Kevin O'Connor 2ea7c97bbd stepper: Support configuring the stepper pulse length from Kconfig ...

Allow the stepper pulse length to be configured at compile time from
the Kconfig menu system.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2019-01-09 13:16:42 -05:00

..

adc.c

avr: Split gpio.c into gpio.c, adc.c, hard_pwm.c, and spi.c

2018-11-20 12:58:33 -05:00

gpio.c

avr: Split gpio.c into gpio.c, adc.c, hard_pwm.c, and spi.c

2018-11-20 12:58:33 -05:00

gpio.h

avr: Add support for sending I2C messages

2018-11-23 23:49:26 -05:00

hard_pwm.c

avr: Minor comment update in hard_pwm.c

2018-11-20 13:14:53 -05:00

i2c.c

i2ccmds: Pass the i2c address as a 7-bit number (0-127)

2019-01-07 20:00:44 -05:00

internal.h

avr: Split gpio.c into gpio.c, adc.c, hard_pwm.c, and spi.c

2018-11-20 12:58:33 -05:00

irq.h

avr: Do not use Idle mode

2018-04-28 21:26:42 -04:00

Kconfig

stepper: Support configuring the stepper pulse length from Kconfig

2019-01-09 13:16:42 -05:00

main.c

command: Prefer uint8_t* for buffers; prefer uint8_fast_t for lengths

2018-05-28 10:43:39 -04:00

Makefile

avr: Add support for sending I2C messages

2018-11-23 23:49:26 -05:00

pgm.h

usb_cdc: Add support for usb_send_ep0_progmem()

2018-09-30 22:32:19 -04:00

serial.c

avr: Clean up serial port register aliases

2018-04-25 10:55:18 -04:00

spi.c

spicmds: Check for an incorrect mode in spicmds.c

2018-11-30 11:50:48 -05:00

timer.c

avr: Clear the TCNT1 register on timer startup

2018-01-07 22:22:08 -05:00

usbserial.c

usb_cdc: Add support for detecting a USB level Arduino bootloader request

2018-12-24 11:42:19 -05:00

watchdog.c

build: Use compile_time_request system for init, tasks, and shutdown

2017-05-26 12:39:34 -04:00