3096 lines
120 KiB
OpenSCAD
3096 lines
120 KiB
OpenSCAD
/*
|
|
SBC Case Builder Library Copyright 2022 Edward A. Kisiel hominoid@cablemi.com
|
|
|
|
Contributions:
|
|
hk_vu8m(brackets),u_bracket(),screw(),m1_hdmount() Copyright 2022 Tomek Szczęsny, mctom @ www.forum.odroid.com
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
Code released under GPLv3: http://www.gnu.org/licenses/gpl.html
|
|
|
|
20220212 version 1.1.0 SBC Case Builder Library
|
|
20220220 version 1.1.1 added fan_cover(size, thick), hd_mount(hd,orientation), hd25_tab(side)
|
|
hd35_tab(side), hd_bottom_holes(hd,orientation,thick)
|
|
adjusted hd35(), other fixes and maintenance
|
|
20220227 version 1.1.2 adjusted hd25(), hd35(), updated hd_mount(hd,orientation,position,side),
|
|
hd_bottom_holes(hd,orientation,position,side,thick), hd25_tab(side), hd35_tab(side)
|
|
added hd25_vtab(side), hc4_oled() rotated 180,
|
|
added pcb_z to mask(loc_x,loc_y,rotation,side,class,type,case_z,wallthick,gap,floorthick,pcb_z)
|
|
adjusted hdmi_open() for bottom placment, added hc4_oled_holder(side,floorthick)
|
|
added buttom to mask(),
|
|
20220306 version 1.1.3 added access_port(size[],orientation), access_cover(size[],orientation), h2_netcard(), rj45(),
|
|
button(style, diameter, height), button_plunger(style, diameter, height), button_top(style,
|
|
diameter, height), button_clip(style), fixed momentary_6x6x4 mask, adjusted masks,
|
|
20220312 version 1.2.0 rotated slot in hd25_vtab(side),adjusted hc4_oled_holder(side,floorthick), adjust stud(),
|
|
added hk35_lcd(),header_5x1(),momentary45x15
|
|
20220320 version 1.2.1 added hk_boom(speakers,orientation), hk_boom_speaker(side,speaker,pcb), boom_speaker()
|
|
replaced header5x1() with header(pins), added encl_header_12(), micro2pin(), audio_jack35(),
|
|
capacitor(diameter, height), ic(size), added hk_boom_grill(), boom_speaker_holder(tolerance),
|
|
pcb_holder(size,wallthick), hk_uart(), usb_micro(), uart_micro(), boom_vring(tolerance),
|
|
added tolerance to batt_holder(tolerance)
|
|
20220406 version 1.2.2 hk_wb2(), hk_vu7c(gpio_ext, tabs), hdmi_a(), header_f(pins, height), pcb_pad(pads),
|
|
embelished boom_speaker(), changed boom_speaker_holder(style, tolerance), added boom_speaker_strap(),
|
|
adjusted access_port(), access_cover(), added @mctom's hk_vu8m(bracket), u_bracket(), spacer()
|
|
20220515 version 1.2.3 removed spacer(); added screw(); modified hk_vu8m(); added m1_hdmount(); added hdd35_25holder(length)
|
|
printer friendly punchout(),added remaining mask() entries, standardized mask()
|
|
2022xxxx version 2.x.x increased mask projection for ir_1, added mask for usb2 and usb3 single_horizontal_a, hdmi_micro,
|
|
video-hdmi_mini,microsdcard,momentary_7x3x3_90,rj45_single_short, added subtraction microusb and sphere
|
|
|
|
|
|
see https://github.com/hominoids/SBC_Case_Builder
|
|
|
|
place(x,y,z,size_x,size_y,rotation,side)
|
|
add(type,loc_x,loc_y,loc_z,size_x,size_y,size_z,rotation,face,side,case_z,data_1,data_2,data_3,data_4)
|
|
sub(type,loc_x,loc_y,loc_z,size_x,size_y,size_z,rotation,face,side,case_z,data_1,data_2,data_3,data_4)
|
|
art(scale_d1,type,size_z)
|
|
screw(screw[d, l, style])
|
|
slab(size, radius)
|
|
slab_r(size, radius)
|
|
slot(hole,length,depth)
|
|
standoff(standoff[radius,height,holesize,supportsize,supportheight,sink,style,i_dia,i_depth])
|
|
button(style, diameter, height)
|
|
button_assembly(style, diameter, height
|
|
button_plunger(style, diameter, height)
|
|
button_top(style, diameter, height)
|
|
button_clip(style)
|
|
feet (height)
|
|
pcb_holder(size,wallthick)
|
|
batt_holder(tolerance)
|
|
uart_holder()
|
|
uart_strap ()
|
|
fan_cover(size, thick)
|
|
hc4_oled_holder(side,floorthick)
|
|
hd_mount(hd,orientation,position,side)
|
|
hd25_tab(side)
|
|
hd25_vtab(side)
|
|
hd35_tab(side)
|
|
hd_bottom_holes(hd,orientation,position,side,thick)
|
|
hd25(height)
|
|
hd35()
|
|
hdd35_25holder(length)
|
|
hk_wb2()
|
|
hc4_oled()
|
|
h2_netcard()
|
|
hk35_lcd()
|
|
hk_uart()
|
|
hk_vu7c(gpio_ext, tabs)
|
|
hk_vu8m(bracket)
|
|
u_bracket()
|
|
m1_hdmount()
|
|
hdmi_a()
|
|
header_f(pins, height)
|
|
pcb_pad(pads)
|
|
usb_micro()
|
|
uart_micro()
|
|
rj45()
|
|
header(pins)
|
|
encl_header_12()
|
|
micro2pin()
|
|
audio_jack35()
|
|
capacitor(diameter, height)
|
|
ic(size)
|
|
hk_speaker()
|
|
hk_boom(speakers,orientation)
|
|
hk_boom_speaker(side,speaker,pcb)
|
|
boom_speaker()
|
|
hk_boom_grill(style,thick)
|
|
boom_speaker_holder(style,tolerance)
|
|
boom_speaker_strap()
|
|
boom_vring(tolerance)
|
|
access_port(size[],orientation)
|
|
access_cover(size[],orientation)
|
|
hdmi_open(hdmi_style)
|
|
microusb_open()
|
|
fan_mask(size, thick, style)
|
|
mask(loc_x,loc_y,rotation,side,class,type,case_z,wallthick,gap,floorthick,pcb_z)
|
|
punchout(width,depth,gap,thick,fillet,shape)
|
|
|
|
*/
|
|
|
|
use <./lib/fillets.scad>;
|
|
|
|
/* placement module *must be first* for children() */
|
|
module place(x,y,z,size_x,size_y,rotation,side) {
|
|
|
|
if (side == "top") {
|
|
if (rotation == 0 || rotation == 90 || rotation == 180 || rotation == 270) {
|
|
if ((rotation >= 0 && rotation < 90) || (rotation < -270 && rotation > -360))
|
|
translate([x,y,z]) rotate([0,0,-rotation]) children();
|
|
|
|
if ((rotation >= 90 && rotation < 180) || (rotation < -180 && rotation >= -270))
|
|
translate([x,y+size_x,z]) rotate([0,0,-rotation]) children();
|
|
|
|
if ((rotation >= 180 && rotation < 270) || (rotation < -90 && rotation >= -180))
|
|
translate([x+size_x,y+size_y,z]) rotate([0,0,-rotation]) children(0);
|
|
|
|
if ((rotation >= 270 && rotation < 360) || (rotation < 0 && rotation >= -90))
|
|
translate([x+size_y,y,z]) rotate([0,0,-rotation]) children(); }
|
|
else {
|
|
translate([x,y,z]) rotate([0,0,-rotation]) children();
|
|
}
|
|
}
|
|
if (side == "bottom") {
|
|
if (rotation == 0 || rotation == 90 || rotation == 180 || rotation == 270) {
|
|
if ((rotation >= 0 && rotation < 90) || (rotation < -270 && rotation > -360))
|
|
translate([x+size_x,y,z]) rotate([0,180,rotation]) children();
|
|
|
|
if ((rotation >= 90 && rotation < 180) || (rotation < -180 && rotation >= -270))
|
|
translate([x+size_y,y+size_x,z]) rotate([0,180,rotation]) children();
|
|
|
|
if ((rotation >= 180 && rotation < 270) || (rotation < -90 && rotation >= -180))
|
|
translate([x,y+size_y,z]) rotate([0,180,rotation]) children();
|
|
|
|
if ((rotation >= 270 && rotation < 360) || (rotation < 0 && rotation >= -90))
|
|
translate([x,y,z]) rotate([0,180,rotation]) children(); }
|
|
else {
|
|
translate([x,y,z]) rotate([0,180,rotation]) children();
|
|
|
|
}
|
|
}
|
|
children([1:1:$children-1]);
|
|
}
|
|
|
|
|
|
/* addition module */
|
|
module add(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4) {
|
|
|
|
if(type == "rectangle") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) slab_r([size_x,size_y,size_z],data_4);
|
|
}
|
|
if(type == "round") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) cylinder(d=size_x,h=size_z);
|
|
}
|
|
if(type == "slot") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) slot(size_x,size_y,size_z);
|
|
}
|
|
if(type == "text") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) linear_extrude(height = size_z) text(data_3, size=data_1);
|
|
}
|
|
if(type == "art") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) art(data_1,data_2,data_3);
|
|
}
|
|
if(type == "button") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) button(data_3,[size_x,size_y,size_z],data_4,data_1);
|
|
}
|
|
if(type == "button_top") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) button_assembly(data_3,size_x,size_z);
|
|
}
|
|
if(type == "pcb_holder") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) pcb_holder([size_x,size_y,size_z],data_1);
|
|
}
|
|
if(type == "batt_holder") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) batt_holder(data_1);
|
|
}
|
|
if(type == "uart_holder") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) uart_holder();
|
|
}
|
|
if(type == "uart_strap") {
|
|
color("grey",1) translate([loc_x,loc_y,loc_z]) rotate(rotation) uart_strap();
|
|
}
|
|
if(type == "standoff") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) standoff(data_4);
|
|
}
|
|
if(type == "hd_holder") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd_mount(data_1,data_3,"horizontal","none");
|
|
}
|
|
if(type == "hd_vertleft") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd_mount(data_1,data_3,"vertical","left");
|
|
}
|
|
if(type == "hd_vertright") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd_mount(data_1,data_3,"vertical","right");
|
|
}
|
|
if(type == "hd25") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd25(data_1);
|
|
}
|
|
if(type == "hd35") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd35();
|
|
}
|
|
if(type == "hk_wb2") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_wb2();
|
|
}
|
|
if(type == "hc4_oled") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hc4_oled();
|
|
}
|
|
if(type == "hc4_oled_holder") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hc4_oled_holder(face,size_z);
|
|
}
|
|
if(type == "h2_netcard") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) h2_netcard();
|
|
}
|
|
if(type == "hk_lcd35") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk35_lcd();
|
|
}
|
|
if(type == "hk_uart") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_uart();
|
|
}
|
|
if(type == "hk_vu7c") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_vu7c(data_1,data_2);
|
|
}
|
|
if(type == "hk_boom") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_boom(data_1,data_3);
|
|
}
|
|
if(type == "boom_speaker") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_boom_speaker(data_3,true,data_1);
|
|
}
|
|
if(type == "boom_grill") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_boom_grill(data_3,size_z);
|
|
}
|
|
if(type == "boom_speaker_holder") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) boom_speaker_holder(data_1);
|
|
}
|
|
if(type == "hk_speaker") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_speaker();
|
|
}
|
|
if(type == "fan_cover") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) fan_cover(size_x, size_z);
|
|
}
|
|
if(type == "feet") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) feet(size_x, size_z);
|
|
}
|
|
if(type == "access_port") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) access_port([size_x,size_y,size_z],data_3);
|
|
}
|
|
if(type == "access_cover") {
|
|
color("grey",1) translate([loc_x,loc_y,loc_z]) rotate(rotation) access_cover([size_x,size_y,size_z],data_3);
|
|
}
|
|
if(type == "boom_vring") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) boom_vring(data_1);
|
|
}
|
|
}
|
|
|
|
|
|
/* subtractive module */
|
|
module sub(type,loc_x,loc_y,loc_z,face,rotation,size_x,size_y,size_z,data_1,data_2,data_3,data_4) {
|
|
|
|
if(type == "rectangle") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) slab_r([size_x,size_y,size_z],data_4);
|
|
}
|
|
if(type == "round") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) cylinder(d=size_x,h=size_z);
|
|
}
|
|
if(type == "slot") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) slot(size_x,size_y,size_z);
|
|
}
|
|
if(type == "text") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) linear_extrude(height = size_z) text(data_3, size=data_1);
|
|
}
|
|
if(type == "art") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) art(data_1,data_2,data_3);
|
|
}
|
|
if(type == "button") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) button(data_3,[size_x,size_y,size_z],data_4,data_1);
|
|
}
|
|
if(type == "hd_holes") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd_bottom_holes(data_1,data_3,"none","none",data_2);
|
|
}
|
|
if(type == "hd_vertleft_holes") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd_bottom_holes(data_1,data_3,"vertical","left",data_2);
|
|
}
|
|
if(type == "hd_vertright_holes") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hd_bottom_holes(data_1,data_3,"vertical","right",data_2);
|
|
}
|
|
if(type == "hk_fan_top") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) hk_fan_top();
|
|
}
|
|
if(type == "punchout") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) punchout(size_x,size_y,data_1,size_z,data_2,data_3);
|
|
}
|
|
if(type == "fan") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) fan_mask(size_x, size_z, data_1);
|
|
}
|
|
if(type == "vent") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) vent(size_x,size_y,size_z,data_4,data_1,data_2,data_3);
|
|
}
|
|
if(type == "microusb") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) microusb_open();
|
|
}
|
|
if(type == "sphere") {
|
|
translate([loc_x,loc_y,loc_z]) rotate(rotation) sphere(d=size_x);
|
|
}
|
|
}
|
|
|
|
|
|
/* art work module */
|
|
module art(scale_d1,size_z,type) {
|
|
|
|
linear_extrude(height = size_z) import(file = type, scale=scale_d1);
|
|
|
|
}
|
|
|
|
// General purpose screw
|
|
// screw(screw[d, l, style])
|
|
// d - thread diameter
|
|
// l - thread length
|
|
// style - screw head style
|
|
//
|
|
// Styles:
|
|
// 0 - Mushroom head, 5mm diameter
|
|
|
|
module screw(screw_type) {
|
|
d = screw_type[0];
