PD#SWPL-145570
Problem:
code refactoring to determine allocating
buffer's size between Gralloc and Codec2
Solution:
set parameters to node for gralloc
Verify:
txhd2
Change-Id: I5812b4bf23b2697ebaf33674b7cb2dcc88025eba
Signed-off-by: xinli.gao <xinli.gao@amlogic.com>
PD#SWPL-147629
Problem:
no ioctl to get vrr range
Solution:
add ioctl to get vrr range
Verify:
t7c
Test:
DRM-TX-75
Change-Id: If6dab5d69b90ff63acf9617c61a452a6f25bd5d9
Signed-off-by: congyang.huang <congyang.huang@amlogic.com>
PD#SWPL-147512
Problem:
LDIM requires a strict timing sequence to match with the vsync signal
Solution:
SPICC supports vsync/line-n triggering control, Add a interface to
start/stop the vsync triggering transfer for LDIM
Porting from 5.4 1f62b7d1
Verify:
t3 t982
Change-Id: Ida2f63cbe318dceebbe97514e41a588e4ea143d4
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-147883
Problem:
IV slot does not need cleaning.
Solution:
IV slot is not clean.
Verify:
S1A
Change-Id: Id5f9bf3b95573cacb53de2e85796b10ce96ea7be
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-130883
Problem:
need to support inline partition encryption
Solution:
add support inline partition encryption in
spi nand driver
Verify:
s1a
Change-Id: Iadb9b9ae121939ef37a3abbd603a5eec17500739
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
PD#SWPL-125462
Problem:
open the HDMI2.0 ,the color of image is changed
Solution:
add vf info for colorimetry
Verify:
t5m kernel5.15
Change-Id: I126786f130d59fe2977ad8ea46b921aadd302d67
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-142875
Problem:
deadlock will happen in mark bad block process.
Solution:
add rsv-ops interface in rsv-manage to avoid deadlock.
Verify:
c3
Change-Id: I3841a8d3ca8c8f48142828b03ba9aefdf21adc62
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
PD#SWPL-141054
Problem:
hdmi in top1+top2 idk case fail
Solution:
1.add top1 rdmif config for hdmi
2.modify chroma fmt to p444 for hdmi
because vdin dw is 444-10
3.support variable_fps
4.update hist read id only when vf content changed, to match
hist delay with cmodel
Verify:
t3x
Change-Id: Ib5a9bbb266d2105f4729afa12347ee8eb80fae3a
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-144572
Problem:
dewarp/ge2d interrupt resource usage between RTOS and Linux
Solution:
To avoid interfering with RTOS clock/power/interrupt resources,
turn on and keep power/clk first.
Poll the status of rtos,
then turn off power/clk and register interrupt.
Verify:
T7C
Change-Id: Ie2a3ae61df97c594324ffb3dde68d41250c946e3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-143936
Problem:
show or hide video does not work
Solution:
add mute plane interface
Verify:
AP222
Test:
DRM-OSD-111
Change-Id: Ib5898c9a0bc3201d397a3a33a9c073f0799c3aee
Signed-off-by: linfang.zhao <linfang.zhao@amlogic.com>
PD#TV-98016
Problem:
5.15 has old driver version.
Solution:
Back port some of the missing change from 5.4 and add CL370123
Verify:
T3X + RDK
Change-Id: I15c7d3bdb1e87aa95aaa4e8238bc4dcd2b5287b6
Signed-off-by: Song Zhao <song.zhao@amlogic.com>
PD#SWPL-141014
Problem:
txhd2 need to add media related thermal control
Solution:
1. add media cooling device. media module should call
media_cooling_register to register the cooling device.
and usually configure maxstate of the cooling device.
2. reconstruct cpucore cooling device.
