PD#SWPL-147355
Problem:
due to lockup when dmc irq ratio is too high
Solution:
use dmc irq thread when irq ratio is too high
Verify:
local
Change-Id: Ie13d584f81563e3c2e111fb5d6033f0e2aa0d337
Signed-off-by: qinglin.li <qinglin.li@amlogic.com>
Signed-off-by: Wanwei Jiang <wanwei.jiang@amlogic.com>
PD#SWPL-157145
Problem:
kernel6.6 need support bak spinlock
Solution:
1.Migrate the driver to ensure normal functions.
2.Add the mbox communication configuration address
Verify:
ba400 and av400
Change-Id: I35f29a83aacb6f8366aa226abd60d4dfea41f8b2
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
PD#SWPL-155817
Problem:
too many module parameters make booting slowly
Solution:
change module parameters to video node
Verify:
a4
Change-Id: Id7f386e8e136a7f8cb34c71fe3ca76c8f869bd97
Signed-off-by: hai.cao <hai.cao@amlogic.com>
PD#SWPL-152551
Problem:
read chipid fail
Solution:
the chipid can be read by reading registers, but the register address is
set in DTS, which is prone to setting errors. It can be read through a
unified command, so there will be no previous problems.
Verify:
s905x2
Change-Id: I69b9e3236a338655e2fbc2293baa917d2c04312c
Signed-off-by: Wanwei Jiang <wanwei.jiang@amlogic.com>
PD#SWPL-151245
Problem:
kernel6.6 will not distinguish different versions of kernel.
so we do not make compatibility code in 6.6.
Solution:
revert compatibility code for kernel 6.6.
Verify:
local
Test:
local
Change-Id: I24b8acac62cec05ffb2f637a86f91789f1d0b905
Signed-off-by: Dezhen Wang <dezhen.wang@amlogic.com>
PD#SWPL-151470
Problem:
many of module parameters are no longer in use, but have not been deleted,
which affects memory and performance. all module parameters are now
disabled and can only be used after the application is approved.
Solution:
disabled all module parameters
Verify:
a4 a5
Test:
none
Change-Id: I27ee98a0437542d7b8a3da437c1525e0afded6b1
Signed-off-by: Wanwei Jiang <wanwei.jiang@amlogic.com>
PD#SWPL-150034
Problem:
enable pagetrace for amlogic-6.6.
Solution:
update the function interface according to 6.6.
Verify:
local.
Change-Id: I48fef620a1da21a40f38da4abe59b44d211ce015
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-150782
Problem:
bring up kernel6.6
Solution:
fix some code problem
Verify:
sc2 c2 a4 a5
Test:
local
Change-Id: I6b9affa83e6d46f6b857f4b542991bc70de4bfb5
Signed-off-by: Dezhen Wang <dezhen.wang@amlogic.com>
PD#SWPL-147883
Problem:
IV slot does not need cleaning.
Solution:
IV slot is not clean.
Verify:
S1A
Change-Id: Id5f9bf3b95573cacb53de2e85796b10ce96ea7be
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-130883
Problem:
need to support inline partition encryption
Solution:
add support inline partition encryption in
spi nand driver
Verify:
s1a
Change-Id: Iadb9b9ae121939ef37a3abbd603a5eec17500739
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
PD#SWPL-125462
Problem:
open the HDMI2.0 ,the color of image is changed
Solution:
add vf info for colorimetry
Verify:
t5m kernel5.15
Change-Id: I126786f130d59fe2977ad8ea46b921aadd302d67
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-142875
Problem:
deadlock will happen in mark bad block process.
Solution:
add rsv-ops interface in rsv-manage to avoid deadlock.
Verify:
c3
Change-Id: I3841a8d3ca8c8f48142828b03ba9aefdf21adc62
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
PD#SWPL-141054
Problem:
hdmi in top1+top2 idk case fail
Solution:
1.add top1 rdmif config for hdmi
2.modify chroma fmt to p444 for hdmi
because vdin dw is 444-10
3.support variable_fps
4.update hist read id only when vf content changed, to match
hist delay with cmodel
Verify:
t3x
Change-Id: Ib5a9bbb266d2105f4729afa12347ee8eb80fae3a
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-138653
Problem:
need modify for aipq of GPU.
Solution:
modify for aipq of GPU.
Verify:
T5M
Change-Id: I2703b3bba282eae827255793e9a94b659b37dc37
Signed-off-by: chen.xu <chen.xu@amlogic.com>
PD#SWPL-144572
Problem:
dewarp/ge2d interrupt resource usage between RTOS and Linux
Solution:
To avoid interfering with RTOS clock/power/interrupt resources,
turn on and keep power/clk first.
Poll the status of rtos,
then turn off power/clk and register interrupt.
Verify:
T7C
Change-Id: Ie2a3ae61df97c594324ffb3dde68d41250c946e3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-145586
Problem:
When the vic of VSDB is stored first, the vic of video data block
is inserted at the end, and an error occurs in 420 capability map
Solution:
add SVD_VIC, used to store SVD in VDB, mapped with 420 CMDB
Verify:
S5/AX201-S928X
Test:
DRM-TX-44
Change-Id: I18b42e9c304b01b6712d9640f4bc08020595f305
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-145646
Problem:
Adds debugfs for codec status management.
Solution:
Add codec state module, mainly collect and
manage codec status information, and facilitate
the management of the configuration of each module.
Verify:
ohm
Change-Id: I8f877a954f9873c4aa4d632e007a67c0a41ff2b1
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-144627
Problem:
when kernel goes to early suspend, need keep the edid data
Solution:
Keep edid data during the suspend state. If there is HPD in
early suspend, there will update the EDID in the bottom of
hpd ISR
Verify:
ohm
Test:
DRM-TX-38
Change-Id: If1975a68da8c7431bb7867359bc5368b37dbc1f3
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-144474
Problem:
For fcc,don't need keep di_multi memory
Solution:
Decoder transfer fcc flag to DI.
Verify:
ohm
Change-Id: I37d1da0dc5c99dd086ee1291d403525a009bc64b
Signed-off-by: lele xiang <lele.xiang@amlogic.com>
PD#SWPL-143936
Problem:
show or hide video does not work
Solution:
add mute plane interface
Verify:
AP222
Test:
DRM-OSD-111
Change-Id: Ib5898c9a0bc3201d397a3a33a9c073f0799c3aee
Signed-off-by: linfang.zhao <linfang.zhao@amlogic.com>
PD#SWPL-143972
Problem:
when clac_tmds_clk > max_tmds_clk, only check whether
the edid support frl, not check the box frl capability
Solution:
add check the box frl capability
Verify:
s905x4
Test:
DRM-TX-42
Change-Id: I502b130c7fc613d020566af35438465c52ee3b60
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#TV-98016
Problem:
5.15 has old driver version.
Solution:
Back port some of the missing change from 5.4 and add CL370123
Verify:
T3X + RDK
Change-Id: I15c7d3bdb1e87aa95aaa4e8238bc4dcd2b5287b6
Signed-off-by: Song Zhao <song.zhao@amlogic.com>
qinglin.li