|
|
l = screw_type[1];
|
|
style = screw_type[2];
|
|
|
|
// Head
|
|
if(style == 0) {
|
|
difference() {
|
|
translate([ 0, 0, -0.3]) sphere(2.7);
|
|
translate([-10,-10,-10]) cube([20,20,10]);
|
|
translate([-10,-10, 2]) cube([20,20,10]);
|
|
}
|
|
}
|
|
// Thread
|
|
rotate([180,0,0]) cylinder(d=d, h=l);
|
|
}
|
|
|
|
/* slab module */
|
|
module slab(size, radius) {
|
|
|
|
x = size[0];
|
|
y = size[1];
|
|
z = size[2];
|
|
linear_extrude(height=z)
|
|
hull() {
|
|
translate([0+radius ,0+radius, 0]) circle(r=radius);
|
|
translate([0+radius, y-radius, 0]) circle(r=radius);
|
|
translate([x-radius, y-radius, 0]) circle(r=radius);
|
|
translate([x-radius, 0+radius, 0]) circle(r=radius);
|
|
}
|
|
}
|
|
|
|
|
|
/* multi-radius round slab */
|
|
module slab_r(size, radius) {
|
|
|
|
x = size[0];
|
|
y = size[1];
|
|
z = size[2];
|
|
r0 = radius[0];
|
|
r1 = radius[1];
|
|
r2 = radius[2];
|
|
r3 = radius[3];
|
|
|
|
linear_extrude(height=z)
|
|
hull() {
|
|
translate([0+radius[0] ,0+radius[0], 0]) circle(r=radius[0]);
|
|
translate([0+radius[1], y-radius[1], 0]) circle(r=radius[1]);
|
|
translate([x-radius[2], y-radius[2], 0]) circle(r=radius[2]);
|
|
translate([x-radius[3], 0+radius[3], 0]) circle(r=radius[3]);
|
|
}
|
|
}
|
|
|
|
|
|
/* slot module */
|
|
module slot(hole,length,depth) {
|
|
|
|
hull() {
|
|
translate([0,0,0]) cylinder(d=hole,h=depth);
|
|
translate([length,0,0]) cylinder(d=hole,h=depth);
|
|
}
|
|
}
|
|
|
|
|
|
/* standoff module
|
|
standoff(standoff[radius,height,holesize,supportsize,supportheight,sink,style,reverse,insert_e,i_dia,i_depth])
|
|
sink=0 none
|
|
sink=1 countersink
|
|
sink=2 recessed hole
|
|
sink=3 nut holder
|
|
sink=4 blind hole
|
|
|
|
style=0 hex shape
|
|
style=1 cylinder
|
|
*/
|
|
module standoff(stand_off){
|
|
|
|
radius = stand_off[0];
|
|
height = stand_off[1];
|
|
holesize = stand_off[2];
|
|
supportsize = stand_off[3];
|
|
supportheight = stand_off[4];
|
|
sink = stand_off[5];
|
|
style = stand_off[6];
|
|
reverse = stand_off[7];
|
|
insert_e = stand_off[8];
|
|
i_dia = stand_off[9];
|
|
i_depth = stand_off[10];
|
|
|
|
adjust = 0.1;
|
|
|
|
difference (){
|
|
union () {
|
|
if(style == 0 && reverse == 0) {
|
|
rotate([0,0,30]) cylinder(d=radius*2/sqrt(3),h=height,$fn=6);
|
|
}
|
|
if(style == 0 && reverse == 1) {
|
|
translate([0,0,-height]) rotate([0,0,30]) cylinder(d=radius*2/sqrt(3),h=height,$fn=6);
|
|
}
|
|
if(style == 1 && reverse == 0) {
|
|
cylinder(d=radius,h=height,$fn=90);
|
|
}
|
|
if(style == 1 && reverse == 1) {
|
|
translate([0,0,-height]) cylinder(d=radius,h=height,$fn=90);
|
|
}
|
|
if(reverse == 1) {
|
|
translate([0,0,-supportheight]) cylinder(d=(supportsize),h=supportheight,$fn=60);
|
|
}
|
|
else {
|
|
cylinder(d=(supportsize),h=supportheight,$fn=60);
|
|
}
|
|
}
|
|
// hole
|
|
if(sink <= 3 && reverse == 0) {
|
|
translate([0,0,-adjust]) cylinder(d=holesize, h=height+(adjust*2),$fn=90);
|
|
}
|
|
if(sink <= 3 && reverse == 1) {
|
|
translate([0,0,-adjust-height]) cylinder(d=holesize, h=height+(adjust*2),$fn=90);
|
|
}
|
|
// countersink hole
|
|
if(sink == 1 && reverse == 0) {
|
|
translate([0,0,-adjust]) cylinder(d1=6.5, d2=(holesize), h=3);
|
|
}
|
|
if(sink == 1 && reverse == 1) {
|
|
translate([0,0,+adjust-2.5]) cylinder(d1=(holesize), d2=6.5, h=3);
|
|
}
|
|
// recessed hole
|
|
if(sink == 2 && reverse == 0) {
|
|
translate([0,0,-adjust]) cylinder(d=6.5, h=3);
|
|
}
|
|
if(sink == 2 && reverse == 1) {
|
|
translate([0,0,+adjust-3]) cylinder(d=6.5, h=3);
|
|
}
|
|
// nut holder
|
|
if(sink == 3 && reverse == 0) {
|
|
translate([0,0,-adjust]) cylinder(r=3.3,h=3,$fn=6);
|
|
}
|
|
if(sink == 3 && reverse == 1) {
|
|
translate([0,0,+adjust-3]) cylinder(r=3.3,h=3,$fn=6);
|
|
}
|
|
// blind hole
|
|
if(sink == 4 && reverse == 0) {
|
|
translate([0,0,2]) cylinder(d=holesize, h=height,$fn=90);
|
|
}
|
|
if(sink == 4 && reverse == 1) {
|
|
translate([0,0,-height-2-adjust]) cylinder(d=holesize, h=height,$fn=90);
|
|
}
|
|
if(insert_e > 0 && reverse == 0) {
|
|
translate([0,0,height-i_depth]) cylinder(d=i_dia, h=i_depth+adjust,$fn=90);
|
|
}
|
|
if(insert_e > 0 && reverse == 1) {
|
|
translate([0,0,-height-adjust]) cylinder(d=i_dia, h=i_depth+adjust,$fn=90);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* buttons */
|
|
module button(style, size, radius, pad) {
|
|
|
|
diameter = size[0];
|
|
height = size[2];
|
|
gap = 1.5;
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(style == "recess") {
|
|
difference() {
|
|
union() {
|
|
sphere(d=diameter);
|
|
translate([0,0,-height+3]) cylinder(d=6, h=height-6);
|
|
}
|
|
translate([-(diameter/2)-1,-(diameter/2)-1,0]) cube([diameter+2,diameter+2,(diameter/2)+2]);
|
|
difference() {
|
|
union() {
|
|
sphere(d=diameter-2);
|
|
}
|
|
}
|
|
translate([-1.75,-1.25,-height-1]) cube([3.5,2.5,height+2]);
|
|
translate([0,0,-(diameter/2)]) cylinder(d=5, h=2);
|
|
}
|
|
}
|
|
if(style == "cutout") {
|
|
difference() {
|
|
translate([-size[0]+2,-3-size[1]/2,0]) slab_r([size[0]+2,size[1]+6,size[2]-2*adjust], [.1,.1,.1,.1]);
|
|
difference() {
|
|
translate([-size[0]+3,-size[1]/2,-adjust])
|
|
slab_r([size[0],size[1],size[2]], [radius[0],radius[1],radius[2],radius[3]]);
|
|
translate([-size[0]+3+(gap/2),-size[1]/2+(gap/2),-1]) slab_r([size[0]-gap,size[1]-gap,1+size[2]+2*adjust],
|
|
[radius[0],radius[1],radius[2]-gap/2,radius[3]-gap/2]);
|
|
translate([-size[0]+3-gap,-1,-1]) cube([gap*2,2,1+height+2*adjust]);
|
|
}
|
|
translate([0,0,2]) sphere(d=3);
|
|
}
|
|
translate([0,0,-pad+adjust]) cylinder(d=3, h=pad);
|
|
}
|
|
}
|
|
|
|
|
|
/* button plunger,top,clip */
|
|
module button_assembly(style, diameter, height) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(style == "recess") {
|
|
button_plunger(style, diameter, height);
|
|
button_top(style, diameter, height);
|
|
translate([0,0,-height]) button_clip(style);
|
|
}
|
|
}
|
|
|
|
|
|
/* button plunger */
|
|
module button_plunger(style, diameter, height) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(style == "recess") {
|
|
difference() {
|
|
translate([-1.5,-1,-(height)-2]) cube([3,2,height+1]);
|
|
translate([-1.5-adjust,-1.5,-height]) cube([.5,3,1]);
|
|
translate([1+adjust,-1.5,-height]) cube([.5,3,1]);
|
|
translate([-1.5-adjust,-1.5,-4]) cube([.5,3,4]);
|
|
translate([1+adjust,-1.5,-4]) cube([.5,3,4]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* button top */
|
|
module button_top(style, diameter, height) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(style == "recess") {
|
|
difference() {
|
|
translate([0,0,-3]) cylinder(d=5, h=2.75);
|
|
translate([-1.25,-1.25,-3-adjust]) cube([2.5,2.5,2]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* button c-clip */
|
|
module button_clip(style) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(style == "recess") {
|
|
difference() {
|
|
cylinder(d=8.5, h=.8);
|
|
translate([-1.5,-1.75,-adjust]) cube([2.75,3.5,1]);
|
|
translate([-.75,-.75,-adjust]) cube([5,1.25,1.25]);
|
|
}
|
|
}
|
|
}
|
|
/* case feet */
|
|
module feet (diameter,height) {
|
|
|
|
difference (){
|
|
cylinder (d=diameter,h=height);
|
|
translate([0,0,-1]) cylinder (d=3, h=height+2,$fn=90);
|
|
translate ([0,0,-1]) cylinder(r=3.35,h=height-3,$fn=6);
|
|
}
|
|
}
|
|
|
|
|
|
// pcb bottom edge holder
|
|
module pcb_holder(size,wallthick) {
|
|
|
|
adjust=.01;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
translate([-1.85,-1.75,0]) cube([size[0]+3.5,5,6]);
|
|
translate([size[0]+1.65,-5.75,1])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = size[0]+3.5)
|
|
polygon(points = [ [-wallthick/2,-wallthick/2],
|
|
[2,wallthick],
|
|
[4,4],
|
|
[-wallthick/2,4]]);
|
|
translate([-1.85,4,1])
|
|
rotate([0,-90,180])
|
|
linear_extrude(height = size[0]+3.5)
|
|
polygon(points = [ [-wallthick/2,-wallthick/2],
|
|
[2,wallthick],
|
|
[2,2],
|
|
[-wallthick/2,2]]);
|
|
}
|
|
translate([-.5,0,2]) cube([size[0]+1,size[2],5]);
|
|
translate([6,-adjust-5-1.75,-adjust]) cube([size[0]-12,14,8]);
|
|
}
|
|
}
|
|
|
|
|
|
/* odroid rtc battery holder */
|
|
module batt_holder(tolerance) {
|
|
|
|
$fn = 90;
|
|
difference () {
|
|
cylinder(d=25.5,h=6);
|
|
translate ([0,0,-1]) cylinder(d=20.4+tolerance,h=8);
|
|
cube([14,26,13], true);
|
|
}
|
|
cylinder(r=12.75, h=2);
|
|
}
|
|
|
|
|
|
/* odroid uart module holder */
|
|
module uart_holder() {
|
|
|
|
rotate([0,0,0])
|
|
translate ([0,0,0])
|
|
union () {
|
|
difference () {
|
|
translate ([0,0,0]) cube([18,24,9]);
|
|
translate ([2,-2,3]) cube([14,27,7]);
|
|
//pin slot
|
|
translate ([3.5,16,-1]) cube([11,1,5]);
|
|
//component bed
|
|
translate ([3.5,1.5,2]) cube ([11,14,2]);
|
|
//side trim
|
|
translate ([-1,-1,6]) cube([20,18,4]);
|
|
}
|
|
difference (){
|
|
translate ([-1.5,20,0]) cylinder(r=3,h=9, $fn=90);
|
|
translate ([-1.5,20,-1]) cylinder (r=1.375, h=11, $fn=90);
|
|
}
|
|
difference (){
|
|
translate ([19.5,20,0]) cylinder(r=3,h=9, $fn=90);
|
|
translate ([19.5,20,-1]) cylinder (r=1.375, h=11,$fn=90);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* odroid uart strap for holder */
|
|
module uart_strap() {
|
|
difference () {
|
|
translate ([-4.5,17,9]) cube([27,6,3]);
|
|
translate ([-1.5,20,8]) cylinder (r=1.6, h=5, $fn=90);
|
|
translate ([19.5,20,8]) cylinder (r=1.6, h=5, $fn=90);
|
|
}
|
|
difference (){
|
|
translate ([-1.5,20,12]) cylinder(r=3,h=1, $fn=90);
|
|
translate ([-1.5,20,11]) cylinder (r=1.6, h=7, $fn=90);
|
|
}
|
|
difference (){
|
|
translate ([19.5,20,12]) cylinder(r=3,h=1, $fn=90);
|
|
translate ([19.5,20,11]) cylinder (r=1.6, h=7, $fn=90);
|
|
}
|
|
}
|
|
|
|
/* fan cover */
|
|
module fan_cover(size, thick) {
|
|
difference() {
|
|
color("grey",1) slab([size,size,thick],3);
|
|
color("grey",1) fan_mask(size, thick, 2);
|
|
}
|
|
}
|
|
|
|
|
|
module hk_wb2() {
|
|
difference () {
|
|
union() {
|
|
color("tan") cube([16.5,16.5,1]);
|
|
translate([1.75,15.75,.75]) rotate([180,0,0]) header_f(6,9);
|
|
color("silver") translate([11.5,11.5,1]) cube([2,3,.5]);
|
|
color("silver") translate([11.5,3,1]) cube([2,3,.5]);
|
|
}
|
|
translate([9.6,8.33,-1])
|
|
color("tan") hull() {
|
|
cylinder(d=1, h=3);
|
|
translate([5,0,0]) cylinder(d=1, h=3);
|
|
}
|
|
translate([7.36,2,-1]) rotate([0,0,90])
|
|
color("tan") hull() {
|
|
cylinder(d=1, h=3);
|
|
translate([5,0,0]) cylinder(d=1, h=3);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* odroid-hc4 oled holder */
|
|
module hc4_oled_holder(side,wallthick) {
|
|
|
|
adjust=.01;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
if(side == "top") {
|
|
translate([-1.85,-1.75,-4]) cube([32,5,4]);
|
|
translate([30.15,-3.75,1])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = 32)
|
|
polygon(points = [ [-wallthick/2,-wallthick/2],
|
|
[-4,wallthick],
|
|
[-4,2],
|
|
[-wallthick/2,2]]);
|
|
translate([-1.85,4,1])
|
|
rotate([0,-90,180])
|
|
linear_extrude(height = 32)
|
|
polygon(points = [ [-wallthick/2,-wallthick/2],
|
|
[-4,wallthick],
|
|
[-4,2],
|
|
[-wallthick/2,2]]);
|
|
}
|
|
if(side == "bottom") {
|
|
translate([-1.85,-1.75,0]) cube([32,5,4]);
|
|
translate([30.15,-3.75,1])
|
|
rotate([0,-90,0])
|
|
linear_extrude(height = 32)
|
|
polygon(points = [ [-wallthick/2,-wallthick/2],
|
|
[2,wallthick],
|
|
[2,2],
|
|
[-wallthick/2,2]]);
|
|
translate([-1.85,4,1])
|
|
rotate([0,-90,180])
|
|
linear_extrude(height = 32)
|
|
polygon(points = [ [-wallthick/2,-wallthick/2],
|
|
[2,wallthick],
|
|
[2,2],
|
|
[-wallthick/2,2]]);
|
|
}
|
|
}
|
|
if(side == "top") {
|
|
translate([-.5,0,wallthick-8]) cube([29.5,1.9,5]);
|
|
translate([(32.75/2-(15/2))-1.85,-adjust-3-1.75,-wallthick-2.5]) cube([15,12,wallthick+3]);
|
|
}
|
|
if(side == "bottom") {
|
|
translate([-.5,0,-adjust]) cube([29.5,1.42,5]);
|
|
translate([(32.75/2-(15/2))-1.85,-adjust-3-1.75,-adjust]) cube([15,12,8]);
|
|
translate([2.5,-adjust-3-1.75,-adjust]) cube([6,3,8]);
|
|
translate([12.5,adjust,10]) rotate([90,0,0]) cylinder(d=21, h=2);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
module hd_mount(hd,orientation,position,side) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(hd == 2.5) {
|
|
if(orientation == "portrait") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([0,14,0]) rotate([0,0,0]) hd25_vtab("right");
|
|
translate([0,90.6,0]) rotate([0,0,0]) hd25_vtab("right");
|
|
}
|
|
else { // right
|
|
translate([0,14,0]) rotate([0,0,0]) hd25_vtab("left");
|
|
translate([0,90.6,0]) rotate([0,0,0]) hd25_vtab("left");
|
|
}
|
|
}
|
|
else {
|
|
translate([-.5,14,0]) hd25_tab("left");
|
|
translate([-.5,90.6,0]) hd25_tab("left");
|
|
translate([70.35,14,0]) hd25_tab("right");
|
|
translate([70.35,90.6,0]) hd25_tab("right");
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([9.4,0,0]) rotate([0,0,90]) hd25_vtab("right");
|
|
translate([86,0,0]) rotate([0,0,90]) hd25_vtab("right");
|
|
}
|
|
else { // right
|
|
translate([9.4,0,0]) rotate([0,0,90]) hd25_vtab("left");
|
|
translate([86,0,0]) rotate([0,0,90]) hd25_vtab("left");
|
|
}
|
|
}
|
|
else {
|
|
translate([9.4,4.07-4.5,0]) rotate([0,0,90]) hd25_tab("left");
|
|
translate([86,4.07-4.5,0]) rotate([0,0,90]) hd25_tab("left");
|
|
translate([86,65.79+4.5,0]) rotate([0,0,90]) hd25_tab("right");
|
|
