3104 lines
176 KiB
OpenSCAD
3104 lines
176 KiB
OpenSCAD
/*
|
|
SBC Case Builder Copyright 2022 Edward A. Kisiel hominoid@cablemi.com
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
Code released under GPLv3: http://www.gnu.org/licenses/gpl.html
|
|
|
|
20220202 Version 1.0.0 sbc case builder using sbc model framework.
|
|
20220206 Version 1.0.1 added tray-vu7 case style, other fixes.
|
|
20220212 Version 1.1.0 implemented sbc_case_builder.cfg config file,
|
|
sbc_case_builder_library.scad and basic accessory framework.
|
|
adjusted tray-vu7 tabs, adjusted tray-vu7 model alignment
|
|
minor fixes and other maintenance.
|
|
20220220 Version 1.1.1 added .cfg commands add1,add2,model,platter
|
|
schema changes, extended standoff fixes, hd mounting acc.
|
|
acc. placement and other minor fixes, added raise_top setting.
|
|
20220227 Version 1.1.2 added sbc_off setting, fixed hdmi bottom placement
|
|
schema change, extended standoff detection, hd vertical mount, oled holder
|
|
access port, access cover, case feet and other fixes.
|
|
20220306 Version 1.1.3 added netcard, buttons, parametric access_port, other fixes and maintenance
|
|
20220312 Version 1.2.0 added fillet array, button cutout style, hk_lcd35, other fixes and maintenance
|
|
20220320 Version 1.2.1 added hk_boom bonnet model and accessories, hk_uart model, fixed uart opening,
|
|
enabled pcb_z, added tabs and fixed tray case top, other fixes and maintenance
|
|
20220406 Version 1.2.2 added vu7c, vu8m and weatherboard2 models, other additions,
|
|
fixes and maintenance.
|
|
20220515 Version 1.2.3 added odroid-m1, jetson nano, rockpro64, completed mask(), improved docs
|
|
changed tray top design.
|
|
20221005 Version 2.0.0 full customizer user interface,case configuration file changed to json,
|
|
accessories kept in sbc_case_builder_accessories.cfg,
|
|
added round, hexagon, snap and fitted cases, setup additional sbc from
|
|
SBC_Model_Framework, added components and masks, added multi-associative
|
|
parametric positioning for accessories, added individual variable height
|
|
sbc standoffs, added cutaway view when case face is not movable, finished
|
|
indents for select components and orientations.
|
|
20221011 Version 2.0.1 adjusted cases and accessories, updated README.md and SBC_Case_Builder_Cases.gif
|
|
20221101 Version 2.0.2 updated sbc model framework, h3/h3+ model and rockpi5b adjustments
|
|
20221207 Version 2.0.3 added part view to facilitate individual part prints, updated sbc model framework,
|
|
added n2l and m1 cases
|
|
2023xxxx Version 2.0.x fixed standoff sidewall support misplacement on sbc move,
|
|
|
|
see https://github.com/hominoids/SBC_Case_Builder
|
|
*/
|
|
|
|
use <./SBC_Model_Framework/sbc_models.scad>;
|
|
use <./sbc_case_builder_library.scad>;
|
|
use <./lib/fillets.scad>;
|
|
include <./SBC_Model_Framework/sbc_models.cfg>;
|
|
include <./sbc_case_builder_accessories.cfg>;
|
|
|
|
/* [View] */
|
|
// viewing mode "model", "platter", "part"
|
|
view = "model"; // [model, platter, part]
|
|
individual_part = "bottom"; // [top, bottom, right, left, front, rear, accessories]
|
|
// sbc off in model view
|
|
sbc_off = false;
|
|
// enable highlight for sbc component subtarctive geometry
|
|
sbc_highlight = false;
|
|
// enable highlight for accessory subtarctive geometry
|
|
accessory_highlight = false;
|
|
// raises top mm in model view or < 0 = off
|
|
raise_top = 0; // [-1:100]
|
|
// lowers bottom mm in model view or < 0 = off
|
|
lower_bottom = 0; // [-1:100]
|
|
// move left side mm in model view or < 0 = off
|
|
move_leftside = 0; // [-1:100]
|
|
// move right side mm in model view or < 0 = off
|
|
move_rightside = 0; // [-1:100]
|
|
// move front mm in model view or < 0 = off
|
|
move_front = 0; // [-1:100]
|
|
// move rear mm in model view or < 0 = off
|
|
move_rear = 0; // [-1:100]
|
|
|
|
/* [Adjustments] */
|
|
// base case design
|
|
case_design = "shell"; // [shell,panel,stacked,tray,round,hex,snap,fitted]
|
|
// base case style
|
|
case_style = "none"; // ["none","vu5","vu7","sides"]
|
|
// single board computer model
|
|
sbc_model = "c1+"; // ["c1+", "c2", "c4", "xu4", "xu4q", "mc1", "hc1", "n1", "n2", "n2+", "n2+_noheatsink", "n2l", "n2lq", "m1", "m1_noheatsink", "h2", "h3", "hc4", "show2", "rpizero", "rpizero2w", "rpi1a+", "rpi1b+", "rpi3a+", "rpi3b", "rpi3b+", "rpi4b", "a64", "rock64", "rockpro64", "quartz64a", "quartz64b", "h64b", "atomicpi", "jetsonnano", "rockpi4b+", "rockpi4c", "rockpi4c+", "rockpi5b", "vim1", "vim2", "vim3", "vim3l", "vim4", "tinkerboard", "tinkerboard-s", "tinkerboard-2", "tinkerboard-r2", "opizero", "opizero2", "opir1plus_lts"]
|
|
// sbc location x axis
|
|
pcb_loc_x = 0; //[0:.5:300]
|
|
// sbc location y axis
|
|
pcb_loc_y = 0; //[0:.5:300]
|
|
// sbc location z axis
|
|
pcb_loc_z = 0; //[0:.25:100]
|
|
// additional x axis case size
|
|
case_offset_x = 0; //[0:.5:300]
|
|
// additional y axis case size
|
|
case_offset_y = 0; //[0:.5:300]
|
|
// additional z axis case top size
|
|
case_offset_tz = 0; //[0:.5:100]
|
|
// additional z axis case bottom size
|
|
case_offset_bz = 0; //[0:.5:100]
|
|
// case wall thickness
|
|
wallthick = 2; //[1:.5:5]
|
|
// case floor thickness
|
|
floorthick = 2; //[1:.5:5]
|
|
// case side thickness
|
|
sidethick = 2; //[1:.5:5]
|
|
// distance between pcb and case
|
|
gap = 1; //[.5:.5:5]
|
|
// corner fillets
|
|
c_fillet = 3; //[0:.5:9]
|
|
// edge fillets
|
|
fillet = 0; //[0:.5:6]
|
|
// tolerance for fitted surfaces
|
|
tol = .25; //[-.5:.0625:.5]
|
|
|
|
/* [Standoffs] */
|
|
// enable case top standoffs
|
|
sbc_top_standoffs = true;
|
|
// enable case bottom standoffs
|
|
sbc_bottom_standoffs = true;
|
|
// enable case extended standoffs
|
|
case_ext_standoffs = false;
|
|
// enable wall support for standoffs
|
|
sidewall_support = true;
|
|
|
|
// top case standoff - [diameter,height(not used),holesize,supportsize,supportheight,type(0=none, 1=countersink, 2=recessed, 3=nut holder, 4=blind),style(0=hex, 1=cylinder),reverse,insert,insert hole dia.,insert depth]
|
|
top_standoff = [5.75,18,2.5,10,4,4,0,1,0,4.5,5.1];
|
|
// case top - lower left standoff
|
|
top_rear_left = 0; //[-20:.25:20]
|
|
// case top - upper left standoff
|
|
top_front_left = 0; //[-20:.25:20]
|
|
// case top - lower right standoff
|
|
top_rear_right = 0; //[-20:.25:20]
|
|
// case top - upper right standoff
|
|
top_front_right = 0; //[-20:.25:20]
|
|
|
|
// bottom case standoff - [diameter,height(not used),holesize,supportsize,supportheight,type(0=none, 1=countersink, 2=recessed, 3=nut holder, 4=blind),style(0=hex, 1=cylinder),reverse,insert,insert hole dia.,insert depth]
|
|
bottom_standoff = [5.75,7,3.6,10,4,1,0,0,0,4.5,5.1];
|
|
// case bottom - rear left standoff
|
|
bottom_rear_left = 0; //[-20:.25:20]
|
|
// case bottom - upper left standoff
|
|
bottom_front_left = 0; //[-20:.25:20]
|
|
// case bottom - lower right standoff
|
|
bottom_rear_right = 0; //[-20:.25:20]
|
|
// case bottom - upper right standoff
|
|
bottom_front_right = 0; //[-20:.25:20]
|
|
|
|
// top case extened standoff - [diameter,height(not used),holesize,supportsize,supportheight,type(0=none, 1=countersink, 2=recessed, 3=nut holder, 4=blind),style(0=hex, 1=cylinder),reverse,insert,insert hole dia.,insert depth]
|
|
top_ext_standoff = [5.75,18,2.5,10,4,4,0,1,0,4.5,5.1];
|
|
|
|
// bottom case extended standoff - [diameter,height(not used),holesize,supportsize,supportheight,type(0=none, 1=countersink, 2=recessed, 3=nut holder, 4=blind),style(0=hex, 1=cylinder),reverse,insert,insert hole dia.,insert depth]
|
|
bottom_ext_standoff = [5.75,5,3.6,10,4,1,0,0,0,4.5,5.1];
|
|
|
|
/* [Features and Accessories] */
|
|
// enable indentations around io openings
|
|
indents = true;
|
|
// enable sata punchout
|
|
sata_punchout = false;
|
|
// gpio openings
|
|
gpio_opening = "none"; // [none,vent,open,punchout]
|
|
// cooling openings
|
|
cooling = "fan"; // [none,vents,fan,custom]
|
|
// exhaust vents
|
|
exhaust_vents = "vent"; // [none,vent]
|
|
// case accessory group to load
|
|
|
|
accessory_name = "none"; // ["none", "c1+_shell_boombox", "c1+_panel_boombox", "c1+_panel_lcd3.5", "c1+_desktop_lcd3.5", "c1+_deskboom_lcd3.5", "c1+_tray_boombox", "c1+_round", "c1+_hex", "c2_shell_boombox", "c2_panel_boombox", "c2_panel_lcd3.5", "c2_desktop_lcd3.5", "c2_deskboom_lcd3.5", "c2_tray_boombox", "c2_round", "c2_hex", "c4_shell_boombox", "c4_panel_lcd3.5", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_tray_boombox", "c4_round", "c4_hex", "xu4_keyhole", "hc4_tray_drivebox2.5", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "n1_round", "n1_hex", "n2l_tray", "n2l_gpio", "n2+_tray_vu7_fan", "m1_panel", "m1_tray", "m1_tray_ssd", "m1_tray_sides", "m1_tray_vu5", "m1_tray_vu7", "m1_fitted_drivebox2.5", "m1_fitted_drivebox3.5", "m1_fitted_pizzabox", "m1_fitted_drivebox3.5v", "h2_shell", "h2_shell_router", "h2_shell_router-ssd", "h2_lowboy", "h2_lowboy_router", "h2_tray", "h2_tray_sides", "h2_tray_router", "h2_router_station", "h2_round", "h2_hex", "h3_shell", "h3_lowboy", "h3_lowboy_router", "h3_tallboy", "h3_tallboy-ssd", "h3_ultimate", "h3_ultimate2", "h3_shell_drivebox2.5v", "jetsonnano_shell", "jetsonnano_panel", "jetsonnano_stacked", "jetsonnano_tray", "jetsonnano_tray_sides", "jetsonnano_round", "jetsonnano_hex", "jetsonnano_snap", "jetsonnano_fitted", "rock64_shell", "rock64_panel", "rock64_stacked", "rock64_tray", "rock64_tray_sides", "rock64_round", "rock64_hex", "rock64_snap", "rock64_fitted", "rockpro64_shell", "rockpro64_panel", "rockpro64_stacked", "rockpro64_tray", "rockpro64_tray_sides", "rockpro64_round", "rockpro64_hex", "rockpro64_snap", "rockpro64_fitted", "quartz64b_stacked_poe_hat", "show2_shell", "rpi1a+_shell", "rpi1a+_panel", "rpi1a+_stacked", "rpi1a+_tray", "rpi1a+_tray_sides", "rpi1a+_round", "rpi1a+_hex", "rpi1a+_snap", "rpi1a+_fitted", "rpi1b+_shell", "rpi1b+_panel", "rpi1b+_stacked", "rpi1b+_tray", "rpi1b+_tray_sides", "rpi1b+_round", "rpi1b+_hex", "rpi1b+_snap", "rpi1b+_fitted", "rpi3a+_shell", "rpi3a+_panel", "rpi3a+_stacked", "rpi3a+_tray", "rpi3a+_tray_sides", "rpi3a+_round", "rpi3a+_hex", "rpi3a+_snap", "rpi3a+_fitted", "rpi3b_shell", "rpi3b_panel", "rpi3b_stacked", "rpi3b_tray", "rpi3b_tray_sides", "rpi3b_round", "rpi3b_hex", "rpi3b_snap", "rpi3b_fitted", "rpi3b+_shell", "rpi3b+_panel", "rpi3b+_stacked", "rpi3b+_tray", "rpi3b+_tray_sides", "rpi3b+_round", "rpi3b+_hex", "rpi3b+_snap", "rpi3b+_fitted", "rpi4b_shell", "rpi4b_shell_geeekpi_poe_hat", "rpi4b_panel", "rpi4b_stacked", "rpi4b_tray", "rpi4b_tray_sides", "rpi4b_round", "rpi4b_hex", "rpi4b_snap", "rpi4b_fitted", "rockpi4b+_shell", "rockpi4b+_panel", "rockpi4b+_stacked", "rockpi4b+_tray", "rockpi4b+_tray_sides", "rockpi4b+_round", "rockpi4b+_hex", "rockpi4b+_snap", "rockpi4b+_fitted", "rockpi4c_shell", "rockpi4c_panel", "rockpi4c_stacked", "rockpi4c_tray", "rockpi4c_tray_sides", "rockpi4c_round", "rockpi4c_hex", "rockpi4c_snap", "rockpi4c_fitted", "rockpi4c+_shell", "rockpi4c+_panel", "rockpi4c+_stacked", "rockpi4c+_tray", "rockpi4c+_tray_sides", "rockpi4c+_round", "rockpi4c+_hex", "rockpi4c+_snap", "rockpi4c+_fitted", "rockpi5b", "vim1_shell", "vim1_panel", "vim1_stacked", "vim1_tray", "vim1_tray_sides", "vim1_round", "vim1_hex", "vim1_snap", "vim1_fitted", "vim2_shell", "vim2_panel", "vim2_stacked", "vim2_tray", "vim2_tray_sides", "vim2_round", "vim2_hex", "vim2_snap", "vim2_fitted", "vim3l_shell", "vim3l_panel", "vim3l_stacked", "vim3l_tray", "vim3l_tray_sides", "vim3l_round", "vim3l_hex", "vim3l_snap", "vim3l_fitted", "vim3_shell", "vim3_panel", "vim3_stacked", "vim3_tray", "vim3_tray_sides", "vim3_round", "vim3_hex", "vim3_snap", "vim3_fitted", "vim4_shell", "vim4_panel", "vim4_stacked", "vim4_tray", "vim4_tray_sides", "vim4_round", "vim4_hex", "vim4_snap", "vim4_fitted", "tinkerboard_shell", "tinkerboard_panel", "tinkerboard_stacked", "tinkerboard_tray", "tinkerboard_tray_sides", "tinkerboard_round", "tinkerboard_hex", "tinkerboard_snap", "tinkerboard_fitted", "tinkerboard-s_shell", "tinkerboard-s_panel", "tinkerboard-s_stacked", "tinkerboard-s_tray", "tinkerboard-s_tray_sides", "tinkerboard-s_round", "tinkerboard-s_hex", "tinkerboard-s_snap", "tinkerboard-s_fitted", "tinkerboard-2_shell", "tinkerboard-2_panel", "tinkerboard-2_stacked", "tinkerboard-2_tray", "tinkerboard-2_tray_sides", "tinkerboard-2_round", "tinkerboard-2_hex", "tinkerboard-2_snap", "tinkerboard-2_fitted", "tinkerboard-r2_shell", "tinkerboard-r2_panel", "tinkerboard-r2_stacked", "tinkerboard-r2_tray", "tinkerboard-r2_tray_sides", "tinkerboard-r2_round", "tinkerboard-r2_hex", "tinkerboard-r2_snap", "tinkerboard-r2_fitted", "hk_uart"]
|
|
|
|
a = search([accessory_name],accessory_data);
|
|
s = search([sbc_model],sbc_data);
|
|
|
|
pcb_width = sbc_data[s[0]][1];
|
|
pcb_depth = sbc_data[s[0]][2];
|
|
pcb_z = sbc_data[s[0]][3];
|
|
pcb_tmaxz = sbc_data[s[0]][5];
|
|
pcb_bmaxz = sbc_data[s[0]][6];
|
|
|
|
width = pcb_width+2*(wallthick+gap)+case_offset_x;
|
|
depth = pcb_depth+2*(wallthick+gap)+case_offset_y;
|
|
top_height = pcb_tmaxz+floorthick+case_offset_tz;
|
|
bottom_height = pcb_bmaxz+floorthick+case_offset_bz;
|
|
case_z = bottom_height+top_height;
|
|
case_diameter = sqrt(pow(width-wallthick-gap,2)+pow(depth-wallthick-gap,2));
|
|
hex_diameter = sqrt(pow(width+2*(wallthick+gap),2)+pow(depth+2*(wallthick+gap),2));
|
|
|
|
|
|
/* [Hidden] */
|
|
adjust = .01;
|
|
$fn=90;
|
|
case_fn = 360; // circle segments for round cases
|
|
case_ffn = 90; // circle segments for fillet of round cases
|
|
lip = 5;
|
|
vu_rotation = [15,0,0];
|
|
|
|
// platter view
|
|
if (view == "platter") {
|
|
if(case_design == "shell") {
|
|
case_bottom(case_design);
|
|
translate([0,(2*depth)+20,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "panel") {
