test: Update test case to not use pin_map

Remove all users of the pin_map setting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

test/klippy/temperature.cfg

@@ -1,47 +1,47 @@
 # Test config with many different types of temperature sensors
 [stepper_x]
-step_pin: ar54
-dir_pin: ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar3
+endstop_pin: ^PE5
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_y]
-step_pin: ar60
-dir_pin: !ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^ar14
+endstop_pin: ^PJ1
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 [stepper_z]
-step_pin: ar46
-dir_pin: ar48
-enable_pin: !ar62
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^ar18
+endstop_pin: ^PD3
 position_endstop: 0.5
 position_max: 200
 
 [extruder]
-step_pin: ar26
-dir_pin: ar28
-enable_pin: !ar24
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
 microsteps: 16
 rotation_distance: 33.5
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: AD595
-sensor_pin: analog13
+sensor_pin: PK5
 control: pid
 pid_Kp: 22.2
 pid_Ki: 1.08
@@ -50,44 +50,44 @@ min_temp: 0
 max_temp: 250
 
 [heater_bed]
-heater_pin: ar8
+heater_pin: PH5
 sensor_type: PT100 INA826
-sensor_pin: analog14
+sensor_pin: PK6
 control: watermark
 min_temp: 0
 max_temp: 130
 
 [temperature_fan test_max6675]
-pin: ar9
+pin: PH6
 min_temp: 0
 max_temp: 100
 control: watermark
 sensor_type: MAX6675
-sensor_pin: ar2
+sensor_pin: PE4
 
 [temperature_fan test_max31855]
-pin: ar4
+pin: PG5
 min_temp: 0
 max_temp: 100
 control: watermark
 sensor_type: MAX31855
-sensor_pin: ar5
+sensor_pin: PE3
 
 [temperature_fan test_max31856]
-pin: ar6
+pin: PH3
 min_temp: 0
 max_temp: 100
 control: watermark
 sensor_type: MAX31856
-sensor_pin: ar7
+sensor_pin: PH4
 
 [temperature_fan test_max31865]
-pin: ar12
+pin: PB6
 min_temp: 0
 max_temp: 100
 control: watermark
 sensor_type: MAX31865
-sensor_pin: ar13
+sensor_pin: PB7
 
 [thermistor my_custom_thermistor]
 temperature1: 25
@@ -98,12 +98,12 @@ temperature3: 250
 resistance3: 100
 
 [temperature_fan test_custom_thermistor]
-pin: ar15
+pin: PJ0
 min_temp: 0
 max_temp: 100
 control: watermark
 sensor_type: my_custom_thermistor
-sensor_pin: analog3
+sensor_pin: PF3
 
 [adc_temperature my_custom_adc]
 temperature1: 25
@@ -114,12 +114,12 @@ temperature3: 250
 voltage3: 3
 
 [temperature_fan test_custom_adc]
-pin: ar16
+pin: PH1
 min_temp: 0
 max_temp: 100
 control: watermark
 sensor_type: my_custom_adc
-sensor_pin: analog4
+sensor_pin: PF4
 
 [adc_temperature my_custom_resistance_adc]
 temperature1: 25
@@ -131,18 +131,17 @@ resistance3: 3000
 
 [temperature_sensor test_custom_resistance_adc]
 sensor_type: my_custom_resistance_adc
-sensor_pin: analog5
+sensor_pin: PF5
 
 [temperature_sensor test_PT1000]
 sensor_type: PT1000
-sensor_pin: analog9
+sensor_pin: PK1
 
 [controller_fan test_controller_fan]
-pin: ar17
+pin: PH0
 
 [mcu]
 serial: /dev/ttyACM0
-pin_map: arduino
 
 [printer]
 kinematics: cartesian