shinys000114/klipper
1
0
Fork 0
mirror of git://soft.sys114.com/klipper synced 2026-02-07 07:00:26 +09:00
Code Issues Packages Projects Releases Wiki Activity

Commit Graph

  • 832c0bc017 docs: Add more hints to use /dev/by-id/ for the serial device Kevin O'Connor 2018-04-20 11:43:21 -04:00
  • 6793970198 serial_irq: Add new generic/serial_irq.c code Kevin O'Connor 2018-04-12 18:04:00 -04:00
  • 606222da5b docs: Add STM32F103 benchmarks to the Features document Kevin O'Connor 2018-04-12 14:48:38 -04:00
  • add370230f stm32f1: Use generic timer_irq.c dispatch code Kevin O'Connor 2018-04-12 14:25:25 -04:00
  • 2bf9e27b9e stm32f1: Use different method for handling 16bit -> 32bit timer conversion Kevin O'Connor 2018-04-12 14:11:25 -04:00
  • 06a4753f73 stm32f1: Prefer uint32_t over uint16_t in timer.c Kevin O'Connor 2018-04-12 14:01:47 -04:00
  • bf4e851e21 config: Update sample-bltouch.cfg with recent probe changes Kevin O'Connor 2018-04-18 18:04:21 -04:00
  • 35f3f6506b scripts: Add stm32flash to octopi-install.sh package list Kevin O'Connor 2018-04-12 13:58:30 -04:00
  • c539fed8bb docs: Add additional information to FAQ on heater checks Kevin O'Connor 2018-04-09 22:00:26 -04:00
  • b5b365289c test: Add STM32F1 compile test case Kevin O'Connor 2018-04-09 19:19:51 -04:00
  • 75d5737211 Add STM32F103 port Grigori Goronzy 2018-03-31 15:34:59 +02:00
  • e097b08520 config: add display support for Anet A8 Grigori Goronzy 2018-04-09 20:49:43 +02:00
  • 6466af6313 adc_temperature: Support defining custom sensors in the config file Kevin O'Connor 2018-04-09 15:44:34 -04:00
  • c463893a5e adc_temperatures: Add "PT100 INA826" sensor type Kevin O'Connor 2018-04-09 15:11:12 -04:00
  • b2caa486c5 adc_temperature: Support multiple ranges for ADC lookup Kevin O'Connor 2018-04-09 14:02:59 -04:00
  • 75b89f5261 thermistor: Fallback to using beta if Steinhart-Hart c3 is negative Kevin O'Connor 2018-04-09 12:35:18 -04:00
  • 8c8261ba80 thermistor: Add support for defining custom thermistors Kevin O'Connor 2018-04-09 12:14:20 -04:00
  • f8a28401c0 config: Update indentation of display section in example-extras.cfg Kevin O'Connor 2018-04-09 12:02:23 -04:00
  • 97f30765a1 docs: Update installation document for OctoPrint 1.3.7 Kevin O'Connor 2018-04-09 11:39:36 -04:00
  • f616a88b15 Adjusted Tronxy X5s settings Arkadiusz Gluszyk 2018-03-24 14:32:37 +01:00
  • 7c5f9ee458 config: Add display section to default Creality CR10s config Kevin O'Connor 2018-04-08 11:14:48 -04:00
  • 460cc88f3d pid_calibrate: Make sure to unregister new control class on error Kevin O'Connor 2018-04-06 10:56:34 -04:00
  • 06d73207e7 heater: Move Thermistor and Linear to their own files in extras/ Kevin O'Connor 2018-04-04 14:53:47 -04:00
  • 0fc4f0946e heater: Move adc logic into Thermistor class Kevin O'Connor 2018-04-04 14:13:59 -04:00
  • 7e78b2665e heater: Merge ThermistorBeta class into Thermistor class Kevin O'Connor 2018-04-04 13:38:28 -04:00
  • aed958eb5c heater: Add PrinterHeaters class that stores all sensors and heaters Kevin O'Connor 2018-04-03 17:01:10 -04:00
  • 4eeb43b191 pins: Remove module level get_printer_pins() and setup_pin() functions Kevin O'Connor 2018-04-04 12:07:41 -04:00
  • a4439b93b7 toolhead: Limit junction speed of short moves Kevin O'Connor 2018-03-25 18:41:15 -04:00
  • 5e060c3c65 bed_tilt: Apply bed_tilt_calibrate settings to current session Kevin O'Connor 2018-04-03 12:02:17 -04:00
  • 0f1a142779 extruder: Log SET_PRESSURE_ADVANCE changes Kevin O'Connor 2018-04-03 11:42:43 -04:00
  • bb8926d67a klippy: Automatically clear rollover_info on each restart Kevin O'Connor 2018-04-03 12:13:06 -04:00
  • a301713361 extruder: Add SET_PRESSURE_ADVANCE command. Michael Barbour 2018-04-01 15:26:25 -04:00
  • bee179eab4 docs: Update release notes for v0.6.0 release Kevin O'Connor 2018-03-31 14:04:39 -04:00
