initial standoff support for multiple secondary pcb assemblies
This commit is contained in:
Edward Kisiel
@@ -65,7 +65,7 @@ bottom_clearence = 3.5; //[-10:.01:10]
|
||||
// enable flat blank section for export
|
||||
flat_blank_section = false;
|
||||
|
||||
/* [Standard Motherboard Case Settings] */
|
||||
/* [Standard Motherboard Case Adjustments] */
|
||||
// adjustment for ssi-eeb, ssi-ceb, atx, micro-atx, dtx, flex-atx, mini-dtx, mini-itx, mini-stx, nano-itx,nuc, pico-itx PCB thickness from 2mm default//
|
||||
standard_motherboard_thickness = 0; //[-3:.01:3]
|
||||
// rear io plate opening for standard form motherboards
|
||||
@@ -101,78 +101,6 @@ edge_fillet = 0; //[0:.5:6]
|
||||
// tolerance for fitted surfaces
|
||||
tol = .25; //[-.5:.0625:.5]
|
||||
|
||||
/* [Top Standoff Global Settings] */
|
||||
// enable case top standoffs
|
||||
sbc_top_standoffs = true;
|
||||
// reverse standoff vertical orientation
|
||||
top_standoff_reverse = true;
|
||||
// enable wall support for standoffs
|
||||
top_sidewall_support = false;
|
||||
top_standoff_size = "m3"; //[m2_tap, m2, m2+, m2.5_tap, m2.5, m2.5+, m3_tap, m3, m3+, m4_tap, m4, m4+, custom]
|
||||
top_standoff_type = "blind"; //[none, countersunk, recessed, nut holder, blind]
|
||||
top_standoff_pillar = "hex"; //[hex, round]
|
||||
top_standoff_diameter = 5.75; //[0:.01:10]
|
||||
top_standoff_hole_size = 2.75; //[0:.01:5]
|
||||
top_standoff_support_size = 10; //[0:.01:15]
|
||||
top_standoff_support_height = 4; //[0:.01:50]
|
||||
top_standoff_insert = false;
|
||||
top_standoff_insert_dia = 4.2; //.01
|
||||
top_standoff_insert_height = 5.1; //.01
|
||||
|
||||
/* [Top Standoff Individual Settings] */
|
||||
// case top - lower left standoff settings
|
||||
top_rear_left_enable = true;
|
||||
top_rear_left_adjust = 0; //[-20:.01:20]
|
||||
top_rear_left_support = "rear"; //[none,left,rear,front,right]
|
||||
// case top - upper left standoff settings
|
||||
top_front_left_enable = true;
|
||||
top_front_left_adjust = 0; //[-20:.01:20]
|
||||
top_front_left_support = "front"; //[none,left,rear,front,right]
|
||||
// case top - lower right standoff settings
|
||||
top_rear_right_enable = true;
|
||||
top_rear_right_adjust = 0; //[-20:.01:20]
|
||||
top_rear_right_support = "rear"; //[none,left,rear,front,right]
|
||||
// case top - upper right standoff settings
|
||||
top_front_right_enable = true;
|
||||
top_front_right_adjust = 0; //[-20:.01:20]
|
||||
top_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [Bottom Standoff Global Settings] */
|
||||
// enable case bottom standoffs
|
||||
sbc_bottom_standoffs = true;
|
||||
// reverse standoff vertical orientation
|
||||
bottom_standoff_reverse = false;
|
||||
// enable wall support for standoffs
|
||||
bottom_sidewall_support = false;
|
||||
bottom_standoff_size = "m3"; //[m2_tap, m2, m2+, m2.5_tap, m2.5, m2.5+, m3_tap, m3, m3+, m4_tap, m4, m4+, custom]
|
||||
bottom_standoff_type = "countersunk"; //[none, countersunk, recessed, nut holder, blind]
|
||||
bottom_standoff_pillar = "hex"; //[hex, round]
|
||||
bottom_standoff_diameter = 5.75; //[2:.01:10]
|
||||
bottom_standoff_hole_size = 3.4; //[0:.01:5]
|
||||
bottom_standoff_support_size = 10; //[1:.01:15]
