diff --git a/config/example-odroidc5.cfg b/config/example-odroidc5.cfg
new file mode 100644
index 00000000..52d6e882
--- /dev/null
+++ b/config/example-odroidc5.cfg
@@ -0,0 +1,243 @@
+# Copyright (C) 2025 Hardkernel Co., Ltd
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>
+
+# This file contains common pin mappings for the m1s with board_stepper
+# To use this config, the firmware should be compiled for the
+# Linux process.
+
+[mcu]
+serial: /tmp/klipper_host_mcu
+
+[mcu EBBCan] # based on EBB36 CAN V1.1
+canbus_uuid: e8a11afa199b
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 5000
+#max_accel: 7000
+#max_accel_to_decel: 3500
+max_z_velocity: 25
+max_z_accel: 100
+
+[stepper_x]
+step_pin: gpiochip0/gpio31
+dir_pin: gpiochip0/gpio30
+enable_pin: !gpiochip0/gpio50
+endstop_pin: gpiochip0/gpio51
+homing_retract_dist: 2
+microsteps: 16
+rotation_distance: 40
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: gpiochip0/gpio28
+dir_pin: gpiochip0/gpio41
+enable_pin: !gpiochip0/gpio66
+endstop_pin: gpiochip0/gpio49
+homing_retract_dist: 2
+microsteps: 16
+rotation_distance: 40
+position_endstop: 0
+position_max: 230
+homing_speed: 50
+
+[stepper_z]
+step_pin: gpiochip0/gpio55
+dir_pin: !gpiochip0/gpio62
+enable_pin: !gpiochip0/gpio26
+microsteps: 16
+rotation_distance: 8
+endstop_pin: probe: z_virtual_endstop
+position_min: -4.0
+position_max: 300
+
+[stepper_z1]
+step_pin: gpiochip0/gpio54
+dir_pin: !gpiochip0/gpio40
+enable_pin: !gpiochip0/gpio27
+microsteps: 16
+rotation_distance: 8
+
+[extruder]
+step_pin: EBBCan: PD0
+dir_pin: EBBCan: PD1
+enable_pin: !EBBCan: PD2
+microsteps: 16
+rotation_distance: 7.703694208
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: EBBCan:PB13
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: EBBCan:PA3
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 240
+min_extrude_temp: 0
+
+[heater_fan nozzle_fan]
+pin: EBBCan:PA2
+heater: extruder
+heater_temp: 50.0
+
+[heater_bed]
+heater_pin: gpiochip0/gpio65
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: analog0
+control = pid
+pid_kp = 76.549
+pid_ki = 0.974
+pid_kd = 1504.195
+min_temp: 0
+max_temp: 85
+
+[z_tilt]
+z_positions:
+    260, 130#    -55,-7
+    -30, 130#    -55,320
+points:
+    20,130
+    180,130
+retries: 5
+retry_tolerance: 0.002
+
+[fan]
+pin: EBBCan:PA1
+
+[verify_heater extruder]
+max_error: 200
+check_gain_time: 60
+heating_gain: 1
+
+[tmc2209 stepper_x]
+uart_pin: gpiochip0/gpio61
+tx_pin: gpiochip0/gpio60
+uart_address: 1
+run_current: 0.800
+hold_current: 0.500
+stealthchop_threshold: 250
+
+[tmc2209 stepper_y]
+uart_pin: gpiochip0/gpio61
+tx_pin: gpiochip0/gpio60
+uart_address: 2
+run_current: 0.800
+hold_current: 0.500
+stealthchop_threshold: 250
+
+[tmc2209 stepper_z]
+uart_pin: gpiochip0/gpio61
+tx_pin: gpiochip0/gpio60
+uart_address: 3
+run_current: 1.000
+hold_current: 0.500
+stealthchop_threshold: 30
+
+[tmc2209 stepper_z1]
+uart_pin: gpiochip0/gpio61
+tx_pin: gpiochip0/gpio60
+uart_address: 0
+run_current: 1.000
+hold_current: 0.500
+stealthchop_threshold: 30
+
+[tmc2209 extruder]
+uart_pin: EBBCan:PA15
+run_current: 0.800
+hold_current: 0.500
+stealthchop_threshold: 250
+
+[probe]
+pin: !EBBCan:PB8
+x_offset: -42.0
+y_offset: -4.0
+speed: 5.0
+
+[bed_mesh]
+speed: 80
+mesh_min: 0,0
+mesh_max: 180,270
+probe_count: 3,3
+
+[bed_screws]
+screw1: 30,25
+screw2: 270,25
+screw3: 270,265
+screw4: 30, 265
+
+[input_shaper]