translate([9.4,65.79+4.5,0]) rotate([0,0,90]) hd25_tab("right");
|
|
}
|
|
}
|
|
}
|
|
if(hd == 3.5) {
|
|
if(orientation == "portrait") {
|
|
translate([-.5,28.5,0]) hd35_tab("left");
|
|
translate([-.5,69.75,0]) hd35_tab("left");
|
|
translate([-.5,130.1,0]) hd35_tab("left");
|
|
translate([101.6+.5,28.5,0]) hd35_tab("right");
|
|
translate([101.6+.5,69.75,0]) hd35_tab("right");
|
|
translate([101.6+.5,130.1,0]) hd35_tab("right");
|
|
}
|
|
if(orientation == "landscape") {
|
|
translate([16.9,-.5,0]) rotate([0,0,90]) hd35_tab("left");
|
|
translate([76.6,-.5,0]) rotate([0,0,90]) hd35_tab("left");
|
|
translate([118.5,-.5,0]) rotate([0,0,90]) hd35_tab("left");
|
|
translate([16.9,101.6-.5,0]) rotate([0,0,90]) hd35_tab("right");
|
|
translate([76.6,101.6-.5,0]) rotate([0,0,90]) hd35_tab("right");
|
|
translate([118.5,101.6-.5,0]) rotate([0,0,90]) hd35_tab("right");
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
module hd25_tab(side) {
|
|
|
|
width = 15;
|
|
l_width = 26;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adjust,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adjust,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([4.07,0,-adjust]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adjust,(width/2)-(length/2)-depth/2,3]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
translate([-height-adjust,(width/2)-(length/2)-depth/2,21]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adjust,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adjust,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([-4.07,0,-adjust]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adjust,(width/2)-(length/2)-depth/2,3]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
translate([-adjust,(width/2)-(length/2)-depth/2,21]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
module hd25_vtab(side) {
|
|
|
|
width = 15;
|
|
l_width = 16;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adjust,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adjust,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([3,0,-adjust]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adjust,1.5+(width/2)-(length/2)-depth/2,5.57]) rotate([90,90,90]) slot(hole,length,height+(2*adjust));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
translate([adjust,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adjust,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height-5],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
}
|
|
translate([-3,0,-adjust]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adjust,1.5+(width/2)-(length/2)-depth/2,5.57]) rotate([90,90,90]) slot(hole,length,height+(2*adjust));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
module hd35_tab(side) {
|
|
|
|
width = 15;
|
|
l_width = 46;
|
|
depth = 15;
|
|
height = 4;
|
|
fillet = 2;
|
|
hole = 3.6;
|
|
length = 3;
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(side == "left") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([-height,-depth/2,0]) cube([height,depth,height]);
|
|
|
|
translate([adjust,-5.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adjust,7.5,depth])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
|
|
}
|
|
translate([3.18,0,-adjust]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-height-adjust,(width/2)-(length/2)-depth/2,6.35]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
translate([-height-adjust,(width/2)-(length/2)-depth/2,38.35]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
}
|
|
}
|
|
if(side == "right") {
|
|
difference() {
|
|
union() {
|
|
translate([height,-depth/2,0]) rotate([0,-90,0])
|
|
slab_r([l_width,depth,height], [fillet,fillet,fillet,fillet]);
|
|
translate([0,-depth/2,0]) cube([height,depth,height]);
|
|
|
|
translate([adjust,-7.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
translate([adjust,5.5,depth])
|
|
rotate([90,0,180])
|
|
linear_extrude(height = 2)
|
|
polygon(points = [ [-height,height+20],
|
|
[-depth+4,-depth],
|
|
[-height,-depth]]);
|
|
|
|
}
|
|
translate([-3.18,0,-adjust]) rotate([0,0,0]) cylinder(d=hole, h=3);
|
|
translate([-adjust,(width/2)-(length/2)-depth/2,6.35]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
translate([-adjust,(width/2)-(length/2)-depth/2,38.35]) rotate([90,0,90]) slot(hole,length,height+(2*adjust));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
module hd_bottom_holes(hd,orientation,position,side,thick) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(hd == 2.5) {
|
|
if(orientation == "portrait") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([-3,14,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([-3,90.6,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
else {
|
|
// portrait 2.5" bottom screw holes
|
|
translate([3,14,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([3,90.6,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
}
|
|
else {
|
|
// portrait 2.5" bottom screw holes
|
|
translate([4.07,14,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([4.07,90.6,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([65.79,90.6,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([65.79,14,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
if(position == "vertical") {
|
|
if(side == "left") {
|
|
translate([9.4,-3,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([86,-3,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
else {
|
|
echo(side);
|
|
translate([9.4,3,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([86,3,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
}
|
|
else {
|
|
// landscape 2.5" bottom screw holes
|
|
translate([9.4,4.07,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([86,4.07,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([86,65.79,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([9.4,65.79,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
}
|
|
}
|
|
if(hd == 3.5) {
|
|
if(orientation == "portrait") {
|
|
// portrait 3.5" bottom screw holes
|
|
translate([3.18,41.28,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([3.18,85.73,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([3.18,117.48,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([98.43,41.28,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([98.43,85.73,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([98.43,117.48,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
if(orientation == "landscape") {
|
|
// landscape 3.5" bottom screw holes
|
|
translate([29.52,3.18,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([61.27,3.18,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([105.72,3.18,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([29.52,98.43,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([61.27,98.43,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
translate([105.72,98.43,0]) cylinder(d=3.6,h=thick+(adjust*2));
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* hard drive 2.5", height=drive height */
|
|
module hd25(height) {
|
|
|
|
hd25_x = 100;
|
|
hd25_y = 69.85;
|
|
hd25_z = height;
|
|
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
difference() {
|
|
color("LightGrey",.6) cube([hd25_x,hd25_y,hd25_z]);
|
|
|
|
// bottom screw holes
|
|
color("Black",.6) translate([9.4,4.07,-adjust]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,4.07,-adjust]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,65.79,-adjust]) cylinder(d=3,h=4);
|
|
color("Black",.6) translate([9.4,65.79,-adjust]) cylinder(d=3,h=4);
|
|
|
|
// side screw holes
|
|
color("Black",.6) translate([9.4,-adjust,3]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,-adjust,3]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([86,hd25_y+adjust,3]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([9.4,hd25_y+adjust,3]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
|
|
// connector opening
|
|
color("LightSlateGray",.6) translate([hd25_x-5,11,-1]) cube([5+adjust,32,5+adjust]);
|
|
}
|
|
}
|
|
|
|
|
|
/* hard drive 3.5" */
|
|
module hd35() {
|
|
|
|
hd35_x = 147;
|
|
hd35_y = 101.6;
|
|
hd35_z = 26.1;
|
|
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
difference() {
|
|
color("LightGrey",.6) cube([hd35_x,hd35_y,hd35_z]);
|
|
|
|
// bottom screw holes
|
|
color("Black",.6) translate([29.52,3.18,-adjust]) cylinder(d=3,h=3+adjust);
|
|
color("Black",.6) translate([61.27,3.18,-adjust]) cylinder(d=3,h=3+adjust);
|
|
color("Black",.6) translate([105.72,3.18,-adjust]) cylinder(d=3,h=3+adjust);
|
|
color("Black",.6) translate([29.52,98.43,-adjust]) cylinder(d=3,h=3+adjust);
|
|
color("Black",.6) translate([61.27,98.43,-adjust]) cylinder(d=3,h=3+adjust);
|
|
color("Black",.6) translate([105.72,98.43,-adjust]) cylinder(d=3,h=3+adjust);
|
|
|
|
// side screw holes
|
|
color("Black",.6) translate([16.9,-adjust,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([76.6,-adjust,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([118.5,-adjust,6.35]) rotate([-90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([118.5,hd35_y+adjust,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([76.6,hd35_y+adjust,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
color("Black",.6) translate([16.9,hd35_y+adjust,6.35]) rotate([90,0,0]) cylinder(d=3,h=3);
|
|
|
|
// connector opening
|
|
color("LightSlateGray",.6) translate([hd35_x-5,11,-1]) cube([5+adjust,32,5+adjust]);
|
|
|
|
}
|
|
}
|
|
|
|
|
|
/* 3.5" hdd to 2.5" hdd holder */
|
|
module hdd35_25holder(length) {
|
|
wallthick = 3;
|
|
floorthick = 2;
|
|
hd35_x = length; // 145mm for 3.5" drive
|
|
hd35_y = 101.6;
|
|
hd35_z = 12;
|
|
hd25_x = 100;
|
|
hd25_y = 69.85;
|
|
hd25_z = 9.5;
|
|
hd25_xloc = 2; // or (hd35_x-hd25_x)/2
|
|
hd25_yloc = (hd35_y-hd25_y)/2;
|
|
hd25_zloc = 9.5;
|
|
adjust = .1;
|
|
$fn=90;
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
translate([(hd35_x/2),(hd35_y/2),(hd35_z/2)])
|
|
cube_fillet_inside([hd35_x,hd35_y,hd35_z],
|
|
vertical=[3,3,3,3], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
translate([(hd35_x/2),(hd35_y/2),(hd35_z/2)+floorthick])
|
|
cube_fillet_inside([hd35_x-(wallthick*2),hd35_y-(wallthick*2),hd35_z],
|
|
vertical=[0,0,0,0], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
|
|
// end trim
|
|
translate([-adjust,5,wallthick+2]) cube([wallthick+(adjust*2),hd35_y-10,10]);
|
|
translate([hd35_x-wallthick-adjust,5,wallthick+2]) cube([wallthick+(adjust*2),hd35_y-10,10]);
|
|
|
|
// bottom vents
|
|
for ( r=[15:40:hd35_x-40]) {
|
|
for (c=[25:4:75]) {
|
|
translate ([r,c,-adjust]) cube([35,2,wallthick+(adjust*2)]);
|
|
}
|
|
}
|
|
}
|
|
// 2.5 hdd bottom support
|
|
translate([9.4+hd25_xloc,4.07+hd25_yloc,floorthick-adjust]) cylinder(d=8,h=4);
|
|
translate([86+hd25_xloc,4.07+hd25_yloc,floorthick-adjust]) cylinder(d=8,h=4);
|
|
translate([86+hd25_xloc,65.79+hd25_yloc,floorthick-adjust]) cylinder(d=8,h=4);
|
|
translate([9.4+hd25_xloc,65.79+hd25_yloc,floorthick-adjust]) cylinder(d=8,h=4);
|
|
|
|
// side nut holder support
|
|
translate([16,wallthick-adjust,7]) rotate([-90,0,0]) cylinder(d=10,h=3);
|
|
translate([76,wallthick-adjust,7]) rotate([-90,0,0]) cylinder(d=10,h=3);
|
|
if(length >= 120) {
|
|
translate([117.5,wallthick-adjust,7]) rotate([-90,0,0]) cylinder(d=10,h=3);
|
|
translate([117.5,hd35_y-wallthick-adjust,7]) rotate([90,0,0]) cylinder(d=10,h=3);
|
|
}
|
|
translate([76,hd35_y-wallthick-adjust,7]) rotate([90,0,0]) cylinder(d=10,h=3);
|
|
translate([16,hd35_y-wallthick-adjust,7]) rotate([90,0,0]) cylinder(d=10,h=3);
|
|
|
|
// bottom-side support
|
|
translate([wallthick,wallthick,floorthick-2]) rotate([45,0,0]) cube([hd35_x-(wallthick*2),3,3]);
|
|
translate([wallthick,hd35_y-wallthick+adjust,floorthick-2]) rotate([45,0,0]) cube([hd35_x-(wallthick*2),3,3]);
|
|
|
|
}
|
|
// bottom screw holes
|
|
translate([9.4+hd25_xloc,4.07+hd25_yloc,-adjust]) cylinder(d=3,h=(floorthick*3)+(adjust*2));
|
|
translate([86+hd25_xloc,4.07+hd25_yloc,-adjust]) cylinder(d=3,h=(floorthick*3)+(adjust*2));
|
|
translate([86+hd25_xloc,65.79+hd25_yloc,-adjust]) cylinder(d=3,h=(floorthick*3)+(adjust*2));
|
|
translate([9.4+hd25_xloc,65.79+hd25_yloc,-adjust]) cylinder(d=3,h=(floorthick*3)+(adjust*2));
|
|
|
|
// countersink holes
|
|
translate([9.4+hd25_xloc,4.07+hd25_yloc,-adjust]) cylinder(d1=6.5, d2=3, h=3);
|
|
translate([86+hd25_xloc,4.07+hd25_yloc,-adjust]) cylinder(d1=6.5, d2=3, h=3);
|
|
translate([86+hd25_xloc,65.79+hd25_yloc,-adjust]) cylinder(d1=6.5, d2=3, h=3);
|
|
translate([9.4+hd25_xloc,65.79+hd25_yloc,-adjust]) cylinder(d1=6.5, d2=3, h=3);
|
|
|
|
// side screw holes
|
|
translate([16,-adjust,7]) rotate([-90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([76,-adjust,7]) rotate([-90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([117.5,-adjust,7]) rotate([-90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([117.5,hd35_y+adjust,7]) rotate([90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([76,hd35_y+adjust,7]) rotate([90,0,0]) cylinder(d=3.6,h=7);
|
|
translate([16,hd35_y+adjust,7]) rotate([90,0,0]) cylinder(d=3.6,h=7);
|
|
|
|
// side nut trap
|
|