  • 039bb9f10f docs: Add Patreon link to FAQ page Kevin O'Connor 2018-03-31 13:55:41 -04:00
  • b0b4bc8958 heater: Add some comments to the thermistor math Kevin O'Connor 2018-03-29 14:15:16 -04:00
  • a6553538e6 docs: Update G-Codes.md with recent output_pin changes Kevin O'Connor 2018-03-28 15:11:10 -04:00
  • 019666a6f6 docs: Add a section on adding new host modules to Code_Overview.md Kevin O'Connor 2018-03-28 13:01:24 -04:00
  • 7579b9671b stepstats: Add documentation clarification Kevin O'Connor 2017-03-08 13:55:47 -05:00
  • 99f3c99238 display: Round temperature and position to nearest whole number Kevin O'Connor 2018-03-19 15:17:53 -04:00
  • aba04bf3bd display: Remove unneeded semicolons from file Kevin O'Connor 2018-03-19 15:16:01 -04:00
  • f5c67baac2 docs: Recommend running PID_CALIBRATE in Config_checks.md Kevin O'Connor 2018-03-18 12:43:41 -04:00
  • 973ef97143 pid_calibrate: Move PID calibration logic from heater.py to new file Kevin O'Connor 2018-03-18 11:23:20 -04:00
  • 310cdf88cc config: Remove tabs from printer-wanhao-duplicator-i3-v2.1-2017.cfg Kevin O'Connor 2018-03-18 11:32:28 -04:00
  • 5c05a24947 docs: Fix typo in M220 description in G-Codes.md Kevin O'Connor 2018-03-18 11:29:40 -04:00
  • c93dad8eba config: Update generic-cramps.cfg with P9_23 machine enable Kevin O'Connor 2018-03-18 10:33:40 -04:00
  • fb3065cfa7 config: Change pullup_resistor to 2000 in generic-cramps.cfg Kevin O'Connor 2018-03-17 14:18:49 -04:00
  • e3f9ff6701 probe: Add z_offset parameter Kevin O'Connor 2018-03-17 14:00:37 -04:00
  • c95cc3fb66 bed_tilt: Take into account the XY position used with z_virtual_endstop Kevin O'Connor 2018-03-12 20:10:46 -04:00
  • 1dda4628a0 bed_tilt: Require at least 3 probing points for bed_tilt_calibrate Kevin O'Connor 2018-03-12 18:48:44 -04:00
  • 36612fd544 probe: Default z_position to the configured minimum position on Z axis Kevin O'Connor 2018-03-14 15:30:58 -04:00
  • ef8c464d97 output_pin: Move pwm and digital output pins to new module in extras/ Kevin O'Connor 2018-03-17 13:29:03 -04:00
  • 66eefa1da8 static_digital_output: Add static_digital_output section to extras/ Kevin O'Connor 2018-03-17 13:05:40 -04:00
  • e78377eebd replicape: Add config controls for the servo[01]_enable lines Kevin O'Connor 2018-03-12 18:32:29 -04:00
  • 451f7d5672 gcode: Position returned by M114 should be relative to last G92 Kevin O'Connor 2018-03-09 21:43:24 -05:00
  • ef820d98f6 docs: Add "will heaters be turned off on a crash" item to FAQ Kevin O'Connor 2018-03-13 11:26:15 -04:00
  • 9dfe612516 verify_heater: Provide additional information on a heater error Kevin O'Connor 2018-03-12 23:21:54 -04:00
  • 830cfc5414 klippy: Rework starting error message Kevin O'Connor 2018-03-12 23:12:39 -04:00
  • 45afa04578 probe: Add some hints for common errors during PROBE Kevin O'Connor 2018-03-12 22:51:44 -04:00
  • 9bc4239e9c gcode: On a multi-line error message, report the first line twice Kevin O'Connor 2018-03-12 22:37:14 -04:00
  • 3a1cdc7d70 virtual_sdcard: Fix typo in seek error handling Kevin O'Connor 2018-03-12 22:36:39 -04:00
  • 3a75748762 config: Reword the min_temp/max_temp description in example.cfg Kevin O'Connor 2018-03-12 14:37:02 -04:00
  • e336c24665 heater: Allow min_temp to go below zero Kevin O'Connor 2018-03-12 14:36:45 -04:00
  • 849f4ed25f verify_heater: Scale hysteresis duration check Kevin O'Connor 2018-03-11 19:16:55 -04:00
  • 57d342b455 verify_heater: Change default hysteresis to 10 degrees Kevin O'Connor 2018-03-11 13:22:45 -04:00
  • 5208fc38ed verify_heater: Add initial support for verifying heaters and sensors Kevin O'Connor 2018-03-11 00:22:44 -05:00
  • b549c3927e klippy: Allow external callers of try_load_module() Kevin O'Connor 2018-03-07 14:41:09 -05:00