|
||||
bottom_standoff_support_height = 4; //[0:.01:50]
|
||||
bottom_standoff_insert = false;
|
||||
bottom_standoff_insert_dia = 4.2; //.01
|
||||
bottom_standoff_insert_height = 5.1; //.01
|
||||
|
||||
/* [Bottom Standoff Individual Settings] */
|
||||
// case bottom - rear left standoff settings
|
||||
bottom_rear_left_enable = true;
|
||||
bottom_rear_left_adjust = 0; //[-20:.01:20]
|
||||
bottom_rear_left_support = "rear"; //[none,left,rear,front,right]
|
||||
// case bottom - upper left standoff settings
|
||||
bottom_front_left_enable = true;
|
||||
bottom_front_left_adjust = 0; //[-20:.01:20]
|
||||
bottom_front_left_support = "front"; //[none,left,rear,front,right]
|
||||
// case bottom - lower right standoff settings
|
||||
bottom_rear_right_enable = true;
|
||||
bottom_rear_right_adjust = 0; //[-20:.01:20]
|
||||
bottom_rear_right_support = "rear"; //[none,left,rear,front,right]
|
||||
// case bottom - upper right standoff settings
|
||||
bottom_front_right_enable = true;
|
||||
bottom_front_right_adjust = 0; //[-20:.01:20]
|
||||
bottom_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [Fan and Vent Openings] */
|
||||
// top cover pattern
|
||||
top_cover_pattern = "solid"; //[solid,hex_5mm,hex_8mm,linear_vertical,linear_horizontal,astroid]
|
||||
@@ -203,7 +131,79 @@ text_color = "Green"; // [Green, Black, Dimgrey, White, Yellow, Orange, Red, Dar
|
||||
// sbc information text font
|
||||
text_font = "Nimbus Mono PS"; // [Nimbus Mono PS, Liberation Mono, Noto Sans Mono]
|
||||
|
||||
/* [Extended Top Standoffs] */
|
||||
/* [SBC Top Standoff Global Settings] */
|
||||
// enable case top standoffs
|
||||
sbc_top_standoffs = true;
|
||||
// reverse standoff vertical orientation
|
||||
top_standoff_reverse = true;
|
||||
// enable wall support for standoffs
|
||||
top_sidewall_support = false;
|
||||
top_standoff_size = "m3"; //[m2_tap, m2, m2+, m2.5_tap, m2.5, m2.5+, m3_tap, m3, m3+, m4_tap, m4, m4+, custom]
|
||||
top_standoff_type = "blind"; //[none, countersunk, recessed, nut holder, blind]
|
||||
top_standoff_pillar = "hex"; //[hex, round]
|
||||
top_standoff_diameter = 5.75; //[0:.01:10]
|
||||
top_standoff_hole_size = 2.75; //[0:.01:5]
|
||||
top_standoff_support_size = 10; //[0:.01:15]
|
||||
top_standoff_support_height = 4; //[0:.01:50]
|
||||
top_standoff_insert = false;
|
||||
top_standoff_insert_dia = 4.2; //.01
|
||||
top_standoff_insert_height = 5.1; //.01
|
||||
|
||||
/* [SBC Top Standoff Individual Settings] */
|
||||
// case top - lower left standoff settings
|
||||
top_rear_left_enable = true;
|
||||
top_rear_left_adjust = 0; //[-20:.01:20]
|
||||
top_rear_left_support = "rear"; //[none,left,rear,front,right]
|
||||
// case top - upper left standoff settings
|
||||
top_front_left_enable = true;
|
||||
top_front_left_adjust = 0; //[-20:.01:20]
|
||||
top_front_left_support = "front"; //[none,left,rear,front,right]
|
||||
// case top - lower right standoff settings
|
||||
top_rear_right_enable = true;
|
||||
top_rear_right_adjust = 0; //[-20:.01:20]
|
||||
top_rear_right_support = "rear"; //[none,left,rear,front,right]
|
||||
// case top - upper right standoff settings
|
||||
top_front_right_enable = true;
|
||||
