930 lines
41 KiB
OpenSCAD
930 lines
41 KiB
OpenSCAD
/*
|
|
This file is part of SBC Case Builder https://github.com/hominoids/SBC_Case_Builder
|
|
Copyright 2022,2023,2024 Edward A. Kisiel hominoid@cablemi.com
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>
|
|
Code released under GPLv3: http://www.gnu.org/licenses/gpl.html
|
|
|
|
hd25(orientation, height, mask)
|
|
hd25_tab(side)
|
|
hd25_vtab(side)
|
|
hd35(orientation, mask)
|
|
hdd35_25holder(length)
|
|
hd35_tab(side)
|
|
hd35_vtab(side)
|
|
hd_bottom_holes(hd, orientation, side, thick, holetype)
|
|
hd_mount(hd, orientation, position, side)
|
|
|
|
*/
|
|
|
|
|
|
/*
|
|
NAME: hd25
|
|
DESCRIPTION: creates 2.5" hard drive model
|
|
TODO: none
|
|
|
|
USAGE: hd25(orientation, height, mask)
|
|
|
|
orientation = "landscape", "portrait"
|
|
height = drive height
|
|
mask[0] = true enables component mask
|
|
mask[1] = mask length
|
|
mask[2] = mask setback
|
|
mask[3] = mstyle "default", "bottom", "side", "both"
|
|
*/
|
|
|
|
module hd25(orientation, height, mask) {
|
|
|
|
hd25_x = 100;
|
|
hd25_y = 69.85;
|
|
hd25_z = height;
|
|
enablemask = mask[0];
|
|
mlength = mask[1];
|
|
msetback = mask[2];
|
|
mstyle = mask[3];
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(enablemask == true) {
|
|
if(orientation == "landscape" && (mstyle == "side" || mstyle == "both" || mstyle == "default")) {
|
|
translate([0, msetback, 0]) hd_holes(2.5, "landscape", "left", mlength);
|
|
translate([0, -msetback, 0]) hd_holes(2.5, "landscape", "right", mlength);
|
|
}
|
|
if(orientation == "landscape" && (mstyle == "bottom" || mstyle == "both")) {
|
|
translate([0, 0, msetback]) hd_holes(2.5, "landscape", "bottom", mlength);
|
|
}
|
|
if(orientation == "portrait" && (mstyle == "side" || mstyle == "both" || mstyle == "default")) {
|
|
translate([msetback, 0, 0]) hd_holes(2.5, "portrait", "left", mlength);
|
|
translate([-msetback, 0, 0]) hd_holes(2.5, "portrait", "right", mlength);
|
|
}
|
|
if(orientation == "portrait" && (mstyle == "bottom" || mstyle == "both")) {
|
|
translate([0, 0, -mlength+msetback]) hd_holes(2.5, "portrait", "bottom", mlength);
|
|
}
|
|
}
|
|
if(enablemask == false) {
|
|
if(orientation == "landscape") {
|
|
difference() {
|
|
color("LightGrey",.6) cube([hd25_x,hd25_y,hd25_z]);
|
|
|
|
// bottom screw holes
|
|
color("Black",.6) translate([9.4,4.07,-adj]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,4.07,-adj]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,65.79,-adj]) cylinder(d=3,h=4);
|
|
color("Black",.6) translate([9.4,65.79,-adj]) cylinder(d=3,h=4);
|
|
|
|
// side screw holes
|
|
color("Black",.6) translate([9.4,-adj,3]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,-adj,3]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,hd25_y+adj,3]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([9.4,hd25_y+adj,3]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
|
|
// connector opening
|
|
color("LightSlateGray",.6) translate([hd25_x-5,11,-1]) cube([5+adj,32,5+adj]);
|
|
}
|
|
}
|
|
if(orientation == "portrait") {
|
|
translate([0,hd25_x,0]) rotate([0,0,270])
|
|
difference() {
|
|
color("LightGrey",.6) cube([hd25_x,hd25_y,hd25_z]);
|
|
|
|
// bottom screw holes
|
|
color("Black",.6) translate([9.4,4.07,-adj]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,4.07,-adj]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,65.79,-adj]) cylinder(d=3,h=4);
|
|
color("Black",.6) translate([9.4,65.79,-adj]) cylinder(d=3,h=4);
|
|
|
|
// side screw holes
|
|
color("Black",.6) translate([9.4,-adj,3]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,-adj,3]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,hd25_y+adj,3]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([9.4,hd25_y+adj,3]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
|
|
