refinement and fixes for folded cases with ui improvements
This commit is contained in:
Edward Kisiel
@@ -17,11 +17,13 @@
|
|||||||
|
|
||||||
|
|
||||||
NAME: case_folded
|
NAME: case_folded
|
||||||
DESCRIPTION: creates folded case flat blank for supported designs
|
DESCRIPTION: creates folded case flat blanks for supported designs
|
||||||
TODO: none
|
TODO: none
|
||||||
|
|
||||||
USAGE: case_folded(case_design, case_style)
|
USAGE: case_folded(case_design, case_style)
|
||||||
|
|
||||||
|
case_design = paper
|
||||||
|
case_style = split-top, full-top
|
||||||
*/
|
*/
|
||||||
|
|
||||||
module case_folded(case_design, case_style) {
|
module case_folded(case_design, case_style) {
|
||||||
@@ -29,7 +31,7 @@ module case_folded(case_design, case_style) {
|
|||||||
section_position = 2;
|
section_position = 2;
|
||||||
ba = bend_allowance;
|
ba = bend_allowance;
|
||||||
slit_len = pcb_depth < pcb_width ? pcb_depth/10 : pcb_width/10;
|
slit_len = pcb_depth < pcb_width ? pcb_depth/10 : pcb_width/10;
|
||||||
slit_width = .25;
|
slit_width = material_thickness;
|
||||||
slit_offset = pcb_depth < pcb_width ? pcb_depth/10 : pcb_width/10;
|
slit_offset = pcb_depth < pcb_width ? pcb_depth/10 : pcb_width/10;
|
||||||
fold_height = pcb_tmaxz+bottom_clearence+pcb_z+ba;
|
fold_height = pcb_tmaxz+bottom_clearence+pcb_z+ba;
|
||||||
flap_y = 12;
|
flap_y = 12;
|
||||||
@@ -38,164 +40,160 @@ tab_y = fold_height/2;
|
|||||||
tab_inset = 6;
|
tab_inset = 6;
|
||||||
|
|
||||||
if(case_style == "split-top") {
|
if(case_style == "split-top") {
|
||||||
projection(cut = true) {
|
// rear
|
||||||
// rear
|
difference() {
|
||||||
difference() {
|
union() {
|
||||||
union() {
|
folded_base(fold_height, ba, flap_y, tab_x, tab_y, tab_inset, slit_len, slit_width, slit_offset);
|
||||||
folded_base(fold_height, ba, flap_y, tab_x, tab_y, tab_inset, slit_len, slit_width, slit_offset);
|
translate([0, -fold_height-(pcb_depth/2)-ba, 0])
|
||||||
translate([0, -fold_height-(pcb_depth/2)-ba, 0])
|
cube([pcb_width, (pcb_depth/2)+ba, material_thickness]);
|
||||||
cube([pcb_width, (pcb_depth/2)+ba, material_thickness]);
|
translate([0, pcb_depth+fold_height, 0])
|
||||||
translate([0, pcb_depth+fold_height, 0])
|
cube([pcb_width, (pcb_depth/2)+ba, material_thickness]);
|
||||||
cube([pcb_width, (pcb_depth/2)+ba, material_thickness]);
|
|
||||||
|
|
||||||
// flaps rear left
|
// flaps rear left
|
||||||
translate([-tab_y, -fold_height+tab_inset-(pcb_depth/2), 0])
|
translate([-tab_y, -fold_height+tab_inset-(pcb_depth/2), 0])
|
||||||
slab_r([tab_y, tab_x, material_thickness], [tab_x/2,tab_x/2,.1,.1]);
|
slab_r([tab_y, tab_x, material_thickness], [tab_x/2,tab_x/2,.1,.1]);
|
||||||
|
|
||||||
// flaps rear right
|
// flaps rear right
|
||||||
translate([pcb_width, -fold_height-(pcb_depth/2)+tab_inset, 0])
|
translate([pcb_width, -fold_height-(pcb_depth/2)+tab_inset, 0])
|
||||||
slab_r([tab_y, tab_x, material_thickness], [.1,.1,tab_x/2,tab_x/2]);
|
slab_r([tab_y, tab_x, material_thickness], [.1,.1,tab_x/2,tab_x/2]);
|
||||||
|
|
||||||
// flaps front left
|
// flaps front left
|
||||||
translate([-tab_y, pcb_depth+fold_height-tab_inset+tab_x, 0])
|
translate([-tab_y, pcb_depth+fold_height-tab_inset+tab_x, 0])
|
||||||
slab_r([tab_y, tab_x, material_thickness], [tab_x/2,tab_x/2,.1,.1]);
|
slab_r([tab_y, tab_x, material_thickness], [tab_x/2,tab_x/2,.1,.1]);
|
||||||
|
|
||||||
// flaps front right
|
// flaps front right
|
||||||
