From 4ad8d57d902fbc7c82507cfc1b031f3a07c3de6e Mon Sep 17 00:00:00 2001 From: Shradha Gupta Date: Thu, 1 Feb 2024 22:43:28 -0800 Subject: [PATCH 01/87] drm: Check output polling initialized before disabling commit 5abffb66d12bcac84bf7b66389c571b8bb6e82bd upstream. In drm_kms_helper_poll_disable() check if output polling support is initialized before disabling polling. If not flag this as a warning. Additionally in drm_mode_config_helper_suspend() and drm_mode_config_helper_resume() calls, that re the callers of these functions, avoid invoking them if polling is not initialized. For drivers like hyperv-drm, that do not initialize connector polling, if suspend is called without this check, it leads to suspend failure with following stack [ 770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 770.720592] printk: Suspending console(s) (use no_console_suspend to debug) [ 770.948823] ------------[ cut here ]------------ [ 770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230 [ 770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod [ 770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1 [ 770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230 [ 770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00 [ 770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246 [ 770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857 [ 770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330 [ 770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10 [ 770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330 [ 770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 [ 770.948875] FS: 00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000 [ 770.948878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0 [ 770.948879] Call Trace: [ 770.948880] [ 770.948881] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948884] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948886] ? __cancel_work_timer+0x103/0x190 [ 770.948887] ? __flush_work.isra.0+0x212/0x230 [ 770.948889] ? __warn+0x81/0x110 [ 770.948891] ? __flush_work.isra.0+0x212/0x230 [ 770.948892] ? report_bug+0x10a/0x140 [ 770.948895] ? handle_bug+0x3c/0x70 [ 770.948898] ? exc_invalid_op+0x14/0x70 [ 770.948899] ? asm_exc_invalid_op+0x16/0x20 [ 770.948903] ? __flush_work.isra.0+0x212/0x230 [ 770.948905] __cancel_work_timer+0x103/0x190 [ 770.948907] ? _raw_spin_unlock_irqrestore+0xa/0x30 [ 770.948910] drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper] [ 770.948923] drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper] [ 770.948933] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948942] hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm] [ 770.948944] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948951] dpm_run_callback+0x4c/0x140 [ 770.948954] __device_suspend_noirq+0x74/0x220 [ 770.948956] dpm_noirq_suspend_devices+0x148/0x2a0 [ 770.948958] dpm_suspend_end+0x54/0xe0 [ 770.948960] create_image+0x14/0x290 [ 770.948963] hibernation_snapshot+0xd6/0x200 [ 770.948964] hibernate.cold+0x8b/0x1fb [ 770.948967] state_store+0xcd/0xd0 [ 770.948969] kernfs_fop_write_iter+0x124/0x1b0 [ 770.948973] new_sync_write+0xff/0x190 [ 770.948976] vfs_write+0x1ef/0x280 [ 770.948978] ksys_write+0x5f/0xe0 [ 770.948979] do_syscall_64+0x5c/0x90 [ 770.948981] ? syscall_exit_work+0x103/0x130 [ 770.948983] ? syscall_exit_to_user_mode+0x12/0x30 [ 770.948985] ? do_syscall_64+0x69/0x90 [ 770.948986] ? do_syscall_64+0x69/0x90 [ 770.948987] ? do_user_addr_fault+0x1d6/0x6a0 [ 770.948989] ? do_syscall_64+0x69/0x90 [ 770.948990] ? exc_page_fault+0x62/0x150 [ 770.948992] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 770.948995] RIP: 0033:0x7ff1b293eba7 [ 770.949010] Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 770.949011] RSP: 002b:00007ffde3912128 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 770.949012] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007ff1b293eba7 [ 770.949013] RDX: 0000000000000005 RSI: 00007ffde3912210 RDI: 0000000000000004 [ 770.949014] RBP: 