top_front_right_adjust = 0; //[-20:.01:20]
|
||||
top_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [SBC Bottom Standoff Global Settings] */
|
||||
// enable case bottom standoffs
|
||||
sbc_bottom_standoffs = true;
|
||||
// reverse standoff vertical orientation
|
||||
bottom_standoff_reverse = false;
|
||||
// enable wall support for standoffs
|
||||
bottom_sidewall_support = false;
|
||||
bottom_standoff_size = "m3"; //[m2_tap, m2, m2+, m2.5_tap, m2.5, m2.5+, m3_tap, m3, m3+, m4_tap, m4, m4+, custom]
|
||||
bottom_standoff_type = "countersunk"; //[none, countersunk, recessed, nut holder, blind]
|
||||
bottom_standoff_pillar = "hex"; //[hex, round]
|
||||
bottom_standoff_diameter = 5.75; //[2:.01:10]
|
||||
bottom_standoff_hole_size = 3.4; //[0:.01:5]
|
||||
bottom_standoff_support_size = 10; //[1:.01:15]
|
||||
bottom_standoff_support_height = 4; //[0:.01:50]
|
||||
bottom_standoff_insert = false;
|
||||
bottom_standoff_insert_dia = 4.2; //.01
|
||||
bottom_standoff_insert_height = 5.1; //.01
|
||||
|
||||
/* [SBC Bottom Standoff Individual Settings] */
|
||||
// case bottom - rear left standoff settings
|
||||
bottom_rear_left_enable = true;
|
||||
bottom_rear_left_adjust = 0; //[-20:.01:20]
|
||||
bottom_rear_left_support = "rear"; //[none,left,rear,front,right]
|
||||
// case bottom - upper left standoff settings
|
||||
bottom_front_left_enable = true;
|
||||
bottom_front_left_adjust = 0; //[-20:.01:20]
|
||||
bottom_front_left_support = "front"; //[none,left,rear,front,right]
|
||||
// case bottom - lower right standoff settings
|
||||
bottom_rear_right_enable = true;
|
||||
bottom_rear_right_adjust = 0; //[-20:.01:20]
|
||||
bottom_rear_right_support = "rear"; //[none,left,rear,front,right]
|
||||
// case bottom - upper right standoff settings
|
||||
bottom_front_right_enable = true;
|
||||
bottom_front_right_adjust = 0; //[-20:.01:20]
|
||||
bottom_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [Extended Case Top Standoffs] */
|
||||
// enable case extended standoffs
|
||||
ext_top_standoffs = false;
|
||||
ext_top_standoff_reverse = true;
|
||||
@@ -219,7 +219,7 @@ ext_top_standoff_support_height = 4; //[0:.01:50]
|
||||
ext_top_standoff_insert = false;
|
||||
ext_top_standoff_insert_dia = 4.2; //.01
|
||||
ext_top_standoff_insert_height = 5.1; //.01
|
||||
/* [Extended Top Standoff Individual Settings] */
|
||||
/* [Extended Case Top Standoff Individual Settings] */
|
||||
// extended case top - lower left standoff settings
|
||||
ext_top_rear_left_enable = true;
|
||||
ext_top_rear_left_adjust = 0; //[-20:.01:20]
|
||||
@@ -237,7 +237,7 @@ ext_top_front_right_enable = true;
|
||||
ext_top_front_right_adjust = 0; //[-20:.01:20]
|
||||
ext_top_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [Extended Bottom Standoffs] */
|
||||
/* [Extended Case Bottom Standoffs] */
|
||||
// enable case bottom extended standoffs
|
||||
ext_bottom_standoffs = false;
|
||||
ext_bottom_standoff_reverse = false;
|
||||
@@ -254,7 +254,7 @@ ext_bottom_standoff_insert = false;
|
||||
ext_bottom_standoff_insert_dia = 4.2; //.01
|
||||
ext_bottom_standoff_insert_height = 5.1; //.01
|
||||
|
||||
/* [Extended Bottom Standoff Individual Settings] */
|
||||