translate([pcb_width, pcb_depth+fold_height-tab_inset+tab_x, 0])
|
translate([pcb_width, pcb_depth+fold_height-tab_inset+tab_x, 0])
|
||||||
slab_r([tab_y, tab_x, material_thickness], [.1,.1,tab_x/2,tab_x/2]);
|
slab_r([tab_y, tab_x, material_thickness], [.1,.1,tab_x/2,tab_x/2]);
|
||||||
|
|
||||||
// flaps left rear
|
// flaps left rear
|
||||||
difference() {
|
difference() {
|
||||||
translate([-(fold_height), 0, 0])
|
translate([-(fold_height), 0, 0])
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
|
||||||
[1, (-pcb_depth/4)],
|
|
||||||
[(fold_height)-2, (-pcb_depth/4)],
|
|
||||||
[(fold_height), 0],
|
|
||||||
[0, 0]]);
|
|
||||||
translate([-bottom_clearence, 0, section_position]) rotate([90, 0, 270])
|
|
||||||
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
|
||||||
}
|
|
||||||
// flaps left front
|
|
||||||
difference() {
|
|
||||||
translate([-(fold_height), pcb_depth, 0])
|
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
|
||||||
[1, (pcb_depth/4)],
|
|
||||||
[(fold_height)-2, (pcb_depth/4)],
|
|
||||||
[(fold_height), 0],
|
|
||||||
[0, 0]]);
|
|
||||||
translate([-bottom_clearence, pcb_depth, pcb_depth+section_position]) rotate([-90, 0, 90])
|
|
||||||
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
|
||||||
}
|
|
||||||
// flaps right rear
|
|
||||||
difference() {
|
|
||||||
translate([pcb_width, 0, 0])
|
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
|
||||||
[2, (-pcb_depth/4)],
|
|
||||||
[(fold_height)-1, (-pcb_depth/4)],
|
|
||||||
[(fold_height), 0],
|
|
||||||
[0, 0]]);
|
|
||||||
translate([bottom_clearence+pcb_width, -pcb_width, section_position]) rotate([90, 0, 90])
|
|
||||||
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
|
||||||
}
|
|
||||||
|
|
||||||
// flaps right front
|
|
||||||
difference() {
|
|
||||||
translate([pcb_width, pcb_depth, 0])
|
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
[2, (pcb_depth/4)],
|
[1, (-pcb_depth/4)],
|
||||||
[(fold_height)-1, (pcb_depth/4)],
|
[(fold_height)-2, (-pcb_depth/4)],
|
||||||
[(fold_height), 0],
|
[(fold_height), 0],
|
||||||
[0, 0]]);
|
[0, 0]]);
|
||||||
translate([bottom_clearence+pcb_width, pcb_width+pcb_depth, section_position+pcb_depth])
|
translate([-bottom_clearence, 0, section_position]) rotate([90, 0, 270])
|
||||||
rotate([270, 0, 270]) sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
}
|
}
|
||||||
|
// flaps left front
|
||||||
|
difference() {
|
||||||
|
translate([-(fold_height), pcb_depth, 0])
|
||||||
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
|
[1, (pcb_depth/4)],
|
||||||
|
[(fold_height)-2, (pcb_depth/4)],
|
||||||
|
[(fold_height), 0],
|
||||||
|
[0, 0]]);
|
||||||
|
translate([-bottom_clearence, pcb_depth, pcb_depth+section_position]) rotate([-90, 0, 90])
|
||||||
|
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
|
}
|
||||||
|
// flaps right rear
|
||||||
|
difference() {
|
||||||
|
translate([pcb_width, 0, 0])
|
||||||
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
|
[2, (-pcb_depth/4)],
|
||||||
|
[(fold_height)-1, (-pcb_depth/4)],
|
||||||
|
[(fold_height), 0],
|
||||||
|
[0, 0]]);
|
||||||
|
translate([bottom_clearence+pcb_width, -pcb_width, section_position]) rotate([90, 0, 90])
|
||||||
|
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
}
|
}
|
||||||
|
|
||||||
translate([0, -fold_height, pcb_tmaxz+2]) rotate([180, 0, 0])
|
// flaps right front
|
||||||
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
