initial h3 port extender work

sbc_case_builder.json

@@ -9352,6 +9352,63 @@
             "vu_rotation": "[15, 0, 0]",
             "wallthick": "2"
         },
+        "h3_ultimate": {
+            "$fn": "90",
+            "accessory_highlight": "false",
+            "accessory_name": "h3_ultimate",
+            "adjust": "0.01",
+            "bottom_ext_standoff": "[5.75, 5, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
+            "bottom_front_left": "0",
+            "bottom_front_right": "0",
+            "bottom_rear_left": "0",
+            "bottom_rear_right": "0",
+            "bottom_standoff": "[5.75, 7, 3.6, 10, 4, 1, 0, 0, 0, 4.5, 5.1]",
+            "c_fillet": "3.5",
+            "case_design": "shell",
+            "case_ext_standoffs": "false",
+            "case_ffn": "90",
+            "case_fn": "360",
+            "case_offset_bz": "3",
+            "case_offset_tz": "26",
+            "case_offset_x": "25",
+            "case_offset_y": "10",
+            "case_style": "none",
+            "cooling": "none",
+            "exhaust_vents": "none",
+            "fillet": "0",
+            "floorthick": "2",
+            "gap": "1.5",
+            "gpio_opening": "none",
+            "indents": "true",
+            "lip": "5",
+            "lower_bottom": "0",
+            "move_front": "0",
+            "move_leftside": "0",
+            "move_rear": "0",
+            "move_rightside": "0",
+            "pcb_loc_x": "0",
+            "pcb_loc_y": "0",
+            "pcb_loc_z": "0",
+            "raise_top": "0",
+            "sata_punchout": "false",
+            "sbc_bottom_standoffs": "true",
+            "sbc_highlight": "false",
+            "sbc_model": "h3",
+            "sbc_off": "false",
+            "sbc_top_standoffs": "true",
+            "sidethick": "0",
+            "sidewall_support": "true",
+            "tol": "0.25",
+            "top_ext_standoff": "[5.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
+            "top_front_left": "0",
+            "top_front_right": "0",
+            "top_rear_left": "0",
+            "top_rear_right": "0",
+            "top_standoff": "[5.75, 18, 2.5, 10, 4, 4, 0, 1, 0, 4.5, 5.1]",
+            "view": "model",
+            "vu_rotation": "[15, 0, 0]",
+            "wallthick": "2"
+        },
         "h3_shell_drivebox2.5v": {
             "$fn": "90",
             "accessory_highlight": "false",

sbc_case_builder.scad

@@ -165,7 +165,7 @@ cooling = "fan"; // [none,vents,fan,custom]
 exhaust_vents = "vent"; // [none,vent]
 // case accessory group to load
 
