type,pcbsize_z) - "single_vert_a","double_stacked_a","micro"
|
||||||
|
usb3(x,y,rotation,side,type,pcbsize_z) - "double_stacked_a"
|
||||||
|
network(x,y,rotation,side,type,pcbsize_z) - "rj45_single"
|
||||||
|
video(x,y,rotation,side,type,pcbsize_z - "hdmi_a","dp-hdmi_a","mipi_csi","mipi_dsi"
|
||||||
|
fan(x,y,rotation,side,type,pcbsize_z) - "micro","encl_pmw","encl_pmw_h"
|
||||||
|
gpio(x,y,rotation,side,type,pcbsize_z) - "encl_header_30","encl_header_12","header_40","header_20"
|
||||||
|
ic(x,y,rotation,side,type,pcbsize_z) - "ic_2.8x2.8","ic_3x3","ic_3.7x3.7","ic_4x4","ic_4.7x4.7","ic_5x5","ic_5.75x5.75","ic_6x6","ic_6.4x6.4",ic_6.75x6.75",
|
||||||
|
"ic_7x7","ic_4.3x5.1","ic_5.4x5.3","ic_6.7x8.4","ic_9x9","ic_11x8","ic_13x8","ic_13x9","ic_16x10"
|
||||||
|
audio(x,y,rotation,side,type,pcbsize_z) - "out-in-spdif","jack_3.5"
|
||||||
|
storage(x,y,rotation,side,type,pcbsize_z) - "sdcard","sdcard_i","sata_header","sata_power_vrec","sata_encl_power","sata_encl_header","m.2_header","m.2_stud"
|
||||||
|
combo(x,y,rotation,side,type,pcbsize_z) - "rj45-usb2_double","rj45-usb3_double"
|
||||||
|
jumper(x,y,rotation,side,type,pcbsize_z) - "header_2x1","header_3x2","header_5x1","header_6x1","header_7x1"
|
||||||
|
misc(x,y,rotation,side,type,pcbsize_z) - "ir_1","led_3x1.5","lcd_2.2","bat_hold_1"
|
||||||
|
heatsink(x,y,rotation,side,type,pcbsize_z,soc1size_z) - "hc4_oem","c4_oem","c2_oem","c1+_oem","xu4_oem","n1_oem","xu4q_oem","n2_oem","n2+_oem","m1_oem","h2_oem"
|
||||||
|
pcie(x,y,rotation,side,type,pcbsize_z) - "x4"
|
||||||
|
jst_ph(x,y,rotation,side,type,pcbsize_z) - type is #pins
|
||||||
|
cm_holder(x,y,rotation,side,type,pcbsize_z) - jetsonnano
|
||||||
|
cm(x,y,rotation,side,type,pcbsize_z) - jetsonnano
|
||||||
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
module place(x,y,size_x,size_y,rotation,side,type,pcbsize_z) {
|
module place(x,y,size_x,size_y,rotation,side,type,pcbsize_z) {
|
||||||
@@ -220,12 +250,12 @@ module memory(x,y,rotation,side,type,pcbsize_z) {
|
|||||||
module switch(x,y,rotation,side,type,pcbsize_z) {
|
module switch(x,y,rotation,side,type,pcbsize_z) {
|
||||||
// boot selector switch
|
// boot selector switch
|
||||||
if(type=="slide_4x9") {
|
if(type=="slide_4x9") {
|
||||||
size_x = 3.75;
|
size_x = 9;
|
||||||
size_y = 9.1;
|
size_y = 3.75;
|
||||||
place(x,y,size_x,size_y,rotation,side,type,pcbsize_z)
|
place(x,y,size_x,size_y,rotation,side,type,pcbsize_z)
|
||||||
union() {
|
union() {
|
||||||
color("silver") translate([0,0,.5]) cube([size_x, size_y, 3.5]);
|
color("silver") translate([0,0,.5]) cube([size_x, size_y, 3.5]);
|
||||||
color("white") translate([3.75,4.5,1.75]) cube([3, 2, 1.5]);
|
color("white") translate([3.75,-1.99,1.75]) cube([3, 2, 1.5]);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@@ -1489,19 +1519,19 @@ module heatsink(x,y,rotation,side,type,pcbsize_z,soc1size_z) {
|
|||||||
if(type=="n2_oem") {
|
if(type=="n2_oem") {
|
||||||
size_x = 90;
|
size_x = 90;
|
||||||
size_y = 90;
|
size_y = 90;
|
||||||
place(x,y,size_x,size_y,rotation,side,type,(pcbsize_z-pcbsize_z-3))
|
place(x,y,size_x,size_y,rotation,side,type,-3)
|
||||||
color("gray") import("Odroid-N2_Heatsink.stl", convexity=3);
|
color("gray") import("Odroid-N2_Heatsink.stl", convexity=3);
|
||||||
}
|
}
|
||||||
if(type=="n2+_oem") {
|
if(type=="n2+_oem") {
|
||||||
size_x = 90;
|
size_x = 90;
|
||||||
size_y = 90;
|
size_y = 90;
|
||||||
place(x,y,size_x,size_y,rotation,side,type,(pcbsize_z-pcbsize_z-3))
|
place(x,y,size_x,size_y,rotation,side,type,-3)
|
||||||
color("gray") import("Odroid-N2+_Heatsink.stl", convexity=3);
|
color("gray") import("Odroid-N2+_Heatsink.stl", convexity=3);
|
||||||
}
|
}
|
||||||
if(type=="m1_oem") {
|
if(type=="m1_oem") {
|
||||||
size_x = 90;
|
size_x = 90;
|
||||||
size_y = 122;
|
size_y = 122;
|
||||||
place(x,y,size_x,size_y,rotation,side,type,(pcbsize_z-pcbsize_z-3))
|
place(x,y,size_x,size_y,rotation,side,type,-3)
|
||||||
color("gray") translate([-.5,0,3]) rotate([0,0,0]) import("Odroid-M1_Heatsink.stl", convexity=3);
|
color("gray") translate([-.5,0,3]) rotate([0,0,0]) import("Odroid-M1_Heatsink.stl", convexity=3);
|
||||||
}
|
}
|
||||||
if(type=="h2_oem") {
|
if(type=="h2_oem") {
|
||||||
|
|||||||
@@ -1,6 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
SBC Data Library Copyright 2018,2019,2020 Edward A. Kisiel
|
SBC Data Library Copyright 2018,2019,2020,2021,2022 Edward A. Kisiel hominoid@cablemi.com
|
||||||
hominoid @ www.forum.odroid.com
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
This program is free software: you can redistribute it and/or modify
|
||||||
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
||||||
@@ -30,6 +29,8 @@
|
|||||||
raised C4 hdmi, updated Odroid-XU4Q, add type sdcard_i, adjusted C2 usb
|
raised C4 hdmi, updated Odroid-XU4Q, add type sdcard_i, adjusted C2 usb
|
||||||
20220413 Version 1.06 Added Odroid-M1 as m1, adjustments h2, c4 gpio
|
20220413 Version 1.06 Added Odroid-M1 as m1, adjustments h2, c4 gpio
|
||||||
|
|
||||||
|
see https://github.com/hominoids/SBC_Case_Builder
|
||||||
|
|
||||||
Instructions: All measurements from lower left corner of PCB to lower left
|
Instructions: All measurements from lower left corner of PCB to lower left
|
||||||
corner of component or opening, holes measured to center. All measurements in mm.