difference() {
|
||||||
translate([0, 2*pcb_depth+fold_height, pcb_tmaxz+2]) rotate([180, 0, 0])
|
translate([pcb_width, pcb_depth, 0])
|
||||||
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
|
[2, (pcb_depth/4)],
|
||||||
|
[(fold_height)-1, (pcb_depth/4)],
|
||||||
|
[(fold_height), 0],
|
||||||
|
[0, 0]]);
|
||||||
|
translate([bottom_clearence+pcb_width, pcb_width+pcb_depth, section_position+pcb_depth])
|
||||||
|
rotate([270, 0, 270]) sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
translate([0, -fold_height, pcb_tmaxz+2+material_thickness]) rotate([180, 0, 0])
|
||||||
|
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
||||||
|
translate([0, 2*pcb_depth+fold_height, pcb_tmaxz+2+material_thickness]) rotate([180, 0, 0])
|
||||||
|
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
||||||
}
|
}
|
||||||
|
translate([0, -fold_height-(pcb_depth/2)-ba, 0]) cube([pcb_width, 2, material_thickness]);
|
||||||
|
translate([0, pcb_depth+fold_height+(pcb_depth/2)-ba, 0]) cube([pcb_width, 2, material_thickness]);
|
||||||
}
|
}
|
||||||
|
|
||||||
if(case_style == "full-top") {
|
if(case_style == "full-top" || case_style == "none") {
|
||||||
projection(cut = true) {
|
// rear
|
||||||
// rear
|
difference() {
|
||||||
difference() {
|
union() {
|
||||||
union() {
|
folded_base(fold_height, ba, flap_y, tab_x, tab_y, tab_inset, slit_len, slit_width, slit_offset);
|
||||||
folded_base(fold_height, ba, flap_y, tab_x, tab_y, tab_inset, slit_len, slit_width, slit_offset);
|
translate([0, -fold_height-pcb_depth-ba, 0])
|
||||||
translate([0, -fold_height-pcb_depth-ba, 0])
|
cube([pcb_width, pcb_depth+ba, material_thickness]);
|
||||||
cube([pcb_width, pcb_depth+ba, material_thickness]);
|
translate([0, pcb_depth+fold_height, 0])
|
||||||
translate([0, pcb_depth+fold_height, 0])
|
cube([pcb_width, (pcb_depth/4)+ba, material_thickness]);
|
||||||
cube([pcb_width, (pcb_depth/4)+ba, material_thickness]);
|
|
||||||
|
|
||||||
// flaps rear left
|
// flaps rear left
|
||||||
translate([tab_inset, -fold_height-pcb_depth-tab_y, 0])
|
translate([tab_inset, -fold_height-pcb_depth-tab_y, 0])
|
||||||
slab_r([tab_x, tab_y, material_thickness], [tab_x/2,.1,.1,tab_x/2]);
|
slab_r([tab_x, tab_y, material_thickness], [tab_x/2,.1,.1,tab_x/2]);
|
||||||
|
|
||||||
// flaps rear right
|
// flaps rear right
|
||||||
translate([pcb_width-tab_x-tab_inset, -fold_height-pcb_depth-tab_y, 0])
|
translate([pcb_width-tab_x-tab_inset, -fold_height-pcb_depth-tab_y, 0])
|
||||||
slab_r([tab_x, tab_y, material_thickness], [tab_x/2,.1,.1,tab_x/2]);
|
slab_r([tab_x, tab_y, material_thickness], [tab_x/2,.1,.1,tab_x/2]);
|
||||||
|
|
||||||
// flaps left rear
|
// flaps left rear
|
||||||
difference() {
|
difference() {
|
||||||
translate([-(fold_height), 0, 0])
|
translate([-(fold_height), 0, 0])
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
|
||||||
[1, (-pcb_depth/4)],
|
|
||||||
[(fold_height)-2, (-pcb_depth/4)],
|
|
||||||
[(fold_height), 0],
|
|
||||||
[0, 0]]);
|
|
||||||
translate([-bottom_clearence, 0, section_position]) rotate([90, 0, 270])
|
|
||||||
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
|
||||||
}
|
|
||||||
// flaps left front
|
|
||||||
difference() {
|
|
||||||
translate([-(fold_height), pcb_depth, 0])
|
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
|
||||||
[1, (pcb_depth/4)],
|
|
||||||
[(fold_height)-2, (pcb_depth/4)],
|
|
||||||
[(fold_height), 0],
|
|
||||||
[0, 0]]);
|