// connector opening
|
|
color("LightSlateGray",.6) translate([hd25_x-5,11,-1]) cube([5+adj,32,5+adj]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd25_tab
|
|
DESCRIPTION: creates 2.5" hard drive tabs for horizontal mounting
|
|
TODO: none
|
|
|
|
USAGE: hd25_tab(side)
|
|
|
|
side = "left", "right"
|
|
*/
|
|
|
|
module hd25_tab(side) {
|
|
|
|
width = 15;
|
|
l_width = 26;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adj,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([4.07,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adj,(width/2)-(length/2)-depth/2,3]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
translate([-height-adj,(width/2)-(length/2)-depth/2,21]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adj,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([-4.07,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adj,(width/2)-(length/2)-depth/2,3]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
translate([-adj,(width/2)-(length/2)-depth/2,21]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd25_vtab
|
|
DESCRIPTION: creates 2.5" hard drive tabs for vertical mounting
|
|
TODO: none
|
|
|
|
USAGE: hd25_vtab(side)
|
|
|
|
side = "left", "right"
|
|
*/
|
|
|
|
module hd25_vtab(side) {
|
|
|
|
width = 15;
|
|
l_width = 16;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adj,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([3,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adj,1.5+(width/2)-(length/2)-depth/2,5.57]) rotate([90,90,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adj,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([-3,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adj,1.5+(width/2)-(length/2)-depth/2,5.57]) rotate([90,90,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd35
|
|
DESCRIPTION: creates 3.5" hard drive model
|
|
TODO: none
|
|
|
|
USAGE: hd35(orientation, mask)
|
|
|
|
orientation = "landscape", "portrait"
|
|
mask[0] = true enables component mask
|
|
mask[1] = mask length
|
|
mask[2] = mask setback
|
|
mask[3] = mstyle "default", "bottom", "side", "both"
|
|
*/
|
|
|
|
module hd35(orientation, mask) {
|
|
|
|
hd35_x = 147;
|
|
hd35_y = 101.6;
|
|
hd35_z = 26.1;
|
|
enablemask = mask[0];
|
|
mlength = mask[1];
|
|
msetback = mask[2];
|
|
mstyle = mask[3];
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(enablemask == true) {
|
|
if(orientation == "landscape" && (mstyle == "side" || mstyle == "both" || mstyle == "default")) {
|
|
translate([0, msetback, 0]) hd_holes(3.5, "landscape", "left", mlength);
|
|
translate([0, -msetback, 0]) hd_holes(3.5, "landscape", "right", mlength);
|
|
}
|
|
if(orientation == "landscape" && (mstyle == "bottom" || mstyle == "both")) {
|
|
translate([0, 0, msetback]) hd_holes(3.5, "landscape", "bottom", mlength);
|
|
}
|
|
if(orientation == "portrait" && (mstyle == "side" || mstyle == "both" || mstyle == "default")) {
|
|
translate([msetback, 0, 0]) hd_holes(3.5, "portrait", "left", mlength);
|
|
translate([-msetback, 0, 0]) hd_holes(3.5, "portrait", "right", mlength);
|
|
}
|
|
if(orientation == "portrait" && (mstyle == "bottom" || mstyle == "both")) {
|
|
translate([0, 0, -mlength+msetback]) hd_holes(3.5, "portrait", "bottom", mlength);
|
|
}
|
|
}
|
|
if(enablemask == false) {
|
|
if(orientation == "landscape") {
|
|
difference() {
|
|
color("LightGrey",.6) cube([hd35_x,hd35_y,hd35_z]);
|
|
|
|
// bottom screw holes
|
|
color("Black",.6) translate([29.52,3.18,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([61.27,3.18,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([105.72,3.18,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([29.52,98.43,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([61.27,98.43,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([105.72,98.43,-adj]) cylinder(d=3,h=3+adj);
|
|