|
|
case_bottom(case_design);
|
|
translate([0,(2*depth)+5,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
translate([width+25,0,-gap]) rotate([-90,0,0]) case_side(case_design,case_style,"rear");
|
|
translate([width+25,2*(case_z)+10,-depth+wallthick+gap+floorthick])
|
|
rotate([90,0,0]) case_side(case_design,case_style,"front");
|
|
translate([2.5*width,0,-width+(2*wallthick)+gap]) rotate([0,-90,-90])
|
|
case_side(case_design,case_style,"right");
|
|
translate([-20,0,-gap]) rotate([0,90,90])
|
|
case_side(case_design,case_style,"left");
|
|
}
|
|
if(case_design == "stacked") {
|
|
case_bottom(case_design);
|
|
translate([0,(2*depth)+20,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "tray") {
|
|
case_bottom(case_design);
|
|
translate([0,(2*depth)+10,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
if(case_style == "vu5" || case_style == "vu7" || case_style == "sides") {
|
|
translate([3*width,0,width]) rotate([0,90,90])
|
|
case_side(case_design,case_style,"right");
|
|
translate([width+15,0,2*sidethick]) rotate([0,-90,-90])
|
|
case_side(case_design,case_style,"left");
|
|
}
|
|
}
|
|
if(case_design == "round") {
|
|
case_bottom(case_design);
|
|
translate([width+30,depth,case_z-floorthick-gap]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "hex") {
|
|
case_bottom(case_design);
|
|
translate([2*width,depth,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "snap") {
|
|
case_bottom(case_design);
|
|
translate([0,(2*depth)+20,case_z+2*floorthick]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "fitted") {
|
|
case_bottom(case_design);
|
|
translate([0,(2*depth)+20,case_z+floorthick]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
// platter accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "platter" && type != "button_top") {
|
|
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if (class == "platter" && type == "button_top") {
|
|
translate([loc_x,loc_y,loc_z+1.25]) rotate([-90,0,0]) button_plunger(data_3, size_x, size_z);
|
|
translate([loc_x-20,loc_y-10,loc_z+3]) rotate([0,0,0]) button_top(data_3, size_x, size_z);
|
|
translate([loc_x-20,loc_y-20,loc_z]) rotate([0,0,0]) button_clip(data_3);
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "tray") {
|
|
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
|
}
|
|
else {
|
|
echo(width=width,depth=depth,top=top_height,bottom=bottom_height);
|
|
}
|
|
}
|
|
|
|
// model view
|
|
if (view == "model") {
|
|
// translate([(-width+(gap+wallthick))/2,(-depth+(gap+wallthick))/2,0]) rotate([0,0,0]){
|
|
if(case_design == "shell") {
|
|
if(lower_bottom >= 0) {
|
|
difference() {
|
|
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
|
if(move_rear < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,-lower_bottom])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_front < 0) {
|
|
translate([-gap-wallthick-1,depth-gap-wallthick-2.01,-lower_bottom])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_leftside < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,-lower_bottom])
|
|
cube([gap+wallthick+1.01,depth+2,case_z+2]);
|
|
}
|
|
if(move_rightside < 0) {
|
|
translate([width-gap-(2*wallthick)-adjust,-gap-wallthick-1,-lower_bottom])
|
|
cube([gap+wallthick,depth+2,case_z+2]);
|
|
}
|
|
}
|
|
}
|
|
if(sbc_off == false) {
|
|
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z]) sbc(sbc_model);
|
|
}
|
|
if(raise_top >= 0) {
|
|
difference() {
|
|
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
|
if(move_rear < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,raise_top])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_front < 0) {
|
|
translate([-gap-wallthick-1,depth-gap-wallthick-2.01,raise_top])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_leftside < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,raise_top])
|
|
cube([gap+wallthick+1.01,depth+2,case_z+2]);
|
|
}
|
|
if(move_rightside < 0) {
|
|
translate([width-gap-(2*wallthick)-adjust,-gap-wallthick-1,raise_top])
|
|
cube([gap+wallthick,depth+2,case_z+2]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "panel") {
|
|
if(lower_bottom >= 0) {
|
|
color("grey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
|
}
|
|
if(sbc_off == false) {
|
|
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z]) sbc(sbc_model);
|
|
}
|
|
if(raise_top >= 0) {
|
|
color("grey",1) translate([0,0,raise_top])case_top(case_design);
|
|
}
|
|
if(move_front >= 0) {
|
|
color("grey",1) translate([0,move_front,0]) case_side(case_design,case_style,"front");
|
|
}
|
|
if(move_rear >= 0) {
|
|
color("grey",1) translate([0,-move_rear,0]) case_side(case_design,case_style,"rear");
|
|
}
|
|
if(move_rightside >= 0) {
|
|
color("grey",1) translate([move_rightside,0,0]) case_side(case_design,case_style,"right");
|
|
}
|
|
if(move_leftside >= 0) {
|
|
color("grey",1) translate([-move_leftside,0,0]) case_side(case_design,case_style,"left");
|
|
}
|
|
}
|
|
if(case_design == "stacked") {
|
|
if(lower_bottom >= 0) {
|
|
color("grey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
|
}
|
|
if(sbc_off == false) {
|
|
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z]) sbc(sbc_model);
|
|
}
|
|
if(raise_top >= 0) {
|
|
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
|
}
|
|
}
|
|
if(case_design == "tray") {
|
|
if(lower_bottom >= 0) {
|
|
difference() {
|
|
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
|
if(move_rear < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,-lower_bottom])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_front < 0) {
|
|
translate([-gap-wallthick-1,depth-gap-wallthick-2.01,-lower_bottom])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_leftside < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,-lower_bottom])
|
|
cube([gap+wallthick+1.01,depth+2,case_z+2]);
|
|
}
|
|
if(move_rightside < 0) {
|
|
translate([width-gap-wallthick-2.01,-gap-wallthick-1,-lower_bottom])
|
|
cube([gap+wallthick+1,depth+2,case_z+2]);
|
|
}
|
|
}
|
|
}
|
|
if(sbc_off == false) {
|
|
translate([pcb_loc_x,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z]) sbc(sbc_model);
|
|
}
|
|
if(raise_top >= 0) {
|
|
difference() {
|
|
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
|
if(move_rear < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,raise_top])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_front < 0) {
|
|
translate([-gap-wallthick-1,depth-gap-wallthick-2.01,raise_top])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_leftside < 0) {
|
|
translate([-gap-2*wallthick-1,-gap-wallthick-1,raise_top])
|
|
cube([gap+wallthick+1.01,depth+2,case_z+2]);
|
|
}
|
|
if(move_rightside < 0) {
|
|
translate([width-gap-wallthick-2.01,-gap-wallthick-1,raise_top])
|
|
cube([gap+2*wallthick+1,depth+2,case_z+2]);
|
|
}
|
|
}
|
|
}
|
|
if(case_style == "sides" || case_style == "vu5" || case_style == "vu7") {
|
|
if(move_rightside >= 0) {
|
|
color("grey",1) translate([move_rightside,0,0]) case_side(case_design,case_style,"right");
|
|
}
|
|
if(move_leftside >= 0) {
|
|
color("grey",1) translate([-move_leftside,0,0]) case_side(case_design,case_style,"left");
|
|
}
|
|
}
|
|
if(case_style == "vu5") {
|
|
color("darkgrey",.5) translate([width+((127.5-width)/2)-6.5-wallthick-gap,
|
|
depth-1,case_z+15.5]) rotate([-vu_rotation[0],0,180])
|
|
import(file = "stl/Vu5a_Case.stl");
|
|
// right speaker and bracket
|
|
color("darkgrey",.5)
|
|
translate([((127.5-75)/2)+(width/2)-wallthick-gap+30.5,depth-1,
|
|
case_z+15]) rotate([90-vu_rotation[0],0,180])
|
|
import(file = "stl/Vu5_Speaker_Bracket_Left.stl");
|
|
color("darkgrey",.5) translate([((127.5-75)/2)+(width/2)-wallthick-gap+85,depth+15,
|
|
case_z+12.5]) rotate([-vu_rotation[0],0,180]) hk_speaker();
|
|
// left speaker and bracket
|
|
color("darkgrey",.5) translate([-((127.5-75)/2)+(width/2)-wallthick-gap-30.5,depth-1,
|
|
case_z+15]) rotate([90-vu_rotation[0],0,180])
|
|
import(file = "stl/Vu5_Speaker_Bracket_Right.stl");
|
|
color("darkgrey",.5) translate([-((127.5-75)/2)+(width/2)-wallthick-gap-40.5,depth+15,
|
|
case_z+12.5]) rotate([-vu_rotation[0],0,180]) hk_speaker();
|
|
}
|
|
if(case_style == "vu7") {
|
|
color("darkgrey",.5) translate([width+((192.90-width)/2)-wallthick-gap-20,
|
|
depth-1,case_z+15.5]) rotate([-vu_rotation[0],0,180])
|
|
import(file = "stl/Vu7a_Case.stl");
|
|
// right speaker and bracket
|
|
color("darkgrey",.5)
|
|
translate([((192.90-100)/2)+(width/2)-wallthick-gap+57.5,depth-4,
|
|
case_z+27]) rotate([90-vu_rotation[0],0,180])
|
|
import(file = "stl/Vu7_Speaker_Bracket_Left.stl");
|
|
color("darkgrey",.5) translate([((192.90-100)/2)+(width/2)-wallthick-gap+97,depth+11.5,
|
|
case_z+27]) rotate([-vu_rotation[0],0,180]) hk_speaker();
|
|
// left speaker and bracket
|
|
color("darkgrey",.5) translate([-((192.90-100)/2)+(width/2)-wallthick-gap-58,depth-4,
|
|
case_z+27]) rotate([90-vu_rotation[0],0,180])
|
|
import(file = "stl/Vu7_Speaker_Bracket_Right.stl");
|
|
color("darkgrey",.5) translate([-((192.90-100)/2)+(width/2)-wallthick-gap-53.5,depth+11.5,
|
|
case_z+27]) rotate([-vu_rotation[0],0,180]) hk_speaker();
|
|
}
|
|
}
|
|
if(case_design == "round" || case_design == "hex") {
|
|
if(lower_bottom >= 0) {
|
|
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
|
}
|
|
if(sbc_off == false) {
|
|
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z]) sbc(sbc_model);
|
|
}
|
|
if(raise_top >= 0) {
|
|
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
|
}
|
|
}
|
|
if(case_design == "snap" || case_design == "fitted") {
|
|
if(lower_bottom >= 0) {
|
|
difference() {
|
|
color("dimgrey",1) translate([0,0,-lower_bottom]) case_bottom(case_design);
|
|
if(move_rear < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,-lower_bottom])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_front < 0) {
|
|
translate([-gap-wallthick-1,depth-gap-wallthick-2.01,-lower_bottom])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_leftside < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,-lower_bottom])
|
|
cube([gap+wallthick+1.01,depth+2,case_z+2]);
|
|
}
|
|
if(move_rightside < 0) {
|
|
translate([width-gap-wallthick-2.01,-gap-wallthick-1,-lower_bottom])
|
|
cube([gap+wallthick+1,depth+2,case_z+2]);
|
|
}
|
|
}
|
|
}
|
|
if(sbc_off == false) {
|
|
translate([pcb_loc_x ,pcb_loc_y,bottom_height-pcb_z+pcb_loc_z]) sbc(sbc_model);
|
|
}
|
|
if(raise_top >= 0) {
|
|
difference() {
|
|
color("grey",1) translate([0,0,raise_top]) case_top(case_design);
|
|
if(move_rear < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,raise_top])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_front < 0) {
|
|
translate([-gap-wallthick-1,depth-gap-wallthick-2.01,raise_top])
|
|
cube([width+2,gap+wallthick+1.01,case_z+2]);
|
|
}
|
|
if(move_leftside < 0) {
|
|
translate([-gap-wallthick-1,-gap-wallthick-1,raise_top])
|
|
cube([gap+wallthick+1.01,depth+2,case_z+2]);
|
|
}
|
|
if(move_rightside < 0) {
|
|
translate([width-gap-wallthick-2.01,-gap-wallthick-1,raise_top])
|
|
cube([gap+wallthick+1,depth+2,case_z+2]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// model accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "model" && face == "top" && raise_top > -1) {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z+raise_top,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
if (class == "model"&& face != "top" ) {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "tray") {
|
|
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
|
}
|
|
else {
|
|
echo(width=width,depth=depth,top=top_height,bottom=bottom_height);
|
|
}
|
|
}
|
|
//}
|
|
// part
|
|
if (view == "part") {
|
|
if(individual_part == "top") {
|
|
if(case_design == "shell") {
|
|
translate([0,depth,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "panel") {
|
|
translate([0,depth,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "stacked") {
|
|
translate([0,depth,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "tray") {
|
|
translate([0,depth,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "round") {
|
|
translate([width+30,depth,case_z-floorthick-gap]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "hex") {
|
|
translate([2*width,depth,case_z]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "snap") {
|
|
translate([0,depth,case_z+2*floorthick]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
if(case_design == "fitted") {
|
|
translate([0,depth,case_z+floorthick]) rotate([180,0,0]) case_top(case_design);
|
|
}
|
|
}
|
|
if(individual_part == "bottom") {
|
|
case_bottom(case_design);
|
|
}
|
|
if(individual_part == "front") {
|
|
if(case_design == "panel") {
|
|
translate([0,case_z,-depth+wallthick+gap+floorthick])
|
|
rotate([90,0,0]) case_side(case_design,case_style,"front");
|
|
}
|
|
}
|
|
if(individual_part == "rear") {
|
|
if(case_design == "panel") {
|
|
translate([0,0,-gap]) rotate([-90,0,0]) case_side(case_design,case_style,"rear");
|
|
}
|
|
}
|
|
if(individual_part == "right") {
|
|
if(case_design == "panel") {
|
|
translate([gap,0,-width+(2*wallthick)+gap]) rotate([0,-90,-90])
|
|
case_side(case_design,case_style,"right");
|
|
}
|
|
if(case_design == "tray") {
|
|
if(case_style == "vu5" || case_style == "vu7" || case_style == "sides") {
|
|
translate([depth,0,width-gap]) rotate([0,90,90])
|
|
case_side(case_design,case_style,"right");
|
|
}
|
|
}
|
|
}
|
|
if(individual_part == "left") {
|
|
if(case_design == "panel") {
|
|
translate([depth,0,-gap]) rotate([0,90,90])
|
|
case_side(case_design,case_style,"left");
|
|
}
|
|
if(case_design == "tray") {
|
|
if(case_style == "vu5" || case_style == "vu7" || case_style == "sides") {
|
|
translate([gap,0,2*sidethick+gap]) rotate([0,-90,-90])
|
|
case_side(case_design,case_style,"left");
|
|
}
|
|
}
|
|
}
|
|
if(individual_part == "accessories") {