|
corner of component or opening, holes measured to center. All measurements in mm.
|
||||||
PCB orientation is long side of board along the x axis.
|
PCB orientation is long side of board along the x axis.
|
||||||
@@ -50,31 +51,32 @@
|
|||||||
component_x, component_y, component_rotation, "component_side", "component_class","component_type"
|
component_x, component_y, component_rotation, "component_side", "component_class","component_type"
|
||||||
|
|
||||||
component classes and types:
|
component classes and types:
|
||||||
memory - emmc, emmc_plug, sodimm_5.2, sodimm_9.2
|
memory - "emmc","emmc_plug","sodimm_5.2","sodimm_9.2"
|
||||||
switch - slide_4x9
|
switch - slide_4x9
|
||||||
button - momentary_6x6x9, momentary_6x6x4, momentary_6x6x4_90
|
button - "momentary_6x6x9","momentary_6x6x4","momentary_6x6x4_90","momentary_4x2x1"
|
||||||
plug - pwr5.5_7.5x11.5, pwr2.5_5x7.5, rtc_micro, uart_micro, molex_4x1, small_encl_satapwr
|
plug - "pwr2.5_5x7.5","pwr5.5_7.5x11.5","pwr5.5_10x10","rtc_micro","audio_micro","uart_micro","molex_4x1","small_encl_satapwr"
|
||||||
usb2 - single_vert_a, double_stacked_a, micro
|
usb2 - "single_vert_a","double_stacked_a","micro"
|
||||||
usb3 - double_stacked_a
|
usb3 - double_stacked_a
|
||||||
network - rj45_single
|
network - rj45_single
|
||||||
video - hdmi_a, dp-hdmi_a
|
video - "hdmi_a","dp-hdmi_a","mipi_csi","mipi_dsi"
|
||||||
fan - micro, encl_pmw, encl_pmw_h
|
fan - "micro","encl_pmw","encl_pmw_h"
|
||||||
gpio - encl_header_30, encl_header_12, header_40, header_20
|
gpio - "encl_header_30","encl_header_12","header_40","header_20"
|
||||||
ic - ic_2.8x2.8, ic_4.7x4.7, ic_5x5, ic_5.75x5.75, ic_6x6, ic_6.75x6.75, ic_7x7, ic_6.7x8.4, ic_11x8, ic_13x8
|
ic - "ic_2.8x2.8","ic_3x3","ic_3.7x3.7","ic_4x4","ic_4.7x4.7","ic_5x5","ic_5.75x5.75","ic_6x6","ic_6.4x6.4",ic_6.75x6.75",
|
||||||
ic_3x3, ic_6.4x6.4, ic_3.7x3.7, ic_4.3x5.1, ic_5.4x5.3, ic_13x9, ic_9x9
|
"ic_7x7","ic_4.3x5.1","ic_5.4x5.3","ic_6.7x8.4","ic_9x9","ic_11x8","ic_13x8","ic_13x9","ic_16x10"
|
||||||
audio - out-in-spdif, jack_3.5
|
audio - "out-in-spdif","jack_3.5"
|
||||||
storage - sata_header, sata_encl_power, sata_encl_header, sata_power_vrec, m.2_header, sdcard, sdcard_i
|
storage - "sdcard","sdcard_i","sata_header","sata_power_vrec","sata_encl_power","sata_encl_header","m.2_header","m.2_stud"
|
||||||
combo - rj45-usb2_double, rj45-usb3_double
|
combo - "rj45-usb2_double","rj45-usb3_double"
|
||||||
jumper - header_2x1, header_5x1, header_7x1
|
jumper - "header_2x1","header_3x2","header_5x1","header_6x1","header_7x1"
|
||||||
misc - ir_1, batt_hold_1
|
misc - "ir_1","led_3x1.5","lcd_2.2","bat_hold_1"
|
||||||
heatsink - xu4_oem, xu4q_oem, c1+_oem, c2_oem, c4_oem, hc4_oem, n2_oem, h2_oem
|
heatsink - "hc4_oem","c4_oem","c2_oem","c1+_oem","xu4_oem","n1_oem","xu4q_oem","n2_oem","n2+_oem","m1_oem","h2_oem"
|
||||||
pcie - x4
|
pcie - "x4"
|
||||||
jst_ph - number of pins from 2-16
|
jst_ph - number of pins from 2-16
|
||||||
|
|
||||||
sbc models "c1+","c2","c4","xu4","xu4q","mc1","hc1","hc4","n1","n2","n2+","h2","rpi3b+","a64","rock64","rockpro64","atomicpi","jetsonnano"
|
sbc models "c1+","c2","c4","xu4","xu4q","mc1","hc1","hc4","n1","n2","n2+","h2","rpi3b+","a64","rock64","rockpro64","atomicpi","jetsonnano"
|
||||||
*/
|
*/
|
||||||
|
|
||||||
sbc_data = [
|
sbc_data = [
|
||||||
|
|
||||||
// Hard Kernel Odroids
|
// Hard Kernel Odroids
|
||||||
["c1+",85,56,1,3.5,17,6, // sbc model, pcb size and component height
|
["c1+",85,56,1,3.5,17,6, // sbc model, pcb size and component height
|
||||||
3.5,3.5,3,3.5,52.5,3, // pcb holes 1 and 2 location and pcb hole size
|
3.5,3.5,3,3.5,52.5,3, // pcb holes 1 and 2 location and pcb hole size
|
||||||
@@ -382,6 +384,43 @@ sbc_data = [
|
|||||||
77.03,51.92,0,"top","ic","ic_3x3", // component, location, rotation, side, class and type
|
77.03,51.92,0,"top","ic","ic_3x3", // component, location, rotation, side, class and type
|
||||||
1,-.5,0,"top","heatsink","n2+_oem"], // heatsink location, rotation, side, class and type
|
1,-.5,0,"top","heatsink","n2+_oem"], // heatsink location, rotation, side, class and type
|
||||||
|
|
||||||
|
["n2+_noheatsink",90,90,1.7,.2,17,14, // sbc model, pcb size and component height
|
||||||
|
3,28.5,3.3,86.5,28.5,3.3, // pcb holes 1 and 2 location and pcb hole size
|
||||||
|
3,86.5,3.3,86.5,86.5,3.3, // pcb holes 3 and 4 location and pcb hole size
|
||||||
|
0,0,0,0,0,0, // pcb holes 5 and 6 location and pcb hole size
|
||||||
|
0,0,0,0,0,0, // pcb holes 7 and 8 location and pcb hole size
|
||||||
|
0,0,0,0,0,0, // pcb holes 9 and 10 location and pcb hole size
|
||||||
|
14.5,16.25,1.51,37.78,50.88,0,0,"bottom", // soc1 size, location, rotation and side
|
||||||
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
|
2.35,-1,0,"top","plug","pwr5.5_7.5x11.5", // power plug location, rotation, side, class and type
|
||||||
|
18,0,0,"top","usb3","double_stacked_a", // usb3 location, rotation, side, class and type
|
||||||
|
36,0,0,"top","usb3","double_stacked_a", // usb3 location, rotation, side, class and type
|
||||||
|
54.5,-1,0,"top","video","hdmi_a", // hdmi location, rotation, side, class and type
|
||||||
|
71.75,0,0,"top","network","rj45_single", // ethernet location, rotation, side, class and type
|
||||||
|
83.96,32.1,90,"top","gpio","header_40", // gpio location, rotation, side, class and type
|
||||||
|
17.61,39.73,0,"top","jumper","header_7x1", // jumper location, rotation, side, class and type
|
||||||
|
.2,69.05,270,"top","plug","uart_micro", // uart location, rotation, side, class and type
|
||||||
|
53,35,0,"top","misc","bat_hold_1", // battery holder, location, rotation, side, class and type
|
||||||
|
68.5,68.8,90,"top","fan","micro", // fan location, rotation, side, class and type
|
||||||
|
7.2,76.82,180,"top","storage","sdcard", // sdcard location, rotation, side, class and type