|
|
// side screw holes
|
|
color("Black",.6) translate([16.9,-adj,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([76.6,-adj,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([118.5,-adj,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([118.5,hd35_y+adj,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([76.6,hd35_y+adj,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([16.9,hd35_y+adj,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
|
|
// connector opening
|
|
color("LightSlateGray",.6) translate([hd35_x-5,11,-1]) cube([5+adj,32,5+adj]);
|
|
}
|
|
}
|
|
if(orientation == "portrait") {
|
|
translate([0,hd35_x,0]) rotate([0,0,270])
|
|
difference() {
|
|
color("LightGrey",.6) cube([hd35_x,hd35_y,hd35_z]);
|
|
|
|
// bottom screw holes
|
|
color("Black",.6) translate([29.52,3.18,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([61.27,3.18,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([105.72,3.18,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([29.52,98.43,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([61.27,98.43,-adj]) cylinder(d=3,h=3+adj);
|
|
color("Black",.6) translate([105.72,98.43,-adj]) cylinder(d=3,h=3+adj);
|
|
|
|
// side screw holes
|
|
color("Black",.6) translate([16.9,-adj,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([76.6,-adj,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([118.5,-adj,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([118.5,hd35_y+adj,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([76.6,hd35_y+adj,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([16.9,hd35_y+adj,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
|
|
// connector opening
|
|
color("LightSlateGray",.6) translate([hd35_x-5,11,-1]) cube([5+adj,32,5+adj]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd35_25holder
|
|
DESCRIPTION: 3.5" hdd to 2.5" hdd holder
|
|
TODO: none
|
|
|
|
USAGE: hdd35_25holder(length, width=101.6)
|
|
|
|
length = length of holder min. 145mm for 3.5" drive
|
|
*/
|
|
|
|
module hd35_25holder(length, width=101.6) {
|
|
|
|
wallthick = 3;
|
|
floorthick = 2;
|
|
hd35_x = length; // 145mm for 3.5" drive
|
|
hd35_y = width;
|
|
hd35_z = 12;
|
|
hd25_x = 100;
|
|
hd25_y = 69.85;
|
|
hd25_z = 9.5;
|
|
hd25_xloc = 2; // or (hd35_x-hd25_x)/2
|
|
hd25_yloc = (hd35_y-hd25_y)/2;
|
|
hd25_zloc = 9.5;
|
|
adj = .1;
|
|
$fn=90;
|
|
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
translate([(hd35_x/2),(hd35_y/2),(hd35_z/2)])
|
|
cube_fillet_inside([hd35_x,hd35_y,hd35_z],
|
|
vertical=[3,3,3,3], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
translate([(hd35_x/2),(hd35_y/2),(hd35_z/2)+floorthick])
|
|
cube_fillet_inside([hd35_x-(wallthick*2),hd35_y-(wallthick*2),hd35_z],
|
|
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
|
|
// end trim
|
|
translate([-adj,5,wallthick+2]) cube([wallthick+(adj*2),hd35_y-10,10]);
|
|
translate([hd35_x-wallthick-adj,5,wallthick+2]) cube([wallthick+(adj*2),hd35_y-10,10]);
|
|
|
|
// bottom vents
|
|
for ( r=[15:40:hd35_x-40]) {
|
|
for (c=[hd35_y-76:4:75]) {
|
|
translate ([r,c,-adj]) cube([35,2,wallthick+(adj*2)]);
|
|
}
|
|
}
|
|
}
|
|
// 2.5 hdd bottom support
|
|
translate([9.4+hd25_xloc,4.07+hd25_yloc,floorthick-adj]) cylinder(d=8,h=4);
|
|
translate([86+hd25_xloc,4.07+hd25_yloc,floorthick-adj]) cylinder(d=8,h=4);
|
|
translate([86+hd25_xloc,65.79+hd25_yloc,floorthick-adj]) cylinder(d=8,h=4);
|
|
translate([9.4+hd25_xloc,65.79+hd25_yloc,floorthick-adj]) cylinder(d=8,h=4);
|
|
|
|
// side nut holder support
|
|
translate([16,wallthick-adj,7]) rotate([-90,0,0]) cylinder(d=10,h=3);
|
|
translate([76,wallthick-adj,7]) rotate([-90,0,0]) cylinder(d=10,h=3);
|
|
if(length >= 120) {
|
|
translate([117.5,wallthick-adj,7]) rotate([-90,0,0]) cylinder(d=10,h=3);
|
|
translate([117.5,hd35_y-wallthick+adj,7]) rotate([90,0,0]) cylinder(d=10,h=3);
