test: Update test case to not use pin_map

Remove all users of the pin_map setting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

test/klippy/dual_carriage.cfg

@@ -1,59 +1,59 @@
 # Test config with dual carriage and multiple extruders
 [stepper_x]
-step_pin: ar54
-dir_pin: ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar3
+endstop_pin: ^PE5
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [dual_carriage]
 axis: x
-step_pin: ar16
-dir_pin: ar17
-enable_pin: !ar23
+step_pin: PH1
+dir_pin: PH0
+enable_pin: !PA1
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar2
+endstop_pin: ^PE4
 position_endstop: 200
 position_max: 200
 homing_speed: 50
 
 [stepper_y]
-step_pin: ar60
-dir_pin: !ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar14
+endstop_pin: ^PJ1
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_z]
-step_pin: ar46
-dir_pin: ar48
-enable_pin: !ar62
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^ar18
+endstop_pin: ^PD3
 position_endstop: 0.5
 position_max: 200
 
 [extruder]
-step_pin: ar26
-dir_pin: ar28
-enable_pin: !ar24
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
 microsteps: 16
 rotation_distance: 33.5
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog13
+sensor_pin: PK5
 control: pid
 pid_Kp: 22.2
 pid_Ki: 1.08
@@ -73,16 +73,16 @@ gcode:
     SET_DUAL_CARRIAGE CARRIAGE=0
 
 [extruder1]
-step_pin: ar36
-dir_pin: ar34
-enable_pin: !ar30
+step_pin: PC1
+dir_pin: PC3
+enable_pin: !PC7
 microsteps: 16
 rotation_distance: 33.5
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar11
+heater_pin: PB5
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog15
+sensor_pin: PK7
 control: pid
 pid_Kp: 22.2
 pid_Ki: 1.08
@@ -104,19 +104,18 @@ gcode:
     SET_DUAL_CARRIAGE CARRIAGE=1
 
 [servo my_servo]
-pin: ar7
+pin: PH4
 
 [heater_bed]
-heater_pin: ar8
+heater_pin: PH5
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog14
+sensor_pin: PK6
 control: watermark
 min_temp: 0
 max_temp: 130
 
 [mcu]
 serial: /dev/ttyACM0
-pin_map: arduino
 
 [printer]
 kinematics: cartesian