|
||||||
|
59.35,85.4,180,"top","usb2","micro", // usb2 otg location, rotation, side, class and type
|
||||||
|
35.85,85.62,0,"top","memory","emmc_plug", // emmc plug location, rotation, side, class and type
|
||||||
|
33.5,72,0,"top","memory","emmc", // emmc location, rotation, side, class and type
|
||||||
|
22.4,86.6,180,"top","misc","ir_1", // ir location, rotation, side, class and type
|
||||||
|
48.45,86.7,270,"top","switch","slide_4x9", // switch location, rotation, side, class and type
|
||||||
|
73.67,78.95,180,"top","audio","jack_3.5", // switch location, rotation, side, class and type
|
||||||
|
18.95,46.23,0,"top","ic","ic_13x8", // memory top size, location, rotation and side
|
||||||
|
19.04,64.24,0,"top","ic","ic_13x8", // memory top size, location, rotation and side
|
||||||
|
18.95,46.23,0,"bottom","ic","ic_13x8", // memory bottom size, location, rotation and side
|
||||||
|
19.04,64.24,0,"bottom","ic","ic_13x8", // memory bottom size, location, rotation and side
|
||||||
|
45.74,27.51,0,"top","ic","ic_6.4x6.4", // component, location, rotation, side, class and type
|
||||||
|
75.08,25,0,"top","ic","ic_3.7x3.7", // component, location, rotation, side, class and type
|
||||||
|
74.3,69.54,0,"top","ic","ic_4.3x5.1", // component, location, rotation, side, class and type
|
||||||
|
50.8,77.25,0,"top","ic","ic_5.4x5.3", // component, location, rotation, side, class and type
|
||||||
|
77.03,51.92,0,"top","ic","ic_3x3"], // component, location, rotation, side, class and type
|
||||||
|
|
||||||
["m1",90,122,1.7,.2,17,14, // sbc model, pcb size and component height
|
["m1",90,122,1.7,.2,17,14, // sbc model, pcb size and component height
|
||||||
3,28.5,3,3,118.5,3, // pcb holes 1 and 2 location and pcb hole size
|
3,28.5,3,3,118.5,3, // pcb holes 1 and 2 location and pcb hole size
|
||||||
86.5,118.5,3,,86.5,28.5,3, // pcb holes 3 and 4 location and pcb hole size
|
86.5,118.5,3,,86.5,28.5,3, // pcb holes 3 and 4 location and pcb hole size
|
||||||
@@ -421,6 +460,44 @@ sbc_data = [
|
|||||||
.5,0,0,"top","heatsink","m1_oem", // heatsink location, rotation, side, class and type
|
.5,0,0,"top","heatsink","m1_oem", // heatsink location, rotation, side, class and type
|
||||||
86.5,47,0,"top","storage","m.2_stud"], // m2 stud location, rotation, side, class and type
|
86.5,47,0,"top","storage","m.2_stud"], // m2 stud location, rotation, side, class and type
|
||||||
|
|
||||||
|
["m1_noheatsink",90,122,1.7,.2,17,14, // sbc model, pcb size and component height
|
||||||
|
3,28.5,3,3,118.5,3, // pcb holes 1 and 2 location and pcb hole size
|
||||||
|
86.5,118.5,3,,86.5,28.5,3, // pcb holes 3 and 4 location and pcb hole size
|
||||||
|
3,67,3,66,25,3, // pcb holes 5 and 6 location and pcb hole size
|
||||||
|
86.5,47,3,0,0,0, // pcb holes 7 and 8 location and pcb hole size
|
||||||
|
0,0,0,0,0,0, // pcb holes 9 and 10 location and pcb hole size
|
||||||
|
19,19,1.51,45,43.5,0,45,"bottom", // soc1 size, location, rotation and side
|
||||||
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
|
2.35,-1,0,"top","plug","pwr5.5_7.5x11.5", // power plug location, rotation, side, class and type
|
||||||
|
18,0,0,"top","usb3","double_stacked_a", // usb3 location, rotation, side, class and type
|
||||||
|
36,0,0,"top","usb2","double_stacked_a", // usb3 location, rotation, side, class and type
|
||||||
|
54.5,-1,0,"top","video","hdmi_a", // hdmi location, rotation, side, class and type
|
||||||
|
71.75,0,0,"top","network","rj45_single", // ethernet location, rotation, side, class and type
|
||||||
|
84.375,62.25,90,"top","gpio","header_40", // gpio location, rotation, side, class and type
|
||||||
|
.2,101,270,"top","plug","uart_micro", // uart location, rotation, side, class and type
|
||||||
|
21,88,120,"top","misc","bat_hold_1", // battery holder, location, rotation, side, class and type
|
||||||
|
61,118,0,"top","plug","audio_micro", // micro location, rotation, side, class and type
|
||||||
|
7.2,108.82,180,"top","storage","sdcard", // sdcard location, rotation, side, class and type
|
||||||
|
20,0,0,"bottom","usb2","micro", // usb2 otg location, rotation, side, class and type
|
||||||
|
35.85,117,0,"top","memory","emmc_plug", // emmc plug location, rotation, side, class and type
|
||||||
|
33.5,103,0,"top","memory","emmc", // emmc location, rotation, side, class and type
|
||||||
|
22.4,118.58,180,"top","misc","ir_1", // ir location, rotation, side, class and type
|
||||||
|
73.73,111.5,180,"top","audio","jack_3.5", // audio jack location, rotation, side, class and type
|
||||||
|
0,88.2,270,"top","plug","small_encl_satapwr", // pwrplug location, rotation, side, class and type
|
||||||
|
.25,72,270,"top","storage","sata_header", // sata location, rotation, side, class and type
|
||||||
|
50,115.65,0,"top","button","momentary_6x6x4", // spi button location, rotation, side, class and type
|
||||||
|
7,101,0,"top","jumper","header_2x1", // jumper location, rotation, side, class and type
|
||||||
|
7,103.5,0,"top","jumper","header_2x1", // jumper location, rotation, side, class and type
|
||||||
|
3.5,35.87,270,"top","storage","m.2_header", // m2 socket location, rotation, side, class and type
|
||||||
|
36.28,73,0,"bottom","ic","ic_16x10", // memory bottom size, location, rotation and side
|
||||||
|
75.75,25,0,"top","ic","ic_5x5", // ic bottom size, location, rotation and side
|
||||||
|
50.5,109.22,0,"top","ic","ic_5x5", // ic bottom size, location, rotation and side
|
||||||
|
58,72,0,"top","video","mipi_csi", // mipi csi size, location, rotation and side
|
||||||
|
65,93,0,"top","video","mipi_dsi", // mipi dsi size, location, rotation and side
|
||||||
|
86.5,47,0,"top","storage","m.2_stud"], // m2 stud location, rotation, side, class and type
|
||||||
|
|
||||||
["h2",110,110,2,3.5,38,11, // sbc model, pcb size and component height
|