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "platter" && type != "button_top") {
|
|
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if (class == "platter" && type == "button_top") {
|
|
translate([loc_x,loc_y,loc_z+1.25]) rotate([-90,0,0]) button_plunger(data_3, size_x, size_z);
|
|
translate([loc_x-20,loc_y-10,loc_z+3]) rotate([0,0,0]) button_top(data_3, size_x, size_z);
|
|
translate([loc_x-20,loc_y-20,loc_z]) rotate([0,0,0]) button_clip(data_3);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "tray") {
|
|
echo(width=width+2*sidethick,depth=depth,top=top_height,bottom=bottom_height);
|
|
}
|
|
else {
|
|
echo(width=width,depth=depth,top=top_height,bottom=bottom_height);
|
|
}
|
|
}
|
|
|
|
|
|
// case bottom
|
|
module case_bottom(case_design) {
|
|
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
union() {
|
|
if(case_design == "shell") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,bottom_height/2])
|
|
cube_fillet_inside([width,depth,bottom_height],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0], bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
translate([(width/2)-wallthick-gap,
|
|
(depth/2)-wallthick-gap,(bottom_height/2)+floorthick])
|
|
cube_fillet_inside([width-(wallthick*2),depth-(wallthick*2),bottom_height],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[0,0,0,0], bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
}
|
|
}
|
|
if(case_design == "panel") {
|
|
union() {
|
|
translate([-gap,-gap,0])
|
|
cube([width-(2*wallthick),depth-(2*wallthick),floorthick]);
|
|
translate([(width*(1/5))-8-(wallthick+gap),depth-(2*wallthick)-gap-adjust,0])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
translate([width-(width*(1/5))-(wallthick+gap),depth-(2*wallthick)-gap-adjust,0])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
translate([(width*(1/5))-8-(wallthick+gap),-wallthick-gap+adjust,0])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
translate([width-(width*(1/5))-(wallthick+gap),-wallthick-gap+adjust,0])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
}
|
|
}
|
|
if(case_design == "stacked") {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,floorthick/2])
|
|
cube_fillet_inside([width-(2*wallthick),depth-(2*wallthick),floorthick],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
if(case_design == "tray") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,(bottom_height)/2])
|
|
cube_fillet_inside([width,depth,bottom_height],
|
|
vertical=[0,0,0,0], top=[0,0,0,0],
|
|
bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,(bottom_height/2)+floorthick])
|
|
cube_fillet_inside([width-(wallthick*2),depth-(wallthick*2),bottom_height+adjust],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[0,0,0,0],bottom=[2,2,2,2], $fn=90);
|
|
}
|
|
// right side nuts
|
|
translate([width-wallthick-gap-wallthick-4+adjust,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([90,0,90])
|
|
cylinder(d=10, h=4, $fn=6);
|
|
if(depth >= 75) {
|
|
translate([width-wallthick-gap-wallthick-4+adjust,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([90,0,90])
|
|
cylinder(d=10, h=4, $fn=6);
|
|
}
|
|
else {
|
|
|
|
translate([width-wallthick-gap-wallthick-4+adjust,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([90,0,90])
|
|
cylinder(d=10, h=4, $fn=6);
|
|
}
|
|
|
|
|
|
// left side nuts
|
|
translate([-adjust-gap,wallthick+gap+10,((bottom_height+floorthick)/2)-1])
|
|
rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
|
|
if(depth >= 75) {
|
|
translate([-adjust-gap,depth-wallthick-gap-10,((bottom_height+floorthick)/2)-1])
|
|
rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
|
|
}
|
|
else {
|
|
translate([-adjust-gap,wallthick+gap+40,((bottom_height+floorthick)/2)-1])
|
|
rotate([90,0,90]) cylinder(d=10, h=4, $fn=6);
|
|
}
|
|
// front panel
|
|
if(case_style == "sides" || case_style == "vu5" || case_style == "vu7") {
|
|
translate([-wallthick-gap,depth-(2*wallthick)-gap,bottom_height-adjust])
|
|
rotate([0,0,0]) cube([width,wallthick,top_height]);
|
|
}
|
|
else {
|
|
translate([-wallthick-gap,depth-(2*wallthick)-gap,bottom_height-adjust])
|
|
rotate([0,0,0]) cube([width,wallthick,top_height-floorthick]);
|
|
}
|
|
// rear panel
|
|
translate([-wallthick-gap,-wallthick-gap,bottom_height-adjust])
|
|
cube([width,wallthick,top_height-floorthick]);
|
|
|
|
}
|
|
if(case_design == "round") {
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=bottom_height, r=case_diameter/2,
|
|
top=0, bottom=fillet, $fn=case_fn, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,(bottom_height/2)+floorthick]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=bottom_height+adjust, r=(case_diameter/2)-lip/2,
|
|
top=0, bottom=fillet-1, $fn=case_fn, fillet_fn=case_ffn, center=true);
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-lip]) rotate([0,0,30])
|
|
cylinder(h=lip+adjust, r=(case_diameter/2)+1, $fn=case_fn);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-lip]) rotate([0,0,30])
|
|
cylinder(h=lip+2*adjust, r=(case_diameter/2)-lip/4, $fn=case_fn);
|
|
}
|
|
}
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,(bottom_height/2)+2*floorthick]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=bottom_height+adjust+floorthick+lip,
|
|
r=(case_diameter/2)-lip/2,top=0,bottom=fillet-1, $fn=case_fn,
|
|
fillet_fn=case_ffn, center=true);
|
|
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
|
|
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
|
|
sbc_model != "rpizero" && sbc_model != "rpizero2w") {
|
|
translate([-16,(depth/2)-150,-adjust])
|
|
cube([width+10,300,case_z-2*floorthick-2]);
|
|
translate([width-9,(depth/2)-62.5,bottom_height-2*adjust])
|
|
cube([20,110,top_height-2*floorthick-2]);
|
|
}
|
|
else {
|
|
translate([-width/2,0,-adjust])
|
|
cube([300,depth+100,case_z-2*floorthick-2]);
|
|
translate([(-width+50)/2,-50,bottom_height-2*adjust])
|
|
cube([width+50,50+adjust,top_height-2*floorthick-2]);
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "hex") {
|
|
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
|
|
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
|
|
sbc_model != "rpizero" && sbc_model != "rpizero2w") {
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=bottom_height, r=case_diameter/2,
|
|
top=0, bottom=fillet, $fn=6, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,(bottom_height/2)+floorthick]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=bottom_height+adjust,r=(case_diameter/2)-lip/2,top=0,
|
|
bottom=fillet-1,$fn=6,fillet_fn=case_ffn, center=true);
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-lip]) rotate([0,0,30])
|
|
cylinder(h=lip+adjust,r=(case_diameter/2)+1, $fn=6);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-lip]) rotate([0,0,30])
|
|
cylinder(h=lip+2*adjust,r=(case_diameter/2)-lip/4, $fn=6);
|
|
}
|
|
}
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,(bottom_height/2)+2*floorthick]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=bottom_height+adjust+floorthick+lip,
|
|
r=(case_diameter/2)-lip/2,top=0, bottom=fillet-1, $fn=6,
|
|
fillet_fn=case_ffn, center=true);
|
|
translate([-16,(depth/2)-150,-adjust])
|
|
cube([width+10,300,case_z-2*floorthick-2]);
|
|
translate([width-9,(depth/2)-62.5,bottom_height-2*adjust])
|
|
cube([20,110,top_height-2*floorthick-2]);
|
|
}
|
|
}
|
|
else {
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height/2]) rotate([0,0,0])
|
|
cylinder_fillet_inside(h=bottom_height, r=hex_diameter/2,
|
|
top=0, bottom=fillet, $fn=6, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,(bottom_height/2)+floorthick]) rotate([0,0,0])
|
|
cylinder_fillet_inside(h=bottom_height+adjust,r=(hex_diameter/2)-lip/2,top=0,
|
|
bottom=fillet-1,$fn=6,fillet_fn=case_ffn, center=true);
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-lip]) rotate([0,0,0])
|
|
cylinder(h=lip+adjust,r=(hex_diameter/2)+1, $fn=6);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-lip]) rotate([0,0,0])
|
|
cylinder(h=lip+2*adjust,r=(hex_diameter/2)-lip/4, $fn=6);
|
|
}
|
|
}
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,(bottom_height/2)+2*floorthick]) rotate([0,0,0])
|
|
cylinder_fillet_inside(h=bottom_height+adjust+floorthick+lip,
|
|
r=(hex_diameter/2)-lip/2,top=0, bottom=fillet-1, $fn=6,
|
|
fillet_fn=case_ffn, center=true);
|
|
translate([-width/2,0,-adjust])
|
|
cube([300,depth+100,case_z-2*floorthick-2]);
|
|
translate([(-width+50)/2,-50,bottom_height-2*adjust])
|
|
cube([width+50,50+adjust,top_height-2*floorthick-2]);
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "snap") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,(floorthick+case_z)/2])
|
|
cube_fillet_inside([width,depth,floorthick+case_z],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0], bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,floorthick+(floorthick+case_z)/2])
|
|
cube_fillet_inside([width-(wallthick*2),depth-(wallthick*2),case_z+floorthick],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[0,0,0,0], bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
// snap top indent
|
|
translate([-gap-wallthick+.75,(depth/2)-(depth*.75)/2-gap-wallthick,case_z-.5])
|
|
rotate([0,45,0]) cube([4,depth*.75,4]);
|
|
translate([width-wallthick-gap-6.25,(depth/2)-(depth*.75)/2-gap-wallthick,case_z-.5])
|
|
rotate([0,45,0]) cube([4,depth*.75,4]);
|
|
}
|
|
}
|
|
if(case_design == "fitted") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z/2])
|
|
cube_fillet_inside([width,depth,case_z],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0], bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
translate([(width/2)-wallthick-gap,
|
|
(depth/2)-wallthick-gap,(case_z/2)+floorthick])
|
|
cube_fillet_inside([width-(wallthick*2),depth-(wallthick*2),case_z],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[0,0,0,0], bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z-lip/2])
|
|
cube_fillet_inside([width+adjust,depth+adjust,lip+adjust],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0],bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z-lip/2])
|
|
cube_fillet_inside([width-wallthick,depth-wallthick,lip+adjust],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],top=[0,0,0,0],
|
|
bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
}
|
|
}
|
|
}
|
|
// additive accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if(class == "add1" && face == "bottom") {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// side attachment holes
|
|
if(case_design == "tray") {
|
|
// right side bottom attachment holes
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
if(depth >= 75) {
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
else {
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
|
|
// left side bottom attachment holes
|
|
translate([-wallthick-gap-adjust,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
if(depth >= 75) {
|
|
translate([-wallthick-gap-adjust-6,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
else {
|
|
translate([-wallthick-gap-adjust-6,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
// right side bottom nut inset
|
|
translate([width-3.5-(2*wallthick)-gap-.6,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
|
|
if(depth >= 75) {
|
|
translate([width-3.5-(2*wallthick)-gap-.6,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1])rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
|
|
}
|
|
else {
|
|
translate([width-3.5-(2*wallthick)-gap-.6,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1])rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
|
|
}
|
|
// left side bottom nut inset
|
|
translate([-gap+.6,wallthick+gap+10,((bottom_height+floorthick)/2)-1])
|
|
rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
|
|
if(depth >= 75) {
|
|
translate([-gap+.6,depth-wallthick-gap-10,((bottom_height+floorthick)/2)-1])
|
|
rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
|
|
}
|
|
else {
|
|
translate([-gap+.6,wallthick+gap+40,((bottom_height+floorthick)/2)-1])
|
|
rotate([90,0,90]) cylinder(d=6.6, h=3.5, $fn=6);
|
|
}
|
|
}
|
|
// pcb standoff holes
|
|
if(sbc_bottom_standoffs == true && bottom_standoff[5] != 4) {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if (pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
translate([pcb_hole_x,pcb_hole_y,-1]) cylinder(d=6.5, h=bottom_height);
|
|
}
|
|
}
|
|
}
|
|
// extended standoff holes
|
|
if(case_ext_standoffs == true) {
|
|
// right-rear standoff
|
|
if(width-pcb_loc_x-pcb_width >= 10 || pcb_loc_y >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2),(c_fillet/2),-1]) cylinder(d=6.5, h=bottom_height);
|
|
}
|
|
// right-front standoff
|
|
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10) || width-pcb_loc_x-pcb_width >= 10) {
|
|
translate([width-(c_fillet/2)-(2*(wallthick+gap)),
|
|
depth-(c_fillet/2)-(2*(wallthick+gap)),-1]) cylinder(d=6.5, h=bottom_height);
|
|
}
|
|
// left-rear standoff
|
|
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
|
|
translate([(c_fillet/2),(c_fillet/2),-1]) cylinder(d=6.5, h=bottom_height);
|
|
}
|
|
// left-front standoff
|
|
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
|
|
translate([(c_fillet/2),depth-(c_fillet/2)-(2*(wallthick+gap)),-1])
|
|
cylinder(d=6.5, h=bottom_height);
|
|
}
|
|
}
|
|
}
|
|
// pcb standoffs
|
|
if(sbc_bottom_standoffs == true) {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
if (i == 7) {
|
|
normal_standoff = [bottom_standoff[0],
|
|
bottom_height-pcb_z+pcb_loc_z+bottom_rear_left,
|
|
bottom_standoff[2],
|
|
bottom_standoff[3],
|
|
bottom_standoff[4],
|
|
bottom_standoff[5],
|
|
bottom_standoff[6],
|
|
bottom_standoff[7],
|
|
bottom_standoff[8],
|
|
bottom_standoff[9],
|
|
bottom_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,0]) standoff(normal_standoff);
|
|
}
|
|
if (i == 10) {
|
|
normal_standoff = [bottom_standoff[0],