|
||||||
translate([-bottom_clearence, pcb_depth, pcb_depth+section_position]) rotate([-90, 0, 90])
|
|
||||||
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
|
||||||
}
|
|
||||||
// flaps right rear
|
|
||||||
difference() {
|
|
||||||
translate([pcb_width, 0, 0])
|
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
|
||||||
[2, (-pcb_depth/4)],
|
|
||||||
[(fold_height)-1, (-pcb_depth/4)],
|
|
||||||
[(fold_height), 0],
|
|
||||||
[0, 0]]);
|
|
||||||
translate([bottom_clearence+pcb_width, -pcb_width, section_position]) rotate([90, 0, 90])
|
|
||||||
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
|
||||||
}
|
|
||||||
|
|
||||||
// flaps right front
|
|
||||||
difference() {
|
|
||||||
translate([pcb_width, pcb_depth, 0])
|
|
||||||
linear_extrude(material_thickness) polygon([[0, 0],
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
[2, (pcb_depth/4)],
|
[1, (-pcb_depth/4)],
|
||||||
[(fold_height)-1, (pcb_depth/4)],
|
[(fold_height)-2, (-pcb_depth/4)],
|
||||||
[(fold_height), 0],
|
[(fold_height), 0],
|
||||||
[0, 0]]);
|
[0, 0]]);
|
||||||
translate([bottom_clearence+pcb_width, pcb_width+pcb_depth, section_position+pcb_depth])
|
translate([-bottom_clearence, 0, section_position]) rotate([90, 0, 270])
|
||||||
rotate([270, 0, 270]) sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
}
|
}
|
||||||
|
// flaps left front
|
||||||
|
difference() {
|
||||||
|
translate([-(fold_height), pcb_depth, 0])
|
||||||
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
|
[1, (pcb_depth/4)],
|
||||||
|
[(fold_height)-2, (pcb_depth/4)],
|
||||||
|
[(fold_height), 0],
|
||||||
|
[0, 0]]);
|
||||||
|
translate([-bottom_clearence, pcb_depth, pcb_depth+section_position]) rotate([-90, 0, 90])
|
||||||
|
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
|
}
|
||||||
|
// flaps right rear
|
||||||
|
difference() {
|
||||||
|
translate([pcb_width, 0, 0])
|
||||||
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
|
[2, (-pcb_depth/4)],
|
||||||
|
[(fold_height)-1, (-pcb_depth/4)],
|
||||||
|
[(fold_height), 0],
|
||||||
|
[0, 0]]);
|
||||||
|
translate([bottom_clearence+pcb_width, -pcb_width, section_position]) rotate([90, 0, 90])
|
||||||
|
sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
}
|
}
|
||||||
// top closure tab slits
|
|
||||||
translate([tab_inset, pcb_depth+fold_height, 0]) cube([tab_x, slit_width, material_thickness+(2*adj)]);
|
|
||||||
translate([pcb_width-tab_x-tab_inset, pcb_depth+fold_height, 0])
|
|
||||||
cube([tab_x, slit_width, material_thickness+2*adj]);
|
|
||||||
|
|
||||||
translate([0, -fold_height, pcb_tmaxz+2]) rotate([180, 0, 0])
|
// flaps right front
|
||||||
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
difference() {
|
||||||
translate([0, 2*pcb_depth+fold_height, pcb_tmaxz+2]) rotate([180, 0, 0])
|
translate([pcb_width, pcb_depth, 0])
|
||||||
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
linear_extrude(material_thickness) polygon([[0, 0],
|
||||||
|
[2, (pcb_depth/4)],
|
||||||
|
[(fold_height)-1, (pcb_depth/4)],
|
||||||
|
[(fold_height), 0],
|
||||||
|
[0, 0]]);
|
||||||
|
translate([bottom_clearence+pcb_width, pcb_width+pcb_depth, section_position+pcb_depth])
|
||||||
|
rotate([270, 0, 270]) sbc(sbc_model, "disable", 0, gpio_opening, uart_opening, true);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
// top closure tab slits
|
||||||
|
translate([tab_inset, pcb_depth+fold_height, 0]) cube([tab_x, slit_width, material_thickness+(2*adj)]);