["h2",110,110,2,3.5,38,11, // sbc model, pcb size and component height
|
||||||
3.81,17.78,3.5,3.81,106.19,3.5, // pcb holes 1 and 2 location and pcb hole size
|
3.81,17.78,3.5,3.81,106.19,3.5, // pcb holes 1 and 2 location and pcb hole size
|
||||||
106.04,24.77,3.5,106.04,106.2,3.5, // pcb holes 3 and 4 location and pcb hole size
|
106.04,24.77,3.5,106.04,106.2,3.5, // pcb holes 3 and 4 location and pcb hole size
|
||||||
@@ -635,45 +712,5 @@ sbc_data = [
|
|||||||
0,0,0,0,0,0,0,"", // soc2 size, location, rotation and side
|
0,0,0,0,0,0,0,"", // soc2 size, location, rotation and side
|
||||||
0,0,0,0,0,0,0,"", // soc3 size, location, rotation and side
|
0,0,0,0,0,0,0,"", // soc3 size, location, rotation and side
|
||||||
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
0,0,0,0,0,0,0,"", // soc4 size, location, rotation and side
|
||||||
10, -1.5, 0, "top", "video", "hdmi_a", // hdmi port
|
|
||||||
-1.5, 30, 90, "top", "video", "hdmi_a", // hdmi port
|
|
||||||
10, 69, 180, "top", "video", "hdmi_a", // hdmi port
|
|
||||||
117, 30, 270, "top", "video", "hdmi_a", // hdmi port
|
|
||||||
|
|
||||||
30, -1, 0, "top", "usb2", "micro", // usb2 micro port
|
|
||||||
-1, 10, 90, "top", "usb2", "micro", // usb2 micro port
|
|
||||||
30, 75.5, 180, "top", "usb2", "micro", // usb2 micro port
|
|
||||||
123.5, 10, 270, "top", "usb2", "micro", // usb2 micro port
|
|
||||||
|
|
||||||
// 50, -1, 0, "top", "plug", "pwr5.5_7.5x11.5", // pwr5.5_7.5x11.5
|
|
||||||
// -1, 2, 90, "top", "plug", "pwr5.5_7.5x11.5", // pwr5.5_7.5x11.5
|
|
||||||
// 50, 69, 180, "top", "plug", "pwr5.5_7.5x11.5", // pwr5.5_7.5x11.5
|
|
||||||
// 116.5, 2, 270, "top", "plug", "pwr5.5_7.5x11.5", // pwr5.5_7.5x11.5
|
|
||||||
|
|
||||||
// 50, -1, 0, "top", "plug", "pwr2.5_5x7.5", // pwr5.5_7.5x11.5
|
|
||||||
// -1, 2, 90, "top", "plug", "pwr2.5_5x7.5", // pwr5.5_7.5x11.5
|
|
||||||
// 50, 72.5, 180, "top", "plug", "pwr2.5_5x7.5", // pwr5.5_7.5x11.5
|
|
||||||
// 120.5, 2, 270, "top", "plug", "pwr2.5_5x7.5", // pwr5.5_7.5x11.5
|
|
||||||
|
|
||||||
// 50, -1, 0, "top", "plug", "pwr5.5_10x10", // pwr5.5_10x10
|
|
||||||
// -1, 2, 90, "top", "plug", "pwr5.5_10x10", // pwr5.5_10x10
|
|
||||||
// 50, 67, 180, "top", "plug", "pwr5.5_10x10", // pwr5.5_10x10
|
|
||||||
// 114.5, 2, 270, "top", "plug", "pwr5.5_10x10", // pwr5.5_10x10
|
|
||||||
|
|
||||||
// 60, -1, 0, "top", "network", "rj45_single", // rj45_single
|
|
||||||
// -1, 47, 90, "top", "network", "rj45_single", // rj45_single
|
|
||||||
// 60, 59, 180, "top", "network", "rj45_single", // rj45_single
|
|
||||||
// 107, 50, 270, "top", "network", "rj45_single", // rj45_single
|
|
||||||
|
|
||||||
// 80, -1, 0, "top", "usb2", "double_stacked_a", // double_stacked_a
|
|
||||||
// -1, 47, 90, "top", "usb2", "double_stacked_a", // double_stacked_a
|
|
||||||
// 80, 63, 180, "top", "usb2", "double_stacked_a", // double_stacked_a
|
|
||||||
// 110.5, 50, 270, "top", "usb2", "double_stacked_a", // double_stacked_a
|
|
||||||
|
|
||||||
100, -1, 0, "top", "usb2", "single_vert_a", // single_vert_a
|
|
||||||
-1, 67, 90, "top", "usb2", "single_vert_a", // single_vert_a
|
|
||||||
60, 61, 180, "top", "usb2", "single_vert_a", // single_vert_a
|
|
||||||
108.5, 67, 270, "top", "usb2", "single_vert_a", // single_vert_a
|
|
||||||
|
|
||||||
0,0,0,"","",""] // component, location, rotation, side, class and type
|
0,0,0,"","",""] // component, location, rotation, side, class and type
|
||||||
];
|
];
|
||||||
|
|||||||
@@ -1,6 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
SBC Models Copyright 2016,2017,2018,2019,2020 Edward A. Kisiel
|
SBC Models Copyright 2016,2017,2018,2019,2020,2021,2022 Edward A. Kisiel hominoid@cablemi.com
|
||||||
hominoid @ www.forum.odroid.com
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
This program is free software: you can redistribute it and/or modify
|
||||||
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
||||||
@@ -29,6 +28,8 @@
|
|||||||
20220202 Version 1.0.5 Added HK Show2 as "show2"
|
20220202 Version 1.0.5 Added HK Show2 as "show2"
|
||||||
20220413 Version 1.0.6 Added Odroid-M1 as "m1"
|
20220413 Version 1.0.6 Added Odroid-M1 as "m1"
|
||||||
|
|
||||||
|
see https://github.com/hominoids/SBC_Case_Builder
|
||||||
|
|
||||||
USE: sbc(model)
|
USE: sbc(model)
|
||||||
model = "c1+","c2","c4","xu4","xu4q","mc1","hc1","hc4","n1","n2","n2+","h2"
|
model = "c1+","c2","c4","xu4","xu4q","mc1","hc1","hc4","n1","n2","n2+","h2"
|
||||||
"rpi3b+","a64","rock64","rockpro64","atomicpi","jetsonnano","show2"
|
"rpi3b+","a64","rock64","rockpro64","atomicpi","jetsonnano","show2"
|
||||||
|
|||||||
@@ -1,6 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
SBC Case Builder Copyright 2022 Edward A. Kisiel
|
SBC Case Builder Copyright 2022 Edward A. Kisiel hominoid@cablemi.com
|
||||||
hominoid @ www.forum.odroid.com
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
This program is free software: you can redistribute it and/or modify
|
||||||
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
||||||
@@ -28,6 +27,7 @@
|
|||||||
c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boombox
|
c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boombox
|
||||||
20220406 Version 1.2.2 various case adjustments
|
20220406 Version 1.2.2 various case adjustments
|
||||||
|
|
||||||
|
see https://github.com/hominoids/SBC_Case_Builder
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/* Instructions: All measurements from lower left corner of PCB to lower left
|
/* Instructions: All measurements from lower left corner of PCB to lower left
|
||||||
@@ -1388,7 +1388,40 @@ case_data = [
|
|||||||
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
"sub","rectangle",17.5,36,28.5,"top",[0,0,0],62,43,4,0,0,"",[1,1,1,1]], // sub heatsink opening
|
"sub","rectangle",17.5,36.375,28.5,"top",[0,0,0],62,43,4,0,0,"",[1,1,1,1]], // sub heatsink opening
|