/* [Extended Case Bottom Standoff Individual Settings] */
|
||||
// extended case bottom - rear left standoff settings
|
||||
ext_bottom_rear_left_enable = true;
|
||||
ext_bottom_rear_left_adjust = 0; //[-20:.01:20]
|
||||
@@ -272,6 +272,75 @@ ext_bottom_front_right_enable = true;
|
||||
ext_bottom_front_right_adjust = 0; //[-20:.01:20]
|
||||
ext_bottom_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [Multiple PCB Top Standoffs] */
|
||||
// enable multiple pcb standoffs
|
||||
multipcb_top_standoffs = false;
|
||||
multipcb_top_standoff_reverse = true;
|
||||
// enable wall support for multiple pcb
|
||||
multipcb_top_sidewall_support = false;
|
||||
multipcb_top_standoff_size = "m2.5"; //[m2_tap, m2, m2+, m2.5_tap, m2.5, m2.5+, m3_tap, m3, m3+, m4_tap, m4, m4+, custom]
|
||||
multipcb_top_standoff_type = "blind"; //[none, countersunk, recessed, nut holder, blind]
|
||||
multipcb_top_standoff_pillar = "hex"; //[hex, round]
|
||||
multipcb_top_standoff_diameter = 5.75; //[0:.01:10]
|
||||
multipcb_top_standoff_hole_size = 2.75; //[0:.01:5]
|
||||
multipcb_top_standoff_support_size = 7; //[0:.01:15]
|
||||
multipcb_top_standoff_support_height = 4; //[0:.01:50]
|
||||
multipcb_top_standoff_insert = false;
|
||||
multipcb_top_standoff_insert_dia = 4.2; //.01
|
||||
multipcb_top_standoff_insert_height = 5.1; //.01
|
||||
/* [Multiple PCB Top Standoff Individual Settings] */
|
||||
// multiple pcb top - lower left standoff settings
|
||||
multipcb_top_rear_left_enable = true;
|
||||
multipcb_top_rear_left_adjust = 0; //[-20:.01:20]
|
||||
multipcb_top_rear_left_support = "rear"; //[none,left,rear,front,right]
|
||||
// multiple pcb - upper left standoff settings
|
||||
multipcb_top_front_left_enable = true;
|
||||
multipcb_top_front_left_adjust = 0; //[-20:.01:20]
|
||||
multipcb_top_front_left_support = "front"; //[none,left,rear,front,right]
|
||||
// multiple pcb top - lower right standoff settings
|
||||
multipcb_top_rear_right_enable = true;
|
||||
multipcb_top_rear_right_adjust = 0; //[-20:.01:20]
|
||||
multipcb_top_rear_right_support = "rear"; //[none,left,rear,front,right]
|
||||
// multiple pcb top - upper right standoff settings
|
||||
multipcb_top_front_right_enable = true;
|
||||
multipcb_top_front_right_adjust = 0; //[-20:.01:20]
|
||||
multipcb_top_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
/* [Multiple PCB Bottom Standoffs] */
|
||||
// enable multiple pcb extended standoffs
|
||||
multipcb_bottom_standoffs = false;
|
||||
multipcb_bottom_standoff_reverse = false;
|
||||
// enable wall support for multiple pcb standoffs
|
||||
multipcb_bottom_sidewall_support = false;
|
||||
multipcb_bottom_standoff_size = "m2.5"; //[m2_tap, m2, m2+, m2.5_tap, m2.5, m2.5+, m3_tap, m3, m3+, m4_tap, m4, m4+, custom]
|
||||
multipcb_bottom_standoff_type = "countersunk"; //[none, countersunk, recessed, nut holder, blind]
|
||||
multipcb_bottom_standoff_pillar = "hex"; //[hex, round]
|
||||
multipcb_bottom_standoff_diameter = 5.75; //[2:.01:10]
|
||||
multipcb_bottom_standoff_hole_size = 3.4; //[0:.01:5]
|
||||
multipcb_bottom_standoff_support_size = 7; //[1:.01:15]
|
||||
multipcb_bottom_standoff_support_height = 4; //[0:.01:50]
|
||||
multipcb_bottom_standoff_insert = false;
|
||||
