Update and rename constants.i to constants..py

constants..py

@@ -0,0 +1,39 @@
+# wiringPi modes
+
+WPI_MODE_PINS = 0;
+WPI_MODE_GPIO = 1;
+WPI_MODE_GPIO_SYS = 2;
+WPI_MODE_PHYS = 3;
+WPI_MODE_PIFACE = 4;
+WPI_MODE_UNINITIALISED = -1;
+
+# Pin modes
+
+INPUT = 0;
+OUTPUT = 1;
+PWM_OUTPUT = 2;
+GPIO_CLOCK = 3;
+SOFT_PWM_OUTPUT = 4;
+SOFT_TONE_OUTPUT = 5;
+PWM_TONE_OUTPUT = 6;
+
+LOW = 0;
+HIGH = 1;
+
+# Pull up/down/none
+
+PUD_OFF = 0;
+PUD_DOWN = 1;
+PUD_UP = 2;
+
+# PWM
+
+PWM_MODE_MS = 0;
+PWM_MODE_BAL = 1;
+
+# Interrupt levels
+
+INT_EDGE_SETUP = 0;
+INT_EDGE_FALLING = 1;
+INT_EDGE_RISING = 2;
+INT_EDGE_BOTH = 3;

constants.i

@@ -1,39 +0,0 @@
-// wiringPi modes
-
-%constant int WPI_MODE_PINS = 0;
-%constant int WPI_MODE_GPIO = 1;
-%constant int WPI_MODE_GPIO_SYS = 2;
-%constant int WPI_MODE_PHYS = 3;
-%constant int WPI_MODE_PIFACE = 4;
-%constant int WPI_MODE_UNINITIALISED = -1;
-
-// Pin modes
-
-%constant int INPUT = 0;
-%constant int OUTPUT = 1;
-%constant int PWM_OUTPUT = 2;
-%constant int GPIO_CLOCK = 3;
-%constant int SOFT_PWM_OUTPUT = 4;
-%constant int SOFT_TONE_OUTPUT = 5;
-%constant int PWM_TONE_OUTPUT = 6;
-
-%constant int LOW = 0;
-%constant int HIGH = 1;
-
-// Pull up/down/none
-
-%constant int PUD_OFF = 0;
-%constant int PUD_DOWN = 1;
-%constant int PUD_UP = 2;
-
-// PWM
-
-%constant int PWM_MODE_MS = 0;
-%constant int PWM_MODE_BAL = 1;
-
-// Interrupt levels
-
-%constant int INT_EDGE_SETUP = 0;
-%constant int INT_EDGE_FALLING = 1;
-%constant int INT_EDGE_RISING = 2;
-%constant int INT_EDGE_BOTH = 3;