||||||
|
|
||||||
|
["jetsonnano_panel","jetsonnano","panel","none", // case_name, sbc_model, case_design, case_style
|
||||||
|
0,0,0,0,0,-5,3, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
2,2,2,1.5,[3,0], // wallthick,floorthick,sidethick,gap,fillet
|
||||||
|
false,false,false,true,true, // indents,sidewall_support,sbc_top_standoffs,sbc_bottom_standoffs,case_ext_standoffs
|
||||||
|
false,"vent","fan","vent","true", // sata_punchout,gpio_opening,cooling,exhaust_vents,mode
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,0,4.5,5.1], // top_pcb_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","rectangle",17.5,36.375,28.5,"top",[0,0,0],62,43,4,0,0,"",[1,1,1,1]], // sub heatsink opening
|
||||||
|
|
||||||
|
["jetsonnano_stacked","jetsonnano","stacked","none", // case_name, sbc_model, case_design, case_style
|
||||||
|
0,0,0,0,0,-5,3, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
2,2,2,1.5,[3,0], // wallthick,floorthick,sidethick,gap,fillet
|
||||||
|
false,false,true,true,true, // indents,sidewall_support,sbc_top_standoffs,sbc_bottom_standoffs,case_ext_standoffs
|
||||||
|
false,"vent","fan","vent","true", // sata_punchout,gpio_opening,cooling,exhaust_vents,mode
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,0,4.5,5.1], // top_pcb_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","rectangle",17.5,36.375,28.5,"top",[0,0,0],62,43,4,0,0,"",[1,1,1,1]], // sub heatsink opening
|
||||||
|
|
||||||
|
["jetsonnano_tray","jetsonnano","tray","none", // case_name, sbc_model, case_design, case_style
|
||||||
|
0,0,0,0,0,-5,3, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
2,2,2,1.5,[3,0], // wallthick,floorthick,sidethick,gap,fillet
|
||||||
|
false,false,false,true,true, // indents,sidewall_support,sbc_top_standoffs,sbc_bottom_standoffs,case_ext_standoffs
|
||||||
|
false,"vent","fan","vent","true", // sata_punchout,gpio_opening,cooling,exhaust_vents,mode
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,0,4.5,5.1], // top_pcb_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","rectangle",17.5,36.375,28.5,"top",[0,0,0],62,43,8,0,0,"",[1,1,1,1]], // sub heatsink opening
|
||||||
|
|
||||||
["rockpro64_shell","rockpro64","shell","none", // case_name, sbc_model, case_design, case_style
|
["rockpro64_shell","rockpro64","shell","none", // case_name, sbc_model, case_design, case_style
|
||||||
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
@@ -1399,8 +1432,45 @@ case_data = [
|
|||||||
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","fan",43,26,25,"top",[0,0,0],40,0,6,2,0,"",0, // sub fan opening
|
||||||
|
"sub","rectangle",43,0,25,"top",[0,0,0],40,10,6,0,0,"",[1,1,1,1]], // sub pcie opening
|
||||||
|
|
||||||
|
["rockpro64_panel","rockpro64","panel","none", // case_name, sbc_model, case_design, case_style
|
||||||
|
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
2,2,2,1.5,[3,3], // wallthick,floorthick,sidethick,gap,fillet
|
||||||
|
false,false,false,true,true, // indents,sidewall_support,sbc_top_standoffs,sbc_bottom_standoffs,case_ext_standoffs
|
||||||
|
false,"vent","fan","vent","true", // sata_punchout,gpio_opening,cooling,exhaust_vents,mode
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,0,4.5,5.1], // top_pcb_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","fan",43,26,24,"top",[0,0,0],40,0,6,2,0,"",0, // sub fan opening
|
||||||
"sub","rectangle",43,0,24.5,"top",[0,0,0],40,10,6,0,0,"",[1,1,1,1]], // sub pcie opening
|
"sub","rectangle",43,0,24.5,"top",[0,0,0],40,10,6,0,0,"",[1,1,1,1]], // sub pcie opening
|
||||||
|
|
||||||
|
["rockpro64_stacked","rockpro64","stacked","none", // case_name, sbc_model, case_design, case_style
|
||||||
|
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
2,2,2,1.5,[3,3], // wallthick,floorthick,sidethick,gap,fillet
|
||||||
|
false,true,true,true,true, // indents,sidewall_support,sbc_top_standoffs,sbc_bottom_standoffs,case_ext_standoffs
|
||||||
|
false,"vent","fan","vent","true", // sata_punchout,gpio_opening,cooling,exhaust_vents,mode
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,0,4.5,5.1], // top_pcb_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","fan",43,26,24,"top",[0,0,0],40,0,6,2,0,"",0, // sub fan opening
|
||||||
|
"sub","rectangle",43,0,24.5,"top",[0,0,0],40,10,6,0,0,"",[1,1,1,1]], // sub pcie opening
|
||||||
|
|
||||||
|
["rockpro64_tray","rockpro64","tray","none", // case_name, sbc_model, case_design, case_style
|
||||||
|
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
2,2,2,1.5,[3,3], // wallthick,floorthick,sidethick,gap,fillet
|
||||||
|
false,true,false,true,true, // indents,sidewall_support,sbc_top_standoffs,sbc_bottom_standoffs,case_ext_standoffs
|
||||||
|
false,"vent","fan","vent","true", // sata_punchout,gpio_opening,cooling,exhaust_vents,mode
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,0,4.5,5.1], // top_pcb_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,1,0,0,0,4.5,5.1], // bottom_pcb_standoff
|
||||||
|
[6.75,15,2.5,10,4,4,0,1,1,4.5,5.1], // top_ext_standoff
|
||||||
|
[6.75,11.4,3.6,10,4,2,0,0,0,4.5,5.1], // bottom_ext_standoff
|
||||||
|
"sub","fan",43,26,25,"top",[0,0,0],40,0,6,2,0,"",0, // sub fan opening
|
||||||
|
"sub","rectangle",43,0,24.5,"top",[0,0,0],40,10,8,0,0,"",[1,1,1,1]], // sub pcie opening
|
||||||
|
|
||||||
|
|
||||||
["test","test","shell","none", // case_name, sbc_model, case_design, case_style
|
["test","test","shell","none", // case_name, sbc_model, case_design, case_style
|
||||||
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
0,0,0,0,0,0,0, // pcb_loc_x,pcb_loc_y,pcb_loc_z,case_offset_x,case_offset_y,case_offset_tz,case_offset_bz,
|
||||||
|
|||||||
@@ -1,6 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
SBC Case Builder Copyright 2022 Edward A. Kisiel
|
SBC Case Builder Copyright 2022 Edward A. Kisiel hominoid@cablemi.com
|
||||||
hominoid @ www.forum.odroid.com