00007ffde3912210 R08: 000055d7dd4c9510 R09: 00007ff1b29b14e0 [ 770.949014] R10: 00007ff1b29b13e0 R11: 0000000000000246 R12: 0000000000000005 [ 770.949015] R13: 000055d7dd4c53e0 R14: 0000000000000005 R15: 00007ff1b29f69e0 [ 770.949016] [ 770.949017] ---[ end trace e6fa0618bfa2f31d ]--- Built-on: Rhel9, Ubuntu22 Signed-off-by: Shradha Gupta Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1706856208-9617-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/drm_modeset_helper.c | 19 ++++++++++++++++--- drivers/gpu/drm/drm_probe_helper.c | 12 ++++++++++-- 2 files changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_modeset_helper.c b/drivers/gpu/drm/drm_modeset_helper.c index f858dfedf2cf..2c582020cb42 100644 --- a/drivers/gpu/drm/drm_modeset_helper.c +++ b/drivers/gpu/drm/drm_modeset_helper.c @@ -193,13 +193,22 @@ int drm_mode_config_helper_suspend(struct drm_device *dev) if (!dev) return 0; + /* + * Don't disable polling if it was never initialized + */ + if (dev->mode_config.poll_enabled) + drm_kms_helper_poll_disable(dev); - drm_kms_helper_poll_disable(dev); drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 1); state = drm_atomic_helper_suspend(dev); if (IS_ERR(state)) { drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0); - drm_kms_helper_poll_enable(dev); + /* + * Don't enable polling if it was never initialized + */ + if (dev->mode_config.poll_enabled) + drm_kms_helper_poll_enable(dev); + return PTR_ERR(state); } @@ -239,7 +248,11 @@ int drm_mode_config_helper_resume(struct drm_device *dev) dev->mode_config.suspend_state = NULL; drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0); - drm_kms_helper_poll_enable(dev); + /* + * Don't enable polling if it is not initialized + */ + if (dev->mode_config.poll_enabled) + drm_kms_helper_poll_enable(dev); return ret; } diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 52dbaf74fe16..85627ee107f0 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -235,6 +235,9 @@ drm_connector_mode_valid(struct drm_connector *connector, * Drivers can call this helper from their device resume implementation. It is * not an error to call this even when output polling isn't enabled. * + * If device polling was never initialized before, this call will trigger a + * warning and return. + * * Note that calls to enable and disable polling must be strictly ordered, which * is automatically the case when they're only call from suspend/resume * callbacks. @@ -246,7 +249,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev) struct drm_connector_list_iter conn_iter; unsigned long delay = DRM_OUTPUT_POLL_PERIOD; - if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) + if (drm_WARN_ON_ONCE(dev, !dev->mode_config.poll_enabled) || + !drm_kms_helper_poll || dev->mode_config.poll_running) return; drm_connector_list_iter_begin(dev, &conn_iter); @@ -821,14 +825,18 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker); * not an error to call this even when output polling isn't enabled or already * disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable(). * + * If however, the polling was never initialized, this call will trigger a + * warning and return + * * Note that calls to enable and disable polling must be strictly ordered, which * is automatically the case when they're only call from suspend/resume * callbacks. */ void drm_kms_helper_poll_disable(struct drm_device *dev) { - if (!dev->mode_config.poll_enabled) + if (drm_WARN_ON(dev, !dev->mode_config.poll_enabled)) return; + cancel_delayed_work_sync(&dev->mode_config.output_poll_work); } EXPORT_SYMBOL(drm_kms_helper_poll_disable); From a17e06d709bd09889a6252d9030869323a40f3c6 Mon Sep 17 00:00:00 2001 From: Shradha Gupta Date: Thu, 1 Feb 2024 22:43:44 -0800 Subject: [PATCH 02/87] drm: Check polling initialized before enabling in drm_helper_probe_single_connector_modes commit 048a36d8a6085bbd8ab9e5794b713b92ac986450 upstream. In function drm_helper_probe_single_connector_modes() when we enable polling again, if it is already uninitialized, a warning is reported. This patch fixes the warning message by checking if poll is initialized before enabling it. