config: Don't use arduino mega aliases in example config files

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

config/printer-velleman-k8200-2013.cfg

@@ -7,52 +7,52 @@
 # See docs/Config_Reference.md for a description of parameters.
 
 [stepper_x]
-step_pin: ar54
-dir_pin: !ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: !PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar3
+endstop_pin: ^PE5
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_y]
-step_pin: ar60
-dir_pin: !ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar14
+endstop_pin: ^PJ1
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_z]
-step_pin: ar46
-dir_pin: !ar48
-enable_pin: !ar63
+step_pin: PL3
+dir_pin: !PL1
+enable_pin: !PK1
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^ar18
+endstop_pin: ^PD3
 position_endstop: 0.5
 # Set position_max to 200 if you have the original Z-axis setup.
 position_max: 250
 
 [extruder]
-step_pin: ar26
+step_pin: PA4
 # Remove the "!" from dir_pin if you have an original extruder
-dir_pin: !ar28
-enable_pin: !ar24
+dir_pin: !PA6
+enable_pin: !PA2
 # You will have to calculate your own rotation_distance.
 # This is for the belted extruder https://www.thingiverse.com/thing:339928
 microsteps: 16
 rotation_distance: 4.266
 nozzle_diameter: 0.400
 filament_diameter: 2.85
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: ATC Semitec 104GT-2
-sensor_pin: analog13
+sensor_pin: PK5
 control: pid
 pid_Kp: 21.503
 pid_Ki: 1.103
@@ -61,9 +61,9 @@ min_temp: 0
 max_temp: 250
 
 [heater_bed]
-heater_pin: ar9
+heater_pin: PH6
 sensor_type: ATC Semitec 104GT-2
-sensor_pin: analog14
+sensor_pin: PK6
 control: pid
 pid_Kp: 75.283
 pid_Ki: 0.588
@@ -72,12 +72,11 @@ min_temp: 0
 max_temp: 130
 
 [fan]
-pin: ar8
+pin: PH5
 kick_start_time: 0.500
 
 [mcu]
 serial: /dev/ttyUSB0
-pin_map: arduino
 
 [printer]
 kinematics: cartesian
@@ -89,11 +88,11 @@ max_z_accel: 100
 # The LCD is untested - "RepRapDiscount 2004 Smart Controller" displays
 #[display]
 #lcd_type: hd44780
-#rs_pin: ar27
-#e_pin: ar29
-#d4_pin: ar37
-#d5_pin: ar35
-#d6_pin: ar33
-#d7_pin: ar31
-#encoder_pins: ^ar16, ^ar17
-#click_pin: ^!ar23
+#rs_pin: PA5
+#e_pin: PA7
+#d4_pin: PC0
+#d5_pin: PC2
+#d6_pin: PC4
+#d7_pin: PC6
+#encoder_pins: ^PH1, ^PH0
+#click_pin: ^!PA1