|
||||||
|
translate([pcb_width-tab_x-tab_inset, pcb_depth+fold_height, 0])
|
||||||
|
cube([tab_x, slit_width, material_thickness+2*adj]);
|
||||||
|
|
||||||
|
translate([0, -fold_height, pcb_tmaxz+2+material_thickness]) rotate([180, 0, 0])
|
||||||
|
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
||||||
|
translate([0, 2*pcb_depth+fold_height, pcb_tmaxz+2+material_thickness]) rotate([180, 0, 0])
|
||||||
|
sbc(sbc_model, cooling, 0, "disable", "disable", true);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@@ -242,11 +240,11 @@ section_position = 2;
|
|||||||
difference() {
|
difference() {
|
||||||
translate([0, pcb_depth, 0]) cube([pcb_width, fold_height, material_thickness]);
|
translate([0, pcb_depth, 0]) cube([pcb_width, fold_height, material_thickness]);
|
||||||
// folding slits
|
// folding slits
|
||||||
translate([slit_offset, pcb_depth+fold_height, -adj])
|
translate([slit_offset, pcb_depth+fold_height-slit_width, -adj])
|
||||||
cube([slit_len, slit_width, material_thickness+(2*adj)]);
|
cube([slit_len, slit_width, material_thickness+(2*adj)]);
|
||||||
translate([pcb_width/2-slit_len/2, pcb_depth+fold_height, -adj])
|
translate([pcb_width/2-slit_len/2, pcb_depth+fold_height-slit_width, -adj])
|
||||||
cube([slit_len, slit_width, material_thickness+(2*adj)]);
|
cube([slit_len, slit_width, material_thickness+(2*adj)]);
|
||||||
translate([pcb_width-slit_offset-slit_len, pcb_depth+fold_height, -adj])
|
translate([pcb_width-slit_offset-slit_len, pcb_depth+fold_height-slit_width, -adj])
|
||||||
cube([slit_len, slit_width, material_thickness+(2*adj)]);
|
cube([slit_len, slit_width, material_thickness+(2*adj)]);
|
||||||
|
|
||||||
translate([0, pcb_depth+bottom_clearence, pcb_depth+section_position]) rotate([-90, 0, 0])
|
translate([0, pcb_depth+bottom_clearence, pcb_depth+section_position]) rotate([-90, 0, 0])
|
||||||
|
|||||||
@@ -125,7 +125,7 @@ bottom_ext_standoff = [5.75,5,3.6,10,4,1,0,0,0,4.5,5.1];
|
|||||||
|
|
||||||
/* [Folding Case Adjustments] */
|
/* [Folding Case Adjustments] */
|
||||||
//Material Thickness
|
//Material Thickness
|
||||||
material_thickness = .5; //[.1:.1:3]
|
material_thickness = .5; //[.1:.01:3]
|
||||||
// Bend Allowance
|
// Bend Allowance
|
||||||
bend_allowance = 1; //[0:.01:5]
|
bend_allowance = 1; //[0:.01:5]
|
||||||
// Bottom clearence
|
// Bottom clearence
|
||||||
@@ -257,6 +257,9 @@ if (view == "platter") {
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
if(case_design == "paper") {
|
||||||
|
case_folded(case_design, case_style);
|
||||||
|
}
|
||||||
if(case_design == "tray") {
|
if(case_design == "tray") {
|
||||||
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
||||||
}
|
}
|
||||||
@@ -535,6 +538,9 @@ if (view == "model") {
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
if(case_design == "paper") {
|
||||||
|
case_folded(case_design, case_style);
|
||||||
|
}
|
||||||
if(case_design == "tray") {
|
if(case_design == "tray") {
|
||||||
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
||||||
}
|
}
|
||||||
@@ -652,6 +658,6 @@ if (view == "part") {
|
|||||||
}
|
}
|
||||||
if (view == "folded") {
|
if (view == "folded") {
|
||||||
if(case_design == "paper") {
|
if(case_design == "paper") {
|
||||||
case_folded(case_design, case_style);
|
projection() case_folded(case_design, case_style);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|||||||
Reference in New Issue
Block a user