translate([16,wallthick-adjust,7]) rotate([-90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([76,wallthick-adjust,7]) rotate([-90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([117.5,wallthick-adjust,7]) rotate([-90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([117.5,hd35_y-wallthick-adjust,7]) rotate([90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([76,hd35_y-wallthick-adjust,7]) rotate([90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
translate([16,hd35_y-wallthick-adjust,7]) rotate([90,0,0]) cylinder(r=3.30,h=5,$fn=6);
|
|
}
|
|
}
|
|
|
|
|
|
/* odroid-hc4 oled */
|
|
module hc4_oled() {
|
|
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
oled_x = 28.5;
|
|
oled_y = 1.25;
|
|
oled_z = 48.6;
|
|
|
|
oled_open_x = 29;
|
|
oled_open_y = 1.5;
|
|
difference() {
|
|
union() {
|
|
// pcb board
|
|
color("Tan", 1) translate([0,0,0]) cube([oled_x,oled_y,oled_z]);
|
|
// oled
|
|
color("Black", 1) translate([.5,1.25,25.5]) cube([oled_x-1,.625,15]);
|
|
color("DarkGrey", 1) translate([.5,1.25,40.5]) cube([oled_x-1,.625,4]);
|
|
}
|
|
translate([2.8,0,46.7]) {
|
|
translate([-.6,1.26,0]) rotate([90,0,0])
|
|
hull() {
|
|
translate([1.2,0,0]) cylinder(d=1.8, h=1.25+(adjust*2));
|
|
cylinder(d=1.8, h=1.25+(adjust*2));
|
|
}
|
|
}
|
|
translate([25.7,0,46.7]) {
|
|
translate([-.6,1.26,0]) rotate([90,0,0])
|
|
hull() {
|
|
translate([1.2,0,0]) cylinder(d=1.8, h=1.25+(adjust*2));
|
|
cylinder(d=1.8, h=1.25+(adjust*2));
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
|
|
/* h2 network card */
|
|
module h2_netcard() {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
color("tan") translate ([0,0,0]) linear_extrude(height = 1) import("./dxf/hk-network-card.dxf");
|
|
color("goldenrod") translate([3.75,17.85,1-adjust]) cylinder(d=6,h=3);
|
|
color("goldenrod") translate([106,24.85,1-adjust]) cylinder(d=6,h=3);
|
|
}
|
|
translate([20.85,3.85,-adjust]) cylinder(d=3,h=4);
|
|
translate([3.75,17.85,-adjust]) cylinder(d=3,h=6);
|
|
translate([3.75,51.1,-adjust]) cylinder(d=3,h=4);
|
|
translate([20.15,43.85,-adjust]) cylinder(d=3,h=4);
|
|
translate([106,24.85,-adjust]) cylinder(d=3,h=6);
|
|
translate([96.5,3.85,-adjust]) cylinder(d=3,h=4);
|
|
}
|
|
rj45(26,-1,0,"bottom",1);
|
|
rj45(43,-1,0,"bottom",1);
|
|
rj45(60,-1,0,"bottom",1);
|
|
rj45(77,-1,0,"bottom",1);
|
|
place(30,25,0,6,6,0,"bottom") color("dimgray") translate([0,0,0]) cube([6,6,.8]);
|
|
place(47,25,0,6,6,0,"bottom") color("dimgray") translate([0,0,0]) cube([6,6,.8]);
|
|
place(64,25,0,6,6,0,"bottom") color("dimgray") translate([0,0,0]) cube([6,6,.8]);
|
|
place(79,25,0,6,6,0,"bottom") color("dimgray") translate([0,0,0]) cube([6,6,.8]);
|
|
place(56.5,41,0,5,9.75,0,"bottom") color("dimgray") translate([0,0,0]) cube([5,9.75,.8]);
|
|
for (i=[34.65:.5:48.5]) {
|
|
color("gold") translate([98,i,1]) cube([2,.25,.25]);
|
|
color("gold") translate([98,i,-.24]) cube([2,.25,.25]);
|
|
}
|
|
for (i=[51:.5:53]) {
|
|
color("gold") translate([98,i,1]) cube([2,.25,.25]);
|
|
color("gold") translate([98,i,-.24]) cube([2,.25,.25]);
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/* hk 3.5 lcd */
|
|
module hk35_lcd() {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
color("tan") translate ([0,0,0]) slab([95,56,1.7],3.5);
|
|
color("black",1) translate([10.5,0,1.7]) cube([74.75,54.5,4]);
|
|
color("white",1) translate([8.5,0,5.7-adjust]) cube([82.75,54.5,2]);
|
|
color("grey",1) translate([8.5,0,7.7-adjust]) cube([82.75,54.5,.8]);
|
|
color("dimgrey",1) translate([15,2,8.5-adjust]) cube([75.5,51,.25]);
|
|
}
|
|
translate([3.5,3.5,-adjust]) cylinder(d=3,h=6);
|
|
translate([3.5,52.5,-adjust]) cylinder(d=3,h=4);
|
|
}
|
|
translate([3,8.75,1.70-adjust]) momentary45x15();
|
|
translate([3,19.75,1.70-adjust]) momentary45x15();
|
|
translate([3,30.75,1.70-adjust]) momentary45x15();
|
|
translate([3,41.75,1.70-adjust]) momentary45x15();
|
|
color("black") translate([7.375,.8,-9+adjust]) cube([51.5,5,9]);
|
|
translate([92.5,4,adjust]) rotate([0,180,0]) header(5);
|
|
}
|
|
|
|
|
|
// hk console uart model
|
|
module hk_uart() {
|
|
|
|
size = [22,13,1.25];
|
|
adjust = .01;
|
|
$fn = 90;
|
|
color("tan") cube([size[0],size[1],size[2]]);
|
|
translate([6.5,.25,6.25-adjust]) rotate([90,180,-90]) uart_micro();
|
|
translate([6.75,3,-2+adjust])cylinder(d=1, 2);
|
|
translate([6.75,5.25,-2+adjust])cylinder(d=1, 2);
|
|
translate([6.75,7.5,-2+adjust])cylinder(d=1, 2);
|
|
translate([6.75,9.75,-2+adjust])cylinder(d=1, 2);
|
|
translate([23,2.75,1.25]) rotate([0,0,90]) usb_micro();
|
|
translate([13,4.5,1.25]) rotate([0,0,90]) ic([4,4,1]);
|
|
}
|
|
|
|
|
|
// hk vu7c lcd display
|
|
module hk_vu7c(gpio_ext, tabs) {
|
|
|
|
lcd_size = [164.85,100,5.48];
|
|
pcb_size = [184.6,75,1.6];
|
|
view_size = [155,88.5,.125]; // 154.21 x 85.92
|
|
hole = 3.2;
|
|
length = 24-hole;
|
|
depth = 2;
|
|
adjust = .1;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
color("lightgray") translate([0,0,pcb_size[2]+3.12]) cube(lcd_size);
|
|
if(tabs == true) {
|
|
color("black") translate([-(pcb_size[0]-lcd_size[0])/2,lcd_size[1]-pcb_size[1]-1,0])
|
|
cube(pcb_size);
|
|
}
|
|
else {
|
|
color("black") translate([0,lcd_size[1]-pcb_size[1]-1,0])
|
|
cube([pcb_size[0]-20,pcb_size[1],pcb_size[2]]);
|
|
}
|
|
color("black") translate([3,7.5,pcb_size[2]+3.12+lcd_size[2]-adjust]) cube(view_size);
|
|
// tabs
|
|
color("black") translate([51.8,99,0]) slab_r([8,8,1.6],[.1,4,4,.1]);
|
|
color("black") translate([104.8,99,0]) slab_r([8,8,1.6],[.1,4,4,.1]);
|
|
}
|
|
// slots
|
|
color("dimgray") translate([-(pcb_size[0]-lcd_size[0])/4,lcd_size[1]-1-7,-adjust])
|
|
rotate([0,0,-90]) slot(hole,length,depth);
|
|
color("dimgray") translate([-(pcb_size[0]-lcd_size[0])/4,lcd_size[1]-1-46,-adjust])
|
|
rotate([0,0,-90]) slot(hole,length,depth);
|
|
color("dimgray") translate([(pcb_size[0]-(pcb_size[0]-lcd_size[0])/2)-(pcb_size[0]-lcd_size[0])/4,
|
|
lcd_size[1]-1-7,-adjust]) rotate([0,0,-90]) slot(hole,length,depth);
|
|
color("dimgray") translate([(pcb_size[0]-(pcb_size[0]-lcd_size[0])/2)-(pcb_size[0]-lcd_size[0])/4,
|
|
lcd_size[1]-1-46,-adjust]) rotate([0,0,-90]) slot(hole,length,depth);
|
|
// holes
|
|
color("dimgray") translate([55.8,103.5,-adjust]) cylinder(d=hole, h=3);
|
|
color("dimgray") translate([108.8,103.5,-adjust]) cylinder(d=hole, h=3);
|
|
// pcb cuts
|
|
color("dimgray") translate([66,97.5,-adjust]) slab_r([20.3,4,2],[1,1,1,1]);
|
|
color("dimgray") translate([17.8,lcd_size[1]-pcb_size[1]-2,-adjust]) slab_r([78.8,6,2],[1,1,1,1]);
|
|
}
|
|
// components
|
|
translate([70+14.5,28.58,0]) rotate([180,0,180]) hdmi_a();
|
|
translate([47.49-1,42.09-.75,0]) rotate([180,0,90]) header_f(7,15);
|
|
translate([39.5,80.19-1,0]) rotate([180,0,90]) header_f(20,15);
|
|
translate([39.5,82.73-1,0]) rotate([180,0,90]) header_f(20,15);
|
|
translate([13.15+2.75-.25,36.71-1.25,0]) rotate([180,0,180]) header(7);
|
|
translate([23.58+2.5,74.42-1.25,0]) rotate([180,0,180]) header(5);
|
|
translate([98+2,26.04-2,0]) rotate([180,0,180]) pcb_pad(7);
|
|
color("dimgray") translate([16.25,69.4,-1.99]) cube([4,4,2]);
|
|
translate([18.5,58,-1.99]) cube([25,5.5,2]);
|
|
translate([80.5,52.5,-1.99]) cube([4.5,3.5,2]);
|
|
// gpio extension
|
|
if(gpio_ext == true) {
|
|
translate([57.37-1.25,94.93-1.25,0]) rotate([180,0,90]) header(20);
|
|
translate([57.37-1.25,92.39-1.25,0]) rotate([180,0,90]) header(20);
|
|
}
|
|
else {
|
|
translate([57.37-2,94.93-2,0]) rotate([180,0,90]) pcb_pad(20);
|
|
translate([57.37-2,92.39-2,0]) rotate([180,0,90]) pcb_pad(20);
|
|
}
|
|
translate([59,52.69,-1.59]) ic(9);
|
|
}
|
|
|
|
|
|
// hk vu8m lcd display
|
|
module hk_vu8m(brackets) {
|
|
$fn = 90;
|
|
|
|
m1_screw_spacing = 72;
|
|
|
|
body_size = [ 198, 133, 1.93];
|
|
glass_size = [ 195.73, 131.14, 1.60];
|
|
lcd_size = [ 184.63, 114.94, body_size[2] + 0.40];
|
|
view_size = [ 173.23, 108.64, .1];
|
|
|
|
rb = 5.25; // body edge radius
|
|
|
|
lcd_clearance = [0.15, 0.1, 0];
|
|
pcb_size = [14,24,1.6];
|
|
hole = 4.31;
|
|
spacer_size = [5.5, 6, 2.5, 5.5, 1, 0, 1, 1, 0, 0, 0];
|
|
|
|
// "body"
|
|
color([0.1,0.1,0.1])
|
|
difference(){
|
|
slab(body_size, rb);
|
|
lcd_space = lcd_size + 2*lcd_clearance;
|
|
translate([3.76 , 9 , -1]) cube(lcd_space);
|
|
translate([3.76 , 9 , -1]) cylinder(r=1.3, h=5);
|
|
translate([3.76 + lcd_space[0], 9 , -1]) cylinder(r=1.3, h=5);
|
|
translate([3.76 , 9 + lcd_space[1], -1]) cylinder(r=1.3, h=5);
|
|
translate([3.76 + lcd_space[0], 9 + lcd_space[1], -1]) cylinder(r=1.3, h=5);
|
|
// 8x holes in body
|
|
translate([ 44.5, 4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 51.5, 4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 183.5, 4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 190.5, 4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 44.5, body_size[1]-4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 51.5, body_size[1]-4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 183.5, body_size[1]-4.5, -1]) cylinder(d=hole, h=5);
|
|
translate([ 190.5, body_size[1]-4.5, -1]) cylinder(d=hole, h=5);
|
|
|
|
}
|
|
// 4x standoffs
|
|
color([0.6,0.6,0.6]) {
|
|
translate([ 44.5, 4.5, 0]) standoff(spacer_size);
|
|
translate([ 183.5, 4.5, 0]) standoff(spacer_size);
|
|
translate([ 44.5, body_size[1]-4.5, 0]) standoff(spacer_size);
|
|
translate([ 183.5, body_size[1]-4.5, 0]) standoff(spacer_size);
|
|
}
|
|
// LCD panel
|
|
color([0.6, 0.6, 0.65])
|
|
translate([3.76, 9, body_size[2]-lcd_size[2]]+lcd_clearance)
|
|
cube(lcd_size);
|
|
|
|
// Front glass
|
|
// It's actually thinner and glued, but for the sake of simplicity...
|
|
color([0.2, 0.2, 0.2], 0.9)
|
|
translate([0.86, 1.38, body_size[2] + 0.01])
|
|
slab(glass_size, rb);
|
|
|
|
// view area
|
|
color("dimgrey", 0.9)
|
|
translate([(glass_size[0]-view_size[0])/2, (glass_size[1]-view_size[1])/2, body_size[2] + glass_size[2]- 0.01])
|
|
slab(view_size, .1);
|
|
|
|
// PCB stub
|
|
color([0.1,0.1,0.1])
|
|
translate([20.5, 24.5, -3])
|
|
cube(pcb_size);
|
|
color("dimgrey")
|
|
translate([22.5, 26.5, -2])
|
|
cube([8,16,3]);
|
|
color([0.1,0.1,0.1])
|
|
translate([12, 21, -2])
|
|
cube([7,7,1.6]);
|
|
color([0.1,0.1,0.1])
|
|
translate([10, 34, -2])
|
|
cube([4,10,1.6]);
|
|
|
|
//Brackets
|
|
if(brackets) {
|
|
translate([44.5 - 7.5, body_size[1]/2 + m1_screw_spacing/2 - 7.5, - spacer_size[1] - 2]) u_bracket();
|
|
translate([44.5 - 7.5, body_size[1]/2 - m1_screw_spacing/2 + 7.5, - spacer_size[1] - 2 + 1.93]) rotate([180,0,0]) u_bracket();
|
|
|
|
//Screws
|
|
color([0.1,0.1,0.1]) {
|
|
translate([ 44.5, 4.5, -8]) rotate([180,0,0]) screw([3,7,0]);
|
|
translate([ 183.5, 4.5, -8]) rotate([180,0,0]) screw([3,7,0]);
|
|
translate([ 44.5, body_size[1]-4.5, -8]) rotate([180,0,0]) screw([3,7,0]);
|
|
translate([ 183.5, body_size[1]-4.5, -8]) rotate([180,0,0]) screw([3,7,0]);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Vu8M LCD U-BRACKET
|
|
module u_bracket() {
|
|
$fn= 30;
|
|
xi = 124;
|
|
xo = 154;
|
|
yi = 42;
|
|
yo = 42 + 12; // Outer vertical dimension
|
|
z = 1.93;
|
|
rlo = 21.3; // Lower outer corner radii
|
|
rli = 1; // Lower inner corner radii
|
|
ruo = 5.7; // Upper outer corner radii
|
|
rui = 5.7; // Upper inner corner radii
|
|
|
|
color([0.2,0.2,0.2])
|
|
difference() {
|
|
union() {
|
|
hull() {
|
|
translate([ rlo, rlo,0]) cylinder(r=rlo, h=z, $fn=100);
|
|
translate([xo - rlo, rlo,0]) cylinder(r=rlo, h=z, $fn=100);
|
|
}
|
|
hull() {
|
|
translate([ ruo, yo - ruo,0]) cylinder(r=ruo, h=z);
|
|
translate([ 15 - rui, yo - rui,0]) cylinder(r=rui, h=z);
|
|
translate([ 0, rlo,0]) cube([15,$fs,z]);
|
|
}
|
|
hull() {
|
|
translate([xo - ruo, yo - ruo,0]) cylinder(r=ruo, h=z);
|
|
translate([xo - 15 + rui, yo - rui,0]) cylinder(r=rui, h=z);
|
|
translate([xo - 15 , rlo,0]) cube([15,$fs,z]);
|
|
}
|
|
}
|
|
hull() {
|
|
translate([ 15 + rli, yo - yi + rli,-1]) cylinder(r=rli, h=z+2);
|
|
translate([xo - 15 - rli, yo - yi + rli,-1]) cylinder(r=rli, h=z+2);
|
|
translate([ 15, yo,-1]) cube([xi,$fs,z+2]);
|
|
}
|
|
translate([ 7.5, yo - 4, -1]) cylinder(d=3.21, h=z+2);
|
|
translate([xo - 7.5, yo - 4, -1]) cylinder(d=3.21, h=z+2);
|
|
hull() {
|
|
translate([ 7.5, yo - 9.6, -1]) cylinder(d=3.21, h=z+2);
|
|
translate([ 7.5, yo - 29.4, -1]) cylinder(d=3.21, h=z+2);
|
|
}
|
|
hull() {
|
|
translate([xo - 7.5, yo - 9.6, -1]) cylinder(d=3.21, h=z+2);
|
|
translate([xo - 7.5, yo - 29.4, -1]) cylinder(d=3.21, h=z+2);
|
|
}
|
|
translate([ 15 + 5.00, 8.25, -1]) cylinder(d=4.11, h=z+2);
|
|
translate([xo - 15 - 30.00, 8.25, -1]) cylinder(d=4.11, h=z+2);
|
|
translate([ 15 + 10.75, 2.50, -1]) cylinder(d=4.11, h=z+2);
|
|
translate([ 15 + 41.75, 2.50, -1]) cylinder(d=4.11, h=z+2);
|
|
translate([ 15 + 82.25, 2.50, -1]) cylinder(d=4.11, h=z+2);
|
|
translate([ 15 + 113.25, 2.50, -1]) cylinder(d=4.11, h=z+2);
|
|
}
|
|
}
|
|
|
|
// ODROID M1 2.5" SATA HDD mounting kit
|
|
module m1_hdmount() {
|
|
$fn = 30;
|
|
dims = [89.6, 38.5, 2.0];
|
|
holes = 4;
|
|
slots = [4.15, 3.3];
|
|
standoff_style = [5, 16, 0, 3, 25, 0, 0, 1, 0, 0, 0];
|
|
|
|
color([0.2,0.2,0.2])
|
|
difference() {
|
|
slab(dims, 4.0);
|
|
translate([ 3.1, 28.3, -1]) cylinder(d = holes, h = 4);
|
|
translate([ 86.5, 28.3, -1]) cylinder(d = holes, h = 4);