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202401191128.db8423f1-oliver.sang@intel.com Signed-off-by: Shradha Gupta Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1706856224-9725-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/drm_probe_helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 85627ee107f0..0e5eadc6d44d 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -574,7 +574,8 @@ retry: } /* Re-enable polling in case the global poll config changed. */ - if (drm_kms_helper_poll != dev->mode_config.poll_running) + if (dev->mode_config.poll_enabled && + (drm_kms_helper_poll != dev->mode_config.poll_running)) drm_kms_helper_poll_enable(dev); dev->mode_config.poll_running = drm_kms_helper_poll; From cf0df4352041e3a870a3987fb79410b516eed0d3 Mon Sep 17 00:00:00 2001 From: Dan Gora Date: Tue, 9 May 2023 12:51:19 -0700 Subject: [PATCH 03/87] Bluetooth: btrtl: Add missing MODULE_FIRMWARE declarations commit bb23f07cb63975968bbabe314486e2b087234fc5 upstream. Add missing MODULE_FIRMWARE declarations for firmware referenced in btrtl.c. Signed-off-by: Dan Gora Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- drivers/bluetooth/btrtl.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index ead632595ce0..5671f0d9ab28 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -1074,19 +1074,33 @@ MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8723d_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8723d_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8761b_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8761b_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8761bu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8761bu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8821c_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8821c_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8821cs_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8821cs_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8822cs_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8822cs_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8822cu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8822cu_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); -MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin"); -MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin"); From 34f3005303582d756fe33f8aa90d74c3820fee74 Mon Sep 17 00:00:00 2001 From: Peng Zhang Date: Wed, 19 Apr 2023 17:36:25 +0800 Subject: [PATCH 04/87] maple_tree: fix allocation in mas_sparse_area() commit 29ad6bb313487370f9dfe5441fc8982593b6384e upstream. In the case of reverse allocation, mas->index and mas->last do not point to the correct allocation range, which will cause users to get incorrect allocation results, so fix it. If the user does not use it in a specific way, this bug will not be triggered. This is a bug, but only VMA uses it now, the way VMA is used now will not trigger it. There is a possibility that a user will trigger it in the future. Also re-check whether the size is still satisfied after the lower bound was increased, which is a corner case and is incorrect in previous versions. Link: https://lkml.kernel.org/r/20230419093625.99201-1-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang Cc: Liam R. Howlett Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- lib/maple_tree.c | 41 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 21 deletions(-) diff --git a/lib/maple_tree.c b/lib/maple_tree.c index 4976522e3e48..06a97816e9ce 100644 --- a/lib/maple_tree.c +++ b/lib/maple_tree.c @@ -5277,25 +5277,28 @@ static inline void mas_fill_gap(struct ma_state *mas, void *entry, * @size: The size of the gap * @fwd: Searching forward or back */ -static inline void mas_sparse_area(struct ma_state *mas, unsigned long min, +static inline int mas_sparse_area(struct ma_state *mas, unsigned long min, unsigned long max, unsigned