|
|
bottom_height-pcb_z+pcb_loc_z+bottom_front_left,
|
|
bottom_standoff[2],
|
|
bottom_standoff[3],
|
|
bottom_standoff[4],
|
|
bottom_standoff[5],
|
|
bottom_standoff[6],
|
|
bottom_standoff[7],
|
|
bottom_standoff[8],
|
|
bottom_standoff[9],
|
|
bottom_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,0]) standoff(normal_standoff);
|
|
}
|
|
if (i == 13) {
|
|
normal_standoff = [bottom_standoff[0],
|
|
bottom_height-pcb_z+pcb_loc_z+bottom_rear_right,
|
|
bottom_standoff[2],
|
|
bottom_standoff[3],
|
|
bottom_standoff[4],
|
|
bottom_standoff[5],
|
|
bottom_standoff[6],
|
|
bottom_standoff[7],
|
|
bottom_standoff[8],
|
|
bottom_standoff[9],
|
|
bottom_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,0]) standoff(normal_standoff);
|
|
}
|
|
if (i == 16) {
|
|
normal_standoff = [bottom_standoff[0],
|
|
bottom_height-pcb_z+pcb_loc_z+bottom_front_right,
|
|
bottom_standoff[2],
|
|
bottom_standoff[3],
|
|
bottom_standoff[4],
|
|
bottom_standoff[5],
|
|
bottom_standoff[6],
|
|
bottom_standoff[7],
|
|
bottom_standoff[8],
|
|
bottom_standoff[9],
|
|
bottom_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,0]) standoff(normal_standoff);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// extended standoffs
|
|
if(case_ext_standoffs == true) {
|
|
// right-rear standoff
|
|
if(width-pcb_loc_x-pcb_width >= 10 || pcb_loc_y >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2),(c_fillet/2),0]) standoff(bottom_ext_standoff);
|
|
}
|
|
// right-front standoff
|
|
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10) || width-pcb_loc_x-pcb_width >= 10) {
|
|
translate([width-(c_fillet/2)-(2*(wallthick+gap)),
|
|
depth-(c_fillet/2)-(2*(wallthick+gap)),0]) standoff(bottom_ext_standoff);
|
|
}
|
|
// left-rear standoff
|
|
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
|
|
translate([(c_fillet/2),(c_fillet/2),0]) standoff(bottom_ext_standoff);
|
|
}
|
|
// left-front standoff
|
|
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
|
|
translate([(c_fillet/2),depth-(c_fillet/2)-(2*(wallthick+gap)),0])
|
|
standoff(bottom_ext_standoff);
|
|
}
|
|
}
|
|
// standoff sidewall support
|
|
if(sidewall_support == true && sbc_bottom_standoffs == true) {
|
|
if(pcb_width/pcb_depth >= 1.4) {
|
|
for(i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
if(i == 7) {
|
|
translate([pcb_hole_x-1, pcb_hole_y-(bottom_standoff[0]/2)-(gap+adjust)-1,0])
|
|
cube([2,gap+1.6,bottom_height-pcb_z+pcb_loc_z+bottom_rear_left]);
|
|
}
|
|
if(i == 10) {
|
|
translate([pcb_hole_x-1, pcb_hole_y+(bottom_standoff[0]/2)-.6+adjust,0])
|
|
cube([2,gap+1.6,bottom_height-pcb_z+pcb_loc_z+bottom_front_left]);
|
|
}
|
|
if(i == 13) {
|
|
translate([pcb_hole_x-1, pcb_hole_y-(bottom_standoff[0]/2)-(gap+adjust)-1,0])
|
|
cube([2,gap+1.6,bottom_height-pcb_z+pcb_loc_z+bottom_rear_right]);
|
|
}
|
|
if(i == 16) {
|
|
translate([pcb_hole_x-1, pcb_hole_y+(bottom_standoff[0]/2)-.6+adjust,0])
|
|
cube([2,gap+1.6,bottom_height-pcb_z+pcb_loc_z+bottom_front_right]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
if(i == 7) {
|
|
translate([pcb_hole_x-(bottom_standoff[0]/2)-2.6+adjust, pcb_hole_y-gap,0])
|
|
cube([gap+1.6,2,bottom_height-pcb_z+pcb_loc_z+bottom_rear_left]);
|
|
}
|
|
if(i == 10) {
|
|
translate([pcb_hole_x-(bottom_standoff[0]/2)-2.6+adjust, pcb_hole_y-gap,0])
|
|
cube([gap+1.6,2,bottom_height-pcb_z+pcb_loc_z+bottom_front_left]);
|
|
}
|
|
if (i == 13) {
|
|
translate([pcb_hole_x+(bottom_standoff[0]/2)-.5+adjust, pcb_hole_y-gap,0])
|
|
cube([gap+1.5,2,bottom_height-pcb_z+pcb_loc_z+bottom_rear_right]);
|
|
}
|
|
if (i == 16) {
|
|
translate([pcb_hole_x+(bottom_standoff[0]/2)-.5+adjust, pcb_hole_y-gap,0])
|
|
cube([gap+1.5,2,bottom_height-pcb_z+pcb_loc_z+bottom_front_right]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// extended standoff sidewall support
|
|
if(case_ext_standoffs == true && sidewall_support == true) {
|
|
// right-rear standoff
|
|
if(width-pcb_loc_x-pcb_width >= 10 || pcb_loc_y >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2)+(bottom_ext_standoff[0]/2)-.5,
|
|
(c_fillet/2)-1,0]) cube([gap+adjust+2,2,bottom_ext_standoff[1]]);
|
|
}
|
|
// right-front standoff
|
|
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10)
|
|
|| width-pcb_loc_x-pcb_width >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2)+(bottom_ext_standoff[0]/2)-.5,
|
|
depth-(c_fillet/2)-(2*(wallthick+gap))-1,0])
|
|
cube([gap+adjust+2,2,bottom_ext_standoff[1]]);
|
|
}
|
|
// left-rear standoff
|
|
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
|
|
translate([(c_fillet/2)-(wallthick+gap)-(bottom_ext_standoff[0]/2)+.6,
|
|
(c_fillet/2)-1,0]) cube([gap+adjust+2,2,bottom_ext_standoff[1]]);
|
|
}
|
|
// left-front standoff
|
|
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
|
|
translate([(c_fillet/2)-(wallthick+gap)-(bottom_ext_standoff[0]/2)+.6,
|
|
depth-(c_fillet/2)-(2*(wallthick+gap))-1,0])
|
|
cube([gap+adjust+2,2,bottom_ext_standoff[1]]);
|
|
}
|
|
}
|
|
}
|
|
// subtractive accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if ((class == "sub" && face == "bottom") || class == "suball") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
|
|
}
|
|
}
|
|
// create openings for additive
|
|
if (class == "add2" && face == "bottom" && type == "standoff") {
|
|
parametric_move_sub("round",loc_x,loc_y,-.1,face,rotation,parametric,
|
|
6.5,size_y,floorthick+1,data_1,data_2,data_3,data_4);
|
|
}
|
|
if ((class == "add1" || class == "add2") && type == "uart_holder") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub("microusb",loc_x+5.25,loc_y-5,loc_z+4,face,rotation,parametric,
|
|
0,0,0,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub("microusb",loc_x+5.25,loc_y-5,loc_z+4,face,rotation,parametric,
|
|
0,0,0,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "hc4_oled_holder") {
|
|
parametric_move_sub("rectangle",loc_x+1,loc_y+1.75,loc_z+25.5,face,rotation,parametric,
|
|
26.5,wallthick+gap+4,15,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "access_port") {
|
|
if(data_3 == "landscape") {
|
|
parametric_move_sub("rectangle",loc_x+6,loc_y-.5,loc_z-adjust,face,rotation,
|
|
parametric,size_x-17,size_y-1,floorthick+1,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
parametric_move_sub("rectangle",loc_x+size_x-12.5,loc_y+(size_y/2)-6,loc_z-adjust,face,rotation,
|
|
parametric,5.5,10.5,floorthick+.12,data_1,data_2,data_3,[5.5,5.5,5.5,5.5]);
|
|
}
|
|
else {
|
|
parametric_move_sub("rectangle",loc_x+.5,loc_y+5.75,loc_z-adjust,face,rotation,
|
|
parametric,size_x-1,size_y-17,floorthick+1,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
parametric_move_sub("rectangle",loc_x+(size_x/2)-5,loc_y+size_y-12.5,loc_z-adjust,face,rotation,
|
|
parametric,10.5,5.5,floorthick+.12,data_1,data_2,data_3,[5.5,5.5,5.5,5.5]);
|
|
}
|
|
}
|
|
if ((class == "model") && face == "bottom" && type == "h2_netcard") {
|
|
parametric_move_sub("rectangle",loc_x+25,loc_y-6,loc_z-14,face,rotation,
|
|
parametric,68.5,wallthick+3,14.5,data_1,data_2,data_3,[1,1,1,1]);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "button") {
|
|
if(data_3 == "recess") {
|
|
#parametric_move_sub("sphere",loc_x,loc_y,loc_z,face,rotation,
|
|
parametric,size_x-1,size_y,size_z,data_1,data_2,data_3,0);
|
|
}
|
|
if(data_3 == "cutout") {
|
|
parametric_move_sub("rectangle",loc_x+10,loc_y+4,loc_z-adjust,face,rotation,
|
|
parametric,size_x+2,size_y+1,size_z+2*adjust,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// sbc openings
|
|
if(sbc_highlight == true) {
|
|
#open_io();
|
|
}
|
|
else {
|
|
open_io();
|
|
}
|
|
// clean fillets
|
|
if(case_design == "shell") {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,bottom_height/2])
|
|
cube_negative_fillet([width,depth,bottom_height], radius=-1,
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet], top=[0,0,0,0],
|
|
bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
}
|
|
}
|
|
// additive accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if(class == "add2" && face == "bottom") {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// case top
|
|
module case_top(case_design) {
|
|
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
union() {
|
|
if(case_design == "shell") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,
|
|
(depth/2)-wallthick-gap,bottom_height+(top_height/2)])
|
|
cube_fillet_inside([width,depth,top_height],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[fillet,fillet,fillet,fillet,fillet],
|
|
bottom=[0,0,0,0], $fn=90);
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,
|
|
bottom_height+(top_height/2)-floorthick])
|
|
cube_fillet_inside([width-(wallthick*2),depth-(wallthick*2),top_height],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[fillet,fillet,fillet,fillet,fillet],
|
|
bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
}
|
|
if(case_design == "panel") {
|
|
union() {
|
|
translate([-gap,-gap,case_z-floorthick])
|
|
cube([width-(2*wallthick),depth-(2*wallthick),floorthick]);
|
|
translate([(width*(1/5))-8-(wallthick+gap),depth-(2*wallthick)-gap-adjust,
|
|
case_z-floorthick])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
translate([width-(width*(1/5))-(wallthick+gap),depth-(2*wallthick)-gap-adjust,
|
|
case_z-floorthick])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
translate([(width*(1/5))-8-(wallthick+gap),-wallthick-gap+adjust,
|
|
case_z-floorthick])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
translate([width-(width*(1/5))-(wallthick+gap),-wallthick-gap+adjust,
|
|
case_z-floorthick])
|
|
cube([8,wallthick+2*adjust,floorthick]);
|
|
}
|
|
}
|
|
if(case_design == "stacked") {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,
|
|
case_z-(floorthick/2)])
|
|
cube_fillet_inside([width-(2*wallthick),depth-(2*wallthick),floorthick],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
if(case_design == "tray" && (case_style == "vu5" || case_style == "vu7" || case_style == "sides")) {
|
|
translate([-wallthick-gap+.5,-wallthick-gap,case_z])
|
|
cube([width-1,depth,floorthick]);
|
|
translate([-wallthick-gap+.5,-wallthick-gap,
|
|
case_z-floorthick+adjust]) cube([width-1,wallthick,wallthick]);
|
|
}
|
|
if(case_design == "tray" && case_style == "none") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z/2])
|
|
cube_fillet_inside([width+2*wallthick+1,depth,case_z],
|
|
vertical=[0,0,0,0], top=[0,fillet,0,fillet,fillet],
|
|
bottom=[0,0,0,0], $fn=90);
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,(case_z/2)-floorthick+.25])
|
|
cube_fillet_inside([width+1,depth+(wallthick*2),case_z],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[0,0,0,0],bottom=[0,0,0,0], $fn=90);
|
|
// right side bottom attachment holes
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
if(depth >= 75) {
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
else {
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
// left side bottom attachment holes
|
|
translate([-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
if(depth >= 75) {
|
|
translate([-wallthick-gap-adjust-6,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
else {
|
|
translate([-wallthick-gap-adjust-6,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "round") {
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height+(top_height/2)-lip/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=top_height+lip, r=case_diameter/2,
|
|
top=fillet, bottom=0, $fn=case_fn, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height+(top_height/2)-floorthick-lip/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=top_height+lip, r=(case_diameter/2)-wallthick,
|
|
top=fillet-1, bottom=0, $fn=case_fn, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-adjust-lip/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=lip+2*adjust, r=(case_diameter/2)-wallthick/2+tol/2,
|
|
top=fillet-1, bottom=0, $fn=case_fn, fillet_fn=case_ffn, center=true);
|
|
// io cutout
|
|
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
|
|
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
|
|
sbc_model != "rpizero" && sbc_model != "rpizero2w") {
|
|
translate([width,(depth/2)-wallthick-gap,bottom_height-lip+top_height/2-floorthick])
|
|
cube_fillet_inside([18,depth-2*(wallthick+gap)-1,top_height+lip+2],
|
|
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
else {
|
|
translate([(width/2)-wallthick-gap,-20,bottom_height-lip+top_height/2-floorthick])
|
|
cube_fillet_inside([width-2*(wallthick+gap)-1,40,top_height+lip+2],
|
|
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
}
|
|
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
|
|
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
|
|
sbc_model != "rpizero" && sbc_model != "rpizero2w") {
|
|
translate([width-2*wallthick-gap-.95,depth/2-wallthick-gap-(depth-2*(floorthick+gap))/2,
|
|
bottom_height]) cube([wallthick-adjust,depth-2*(floorthick+gap),top_height+adjust]);
|
|
}
|
|
else {
|
|
translate([-.95,depth/2-2*wallthick-gap-(depth-2*(floorthick+gap))/2,
|
|
bottom_height]) cube([width-2*(floorthick+gap),wallthick-adjust,top_height+adjust]);
|
|
}
|
|
}
|
|
if(case_design == "hex") {
|
|
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
|
|
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
|
|
sbc_model != "rpizero" && sbc_model != "rpizero2w") {
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height+(top_height/2)-lip/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=top_height+lip, r=case_diameter/2,
|
|
top=fillet, bottom=0, $fn=6, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height+(top_height/2)-floorthick-lip/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=top_height+lip, r=(case_diameter/2)-wallthick,
|
|
top=fillet-1, bottom=0, $fn=6, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-adjust-lip/2]) rotate([0,0,30])
