PD#SWPL-144353
Problem:
During the mode switching process, when systemctrl writes the
node to close phy, the phy action is to close it immediately.
At this time, part of the video data may have been transmitted,
but the data is incomplete. At this time, rx got part of the image.
Some TVs did not perform frame dropping processing after getting part
of the data and parsed it, but the solution was wrong, which may
cause some display abnormalities.
Solution:
Referring to the processing method of the Apple box,
during the mode switching process, when systemctrl issues
a shutdown phy command, we will wait until vsync is
interrupted before shutting down the phy. At this time,
there is no video data transmission, which is relatively safe.
Verify:
ohm/T7
Test:
DRM-TX-67, DRM-TX-78, DRM-TX-79, DRM-TX-80, DRM-TX-81
Change-Id: I25162448f6d8f432bc48e0e038bac9a108bf8151
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#SWPL-143601
Problem:
Need to bringup to console
Solution:
bringup to console for ab301
Verify:
tm2_ab301
Change-Id: I8f78a322da984eafa71ee21bee330eeccc224058
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-149012
Problem:
KL driver should be able to check
if KL's fuse is okay without M2M or descrambler in REE.
Solution:
add etsi challenge-response function
Verify:
T5D
Change-Id: I8492896086ba3e6e4701ee4511794e803ed6d900
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-145570
Problem:
code refactoring to determine allocating
buffer's size between Gralloc and Codec2
Solution:
set parameters to node for gralloc
Verify:
txhd2
Change-Id: I5812b4bf23b2697ebaf33674b7cb2dcc88025eba
Signed-off-by: xinli.gao <xinli.gao@amlogic.com>
PD#SWPL-147629
Problem:
no ioctl to get vrr range
Solution:
add ioctl to get vrr range
Verify:
t7c
Test:
DRM-TX-75
Change-Id: If6dab5d69b90ff63acf9617c61a452a6f25bd5d9
Signed-off-by: congyang.huang <congyang.huang@amlogic.com>
PD#SWPL-147512
Problem:
LDIM requires a strict timing sequence to match with the vsync signal
Solution:
SPICC supports vsync/line-n triggering control, Add a interface to
start/stop the vsync triggering transfer for LDIM
Porting from 5.4 1f62b7d1
Verify:
t3 t982
Change-Id: Ida2f63cbe318dceebbe97514e41a588e4ea143d4
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-147830
Problem:
sometime there are invalid config cause panel display abnormal
Solution:
add lcd config check function
1.lcd timing & tcon setting valid condition is decided by driver itself
2.display path timing_req_min is configured in dts, with alert_level
3.auto check after load lcd config, driver will be blocked by fatal err
4.manual cmd: echo check >/sys/class/lcd/debug
Verify:
am301
Change-Id: Iddd21f31f654ef99ae51465788c11a8d4a4e7446
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-147883
Problem:
IV slot does not need cleaning.
Solution:
IV slot is not clean.
Verify:
S1A
Change-Id: Id5f9bf3b95573cacb53de2e85796b10ce96ea7be
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-130883
Problem:
need to support inline partition encryption
Solution:
add support inline partition encryption in
spi nand driver
Verify:
s1a
Change-Id: Iadb9b9ae121939ef37a3abbd603a5eec17500739
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
PD#SWPL-125462
Problem:
open the HDMI2.0 ,the color of image is changed
Solution:
add vf info for colorimetry
Verify:
t5m kernel5.15
Change-Id: I126786f130d59fe2977ad8ea46b921aadd302d67
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-142875
Problem:
deadlock will happen in mark bad block process.
Solution:
add rsv-ops interface in rsv-manage to avoid deadlock.
Verify:
c3
Change-Id: I3841a8d3ca8c8f48142828b03ba9aefdf21adc62
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
PD#SWPL-141054
Problem:
hdmi in top1+top2 idk case fail
Solution:
1.add top1 rdmif config for hdmi
2.modify chroma fmt to p444 for hdmi
because vdin dw is 444-10
3.support variable_fps
4.update hist read id only when vf content changed, to match
hist delay with cmodel
Verify:
t3x
Change-Id: Ib5a9bbb266d2105f4729afa12347ee8eb80fae3a
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-138653
Problem:
need modify for aipq of GPU.
Solution:
modify for aipq of GPU.
Verify:
T5M
Change-Id: I2703b3bba282eae827255793e9a94b659b37dc37
Signed-off-by: chen.xu <chen.xu@amlogic.com>
PD#SWPL-144572
Problem:
dewarp/ge2d interrupt resource usage between RTOS and Linux
Solution:
To avoid interfering with RTOS clock/power/interrupt resources,
turn on and keep power/clk first.
Poll the status of rtos,
then turn off power/clk and register interrupt.
Verify:
T7C
Change-Id: Ie2a3ae61df97c594324ffb3dde68d41250c946e3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-145586
Problem:
When the vic of VSDB is stored first, the vic of video data block
is inserted at the end, and an error occurs in 420 capability map
Solution:
add SVD_VIC, used to store SVD in VDB, mapped with 420 CMDB
Verify:
S5/AX201-S928X
Test:
DRM-TX-44
Change-Id: I18b42e9c304b01b6712d9640f4bc08020595f305
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-145646
Problem:
Adds debugfs for codec status management.
Solution:
Add codec state module, mainly collect and
manage codec status information, and facilitate
the management of the configuration of each module.
Verify:
ohm
Change-Id: I8f877a954f9873c4aa4d632e007a67c0a41ff2b1
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-144627
Problem:
when kernel goes to early suspend, need keep the edid data
Solution:
Keep edid data during the suspend state. If there is HPD in
early suspend, there will update the EDID in the bottom of
hpd ISR
Verify:
ohm
Test:
DRM-TX-38
Change-Id: If1975a68da8c7431bb7867359bc5368b37dbc1f3
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-144474
Problem:
For fcc,don't need keep di_multi memory
Solution:
Decoder transfer fcc flag to DI.
Verify:
ohm
Change-Id: I37d1da0dc5c99dd086ee1291d403525a009bc64b
Signed-off-by: lele xiang <lele.xiang@amlogic.com>
PD#SWPL-143936
Problem:
show or hide video does not work
Solution:
add mute plane interface
Verify:
AP222
Test:
DRM-OSD-111
Change-Id: Ib5898c9a0bc3201d397a3a33a9c073f0799c3aee
Signed-off-by: linfang.zhao <linfang.zhao@amlogic.com>
PD#SWPL-143972
Problem:
when clac_tmds_clk > max_tmds_clk, only check whether
the edid support frl, not check the box frl capability
Solution:
add check the box frl capability
Verify:
s905x4
Test:
DRM-TX-42
Change-Id: I502b130c7fc613d020566af35438465c52ee3b60
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
donghui.wang