tilsonm f183871e28 config: Adopt Anet A8 cfg, Anet v1.0-1.5 Boards ...

This configuration file should work as a base for Anet A8 printers
using the stock Anet v1.0-1.5 boards from late 2016-2017, which are
based around the AVR atmega1284p. Minor tweaks may be required to such
things as /dev/serial/by-id/, thermistor sensor types, and offsets for
carriage and bed.

Signed-off-by: Matt Tilson <tilsonm09@gmail.com>

2018-01-07 22:22:08 -05:00

..

anet-a8-2017.cfg

config: Adopt Anet A8 cfg, Anet v1.0-1.5 Boards

2018-01-07 22:22:08 -05:00

avrsim.cfg

heater: Rename thermistor_type config name to sensor_type

2017-03-13 00:46:33 -04:00

example-corexy.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

example-delta.cfg

delta: Default stepper_b/c position_endstop to stepper_a's

2017-12-08 18:20:04 -05:00

example-extras.cfg

chipmisc: Add multi_pin capability

2017-12-18 21:00:06 -05:00

example.cfg

heater: Added config for heater PWM cycle time.

2018-01-03 12:32:11 -05:00

generic-cramps.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

generic-melzi.cfg

config: Note the need to flash a bootloader on the Melzi

2018-01-05 10:23:58 -05:00

generic-printrboard.cfg

config: Add a generic-printrboard.cfg file

2017-10-30 10:56:08 -04:00

generic-rambo.cfg

config: List E1 micro-step pins in order in generic-rambo.cfg

2017-11-08 11:14:37 -05:00

generic-ramps.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

generic-replicape.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

lulzbot-taz6-2017.cfg

config: Update TAZ6 defaults for hotend

2018-01-04 10:58:47 -05:00

makergear-m2-2012.cfg

chipmisc: Add support for configuring ad5206 digipots

2017-08-26 18:27:21 -04:00

wanhao-duplicator-i3-plus-2017.cfg

config: Added Wanhao Duplicator i3 Plus configuration

2018-01-04 12:10:01 -05:00