PD#SWPL-152652
Problem:
dump AVI info invalid
Solution:
update register for AVI info
Verify:
t3x
Change-Id: Ic3874d3cc269043957b0244f9cb476db77c48ced
Signed-off-by: Gaowei Zhao <gaowei.zhao@amlogic.com>
PD#SWPL-151864
Problem:
dv not support different size for two slice
Solution:
vpp config same size for vd1 two slice, it means that
dv input size is same for two slice and overlap is
fixed 96. dv output size maybe different, it depends
on vpp slice[0].hsize and slice[1].hsize
Verify:
t3x
Change-Id: I9986a84968e63939843996ae59d42d82c7707c67
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-151150
Problem:
flickering screen occurs while playing images during rotation.
Solution:
use ge2d on and off mode
to control the ratio between hardware processing and idle states
Verify:
t5
Change-Id: I4b45e5d9636310630092f09ddc5946a298277e1d
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-151748
Problem:
update hdmitx version for release.
sabrina u / kernel 5.15: hdmitx driver refactoring
sabrina release base from trunk11.20
audio mat question modified by cl:380286
Solution:
update hdmitx version
Verify:
verify on ohm
Test:
DRM-TX-40
Change-Id: Ie5ccf28423bbcecfdaddaf97a64fbfd692c3bf23
Signed-off-by: yahui.liu <yahui.liu@amlogic.com>
PD#SWPL-150936
Problem:
add mvrd to solve splash screen problem
Solution:
add mvrd to solve splash screen problem
Verify:
T5M
Change-Id: I44a4ee7bd6218cc86f943ed65a6e7336a0ec3a5b
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
PD#SWPL-150752
Problem:
repeat frame cause scene change early.
Solution:
modify new frame do scene change detection.
Verify:
t5m
Change-Id: I1c798fb8da3308c1778184ce751263062bdea81f
Signed-off-by: Huijuan Xiao <huijuan.xiao@amlogic.com>
PD#SWPL-144353
Problem:
During the mode switching process, when systemctrl writes the
node to close phy, the phy action is to close it immediately.
At this time, part of the video data may have been transmitted,
but the data is incomplete. At this time, rx got part of the image.
Some TVs did not perform frame dropping processing after getting part
of the data and parsed it, but the solution was wrong, which may
cause some display abnormalities.
Solution:
Referring to the processing method of the Apple box,
during the mode switching process, when systemctrl issues
a shutdown phy command, we will wait until vsync is
interrupted before shutting down the phy. At this time,
there is no video data transmission, which is relatively safe.
Verify:
ohm/T7
Test:
DRM-TX-67, DRM-TX-78, DRM-TX-79, DRM-TX-80, DRM-TX-81
Change-Id: I25162448f6d8f432bc48e0e038bac9a108bf8151
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#SWPL-143601
Problem:
Need to bringup to console
Solution:
bringup to console for ab301
Verify:
tm2_ab301
Change-Id: I8f78a322da984eafa71ee21bee330eeccc224058
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-149012
Problem:
KL driver should be able to check
if KL's fuse is okay without M2M or descrambler in REE.
Solution:
add etsi challenge-response function
Verify:
T5D
Change-Id: I8492896086ba3e6e4701ee4511794e803ed6d900
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-145570
Problem:
code refactoring to determine allocating
buffer's size between Gralloc and Codec2
Solution:
set parameters to node for gralloc
Verify:
txhd2
Change-Id: I5812b4bf23b2697ebaf33674b7cb2dcc88025eba
Signed-off-by: xinli.gao <xinli.gao@amlogic.com>
PD#SWPL-147629
Problem:
no ioctl to get vrr range
Solution:
add ioctl to get vrr range
Verify:
t7c
Test:
DRM-TX-75
Change-Id: If6dab5d69b90ff63acf9617c61a452a6f25bd5d9
Signed-off-by: congyang.huang <congyang.huang@amlogic.com>
PD#SWPL-147512
Problem:
LDIM requires a strict timing sequence to match with the vsync signal
Solution:
SPICC supports vsync/line-n triggering control, Add a interface to
start/stop the vsync triggering transfer for LDIM
Porting from 5.4 1f62b7d1
Verify:
t3 t982
Change-Id: Ida2f63cbe318dceebbe97514e41a588e4ea143d4
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-147830
Problem:
sometime there are invalid config cause panel display abnormal
Solution:
add lcd config check function
1.lcd timing & tcon setting valid condition is decided by driver itself
2.display path timing_req_min is configured in dts, with alert_level
3.auto check after load lcd config, driver will be blocked by fatal err
4.manual cmd: echo check >/sys/class/lcd/debug
Verify:
am301
Change-Id: Iddd21f31f654ef99ae51465788c11a8d4a4e7446
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-147883
Problem:
IV slot does not need cleaning.
Solution:
IV slot is not clean.
Verify:
S1A
Change-Id: Id5f9bf3b95573cacb53de2e85796b10ce96ea7be
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-130883
Problem:
need to support inline partition encryption
Solution:
add support inline partition encryption in
spi nand driver
Verify:
s1a
Change-Id: Iadb9b9ae121939ef37a3abbd603a5eec17500739
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
PD#SWPL-125462
Problem:
open the HDMI2.0 ,the color of image is changed
Solution:
add vf info for colorimetry
Verify:
t5m kernel5.15
Change-Id: I126786f130d59fe2977ad8ea46b921aadd302d67
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-142875
Problem:
deadlock will happen in mark bad block process.
Solution:
add rsv-ops interface in rsv-manage to avoid deadlock.
Verify:
c3
Change-Id: I3841a8d3ca8c8f48142828b03ba9aefdf21adc62
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
PD#SWPL-141054
Problem:
hdmi in top1+top2 idk case fail
Solution:
1.add top1 rdmif config for hdmi
2.modify chroma fmt to p444 for hdmi
because vdin dw is 444-10
3.support variable_fps
4.update hist read id only when vf content changed, to match
hist delay with cmodel
Verify:
t3x
Change-Id: Ib5a9bbb266d2105f4729afa12347ee8eb80fae3a
Signed-off-by: yao liu <yao.liu@amlogic.com>
Xiangyu Cai