PD#SWPL-177679
Problem:
S6 usb high power.
speed-drop usb devices.
u2phy disconnect, squelch & edgedrv cali
Solution:
Optimise suspend logic by holding usb controller reset bit,
usb controller comb reset bit, usb2_phy_reset_bit, usb3_phy_reset_bit
.Besides:
1. reset usb3_apb_reset_bit and leave it set then modify corresponding
static regs for low power.
2. off unused usb3phy digital 100M clk.
3. Some quirky devices take >2s to turn on Rterm and begin polling
after resume, which is seen in the new clean usb3 phy. This leads
to wait_for_connected timeout when resuming. Add XHCI_MISSING_CAS
for xHC to workaround by asserting warm reset at resume.
The speed-drop usb devices TX maybe unstable at insertion, leading to
CDR KI overload. Delay freq tracking start point by modifying fr_en
delay 1us->300us.
Modify params in driver & dts.
Verify:
BL201.
Change-Id: I4d6139ecad79e8582ada818338fcf53a1d66b131
Signed-off-by: dian.shao <dian.shao@amlogic.com>
PD#SWPL-175417
Problem:
if any cmd resp timeout error in HS400es will not
continue to send the stop command.
Solution:
if there is cmd resp timeout error, we need to
send stop command additionally.
Verify:
txhd2
Change-Id: Id6652ab18e8e7b4281e06d8ff537986bdf60a31e
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-179542
Problem:
dirspi_async is designed for the ldim isr. Unfortunately, the
clk_set_rate and clk_get_rate it calls use a mutex lock, which
will lead to a mutex lock panic.
Solution:
Set spi speed in spi_setup only when controller_data use_dirspi=1
Pre-save the spi speed to avoid calling clk_get_rate
Verify:
t5m
Change-Id: I4fdf9d3be687901a5e8cffa1f838f99551b7d94a
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-177527
PD#SWPL-173088
PD#SWPL-173090
Problem:
The HPD signal may be come from HDMI HPD, but eARC has HPD
status from status bits
Solution:
Add reading EDID data in external plugin handler with mutex
No external plugout handler
Verify:
sc2, t7c
Test:
DRM-TX-38
Change-Id: I443e69aa6c8949a0d49df476108414431fd067d7
Signed-off-by: zongdong.jiao <zongdong.jiao@amlogic.com>
PD#SWPL-174974
Problem:
ldim require a hw interface dirspi_xfer to run in interrupt handle
Solution:
add a hw interface dirspi_xfer for ldim
Verify:
t5m ay301
Change-Id: I26e1a9890cc45ac0420d15ebea5e0a4bf2f18a56
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-168205
Problem:
lcevc data cannot be passed backward to vpp.
Solution:
add lcevc data path for pipeline.
Verify:
S7D
Change-Id: I656baa444025f4aaebfea67e19a011c152961c5f
Signed-off-by: zhenteng.tian <zhenteng.tian@amlogic.com>
PD#SWPL-176790
Problem:
S6: support read cali data
Solution:
S6: support read cali data
Verify:
S6 BL208
Change-Id: I3c3d7ba9f6b9ad619141ef0496b74c6648007d4a
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-177015
Problem:
recovery mode ldim not work;
different mcu have different init times.
Solution:
add ini parameter to set
hw init on stable delay.
Verify:
t3x
Change-Id: Ia74161c5f541a84ed820e72a3a78e769b63a13e7
Signed-off-by: zijie.lin <zijie.lin@amlogic.com>
PD#SWPL-101847
Problem:
drm write registers to rdma table one by one, due to rdma table update
and rdma manager flush to real register are out of sync, so we want to
creat a fake table, the fake table will copy to rdma table after
pipeline register write done, and then config rdma vsync
Solution:
add rdma table for drm osd registers, and it can dynamic switching by
this node /sys/class/drm/card0/crtc0/rdma_table_switch.
echo 1 > /sys/class/drm/card0/crtc0/rdma_table_switch switch off
echo 0 > /sys/class/drm/card0/crtc0/rdma_table_switch switch on
Verify:
T3x s7 s5
Test:
DRM-OSD-33
Change-Id: I053daa7daaab672f8b1e9fc2c38a2d60552d6288
Signed-off-by: wenlong.zhang <wenlong.zhang@amlogic.com>
PD#SWPL-166466
Problem:
add rotation feature for T3
Solution:
add rotation feature for T3
Verify:
t3
Change-Id: I5865ff4843c3acdada755f1529fd0c41a0da972a
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-176775
Problem:
scatter keep size need expand for vdin
Solution:
scatter user can set scatter keep size
by register scatter owner.
Verify:
ohm
Change-Id: I4be8af6dff0454cda9191666ec48cd1e03464127
Signed-off-by: Hao Shi <hao.shi@amlogic.com>
PD#SWPL-168620
Problem:
when osd3 on/off, core2a and core2c reset, but lut
updated fail; drm enable osd3 is one vsync earlier
then dv core2c
Solution:
1.drm set core2c lut when osd3 off->on
2.add force_toggle_once debug
Verify:
s5
Test:
s5
Change-Id: I5fe2a7abd1f4b887da5f32a655a24418fee86b64
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-176326
Problem:
s6 need to support 1080p120hz
Solution:
s6 need to support 1080p120hz
Verify:
S6
Test:
DRM-TX-130
Change-Id: I594f9671b36d3ea27c838bcf349a06cdcf2c707c
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-175926
Problem:
In DLG mode, display size is 3840x1080, aoi reg
is updated to 3840x1080, if disable/enable video
with no toggle, aoi reg will continue to be halved
Solution:
record the ori and updated AOI with new variables
Verify:
t5m
Change-Id: Idbc479a1d157fb35be131b7b9896e5cbf0ee3b67
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-174021
Problem:
screen anomaly in dma_buf and vf frame data composition using composer.
Solution:
1.clear src_vf after completing the composition of a frame of data.
2.fix the issue vicp cannot perform compositing on dma_buf.
Verify:
T3X
Change-Id: Ibf5492d823a1f1e8540feae7d8e275487a83710c
Signed-off-by: zhenteng.tian <zhenteng.tian@amlogic.com>
PD#SWPL-172361
Problem:
bypass di according to compression ratio.
Solution:
Modify vc flow to implement this requirement.
Verify:
t5m
Change-Id: Iace3aec5f202369882793a42c66a6b590211cf29
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
PD#SWPL-175588
Problem:
Need support s7d revb
Solution:
1, add clk set for revb;
2, use clk interface for clk set
Verify:
S7D bm201
Change-Id: I168a942f6796208dd4dff67a13f065be14a40f0c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-160981
Problem:
The CQE v1 does not support placing tasks in memory
and does not support data encryption.
Solution:
support CQE v2
Verify:
S7 ax201
Change-Id: I0737d7b2b9e955838a9f3294d1f5faf5fd84aa17
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-168860
Problem:
add vpp afd info for hdmi and atv
Solution:
1. add vpp afd info for hdmi and atv
2. add crop info into afd input param
Verify:
t5m
Change-Id: I882a2d59c8738e3844d0ccc72e41a267a4463c62
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-168849
PD#SWPL-168856
Problem:
AFD feature development
Solution:
vdin pass afd info to vpp
Verify:
t5m
Change-Id: I3264ef109e560590b3da1c5ae0d2ab6355c8ea19
Signed-off-by: haitao.liu <haitao.liu@amlogic.com>
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
dian.shao