config: Update example configs to use rotation_distance

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

config/kit-voron2-250mm.cfg

@@ -53,7 +53,8 @@ step_pin: ar54
 dir_pin: !ar55
 enable_pin: !ar38
 #   X on mcu_xye
-step_distance: 0.0125
+microsteps: 16
+rotation_distance: 40
 #   80 steps per mm - 1.8 deg - 1/16 microstepping
 endstop_pin: ^ar2
 #   X_MAX on mcu_xye
@@ -69,7 +70,8 @@ step_pin: ar60
 dir_pin: !ar61
 enable_pin: !ar56
 #   Y on mcu_xye
-step_distance: 0.0125
+microsteps: 16
+rotation_distance: 40
 #   80 steps per mm - 1.8 deg - 1/16 microstepping
 endstop_pin: ^ar15
 #   Y_MAX on mcu_xye
@@ -85,7 +87,8 @@ step_pin: z:ar54
 dir_pin: !z:ar55
 enable_pin: !z:ar38
 #   X on mcu_z
-step_distance: 0.00250
+microsteps: 16
+rotation_distance: 8
 #   400 steps per mm - 1.8 deg - 1/16 microstepping
 endstop_pin: ^!z:ar18
 #   Z_MIN on mcu_z
@@ -104,7 +107,8 @@ step_pin: z:ar60
 dir_pin: z:ar61
 enable_pin: !z:ar56
 #   Y on mcu_z
-step_distance: 0.00250
+microsteps: 16
+rotation_distance: 8
 #   400 steps per mm - 1.8 deg - 1/16 microstepping
 
 [stepper_z2]
@@ -113,7 +117,8 @@ step_pin: z:ar46
 dir_pin: !z:ar48
 enable_pin: !z:ar62
 #   Z on mcu_z
-step_distance: 0.00250
+microsteps: 16
+rotation_distance: 8
 #   400 steps per mm - 1.8 deg - 1/16 microstepping
 
 [stepper_z3]
@@ -122,7 +127,8 @@ step_pin: z:ar26
 dir_pin: z:ar28
 enable_pin: !z:ar24
 #   E0 on mcu_z
-step_distance: 0.00250
+microsteps: 16
+rotation_distance: 8
 #   400 steps per mm - 1.8 deg - 1/16 microstepping
 
 [extruder]
@@ -130,7 +136,8 @@ step_pin: ar26
 dir_pin: ar28
 enable_pin: !ar24
 #   E0 on mcu_xye
-step_distance: 0.00180180
+microsteps: 16
+rotation_distance: 5.76576
 #   555 steps per mm - 1.8 deg - 1/16 microstepping (Mobius2)
 nozzle_diameter: 0.400
 filament_diameter: 1.750