shinys000114/SBC_Case_Builder
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

plumbed new heatsink, gpio, uart mask selection thru sbcmf cmdline

Browse Source
This commit is contained in:
Edward Kisiel
2024-01-29 21:07:08 -05:00
parent adf72494a1
commit d084cab29f
11 changed files with 1075 additions and 1057 deletions
Download Patch File Download Diff File Expand all files Collapse all files

75
mod/case_bottom.scad
View File

@@ -27,7 +27,7 @@ module case_bottom(case_design) {
translate([(width*(1/5))-8-(wallthick+gap),depth-(2*wallthick)-gap-adj,0])
cube([8,wallthick+2*adj,floorthick]);
translate([width-(width*(1/5))-(wallthick+gap),depth-(2*wallthick)-gap-adj,0])
cube([8,wallthick+2*adj,floorthick]);
cube([8,wallthick+2*adj,floorthick]);
translate([(width*(1/5))-8-(wallthick+gap),-wallthick-gap+adj,0])
cube([8,wallthick+2*adj,floorthick]);
translate([width-(width*(1/5))-(wallthick+gap),-wallthick-gap+adj,0])
@@ -51,21 +51,23 @@ module case_bottom(case_design) {
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
top=[0,0,0,0],bottom=[2,2,2,2], $fn=90);
}
// right side nut
// right side nut
translate([width-wallthick-gap-wallthick-4+adj,wallthick+gap+10,
floorthick+3.4]) rotate([90,0,90])
cylinder(d=10, h=4, $fn=6);
// left side nut
translate([-adj-gap,wallthick+gap+10,floorthick+3.4])
rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
if(depth >= 75 && sbc_model != "visionfive2" && sbc_model != "visionfive2q" && sbc_model != "rock5b-v1.42" && sbc_model != "rock5bq-v1.42" && sbc_model != "rock5b-v1.3") {
if(depth >= 75 && sbc_model != "visionfive2" && sbc_model != "visionfive2q" &&
sbc_model != "rock5b" && sbc_model != "rock5bq" && sbc_model != "rock5b-v1.3") {
translate([width-wallthick-gap-wallthick-4+adj,depth-wallthick-gap-10,
floorthick+3.4]) rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
translate([-adj-gap,depth-wallthick-gap-10,floorthick+3.4])
rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
}
else {
if(sbc_model == "visionfive2" || sbc_model == "visionfive2q" || sbc_model == "rock5b-v1.42" || sbc_model == "rock5bq-v1.42" || sbc_model == "rock5b-v1.3") {
if(sbc_model == "visionfive2" || sbc_model == "visionfive2q" || sbc_model == "rock5b" ||
sbc_model == "rock5bq" || sbc_model == "rock5b-v1.3") {
translate([width-wallthick-gap-wallthick-4+adj,wallthick+gap+58,
floorthick+3.4]) rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
translate([-adj-gap,wallthick+gap+58,floorthick+3.4])
@@ -93,7 +95,7 @@ module case_bottom(case_design) {
translate([-wallthick-gap,-wallthick-gap,bottom_height-adj])
cube([width,wallthick,top_height-floorthick]);
}
}
if(case_design == "round") {
difference() {
translate([pcb_width/2,pcb_depth/2,bottom_height/2]) rotate([0,0,30])
@@ -129,7 +131,7 @@ module case_bottom(case_design) {
cube([width+50,50+adj,top_height-2*floorthick-2]);
}
}
}
}
if(case_design == "hex") {
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
@@ -183,9 +185,9 @@ module case_bottom(case_design) {
cube([300,depth+100,case_z-2*floorthick-2]);
translate([(-width+50)/2,-50,bottom_height-2*adj])
cube([width+50,50+adj,top_height-2*floorthick-2]);
}
}
}
}
}
if(case_design == "snap") {
difference() {
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,(floorthick+case_z)/2])
@@ -255,10 +257,10 @@ module case_bottom(case_design) {
}
// side attachment holes
if(case_design == "tray") {
// right side bottom attachment holes