+shaper_freq_x: 39.4
+shaper_type_x: mzv
+shaper_freq_y: 25.0
+shaper_type_y: mzv
+
+[virtual_sdcard]
+path: /var/printer_data/gcodes
+
+[pause_resume]
+
+[display_status]
+
+[homing_override]
+set_position_z: 0
+axes: z
+gcode:
+    G1 Z10 F600
+    G28 X Y
+    G1 X142 Y150 F3000	# (100 + 42, 150 + 4)
+    G28 Z
+
+[gcode_macro START_PRINT]
+gcode:
+    G28
+
+[gcode_macro PAUSE]
+rename_existing: BASE_PAUSE
+gcode:
+    SAVE_GCODE_STATE NAME=PAUSE_state
+    BASE_PAUSE
+    G91
+    G1 E-{E} F2100
+    G1 Z{Z}
+    G90
+    G1 X{X} Y{Y} F6000
+
+[gcode_macro RESUME]
+rename_existing: BASE_RESUME
+gcode:
+    G91
+    G1 E{E} F2100
+    G90
+    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
+    BASE_RESUME
+
+[gcode_macro CANCEL_PRINT]
+rename_existing: BASE_CANCEL_PRINT
+gcode:
+    TURN_OFF_HEATERS
+    CLEAR_PAUSE
+    SDCARD_RESET_FILE
+    BASE_CANCEL_PRINT
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [probe]
+#*# z_offset = 0.34
\ No newline at end of file
diff --git a/config/example-odroidm1s.cfg b/config/example-odroidm1s.cfg
new file mode 100644
index 00000000..bdae94e1
--- /dev/null
+++ b/config/example-odroidm1s.cfg
@@ -0,0 +1,296 @@
+# Copyright (C) 2023 Hardkernel Co., Ltd
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>
+
+# This file contains common pin mappings for the m1s with board_stepper
+# To use this config, the firmware should be compiled for the
+# Linux process.
+
+[mcu]
+serial: /tmp/klipper_host_mcu
+
+[mcu EBBCan] # based on EBB42 CAN V1.0
+# python3 ~/klipper/lib/canboot/flash_can.py -i can0 -q
+canbus_uuid: 1e8ea3b32c8a
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 5000
+#max_accel: 7000
+#max_accel_to_decel: 3500
+max_z_velocity: 25
+max_z_accel: 100
+
+[stepper_x]
+step_pin: gpiochip2/gpio15
+dir_pin: gpiochip2/gpio16
+enable_pin: !gpiochip0/gpio12
+endstop_pin: gpiochip2/gpio6
+homing_retract_dist: 2
+microsteps: 16
+rotation_distance: 40
+position_endstop: 0
+position_max: 240
+homing_speed: 50
+
+[stepper_y]
+step_pin: gpiochip0/gpio13
+dir_pin: gpiochip0/gpio14
+enable_pin: !gpiochip3/gpio13
+endstop_pin: gpiochip3/gpio14
+homing_retract_dist: 2
+microsteps: 16
+rotation_distance: 40
+position_endstop: 0
+position_max: 290
+homing_speed: 50
+
+[stepper_z]
+step_pin: gpiochip2/gpio7
+dir_pin: !gpiochip2/gpio13
+enable_pin: !gpiochip2/gpio14
+microsteps: 16
+rotation_distance: 8
+endstop_pin: probe: z_virtual_endstop
+#position_endstop: 0.0
+position_min: -4.0
+position_max: 330
+
+[stepper_z1]
+step_pin: gpiochip2/gpio9
+dir_pin: !gpiochip0/gpio18
+enable_pin: !gpiochip3/gpio11
+microsteps: 16
+rotation_distance: 8
+# #endstop_pin: probe: z_virtual_endstop
+# position_endstop: 0.0
+#
+# [stepper_z2]
+# step_pin: gpiochip0/gpio11
+# dir_pin: !gpiochip2/gpio5
+# enable_pin: !gpiochip3/gpio20
+# microsteps: 16
+# rotation_distance: 8
+# endstop_pin: probe: z_virtual_endstop
+#position_endstop: 0.0
+# position_min: -4.0
+# position_max: 330
+#
+# [stepper_z3]
+# step_pin: gpiochip3/gpio21
+# dir_pin: !gpiochip3/gpio12
+# enable_pin: !gpiochip3/gpio20
+# microsteps: 16
+# rotation_distance: 8
+# endstop_pin: probe: z_virtual_endstop
+# #position_endstop: 0.0
+# position_min: -4.0
+# position_max: 330
+
+[extruder]
+step_pin: EBBCan: PA9
+dir_pin: EBBCan: PA8
+enable_pin: !EBBCan: PA10
+microsteps: 16
+rotation_distance: 7.703694208
