config: Don't use arduino mega aliases in example config files

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

config/printer-anycubic-kossel-2016.cfg

@@ -8,12 +8,12 @@
 # See docs/Config_Reference.md for a description of parameters.
 
 [stepper_a]
-step_pin: ar54
-dir_pin: !ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: !PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar2
+endstop_pin: ^PE4
 homing_speed: 60
 # The next parameter needs to be adjusted for
 # your printer. You may want to start with 280
@@ -23,32 +23,32 @@ position_endstop: 273.0
 arm_length: 229.4
 
 [stepper_b]
-step_pin: ar60
-dir_pin: !ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar15
+endstop_pin: ^PJ0
 
 [stepper_c]
-step_pin: ar46
-dir_pin: !ar48
-enable_pin: !ar62
+step_pin: PL3
+dir_pin: !PL1
+enable_pin: !PK0
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar19
+endstop_pin: ^PD2
 
 [extruder]
-step_pin: ar26
-dir_pin: !ar28
-enable_pin: !ar24
+step_pin: PA4
+dir_pin: !PA6
+enable_pin: !PA2
 microsteps: 16
 rotation_distance: 35.165
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog13
+sensor_pin: PK5
 control: pid
 pid_Kp: 25.349
 pid_Ki: 1.216
@@ -58,23 +58,22 @@ min_temp: 0
 max_temp: 275
 
 #[heater_bed]
-#heater_pin: ar8
+#heater_pin: PH5
 #sensor_type: EPCOS 100K B57560G104F
-#sensor_pin: analog14
+#sensor_pin: PK6
 #control: watermark
 #min_temp: 0
 #max_temp: 130
 
 [fan]
-pin: ar9
+pin: PH6
 kick_start_time: 0.200
 
 [heater_fan extruder_cooler_fan]
-pin: ar44
+pin: PL5
 
 [mcu]
 serial: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
-pin_map: arduino
 
 [printer]
 kinematics: delta
@@ -102,12 +101,12 @@ timeout: 360
 # "RepRapDiscount 2004 Smart Controller" type displays
 [display]
 lcd_type: hd44780
-rs_pin: ar16
-e_pin: ar17
-d4_pin: ar23
-d5_pin: ar25
-d6_pin: ar27
-d7_pin: ar29
-encoder_pins: ^ar31, ^ar33
-click_pin: ^!ar35
-kill_pin: ^!ar41
+rs_pin: PH1
+e_pin: PH0
+d4_pin: PA1
+d5_pin: PA3
+d6_pin: PA5
+d7_pin: PA7
+encoder_pins: ^PC6, ^PC4
+click_pin: ^!PC2
+kill_pin: ^!PG0