|
|
cylinder_fillet_inside(h=lip+2*adjust, r=(case_diameter/2)-wallthick/2+tol/2,
|
|
top=fillet-1, bottom=0, $fn=6, fillet_fn=case_ffn, center=true);
|
|
// io cutout
|
|
translate([width,(depth/2)-wallthick-gap,bottom_height-lip+top_height/2-floorthick])
|
|
cube_fillet_inside([18,depth-2*(wallthick+gap)-1,top_height+lip+2],
|
|
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
}
|
|
else {
|
|
difference() {
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height+(top_height/2)-lip/2]) rotate([0,0,0])
|
|
cylinder_fillet_inside(h=top_height+lip, r=hex_diameter/2,
|
|
top=fillet, bottom=0, $fn=6, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height+(top_height/2)-floorthick-lip/2])
|
|
rotate([0,0,0]) cylinder_fillet_inside(h=top_height+lip, r=(hex_diameter/2)-wallthick,
|
|
top=fillet-1, bottom=0, $fn=6, fillet_fn=case_ffn, center=true);
|
|
translate([pcb_width/2,pcb_depth/2,bottom_height-adjust-lip/2]) rotate([0,0,0])
|
|
cylinder_fillet_inside(h=lip+2*adjust, r=(hex_diameter/2)-wallthick/2+tol/2,
|
|
top=fillet-1, bottom=0, $fn=6, fillet_fn=case_ffn, center=true);
|
|
// io cutout
|
|
translate([(width/2)-wallthick-gap,-23,bottom_height-lip+top_height/2-floorthick])
|
|
cube_fillet_inside([width-2*(wallthick+gap),40,top_height+lip+2],
|
|
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
}
|
|
if(width/depth >= 1.4 && sbc_model != "vim1" && sbc_model != "vim2" &&
|
|
sbc_model != "vim3l" && sbc_model != "vim3" && sbc_model != "vim4" &&
|
|
sbc_model != "rpizero" && sbc_model != "rpizero2w") {
|
|
translate([width-2*wallthick-gap-.95,depth/2-wallthick-gap-(depth-2*(floorthick+gap))/2,
|
|
bottom_height]) cube([wallthick-adjust,depth-2*(floorthick+gap),top_height+adjust]);
|
|
}
|
|
else {
|
|
translate([0,depth/2-2.25*(wallthick+gap)-(depth-2*(floorthick+gap))/2,
|
|
bottom_height]) cube([width-2*(floorthick+gap),wallthick-adjust,top_height+adjust]);
|
|
}
|
|
}
|
|
if(case_design == "snap") {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,floorthick*1.5+case_z])
|
|
cube_fillet_inside([width,depth,floorthick],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0],bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z-adjust])
|
|
cube_fillet_inside([width-2*wallthick-tol,depth-2*wallthick-tol,2*floorthick+1.5],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[0,0,0,0],bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z-adjust])
|
|
cube_fillet_inside([width-(3*wallthick),depth-(3*wallthick),2*floorthick+1.5+adjust],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],top=[0,0,0,0],
|
|
bottom=[fillet,fillet,fillet,fillet,fillet], $fn=90);
|
|
}
|
|
// snap top outdent
|
|
difference() {
|
|
translate([-1.90+tol,(depth/2)-((depth*.75)/2)+2.5-gap-wallthick,case_z-.5])
|
|
rotate([0,45,0]) cube([4,(depth*.75)-5,4]);
|
|
translate([-.75,(depth/2)-((depth*.75)/2)+1.25-gap-wallthick,case_z+floorthick-5.75])
|
|
rotate([0,0,0]) cube([6,(depth*.75)-2,6]);
|
|
}
|
|
difference() {
|
|
translate([width-wallthick-gap-6.8-tol,(depth/2)-((depth*.75)/2)+2.5-gap-wallthick,case_z-.5])
|
|
rotate([0,45,0]) cube([4,(depth*.75)-5,4]);
|
|
translate([width-wallthick-gap-8.5,(depth/2)-((depth*.75)/2)+1.25-gap-wallthick,case_z+floorthick-5.75])
|
|
rotate([0,0,0]) cube([6,(depth*.75)-2,6]);
|
|
}
|
|
}
|
|
if(case_design == "fitted") {
|
|
difference() {
|
|
translate([(width/2)-wallthick-gap,
|
|
(depth/2)-wallthick-gap,case_z+floorthick/2-(lip)/2])
|
|
cube_fillet_inside([width,depth,lip+floorthick],
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[fillet,fillet,fillet,fillet,fillet],
|
|
bottom=[0,0,0,0], $fn=90);
|
|
translate([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,case_z-floorthick-1])
|
|
cube_fillet_inside([width-wallthick+tol,depth-wallthick+tol,lip+floorthick],
|
|
vertical=[c_fillet-1,c_fillet-1,c_fillet-1,c_fillet-1],
|
|
top=[fillet,fillet,fillet,fillet,fillet],
|
|
bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
}
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "add1" && face == "top") {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,
|
|
parametric,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// pcb standoff holes
|
|
if(top_standoff[5] != 4 && sbc_top_standoffs == true) {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if (pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
translate([pcb_hole_x,pcb_hole_y,top_height+1]) cylinder(d=6.5, h=top_height);
|
|
}
|
|
}
|
|
}
|
|
// extended standoff holes
|
|
if(case_ext_standoffs == true) {
|
|
// right-rear standoff
|
|
if(width-pcb_loc_x-pcb_width >= 10 || pcb_loc_y >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2),(c_fillet/2),top_height+1])
|
|
cylinder(d=6.5, h=top_height);
|
|
}
|
|
// right-front standoff
|
|
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10) || width-pcb_loc_x-pcb_width >= 10) {
|
|
translate([width-(c_fillet/2)-(2*(wallthick+gap)),
|
|
depth-(c_fillet/2)-(2*(wallthick+gap)),top_height+1]) cylinder(d=6.5, h=top_height);
|
|
}
|
|
// left-rear standoff
|
|
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
|
|
translate([(c_fillet/2),(c_fillet/2),top_height+1]) cylinder(d=6.5, h=top_height);
|
|
}
|
|
// left-front standoff
|
|
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
|
|
translate([+(c_fillet/2),depth-(c_fillet/2)-(2*(wallthick+gap)),
|
|
top_height+1]) cylinder(d=6.5, h=top_height+1);
|
|
}
|
|
}
|
|
}
|
|
// pcb standoffs
|
|
if(sbc_top_standoffs == true) {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
if (i == 7) {
|
|
normal_standoff = [top_standoff[0],
|
|
top_height+pcb_loc_z+top_rear_left,
|
|
top_standoff[2],
|
|
top_standoff[3],
|
|
top_standoff[4],
|
|
top_standoff[5],
|
|
top_standoff[6],
|
|
top_standoff[7],
|
|
top_standoff[8],
|
|
top_standoff[9],
|
|
top_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,case_z]) standoff(normal_standoff);
|
|
}
|
|
if (i == 10) {
|
|
normal_standoff = [top_standoff[0],
|
|
top_height+pcb_loc_z+top_front_left,
|
|
top_standoff[2],
|
|
top_standoff[3],
|
|
top_standoff[4],
|
|
top_standoff[5],
|
|
top_standoff[6],
|
|
top_standoff[7],
|
|
top_standoff[8],
|
|
top_standoff[9],
|
|
top_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,case_z]) standoff(normal_standoff);
|
|
}
|
|
if (i == 13) {
|
|
normal_standoff = [top_standoff[0],
|
|
top_height+pcb_loc_z+top_rear_right,
|
|
top_standoff[2],
|
|
top_standoff[3],
|
|
top_standoff[4],
|
|
top_standoff[5],
|
|
top_standoff[6],
|
|
top_standoff[7],
|
|
top_standoff[8],
|
|
top_standoff[9],
|
|
top_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,case_z]) standoff(normal_standoff);
|
|
}
|
|
if (i == 16) {
|
|
normal_standoff = [top_standoff[0],
|
|
top_height+pcb_loc_z+top_front_right,
|
|
top_standoff[2],
|
|
top_standoff[3],
|
|
top_standoff[4],
|
|
top_standoff[5],
|
|
top_standoff[6],
|
|
top_standoff[7],
|
|
top_standoff[8],
|
|
top_standoff[9],
|
|
top_standoff[10]];
|
|
translate([pcb_hole_x,pcb_hole_y,case_z]) standoff(normal_standoff);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// extended standoffs
|
|
if(case_ext_standoffs == true) {
|
|
// right-rear standoff
|
|
if(width-pcb_loc_x-pcb_width >= 10 || pcb_loc_y >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2),(c_fillet/2),case_z])
|
|
standoff(top_ext_standoff);
|
|
}
|
|
// right-front standoff
|
|
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10)
|
|
|| width-pcb_loc_x-pcb_width >= 10) {
|
|
translate([width-(c_fillet/2)-(2*(wallthick+gap)),
|
|
depth-(c_fillet/2)-(2*(wallthick+gap)),case_z]) standoff(top_ext_standoff);
|
|
}
|
|
// left-rear standoff
|
|
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
|
|
translate([(c_fillet/2),(c_fillet/2),case_z]) standoff(top_ext_standoff);
|
|
}
|
|
// left-front standoff
|
|
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
|
|
translate([(c_fillet/2),depth-(c_fillet/2)-(2*(wallthick+gap)),
|
|
case_z]) standoff(top_ext_standoff);
|
|
}
|
|
}
|
|
// standoff sidewall support
|
|
if(sidewall_support == true && sbc_top_standoffs == true) {
|
|
if(pcb_width/pcb_depth >= 1.4) {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
if (i == 7) {
|
|
translate([pcb_hole_x-1, pcb_hole_y-(top_standoff[0]/2)-(gap-adjust)-1.4,
|
|
case_z-top_height-top_rear_left]) cube([2,gap+1.6,top_height+top_rear_left]);
|
|
}
|
|
if (i == 10) {
|
|
translate([pcb_hole_x-1, pcb_hole_y+(top_standoff[0]/2)-.6+adjust,case_z-top_height-top_front_left])
|
|
cube([2,gap+1.6,top_height+top_front_left]);
|
|
}
|
|
if (i == 13) {
|
|
translate([pcb_hole_x-1, pcb_hole_y-(top_standoff[0]/2)-(gap-adjust)-1.4,
|
|
case_z-top_height-top_rear_right]) cube([2,gap+1.6,top_height+top_rear_right]);
|
|
}
|
|
if (i == 16) {
|
|
translate([pcb_hole_x-1, pcb_hole_y+(top_standoff[0]/2)-.6+adjust,case_z-top_height-top_front_right])
|
|
cube([2,gap+1.6,top_height+top_front_right]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
for (i=[7:3:16]) {
|
|
pcb_hole_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
pcb_hole_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
pcb_hole_size = sbc_data[s[0]][i+2];
|
|
if(pcb_hole_x!=0 && pcb_hole_y!=0) {
|
|
if (i == 7) {
|
|
translate([pcb_hole_x-(top_standoff[0]/2)-gap-adjust-.45,pcb_hole_y-1,
|
|
bottom_height-top_rear_left]) cube([gap+adjust+1,2,top_height+top_rear_left]);
|
|
}
|
|
if (i == 10) {
|
|
translate([pcb_hole_x-(top_standoff[0]/2)-gap-adjust-.45,pcb_hole_y-1,
|
|
bottom_height-top_front_left]) cube([gap+adjust+1,2,top_height+top_front_left]);
|
|
}
|
|
if (i == 13) {
|
|
translate([pcb_hole_x+(top_standoff[0]/2)-adjust-.45,pcb_hole_y-1,
|
|
bottom_height-top_rear_right]) cube([gap+adjust+1,2,top_height+top_rear_right]);
|
|
}
|
|
if (i == 16) {
|
|
translate([pcb_hole_x+(top_standoff[0]/2)-adjust-.45,pcb_hole_y-1,
|
|
bottom_height-top_front_right]) cube([gap+adjust+1,2,top_height+top_front_right]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// extended standoff sidewall support
|
|
if(case_ext_standoffs == true && sidewall_support == true) {
|
|
// right-rear standoff
|
|
if(width-pcb_loc_x-pcb_width >= 10 || pcb_loc_y >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2)+(top_ext_standoff[0]/2)-.6,
|
|
(c_fillet/2)-1,bottom_height]) cube([gap+adjust+2,2,top_height]);
|
|
}
|
|
// right-front standoff
|
|
if((width-pcb_loc_x-pcb_width >= 10 && depth-pcb_loc_y-pcb_depth >= 10)
|
|
|| width-pcb_loc_x-pcb_width >= 10) {
|
|
translate([width-(2*(wallthick+gap))-(c_fillet/2)+(top_ext_standoff[0]/2)-.6,
|
|
depth-(c_fillet/2)-(2*(wallthick+gap))-1,bottom_height])
|
|
cube([gap+adjust+2,2,top_height]);
|
|
}
|
|
// left-rear standoff
|
|
if(pcb_loc_x >= 10 || pcb_loc_y >= 10) {
|
|
translate([(c_fillet/2)-(wallthick+gap)-(top_ext_standoff[0]/2)+.6,(c_fillet/2)-1,
|
|
bottom_height]) cube([gap+adjust+2,2,top_height]);
|
|
}
|
|
// left-front standoff
|
|
if(pcb_loc_x >= 10 || depth-pcb_loc_y-pcb_depth >= 10) {
|
|
translate([(c_fillet/2)-(wallthick+gap)-(top_ext_standoff[0]/2)+.6,
|
|
depth-(c_fillet/2)-(2*(wallthick+gap))-1, bottom_height])
|
|
cube([gap+adjust+2,2,top_height]);
|
|
}
|
|
}
|
|
}
|
|
// subtractive accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if ((class == "sub" && face == "top") || class == "suball") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,
|
|
parametric,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,
|
|
parametric,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// create openings for additive
|
|
if (class == "add2" && face == "top" && type == "standoff") {
|
|
parametric_move_sub("round",loc_x,loc_y,case_z-floorthick-adjust,face,rotation,parametric,
|
|
6.5,size_y,floorthick+1,data_1,data_2,data_3,data_4);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "uart_holder") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub("microusb",loc_x+5.25,loc_y-5,loc_z+4,face,rotation,parametric,
|
|
0,0,0,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub("microusb",loc_x+5.25,loc_y-5,loc_z+4,face,rotation,parametric,
|
|
0,0,0,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "hc4_oled_holder") {
|
|
parametric_move_sub("rectangle",loc_x+1,loc_y+1.75,loc_z+26,face,rotation,
|
|
parametric,26.5,wallthick+gap+4,14.5,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "top" && type == "button") {
|
|
if(data_3 == "recess") {
|
|
parametric_move_sub("sphere",loc_x,loc_y,loc_z,face,rotation,
|
|
parametric,size_x-1,size_y,size_z,data_1,data_2,data_3,0);
|
|
}
|
|
if(data_3 == "cutout") {
|
|
parametric_move_sub("rectangle",loc_x+10,loc_y+4,loc_z-adjust,face,rotation,
|
|
parametric,size_x+2,size_y+1,size_z+2*adjust,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
}
|
|
}
|
|
if (class == "model" && face == "bottom" && type == "hk_boom" &&
|
|
rotation[0] == 90 && rotation[1] == 0 && rotation[2] == 0) {
|
|
parametric_move_sub("round",loc_x+11,loc_y-4,loc_z,face,[0,0,0],
|
|
parametric,5,size_y,80,data_1,data_2,data_3,data_4);
|
|
parametric_move_sub("slot",loc_x+37.5,loc_y-4.75,loc_z,face,[0,0,0],
|
|
parametric,6,14,80,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
// sbc openings
|
|
if(sbc_highlight == true) {
|
|
#open_io();
|
|
}
|
|
else {
|
|
open_io();
|
|
}
|
|
// clean fillets
|
|
if(case_design == "shell") {
|
|
translate(([(width/2)-wallthick-gap,(depth/2)-wallthick-gap,
|
|
bottom_height+(top_height/2)]) )
|
|
cube_negative_fillet([width,depth,top_height], radius=-1,
|
|
vertical=[c_fillet,c_fillet,c_fillet,c_fillet],
|
|
top=[fillet,fillet,fillet,fillet,fillet],
|
|
bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
}
|
|
// additive accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "add2" && face == "top") {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// case side
|
|
module case_side(case_design,case_style,side) {
|
|
|
|
difference() {