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
This program is free software: you can redistribute it and/or modify
|
||||||
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
||||||
@@ -33,6 +32,7 @@
|
|||||||
enabled pcb_z, added tabs and fixed tray case top, other fixes and maintenance
|
enabled pcb_z, added tabs and fixed tray case top, other fixes and maintenance
|
||||||
20220406 Version 1.2.2 added vu7c, vu8m and weatherboard2 models, other additions, fixes and maintenance
|
20220406 Version 1.2.2 added vu7c, vu8m and weatherboard2 models, other additions, fixes and maintenance
|
||||||
|
|
||||||
|
see https://github.com/hominoids/SBC_Case_Builder
|
||||||
*/
|
*/
|
||||||
|
|
||||||
use <./lib/sbc_models.scad>;
|
use <./lib/sbc_models.scad>;
|
||||||
|
|||||||
@@ -1,5 +1,5 @@
|
|||||||
/*
|
/*
|
||||||
SBC Case Builder Library Copyright 2022 Edward A. Kisiel, hominoid @ www.forum.odroid.com
|
SBC Case Builder Library Copyright 2022 Edward A. Kisiel hominoid@cablemi.com
|
||||||
|
|
||||||
Contributions:
|
Contributions:
|
||||||
hk_vu8m(brackets),u_bracket(),screw(),m1_hdmount() Copyright 2022 Tomek Szczęsny, mctom @ www.forum.odroid.com
|
hk_vu8m(brackets),u_bracket(),screw(),m1_hdmount() Copyright 2022 Tomek Szczęsny, mctom @ www.forum.odroid.com
|
||||||
@@ -42,10 +42,11 @@
|
|||||||
adjusted access_port(), access_cover(), added @mctom's hk_vu8m(bracket), u_bracket(), spacer()
|
adjusted access_port(), access_cover(), added @mctom's hk_vu8m(bracket), u_bracket(), spacer()
|
||||||
2022xxxx version 1.2.x removed spacer(); added screw(); modified hk_vu8m(); added m1_hdmount(); added hdd35_25holder(length)
|
2022xxxx version 1.2.x removed spacer(); added screw(); modified hk_vu8m(); added m1_hdmount(); added hdd35_25holder(length)
|
||||||
|
|
||||||
|
see https://github.com/hominoids/SBC_Case_Builder
|
||||||
|
|
||||||
place(x,y,z,size_x,size_y,rotation,side)
|
place(x,y,z,size_x,size_y,rotation,side)
|
||||||
add(type,loc_x,loc_y,loc_z,size_x,size_y,size_z,rotation,face,side,case_z,data_1,data_2,data_3,data_4)
|
add(type,loc_x,loc_y,loc_z,size_x,size_y,size_z,rotation,face,side,case_z,data_1,data_2,data_3,data_4)
|
||||||
sub(type,loc_x,loc_y,loc_z,size_x,size_y,size_z,rotation,face,side,case_z,data_1,data_2,data_3,data_4)
|
sub(type,loc_x,loc_y,loc_z,size_x,size_y,size_z,rotation,face,side,case_z,data_1,data_2,data_3,data_4)
|
||||||
|
|
||||||
art(scale_d1,type,size_z)
|
art(scale_d1,type,size_z)
|
||||||
screw(screw[d, l, style])
|
screw(screw[d, l, style])
|
||||||
slab(size, radius)
|
slab(size, radius)
|
||||||
@@ -110,7 +111,6 @@
|
|||||||
mask(loc_x,loc_y,rotation,side,class,type,case_z,wallthick,gap,floorthick,pcb_z)
|
mask(loc_x,loc_y,rotation,side,class,type,case_z,wallthick,gap,floorthick,pcb_z)
|
||||||
punchout(width,depth,gap,thick,fillet,shape)
|
punchout(width,depth,gap,thick,fillet,shape)
|
||||||
|
|
||||||
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
use <./lib/fillets.scad>;
|
use <./lib/fillets.scad>;
|
||||||
@@ -2541,42 +2541,70 @@ module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,
|
|||||||
}
|
}
|
||||||
// emmc storage
|
// emmc storage
|
||||||
if(type == "emmc" && side == "bottom" && rotation == 0) {
|
if(type == "emmc" && side == "bottom" && rotation == 0) {
|
||||||
place(loc_x-.5,loc_y,floorthick+adjust,14.5,19,rotation,side)
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
||||||
cube([14.5,19,floorthick+(2*adjust)]);
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
||||||
}
|
}
|
||||||
if(type == "emmc" && side == "bottom" && rotation == 90) {
|
if(type == "emmc" && side == "bottom" && rotation == 90) {
|
||||||
place(loc_x,loc_y-.5,floorthick+adjust,14.5,19,rotation,side)
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
||||||
cube([14.5,19,floorthick+(2*adjust)]);
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
||||||
|
}
|
||||||
|
if(type == "emmc" && side == "bottom" && rotation == 180) {
|
||||||
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
||||||
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
||||||
|
}
|
||||||
|
if(type == "emmc" && side == "bottom" && rotation == 270) {
|
||||||
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
||||||
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
||||||
}
|
}
|
||||||
// sd storage
|
// sd storage
|
||||||
if(type == "sdcard" && side == "bottom" && rotation == 0) {
|
if(type == "sdcard" && side == "bottom" && rotation == 0) {
|
||||||
place(loc_x,loc_y,loc_z,12,15.5,rotation,side)
|
place(loc_x,loc_y-5,loc_z,12,15.5,rotation,side)
|
||||||
translate([-1,-10,3.5]) cube([13,15.5,2]);
|
translate([-1,-10,3.5]) cube([13,15.5,2]);
|
||||||
}
|
}
|
||||||
if(type == "sdcard" && side == "bottom" && rotation == 90) {
|
if(type == "sdcard" && side == "bottom" && rotation == 90) {
|
||||||
place(loc_x+(2*(wallthick+gap+adjust)),loc_y,loc_z-2.75,12,15.5,rotation,side)
|
place(loc_x+5,loc_y,loc_z-2.75,12,15.5,rotation,side)
|
||||||
cube([12,15.5,2]);
|
cube([12,15.5,2]);
|
||||||
}
|
}
|
||||||
if(type == "sdcard" && side == "bottom" && rotation == 180) {
|
if(type == "sdcard" && side == "bottom" && rotation == 180) {
|
||||||
place(loc_x,loc_y+(2*(wallthick+gap+adjust)),loc_z-2.75,12,15.5,rotation,side)
|
place(loc_x,loc_y+5,loc_z-2.75,12,15.5,rotation,side)
|
||||||
cube([12,15.5,2]);
|
cube([12,15.5,2]);
|
||||||
}
|
}
|
||||||
if(type == "sdcard_i" && side == "bottom" && rotation == 180) {
|
|
||||||
place(loc_x,loc_y+(2*(wallthick+gap+adjust)),floorthick+adjust+4,12,18.5,rotation,side)
|
|
||||||
cube([12,18.5,floorthick+(2*adjust)+4]);
|
|
||||||
}
|
|
||||||
if(type == "sdcard" && side == "bottom" && rotation == 270) {
|
if(type == "sdcard" && side == "bottom" && rotation == 270) {
|
||||||
place(loc_x,loc_y,loc_z,12,15.5,rotation,side)
|
place(loc_x+5,loc_y,loc_z,12,15.5,rotation,side)
|
||||||