|
|
hull() {
|
|
translate([ 14.75, 10.15, -1]) cylinder(d=3.30, h=4);
|
|
translate([ 15.60, 10.15, -1]) cylinder(d=3.30, h=4);
|
|
}
|
|
hull() {
|
|
translate([ 75.60, 10.15, -1]) cylinder(d=3.30, h=4);
|
|
translate([ 76.45, 10.15, -1]) cylinder(d=3.30, h=4);
|
|
}
|
|
}
|
|
|
|
color([0.6,0.6,0.6]) {
|
|
translate ([ 3.1, 28.3 , 0]) rotate([ 0,0,0]) standoff(standoff_style);
|
|
translate ([ 86.5, 28.3 , 0]) rotate([ 0,0,0]) standoff(standoff_style);
|
|
}
|
|
color([0.1,0.1,0.1]) {
|
|
translate ([ 3.1, 28.3 , 2]) rotate([ 0,0,0]) screw([3, 7, 0]);
|
|
translate ([ 86.5, 28.3 , 2]) rotate([ 0,0,0]) screw([3, 7, 0]);
|
|
|
|
translate ([ 15.1, 10.15, 0]) rotate([180,0,0]) screw([3, 7, 0]);
|
|
translate ([ 76, 10.15, 0]) rotate([180,0,0]) screw([3, 7, 0]);
|
|
}
|
|
|
|
// "HDD HOLDER"
|
|
color([0.9, 0.9, 0.9])
|
|
translate([67,8,0]) rotate([180,0,180])
|
|
linear_extrude(height=0.01) text("HDD HOLDER",5);
|
|
}
|
|
|
|
|
|
// hdmi a female
|
|
module hdmi_a() {
|
|
size_x = 14.5;
|
|
size_y = 11.5;
|
|
|
|
translate([0,0,.75])
|
|
union() {
|
|
difference() {
|
|
color("silver") translate([0,0,0]) cube([size_x, size_y, 5.5]);
|
|
color("dimgray") translate([.5,-.1,.5]) cube([13.5, 11, 4.5]);
|
|
color("silver") translate([0,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=4, h=13.5,$fn=30);
|
|
color("silver") translate([14.5,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=4, h=13.5,$fn=30);
|
|
}
|
|
difference() {
|
|
union() {
|
|
color("silver") translate([0,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=4, h=11.5,$fn=30);
|
|
color("silver") translate([14.5,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=4, h=11.5,$fn=30);
|
|
}
|
|
color("silver") translate([0,-.2,0]) rotate ([-90,0,0])
|
|
cylinder(d=3, h=13.5,$fn=30);
|
|
color("silver") translate([14.5,-.2,0]) rotate ([-90,0,0])
|
|
cylinder(d=3, h=13.5,$fn=30);
|
|
color("silver") translate([-3,-1,-3]) cube([3,13.5,7.5]);
|
|
color("silver") translate([14.5,-1,-3]) cube([3,13.5,7.5]);
|
|
color("silver") translate([-1,-1,-3]) cube([16.5,13.5,3]);
|
|
}
|
|
color("black") translate([2.5,.5,2.25]) cube([9.25,10.5,1.5]);
|
|
}
|
|
}
|
|
|
|
|
|
// single row female headers
|
|
module header_f(pins, height) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
size_x = 2.5;
|
|
size_y = 2.5 * pins;
|
|
union() {
|
|
color("black") cube([size_x, size_y, height]);
|
|
for (i=[1:2.5:size_y]) {
|
|
color("dimgray") translate ([1,i,height-5+adjust]) cube([.64,.64,5]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// single row pcb pad
|
|
module pcb_pad(pads) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
size_x = 2.5;
|
|
size_y = 2.5 * pads;
|
|
union() {
|
|
for (i=[1:2.5:size_y]) {
|
|
difference() {
|
|
color("goldenrod") translate ([2,i+1,0]) cylinder(d=1.25, h=.125);
|
|
color("dimgray") translate([2,i+1,.01]) cylinder(d=.625, h=2);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// uart micro connector type
|
|
module uart_micro() {
|
|
size_x = 12.5;
|
|
size_y = 5;
|
|
union() {
|
|
difference() {
|
|
union() {
|
|
|
|
difference () {
|
|
color("white") translate([0,0,0]) cube([size_x,size_y,6]);
|
|
color("darkgray") translate([.5,.5,2]) cube([11.5,4,6]);
|
|
}
|
|
}
|
|
color("white") translate([12.5,0,-.5]) cube([2,6,7]);
|
|
color("white") translate([-1,0,-.5]) cube([1,6,7]);
|
|
color("white") translate([-1,5,-.5]) cube([14,2,7]);
|
|
color("darkgray") translate([-1,1.5,2]) cube([14,1,7]);
|
|
}
|
|
for (i=[2.5:2.5:10]) {
|
|
color("silver") translate ([i,3,.5]) cube([.6,.6,5]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// usb2 micro otg
|
|
module usb_micro() {
|
|
size_x = 7;
|
|
size_y = 4.5;
|
|
union() {
|
|
difference () {
|
|
color("silver") translate([0,0,0]) cube([size_x, size_y, 3.5]);
|
|
color("dimgray") translate([.5,-.1,.5]) cube([6, 3.5, 2.5]);
|
|
color("silver") translate([0,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=2.5, h=6.5,$fn=30);
|
|
color("silver") translate([7,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=2.5, h=6.5,$fn=30);
|
|
|
|
}
|
|
difference() {
|
|
union() {
|
|
color("silver") translate([0,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=2.5, h=4.5,$fn=30);
|
|
color("silver") translate([7,-.1,0]) rotate ([-90,0,0])
|
|
cylinder(d=2.5, h=4.5,$fn=30);
|
|
}
|
|
color("silver") translate([0,-.2,0]) rotate ([-90,0,0])
|
|
cylinder(d=1.25, h=6.5,$fn=30);
|
|
color("silver") translate([7,-.2,0]) rotate ([-90,0,0])
|
|
cylinder(d=1.25, h=6.5,$fn=30);
|
|
|
|
color("silver") translate([-3,-1,-3]) cube([3,6.5,7.5]);
|
|
color("silver") translate([7,-1,-3]) cube([3,6.5,7.5]);
|
|
color("silver") translate([0,-1,-3]) cube([9,6.5,3]);
|
|
color("silver") translate([-1,-1,-3]) cube([9,6.5,3]);
|
|
}
|
|
color("black") translate([1.5,.5,1.25]) cube([4,3.5,1]);
|
|
}
|
|
}
|
|
|
|
|
|
// rj45 single socket
|
|
module rj45(x,y,rotation,side,pcbsize_z) {
|
|
size_x = 15.9;
|
|
size_y = 21.3;
|
|
place(x,y,0,size_x,size_y,rotation,side)
|
|
union() {
|
|
difference () {
|
|
color("lightgray") translate([0,0,0]) cube([size_x, size_y, 13.5]);
|
|
color("darkgray") translate([1.5,-1,1.5]) cube([13, 19.5, 8]);
|
|
color("darkgray") translate([5.5,-2,7]) cube([5, 19.5, 5]);
|
|
}
|
|
color("green") translate([2,-.1,10]) cube([3, 2, 2]);
|
|
color("orange") translate([11,-.1,10]) cube([3, 2, 2]);
|
|
}
|
|
}
|
|
|
|
|
|
// momentary_4.5x4.5x1.5 button
|
|
module momentary45x15() {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
size_x = 4.5;
|
|
size_y = 4.5;
|
|
size_z = 3.1;
|
|
union() {
|
|
color("black") translate([0,0,0]) cube([size_x,size_y,3]);
|
|
color("silver") translate([0,0,3-adjust]) cube([size_x,size_y,.1]);
|
|
color("black") translate([2.25,2.25,3.1-adjust]) cylinder(d=2.35,h=1.50);
|
|
color("black") translate([.75,.75,3]) sphere(d=.75);
|
|
color("black") translate([.75,3.75,3]) sphere(d=.75);
|
|
color("black") translate([3.75,.75,3]) sphere(d=.75);
|
|
color("black") translate([3.75,3.75,3]) sphere(d=.75);
|
|
}
|
|
}
|
|
|
|
|
|
// single row headers
|
|
module header(pins) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
size_x = 2.5;
|
|
size_y = 2.5 * pins;
|
|
union() {
|
|
color("black") translate([0,0,0]) cube([size_x, size_y, 2.5]);
|
|
for (i=[1:2.5:size_y]) {
|
|
color("silver") translate ([1,i,2.5]) cube([.64,.64,5]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// gpio 12 enclosed header
|
|
module encl_header_12() {
|
|
size_x = 19.5;
|
|
size_y = 5.5;
|
|
union() {
|
|
difference () {
|
|
color("black") translate([0,0,0]) cube([size_x,size_y,6.25]);
|
|
color ("dimgray") translate ([.5,.5,.6]) cube([18.5,4.5,5.75]);
|
|
}
|
|
for (i=[4.5:2:16]) {
|
|
color("silver") translate ([i,1.5,1]) cube([.5,.5,5]);
|
|
color("silver") translate ([i,3.5,1]) cube([.5,.5,5]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// micro connector type
|
|
module micro2pin() {
|
|
size_x = 7.5;
|
|
size_y = 3.75;
|
|
union() {
|
|
difference () {
|
|
color("white") translate([0,0,0]) cube([size_x,size_y,4.75]);
|
|
color("darkgray") translate([1.5,.5,1]) cube([4.5,2.75,6]);
|
|
color("white") translate([-.5,.75,-.5]) cube([1,2.5,6]);
|
|
color("white") translate([7,.75,-.5]) cube([1,2.5,6]);
|
|
color("darkgray") translate([2.25,-.5,1]) cube([3,2,6]);
|
|
}
|
|
color("silver") translate ([2.75,2,.5]) cube([.6,.6,4]);
|
|
color("silver") translate ([4.5,2,.5]) cube([.6,.6,4]);
|
|
}
|
|
}
|
|
|
|
|
|
// 3.5mm audio plug
|
|
module audio_jack35() {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
size_x = 6.5;
|
|
size_y = 13.5;
|
|
difference () {
|
|
union() {
|
|
color("dimgray") cube([size_x,size_y,3]);
|
|
color("dimgray") cube([size_x,5.6,4]);
|
|
color("dimgray") translate([size_x/2,0,2.25]) rotate([-90,0,0]) cylinder(d=4, h=size_y);
|
|
}
|
|
color("gray") translate([size_x/2,0,2.25]) rotate([-90,0,0]) cylinder(d=3, h=size_y+adjust);
|
|
}
|
|
}
|
|
|
|
|
|
// can capacitor
|
|
module capacitor(diameter, height) {
|
|
adjust = .01;
|
|
$fn = 90;
|
|
color("dimgray") rotate([0,0,0]) cylinder(d=diameter+.5, h=.5);
|
|
color("silver") translate([0,0,.5]) cylinder(d=diameter+.5, h=.5);
|
|
color("silver") translate([0,0,1]) cylinder(d=diameter, h=height-1);
|
|
}
|
|
|
|
|
|
// ic
|
|
module ic(size) {
|
|
color("dimgray") cube(size);
|
|
}
|
|
|
|
|
|
/* hk speakers */
|
|
module hk_speaker() {
|
|
|
|
spk_x = 44;
|
|
spk_y = 20;
|
|
spk_z = 98;
|
|
c_hole = 6;
|
|
i_dia = c_hole+3;
|
|
adjust = .1;
|
|
|
|
difference() {
|
|
translate([spk_x/2,spk_y/2,spk_z/2]) cube_fillet_inside([spk_x,spk_y,spk_z],
|
|
vertical=[0,0,0,0,0], top=[0,c_hole,0,c_hole], bottom=[0,c_hole,0,c_hole], $fn=90);
|
|
// speaker cone
|
|
translate([spk_x/2,-adjust,spk_z-72]) rotate([-90,0,0]) cylinder(d=36, h=.5);
|
|
|
|
// corner holes
|
|
translate([(c_hole/2)+2,-adjust,(c_hole/2)+2]) rotate([-90,0,0])
|
|
cylinder(d=c_hole, h=spk_y+(2*adjust));
|
|
translate([(c_hole/2)+2,-adjust,spk_z-(c_hole/2)-2]) rotate([-90,0,0])
|
|
cylinder(d=c_hole, h=spk_y+(2*adjust));
|
|
translate([spk_x-(c_hole/2)-2,-adjust,spk_z-(c_hole/2)-2]) rotate([-90,0,0])
|
|
cylinder(d=c_hole, h=spk_y+(2*adjust));
|
|
translate([spk_x-(c_hole/2)-2,-adjust,(c_hole/2)+2]) rotate([-90,0,0])
|
|
cylinder(d=c_hole, h=spk_y+(2*adjust));
|
|
|
|
// lower left corner indent
|
|
translate([(c_hole/2)+2,-adjust,(c_hole/2)+2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([-adjust-1,-adjust,-adjust]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([adjust+.5,-adjust,-(i_dia/2)+adjust]) cube([i_dia+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([(c_hole/2)+2,-adjust+12+adjust,(c_hole/2)+2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([-adjust-1,-adjust+12+adjust,-adjust]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([adjust+.5,-adjust+12+adjust,-(i_dia/2)+adjust]) cube([i_dia+adjust,10+adjust,i_dia+adjust+.5]);
|
|
|
|
// upper left corner corner indent
|
|
translate([(c_hole/2)+2,-adjust,spk_z-(c_hole/2)-2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([-adjust-1,-adjust,spk_z-i_dia-.5]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([-adjust+.5,-adjust,spk_z-(i_dia/2)+adjust-.5]) cube([i_dia,10+adjust,i_dia+adjust+.5]);
|
|
translate([(c_hole/2)+2,-adjust+12,spk_z-(c_hole/2)-2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([-adjust-1,-adjust+12,spk_z-i_dia-.5]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([-adjust+.5,-adjust+12,spk_z-(i_dia/2)+adjust-.5]) cube([i_dia,10+adjust,i_dia+adjust+.5]);
|
|
|
|
// upper right corner corner indent
|
|
translate([spk_x-(c_hole/2)-2,-adjust,spk_z-(c_hole/2)-2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([spk_x-1-(i_dia/2),-adjust,spk_z-i_dia+adjust-.5]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([spk_x-.5-i_dia,-adjust,spk_z-(i_dia/2)+adjust-.5]) cube([i_dia,10+adjust,i_dia+adjust+.5]);
|
|
translate([spk_x-(c_hole/2)-2,-adjust+12,spk_z-(c_hole/2)-2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([spk_x-1-(i_dia/2),-adjust+12,spk_z-i_dia+adjust-.5]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([spk_x-.5-i_dia,-adjust+12,spk_z-(i_dia/2)+adjust-.5]) cube([i_dia,10+adjust,i_dia+adjust+.5]);
|
|
|
|
// lower right corner corner indent
|
|
translate([spk_x-(c_hole/2)-2,-adjust,(c_hole/2)+2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([spk_x-1-(i_dia/2),-adjust,-adjust]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([spk_x-.5-i_dia,-adjust,-(i_dia/2)+adjust]) cube([i_dia,10+adjust,i_dia+adjust+.5]);
|
|
translate([spk_x-(c_hole/2)-2,-adjust+12,(c_hole/2)+2]) rotate([-90,0,0])
|
|
cylinder(d=i_dia, h=10+adjust);
|
|
translate([spk_x-1-(i_dia/2),-adjust+12,-adjust]) cube([c_hole+adjust,10+adjust,i_dia+adjust+.5]);
|
|
translate([spk_x-.5-i_dia,-adjust+12,-(i_dia/2)+adjust]) cube([i_dia,10+adjust,i_dia+adjust+.5]);
|
|
}
|
|
// speaker cone
|
|
translate([spk_x/2,-adjust+46,spk_z-72]) {
|
|
difference() {
|
|
translate([0,0,0]) sphere(d=96, $fn=180);
|
|
translate([-50,-46,-50]) cube([100,100,100]);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/* hk boom bonnet */
|
|
module hk_boom(speakers,orientation) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
color("tan") translate ([0,0,0]) slab([60,35,1.6],.5);
|
|
if(speakers == true) {
|
|
color("tan") translate ([-31.5,0,0]) slab([31.5,35,1.6],.5);
|
|
color("white") translate ([-0.25,0,0]) cube([.5,35,1.6]);
|
|
color("tan") translate ([60,0,0]) slab([31.5,35,1.6],.5);
|
|
color("white") translate ([60,0,0]) cube([.5,35,1.6]);
|
|
}
|
|
}
|
|
// pcb holes
|
|
color("tan") translate([3.5,3.5,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([3.5,31.5,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([56.5,3.5,-adjust]) cylinder(d=3,h=4);
|
|
color("tan") translate([56.5,31.5,-adjust]) cylinder(d=3,h=4);
|
|
if(speakers == true) {
|
|
// left
|
|
color("tan") translate([-28,3.5,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([-28,31.5,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([-3.5,3.5,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([-3.5,31.5,-adjust]) cylinder(d=3,h=6);
|
|
// right
|
|
color("tan") translate([64.5,3.5,-adjust]) cylinder(d=3,h=4);