-accessory_name = "none"; // ["none", "c1+_shell_boombox", "c1+_panel_boombox", "c1+_panel_lcd3.5", "c1+_desktop_lcd3.5", "c1+_deskboom_lcd3.5", "c1+_tray_boombox", "c1+_round", "c1+_hex", "c2_shell_boombox", "c2_panel_boombox", "c2_panel_lcd3.5", "c2_desktop_lcd3.5", "c2_deskboom_lcd3.5", "c2_tray_boombox", "c2_round", "c2_hex", "c4_shell_boombox", "c4_panel_lcd3.5", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_tray_boombox", "c4_round", "c4_hex", "hc4_tray_drivebox2.5", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "n1_round", "n1_hex", "n2l_tray", "n2+_tray_vu7_fan", "m1_panel", "m1_tray", "m1_tray_ssd", "m1_tray_sides", "m1_tray_vu5", "m1_tray_vu7", "m1_fitted_drivebox2.5", "m1_fitted_drivebox3.5", "m1_fitted_pizzabox", "m1_fitted_drivebox3.5v", "h2_shell", "h2_shell_router", "h2_shell_router-ssd", "h2_lowboy", "h2_lowboy_router", "h2_tray", "h2_tray_sides", "h2_tray_router", "h2_router_station", "h2_round", "h2_hex", "h3_shell", "h3_lowboy", "h3_lowboy_router", "h3_tallboy", "h3_tallboy-ssd", "h3_shell_drivebox2.5v", "jetsonnano_shell", "jetsonnano_panel", "jetsonnano_stacked", "jetsonnano_tray", "jetsonnano_tray_sides", "jetsonnano_round", "jetsonnano_hex", "jetsonnano_snap", "jetsonnano_fitted", "rock64_shell", "rock64_panel", "rock64_stacked", "rock64_tray", "rock64_tray_sides", "rock64_round", "rock64_hex", "rock64_snap", "rock64_fitted", "rockpro64_shell", "rockpro64_panel", "rockpro64_stacked", "rockpro64_tray", "rockpro64_tray_sides", "rockpro64_round", "rockpro64_hex", "rockpro64_snap", "rockpro64_fitted", "quartz64b_stacked_poe_hat", "show2_shell", "rpi1a+_shell", "rpi1a+_panel", "rpi1a+_stacked", "rpi1a+_tray", "rpi1a+_tray_sides", "rpi1a+_round", "rpi1a+_hex", "rpi1a+_snap", "rpi1a+_fitted", "rpi1b+_shell", "rpi1b+_panel", "rpi1b+_stacked", "rpi1b+_tray", "rpi1b+_tray_sides", "rpi1b+_round", "rpi1b+_hex", "rpi1b+_snap", "rpi1b+_fitted", "rpi3a+_shell", "rpi3a+_panel", "rpi3a+_stacked", "rpi3a+_tray", "rpi3a+_tray_sides", "rpi3a+_round", "rpi3a+_hex", "rpi3a+_snap", "rpi3a+_fitted", "rpi3b_shell", "rpi3b_panel", "rpi3b_stacked", "rpi3b_tray", "rpi3b_tray_sides", "rpi3b_round", "rpi3b_hex", "rpi3b_snap", "rpi3b_fitted", "rpi3b+_shell", "rpi3b+_panel", "rpi3b+_stacked", "rpi3b+_tray", "rpi3b+_tray_sides", "rpi3b+_round", "rpi3b+_hex", "rpi3b+_snap", "rpi3b+_fitted", "rpi4b_shell", "rpi4b_shell_geeekpi_poe_hat", "rpi4b_panel", "rpi4b_stacked", "rpi4b_tray", "rpi4b_tray_sides", "rpi4b_round", "rpi4b_hex", "rpi4b_snap", "rpi4b_fitted", "rockpi4b+_shell", "rockpi4b+_panel", "rockpi4b+_stacked", "rockpi4b+_tray", "rockpi4b+_tray_sides", "rockpi4b+_round", "rockpi4b+_hex", "rockpi4b+_snap", "rockpi4b+_fitted", "rockpi4c_shell", "rockpi4c_panel", "rockpi4c_stacked", "rockpi4c_tray", "rockpi4c_tray_sides", "rockpi4c_round", "rockpi4c_hex", "rockpi4c_snap", "rockpi4c_fitted", "rockpi4c+_shell", "rockpi4c+_panel", "rockpi4c+_stacked", "rockpi4c+_tray", "rockpi4c+_tray_sides", "rockpi4c+_round", "rockpi4c+_hex", "rockpi4c+_snap", "rockpi4c+_fitted", "rockpi5b", "vim1_shell", "vim1_panel", "vim1_stacked", "vim1_tray", "vim1_tray_sides", "vim1_round", "vim1_hex", "vim1_snap", "vim1_fitted", "vim2_shell", "vim2_panel", "vim2_stacked", "vim2_tray", "vim2_tray_sides", "vim2_round", "vim2_hex", "vim2_snap", "vim2_fitted", "vim3l_shell", "vim3l_panel", "vim3l_stacked", "vim3l_tray", "vim3l_tray_sides", "vim3l_round", "vim3l_hex", "vim3l_snap", "vim3l_fitted", "vim3_shell", "vim3_panel", "vim3_stacked", "vim3_tray", "vim3_tray_sides", "vim3_round", "vim3_hex", "vim3_snap", "vim3_fitted", "vim4_shell", "vim4_panel", "vim4_stacked", "vim4_tray", "vim4_tray_sides", "vim4_round", "vim4_hex", "vim4_snap", "vim4_fitted", "tinkerboard_shell", "tinkerboard_panel", "tinkerboard_stacked", "tinkerboard_tray", "tinkerboard_tray_sides", "tinkerboard_round", "tinkerboard_hex", "tinkerboard_snap", "tinkerboard_fitted", "tinkerboard-s_shell", "tinkerboard-s_panel", "tinkerboard-s_stacked", "tinkerboard-s_tray", "tinkerboard-s_tray_sides", "tinkerboard-s_round", "tinkerboard-s_hex", "tinkerboard-s_snap", "tinkerboard-s_fitted", "tinkerboard-2_shell", "tinkerboard-2_panel", "tinkerboard-2_stacked", "tinkerboard-2_tray", "tinkerboard-2_tray_sides", "tinkerboard-2_round", "tinkerboard-2_hex", "tinkerboard-2_snap", "tinkerboard-2_fitted", "tinkerboard-r2_shell", "tinkerboard-r2_panel", "tinkerboard-r2_stacked", "tinkerboard-r2_tray", "tinkerboard-r2_tray_sides", "tinkerboard-r2_round", "tinkerboard-r2_hex", "tinkerboard-r2_snap", "tinkerboard-r2_fitted", "hk_uart"]
+accessory_name = "none"; // ["none", "c1+_shell_boombox", "c1+_panel_boombox", "c1+_panel_lcd3.5", "c1+_desktop_lcd3.5", "c1+_deskboom_lcd3.5", "c1+_tray_boombox", "c1+_round", "c1+_hex", "c2_shell_boombox", "c2_panel_boombox", "c2_panel_lcd3.5", "c2_desktop_lcd3.5", "c2_deskboom_lcd3.5", "c2_tray_boombox", "c2_round", "c2_hex", "c4_shell_boombox", "c4_panel_lcd3.5", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_tray_boombox", "c4_round", "c4_hex", "hc4_tray_drivebox2.5", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "n1_round", "n1_hex", "n2l_tray", "n2+_tray_vu7_fan", "m1_panel", "m1_tray", "m1_tray_ssd", "m1_tray_sides", "m1_tray_vu5", "m1_tray_vu7", "m1_fitted_drivebox2.5", "m1_fitted_drivebox3.5", "m1_fitted_pizzabox", "m1_fitted_drivebox3.5v", "h2_shell", "h2_shell_router", "h2_shell_router-ssd", "h2_lowboy", "h2_lowboy_router", "h2_tray", "h2_tray_sides", "h2_tray_router", "h2_router_station", "h2_round", "h2_hex", "h3_shell", "h3_lowboy", "h3_lowboy_router", "h3_tallboy", "h3_tallboy-ssd", "h3_ultimate", "h3_shell_drivebox2.5v", "jetsonnano_shell", "jetsonnano_panel", "jetsonnano_stacked", "jetsonnano_tray", "jetsonnano_tray_sides", "jetsonnano_round", "jetsonnano_hex", "jetsonnano_snap", "jetsonnano_fitted", "rock64_shell", "rock64_panel", "rock64_stacked", "rock64_tray", "rock64_tray_sides", "rock64_round", "rock64_hex", "rock64_snap", "rock64_fitted", "rockpro64_shell", "rockpro64_panel", "rockpro64_stacked", "rockpro64_tray", "rockpro64_tray_sides", "rockpro64_round", "rockpro64_hex", "rockpro64_snap", "rockpro64_fitted", "quartz64b_stacked_poe_hat", "show2_shell", "rpi1a+_shell", "rpi1a+_panel", "rpi1a+_stacked", "rpi1a+_tray", "rpi1a+_tray_sides", "rpi1a+_round", "rpi1a+_hex", "rpi1a+_snap", "rpi1a+_fitted", "rpi1b+_shell", "rpi1b+_panel", "rpi1b+_stacked", "rpi1b+_tray", "rpi1b+_tray_sides", "rpi1b+_round", "rpi1b+_hex", "rpi1b+_snap", "rpi1b+_fitted", "rpi3a+_shell", "rpi3a+_panel", "rpi3a+_stacked", "rpi3a+_tray", "rpi3a+_tray_sides", "rpi3a+_round", "rpi3a+_hex", "rpi3a+_snap", "rpi3a+_fitted", "rpi3b_shell", "rpi3b_panel", "rpi3b_stacked", "rpi3b_tray", "rpi3b_tray_sides", "rpi3b_round", "rpi3b_hex", "rpi3b_snap", "rpi3b_fitted", "rpi3b+_shell", "rpi3b+_panel", "rpi3b+_stacked", "rpi3b+_tray", "rpi3b+_tray_sides", "rpi3b+_round", "rpi3b+_hex", "rpi3b+_snap", "rpi3b+_fitted", "rpi4b_shell", "rpi4b_shell_geeekpi_poe_hat", "rpi4b_panel", "rpi4b_stacked", "rpi4b_tray", "rpi4b_tray_sides", "rpi4b_round", "rpi4b_hex", "rpi4b_snap", "rpi4b_fitted", "rockpi4b+_shell", "rockpi4b+_panel", "rockpi4b+_stacked", "rockpi4b+_tray", "rockpi4b+_tray_sides", "rockpi4b+_round", "rockpi4b+_hex", "rockpi4b+_snap", "rockpi4b+_fitted", "rockpi4c_shell", "rockpi4c_panel", "rockpi4c_stacked", "rockpi4c_tray", "rockpi4c_tray_sides", "rockpi4c_round", "rockpi4c_hex", "rockpi4c_snap", "rockpi4c_fitted", "rockpi4c+_shell", "rockpi4c+_panel", "rockpi4c+_stacked", "rockpi4c+_tray", "rockpi4c+_tray_sides", "rockpi4c+_round", "rockpi4c+_hex", "rockpi4c+_snap", "rockpi4c+_fitted", "rockpi5b", "vim1_shell", "vim1_panel", "vim1_stacked", "vim1_tray", "vim1_tray_sides", "vim1_round", "vim1_hex", "vim1_snap", "vim1_fitted", "vim2_shell", "vim2_panel", "vim2_stacked", "vim2_tray", "vim2_tray_sides", "vim2_round", "vim2_hex", "vim2_snap", "vim2_fitted", "vim3l_shell", "vim3l_panel", "vim3l_stacked", "vim3l_tray", "vim3l_tray_sides", "vim3l_round", "vim3l_hex", "vim3l_snap", "vim3l_fitted", "vim3_shell", "vim3_panel", "vim3_stacked", "vim3_tray", "vim3_tray_sides", "vim3_round", "vim3_hex", "vim3_snap", "vim3_fitted", "vim4_shell", "vim4_panel", "vim4_stacked", "vim4_tray", "vim4_tray_sides", "vim4_round", "vim4_hex", "vim4_snap", "vim4_fitted", "tinkerboard_shell", "tinkerboard_panel", "tinkerboard_stacked", "tinkerboard_tray", "tinkerboard_tray_sides", "tinkerboard_round", "tinkerboard_hex", "tinkerboard_snap", "tinkerboard_fitted", "tinkerboard-s_shell", "tinkerboard-s_panel", "tinkerboard-s_stacked", "tinkerboard-s_tray", "tinkerboard-s_tray_sides", "tinkerboard-s_round", "tinkerboard-s_hex", "tinkerboard-s_snap", "tinkerboard-s_fitted", "tinkerboard-2_shell", "tinkerboard-2_panel", "tinkerboard-2_stacked", "tinkerboard-2_tray", "tinkerboard-2_tray_sides", "tinkerboard-2_round", "tinkerboard-2_hex", "tinkerboard-2_snap", "tinkerboard-2_fitted", "tinkerboard-r2_shell", "tinkerboard-r2_panel", "tinkerboard-r2_stacked", "tinkerboard-r2_tray", "tinkerboard-r2_tray_sides", "tinkerboard-r2_round", "tinkerboard-r2_hex", "tinkerboard-r2_snap", "tinkerboard-r2_fitted", "hk_uart"]
 