|
|
}
|
|
translate([76,hd35_y-wallthick+adj,7]) rotate([90,0,0]) cylinder(d=10,h=3);
|
|
translate([16,hd35_y-wallthick+adj,7]) rotate([90,0,0]) cylinder(d=10,h=3);
|
|
|
|
// bottom-side support
|
|
translate([wallthick,wallthick,floorthick-2]) rotate([45,0,0]) cube([hd35_x-(wallthick*2),3,3]);
|
|
translate([wallthick,hd35_y-wallthick+adj,floorthick-2]) rotate([45,0,0]) cube([hd35_x-(wallthick*2),3,3]);
|
|
|
|
}
|
|
// bottom screw holes
|
|
translate([9.4+hd25_xloc,4.07+hd25_yloc,-adj]) cylinder(d=3,h=(floorthick*3)+(adj*2));
|
|
translate([86+hd25_xloc,4.07+hd25_yloc,-adj]) cylinder(d=3,h=(floorthick*3)+(adj*2));
|
|
translate([86+hd25_xloc,65.79+hd25_yloc,-adj]) cylinder(d=3,h=(floorthick*3)+(adj*2));
|
|
translate([9.4+hd25_xloc,65.79+hd25_yloc,-adj]) cylinder(d=3,h=(floorthick*3)+(adj*2));
|
|
|
|
// countersink holes
|
|
translate([9.4+hd25_xloc,4.07+hd25_yloc,-adj]) cylinder(d1=6.5, d2=3, h=3);
|
|
translate([86+hd25_xloc,4.07+hd25_yloc,-adj]) cylinder(d1=6.5, d2=3, h=3);
|
|
translate([86+hd25_xloc,65.79+hd25_yloc,-adj]) cylinder(d1=6.5, d2=3, h=3);
|
|
translate([9.4+hd25_xloc,65.79+hd25_yloc,-adj]) cylinder(d1=6.5, d2=3, h=3);
|
|
|
|
// side screw holes
|
|
translate([16,-adj,7]) rotate([-90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([76,-adj,7]) rotate([-90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([117.5,-adj,7]) rotate([-90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([117.5,hd35_y+adj,7]) rotate([90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([76,hd35_y+adj,7]) rotate([90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([16,hd35_y+adj,7]) rotate([90,0,0]) cylinder(d=3.6,h=7);
|
|
|
|
// side nut trap
|
|
translate([16,wallthick-adj,7]) rotate([-90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([76,wallthick-adj,7]) rotate([-90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([117.5,wallthick-adj,7]) rotate([-90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([117.5,hd35_y-wallthick-adj,7]) rotate([90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([76,hd35_y-wallthick-adj,7]) rotate([90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([16,hd35_y-wallthick-adj,7]) rotate([90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd35_tab
|
|
DESCRIPTION: creates 3.5" hard drive tabs for horizontal mounting
|
|
TODO: none
|
|
|
|
USAGE: hd35_tab(side)
|
|
|
|
side = "left", "right"
|
|
*/
|
|
|
|
module hd35_tab(side) {
|
|
|
|
width = 15;
|
|
l_width = 46;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
|
|
translate([adj,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
|
|
}
|
|
translate([3.18,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adj,(width/2)-(length/2)-depth/2,6.35]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
translate([-height-adj,(width/2)-(length/2)-depth/2,38.35]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
|
|
translate([adj,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
|
|
}
|
|
translate([-3.18,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adj,(width/2)-(length/2)-depth/2,6.35]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
translate([-adj,(width/2)-(length/2)-depth/2,38.35]) rotate([90,0,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd35_vtab
|
|
DESCRIPTION: creates 3.5" hard drive tabs for vertical mounting
|
|
TODO: none
|
|
|
|
USAGE: hd35_vtab(side)
|
|
|
|
side = "left", "right"
|
|
*/
|
|
|
|
module hd35_vtab(side) {
|
|
|
|
width = 15;
|
|
l_width = 16;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adj,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([3,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adj,1.5+(width/2)-(length/2)-depth/2,5.57]) rotate([90,90,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adj,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adj,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([-3,0,-adj]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adj,1.5+(width/2)-(length/2)-depth/2,5.57]) rotate([90,90,90]) slot(hole,length,height+(2*adj));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd_holes