|
|
color("tan") translate([64.5,31.5,-adjust]) cylinder(d=3,h=4);
|
|
color("tan") translate([88,3.5,-adjust]) cylinder(d=3,h=4);
|
|
color("tan") translate([88,31.5,-adjust]) cylinder(d=3,h=4);
|
|
// left speaker openings
|
|
color("tan") translate([-31.5/2,35/2,-adjust]) cylinder(d=23.5, h=3);
|
|
color("tan") translate([-4-31.5/2,35/2+(23.5/2)-.5,-adjust]) cube([6,3,3]);
|
|
color("tan") translate([-4-31.5/2,35/2-(23.5/2)-2.5,-adjust]) cube([6,3,3]);
|
|
color("tan") translate([-4-31.5/2+(23.5/2)+1,-2+35/2,-adjust]) cube([6,3,3]);
|
|
// right speaker openings
|
|
color("tan") translate([60+(31.5/2),35/2,-adjust]) cylinder(d=23.5, h=3);
|
|
color("tan") translate([60-3+31.5/2,35/2+(23.5/2)-.5,-adjust]) cube([6,3,3]);
|
|
color("tan") translate([60-3+31.5/2,35/2-(23.5/2)-2.5,-adjust]) cube([6,3,3]);
|
|
color("tan") translate([60+1.25,-2+35/2,-adjust]) cube([6,3,3]);
|
|
}
|
|
}
|
|
// headers
|
|
translate([7.5,3.5,1.6-adjust]) rotate([0,0,-90]) header(3);
|
|
translate([16,3.5,1.6-adjust]) rotate([0,0,-90]) header(7);
|
|
translate([34,2,1.6-adjust]) rotate([0,0,0]) encl_header_12();
|
|
translate([40,13.5,1.6-adjust]) rotate([0,0,-90]) header(2);
|
|
translate([45.5,13.5,1.6-adjust]) rotate([0,0,-90]) header(2);
|
|
difference() {
|
|
union() {
|
|
color("dimgray", 1) translate([44.5,27,1.6+2]) rotate([0,0,0]) cylinder(d=16, h=3);
|
|
color("dimgray", 1) translate([44.5,27,1.6]) rotate([0,0,0]) cylinder(d=8, h=2);
|
|
}
|
|
color("dimgray", 1) translate([44.5,27,1.6+4]) rotate([0,0,0]) cylinder(d=12, h=3);
|
|
for(d=[5:10:360]) {
|
|
color("dimgray") translate([44.5+(16/2)*cos(d),27+(16/2)*sin(d),1.6+2-adjust]) cylinder(d=.75, h=3+2*adjust);
|
|
}
|
|
}
|
|
color("gray", 1) translate([45,27,1.6+4-adjust]) rotate([0,0,0]) cylinder(d=1.5, h=.25);
|
|
translate([3.75,13,1.6-adjust]) rotate([0,0,90]) micro2pin();
|
|
translate([56.5,20.5,1.6-adjust]) rotate([0,0,-90]) micro2pin();
|
|
translate([7.75,21.75,1.6-adjust]) audio_jack35();
|
|
translate([20,30,1.6-adjust]) capacitor(6.25,6.5);
|
|
translate([30,30,1.6-adjust]) capacitor(6.25,6.5);
|
|
translate([22,16,1.6-adjust]) ic([6.5,4.5,1]);
|
|
translate([10,12,1.6-adjust]) ic([4,4,1]);
|
|
translate([32.5,9,1.6-adjust]) ic([3.5,3,1]);
|
|
if(speakers == true && orientation == "rear") {
|
|
translate([-31.5/2,35/2,1.6]) boom_speaker();
|
|
translate([60+(31.5/2),35/2,1.6]) boom_speaker();
|
|
}
|
|
if(speakers == true && orientation == "front") {
|
|
translate([-31.5/2,35/2,0]) rotate([0,180,0]) boom_speaker();
|
|
translate([60+(31.5/2),35/2,0]) rotate([0,180,0]) boom_speaker();
|
|
}
|
|
}
|
|
|
|
|
|
// hk stero boom bonnet speaker with board
|
|
module hk_boom_speaker(side,speaker,pcb) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(pcb == true) {
|
|
difference() {
|
|
color("tan") slab([31.5,35,1.6],.5);
|
|
color("tan") translate([27.5,4,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([27.5,31,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([4,4,-adjust]) cylinder(d=3,h=6);
|
|
color("tan") translate([4,31,-adjust]) cylinder(d=3,h=6);
|
|
|
|
// speaker openings
|
|
color("tan") translate([(31.5/2),35/2,-adjust]) cylinder(d=23.5, h=3);
|
|
color("tan") translate([-3+31.5/2,35/2+(23.5/2)-.5,-adjust]) cube([6,3,3]);
|
|
color("tan") translate([-3+31.5/2,35/2-(23.5/2)-2.5,-adjust]) cube([6,3,3]);
|
|
if(side == "right") {
|
|
color("tan") translate([.5,-2+35/2,-adjust]) cube([6,3,3]);
|
|
}
|
|
if(side == "left") {
|
|
color("tan") translate([31.5/2+(23.5/2)-2.5,-2+35/2,-adjust]) cube([6,3,3]);
|
|
}
|
|
}
|
|
}
|
|
if(speaker == true && pcb == true) {
|
|
translate([(31.5/2),35/2,1.6]) boom_speaker();
|
|
}
|
|
if(speaker == true && pcb == false) {
|
|
boom_speaker();
|
|
}
|
|
}
|
|
|
|
|
|
// hk stero boom bonnet speakers
|
|
module boom_speaker() {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
difference() {
|
|
union() {
|
|
color("silver") translate([0,0,-8.5]) cylinder_fillet_inside(h=6.5, r=21.4/2,
|
|
top=0, bottom=2, $fn=90, fillet_fn=30, center=false);
|
|
color("dimgray") translate([0,0,2.5-adjust]) cylinder_fillet_inside(h=1, r=21.75/2,
|
|
top=1, bottom=0, $fn=90, fillet_fn=30, center=true);
|
|
|
|
difference() {
|
|
color("black") translate([0,0,-5-adjust]) cylinder(d=23.7, h=5);
|
|
for(d=[30:60:360]) {
|
|
color("dimgray") translate([(23.7/2)*cos(d),(23.7/2)*sin(d),-6-adjust]) cylinder(d=6, h=5+2*adjust);
|
|
}
|
|
}
|
|
color("black") translate([0,0,-adjust]) cylinder(d=27.8, h=2);
|
|
color("dimgray") translate([0,0,1]) cylinder(d=22.8, h=1);
|
|
color("dimgray") translate([0,0,1]) cylinder(d=17.5, h=1.25);
|
|
}
|
|
color("darkgray") translate([0,0,10.5]) sphere(d=23);
|
|
}
|
|
}
|
|
|
|
|
|
// hk boom bonnet speaker grill
|
|
module hk_boom_grill(style,thick) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(style == "dome" || style == "frame") {
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
translate([0,0,-23]) sphere(d=52.5);
|
|
translate([0,0,-25]) sphere(d=52.5);
|
|
translate([-30,-30,-60.5]) cube([60,60,60]);
|
|
for(c=[-14.5:3:24]) {
|
|
for(r=[-14.5:3:24]) {
|
|
translate([r,c,-1]) cube([2,2,40]);
|
|
}
|
|
}
|
|
}
|
|
if(style == "frame") {
|
|
difference() {
|
|
translate([0,0,-1.25]) cylinder(d=30.5, h=thick);
|
|
translate([0,0,-1.25-adjust]) cylinder(d=24, h=thick+2*adjust);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(style == "flat") {
|
|
difference() {
|
|
translate([0,0,0]) cylinder(d=24.5, h=thick);
|
|
for(c=[-14.5:3:24]) {
|
|
for(r=[-14.5:3:24]) {
|
|
translate([r,c,-1]) cube([2,2,thick+2]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// hk stero boom bonnet speaker holder
|
|
module boom_speaker_holder(style, tolerance) {
|
|
|
|
adjust = .01;
|
|
$fn = 90;
|
|
|
|
if(style == "friction") {
|
|
difference() {
|
|
translate([0,0,0]) cylinder(d=31, h=4);
|
|
translate([0,0,-adjust]) cylinder(d=28+tolerance, h=4+2*adjust);
|
|
translate([0,-1,-adjust]) cube([15,40,10], center=true);
|
|
}
|
|
difference() {
|
|
translate([0,0,0]) cylinder(d=28+tolerance, h=2);
|
|
translate([0,0,-adjust]) cylinder(d=28+tolerance-2, h=4+2*adjust);
|
|
translate([0,-1,-adjust]) cube([15,40,10], center=true);
|
|
}
|
|
}
|
|
|
|
if(style == "clamp") {
|
|
// bottom clamp
|
|
topthick = 2;
|
|
top_height = 14;
|
|
difference() {
|
|
cube([10.5,29,top_height-topthick]);
|
|
// speaker holders
|
|
translate([-1,14.5,14]) rotate([0,90,0]) cylinder(d=28, h=4.5);
|
|
translate([2,14.5,14]) rotate([0,90,0]) cylinder(d=24, h=6);
|
|
translate([4,14.5,14]) rotate([0,90,0]) cylinder(d=21.9, h=7.8);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// hk stero boom bonnet speaker clamp holder top
|
|
module boom_speaker_strap(side) {
|
|
|
|
topthick = 2;
|
|
top_height = 14;
|
|
adjust = .01;
|
|
$fn = 90;
|
|
// top clamp
|
|
difference() {
|
|
difference() {
|
|
union() {
|
|
translate([-3,14.5,top_height]) rotate([0,90,0]) cylinder(d=35,h=13.75);
|
|
if(side == "left") {
|
|
translate([5.4,16.5,top_height+(topthick/2)-1]) cube_fillet_inside([16.75,55,topthick],
|
|
vertical=[6,1,6,1], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
if(side == "right") {
|
|
translate([5.4,13,top_height+(topthick/2)-1]) cube_fillet_inside([16.75,55,topthick],
|
|
vertical=[1,6,1,1], top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
}
|
|
translate([10.75-adjust,14.5,top_height]) rotate([0,90,0]) cylinder(d=35,h=3);
|
|
}
|
|
translate([-9.25,0,top_height-topthick-adjust]) cube([20,29,topthick]);
|
|
difference() {
|
|
translate([-4.25,14.5,14]) rotate([0,90,0]) cylinder(d=28, h=15);
|
|
translate([-5.25,0,19]) cube([20,30,19.5]);
|
|
}
|
|
}
|
|
// speaker holders
|
|
translate([-3-adjust,14.5,14]) rotate([0,90,0]) cylinder(d=30.8, h=4.5);
|
|
translate([-3-adjust,14.5,14]) rotate([0,90,0]) cylinder(d=32.8, h=2);
|
|
translate([-2.75,14.5,14]) rotate([0,90,0]) cylinder(d=28, h=14.5);
|
|
translate([-4.55,-4,-4]) cube([20,37,topthick+15]);
|
|
|
|
if(side == "left") {
|
|
translate([4.15,-3.4,-adjust]) cylinder(d=3.2, h=50);
|
|
translate([4.15,-3.4,15]) cylinder(d=6, h=10);
|
|
translate([5.75,40,-adjust]) cylinder(d=3.2, h=50);
|
|
}
|
|
if(side == "right") {
|
|
translate([4.5,32.5,-adjust]) cylinder(d=3.2, h=50);
|
|
translate([4.5,32.5,15]) cylinder(d=6, h=10);
|
|
translate([10.5,-11,-adjust]) cylinder(d=3.2, h=50);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// hk stero boom bonnet volume ring
|
|
module boom_vring(tolerance) {
|
|
|
|
out_dia = 22;
|
|
in_dia = 16.15 + tolerance;
|
|
thick = 3;
|
|
nub = 1.25;
|
|
adjust = .01;
|
|
$fn = 90;
|
|
difference() {
|
|
color("black") translate([0,0,0])cylinder(d=out_dia, h=thick);
|
|
color("dimgray") translate([0,0,-adjust]) cylinder(d=in_dia, h=thick+2*adjust);
|
|
for(d=[5:10:360]) {
|
|
color("dimgray") translate([(out_dia/2)*cos(d),(out_dia/2)*sin(d),-adjust]) cylinder(d=nub, h=thick+2*adjust);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* access port and support */
|
|
module access_port(size,orientation) {
|
|
|
|
floorthick = size[2];
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(orientation == "portrait") {
|
|
difference() {
|
|
union() {
|
|
translate([0,0,0]) cube([size[0],size[1],size[2]]);
|
|
// access panel support
|
|
translate([(size[0]/2)+.25,size[1]-6.5,0]) cylinder(d=9,h=floorthick+(adjust*2)+5);
|
|
translate([(size[0]/2)-10,size[1]-11,floorthick-adjust]) cube([20,9.5,floorthick]);
|
|
translate([1,0,floorthick-adjust]) cube([size[0]-2,5,4.5]);
|
|
}
|
|
// access opening
|
|
translate([.5,6,-adjust]) cube([size[0]-1.15,size[1]-17,floorthick+(adjust*2)]);
|
|
translate([(size[0]/2)-5,size[1]-12,-adjust]) slab([10.5,5.5,floorthick],5.5);
|
|
translate([(size[0]/2)+.25,size[1]-6.5,floorthick+2])
|
|
cylinder(r=3.3,h=floorthick+(adjust*2)+5,$fn=6);
|
|
translate([(size[0]/2)+.25,size[1]-6.5,-adjust])
|
|
cylinder(d=3.2,h=floorthick+(adjust*2)+5);
|
|
translate([4,2+adjust,floorthick]) cube([7.75,3,2.75]);
|
|
translate([size[0]-13,2+adjust,floorthick]) cube([7.75,3,2.75]);
|
|
if(size[0] > 100) {
|
|
translate([(size[0]/2),2+adjust,floorthick]) cube([7.75,3,2.75]);
|
|
}
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
difference() {
|
|
union() {
|
|
translate([0,-1,0]) cube([size[0],size[1],size[2]]);
|
|
// access panel support
|
|
translate([size[0]-6.5,(size[1]/2)-.75,0]) cylinder(d=9,h=floorthick+(adjust*2)+5);
|
|
translate([size[0]-11,(size[1]/2)-10,floorthick-adjust]) cube([9.5,20,floorthick]);
|
|
translate([0,0,floorthick-adjust]) cube([5,size[1]-2,4.5]);
|
|
}
|
|
// access opening
|
|
translate([6,-.5,-adjust]) cube([size[0]-17,size[1]-1.15,floorthick+(adjust*3)]);
|
|
translate([size[0]-12,(size[1]/2)-6,-adjust]) slab([5.5,10.5,floorthick],5.5);
|
|
translate([size[0]-6.5,(size[1]/2)-.5,floorthick+2]) rotate([0,0,30])
|
|
cylinder(r=3.3,h=floorthick+(adjust*2)+5,$fn=6);
|
|
translate([size[0]-6.5,(size[1]/2)-.5,-adjust])
|
|
cylinder(d=3.2,h=floorthick+(adjust*2)+5);
|
|
translate([2+adjust,3,floorthick]) cube([3,8.25,2.75]);
|
|
translate([2+adjust,size[1]-13,floorthick]) cube([3,8.25,2.75]);
|
|
if(size[1] > 100) {
|
|
translate([2+adjust,(size[1]/2)-(7.75/2)-1.25,floorthick]) cube([3,7.75,2.5]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* access cover and support */
|
|
module access_cover(size,orientation) {
|
|
|
|
floorthick = size[2];
|
|
adjust = .01;
|
|
$fn = 90;
|
|
if(orientation == "portrait") {
|
|
difference() {
|
|
union() {
|
|
translate([1,6.25,0]) cube([size[0]-2.15,size[1]-17.5,floorthick]);
|
|
translate([(size[0]/2)-4.75,size[1]-12.25,0]) slab([10,5,floorthick], 5);
|
|
translate([1,6.25,floorthick-adjust]) cube([size[0]-2.15,6,floorthick]);
|
|
translate([4.25,3,floorthick]) cube([7.25,4,2]);
|
|
translate([size[0]-12.75,3,floorthick]) cube([7.25,4,2]);
|
|
if(size[0] > 100) {
|
|
translate([(size[0]/2)+.25,3,floorthick]) cube([7.25,4,2]);
|
|
}
|
|
}
|
|
translate([(size[0]/2)+.25,size[1]-6.5,-floorthick-adjust])
|
|
cylinder(d=3.2,h=(floorthick*2)+(adjust*2));
|
|
translate([(size[0]/2)+.25,size[1]-6.5,-floorthick-adjust+floorthick])
|
|
cylinder(d1=6, d2=3.2, h=floorthick);
|
|
}
|
|
}
|
|
if(orientation == "landscape") {
|
|
difference() {
|
|
union() {
|
|
translate([6.25,-.25,0]) cube([size[0]-17.5,size[1]-2,floorthick]);
|
|
translate([size[0]-12.25,(size[1]/2)-6,0]) slab([5,10,floorthick], 5);
|
|
translate([6.25,0,floorthick-adjust]) cube([6,size[1]-2.15,floorthick]);
|
|
translate([3.5+adjust,3.25,floorthick]) cube([4,7.25,2]);
|
|
translate([3.5+adjust,size[1]-12.75,floorthick]) cube([4,7.25,2]);
|
|
if(size[1] > 100) {
|
|
translate([3.5+adjust,(size[1]/2)-(7.75/2)-1,floorthick]) cube([4,7.25,2]);
|
|
}
|
|
}
|
|
translate([size[0]-6.5,(size[1]/2)-.75,-floorthick-adjust])
|
|
cylinder(d=3.2,h=(floorthick*2)+(adjust*2));
|
|
translate([size[0]-6.5,(size[1]/2)-.75,-floorthick-adjust+floorthick])
|
|
cylinder(d1=6, d2=3.2, h=floorthick);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* hdmi opening */
|
|
module hdmi_open(hdmi_style) {
|
|
|
|
if(hdmi_style == "hdmi_a") {
|
|
union() {
|
|
difference() {
|
|
translate([.25,-5,1]) cube([15,8,5.5]);
|
|