Verify:
txhd2
Change-Id: I0576e0d91a3062b60f877a4e8577e4fe84e5f53b
Signed-off-by: Xingxing Wang <xingxing.wang@amlogic.com>
PD#SWPL-143291
Problem:
mute function will use in other module isr
Solution:
remove it,and set mute use fixed bit
Verify:
txhd2
Change-Id: I7f09f1ea1efb6269eef6422b7e5730ecdadc484e
Signed-off-by: hai.cao <hai.cao@amlogic.com>
PD#SWPL-138069
Problem:
dv 444 low-latency not convert to 422 will abnormal
Solution:
dv 444 low-latency need convert to 422
Verify:
t5w
Change-Id: Iff9d00a31d135334feb5bc5943f82426768f5e31
Signed-off-by: qiang.liu <qiang.liu@amlogic.com>
PD#SWPL-142519
Problem:
driver not add upper layer use format
Solution:
driver add upper layer use format
Verify:
t5w
Change-Id: I6c9ff0487453f5122ca51a2f47f47fc5b656b873
Signed-off-by: qiang.liu <qiang.liu@amlogic.com>
PD#SWPL-142295
Problem:
vpp mute control conflict
Solution:
control on or off by module self
Verify:
txhd2
Change-Id: Id3f35903c5c409793fd303d0086975434e83e137
Signed-off-by: hai.cao <hai.cao@amlogic.com>
PD#TV-89282
Problem:
HbbTV need more accurate position.
Solution:
Add two more ioctl to get the A/V pts/mono pair
Verify:
T5W + Sandia
Change-Id: I9bc5408d0b41b4429056e581a18646d16d44fe41
Signed-off-by: Song Zhao <song.zhao@amlogic.com>
PD#SWPL-135475
Problem:
txhd2 vdin1 hist uses the vdin0 hist register
Solution:
Open the clk of vdin1 and configure the hist related register
Verify:
txhd2
Change-Id: If86d6fbfd7a760e1a51db98aecce9c37c685687e
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-140211
Problem:
need update spinand info page.
Solution:
update new info page, for compatibility with A1 S1A C3.
Verify:
A1 S1A C3
Change-Id: I73ce561dc716aedd18ac2887af00fa912818794b
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
PD#SWPL-139694
Problem:
add more regs control in ddr cooling device
Solution:
add more regs control in ddr cooling device
Verify:
txhd2
Change-Id: I99c978d2034b3dcf01239752ce1a112f8e07afce
Signed-off-by: Xingxing Wang <xingxing.wang@amlogic.com>
PD#SWPL-139463
Problem:
add support for 240p.
Solution:
add support for 240p.
Verify:
txhd2
Change-Id: Id2a0e2dec3aad54143cf78a7ce9fbae0568291d0
Signed-off-by: yaoyu.xu <yaoyu.xu@amlogic.com>
PD#SWPL-125800
Problem:
ddr test
Solution:
modify ddr temperature control point
Verify:
txhd2
Change-Id: Icab99c885673981577e0545a8fbe5191f49f2e07
Signed-off-by: Xingxing Wang <xingxing.wang@amlogic.com>
PD#SWPL-137498
Problem:
1. need get partition from env
2. need get rsv info from env
Solution:
1. get partition from cmdline
2. get rsv info from cmdline
Verify:
s1a
Change-Id: I5de9ca2479d60ce0c24698abda1b01403be4c283
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
PD#SWPL-137116
Problem:
fmt is null vdin send unstable will black screen
Solution:
if fmt is null send nosig
Verify:
txhd2
Change-Id: I482068d6bbc6aeb867c6c59528d9d8edf3dd79dd
Signed-off-by: qiang.liu <qiang.liu@amlogic.com>
PD#SWPL-152551
Problem:
read chipid fail
Solution:
the chipid can be read by reading registers, but the register address is
set in DTS, which is prone to setting errors. It can be read through a
unified command, so there will be no previous problems.
Verify:
s905x2
Change-Id: I2019a7b8201dedec1f71a1edf09f9b51b730f5c2
Signed-off-by: Wanwei Jiang <wanwei.jiang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-145646
Problem:
Adds debugfs for codec status management.
Solution:
Add codec state module, mainly collect and
manage codec status information, and facilitate
the management of the configuration of each module.
Verify:
ohm
Change-Id: I8f877a954f9873c4aa4d632e007a67c0a41ff2b1
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Pengcheng Chen