// right side bottom attachment holes
translate([width-2*(wallthick+gap)-sidethick-adj,wallthick+gap+10,
floorthick+3.4]) rotate([0,90,0]) cylinder(d=3, h=10+sidethick+(2*adj));
// right side bottom nut inset
// right side bottom nut inset
translate([width-3.5-(2*wallthick)-gap-.6,wallthick+gap+10,
floorthick+3.4]) rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
// left side bottom attachment holes
@@ -267,7 +269,8 @@ module case_bottom(case_design) {
// left side bottom nut inset
translate([-gap+.6,wallthick+gap+10,floorthick+3.4])
rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
if(depth >= 75 && sbc_model != "visionfive2" && sbc_model != "visionfive2q" && sbc_model != "rock5b-v1.42" && sbc_model != "rock5bq-v1.42" && sbc_model != "rock5b-v1.3") {
if(depth >= 75 && sbc_model != "visionfive2" && sbc_model != "visionfive2q" &&
sbc_model != "rock5b" && sbc_model != "rock5bq" && sbc_model != "rock5b-v1.3") {
translate([width-2*(wallthick+gap)-sidethick-adj,depth-wallthick-gap-10,
floorthick+3.4]) rotate([0,90,0])
cylinder(d=3, h=10+sidethick+(2*adj));
@@ -280,7 +283,8 @@ module case_bottom(case_design) {
rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
}
else {
if(sbc_model == "visionfive2" || sbc_model == "visionfive2q" || sbc_model == "rock5b-v1.42" || sbc_model == "rock5bq-v1.42" || sbc_model == "rock5b-v1.3") {
if(sbc_model == "visionfive2" || sbc_model == "visionfive2q" || sbc_model == "rock5b" ||
sbc_model == "rock5bq" || sbc_model == "rock5b-v1.3") {
translate([width-3*(wallthick+gap)-adj,wallthick+gap+58,
floorthick+3.4]) rotate([0,90,0])
cylinder(d=3, h=10+sidethick+(2*adj));
@@ -292,7 +296,7 @@ module case_bottom(case_design) {
translate([-gap+.6,wallthick+gap+58,floorthick+3.4])
rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
}
else {
else {
translate([width-3*(wallthick+gap)-adj,wallthick+gap+40,
floorthick+3.4]) rotate([0,90,0]) cylinder(d=3, h=10+sidethick+(2*adj));
translate([-wallthick-gap-adj-6,wallthick+gap+40,
@@ -313,9 +317,10 @@ module case_bottom(case_design) {
pcb_hole_x = sbc_data[s[0]][i+4];
pcb_hole_y = sbc_data[s[0]][i+5];
pcb_hole_z = sbc_data[s[0]][i+6];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
if(class == "pcbhole" && id == pcb_id && (pcb_hole_pos == "left_rear" || pcb_hole_pos == "left_front" || pcb_hole_pos == "right_rear" || pcb_hole_pos == "right_front")) {
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
if(class == "pcbhole" && id == pcb_id && (pcb_hole_pos == "left_rear" || pcb_hole_pos == "left_front" ||
pcb_hole_pos == "right_rear" || pcb_hole_pos == "right_front")) {
translate([pcb_hole_x,pcb_hole_y,-1]) cylinder(d=6.5, h=bottom_height);
}
}
@@ -353,9 +358,9 @@ module case_bottom(case_design) {
pcb_hole_x = sbc_data[s[0]][i+4];
pcb_hole_y = sbc_data[s[0]][i+5];
pcb_hole_z = sbc_data[s[0]][i+6];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
if (pcb_hole_pos == "left_rear") {
normal_standoff = [bottom_standoff[0],
@@ -430,12 +435,12 @@ module case_bottom(case_design) {
}
// left-rear standoff
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
translate([(c_fillet/2),(c_fillet/2),0]) standoff(bottom_ext_standoff);
translate([(c_fillet/2),(c_fillet/2),0]) standoff(bottom_ext_standoff);
}
// left-front standoff
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
translate([(c_fillet/2),depth-(c_fillet/2)-(2*(wallthick+gap)),0])
standoff(bottom_ext_standoff);
standoff(bottom_ext_standoff);