translate([0.5,-5.2,.5]) rotate ([-90,0,0]) cylinder(d=3, h=13.5,$fn=30);
|
|
translate([15,-5.2,.5]) rotate ([-90,0,0]) cylinder(d=3, h=13.5,$fn=30);
|
|
}
|
|
translate([2,-5,.5]) cube([11.5, 8, .5]);
|
|
}
|
|
}
|
|
if(hdmi_style == "hdmi_micro") {
|
|
union() {
|
|
difference() {
|
|
translate([-.25,-6,-.01]) cube([7,8,3.15]);
|
|
translate([-.25,-6.2,0]) rotate ([-90,0,0]) cylinder(d=1.5, h=9.5,$fn=30);
|
|
translate([6.75,-6.2,0]) rotate ([-90,0,0]) cylinder(d=1.5, h=9.5,$fn=30);
|
|
}
|
|
}
|
|
}
|
|
if(hdmi_style == "hdmi_mini") {
|
|
union() {
|
|
difference() {
|
|
translate([-.25,-6,-.01]) cube([11.5,8,3.5]);
|
|
translate([-1,-6.2,-.5]) rotate ([-90,0,0]) cylinder(d=3, h=10,$fn=30);
|
|
translate([12.25,-6.2,-.5]) rotate ([-90,0,0]) cylinder(d=3, h=10,$fn=30);
|
|
}
|
|
}
|
|
}
|
|
if(hdmi_style=="dp_mini") {
|
|
size_x = 9;
|
|
size_y = 8;
|
|
union() {
|
|
difference() {
|
|
translate([-.25,-6,0]) cube([size_x, size_y, 5.75]);
|
|
translate([-7.5,-7,1]) rotate([0,45,0]) cube([size_x, size_y+2, 5.6]);
|
|
translate([10,-7,-5]) rotate([0,-45,0]) cube([size_x, size_y+2, 5.6]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* micro-usb opening */
|
|
module microusb_open() {
|
|
|
|
translate([0,0,.5])rotate([90,0,0])
|
|
hull() {
|
|
translate([6,1.5,-5]) cylinder(d=3.5,h=9);
|
|
translate([1,1.5,-5]) cylinder(d=3.5,h=9);
|
|
}
|
|
}
|
|
|
|
|
|
/* fan mask to create opening */
|
|
module fan_mask(size, thick, style) {
|
|
$fn=90;
|
|
|
|
if(style == 1) {
|
|
translate ([size/2,size/2,-1]) cylinder(h=thick+2, d=size-2);
|
|
// mount holes
|
|
translate ([size-4,size-4,-1]) cylinder(h=thick+2, d=3);
|
|
translate ([size-4,4,-1]) cylinder(h=thick+2, d=3);
|
|
translate ([4,size-4,-1]) cylinder(h=thick+2, d=3);
|
|
translate ([4,4,-1]) cylinder(h=thick+2, d=3);
|
|
}
|
|
if(style == 2) {
|
|
inner = size == 30 ? 24 :
|
|
size == 40 ? 32 :
|
|
size == 50 ? 40 :
|
|
size == 60 ? 50 :
|
|
size == 70 ? 61.9 :
|
|
size == 80 ? 71.5 :
|
|
size * 0.8;
|
|
offset = (size - inner) / 2;
|
|
translate([0, 0, -1]) difference() {
|
|
union() {
|
|
// screw holes
|
|
translate([offset, offset, 0]) cylinder(d=3, h=thick+2);
|
|
translate([size-offset, offset, 0]) cylinder(d=3, h=thick+2);
|
|
translate([offset, size-offset, 0]) cylinder(d=3, h=thick+2);
|
|
translate([size-offset, size-offset, 0]) cylinder(d=3, h=thick+2);
|
|
|
|
// fan grates
|
|
translate_xy = size * 0.5;
|
|
base_ring_size = size * 0.9;
|
|
ring_height = thick + 2;
|
|
ring_diff_height = ring_height + 2;
|
|
for(i=[0:8:inner]) {
|
|
difference() {
|
|
translate([translate_xy, translate_xy, 0]) cylinder(d=base_ring_size - i, h=ring_height);
|
|
translate([translate_xy, translate_xy, -1]) cylinder(d=base_ring_size - i - 4, h=ring_diff_height);
|
|
}
|
|
}
|
|
}
|
|
// cross bars
|
|
translate([0, (size*0.5)-1.5, -1]) cube([size, 3, 12]);
|
|
translate([(size*0.5)-1.5,0, -1]) cube([3, size, 12]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* mask module */
|
|
module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,pcb_z) {
|
|
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
// hdmi opening
|
|
if(type == "hdmi_a" && side == "bottom") {
|
|
place(loc_x,loc_y-1,loc_z-pcb_z,15,11.5,rotation,side) hdmi_open("hdmi_a");
|
|
}
|
|
if(type == "hdmi_a" && side == "top" && rotation == 0) {
|
|
place(loc_x-.675,loc_y,loc_z+.25,15,11.5,rotation,side) hdmi_open("hdmi_a");
|
|
}
|
|
if(type == "hdmi_a" && side == "top" && rotation == 90) {
|
|
place(loc_x-1,loc_y,loc_z,15,11.5,rotation,side) hdmi_open("hdmi_a");
|
|
}
|
|
if(type == "hdmi_a" && side == "top" && rotation == 180) {
|
|
place(loc_x,loc_y+1,loc_z,15,11.5,rotation,side) hdmi_open("hdmi_a");
|
|
}
|
|
if(type == "hdmi_a" && side == "top" && rotation == 270) {
|
|
place(loc_x+1,loc_y-.5,loc_z,15,11.5,rotation,side) hdmi_open("hdmi_a");
|
|
}
|
|
// hdmi micro opening
|
|
if(type == "hdmi_micro" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,7.25,6.5,rotation,side) hdmi_open("hdmi_micro");
|
|
}
|
|
if(type == "hdmi_micro" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,7.25,6.5,rotation,side) hdmi_open("hdmi_micro");
|
|
}
|
|
if(type == "hdmi_micro" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,7.25,6.5,rotation,side) hdmi_open("hdmi_micro");
|
|
}
|
|
if(type == "hdmi_micro" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,7.25,6.5,rotation,side) hdmi_open("hdmi_micro");
|
|
}
|
|
// hdmi mini opening
|
|
if(type == "hdmi_mini" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,11.5,8,rotation,side) hdmi_open("hdmi_mini");
|
|
}
|
|
if(type == "hdmi_mini" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,11.5,8,rotation,side) hdmi_open("hdmi_mini");
|
|
}
|
|
if(type == "hdmi_mini" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,11.5,8,rotation,side) hdmi_open("hdmi_mini");
|
|
}
|
|
if(type == "hdmi_mini" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,11.5,8,rotation,side) hdmi_open("hdmi_mini");
|
|
}
|
|
// dp mini opening
|
|
if(type == "dp_mini" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,9,8,rotation,side) hdmi_open("dp_mini");
|
|
}
|
|
if(type == "dp_mini" && rotation == 90) {
|
|
place(loc_x,loc_y-.5,loc_z,9,8,rotation,side) hdmi_open("dp_mini");
|
|
}
|
|
if(type == "dp_mini" && rotation == 180) {
|
|
place(loc_x-.5,loc_y+6,loc_z,9,8,rotation,side) hdmi_open("dp_mini");
|
|
}
|
|
if(type == "dp_mini" && rotation == 270) {
|
|
place(loc_x+6,loc_y,loc_z,9,8,rotation,side) hdmi_open("dp_mini");
|
|
}
|
|
// power plug openings
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,7,7,rotation,side)
|
|
translate([3.5,2,6.5]) rotate([90,0,0]) cylinder(d=7, h=8);
|
|
}
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,7,7,rotation,side)
|
|
translate([3.5,2,6.5]) rotate([90,0,0]) cylinder(d=7, h=8);
|
|
}
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,7,7,rotation,side)
|
|
translate([3.5,-2.5,6.5]) rotate([90,0,0]) cylinder(d=7, h=8);
|
|
}
|
|
if(type == "pwr5.5_7.5x11.5" && rotation == 270) {
|
|
place(loc_x-2,loc_y,loc_z,7,7,rotation,side)
|
|
translate([3.5,-4.5,6.5]) rotate([90,0,0]) cylinder(d=7, h=8);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,3,3,rotation,side)
|
|
translate([2.75,2,2]) rotate([90,0,0]) cylinder(d=3, h=8);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,3,3,rotation,side)
|
|
translate([.25,2,2]) rotate([90,0,0]) cylinder(d=3, h=8);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,3,3,rotation,side)
|
|
translate([.5,-2.5,2]) rotate([90,0,0]) cylinder(d=3, h=8);
|
|
}
|
|
if(type == "pwr2.5_5x7.5" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,3,3,rotation,side)
|
|
translate([2.75,-2.5,2]) rotate([90,0,0]) cylinder(d=3, h=8);
|
|
}
|
|
// pwr5.5_10x10 opening
|
|
if(type == "pwr5.5_10x10" && rotation == 0) {
|
|
place(loc_x-.25,loc_y-6,loc_z,10.5,13.5,rotation,side)
|
|
cube([10.5,8,10.5]);
|
|
}
|
|
// pwr5.5_10x10 opening
|
|
if(type == "pwr5.5_10x10" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.25,loc_z,10.5,13.5,rotation,side)
|
|
cube([10.5,8,10.5]);
|
|
}
|
|
// pwr5.5_10x10 opening
|
|
if(type == "pwr5.5_10x10" && rotation == 180) {
|
|
place(loc_x-.25,loc_y+6,loc_z,10.5,13.5,rotation,side)
|
|
cube([10.5,8,10.5]);
|
|
}
|
|
// pwr5.5_10x10 opening
|
|
if(type == "pwr5.5_10x10" && rotation == 270) {
|
|
place(loc_x+6,loc_y-.25,loc_z,10.5,13.5,rotation,side)
|
|
cube([10.5,8,10.5]);
|
|
}
|
|
// pwr5.5_9.5x7 opening
|
|
if(type == "pwr5.5_9.5x7" && rotation == 0) {
|
|
place(loc_x-.25,loc_y-6,loc_z,10,13.5,rotation,side)
|
|
cube([10,8,7.5]);
|
|
}
|
|
// pwr5.5_9.5x7 opening
|
|
if(type == "pwr5.5_9.5x7" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.25,loc_z,10,13.5,rotation,side)
|
|
cube([10,8,7.5]);
|
|
}
|
|
// pwr5.5_9.5x7 opening
|
|
if(type == "pwr5.5_9.5x7" && rotation == 180) {
|
|
place(loc_x-.25,loc_y+6,loc_z,10,13.5,rotation,side)
|
|
cube([10,8,7.5]);
|
|
}
|
|
// pwr5.5_9.5x7 opening
|
|
if(type == "pwr5.5_9.5x7" && rotation == 270) {
|
|
place(loc_x+6,loc_y-.25,loc_z,10,13.5,rotation,side)
|
|
cube([10,8,7.5]);
|
|
}
|
|
// emmc storage
|
|
if(type == "emmc" && side == "bottom" && rotation == 0) {
|
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
|
}
|
|
if(type == "emmc" && side == "bottom" && rotation == 90) {
|
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
|
}
|
|
if(type == "emmc" && side == "bottom" && rotation == 180) {
|
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
|
}
|
|
if(type == "emmc" && side == "bottom" && rotation == 270) {
|
|
place(loc_x-.5,loc_y-.5,floorthick+adjust,14.5,19.5,rotation,side)
|
|
cube([14.5,19.5,floorthick+(2*adjust)]);
|
|
}
|
|
// sd storage
|
|
if(type == "sdcard" && side == "bottom" && rotation == 0) {
|
|
place(loc_x-1,loc_y-15,loc_z-pcb_z-1.75,12,15.5,rotation,side)
|
|
cube([13,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "bottom" && rotation == 90) {
|
|
place(loc_x+5,loc_y,loc_z-pcb_z-1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "bottom" && rotation == 180) {
|
|
place(loc_x,loc_y+5,loc_z-pcb_z-1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "bottom" && rotation == 270) {
|
|
place(loc_x+5,loc_y-18,loc_z-pcb_z-1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "top" && rotation == 0) {
|
|
place(loc_x,loc_y-15,loc_z+1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "top" && rotation == 90) {
|
|
place(loc_x-15,loc_y-.5,loc_z+1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "top" && rotation == 180) {
|
|
place(loc_x-.5,loc_y+5,loc_z+1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard" && side == "top" && rotation == 270) {
|
|
place(loc_x+5,loc_y,loc_z+1.75,12,15.5,rotation,side)
|
|
cube([12,15.5,2]);
|
|
}
|
|
if(type == "sdcard_i" && side == "bottom" && rotation == 0) {
|
|
place(loc_x,loc_y-18.5,floorthick+adjust+4,12,18.5,rotation,side)
|
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
|
}
|
|
if(type == "sdcard_i" && side == "bottom" && rotation == 90) {
|
|
place(loc_x+5.5,loc_y-.25,floorthick+adjust+4,12,18.5,rotation,side)
|
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
|
}
|
|
if(type == "sdcard_i" && side == "bottom" && rotation == 180) {
|
|
place(loc_x,loc_y+5.5,floorthick+adjust+4,12,18.5,rotation,side)
|
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
|
}
|
|
if(type == "sdcard_i" && side == "bottom" && rotation == 270) {
|
|
place(loc_x-18.5,loc_y-.25,floorthick+adjust+4,12,18.5,rotation,side)
|
|
cube([12,18.5,floorthick+(2*adjust)+4]);
|
|
}
|
|
if(type == "microsdcard" && side == "top" && rotation == 0) {
|
|
place(loc_x-.125,loc_y-12.1,loc_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "top" && rotation == 90) {
|
|
place(loc_x-12.1,loc_y+.125,loc_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "top" && rotation == 180) {
|
|
place(loc_x+.125,loc_y+12.1,loc_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "top" && rotation == 270) {
|
|
place(loc_x+12.1,loc_y-.125,loc_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "bottom" && rotation == 0) {
|
|
place(loc_x+.125,loc_y-12.1,loc_z-pcb_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "bottom" && rotation == 90) {
|
|
place(loc_x+12.1,loc_y-.125,loc_z-pcb_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "bottom" && rotation == 180) {
|
|
place(loc_x-.125,loc_y+12.1,loc_z-pcb_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
if(type == "microsdcard" && side == "bottom" && rotation == 270) {
|
|
place(loc_x-12.1,loc_y+.125,loc_z-pcb_z,13.2,14.1,rotation,side)
|
|
cube([13.5,14.1,2]);
|
|
}
|
|
// rj45 opening
|
|
if(type == "rj45_single" && rotation == 0) {
|
|
place(loc_x,loc_y-6,loc_z,16,17.5,rotation,side)
|
|
cube([16,8,14]);
|
|
}
|
|
if(type == "rj45_single" && rotation == 90) {
|
|
place(loc_x-6,loc_y,loc_z,16,17.5,rotation,side)
|
|
cube([16,8,14]);
|
|
}
|
|
if(type == "rj45_single" && rotation == 180) {
|
|
place(loc_x,loc_y+10,loc_z,16,17.5,rotation,side)
|
|
cube([16,8,14]);
|
|
}
|
|
if(type == "rj45_single" && rotation == 270) {
|
|
place(loc_x+9,loc_y,loc_z,16,17.5,rotation,side)
|
|
cube([16.5,8,14]);
|
|
}
|
|
// rj45 short opening
|
|
if(type == "rj45_single_short" && rotation == 0) {
|
|
place(loc_x,loc_y-6,loc_z,16,17.5,rotation,side)
|
|
cube([15,8,12]);
|
|
}
|
|
if(type == "rj45_single_short" && rotation == 90) {
|
|
place(loc_x-6,loc_y,loc_z,16,17.5,rotation,side)
|
|
cube([15,8,12]);
|
|
}
|
|
if(type == "rj45_single_short" && rotation == 180) {
|
|
place(loc_x,loc_y+10,loc_z,16,17.5,rotation,side)
|
|
cube([15,8,12]);
|
|
}
|
|
if(type == "rj45_single_short" && rotation == 270) {
|
|
place(loc_x+9,loc_y,loc_z,16,17.5,rotation,side)
|
|
cube([15,8,12]);
|
|
}
|
|
// micro usb opening
|
|
if(class == "usb2" && type == "micro" && rotation == 0 && side == "top") {
|
|
place(loc_x,loc_y-3,loc_z,8,3,rotation,side) microusb_open();
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 90 && side == "top") {
|
|
place(loc_x-3,loc_y-1,loc_z,8,3,rotation,side) microusb_open();
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 180 && side == "top") {
|
|
place(loc_x-1,loc_y+4.5,loc_z,8,3,rotation,side) microusb_open();
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 270 && side == "top") {