|
|
union() {
|
|
if(case_design == "panel") {
|
|
if(side == "rear") {
|
|
difference() {
|
|
union() {
|
|
translate([-gap,-wallthick-gap,-floorthick])
|
|
cube([width-2*wallthick,wallthick,case_z+2*floorthick]);
|
|
// right hook
|
|
difference() {
|
|
translate([width-(2*wallthick)-gap-adjust,-wallthick-gap,
|
|
((case_z)/2)-4])
|
|
cube([(2*wallthick)+.5,wallthick,8]);
|
|
translate([width-(2*wallthick)-gap-adjust,-wallthick-gap-adjust,
|
|
((case_z)/2)-4-adjust])
|
|
cube([wallthick+.25,wallthick+(2*adjust),4.25]);
|
|
}
|
|
// left hook
|
|
difference() {
|
|
translate([-(2*wallthick)-gap-adjust-.25,-wallthick-gap,
|
|
((case_z)/2)-4])
|
|
cube([(2*wallthick)+.5,wallthick,8]);
|
|
translate([-wallthick-gap-adjust-.25,-wallthick-gap-adjust,
|
|
((case_z)/2)-4-adjust])
|
|
cube([wallthick+.25,wallthick+(2*adjust),4.25]);
|
|
}
|
|
}
|
|
// top slots
|
|
translate([(width*(1/5))-8.25-(wallthick+gap),-wallthick-gap-adjust,
|
|
case_z-floorthick-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
translate([width-(width*(1/5))-(wallthick+gap)-.25,-wallthick-gap-adjust,
|
|
case_z-floorthick-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
// bottom slots
|
|
translate([(width*(1/5))-8.25-(wallthick+gap),-wallthick-gap-adjust,-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
translate([width-(width*(1/5))-(wallthick+gap)-.25,-wallthick-gap-adjust,-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
}
|
|
}
|
|
if(side == "front") {
|
|
difference() {
|
|
union() {
|
|
translate([-gap,depth-2*(wallthick)-gap,-floorthick])
|
|
cube([width-2*wallthick,wallthick,case_z+2*floorthick]);
|
|
// right hook
|
|
difference() {
|
|
translate([width-(2*wallthick)-gap-adjust,depth-2*(wallthick)-gap-adjust,
|
|
((case_z)/2)-4])
|
|
cube([(2*wallthick)+.5,wallthick,8]);
|
|
translate([width-(2*wallthick)-gap-adjust,
|
|
depth-2*(wallthick)-adjust-gap-adjust,((case_z)/2)-4-adjust])
|
|
cube([wallthick+.25,wallthick+(2*adjust),4.25]);
|
|
}
|
|
// left hook
|
|
difference() {
|
|
translate([-(2*wallthick)-gap-adjust-.25,depth-2*(wallthick)-gap-adjust,(
|
|
(case_z)/2)-4])
|
|
cube([(2*wallthick)+.5,wallthick,8]);
|
|
translate([-wallthick-gap-adjust-.25,depth-2*(wallthick)-adjust-gap-adjust,
|
|
((case_z)/2)-4-adjust])
|
|
cube([wallthick+.25,wallthick+(2*adjust),4.25]);
|
|
}
|
|
}
|
|
// top slots
|
|
translate([(width*(1/5))-8.25-(wallthick+gap),depth-2*wallthick-gap-adjust,
|
|
case_z-floorthick-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
translate([width-(width*(1/5))-(wallthick+gap)-.25,depth-2*wallthick-gap-adjust,
|
|
case_z-floorthick-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
// bottom slots
|
|
translate([(width*(1/5))-8.25-(wallthick+gap),depth-2*wallthick-gap-adjust,-.25])
|
|
cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
translate([width-(width*(1/5))-(wallthick+gap)-.25,
|
|
depth-2*wallthick-gap-adjust,-.25]) cube([8.5,wallthick+2*adjust,floorthick+.5]);
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
translate([width-(2*wallthick)-gap,-(2*wallthick)-gap,-wallthick])
|
|
cube([wallthick,depth+2*wallthick,case_z+(2*wallthick)]);
|
|
translate([width-(2*wallthick)-gap-adjust,-wallthick-gap-.25,
|
|
((case_z)/2)]) cube([wallthick+2*adjust,wallthick+.5,8.5]);
|
|
translate([width-(2*wallthick)-gap-adjust,depth-2*(wallthick)-gap-.25,
|
|
((case_z)/2)])
|
|
cube([wallthick+2*adjust,wallthick+.5,8.5]);
|
|
}
|
|
}
|
|
if(side == "left") {
|
|
difference() {
|
|
translate([-wallthick-gap,-(2*wallthick)-gap,-wallthick])
|
|
cube([wallthick,depth+2*wallthick,case_z+(2*wallthick)]);
|
|
translate([-wallthick-gap-adjust,-wallthick-gap-.25,((case_z)/2)])
|
|
cube([wallthick+2*adjust,wallthick+.5,8.5]);
|
|
translate([-wallthick-gap-adjust,depth-2*(wallthick)-gap-.25,
|
|
((case_z)/2)])
|
|
cube([wallthick+2*adjust,wallthick+.5,8.5]);
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "tray" && case_style == "sides") {
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([width-wallthick-gap,-(2*wallthick)-gap,0])
|
|
cube([sidethick,depth+2*wallthick,case_z+(2*wallthick)]);
|
|
translate([width-gap-wallthick-1+adjust,depth-2*(wallthick+gap)-.5,case_z+(2*wallthick)-2])
|
|
cube([1,6,2]);
|
|
translate([width-gap-wallthick-1+adjust,-2*(wallthick+gap)+1.5,case_z+(2*wallthick)-2])
|
|
cube([1,6,2]);
|
|
// top rail
|
|
translate([width-6.9-adjust,-gap,case_z-floorthick-.5])
|
|
cube([4,depth-2*(wallthick+gap),2]);
|
|
}
|
|
// right side bottom attachment holes
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0]) cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
if(depth >= 75) {
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
else {
|
|
translate([width-2*(wallthick+gap)-sidethick-adjust,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
}
|
|
}
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([-wallthick-gap-sidethick,-(2*wallthick)-gap,0])
|
|
cube([sidethick,depth+2*wallthick,case_z+(2*wallthick)]);
|
|
translate([-gap-wallthick-adjust,depth-2*(wallthick+gap)-.5,case_z+(2*wallthick)-2])
|
|
cube([1,6,2]);
|
|
translate([-gap-wallthick-adjust,-2*(wallthick+gap)+1.5,case_z+(2*wallthick)-2])
|
|
cube([1,6,2]);
|
|
// top rail
|
|
translate([-wallthick-gap-adjust,-gap,case_z-floorthick-.5])
|
|
cube([4,depth-2*(wallthick+gap),2]);
|
|
}
|
|
// left side bottom attachment holes
|
|
translate([-wallthick-gap-adjust-5,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0]) cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
if(depth >= 75) {
|
|
translate([-wallthick-gap-adjust-6,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
else {
|
|
translate([-wallthick-gap-adjust-6,wallthick+gap+40,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0])
|
|
cylinder(d=3, h=10+sidethick+(2*adjust));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(case_design == "tray" && case_style == "vu5") {
|
|
cheight = case_z+90;
|
|
vesa = 75;
|
|
vu_holder(case_style,side,vesa,cheight);
|
|
}
|
|
if(case_design == "tray" && case_style == "vu7") {
|
|
cheight = case_z+122;
|
|
vesa = 100;
|
|
vu_holder(case_style,side,vesa,cheight);
|
|
}
|
|
// additive accessories
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "add1" && face == side) {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if ((class == "sub" && face == side) || class == "suball") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// create openings for additive
|
|
if ((class == "sub" && face == "bottom") || class == "suball") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// create openings for additive
|
|
if (class == "add2" && face == "bottom" && type == "standoff") {
|
|
parametric_move_sub("round",loc_x,loc_y,-.1,face,rotation,parametric,
|
|
6.5,size_y,floorthick+1,data_1,data_2,data_3,data_4);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "uart_holder") {
|
|
if(accessory_highlight == false) {
|
|
parametric_move_sub("microusb",loc_x+5.25,loc_y-5,loc_z+4,face,rotation,parametric,
|
|
0,0,0,data_1,data_2,data_3,data_4);
|
|
}
|
|
else {
|
|
#parametric_move_sub("microusb",loc_x+5.25,loc_y-5,loc_z+4,face,rotation,parametric,
|
|
0,0,0,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "hc4_oled_holder") {
|
|
parametric_move_sub("rectangle",loc_x+1,loc_y+1.75,loc_z+25.5,face,rotation,
|
|
parametric,26.5,wallthick+gap+4,15,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "access_port") {
|
|
if(data_3 == "landscape") {
|
|
parametric_move_sub("rectangle",loc_x+6,loc_y-.5,loc_z-adjust,face,rotation,
|
|
parametric,size_x-17,size_y-1,floorthick+1,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
parametric_move_sub("rectangle",loc_x+size_x-12.5,loc_y+(size_y/2)-6,loc_z-adjust,face,rotation,
|
|
parametric,5.5,10.5,floorthick+.12,data_1,data_2,data_3,[5.5,5.5,5.5,5.5]);
|
|
}
|
|
else {
|
|
parametric_move_sub("rectangle",loc_x+.5,loc_y+5.75,loc_z-adjust,face,rotation,parametric,
|
|
size_x-1,size_y-17,floorthick+1,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
parametric_move_sub("rectangle",loc_x+(size_x/2)-5,loc_y+size_y-12.5,loc_z-adjust,face,rotation,
|
|
parametric,10.5,5.5,floorthick+.12,data_1,data_2,data_3,[5.5,5.5,5.5,5.5]);
|
|
}
|
|
}
|
|
if ((class == "model") && face == "bottom" && type == "h2_netcard") {
|
|
parametric_move_sub("rectangle",loc_x+25,loc_y-6,loc_z-14,face,rotation,
|
|
parametric,68.5,wallthick+3,14.5,data_1,data_2,data_3,[1,1,1,1]);
|
|
}
|
|
if ((class == "add1" || class == "add2") && face == "bottom" && type == "button") {
|
|
if(data_3 == "recess") {
|
|
parametric_move_sub("sphere",loc_x,loc_y,loc_z,face,rotation,
|
|
parametric,size_x-1,size_y,size_z,data_1,data_2,data_3,0);
|
|
}
|
|
if(data_3 == "cutout") {
|
|
parametric_move_sub("rectangle",loc_x+10,loc_y+4,loc_z-adjust,face,rotation,
|
|
parametric,size_x+2,size_y+1,size_z+2*adjust,data_1,data_2,data_3,[.1,.1,.1,.1]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// sbc openings
|
|
if(sbc_highlight == true) {
|
|
#open_io();
|
|
}
|
|
else {
|
|
open_io();
|
|
}
|
|
}
|
|
if(accessory_name != "none") {
|
|
for (i=[1:15:len(accessory_data[a[0]])-1]) {
|
|
class = accessory_data[a[0]][i];
|
|
type = accessory_data[a[0]][i+1];
|
|
loc_x = accessory_data[a[0]][i+2];
|
|
loc_y = accessory_data[a[0]][i+3];
|
|
loc_z = accessory_data[a[0]][i+4];
|
|
face = accessory_data[a[0]][i+5];
|
|
rotation = accessory_data[a[0]][i+6];
|
|
parametric = accessory_data[a[0]][i+7];
|
|
size_x = accessory_data[a[0]][i+8];
|
|
size_y = accessory_data[a[0]][i+9];
|
|
size_z = accessory_data[a[0]][i+10];
|
|
data_1 = accessory_data[a[0]][i+11];
|
|
data_2 = accessory_data[a[0]][i+12];
|
|
data_3 = accessory_data[a[0]][i+13];
|
|
data_4 = accessory_data[a[0]][i+14];
|
|
|
|
if (class == "add2" && face == side) {
|
|
parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// sbc openings
|
|
module open_io() {
|
|
|
|
for (i=[69:6:len(sbc_data[s[0]])-1]) {
|
|
loc_x = sbc_data[s[0]][i]+pcb_loc_x;
|
|
loc_y = sbc_data[s[0]][i+1]+pcb_loc_y;
|
|
rotation = sbc_data[s[0]][i+2];
|
|
side = sbc_data[s[0]][i+3];
|
|
class = sbc_data[s[0]][i+4];
|
|
type = sbc_data[s[0]][i+5];
|
|
|
|
mask(loc_x,loc_y,bottom_height+pcb_loc_z-adjust,rotation,side,class,type,wallthick,gap,floorthick,pcb_z);
|
|
|
|
// indents
|
|
if(indents == true) {
|
|
indent(loc_x,loc_y,bottom_height+pcb_loc_z-adjust,rotation,side,class,type,wallthick,gap,floorthick,pcb_z);
|
|
}
|
|
|
|
// bottom cooling openings
|
|
if(side == "bottom" && cooling == "fan" && class == "heatsink") {
|
|
translate([loc_x+12,loc_y-28,-adjust])
|
|
fan_mask(40,floorthick+(2*adjust),2);
|
|
}
|
|
if(side == "bottom" && cooling == "vents" && class == "heatsink") {
|
|
for(r=[loc_x+13:4:54]) {
|
|
translate([r,loc_y-20,-adjust])
|
|
cube([2,25,floorthick+(adjust*2)]);
|
|
}
|
|
}
|
|
if(side == "bottom" && cooling == "custom" && class == "heatsink") {
|
|
translate([loc_x+12,loc_y-14,-(floorthick-adjust)])
|
|
linear_extrude(height = wallthick+(2*adjust)) import(file = "./dxf/customfan.dxf");
|
|
}
|
|
if(side == "bottom" && exhaust_vents == "vent" && (cooling == "fan" || cooling == "vents"
|
|
|| cooling == "custom") && class == "heatsink" && gpio_opening != "vent" && gpio_opening != "open"
|
|
&& gpio_opening != "punchout") {
|
|
for(r=[loc_x+7:4:46+loc_x]) {
|
|
translate([r,depth-(2*wallthick)-adjust-2,floorthick+2])
|
|
cube([2,wallthick+(2*adjust)+1,top_height-floorthick-6]);
|
|
}
|
|
}
|
|
// top cooling openings
|
|
if(side == "top" && cooling == "fan" && class == "heatsink" && type != "h3_oem"
|
|
&& type != "h2_oem" && type != "n2_oem" && type != "n2+_oem") {
|
|
translate([loc_x+6,loc_y-28,case_z-(floorthick+adjust)-5])
|
|
fan_mask(40,floorthick+(2*adjust)+8,2);
|
|
}
|
|
if(side == "top" && cooling == "fan" && class == "heatsink" && (type == "n2_oem" || type == "n2+_oem")) {
|
|
translate([loc_x+4,loc_y+5.5,-adjust])
|
|
fan_mask(80,floorthick+(2*adjust),2);
|
|
if(sbc_model == "n2") {
|
|
translate([pcb_loc_x+7,pcb_loc_y+15,-adjust]) cylinder(d=3,h=floorthick+(adjust*2));
|
|
translate([pcb_loc_x+82,pcb_loc_y+6,-adjust]) cylinder(d=3,h=floorthick+(adjust*2));
|
|
translate([pcb_loc_x+8,pcb_loc_y+75,-adjust]) cylinder(d=3,h=floorthick+(adjust*2));
|
|
translate([pcb_loc_x+82,pcb_loc_y+75,-adjust]) cylinder(d=3,h=floorthick+(adjust*2));
|
|
}
|
|
}
|
|
if(side == "top" && cooling == "fan" && class == "heatsink" && type == "h2_oem") {
|
|
translate([loc_x-28,loc_y-28,case_z-(floorthick+adjust)])
|
|
fan_mask(90,floorthick+6,2);
|
|
}
|
|
if(side == "top" && cooling == "fan" && class == "heatsink" && type == "h3_oem" ) {
|
|
translate([loc_x-5,loc_y-16,case_z-(floorthick+adjust)])
|
|
fan_mask(90,floorthick+6,2);
|
|
}
|
|
if(side == "top" && cooling == "vents" && class == "heatsink") {
|
|
for(r=[loc_x+7:4:48+loc_x]) {
|
|
translate([r,loc_y-20,case_z-(floorthick+adjust)-6])
|
|
cube([2,25,floorthick+(adjust*2)+8]);
|
|
}
|
|
}
|
|
if(side == "top" && cooling == "custom" && class == "heatsink") {
|
|
translate([loc_x+6,loc_y-14,case_z-(floorthick+adjust)])
|
|
linear_extrude(height = wallthick+(2*adjust)) import(file = "./dxf/customfan.dxf");
|
|
}
|
|
if(side == "top" && exhaust_vents == "vent" && (cooling == "fan" || cooling == "vents"
|
|
|| cooling == "custom") && class == "heatsink" && gpio_opening != "vent" && gpio_opening != "open"
|
|
&& gpio_opening != "punchout") {
|
|
for(r=[loc_x+7:4:46+loc_x]) {
|
|
translate([r,depth-(2*wallthick)-adjust-2,bottom_height+2])
|
|
cube([2,wallthick+(2*adjust)+1,top_height-floorthick-6]);
|
|
}
|
|
}
|
|
|
|
// gpio opening
|
|
if(side == "top" && class == "gpio" && type == "header_40" && rotation == 0) {
|
|
if(gpio_opening == "vent") {
|
|
for(r=[loc_x-2:4:50+loc_x]) {
|
|
translate([r,depth-(2*wallthick)-gap-adjust,bottom_height+2])
|
|
cube([2,wallthick+(2*adjust),top_height-floorthick-7]);