  • e53a589ac3 docs: Add SET_DUAL_CARRIAGE command to G-Codes.md Kevin O'Connor 2018-03-10 20:20:48 -05:00
  • 4d48c111d8 cartesian: Initial support for dual carriages Kevin O'Connor 2018-03-02 14:11:00 -05:00
  • 6c1e1dcc8d display: Use separate hd44780 screen drawing Kevin O'Connor 2018-03-06 11:16:25 -05:00
  • ddcf9a7ff7 docs: Add Tx command to G-Codes.md Kevin O'Connor 2018-03-08 14:40:26 -05:00
  • 05ec7ca7ff docs: Add a G-Codes.md file with the list of available commands Kevin O'Connor 2018-03-08 14:06:24 -05:00
  • ef0c80af51 config: Add working printer configuration for Wanhao Duplicator i3 v2.1 ghandye 2018-03-06 21:19:10 -06:00
  • d997821e58 config: Add LCD configuration to printer-trony-x5s-2017.cfg christian mock 2018-03-07 21:12:58 +01:00
  • 385e6b67d9 config: Add display section to creality cr10 config Kevin O'Connor 2018-03-07 13:36:44 -05:00
  • 04602b2470 display: Choose arrow character based on display Marcio Teixeira 2018-02-21 08:15:20 -07:00
  • 923954772f homing: allow to disable homing retract cruwaller 2018-03-06 08:59:13 +02:00
  • 5a16863465 config: Fix hd44780 typo in rambo and ramps example configs Kevin O'Connor 2018-03-06 13:15:09 -05:00
  • 08a5f8a5ff display: Add initial support for LCD screens attached to an MCU Kevin O'Connor 2018-02-20 20:50:06 -05:00
  • 43ac56766e serialqueue: Support sending messages at a background priority Kevin O'Connor 2018-02-11 18:49:27 -05:00
  • afc9bcf27b lcd_hd44780: Add micro-controller code for the HD44780 LCD chip Kevin O'Connor 2018-02-20 20:48:26 -05:00
  • 9140f36d99 lcd_st7920: Add micro-controller code for the ST7920 LCD chip Kevin O'Connor 2018-02-20 20:47:02 -05:00
  • fa07be9346 mathutil: Move coordinate_descent() to new file Kevin O'Connor 2018-03-02 18:18:35 -05:00
  • 7290ed5f73 clocksync: Fix multi-mcu frequency adjustments with long moves Kevin O'Connor 2018-03-03 21:54:25 -05:00
  • fc60bda4d1 virtual_sdcard: Remove trailing '*' checksum indicator from M23 command Kevin O'Connor 2018-03-02 11:58:00 -05:00
  • 82a65e9f4a docs: Note the use of the virtual_sdcard feature Kevin O'Connor 2018-03-02 11:28:01 -05:00
  • b139a8561f serialhdl: Add a wrapper around the results of lookup_command() Kevin O'Connor 2018-02-27 14:16:16 -05:00
  • 8518da9824 config: Move description of phase adjusted endstops to config-extra.cfg Kevin O'Connor 2018-02-27 09:34:25 -05:00
  • 656cb2c417 build: Use git describe --always Kevin O'Connor 2018-02-26 21:50:05 -05:00
  • 239c1ad5c9 serialqueue: Don't clear must_exit flag at start of pollreactor_run() Kevin O'Connor 2018-02-26 16:19:56 -05:00
  • 7733e1d832 test: Add travis_fold markers to build output Kevin O'Connor 2018-02-26 15:21:39 -05:00
  • 99b4122901 test: Add compile tests for at90usb1286 and atmega1284p chips Kevin O'Connor 2018-02-26 15:03:05 -05:00
  • 28d70eaf0c test: Update travis build to include a basic klippy host test Kevin O'Connor 2018-02-26 14:20:11 -05:00
  • 5d635c5252 config: Use .0025 as the default z step_distance in sample configs Kevin O'Connor 2018-02-25 16:00:55 -05:00
  • 22d7e48aa2 config: Add an example config file that uses multiple MCUs Kevin O'Connor 2018-02-25 12:55:11 -05:00
  • a6b0649cb1 test: Add travis CI Sebastian Meyer 2018-02-01 22:49:50 +01:00
  • 58dd6d9106 build: Link objects ahead of libraries to avoid failures on some platforms Sebastian Meyer 2018-02-02 01:28:06 +01:00
  • d139389267 avr: Add at90usb646 support Douglas Hammond 2018-02-23 15:57:14 -05:00
  • e99c0f53f8 graphstats: Support selecting an mcu to graph from the command-line Kevin O'Connor 2018-02-19 23:12:14 -05:00
  • 02ae2ab984 clocksync: Rework multi-mcu adjust to better handle long moves Kevin O'Connor 2018-02-19 22:13:28 -05:00
  • 97f7735c6a graphstats: Set size on frequency graph Kevin O'Connor 2018-02-18 20:42:28 -05:00