|
|
DESCRIPTION: creates 2.5" and 3.5" hard drive hole mask for mounting
|
|
TODO: none
|
|
|
|
USAGE: hd_holes(hd, orientation, side, thick, holetype)
|
|
|
|
hd = 2.5, 3.5
|
|
orientation = "portrait", "landscape"
|
|
side = "left", "right", "both", "bottom", "all"
|
|
thick = floor thickness
|
|
holetype = "hole", "slot"
|
|
*/
|
|
|
|
module hd_holes(hd=3.5, orientation="portrait", side="all", thick=2, holetype="slot") {
|
|
|
|
hd25_x = 100;
|
|
hd25_y = 69.85;
|
|
hd35_x = 147;
|
|
hd35_y = 101.6;
|
|
hd35_z = 26.1;
|
|
hole_size = 3.2;
|
|
hole_len = 3 * hole_size;
|
|
slot_size = [hole_size, hole_len, thick];
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(hd == 2.5) {
|
|
if(orientation == "portrait") {
|
|
translate([0,hd25_x,0]) rotate([0,0,270]) union() {
|
|
if(side == "left" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([9.4,-thick,3]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([86,-thick,3]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([9.4-(1.5*hole_size),-thick,3]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),-thick,3]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "right" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([9.4,hd25_y+thick,3]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([86,hd25_y+thick,3]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([9.4-(1.5*hole_size),hd25_y+thick,3]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),hd25_y+thick,3]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "bottom" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([9.4,4.07,0]) cylinder(d=hole_size,h=thick);
|
|
translate([86,4.07,0]) cylinder(d=hole_size,h=thick);
|
|
translate([86,65.79,0]) cylinder(d=hole_size,h=thick);
|
|
translate([9.4,65.79,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([9.4-(1.5*hole_size),4.07,0]) slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),4.07,0]) slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),65.79,0]) slot(hole_size, hole_len, thick);
|
|
translate([9.4-(1.5*hole_size),65.79,0]) slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
if(side == "left" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([9.4,-thick,3]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([86,-thick,3]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([9.4-(1.5*hole_size),-thick,3]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),-thick,3]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "right" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([9.4,hd25_y+thick,3]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([86,hd25_y+thick,3]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([9.4-(1.5*hole_size),hd25_y+thick,3]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),hd25_y+thick,3]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "bottom" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([9.4,4.07,-thick]) cylinder(d=hole_size,h=thick);
|
|
translate([86,4.07,-thick]) cylinder(d=hole_size,h=thick);
|
|
translate([86,65.79,-thick]) cylinder(d=hole_size,h=thick);
|
|
translate([9.4,65.79,-thick]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([9.4-(1.5*hole_size),4.07,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),4.07,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([86-(1.5*hole_size),65.79,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([9.4-(1.5*hole_size),65.79,-thick]) slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(hd == 3.5) {
|
|
if(orientation == "portrait") {
|
|