long size, bool fwd) { - unsigned long start = 0; - - if (!unlikely(mas_is_none(mas))) - start++; + if (!unlikely(mas_is_none(mas)) && min == 0) { + min++; + /* + * At this time, min is increased, we need to recheck whether + * the size is satisfied. + */ + if (min > max || max - min + 1 < size) + return -EBUSY; + } /* mas_is_ptr */ - if (start < min) - start = min; - if (fwd) { - mas->index = start; - mas->last = start + size - 1; - return; + mas->index = min; + mas->last = min + size - 1; + } else { + mas->last = max; + mas->index = max - size + 1; } - - mas->index = max; + return 0; } /* @@ -5324,10 +5327,8 @@ int mas_empty_area(struct ma_state *mas, unsigned long min, return -EBUSY; /* Empty set */ - if (mas_is_none(mas) || mas_is_ptr(mas)) { - mas_sparse_area(mas, min, max, size, true); - return 0; - } + if (mas_is_none(mas) || mas_is_ptr(mas)) + return mas_sparse_area(mas, min, max, size, true); /* The start of the window can only be within these values */ mas->index = min; @@ -5377,10 +5378,8 @@ int mas_empty_area_rev(struct ma_state *mas, unsigned long min, } /* Empty set. */ - if (mas_is_none(mas) || mas_is_ptr(mas)) { - mas_sparse_area(mas, min, max, size, false); - return 0; - } + if (mas_is_none(mas) || mas_is_ptr(mas)) + return mas_sparse_area(mas, min, max, size, false); /* The start of the window can only be within these values. */ mas->index = min; From 883e5d542bbdddbddeba60250cb482baf3ae2415 Mon Sep 17 00:00:00 2001 From: "Liam R. Howlett" Date: Mon, 22 Apr 2024 16:33:49 -0400 Subject: [PATCH 05/87] maple_tree: fix mas_empty_area_rev() null pointer dereference commit 955a923d2809803980ff574270f81510112be9cf upstream. Currently the code calls mas_start() followed by mas_data_end() if the maple state is MA_START, but mas_start() may return with the maple state node == NULL. This will lead to a null pointer dereference when checking information in the NULL node, which is done in mas_data_end(). Avoid setting the offset if there is no node by waiting until after the maple state is checked for an empty or single entry state. A user could trigger the events to cause a kernel oops by unmapping all vmas to produce an empty maple tree, then mapping a vma that would cause the scenario described above. Link: https://lkml.kernel.org/r/20240422203349.2418465-1-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett Reported-by: Marius Fleischer Closes: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/ Tested-by: Marius Fleischer Tested-by: Sidhartha Kumar Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- lib/maple_tree.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/lib/maple_tree.c b/lib/maple_tree.c index 06a97816e9ce..9a5bdf1e8e92 100644 --- a/lib/maple_tree.c +++ b/lib/maple_tree.c @@ -5368,18 +5368,18 @@ int mas_empty_area_rev(struct ma_state *mas, unsigned long min, if (min >= max) return -EINVAL; - if (mas_is_start(mas)) { + if (mas_is_start(mas)) mas_start(mas); - mas->offset = mas_data_end(mas); - } else if (mas->offset >= 2) { - mas->offset -= 2; - } else if (!mas_rewind_node(mas)) { + else if ((mas->offset < 2) && (!mas_rewind_node(mas))) return -EBUSY; - } - /* Empty set. */ - if (mas_is_none(mas) || mas_is_ptr(mas)) + if (unlikely(mas_is_none(mas) || mas_is_ptr(mas))) return mas_sparse_area(mas, min, max, size, false); + else if (mas->offset >= 2) + mas->offset -= 2; + else + mas->offset = mas_data_end(mas); + /* The start of the window can only be within these values. */ mas->index = min; From 265426254d2808a40ef6523e9b48299d6a7c2661 Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Wed, 3 Jan 2024 12:29:11 +0100 Subject: [PATCH 06/87] mmc: core: Do not force a retune before RPMB switch commit 67380251e8bbd3302c64fea07f95c31971b91c22 upstream. Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by: Jorge Ramirez-Ortiz Acked-by: Avri Altman Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io Signed-off-by: Ulf Hansson Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/core/host.