Kevin O'Connor f5c0148665 config: Warn Beaglebone PRU users that pinmux settings are not updated ...

The Beaglebone hardware prevents the PRU from updating the pinmux
board settings.  As a result, the PRU can't directly change the pin
direction or change the pullup resistor settings.  Warn the Beaglebone
users of this limitation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2017-10-25 11:01:36 -04:00

..

avrsim.cfg

heater: Rename thermistor_type config name to sensor_type

2017-03-13 00:46:33 -04:00

example-corexy.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

example-delta.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

example-extras.cfg

fan: Enable heater_fan objects on an MCU shutdown event

2017-10-12 11:59:27 -04:00

example.cfg

serialhdl: Don't open port at 1200 baud

2017-10-12 21:46:09 -04:00

generic-cramps.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

generic-melzi.cfg

config: Add generic-melzi.cfg file for Melzi boards

2017-10-12 12:43:13 -04:00

generic-rambo.cfg

chipmisc: Add support for configuring ad5206 digipots

2017-08-26 18:27:21 -04:00

generic-ramps.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

generic-replicape.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

makergear-m2-2012.cfg

chipmisc: Add support for configuring ad5206 digipots

2017-08-26 18:27:21 -04:00