 a = search([accessory_name],accessory_data);
 s = search([sbc_model],sbc_data);
@@ -1159,7 +1159,6 @@ module case_bottom(case_design) {
                             cube([gap+adjust+2,2,bottom_ext_standoff[1]]);
                 }
             }
-
         }
         // subtractive accessories
         if(accessory_name != "none") {

sbc_case_builder_accessories.cfg

@@ -858,6 +858,34 @@ accessory_data = [
              "sub","hd_vertleft_holes",98,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                  // sub hd bottom holes
              "model","hd25",98,110,2,"bottom",[90,0,-90],["case",true,true,false],0,0,0,7,0,"",0],                                      // model 2.5 hd
 
+             ["h3_ultimate",
+             "sub","vent",-3.5,30,58,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",111.5,30,58,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",-3.5,30,19,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",111.5,30,28,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
+             "sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
+             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                         // fan opening
+             "sub","rectangle",-5,76,33.5,"top",[0,0,0],["sbc",true,true,true],6,8,15,0,0,"vertical",[.25,.25,.25,.25],                   // usb opening
+             "sub","rectangle",-5,85.5,33.5,"top",[0,0,0],["sbc",true,true,true],6,8,15,0,0,"vertical",[.25,.25,.25,.25],                   // usb opening
+             "sub","rectangle",-5,95,33.5,"top",[0,0,0],["sbc",true,true,true],6,8,15,0,0,"vertical",[.25,.25,.25,.25],                   // usb opening
+             "sub","round",-5,87,51.5,"top",[0,90,0],["sbc",true,true,true],3,0,6,0,0,"",0,                                      // port extender hole
+             "add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                      // access port
+             "add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
+             "add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
+             "model","button_top",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,58,0,0,"recess",0,                   // button top
+             "model","button_top",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,58,0,0,"recess",0,                   // button top
+             "model","h3_port_extender",1,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],0,0,0,0,0,"landscape",0,                      // access port cover
+             "model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                    // access port cover
+             "platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
+             "platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0,                 // access port cover
+             "sub","round",111,34,6.07,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0,                                      // sub hd side screw hole
+             "sub","round",111,110.6,6.07,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0,                                   // sub hd side screw hole
+             "add2","hd_vertleft",98,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                        // add hd holder
+             "sub","hd_vertleft_holes",98,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                   // sub hd bottom holes
+             "model","hd25",98,110,2,"bottom",[90,0,-90],["case",true,true,false],0,0,0,7,0,"",0],                                      // model 2.5 hd
+
              ["h3_shell_drivebox2.5v",
              "sub","vent",-3.5,30,58,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
              "sub","vent",111.5,30,58,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening

sbc_case_builder_library.scad

@@ -117,6 +117,7 @@
     fan_mask(size, thick, style)
     mask(loc_x,loc_y,rotation,side,class,type,case_z,wallthick,gap,floorthick,pcb_z)
     punchout(width,depth,gap,thick,fillet,shape)
+    h3_port_extender()
     
 */
 
@@ -269,6 +270,9 @@ module add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data
     if(type == "boom_vring") {
         translate([loc_x,loc_y,loc_z])  rotate(rotation) boom_vring(data_1);
     }
+    if(type == "h3_port_extender") {
+        translate([loc_x,loc_y,loc_z]) rotate(rotation) h3_port_extender(); 
+    }
 }
 
 
@@ -3442,3 +3446,8 @@ module vent(width,length,height,gap,rows,columns,orientation) {
     }
 }
 
+// odroid-h3 gpio port extender
+module h3_port_extender() {
+
+    translate([7,258.5,103]) rotate([90,0,270]) import("stl/h3_port_extender.stl");
+}