translate([0,hd35_x,0]) rotate([0,0,270]) union() {
|
|
if(side == "left" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([16.9,-thick,6.35]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([76.6,-thick,6.35]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([118.5,-thick,6.35]) rotate([270,0,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([16.9-(1.5*hole_size),-thick,6.35]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([76.6-(1.5*hole_size),-thick,6.35]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([118.5-(1.5*hole_size),-thick,6.35]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "right" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([118.5,hd35_y+thick,6.35]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([76.6,hd35_y+thick,6.35]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
translate([16.9,hd35_y+thick,6.35]) rotate([90,0,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([118.5-(1.5*hole_size),hd35_y+thick,6.35]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([76.6-(1.5*hole_size),hd35_y+thick,6.35]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([16.9-(1.5*hole_size),hd35_y+thick,6.35]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "bottom" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([29.52,3.18,0]) cylinder(d=hole_size,h=thick);
|
|
translate([61.27,3.18,0]) cylinder(d=hole_size,h=thick);
|
|
translate([105.72,3.18,0]) cylinder(d=hole_size,h=thick);
|
|
translate([29.52,98.43,0]) cylinder(d=hole_size,h=thick);
|
|
translate([61.27,98.43,0]) cylinder(d=hole_size,h=thick);
|
|
translate([105.72,98.43,0]) cylinder(d=hole_size,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([29.52-(1.5*hole_size),3.18,0]) slot(hole_size, hole_len, thick);
|
|
translate([61.27-(1.5*hole_size),3.18,0]) slot(hole_size, hole_len, thick);
|
|
translate([105.72-(1.5*hole_size),3.18,0]) slot(hole_size, hole_len, thick);
|
|
translate([29.52-(1.5*hole_size),98.43,0]) slot(hole_size, hole_len, thick);
|
|
translate([61.27-(1.5*hole_size),98.43,0]) slot(hole_size, hole_len, thick);
|
|
translate([105.72-(1.5*hole_size),98.43,0]) slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
if(side == "left" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([16.9,-thick,6.35]) rotate([270,0,0]) cylinder(d=3,h=thick);
|
|
translate([76.6,-thick,6.35]) rotate([270,0,0]) cylinder(d=3,h=thick);
|
|
translate([118.5,-thick,6.35]) rotate([270,0,0]) cylinder(d=3,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([16.9-(1.5*hole_size),-thick,6.35]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([76.6-(1.5*hole_size),-thick,6.35]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([118.5-(1.5*hole_size),-thick,6.35]) rotate([270,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "right" || side == "both" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([118.5,hd35_y+thick,6.35]) rotate([90,0,0]) cylinder(d=3,h=thick);
|
|
translate([76.6,hd35_y+thick,6.35]) rotate([90,0,0]) cylinder(d=3,h=thick);
|
|
translate([16.9,hd35_y+thick,6.35]) rotate([90,0,0]) cylinder(d=3,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([118.5-(1.5*hole_size),hd35_y+thick,6.35]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([76.6-(1.5*hole_size),hd35_y+thick,6.35]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
translate([16.9-(1.5*hole_size),hd35_y+thick,6.35]) rotate([90,0,0])
|
|
slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
if(side == "bottom" || side == "all") {
|
|
if(holetype == "hole") {
|
|
translate([29.52,3.18,-thick]) cylinder(d=3.6,h=thick);
|
|
translate([61.27,3.18,-thick]) cylinder(d=3.6,h=thick);
|
|
translate([105.72,3.18,-thick]) cylinder(d=3.6,h=thick);
|
|
translate([29.52,98.43,-thick]) cylinder(d=3.6,h=thick);
|
|
translate([61.27,98.43,-thick]) cylinder(d=3.6,h=thick);