}
}
// standoff sidewall support
@@ -445,9 +450,9 @@ module case_bottom(case_design) {
pcb_hole_x = sbc_data[s[0]][i+4]+pcb_loc_x;
pcb_hole_y = sbc_data[s[0]][i+5]+pcb_loc_y;
pcb_hole_z = sbc_data[s[0]][i+6];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
if(pcb_hole_pos == "left_rear") {
translate([pcb_hole_x-1, pcb_hole_y-(bottom_standoff[0]/2)-(gap+adj)-1,0])
@@ -473,7 +478,7 @@ module case_bottom(case_design) {
pcb_hole_x = sbc_data[s[0]][i+4]+pcb_loc_x;
pcb_hole_y = sbc_data[s[0]][i+5]+pcb_loc_y;
pcb_hole_z = sbc_data[s[0]][i+6];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_size = sbc_data[s[0]][i+9][0];
pcb_hole_pos = sbc_data[s[0]][i+10][4];
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
@@ -502,7 +507,7 @@ module case_bottom(case_design) {
cube([gap+1.5,2,bottom_height-pcb_z+pcb_loc_z+bottom_front_right]);
}
}
}
}
}
}
// extended standoff sidewall support
@@ -512,7 +517,7 @@ module case_bottom(case_design) {
translate([width-(2*(wallthick+gap))-(c_fillet/2)+(bottom_ext_standoff[0]/2)-.5,
(c_fillet/2)-1,0]) cube([gap+adj+2,2,bottom_ext_standoff[1]]);
}
// right-front standoff
// right-front standoff
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10)
|| width-pcb_loc_x-pcb_width >= 10) {
translate([width-(2*(wallthick+gap))-(c_fillet/2)+(bottom_ext_standoff[0]/2)-.5,
@@ -523,7 +528,7 @@ module case_bottom(case_design) {
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
translate([(c_fillet/2)-(wallthick+gap)-(bottom_ext_standoff[0]/2)+.6,
(c_fillet/2)-1,0]) cube([gap+adj+2,2,bottom_ext_standoff[1]]);
}
}
// left-front standoff
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
translate([(c_fillet/2)-(wallthick+gap)-(bottom_ext_standoff[0]/2)+.6,
@@ -550,7 +555,7 @@ module case_bottom(case_design) {
data_2 = accessory_data[a[0]][i+12];
data_3 = accessory_data[a[0]][i+13];
data_4 = accessory_data[a[0]][i+14];
if ((class == "sub" && face == "bottom") || class == "suball") {
if(accessory_highlight == false) {
parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
@@ -594,7 +599,7 @@ module case_bottom(case_design) {
parametric,size_x-17,size_y-1,floorthick+1,data_1,data_2,data_3,[.1,.1,.1,.1]);
parametric_move_sub("rectangle",loc_x+size_x-12.5,loc_y+(size_y/2)-6,loc_z-adj,face,rotation,
parametric,5.5,10.5,floorthick+.12,data_1,data_2,data_3,[5.5,5.5,5.5,5.5]);
}
}
else {
@@ -635,14 +640,14 @@ module case_bottom(case_design) {
parametric,size_x+2,size_y+1,size_z+2*adj,data_1,data_2,data_3,[.1,.1,.1,.1]);
}
}
}
}
}
// sbc openings
if(sbc_highlight == true) {
#translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z-adj]) sbc(sbc_model,"default",0,"default","default",true);
#translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z-adj]) sbc(sbc_model, cooling, fan_size, gpio_opening, uart_opening, true);
}
else {
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z-adj]) sbc(sbc_model,"default",0,"default","default",true);
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z-adj]) sbc(sbc_model, cooling, fan_size, gpio_opening, uart_opening, true);
}
// clean fillets
if(case_design == "shell") {
@@ -670,7 +675,7 @@ module case_bottom(case_design) {
data_2 = accessory_data[a[0]][i+12];
data_3 = accessory_data[a[0]][i+13];
data_4 = accessory_data[a[0]][i+14];
if(class == "add2" && face == "bottom") {
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
size_x,size_y,size_z,data_1,data_2,data_3,data_4);