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 25c152ef5d60..67230d486c28 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -119,13 +119,12 @@ void mmc_retune_enable(struct mmc_host *host) /* * Pause re-tuning for a small set of operations. The pause begins after the - * next command and after first doing re-tuning. + * next command. */ void mmc_retune_pause(struct mmc_host *host) { if (!host->retune_paused) { host->retune_paused = 1; - mmc_retune_needed(host); mmc_retune_hold(host); } } From bc20a0a290670795b48517df0f8d2647ff8ff5d5 Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Fri, 24 May 2024 17:17:55 +0100 Subject: [PATCH 07/87] afs: Don't cross .backup mountpoint from backup volume commit 29be9100aca2915fab54b5693309bc42956542e5 upstream. Don't cross a mountpoint that explicitly specifies a backup volume (target is .backup) when starting from a backup volume. It it not uncommon to mount a volume's backup directly in the volume itself. This can cause tools that are not paying attention to get into a loop mounting the volume onto itself as they attempt to traverse the tree, leading to a variety of problems. This doesn't prevent the general case of loops in a sequence of mountpoints, but addresses a common special case in the same way as other afs clients. Reported-by: Jan Henrik Sylvester Link: http://lists.infradead.org/pipermail/linux-afs/2024-May/008454.html Reported-by: Markus Suvanto Link: http://lists.infradead.org/pipermail/linux-afs/2024-February/008074.html Signed-off-by: Marc Dionne Signed-off-by: David Howells Link: https://lore.kernel.org/r/768760.1716567475@warthog.procyon.org.uk Reviewed-by: Jeffrey Altman cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman --- fs/afs/mntpt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c index 97f50e9fd9eb..297487ee8323 100644 --- a/fs/afs/mntpt.c +++ b/fs/afs/mntpt.c @@ -140,6 +140,11 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt) put_page(page); if (ret < 0) return ret; + + /* Don't cross a backup volume mountpoint from a backup volume */ + if (src_as->volume && src_as->volume->type == AFSVL_BACKVOL && + ctx->type == AFSVL_BACKVOL) + return -ENODEV; } return 0; From 79fc40a29d4b1d28205ab700e72ae84f00564439 Mon Sep 17 00:00:00 2001 From: Haorong Lu Date: Thu, 3 Aug 2023 15:44:54 -0700 Subject: [PATCH 08/87] riscv: signal: handle syscall restart before get_signal commit ce4f78f1b53d3327fbd32764aa333bf05fb68818 upstream. In the current riscv implementation, blocking syscalls like read() may not correctly restart after being interrupted by ptrace. This problem arises when the syscall restart process in arch_do_signal_or_restart() is bypassed due to changes to the regs->cause register, such as an ebreak instruction. Steps to reproduce: 1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT. 2. Backup original registers and instruction at new_pc. 3. Change pc to new_pc, and inject an instruction (like ebreak) to this address. 4. Resume with PTRACE_CONT and wait for the process to stop again after executing ebreak. 5. Restore original registers and instructions, and detach from the tracee process. 6. Now the read() syscall in tracee will return -1 with errno set to ERESTARTSYS. Specifically, during an interrupt, the regs->cause changes from EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is inaccessible via ptrace so we cannot restore it. This alteration breaks the syscall restart condition and ends the read() syscall with an ERESTARTSYS error. According to include/linux/errno.h, it should never be seen by user programs. X86 can avoid this issue as it checks the syscall condition using a register (orig_ax) exposed to user space. Arm64 handles syscall restart before calling get_signal, where it could be paused and inspected by ptrace/debugger. This patch adjusts the riscv implementation to arm64 style, which also checks syscall using a kernel register (syscallno). It ensures the syscall restart process is not bypassed when changes to the cause register occur, providing more