|
|
}
|
|
}
|
|
if(gpio_opening == "open") {
|
|
translate([loc_x-2,depth-(2*wallthick)-adjust-gap,bottom_height+3])
|
|
cube([54,wallthick+(2*adjust),top_height-floorthick-5]);
|
|
}
|
|
if(gpio_opening == "punchout") {
|
|
translate([loc_x+1,depth-(2*wallthick)-adjust-gap,bottom_height+7.5])
|
|
rotate([-90,0,0]) punchout(50,11,2,wallthick+(2*adjust),c_fillet,"slot");
|
|
}
|
|
}
|
|
if(side == "top" && class == "gpio" && type == "header_40" && rotation == 90) {
|
|
if(gpio_opening == "vent") {
|
|
for(r=[loc_y-2:4:50+loc_y]) {
|
|
translate([width-2*(wallthick+gap)-adjust,depth-r,bottom_height+2])
|
|
rotate([0,0,0]) cube([6,wallthick+(2*adjust),top_height-floorthick-7]);
|
|
}
|
|
}
|
|
if(gpio_opening == "open") {
|
|
translate([loc_x+8,depth-13,bottom_height+4])
|
|
rotate([0,0,-90]) cube([54,wallthick+(2*adjust),top_height-floorthick-5]);
|
|
}
|
|
if(gpio_opening == "punchout") {
|
|
translate([loc_x+8,depth-15,bottom_height+7.5])
|
|
rotate([-90,0,-90]) punchout(50,11,2,wallthick+(2*adjust),c_fillet,"slot");
|
|
}
|
|
}
|
|
if(side == "top" && class == "gpio" && type == "encl_header_30") {
|
|
if(gpio_opening == "vent") {
|
|
for(r=[loc_x-2:4:39+loc_x]) {
|
|
translate([r,depth-(2*wallthick)-adjust,bottom_height+2])
|
|
cube([2,wallthick+(2*adjust),top_height-floorthick-4]);
|
|
}
|
|
}
|
|
if(gpio_opening == "open") {
|
|
translate([loc_x-2,depth-(2*wallthick)-adjust,bottom_height+3])
|
|
cube([41,wallthick+(2*adjust),top_height-floorthick-5]);
|
|
}
|
|
if(gpio_opening == "punchout") {
|
|
translate([loc_x+1,depth-(2*wallthick)-adjust-gap,bottom_height+8])
|
|
rotate([-90,0,0]) punchout(34,11,2,wallthick+(2*adjust),3,"slot");
|
|
}
|
|
}
|
|
|
|
// uart knockout opening
|
|
if(side == "top" && type == "uart_micro" && rotation == 90) {
|
|
translate([loc_x-wallthick-gap-8.5,loc_y-1,bottom_height+5]) rotate([90,0,90])
|
|
punchout(15,8,1,wallthick+(2*adjust)+10,2,"rectangle");
|
|
}
|
|
if(side == "top" && type == "uart_micro" && rotation == -90) {
|
|
translate([loc_x+2*(wallthick+gap)+1,loc_y-1,bottom_height+5]) rotate([90,0,90])
|
|
punchout(15,8,1,wallthick+(2*adjust)+5,2,"rectangle");
|
|
}
|
|
if(side == "top" && type == "uart_micro" && rotation == 270) {
|
|
translate([loc_x-2*(wallthick),loc_y-1,bottom_height+5]) rotate([90,0,90])
|
|
punchout(15,8,1,wallthick+(2*adjust)+12,2,"rectangle");
|
|
}
|
|
|
|
// sata openings
|
|
if(side == "top" && type == "sata_power_vrec" && sata_punchout == true) {
|
|
translate([loc_x-3,loc_y+1.75,case_z-adjust-floorthick])
|
|
punchout(42,7.5,2,floorthick+(2*adjust)+6,3,"slot");
|
|
}
|
|
}
|
|
}
|
|
|
|
module vu_holder(vu_model,side,vesa,cheight) {
|
|
|
|
//cheight = case_z+90;
|
|
v_fillet = 3;
|
|
|
|
vu5_case_x_offset = 6.5; // for uniform front vu5=6.5, vu7=20
|
|
vu5_pcb_width = 121;
|
|
vu5_pcb_height = 93.31;
|
|
vu5_width = vu5_pcb_width + vu5_case_x_offset;
|
|
vu5_height = vu5_pcb_height + 9.75;
|
|
|
|
vu7_case_x_offset = 20; // for uniform front vu5=6.5, vu7=20
|
|
vu7_pcb_width = 172.90;
|
|
vu7_pcb_height = 124.27;
|
|
vu7_width = vu7_pcb_width + vu7_case_x_offset;
|
|
vu7_height = vu7_pcb_height + 9.75;
|
|
|
|
difference() {
|
|
union() {
|
|
if(side == "right") {
|
|
translate([width-wallthick-gap,-(2*wallthick)-gap,0])
|
|
cube([sidethick,depth+2*wallthick,cheight]);
|
|
// right tabs for vu5 attachment
|
|
if(case_style == "vu5") {
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick,depth-39,
|
|
case_z+80]) rotate([90-vu_rotation[0],180,0])
|
|
slab_r([((width-vesa)/2)+4.5,10,sidethick], [.1,.1,3,3]);
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick,depth-26,
|
|
case_z+31.5]) rotate([90-vu_rotation[0],180,0])
|
|
slab_r([((width-vesa)/2)+4.5,10,sidethick], [.1,.1,3,3]);
|
|
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick,depth-41.85-adjust,
|
|
case_z+79.25]) rotate([90-vu_rotation[0],180,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),sidethick]);
|
|
}
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick,depth-28.85-adjust,
|
|
case_z+30.75]) rotate([90-vu_rotation[0],180,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),sidethick]);
|
|
}
|
|
}
|
|
// right tabs for vu7 attachment
|
|
if(case_style == "vu7") {
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick-1,depth-49.40,
|
|
case_z+vu7_height-15]) rotate([90-vu_rotation[0],180,0])
|
|
slab_r([((width-vesa)/2)+12,10,sidethick], [.1,.1,3,3]);
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick-1,depth-23.60,
|
|
case_z+22.5]) rotate([90-vu_rotation[0],180,0])
|
|
slab_r([((width-vesa)/2)+12,10,sidethick], [.1,.1,3,3]);
|
|
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick,depth-52.25,
|
|
case_z+vu7_height-15.75]) rotate([90-vu_rotation[0],180,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),sidethick]);
|
|
}
|
|
translate([(width/2)+((width-vesa)/2)+(vesa/2)-sidethick,depth-26.5,
|
|
case_z+21.8]) rotate([90-vu_rotation[0],180,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),sidethick]);
|
|
}
|
|
}
|
|
// top rail
|
|
translate([width-6.9-adjust,-gap,case_z-floorthick-.5])
|
|
cube([4,depth-2*(wallthick+gap),2]);
|
|
}
|
|
if(side == "left") {
|
|
translate([-wallthick-gap-sidethick,-(2*wallthick)-gap,0])
|
|
cube([sidethick,depth+2*wallthick,cheight]);
|
|
// left tabs for vu5 attachment
|
|
if(case_style == "vu5") {
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-3.5-adjust,depth-36.4,
|
|
case_z+70]) rotate([90+vu_rotation[0],0,0])
|
|
slab_r([((width-vesa)/2)+4,10, sidethick], [.1,.1,3,3]);
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-3.5-adjust,depth-23.5,
|
|
case_z+22]) rotate([90+vu_rotation[0],0,0])
|
|
slab_r([((width-vesa)/2)+4,10,sidethick], [.1,.1,3,3]);
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-3.5-adjust,depth-39.35+adjust,
|
|
case_z+69.25]) rotate([90+vu_rotation[0],0,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),2*sidethick]);
|
|
}
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-3.5-adjust,depth-26.4+adjust,
|
|
case_z+21.25]) rotate([90+vu_rotation[0],0,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),2*sidethick]);
|
|
}
|
|
}
|
|
// left tabs for vu7 attachment
|
|
if(case_style == "vu7") {
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-4.25-adjust,depth-46.85,
|
|
case_z+vu7_height-24.5]) rotate([90+vu_rotation[0],0,0])
|
|
slab_r([((width-vesa)/2),10, sidethick], [.1,.1,3,3]);
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-4.25-adjust,depth-21,
|
|
case_z+13]) rotate([90+vu_rotation[0],0,0])
|
|
slab_r([((width-vesa)/2),10,sidethick], [.1,.1,3,3]);
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-4-adjust,depth-49.75+adjust,
|
|
case_z+vu7_height-25.25]) rotate([90+vu_rotation[0],0,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),2*sidethick]);
|
|
}
|
|
translate([-((width-vesa)/2)+(width/2)-(vesa/2)-4-adjust,depth-23.75+adjust,
|
|
case_z+12.25]) rotate([90+vu_rotation[0],0,0])
|
|
difference() {
|
|
cube([sidethick,10,sidethick]);
|
|
translate([0,-adjust,sidethick]) rotate([0,45,0])
|
|
cube([2*sidethick,10+(2*adjust),2*sidethick]);
|
|
}
|
|
}
|
|
// top rail
|
|
translate([-wallthick-gap-adjust,-gap,case_z-floorthick-.5])
|
|
cube([4,depth-2*(wallthick+gap),2]);
|
|
}
|
|
}
|
|
|
|
if(side == "right") {
|
|
// vu5 shape and back cut
|
|
if(case_style == "vu5") {
|
|
translate([width+sidethick-2,-.6,case_z+sidethick+2.5])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = 2*sidethick)
|
|
polygon(points = [ [-sidethick,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,depth-53],
|
|
[-sidethick,depth-33]]);
|
|
|
|
translate([width-(sidethick/2),depth-8,case_z+(121/2)])
|
|
rotate([vu_rotation[0],0,0])
|
|
cube_fillet_inside([10,50,110],vertical=[v_fillet,v_fillet,v_fillet,v_fillet],
|
|
top=[0,0,0,0],bottom=[3,3,3,3], $fn=90);
|
|
// tab holes
|
|
translate([width/2+(vesa/2)-3,depth-37,
|
|
case_z+75]) rotate([90-vu_rotation[0],180,0]) cylinder(d=3, h=sidethick+1);
|
|
translate([width/2+(vesa/2)-3,depth-24,
|
|
case_z+26.75]) rotate([90-vu_rotation[0],180,0]) cylinder(d=3, h=sidethick+1);
|
|
}
|
|
// vu7 shape and back cut
|
|
if(case_style == "vu7") {
|
|
translate([width+sidethick-2,-.6,case_z+sidethick+2.5])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = 2*sidethick)
|
|
polygon(points = [ [-sidethick,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,depth-63],
|
|
[-sidethick,depth-33]]);
|
|
|
|
translate([width-(sidethick/2),depth-10.5,case_z+70.5])
|
|
rotate([vu_rotation[0],0,0])
|
|
cube_fillet_inside([10,50,130],vertical=[v_fillet,v_fillet,v_fillet,v_fillet],
|
|
top=[0,0,0,0],bottom=[3,3,3,3], $fn=90);
|
|
// tab holes
|
|
translate([width/2+(vesa/2)-10,depth-47,case_z+vu7_height-19.75])
|
|
rotate([90-vu_rotation[0],180,0]) cylinder(d=3, h=sidethick+4);
|
|
translate([width/2+(vesa/2)-10,depth-21.25,case_z+18])
|
|
rotate([90-vu_rotation[0],180,0]) cylinder(d=3, h=sidethick+4);
|
|
}
|
|
// bottom attachment holes
|
|
translate([width-wallthick-gap-adjust-5,wallthick+gap+10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0]) cylinder(d=3, h=sidethick+(2*adjust)+10);
|
|
translate([width-wallthick-gap-adjust-5,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0]) cylinder(d=3, h=sidethick+(2*adjust)+10);
|
|
}
|
|
|
|
if(side == "left") {
|
|
// vu5 shape and back cut
|
|
if(case_style == "vu5") {
|
|
translate([-sidethick-adjust,-.6,case_z+sidethick+2.5])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = 2*sidethick)
|
|
polygon(points = [ [-sidethick,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,depth-53],
|
|
[-sidethick,depth-33]]);
|
|
|
|
translate([-wallthick-gap-(sidethick/2),depth-8,case_z+(121/2)])
|
|
rotate([vu_rotation[0],0,0])
|
|
cube_fillet_inside([10,50,110],vertical=[v_fillet,v_fillet,v_fillet,v_fillet],
|
|
top=[0,0,0,0],bottom=[3,3,3,3], $fn=90);
|
|
// tab holes
|
|
translate([width/2-(vesa/2)-3,depth-36.75,case_z+75])
|
|
rotate([90+vu_rotation[0],0,0]) cylinder(d=3, h=sidethick+1);
|
|
translate([width/2-(vesa/2)-3,depth-24.25,case_z+26.75])
|
|
rotate([90+vu_rotation[0],0,0]) cylinder(d=3, h=sidethick+1);
|
|
}
|
|
// vu7 shape and back cut
|
|
if(case_style == "vu7") {
|
|
translate([-sidethick-adjust,-.6,case_z+sidethick+2.5])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = 2*sidethick)
|
|
polygon(points = [ [-sidethick,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,-sidethick-wallthick-5],
|
|
[cheight-bottom_height-top_height-3,depth-63],
|
|
[-sidethick,depth-33]]);
|
|
|
|
translate([-wallthick-gap-(sidethick/2),depth-10.5,case_z+70.5])
|
|
rotate([vu_rotation[0],0,0])
|
|
cube_fillet_inside([10,50,130],vertical=[v_fillet,v_fillet,v_fillet,v_fillet],
|
|
top=[0,0,0,0],bottom=[3,3,3,3], $fn=90);
|
|
// tab holes
|
|
translate([width/2-(vesa/2)-10,depth-48,case_z+vu7_height-19.75])
|
|
rotate([90+vu_rotation[0],0,0]) cylinder(d=3, h=sidethick+4);
|
|
translate([width/2-(vesa/2)-10,depth-22.25,case_z+18])
|
|
rotate([90+vu_rotation[0],0,0]) cylinder(d=3, h=sidethick+4);
|
|
}
|
|
// bottom attachment holes
|
|
translate([-sidethick-adjust-6,wallthick+gap+10,((bottom_height+floorthick)/2)-1])
|
|
rotate([0,90,0]) cylinder(d=3, h=sidethick+(2*adjust)+10);
|
|
if(depth >= 75) {
|
|
translate([-sidethick-adjust-6,depth-wallthick-gap-10,
|
|
((bottom_height+floorthick)/2)-1]) rotate([0,90,0]) cylinder(d=3, h=sidethick+(2*adjust)+10);
|
|
}
|
|
else {
|
|
translate([-sidethick-adjust-6,wallthick+gap+40.5,((bottom_height+floorthick)/2)-1])
|
|
rotate([0,90,0]) cylinder(d=3, h=sidethick+(2*adjust)+10);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module parametric_move_add(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4) {
|
|
|
|
// absolute no parametrics
|
|
if(parametric[1] == false && parametric[2] == false && parametric[3] == false) {
|
|
add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
// x axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == false && parametric[3] == false) {
|
|
if(parametric[0] == "case") {
|
|
add(type,loc_x+case_offset_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x+pcb_loc_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// y axis accessory parametrics
|
|
if(parametric[1] == false && parametric[2] == true && parametric[3] == false) {
|
|
if(parametric[0] == "case") {
|
|
add(type,loc_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x,loc_y+pcb_loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// z axis accessory parametrics
|
|
if(parametric[1] == false && parametric[2] == false && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
add(type,loc_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
add(type,loc_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
add(type,loc_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x,loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
add(type,loc_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
add(type,loc_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// xy axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == true && parametric[3] == false) {
|
|
if(parametric[0] == "case") {
|
|
add(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// xz axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == false && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
add(type,loc_x+case_offset_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
add(type,loc_x+case_offset_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
add(type,loc_x+case_offset_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x+pcb_loc_x,loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
add(type,loc_x+pcb_loc_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
add(type,loc_x+pcb_loc_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// yz axis accessory parametrics
|
|
