Gareth Farrington 055f07c638 ads1220: Add ADS1220 bulk sensor to load_cell ...

Add support for the ADS1220 as an alternative to HX71x that supports SPI and higher sample rates.

Signed-off-by: Gareth Farrington <gareth@waves.ky>

2024-07-31 21:22:33 -04:00

..

ar100

Kconfig: Support selecting optional features on chips with small flash size

2023-06-08 12:59:30 -04:00

atsam

armcm_link: Fix build on recent arm gcc/newlibc versions

2024-06-17 12:45:07 -04:00

atsamd

armcm_link: Fix build on recent arm gcc/newlibc versions

2024-06-17 12:45:07 -04:00

avr

avr: enable small code size options for atmega32u4

2024-03-02 18:47:16 -05:00

generic

armcm_link: Fix build on recent arm gcc/newlibc versions

2024-06-17 12:45:07 -04:00

hc32f460

armcm_link: Fix build on recent arm gcc/newlibc versions

2024-06-17 12:45:07 -04:00

linux

linux: Don't use absolute paths for include

2024-04-03 22:53:09 -04:00

lpc176x

armcm_link: Fix build on recent arm gcc/newlibc versions

2024-06-17 12:45:07 -04:00

pru

command: Support 2-byte message ids

2024-06-10 12:27:12 -04:00

rp2040

rp2040_link: Explicitly set klipper.elf output section flags to avoid warning

2024-06-17 12:45:07 -04:00

simulator

command: Fix handling of buffer passing in args[] on 64bit mcu

2020-10-30 14:04:12 -04:00

stm32

armcm_link: Fix build on recent arm gcc/newlibc versions

2024-06-17 12:45:07 -04:00

adccmds.c

adccmds: Run gpio_adc_setup() before oid_alloc()

2019-01-13 11:03:30 -05:00

basecmd.c

mcu: Make a minor change to the protocol to require mcu update

2021-11-06 18:47:44 -04:00

basecmd.h

stepper: Use a reusable interface to the "move queue"

2020-12-04 16:10:13 -05:00

buttons.c

buttons: initialize mcu buttons based on inverted state

2019-07-05 20:01:07 -04:00

byteorder.h

byteorder: Add a header file defining common byteswap functions

2018-05-21 09:44:40 -04:00

command.c

command: Support 2-byte message ids

2024-06-10 12:27:12 -04:00

command.h

command: Support 2-byte message ids

2024-06-10 12:27:12 -04:00

compiler.h

compiler.h: Check if __aligned and __section macros are already defined

2016-06-13 23:18:59 -04:00

ctr.h

ctr: Encode negative integers in normal hex notation

2019-08-22 13:06:44 -04:00

debugcmds.c

debugcmds: Remove start/end_group commands

2021-05-07 13:53:47 -04:00

endstop.c

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00

gpiocmds.c

gpiocmds: Merge digital output and soft pwm code

2020-12-10 12:06:26 -05:00

i2c_software.c

i2c_software: Implementation of software i2c (#6141)

2023-06-07 20:55:46 -04:00

i2c_software.h

i2c_software: Implementation of software i2c (#6141)

2023-06-07 20:55:46 -04:00

i2ccmds.c

Kconfig: Support selecting optional features on chips with small flash size

2023-06-08 12:59:30 -04:00

i2ccmds.h

i2c_software: Implementation of software i2c (#6141)

2023-06-07 20:55:46 -04:00

initial_pins.c

initial_pins: Add check to reduce compile time size when not in use

2022-12-16 22:46:47 -05:00

initial_pins.h

initial_pins: Add ability to configure output pins at mcu startup

2019-03-17 20:56:25 -04:00

Kconfig

ads1220: Add ADS1220 bulk sensor to load_cell

2024-07-31 21:22:33 -04:00

lcd_hd44780.c

lcd_st7920: Check CONFIG_MACH_AVR for slow mcus

2021-07-04 10:11:02 -04:00

lcd_st7920.c

lcd_st7920: Check CONFIG_MACH_AVR for slow mcus

2021-07-04 10:11:02 -04:00

Makefile

ads1220: Add ADS1220 bulk sensor to load_cell

2024-07-31 21:22:33 -04:00

neopixel.c

neopixel: Fix neopixel_result message so that it contains an oid

2020-11-05 11:40:34 -05:00

pulse_counter.c

pulse_counter: Use "clock" suffix instead of "time" in commands

2021-04-30 11:40:37 -04:00

pwmcmds.c

pwmcmds: Use move queue for hard PWM

2020-12-04 16:10:13 -05:00

sched.c

sched: Move last_insert check for improved gcc code layout

2021-11-09 20:20:24 -05:00

sched.h

pru: Support config_reset command to manually reset mcu

2017-09-03 23:16:38 -04:00

sdiocmds.c

stm32: Add sdio support

2023-02-20 19:55:25 -05:00

sdiocmds.h

stm32: Add sdio support

2023-02-20 19:55:25 -05:00

sensor_ads1220.c

ads1220: Add ADS1220 bulk sensor to load_cell

2024-07-31 21:22:33 -04:00

sensor_adxl345.c

sensor_adxl345: No need to schedule start of bulk reading

2024-01-19 11:55:15 -05:00

sensor_angle.c

sensor_bulk: New C file with helper code for sending bulk sensor measurements

2024-01-19 11:55:15 -05:00

sensor_bulk.c

sensor_bulk: New C file with helper code for sending bulk sensor measurements

2024-01-19 11:55:15 -05:00

sensor_bulk.h

sensor_bulk: Change maximum data size from 52 to 51 bytes

2024-06-10 12:27:12 -04:00

sensor_hx71x.c

hx71x: Load Cell Skeleton and HX71x bulk ADC

2024-07-31 21:22:06 -04:00

sensor_ldc1612.c

sensor_bulk: Change maximum data size from 52 to 51 bytes

2024-06-10 12:27:12 -04:00

sensor_lis2dw.c

sensor_lis2dw: No need to schedule start of bulk reading

2024-01-19 11:55:15 -05:00

sensor_mpu9250.c

sensor_mpu9250: No need to schedule start of bulk reading

2024-01-19 11:55:15 -05:00

spi_software.c

spi_software: Remove unused include file

2019-08-17 13:49:03 -04:00

spi_software.h

spi_software: Implementation of software spi

2019-02-13 11:52:20 -05:00

spicmds.c

Kconfig: Support selecting optional features on chips with small flash size

2023-06-08 12:59:30 -04:00

spicmds.h

sensor_angle: Add support for bulk querying of spi angle sensors

2022-03-29 20:34:46 -04:00

stepper.c

stepper: Move min_next_time check to stepper_event_full()

2021-11-04 12:06:27 -04:00

stepper.h

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00

thermocouple.c

thermocouple: Only shutdown on multiple consecutive sensor errors

2022-09-23 11:56:20 -04:00

tmcuart.c

command: Add command_decode_ptr() helper

2020-10-30 14:04:08 -04:00

trsync.c

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00

trsync.h

trsync: Introduce new "trigger synchronization" support

2021-06-09 18:58:35 -04:00