consistent behavior across various architectures. For a simplified reproduction program, feel free to visit: https://github.com/ancientmodern/riscv-ptrace-bug-demo. Signed-off-by: Haorong Lu Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.com Signed-off-by: Palmer Dabbelt Cc: Conor Dooley Signed-off-by: Greg Kroah-Hartman --- arch/riscv/kernel/signal.c | 95 ++++++++++++++++++++------------------ 1 file changed, 51 insertions(+), 44 deletions(-) diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c index dee66c9290cc..36bb15af6fa8 100644 --- a/arch/riscv/kernel/signal.c +++ b/arch/riscv/kernel/signal.c @@ -246,30 +246,6 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) sigset_t *oldset = sigmask_to_save(); int ret; - /* Are we from a system call? */ - if (regs->cause == EXC_SYSCALL) { - /* Avoid additional syscall restarting via ret_from_exception */ - regs->cause = -1UL; - /* If so, check system call restarting.. */ - switch (regs->a0) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->a0 = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { - regs->a0 = -EINTR; - break; - } - fallthrough; - case -ERESTARTNOINTR: - regs->a0 = regs->orig_a0; - regs->epc -= 0x4; - break; - } - } - rseq_signal_deliver(ksig, regs); /* Set up the stack frame */ @@ -283,34 +259,65 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) static void do_signal(struct pt_regs *regs) { + unsigned long continue_addr = 0, restart_addr = 0; + int retval = 0; struct ksignal ksig; + bool syscall = (regs->cause == EXC_SYSCALL); + /* If we were from a system call, check for system call restarting */ + if (syscall) { + continue_addr = regs->epc; + restart_addr = continue_addr - 4; + retval = regs->a0; + + /* Avoid additional syscall restarting via ret_from_exception */ + regs->cause = -1UL; + + /* + * Prepare for system call restart. We do this here so that a + * debugger will see the already changed PC. + */ + switch (retval) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + case -ERESTART_RESTARTBLOCK: + regs->a0 = regs->orig_a0; + regs->epc = restart_addr; + break; + } + } + + /* + * Get the signal to deliver. When running under ptrace, at this point + * the debugger may change all of our registers. + */ if (get_signal(&ksig)) { + /* + * Depending on the signal settings, we may need to revert the + * decision to restart the system call, but skip this if a + * debugger has chosen to restart at a different PC. + */ + if (regs->epc == restart_addr && + (retval == -ERESTARTNOHAND || + retval == -ERESTART_RESTARTBLOCK || + (retval == -ERESTARTSYS && + !(ksig.ka.sa.sa_flags & SA_RESTART)))) { + regs->a0 = -EINTR; + regs->epc = continue_addr; + } + /* Actually deliver the signal */ handle_signal(&ksig, regs); return; } - /* Did we come from a system call? */ - if (regs->cause == EXC_SYSCALL) { - /* Avoid additional syscall restarting via ret_from_exception */ - regs->cause = -1UL; - - /* Restart the system call - no handlers present */ - switch (regs->a0) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - regs->a0 = regs->orig_a0; - regs->epc -= 0x4; - break; - case -ERESTART_RESTARTBLOCK: - regs->a0 = regs->orig_a0; - regs->a7 = __NR_restart_syscall; - regs->epc -= 0x4; - break; - } - } + /* + * Handle restarting a different system call. As above, if a debugger + * has chosen to restart at a different PC, ignore the restart. + */ + if (syscall && regs->epc == restart_addr && retval == -ERESTART_RESTARTBLOCK) + regs->a7 = __NR_restart_syscall; /* * If there is no signal to deliver, we just put the saved From 86a30d6302deddb9fb97ba6fc4b04d0e870b582a Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 20 May 2024 22:26:19 +0900 Subject: [PATCH 09/87] nilfs2: fix use-after-free of timer for log writer thread commit f5d4e04634c9cf68bdf23de08ada0bb92e8befe7 upstream. Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com Fixes: fdce895ea5dd ("nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info") Signed-off-by: Ryusuke Konishi Reported-by: "Bai, Shuangpeng" Closes: https://groups.google.com/g/syzkaller/c/MK_LYqtt8ko/m/8rgdWeseAwAJ Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/nilfs2/segment.