translate([0,-18,2.75]) cube([12,15.5,2]);
|
translate([0,-18,2.75]) cube([12,15.5,2]);
|
||||||
}
|
}
|
||||||
if(type == "sdcard" && side == "top" && rotation == 0) {
|
if(type == "sdcard" && side == "top" && rotation == 0) {
|
||||||
place(loc_x,loc_y-17,loc_z,12,15.5,rotation,side)
|
place(loc_x,loc_y-15,loc_z,12,15.5,rotation,side)
|
||||||
|
translate([0,0,1.75]) cube([12,15.5,2]);
|
||||||
|
}
|
||||||
|
if(type == "sdcard" && side == "top" && rotation == 90) {
|
||||||
|
place(loc_x-15,loc_y-.5,loc_z,12,15.5,rotation,side)
|
||||||
translate([0,0,1.75]) cube([12,15.5,2]);
|
translate([0,0,1.75]) cube([12,15.5,2]);
|
||||||
}
|
}
|
||||||
if(type == "sdcard" && side == "top" && rotation == 180) {
|
if(type == "sdcard" && side == "top" && rotation == 180) {
|
||||||
place(loc_x,loc_y+4,loc_z,12,15.5,rotation,side)
|
place(loc_x-.5,loc_y+5,loc_z,12,15.5,rotation,side)
|
||||||
translate([0,0,1.75]) cube([12,15.5,2]);
|
translate([0,0,1.75]) cube([12,15.5,2]);
|
||||||
}
|
}
|
||||||
|
if(type == "sdcard" && side == "top" && rotation == 270) {
|
||||||
|
place(loc_x+5,loc_y,loc_z,12,15.5,rotation,side)
|
||||||
|
translate([0,0,1.75]) cube([12,15.5,2]);
|
||||||
|
}
|
||||||
|
if(type == "sdcard_i" && side == "bottom" && rotation == 0) {
|
||||||
|
place(loc_x,loc_y-18.5,floorthick+adjust+4,12,18.5,rotation,side)
|
||||||
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
||||||
|
}
|
||||||
|
if(type == "sdcard_i" && side == "bottom" && rotation == 90) {
|
||||||
|
place(loc_x+5.5,loc_y-.25,floorthick+adjust+4,12,18.5,rotation,side)
|
||||||
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
||||||
|
}
|
||||||
|
if(type == "sdcard_i" && side == "bottom" && rotation == 180) {
|
||||||
|
place(loc_x,loc_y+5.5,floorthick+adjust+4,12,18.5,rotation,side)
|
||||||
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
||||||
|
}
|
||||||
|
if(type == "sdcard_i" && side == "bottom" && rotation == 270) {
|
||||||
|
place(loc_x-18.5,loc_y-.25,floorthick+adjust+4,12,18.5,rotation,side)
|
||||||
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
||||||
|
}
|
||||||
// rj45 opening
|
// rj45 opening
|
||||||
if(type == "rj45_single" && rotation == 0) {
|
if(type == "rj45_single" && rotation == 0) {
|
||||||
place(loc_x,loc_y-6,loc_z,16,17.5,rotation,side)
|
place(loc_x,loc_y-6,loc_z,16,17.5,rotation,side)
|
||||||
@@ -2629,61 +2657,185 @@ module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,
|
|||||||
cube([6.5,8,15]);
|
cube([6.5,8,15]);
|
||||||
}
|
}
|
||||||
// ir opening
|
// ir opening
|
||||||
if(type == "ir_1") {
|
if(type == "ir_1" && rotation == 0) {
|
||||||
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
translate([2.5,wallthick+gap,7.5]) rotate([90,0,0]) cylinder(d=6, h=9);
|
translate([3.5,2,7.5]) rotate([90,0,0]) cylinder(d=6, h=9);
|
||||||
|
}
|
||||||
|
if(type == "ir_1" && rotation == 90) {
|
||||||
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
|
translate([2.5,2,7.5]) rotate([90,0,0]) cylinder(d=6, h=9);
|
||||||
|
}
|
||||||
|
if(type == "ir_1" && rotation == 180) {
|
||||||
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
|
translate([2.5,5,7.5]) rotate([90,0,0]) cylinder(d=6, h=9);
|
||||||
|
}
|
||||||
|
if(type == "ir_1" && rotation == 270) {
|
||||||
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
|
translate([3.375,5,7.5]) rotate([90,0,0]) cylinder(d=6, h=9);
|
||||||
}
|
}
|
||||||
// switch opening
|
// switch opening
|
||||||
if(type == "slide_4x9" && rotation == 0) {
|
if(type == "slide_4x9" && rotation == 0) {
|
||||||
place(loc_x+(wallthick+gap+adjust),loc_y,loc_z,4,9.1,rotation,side)
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
||||||
translate([0,0,.5]) cube([15.75,9.1,4]);
|
translate([0,-6,.25]) cube([9,8,4]);
|
||||||
|
}
|
||||||
|
if(type == "slide_4x9" && rotation == 90) {
|
||||||
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
||||||
|
translate([-5,-6,.25]) cube([9,8,4]);
|
||||||
|
}
|
||||||
|
if(type == "slide_4x9" && rotation == 180) {
|
||||||
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
||||||
|
translate([-5,-.5,.25]) cube([9,8,4]);
|
||||||
}
|
}
|
||||||
if(type == "slide_4x9" && rotation == 270) {
|
if(type == "slide_4x9" && rotation == 270) {
|
||||||
place(loc_x,loc_y,loc_z,4,9.1,rotation,side)
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
||||||
translate([0,0,.5]) cube([15.75,9.1,4]);
|
translate([0,-.75,.25]) cube([9,8,4]);
|
||||||
}
|
}
|
||||||
// rj45-usb2_double opening
|
// rj45-usb2_double opening
|
||||||
if(type == "rj45-usb2_double" && rotation == 0) {
|
if(type == "rj45-usb2_double" && rotation == 0) {
|
||||||
place(loc_x,loc_y-2*(wallthick+gap)-adjust,loc_z,19,28,rotation,side)
|
place(loc_x,loc_y-6,loc_z,19,28,rotation,side)
|
||||||
cube([19,28,31]);
|
cube([19,8,31]);
|
||||||
|
}
|
||||||
|
if(type == "rj45-usb2_double" && rotation == 90) {
|
||||||
|
place(loc_x-6,loc_y,loc_z,19,28,rotation,side)
|
||||||
|
cube([19,8,31]);
|
||||||
|
}
|
||||||
|
if(type == "rj45-usb2_double" && rotation == 180) {
|
||||||
|
place(loc_x,loc_y+6,loc_z,19,28,rotation,side)
|
||||||
|
cube([19,8,31]);
|
||||||
|
}
|
||||||
|
if(type == "rj45-usb2_double" && rotation == 270) {
|
||||||
|
place(loc_x+6,loc_y,loc_z,19,28,rotation,side)
|
||||||
|
cube([19,8,31]);
|
||||||
}
|
}
|
||||||
// rj45-usb3_double opening
|
// rj45-usb3_double opening
|
||||||
if(type == "rj45-usb3_double" && rotation == 0) {
|
if(type == "rj45-usb3_double" && rotation == 0) {
|
||||||
place(loc_x,loc_y-2*(wallthick+gap)-adjust,loc_z,19.5,28,rotation,side)
|
place(loc_x-.25,loc_y-6,loc_z,19.5,28,rotation,side)
|
||||||
cube([19.5,28,31]);
|
cube([19.5,8,31.25]);
|
||||||
|
}
|
||||||
|
if(type == "rj45-usb3_double" && rotation == 90) {
|
||||||
|
place(loc_x-6,loc_y-.25,loc_z,19.5,28,rotation,side)
|
||||||
|
cube([19.5,8,31.25]);
|
||||||
|
}
|
||||||
|