|
|
translate([105.72,98.43,-thick]) cylinder(d=3.6,h=thick);
|
|
}
|
|
if(holetype == "slot") {
|
|
translate([29.52-(1.5*hole_size),3.18,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([61.27-(1.5*hole_size),3.18,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([105.72-(1.5*hole_size),3.18,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([29.52-(1.5*hole_size),98.43,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([61.27-(1.5*hole_size),98.43,-thick]) slot(hole_size, hole_len, thick);
|
|
translate([105.72-(1.5*hole_size),98.43,-thick]) slot(hole_size, hole_len, thick);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
NAME: hd_mount
|
|
DESCRIPTION: creates 2.5" and 3.5" hard drive mounts
|
|
TODO: none
|
|
|
|
USAGE: hd_mount(hd, orientation, position, side)
|
|
|
|
hd = 2.5, 3.5
|
|
orientation = "portrait", "landscape"
|
|
position = "vertical", "horizontal"
|
|
side = "left", "right"
|
|
*/
|
|
|
|
module hd_mount(hd, orientation, position, side) {
|
|
|
|
adj = .01;
|
|
$fn = 90;
|
|
|
|
if(hd == 2.5) {
|
|
if(orientation == "portrait") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([0,14,0]) rotate([0,0,0]) hd25_vtab("right");
|
|
translate([0,90.6,0]) rotate([0,0,0]) hd25_vtab("right");
|
|
}
|
|
else { // right
|
|
translate([0,14,0]) rotate([0,0,0]) hd25_vtab("left");
|
|
translate([0,90.6,0]) rotate([0,0,0]) hd25_vtab("left");
|
|
}
|
|
}
|
|
else {
|
|
translate([-.5,14,0]) hd25_tab("left");
|
|
translate([-.5,90.6,0]) hd25_tab("left");
|
|
translate([70.35,14,0]) hd25_tab("right");
|
|
translate([70.35,90.6,0]) hd25_tab("right");
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([9.4,0,0]) rotate([0,0,90]) hd25_vtab("right");
|
|
translate([86,0,0]) rotate([0,0,90]) hd25_vtab("right");
|
|
}
|
|
else { // right
|
|
translate([9.4,0,0]) rotate([0,0,90]) hd25_vtab("left");
|
|
translate([86,0,0]) rotate([0,0,90]) hd25_vtab("left");
|
|
}
|
|
}
|
|
else {
|
|
translate([9.4,4.07-4.5,0]) rotate([0,0,90]) hd25_tab("left");
|
|
translate([86,4.07-4.5,0]) rotate([0,0,90]) hd25_tab("left");
|
|
translate([86,65.79+4.5,0]) rotate([0,0,90]) hd25_tab("right");
|
|
translate([9.4,65.79+4.5,0]) rotate([0,0,90]) hd25_tab("right");
|
|
}
|
|
}
|
|
}
|
|
if(hd == 3.5) {
|
|
if(orientation == "portrait") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([0,41.28,0]) rotate([0,0,0]) hd35_vtab("right");
|
|
translate([0,41.28+44.45,0]) rotate([0,0,0]) hd35_vtab("right");
|
|
translate([0,41.28+76.20,0]) rotate([0,0,0]) hd35_vtab("right");
|
|
}
|
|
else { // right
|
|
translate([0,41.28,0]) rotate([0,0,0]) hd35_vtab("left");
|
|
translate([0,41.28+44.45,0]) rotate([0,0,0]) hd35_vtab("left");
|
|
translate([0,41.28+76.20,0]) rotate([0,0,0]) hd35_vtab("left");
|
|
}
|
|
}
|
|
else {
|
|
translate([-.5,28.5,0]) hd35_tab("left");
|
|
translate([-.5,69.75,0]) hd35_tab("left");
|
|
translate([-.5,130.1,0]) hd35_tab("left");
|
|
translate([101.6+.5,28.5,0]) hd35_tab("right");
|
|
translate([101.6+.5,69.75,0]) hd35_tab("right");
|
|
translate([101.6+.5,130.1,0]) hd35_tab("right");
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([9.4,0,0]) rotate([0,0,90]) hd35_vtab("right");
|
|
translate([86,0,0]) rotate([0,0,90]) hd35_vtab("right");
|
|
}
|
|
else { // right
|
|
translate([9.4,0,0]) rotate([0,0,90]) hd35_vtab("left");
|
|
translate([86,0,0]) rotate([0,0,90]) hd35_vtab("left");
|
|
}
|
|
}
|
|
else {
|
|
translate([16.9,-.5,0]) rotate([0,0,90]) hd35_tab("left");
|
|
translate([76.6,-.5,0]) rotate([0,0,90]) hd35_tab("left");
|
|
translate([118.5,-.5,0]) rotate([0,0,90]) hd35_tab("left");
|
|
translate([16.9,101.6-.5,0]) rotate([0,0,90]) hd35_tab("right");
|
|
translate([76.6,101.6-.5,0]) rotate([0,0,90]) hd35_tab("right");
|
|
translate([118.5,101.6-.5,0]) rotate([0,0,90]) hd35_tab("right");
|
|
}
|
|
}
|
|
}
|
|
} |