|
|
place(loc_x+4.5,loc_y,loc_z,8,3,rotation,side) microusb_open();
|
|
}
|
|
if(class == "usb2" && type == "micro" && rotation == 0 && side == "bottom") {
|
|
place(loc_x-1,loc_y-3,loc_z-1.25,8,3,rotation,side) microusb_open();
|
|
}
|
|
// double stack usb opening
|
|
if((type == "double_stacked_a" || type == "double_stacked_usb3-usbc") && rotation == 0) {
|
|
place(loc_x-1,loc_y-6,loc_z,15.5,16,rotation,side)
|
|
cube([15.5,8,16.5]);
|
|
}
|
|
if((type == "double_stacked_a" || type == "double_stacked_usb3-usbc") && rotation == 90) {
|
|
place(loc_x-6,loc_y-1.25,loc_z,15.5,16,rotation,side)
|
|
cube([15.5,8,16.5]);
|
|
}
|
|
if((type == "double_stacked_a" || type == "double_stacked_usb3-usbc") && rotation == 180) {
|
|
place(loc_x-1,loc_y+7.5,loc_z,15.5,16,rotation,side)
|
|
cube([15.5,8,16.5]);
|
|
}
|
|
if((type == "double_stacked_a" || type == "double_stacked_usb3-usbc") && rotation == 270) {
|
|
place(loc_x+6.25,loc_y-1,loc_z,15.5,16,rotation,side)
|
|
cube([15.5,8,16.5]);
|
|
}
|
|
// single vertical usb opening
|
|
if(type == "single_vertical_a" && rotation == 0) {
|
|
place(loc_x-.5,loc_y-6,loc_z,6.5,19.5,rotation,side)
|
|
cube([6.5,8,15]);
|
|
}
|
|
if(type == "single_vertical_a" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.25,loc_z,6.5,19.5,rotation,side)
|
|
cube([6.5,8,15]);
|
|
}
|
|
if(type == "single_vertical_a" && rotation == 180) {
|
|
place(loc_x-.5,loc_y+6,loc_z,6.5,19.5,rotation,side)
|
|
cube([6.5,8,15]);
|
|
}
|
|
if(type == "single_vertical_a" && rotation == 270) {
|
|
place(loc_x+6.5,loc_y,loc_z,6.5,19.5,rotation,side)
|
|
cube([6.5,8,15]);
|
|
}
|
|
// single horizontal usb opening
|
|
if(type == "single_horizontal_a" && rotation == 0) {
|
|
place(loc_x-.5,loc_y-6,loc_z,15,7.5,rotation,side)
|
|
cube([15,8,7.5]);
|
|
}
|
|
if(type == "single_horizontal_a" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.5,loc_z,15,7.5,rotation,side)
|
|
cube([15,8,7.5]);
|
|
}
|
|
if(type == "single_horizontal_a" && rotation == 180) {
|
|
place(loc_x-.5,loc_y+12.5,loc_z,15,7.5,rotation,side)
|
|
cube([15,8,7.5]);
|
|
}
|
|
if(type == "single_horizontal_a" && rotation == 270) {
|
|
place(loc_x+12.5,loc_y-.5,loc_z,15,7.5,rotation,side)
|
|
cube([15,8,7.5]);
|
|
}
|
|
// single horizontal usbc opening
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 0) {
|
|
place(loc_x+1.5,loc_y+2,loc_z+1.75,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(3.75,6,8);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 90) {
|
|
place(loc_x+2,loc_y+1.5,loc_z+1.75,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(3.75,6,8);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 180) {
|
|
place(loc_x+1.5,loc_y-3,loc_z+2,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(3.75,6,8);
|
|
}
|
|
if(class == "usbc" && type == "single_horizontal" && rotation == 270) {
|
|
place(loc_x-3,loc_y+1.5,loc_z+1.75,6,8,rotation,side)
|
|
rotate([90,0,0]) slot(3.75,6,8);
|
|
}
|
|
// ir opening
|
|
if(type == "ir_1" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
translate([3.5,2,7.5]) rotate([90,0,0]) cylinder(d=6, h=15);
|
|
}
|
|
if(type == "ir_1" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
translate([2.5,2,7.5]) rotate([90,0,0]) cylinder(d=6, h=15);
|
|
}
|
|
if(type == "ir_1" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
translate([2.5,5,6.5]) rotate([90,0,0]) cylinder(d=6, h=15);
|
|
}
|
|
if(type == "ir_1" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
translate([3.375,5,7.5]) rotate([90,0,0]) cylinder(d=6, h=15);
|
|
}
|
|
// switch opening
|
|
if(type == "slide_4x9" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
|
translate([0,-6,.25]) cube([9,8,4]);
|
|
}
|
|
if(type == "slide_4x9" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
|
translate([-5,-6,.25]) cube([9,8,4]);
|
|
}
|
|
if(type == "slide_4x9" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
|
translate([-5,-.5,.25]) cube([9,8,4]);
|
|
}
|
|
if(type == "slide_4x9" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,4,9,rotation,side)
|
|
translate([0,-.75,.25]) cube([9,8,4]);
|
|
}
|
|
// rj45-usb2_double opening
|
|
if(type == "rj45-usb2_double" && rotation == 0) {
|
|
place(loc_x,loc_y-6,loc_z,19,28,rotation,side)
|
|
cube([19,8,31]);
|
|
}
|
|
if(type == "rj45-usb2_double" && rotation == 90) {
|
|
place(loc_x-6,loc_y,loc_z,19,28,rotation,side)
|
|
cube([19,8,31]);
|
|
}
|
|
if(type == "rj45-usb2_double" && rotation == 180) {
|
|
place(loc_x,loc_y+6,loc_z,19,28,rotation,side)
|
|
cube([19,8,31]);
|
|
}
|
|
if(type == "rj45-usb2_double" && rotation == 270) {
|
|
place(loc_x+6,loc_y,loc_z,19,28,rotation,side)
|
|
cube([19,8,31]);
|
|
}
|
|
// rj45-usb3_double opening
|
|
if(type == "rj45-usb3_double" && rotation == 0) {
|
|
place(loc_x-.25,loc_y-6,loc_z,19.5,28,rotation,side)
|
|
cube([19.5,8,31.25]);
|
|
}
|
|
if(type == "rj45-usb3_double" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.25,loc_z,19.5,28,rotation,side)
|
|
cube([19.5,8,31.25]);
|
|
}
|
|
if(type == "rj45-usb3_double" && rotation == 180) {
|
|
place(loc_x+.25,loc_y+6,loc_z,19.5,28,rotation,side)
|
|
cube([19.5,8,31.25]);
|
|
}
|
|
if(type == "rj45-usb3_double" && rotation == 270) {
|
|
place(loc_x+6,loc_y-.25,loc_z,19.5,28,rotation,side)
|
|
cube([19.5,8,31.25]);
|
|
}
|
|
// out-in-spdif opening
|
|
if(type == "out-in-spdif" && rotation == 0) {
|
|
place(loc_x-.1,loc_y-6,loc_z,13,21.65,rotation,side)
|
|
cube([13,8,35.5]);
|
|
}
|
|
if(type == "out-in-spdif" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.1,loc_z,13,21.65,rotation,side)
|
|
cube([13,8,35.5]);
|
|
}
|
|
if(type == "out-in-spdif" && rotation == 180) {
|
|
place(loc_x-.2,loc_y+6,loc_z,13,21.65,rotation,side)
|
|
cube([13,8,35.5]);
|
|
}
|
|
if(type == "out-in-spdif" && rotation == 270) {
|
|
place(loc_x+6,loc_y-.1,loc_z,13,21.65,rotation,side)
|
|
cube([13,8,35.5]);
|
|
}
|
|
// dp-hdmi_a opening
|
|
if(type == "dp-hdmi_a" && rotation == 0) {
|
|
place(loc_x-.5,loc_y-6,loc_z,19,18,rotation,side)
|
|
cube([19,8,19.25]);
|
|
}
|
|
if(type == "dp-hdmi_a" && rotation == 90) {
|
|
place(loc_x-6,loc_y-.5,loc_z,19,18,rotation,side)
|
|
cube([19,8,19.25]);
|
|
}
|
|
if(type == "dp-hdmi_a" && rotation == 180) {
|
|
place(loc_x-.5,loc_y+6,loc_z,19,18,rotation,side)
|
|
cube([19,8,19.25]);
|
|
}
|
|
if(type == "dp-hdmi_a" && rotation == 270) {
|
|
place(loc_x+6,loc_y-.5,loc_z,19,18,rotation,side)
|
|
cube([19,8,19.25]);
|
|
}
|
|
// sata_encl_power opening
|
|
if(type == "sata_encl_power" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
|
translate([1,14,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
|
}
|
|
if(type == "sata_encl_power" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
|
translate([-1,14,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
|
}
|
|
if(type == "sata_encl_power" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
|
translate([-1,8,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
|
}
|
|
if(type == "sata_encl_power" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,38.5,7.5,rotation,side)
|
|
translate([1,8,3]) rotate([90,0,0]) slot(7.5,38.5,10);
|
|
}
|
|
// audio jack opening
|
|
if(type == "jack_3.5" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
|
union() {
|
|
translate([3.25,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([-.5,-.5,0]) cube([7.5,2.5,4.5]);
|
|
}
|
|
}
|
|
if(type == "jack_3.5" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
|
union() {
|
|
translate([4.1,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([.5,-.5,0]) cube([7.5,2.5,4.5]);
|
|
}
|
|
}
|
|
if(type == "jack_3.5" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
|
union() {
|
|
translate([4.1,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([.5,-5,0]) cube([7.5,2.5,4.5]);
|
|
}
|
|
}
|
|
if(type == "jack_3.5" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
|
union() {
|
|
translate([3,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([-.5,-5,0]) cube([7.5,2.5,4.5]);
|
|
}
|
|
}
|
|
// button opening
|
|
if(type == "momentary_6x6x4") {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
translate([3,3,4]) rotate([0,0,0]) cylinder(d=5, h=50);
|
|
}
|
|
if(type == "momentary_6x6x4_90" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
union() {
|
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
|
}
|
|
}
|
|
if(type == "momentary_6x6x4_90" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
union() {
|
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
|
}
|
|
}
|
|
if(type == "momentary_6x6x4_90" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
union() {
|
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
|
}
|
|
}
|
|
if(type == "momentary_6x6x4_90" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
union() {
|
|
translate([3,-2.5,3]) rotate([90,0,0]) cylinder(d=5, h=8);
|
|
translate([-.5,-3.75,0]) cube([7,2.5,6.5]);
|
|
}
|
|
}
|
|
if(type == "momentary_7x3x3_90" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,7,3,rotation,side)
|
|
translate([0,-6,0]) cube([7,8,3]);
|
|
}
|
|
if(type == "momentary_7x3x3_90" && rotation == 90) {
|
|
place(loc_x,loc_y,loc_z,7,3,rotation,side)
|
|
translate([0,-6,0]) cube([7,8,3]);
|
|
}
|
|
if(type == "momentary_7x3x3_90" && rotation == 180) {
|
|
place(loc_x,loc_y,loc_z,7,3,rotation,side)
|
|
translate([0,-6,0]) cube([7,8,3]);
|
|
}
|
|
if(type == "momentary_7x3x3_90" && rotation == 270) {
|
|
place(loc_x,loc_y,loc_z,7,3,rotation,side)
|
|
translate([0,-6,0]) cube([7,8,3]);
|
|
}
|
|
if(type == "audio_micro" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
|
translate([0,4,0]) cube([7.5,8,4]);
|
|
}
|
|
if(type == "m1_oem" && rotation == 0) {
|
|
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
|
union() {
|
|
translate([8.75,7.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([80,7.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([8.75,39.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([80,39.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([8.75,79.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([80,79.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([8.75,111.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
translate([80,111.5,-20]) rotate([0,0,90]) slot(3,3,8);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// punchout opening
|
|
module punchout(width,depth,gap,thick,fillet,shape) {
|
|
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
// slot punchout
|
|
if(shape == "slot") {
|
|
difference() {
|
|
translate([0,0,0]) slot(depth,width,thick);
|
|
translate([0,0,-adjust]) slot(depth-gap,width,thick+(2*adjust));
|
|
// cross ties
|
|
translate([-1,-(depth/2)-1,-adjust]) cube([2,depth+2,thick+(2*adjust)]);
|
|
translate([(width/2)-1-(width/4)+4,-(depth/2)-1,-adjust]) cube([2,depth+2,thick+(2*adjust)]);
|
|
translate([(width/2)-1+(width/4)-4,-(depth/2)-1,-adjust]) cube([2,depth+2,thick+(2*adjust)]);
|
|
translate([width-1,-(depth/2)-1,-adjust]) cube([2,depth+2,thick+(2*adjust)]);
|
|
}
|
|
}
|
|
if(shape == "rectangle") {
|
|
difference() {
|
|
translate([(width/2),(depth/2),thick/2])
|
|
cube_fillet_inside([width,depth,thick],
|
|
vertical=[fillet,fillet,fillet,fillet],
|
|
top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
translate([(width/2),(depth/2),(thick/2)-adjust])
|
|
cube_fillet_inside([width-gap,depth-gap,thick+(3*adjust)],
|
|
vertical=[fillet,fillet,fillet,fillet],
|
|
top=[0,0,0,0], bottom=[0,0,0,0], $fn=90);
|
|
// cross ties
|
|
translate([-1,(depth/2)-1,-adjust]) cube([gap+2,2,thick+(2*adjust)]);
|
|
translate([width-4,depth-gap-1,-adjust]) cube([2,gap+2,thick+(2*adjust)]);
|
|
translate([2,depth-gap-1,-adjust]) cube([2,gap+2,thick+(2*adjust)]);
|
|
translate([width-gap-1,(depth/2)-1,-adjust]) cube([gap+2,2,thick+(2*adjust)]);
|
|
translate([width-4,-1,-adjust]) cube([2,gap+2,thick+(2*adjust)]);
|
|
translate([2,-1,-adjust]) cube([2,gap+2,thick+(2*adjust)]);
|
|
}
|
|
}
|
|
if(shape == "round") {
|
|
difference() {
|
|
translate([(width/2),(width/2),0])
|
|
cylinder(d=width, h=thick);
|
|
translate([(width/2),(width/2),-adjust])
|
|
cylinder(d=width-gap, h=thick+2*adjust);
|
|
// cross ties
|
|
translate([-1,(depth/2)-1,-adjust]) cube([gap+2,2,thick+(2*adjust)]);
|
|
translate([(width/2)-1,depth-gap-1,-adjust]) cube([2,gap+2,thick+(2*adjust)]);
|
|
translate([width-gap-1,(depth/2)-1,-adjust]) cube([gap+2,2,thick+(2*adjust)]);
|
|
translate([(width/2)-1,-1,-adjust]) cube([2,gap+2,thick+(2*adjust)]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
// vent opening
|
|
module vent(width,length,height,gap,rows,columns,orientation) {
|
|
|
|
fillet = width/2;
|
|
adjust = .01;
|
|
$fn=90;
|
|
|
|
// vertical orientation
|
|
if(orientation == "vertical") { rotate([90,0,0])
|
|
for (r=[0:length+gap:rows*(length+gap)-1]) {
|
|
for (c=[0:width+(2*gap):(columns*(width+(2*gap)))-1]) {
|
|
translate ([c,r,-1]) cube([width,length,height]);
|
|
}
|
|
}
|
|
}
|
|
// horizontal orientation
|
|
if(orientation == "horizontal") {
|
|
for (r=[0:length+(2*gap):rows*(length+gap)]) {
|
|
for (c=[0:width+(2*gap):(columns*(width+(2*gap)))-1]) {
|
|
translate ([c,r,-1]) cube([width,length,height]);
|
|
}
|
|
}
|
|
}
|
|
}
|