multipcb_bottom_standoff_insert_dia = 4.2; //.01
|
||||
multipcb_bottom_standoff_insert_height = 5.1; //.01
|
||||
|
||||
/* [Multiple PCB Bottom Standoff Individual Settings] */
|
||||
// multiple pcb bottom - rear left standoff settings
|
||||
multipcb_bottom_rear_left_enable = true;
|
||||
multipcb_bottom_rear_left_adjust = 0; //[-20:.01:20]
|
||||
multipcb_bottom_rear_left_support = "rear"; //[none,left,rear,front,right]
|
||||
// multiple pcb bottom - upper left standoff settings
|
||||
multipcb_bottom_front_left_enable = true;
|
||||
multipcb_bottom_front_left_adjust = 0; //[-20:.01:20]
|
||||
multipcb_bottom_front_left_support = "front"; //[none,left,rear,front,right]
|
||||
// multiple pcb bottom - lower right standoff settings
|
||||
multipcb_bottom_rear_right_enable = true;
|
||||
multipcb_bottom_rear_right_adjust = 0; //[-20:.01:20]
|
||||
multipcb_bottom_rear_right_support = "rear"; //[none,left,rear,front,right]
|
||||
// multiple pcb bottom - upper right standoff settings
|
||||
multipcb_bottom_front_right_enable = true;
|
||||
multipcb_bottom_front_right_adjust = 0; //[-20:.01:20]
|
||||
multipcb_bottom_front_right_support = "front"; //[none,left,rear,front,right]
|
||||
|
||||
a = search([accessory_name],accessory_data);
|
||||
s = search([sbc_model],sbc_data);
|
||||
|
||||
@@ -321,6 +390,7 @@ bottom_standoff = [bottom_standoff_size,
|
||||
bottom_standoff_insert,
|
||||
bottom_standoff_insert_dia,
|
||||
bottom_standoff_insert_height];
|
||||
|
||||
ext_top_standoff = [ext_top_standoff_size,
|
||||
ext_top_standoff_diameter,
|
||||
18,
|
||||
@@ -334,6 +404,7 @@ ext_top_standoff = [ext_top_standoff_size,
|
||||
ext_top_standoff_insert,
|
||||
ext_top_standoff_insert_dia,
|
||||
ext_top_standoff_insert_height];
|
||||
|
||||
ext_bottom_standoff = [ext_bottom_standoff_size,
|
||||
ext_bottom_standoff_diameter,
|
||||
6,
|
||||
@@ -347,6 +418,34 @@ ext_bottom_standoff = [ext_bottom_standoff_size,
|
||||
ext_bottom_standoff_insert,
|
||||
ext_bottom_standoff_insert_dia,
|
||||
ext_bottom_standoff_insert_height];
|
||||
|
||||
multipcb_top_standoff = [multipcb_top_standoff_size,
|
||||
multipcb_top_standoff_diameter,
|
||||
18,
|
||||
multipcb_top_standoff_hole_size,
|
||||
multipcb_top_standoff_support_size,
|
||||
multipcb_top_standoff_support_height,
|
||||
multipcb_top_standoff_type,
|
||||
multipcb_top_standoff_pillar,
|
||||
multipcb_top_rear_left_support,
|
||||
multipcb_top_standoff_reverse,
|
||||
multipcb_top_standoff_insert,
|
||||
multipcb_top_standoff_insert_dia,
|
||||
multipcb_top_standoff_insert_height];
|
||||
|
||||
multipcb_bottom_standoff = [multipcb_bottom_standoff_size,
|
||||
multipcb_bottom_standoff_diameter,
|
||||
6,
|
||||
multipcb_bottom_standoff_hole_size,
|
||||
multipcb_bottom_standoff_support_size,
|
||||
multipcb_bottom_standoff_support_height,
|
||||
multipcb_bottom_standoff_type,
|
||||
multipcb_bottom_standoff_pillar,
|
||||
multipcb_bottom_rear_left_support,
|
||||
multipcb_bottom_standoff_reverse,
|
||||
multipcb_bottom_standoff_insert,
|
||||
multipcb_bottom_standoff_insert_dia,
|
||||
multipcb_bottom_standoff_insert_height];
|
||||
|
||||
adj = .01;
|
||||
$fn=90;
|
||||
|
||||
Reference in New Issue
Block a user