PD#SWPL-155145
Problem:
Tracer prints abnormally when playing hdr10 plus video
Solution:
fix the abnormal printing problem of tracer when
playing hdr10 plus video
Verify:
SC2
S5
Test:
DRM-TX-91
Change-Id: Ia081b5667bfb01d540c497faa32479c38b084da9
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-141096
Problem:
add vdec unsupport format status use by media_hal
Solution:
add vdec unsupport format status use by media_hal
Verify:
txhd2
Change-Id: I2ecf78ac8e91ca912f331dc8a8ed8a6494610dd5
Signed-off-by: zehong.luo <zehong.luo@amlogic.com>
PD#SWPL-152701
Problem:
Currently,we found that the Sanitize/Erase command may take longer
than that on the first factory reset after flashing.
This will cause the Sanitize/Erase command to timeout before completing.
Solution:
Enable max timeout in the eMMC controller only for Sanitize.
This will allow the factory reset command to always complete
successfully with the drawback that on eMMC failures, the device will
be stuck unless rebooted.
Verify:
T5d
Change-Id: Ifea2edfe758b2f723f2c02d369468e8ba9629fe3
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-135758
Problem:
there is no s7 pwm tee driver
Solution:
add pwm tee driver
Verify:
s7 pxp
Change-Id: If1ec9b943340687173827e114df1207001ec2daa
Signed-off-by: junyi.zhao <junyi.zhao@amlogic.com>
PD#SWPL-151874
Problem:
need do aipq for T5M.
Solution:
modify code to support.
Verify:
T5M
Change-Id: Ief28052e1df8f67fff4e291319511d48ca6e2075
Signed-off-by: chen.xu <chen.xu@amlogic.com>
PD#SWPL-152551
Problem:
read chipid fail
Solution:
the chipid can be read by reading registers, but the register address is
set in DTS, which is prone to setting errors. It can be read through a
unified command, so there will be no previous problems.
Verify:
s905x2
Change-Id: I2019a7b8201dedec1f71a1edf09f9b51b730f5c2
Signed-off-by: Wanwei Jiang <wanwei.jiang@amlogic.com>
PD#SWPL-151864
Problem:
dv not support different size for two slice
Solution:
vpp config same size for vd1 two slice, it means that
dv input size is same for two slice and overlap is
fixed 96. dv output size maybe different, it depends
on vpp slice[0].hsize and slice[1].hsize
Verify:
t3x
Change-Id: I9986a84968e63939843996ae59d42d82c7707c67
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-151150
Problem:
flickering screen occurs while playing images during rotation.
Solution:
use ge2d on and off mode
to control the ratio between hardware processing and idle states
Verify:
t5
Change-Id: I4b45e5d9636310630092f09ddc5946a298277e1d
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-151748
Problem:
update hdmitx version for release.
sabrina u / kernel 5.15: hdmitx driver refactoring
sabrina release base from trunk11.20
audio mat question modified by cl:380286
Solution:
update hdmitx version
Verify:
verify on ohm
Test:
DRM-TX-40
Change-Id: Ie5ccf28423bbcecfdaddaf97a64fbfd692c3bf23
Signed-off-by: yahui.liu <yahui.liu@amlogic.com>
PD#SWPL-150936
Problem:
add mvrd to solve splash screen problem
Solution:
add mvrd to solve splash screen problem
Verify:
T5M
Change-Id: I44a4ee7bd6218cc86f943ed65a6e7336a0ec3a5b
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
PD#SWPL-150752
Problem:
repeat frame cause scene change early.
Solution:
modify new frame do scene change detection.
Verify:
t5m
Change-Id: I1c798fb8da3308c1778184ce751263062bdea81f
Signed-off-by: Huijuan Xiao <huijuan.xiao@amlogic.com>
PD#SWPL-144353
Problem:
During the mode switching process, when systemctrl writes the
node to close phy, the phy action is to close it immediately.
At this time, part of the video data may have been transmitted,
but the data is incomplete. At this time, rx got part of the image.
Some TVs did not perform frame dropping processing after getting part
of the data and parsed it, but the solution was wrong, which may
cause some display abnormalities.
Solution:
Referring to the processing method of the Apple box,
during the mode switching process, when systemctrl issues
a shutdown phy command, we will wait until vsync is
interrupted before shutting down the phy. At this time,
there is no video data transmission, which is relatively safe.
Verify:
ohm/T7
Test:
DRM-TX-67, DRM-TX-78, DRM-TX-79, DRM-TX-80, DRM-TX-81
Change-Id: I25162448f6d8f432bc48e0e038bac9a108bf8151
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#SWPL-149012
Problem:
KL driver should be able to check
if KL's fuse is okay without M2M or descrambler in REE.
Solution:
add etsi challenge-response function
Verify:
T5D
Change-Id: I8492896086ba3e6e4701ee4511794e803ed6d900
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-145570
Problem:
code refactoring to determine allocating
buffer's size between Gralloc and Codec2
Solution:
set parameters to node for gralloc
Verify:
txhd2
Change-Id: I5812b4bf23b2697ebaf33674b7cb2dcc88025eba
Signed-off-by: xinli.gao <xinli.gao@amlogic.com>
PD#SWPL-147512
Problem:
LDIM requires a strict timing sequence to match with the vsync signal
Solution:
SPICC supports vsync/line-n triggering control, Add a interface to
start/stop the vsync triggering transfer for LDIM
Porting from 5.4 1f62b7d1
Verify:
t3 t982
Change-Id: Ida2f63cbe318dceebbe97514e41a588e4ea143d4
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-147830
Problem:
sometime there are invalid config cause panel display abnormal
Solution:
add lcd config check function
1.lcd timing & tcon setting valid condition is decided by driver itself
2.display path timing_req_min is configured in dts, with alert_level
3.auto check after load lcd config, driver will be blocked by fatal err
4.manual cmd: echo check >/sys/class/lcd/debug
Verify:
am301
Change-Id: Iddd21f31f654ef99ae51465788c11a8d4a4e7446
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
ruofei.zhao