shinys000114/klipper
1
0
Fork 0
mirror of git://soft.sys114.com/klipper synced 2026-02-12 05:10:25 +09:00
Code Issues Packages Projects Releases Wiki Activity

stm32: Simplify USB/Serial/CANbus Kconfig selection

Browse Source 
Combine the various communication options into a single "make
menuconfig" menu item.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2021-03-18 13:20:54 -04:00
parent c8dc3afc23
commit 1eddc0fd90
29 changed files with 186 additions and 172 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
config/printer-creality-ender6-2020.cfg
View File

@@ -1,7 +1,7 @@
# This file contains pin mappings for the stock 2020 Creality Ender 6.
# To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and with "Use USB for
# communication" disabled.
# To use this config, during "make menuconfig" select the STM32F103
# with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# Because this printer has factory wiring, mounts, and firmware for
# a BLTouch, but does not ship with one at this time, default values
@@ -10,9 +10,9 @@
# customize the offsets, particularly z-offset, for their specific unit.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and