if(parametric[1] == false && parametric[2] == true && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
add(type,loc_x,loc_y+case_offset_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
add(type,loc_x,loc_y+case_offset_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
add(type,loc_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x,loc_y+pcb_loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
add(type,loc_x,loc_y+pcb_loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
add(type,loc_x,loc_y+pcb_loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// xyz axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == true && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
add(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
add(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
add(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
add(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
add(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
add(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
module parametric_move_sub(type,loc_x,loc_y,loc_z,face,rotation,parametric,
|
|
size_x,size_y,size_z,data_1,data_2,data_3,data_4) {
|
|
|
|
// absolute no parametrics
|
|
if(parametric[1] == false && parametric[2] == false && parametric[3] == false) {
|
|
sub(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
// x axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == false && parametric[3] == false) {
|
|
if(parametric[0] == "case") {
|
|
sub(type,loc_x+case_offset_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// y axis accessory parametrics
|
|
if(parametric[1] == false && parametric[2] == true && parametric[3] == false) {
|
|
if(parametric[0] == "case") {
|
|
sub(type,loc_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x,loc_y+pcb_loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// z axis accessory parametrics
|
|
if(parametric[1] == false && parametric[2] == false && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
sub(type,loc_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
sub(type,loc_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
sub(type,loc_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x,loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
sub(type,loc_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
sub(type,loc_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// xy axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == true && parametric[3] == false) {
|
|
if(parametric[0] == "case") {
|
|
sub(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// xz axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == false && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
sub(type,loc_x+case_offset_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
sub(type,loc_x+case_offset_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
sub(type,loc_x+case_offset_x,loc_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// yz axis accessory parametrics
|
|
if(parametric[1] == false && parametric[2] == true && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
sub(type,loc_x,loc_y+case_offset_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
sub(type,loc_x,loc_y+case_offset_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
sub(type,loc_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x,loc_y+pcb_loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
sub(type,loc_x,loc_y+pcb_loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
sub(type,loc_x,loc_y+pcb_loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
// xyz axis accessory parametrics
|
|
if(parametric[1] == true && parametric[2] == true && parametric[3] == true) {
|
|
if(parametric[0] == "case" && face == "top") {
|
|
sub(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face == "bottom") {
|
|
sub(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "case" && face != "bottom" && face != "top") {
|
|
sub(type,loc_x+case_offset_x,loc_y+case_offset_y,loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z+pcb_loc_z,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "top") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z+case_offset_tz+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
if(parametric[0] == "sbc-case_z" && face == "bottom") {
|
|
sub(type,loc_x+pcb_loc_x,loc_y+pcb_loc_y,loc_z+case_offset_bz,
|
|
face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* indent module */
|
|
module indent(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,pcb_z) {
|
|
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
// hdmi indent
|
|
if(class == "video" && type == "hdmi_a" && side == "top" && rotation == 0) {
|
|
place(loc_x+2.375,-(wallthick+gap)+wallthick/2,loc_z+3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "top" && rotation == 90) {
|
|
place(-gap-wallthick/2,loc_y,loc_z+3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "top" && rotation == 180) {
|
|
place(loc_x,depth-(wallthick+gap)-10-wallthick/2,loc_z+3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "top" && rotation == 270) {
|
|
place(width-(wallthick+gap)-10-wallthick/2,loc_y+2.375,loc_z+3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "bottom" && rotation == 0) {
|
|
place(loc_x,-(wallthick+gap)+wallthick/2,loc_z-pcb_z-3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "bottom" && rotation == 90) {
|
|
place(width-(wallthick+gap)-10-wallthick/2,loc_y,loc_z-5.25,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "bottom" && rotation == 180) {
|
|
place(loc_x+2.375,depth-(wallthick+gap)-10-wallthick/2,loc_z-pcb_z-3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_a" && side == "bottom" && rotation == 270) {
|
|
place(-gap-wallthick/2,loc_y+1.75,loc_z-pcb_z-3.75,12,10,rotation,side)
|
|
rotate([90,0,0]) slot(12,10,wallthick);
|
|
}
|
|
// hdmi micro indent
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 0 && side == "top") {
|
|
place(loc_x-.5,-(wallthick+gap)+wallthick/2,loc_z+1.5,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 90 && side == "top") {
|
|
place(-gap-wallthick/2,loc_y+1.5,loc_z+1.5,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 180 && side == "top") {
|
|
place(loc_x+1,depth-(wallthick+gap)-8-wallthick/2,loc_z+1.5,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 270 && side == "top") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y-.75,loc_z+1.5,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 0 && side == "bottom") {
|
|
place(loc_x+1.5,-(wallthick+gap)+wallthick/2,loc_z-3,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 90 && side == "bottom") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y+1.25,loc_z-3,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 180 && side == "bottom") {
|
|
place(loc_x-1,depth-(wallthick+gap)-8-wallthick/2,loc_z-3,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_micro" && rotation == 270 && side == "bottom") {
|
|
place(-gap-wallthick/2,loc_y-.5,loc_z-3,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
// hdmi mini indent
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 0 && side == "top") {
|
|
place(loc_x+.5,loc_y-gap-wallthick/2+1,loc_z+1.5,6,10,rotation,side)
|
|
rotate([90,0,0]) slot(6,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 90 && side == "top") {
|
|
place(loc_x-wallthick/2,loc_y+3.5,loc_z+1.5,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 180 && side == "top") {
|
|
place(loc_x+4.5,loc_y-wallthick/2,loc_z+1.5,6,10,rotation,side)
|
|
rotate([90,0,0]) slot(6,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 270 && side == "top") {
|
|
place(loc_x+wallthick/2,loc_y+1.5,loc_z+1.5,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 0 && side == "bottom") {
|
|
place(loc_x+4.5,loc_y-gap-wallthick/2+1,loc_z-3,6,10,rotation,side)
|
|
rotate([90,0,0]) slot(6,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 90 && side == "bottom") {
|
|
place(loc_x+wallthick/2,loc_y+3.5,loc_z-3,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 180 && side == "bottom") {
|
|
place(loc_x+.5,loc_y-wallthick/2,loc_z-3,6,10,rotation,side)
|
|
rotate([90,0,0]) slot(6,10,wallthick);
|
|
}
|
|
if(class == "video" && type == "hdmi_mini" && rotation == 270 && side == "bottom") {
|
|
place(loc_x-wallthick/2,loc_y+1.5,loc_z-3,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
// power plug indent
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 0 && side == "top") {
|
|
place(loc_x+3.75,-(wallthick+gap)+wallthick/2,loc_z+6.25,10,10,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=10, h=wallthick);
|
|
}
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 90 && side == "top") {
|
|
place(-gap-wallthick/2,loc_y-6.25,loc_z+6.25,10,10,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=10, h=wallthick);
|
|
}
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 180 && side == "top") {
|
|
place(loc_x-6.5,depth-10-(wallthick+gap)-wallthick/2,loc_z+6.25,10,10,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=10, h=wallthick);
|
|
}
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 270 && side == "top") {
|
|
place(width-(wallthick+gap)-10-wallthick/2,loc_y+3.75,loc_z+6.25,10,10,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=10, h=wallthick);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 0 && side == "top") {
|
|
place(loc_x+2.75,-(wallthick+gap)+wallthick/2,loc_z+2.1,7,7,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=7, h=wallthick);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 90 && side == "top") {
|
|
place(-(wallthick+gap)+wallthick/2,loc_y-4.5,loc_z+2,7,7,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=7, h=wallthick);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 180 && side == "top") {
|
|
place(loc_x-4.5,depth-(wallthick+gap)-7-wallthick/2,loc_z+2,7,7,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=7, h=wallthick);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 270 && side == "top") {
|
|
place(width-(wallthick+gap)-7-wallthick/2,loc_y+2.5,loc_z+2,7,7,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=7, h=wallthick);
|
|
}
|
|
// micro usb indent
|
|
if(class == "usb2" && type == "micro" && rotation == 0 && side == "top") {
|
|
place(loc_x-.5,-(wallthick+gap)+wallthick/2,loc_z+1.9,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 90 && side == "top") {
|
|
place(-gap-wallthick/2,loc_y+1.5,loc_z+1.9,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 180 && side == "top") {
|
|
place(loc_x+1.5,depth-(wallthick+gap)-8-wallthick/2,loc_z+1.9,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 270 && side == "top") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y-.5,loc_z+1.9,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 0 && side == "bottom") {
|
|
place(loc_x+1.5,-(wallthick+gap)+wallthick/2,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 90 && side == "bottom") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y+1.5,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 180 && side == "bottom") {
|
|
place(loc_x-.5,depth-(wallthick+gap)-8-wallthick/2,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 270 && side == "bottom") {
|
|
place(-gap-wallthick/2,loc_y-.5,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
// single horizontal usbc indent
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 0 && side == "top") {
|
|
place(loc_x+.5,-(wallthick+gap)+wallthick/2,loc_z+1.75,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 90 && side == "top") {
|
|
place(-gap-wallthick/2,loc_y+2.5,loc_z+1.75,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 180 && side == "top") {
|
|
place(loc_x+2.5,depth-(wallthick+gap)-8-wallthick/2,loc_z+2,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 270 && side == "top") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y+.5,loc_z+1.75,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 0 && side == "bottom") {
|
|
place(loc_x+2.75,-(wallthick+gap)+wallthick/2,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 90 && side == "bottom") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y+2.5,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick-(wallthick+gap)+wallthick/2);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 180 && side == "bottom") {
|
|
place(loc_x+.5,depth-(wallthick+gap)-8-wallthick/2,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 270 && side == "bottom") {
|
|
place(-gap-wallthick/2,loc_y+.5,loc_z-3.25,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(6,8,wallthick);
|
|
}
|
|
// audio jack indent
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 0 && side == "top") {
|
|
place(loc_x+3.15,-(wallthick+gap)+wallthick/2,loc_z+2,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 90 && side == "top") {
|
|
place(-gap-wallthick/2,loc_y-4.6,loc_z+2,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 180 && side == "top") {
|
|
place(loc_x-4.6,depth-(wallthick+gap)-8-wallthick/2,loc_z+2,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 270 && side == "top") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y+3.15,loc_z+2,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 0 && side == "bottom") {
|
|
place(loc_x-4.6,-(wallthick+gap)+wallthick/2,loc_z-3.5,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 90 && side == "bottom") {
|
|
place(width-(wallthick+gap)-8-wallthick/2,loc_y-4.6,loc_z-3.5,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 180 && side == "bottom") {
|
|
place(loc_x+3.15,depth-(wallthick+gap)-8-wallthick/2,loc_z-3.5,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
if(class == "audio" && type == "jack_3.5" && rotation == 270 && side == "bottom") {
|
|
place(-gap-wallthick/2,loc_y+3.15,loc_z-3.5,8,8,rotation,side)
|
|
rotate([90,0,0]) cylinder(d=8, h=wallthick);
|
|
}
|
|
}
|