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: EBBCan:PB1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: EBBCan:PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 240
+min_extrude_temp: 100
+
+[heater_fan nozzle_fan]
+pin: EBBCan:PA2
+heater: extruder
+heater_temp: 50.0
+
+[heater_bed]
+heater_pin: gpiochip2/gpio10
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: analog3
+control = pid
+pid_kp = 76.549
+pid_ki = 0.974
+pid_kd = 1504.195
+min_temp: 0
+max_temp: 85
+
+[z_tilt]
+z_positions:
+    260, 130#    -55,-7
+    -30, 130#    -55,320
+points:
+    20,130
+    210,130
+retries: 5
+retry_tolerance: 0.002
+
+[fan]
+pin: EBBCan:PA1
+
+[verify_heater extruder]
+max_error: 200
+check_gain_time: 60
+heating_gain: 1
+
+[tmc2209 stepper_x]
+uart_pin: gpiochip0/gpio16
+tx_pin: gpiochip0/gpio17
+uart_address: 0
+run_current: 0.800
+hold_current: 0.500
+stealthchop_threshold: 250
+
+[tmc2209 stepper_y]
+uart_pin: gpiochip0/gpio16
+tx_pin: gpiochip0/gpio17
+uart_address: 2
+run_current: 0.800
+hold_current: 0.500
+stealthchop_threshold: 250
+
+[tmc2209 stepper_z]
+uart_pin: gpiochip0/gpio16
+tx_pin: gpiochip0/gpio17
+uart_address: 1
+run_current: 1.000
+hold_current: 0.500
+stealthchop_threshold: 30
+
+[tmc2209 stepper_z1]
+uart_pin: gpiochip0/gpio16
+tx_pin: gpiochip0/gpio17
+uart_address: 3
+run_current: 1.000
+hold_current: 0.500
+stealthchop_threshold: 30
+#
+# [tmc2209 stepper_z2]
+# uart_pin: gpiochip2/gpio3
+# tx_pin: gpiochip2/gpio4
+# uart_address: 0
+# run_current: 1.000
+# hold_current: 0.500
+# stealthchop_threshold: 30
+#
+# [tmc2209 stepper_z3]
+# uart_pin: gpiochip2/gpio3
+# tx_pin: gpiochip2/gpio4
+# uart_address: 2
+# run_current: 1.000
+# hold_current: 0.500
+# stealthchop_threshold: 30
+
+[tmc2209 extruder]
+uart_pin: EBBCan:PA13
+run_current: 0.800
+hold_current: 0.500
+stealthchop_threshold: 250
+
+[probe]
+pin: !EBBCan:PA5
+x_offset: -42.0
+y_offset: -4.0
+speed: 5.0
+#samples: 3
+#sample_retract_dist: 1.0
+
+[bed_mesh]
+speed: 80
+#horizontal_move_z: 3
+mesh_min: 0,0
+mesh_max: 180,270
+probe_count: 3,3
+#probe_count: 10,10
+#fade_start: 1.0
+#fade_end: 10.0
+
+[bed_screws]
+screw1: 30,25
+screw2: 270,25
+screw3: 270,265
+screw4: 30, 265
+
+[input_shaper]
+shaper_freq_x: 39.4
+shaper_type_x: mzv
+shaper_freq_y: 25.0
+shaper_type_y: mzv
+
+[virtual_sdcard]
+path: ~/printer_data/gcodes
+
+[pause_resume]
+
+[display_status]
+
+[homing_override]
+set_position_z: 0
+axes: z
+gcode:
+    G1 Z10 F600
+    G28 X Y
+    G1 X142 Y150 F3000	# (100 + 42, 150 + 4)
+    G28 Z
+
+[gcode_macro START_PRINT]
+gcode:
+    G28
+
+[gcode_macro PAUSE]
+rename_existing: BASE_PAUSE
+#default_parameter_X: 230    #edit to your park position
+#default_parameter_Y: 230    #edit to your park position
+#default_parameter_Z: 10     #edit to your park position
+#default_parameter_E: 1      #edit to your retract length
+gcode:
+    SAVE_GCODE_STATE NAME=PAUSE_state
+    BASE_PAUSE
+    G91
+    G1 E-{E} F2100
+    G1 Z{Z}
+    G90
+    G1 X{X} Y{Y} F6000
+
+[gcode_macro RESUME]
+rename_existing: BASE_RESUME
+#default_parameter_E: 1      #edit to your retract length
+gcode:
+    G91
+    G1 E{E} F2100
+    G90
+    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
+    BASE_RESUME
+
+[gcode_macro CANCEL_PRINT]
+rename_existing: BASE_CANCEL_PRINT
+gcode:
+    TURN_OFF_HEATERS
+    CLEAR_PAUSE
+    SDCARD_RESET_FILE
+    BASE_CANCEL_PRINT
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [probe]
+#*# z_offset = 0.34
\ No newline at end of file