if(type == "rj45-usb3_double" && rotation == 180) {
|
||||||
|
place(loc_x+.25,loc_y+6,loc_z,19.5,28,rotation,side)
|
||||||
|
cube([19.5,8,31.25]);
|
||||||
|
}
|
||||||
|
if(type == "rj45-usb3_double" && rotation == 270) {
|
||||||
|
place(loc_x+6,loc_y-.25,loc_z,19.5,28,rotation,side)
|
||||||
|
cube([19.5,8,31.25]);
|
||||||
}
|
}
|
||||||
// out-in-spdif opening
|
// out-in-spdif opening
|
||||||
if(type == "out-in-spdif" && rotation == 0) {
|
if(type == "out-in-spdif" && rotation == 0) {
|
||||||
place(loc_x,loc_y-2*(wallthick+gap)-adjust,loc_z,13,21.65,rotation,side)
|
place(loc_x-.1,loc_y-6,loc_z,13,21.65,rotation,side)
|
||||||
cube([13,21.65,35.5]);
|
cube([13,8,35.5]);
|
||||||
|
}
|
||||||
|
if(type == "out-in-spdif" && rotation == 90) {
|
||||||
|
place(loc_x-6,loc_y-.1,loc_z,13,21.65,rotation,side)
|
||||||
|
cube([13,8,35.5]);
|
||||||
|
}
|
||||||
|
if(type == "out-in-spdif" && rotation == 180) {
|
||||||
|
place(loc_x-.2,loc_y+6,loc_z,13,21.65,rotation,side)
|
||||||
|
cube([13,8,35.5]);
|
||||||
|
}
|
||||||
|
if(type == "out-in-spdif" && rotation == 270) {
|
||||||
|
place(loc_x+6,loc_y-.1,loc_z,13,21.65,rotation,side)
|
||||||
|
cube([13,8,35.5]);
|
||||||
}
|
}
|
||||||
// dp-hdmi_a opening
|
// dp-hdmi_a opening
|
||||||
if(type == "dp-hdmi_a" && rotation == 0) {
|
if(type == "dp-hdmi_a" && rotation == 0) {
|
||||||
place(loc_x-.5,loc_y-2*(wallthick+gap)-adjust,loc_z,19,18,rotation,side)
|
place(loc_x-.5,loc_y-6,loc_z,19,18,rotation,side)
|
||||||
cube([19,18,19]);
|
cube([19,8,19.25]);
|
||||||
|
}
|
||||||
|
if(type == "dp-hdmi_a" && rotation == 90) {
|
||||||
|
place(loc_x-6,loc_y-.5,loc_z,19,18,rotation,side)
|
||||||
|
cube([19,8,19.25]);
|
||||||
|
}
|
||||||
|
if(type == "dp-hdmi_a" && rotation == 180) {
|
||||||
|
place(loc_x-.5,loc_y+6,loc_z,19,18,rotation,side)
|
||||||
|
cube([19,8,19.25]);
|
||||||
|
}
|
||||||
|
if(type == "dp-hdmi_a" && rotation == 270) {
|
||||||
|
place(loc_x+6,loc_y-.5,loc_z,19,18,rotation,side)
|
||||||
|
cube([19,8,19.25]);
|
||||||
}
|
}
|
||||||
// sata_encl_power opening
|
// sata_encl_power opening
|
||||||
if(type == "sata_encl_power" && rotation == 0) {
|
if(type == "sata_encl_power" && rotation == 0) {
|
||||||
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
||||||
translate([1,9.5+adjust,3]) rotate([90,0,0]) slot(7.5,38.5,wallthick+2*adjust);
|
translate([1,14,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
||||||
|
}
|
||||||
|
if(type == "sata_encl_power" && rotation == 90) {
|
||||||
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
||||||
|
translate([-1,14,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
||||||
|
}
|
||||||
|
if(type == "sata_encl_power" && rotation == 180) {
|
||||||
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
||||||
|
translate([-1,8,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
||||||
|
}
|
||||||
|
if(type == "sata_encl_power" && rotation == 270) {
|
||||||
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
||||||
|
translate([1,8,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
||||||
}
|
}
|
||||||
// audio jack opening
|
// audio jack opening
|
||||||
|
if(type == "jack_3.5" && rotation == 0) {
|
||||||
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||||
|
union() {
|
||||||
|
translate([3.25,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([-.5,-.5,0]) cube([7.5,2.5,4.5]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if(type == "jack_3.5" && rotation == 90) {
|
||||||
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||||
|
union() {
|
||||||
|
translate([4.1,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([.5,-.5,0]) cube([7.5,2.5,4.5]);
|
||||||
|
}
|
||||||
|
}
|
||||||
if(type == "jack_3.5" && rotation == 180) {
|
if(type == "jack_3.5" && rotation == 180) {
|
||||||
place(loc_x,loc_y+wallthick+gap,loc_z,7.5,7.5,rotation,side)
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||||
translate([4,0,2.25]) rotate([90,0,0]) cylinder(d=5, h=9);
|
union() {
|
||||||
|
translate([4.1,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([.5,-5,0]) cube([7.5,2.5,4.5]);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
if(type == "jack_3.5" && rotation == 270) {
|
if(type == "jack_3.5" && rotation == 270) {
|
||||||
place(loc_x,loc_y+wallthick+gap,loc_z,5,5,rotation,side)
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||||
translate([-.5,-6,2]) rotate([90,0,0]) cylinder(d=5, h=9);
|
union() {
|
||||||
|
translate([3,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([-.5,-5,0]) cube([7.5,2.5,4.5]);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
// button opening
|
// button opening
|
||||||
if(type == "momentary_6x6x4") {
|
if(type == "momentary_6x6x4") {
|
||||||
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
translate([3,3,5]) rotate([0,0,0]) cylinder(d=5, h=50);
|
translate([3,3,4]) rotate([0,0,0]) cylinder(d=5, h=50);
|
||||||
|
}
|
||||||
|
if(type == "momentary_6x6x4_90" && rotation == 0) {
|
||||||
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
|
union() {
|
||||||
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if(type == "momentary_6x6x4_90" && rotation == 90) {
|
||||||
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
|
union() {
|
||||||
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if(type == "momentary_6x6x4_90" && rotation == 180) {
|
||||||
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
|
union() {
|
||||||
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
if(type == "momentary_6x6x4_90" && rotation == 270) {
|
if(type == "momentary_6x6x4_90" && rotation == 270) {
|
||||||
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||||
translate([3,-3,3]) rotate([90,0,0]) cylinder(d=5, h=10);
|
union() {
|
||||||
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||||
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
Reference in New Issue
Block a user