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 006df4eac9fa..dfc459a62fb3 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2159,8 +2159,10 @@ static void nilfs_segctor_start_timer(struct nilfs_sc_info *sci) { spin_lock(&sci->sc_state_lock); if (!(sci->sc_state & NILFS_SEGCTOR_COMMIT)) { - sci->sc_timer.expires = jiffies + sci->sc_interval; - add_timer(&sci->sc_timer); + if (sci->sc_task) { + sci->sc_timer.expires = jiffies + sci->sc_interval; + add_timer(&sci->sc_timer); + } sci->sc_state |= NILFS_SEGCTOR_COMMIT; } spin_unlock(&sci->sc_state_lock); @@ -2378,10 +2380,21 @@ int nilfs_construct_dsync_segment(struct super_block *sb, struct inode *inode, */ static void nilfs_segctor_accept(struct nilfs_sc_info *sci) { + bool thread_is_alive; + spin_lock(&sci->sc_state_lock); sci->sc_seq_accepted = sci->sc_seq_request; + thread_is_alive = (bool)sci->sc_task; spin_unlock(&sci->sc_state_lock); - del_timer_sync(&sci->sc_timer); + + /* + * This function does not race with the log writer thread's + * termination. Therefore, deleting sc_timer, which should not be + * done after the log writer thread exits, can be done safely outside + * the area protected by sc_state_lock. + */ + if (thread_is_alive) + del_timer_sync(&sci->sc_timer); } /** @@ -2407,7 +2420,7 @@ static void nilfs_segctor_notify(struct nilfs_sc_info *sci, int mode, int err) sci->sc_flush_request &= ~FLUSH_DAT_BIT; /* re-enable timer if checkpoint creation was not done */ - if ((sci->sc_state & NILFS_SEGCTOR_COMMIT) && + if ((sci->sc_state & NILFS_SEGCTOR_COMMIT) && sci->sc_task && time_before(jiffies, sci->sc_timer.expires)) add_timer(&sci->sc_timer); } @@ -2597,6 +2610,7 @@ static int nilfs_segctor_thread(void *arg) int timeout = 0; sci->sc_timer_task = current; + timer_setup(&sci->sc_timer, nilfs_construction_timeout, 0); /* start sync. */ sci->sc_task = current; @@ -2663,6 +2677,7 @@ static int nilfs_segctor_thread(void *arg) end_thread: /* end sync. */ sci->sc_task = NULL; + del_timer_sync(&sci->sc_timer); wake_up(&sci->sc_wait_task); /* for nilfs_segctor_kill_thread() */ spin_unlock(&sci->sc_state_lock); return 0; @@ -2726,7 +2741,6 @@ static struct nilfs_sc_info *nilfs_segctor_new(struct super_block *sb, INIT_LIST_HEAD(&sci->sc_gc_inodes); INIT_LIST_HEAD(&sci->sc_iput_queue); INIT_WORK(&sci->sc_iput_work, nilfs_iput_work_func); - timer_setup(&sci->sc_timer, nilfs_construction_timeout, 0); sci->sc_interval = HZ * NILFS_SC_DEFAULT_TIMEOUT; sci->sc_mjcp_freq = HZ * NILFS_SC_DEFAULT_SR_FREQ; @@ -2812,7 +2826,6 @@ static void nilfs_segctor_destroy(struct nilfs_sc_info *sci) down_write(&nilfs->ns_segctor_sem); - del_timer_sync(&sci->sc_timer); kfree(sci); } From 164320fc220691bc76ab690e3484384fdbb8923a Mon Sep 17 00:00:00 2001 From: Chaitanya Kumar Borah Date: Tue, 30 Apr 2024 14:48:25 +0530 Subject: [PATCH 10/87] drm/i915/audio: Fix audio time stamp programming for DP commit c66b8356273c8d22498f88e4223af47a7bf8a23c upstream. Intel hardware is capable of programming the Maud/Naud SDPs on its own based on real-time clocks. While doing so, it takes care of any deviations from the theoretical values. Programming the registers explicitly with static values can interfere with this logic. Therefore, let the HW decide the Maud and Naud SDPs on it's own. Cc: stable@vger.kernel.org # v5.17 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097 Co-developed-by: Kai Vehmanen Signed-off-by: Kai Vehmanen Signed-off-by: Chaitanya Kumar Borah Reviewed-by: Uma Shankar Signed-off-by: Animesh Manna Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/i915/display/intel_audio.c | 116 ++------------------- 1 file changed, 9 insertions(+), 107 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c index aacbc6da84ef..a5fa0682110a 100644 --- a/drivers/gpu/drm/i915/display/intel_audio.c +++ b/drivers/gpu/drm/i915/display/intel_audio.c @@ -73,19 +73,6 @@ struct intel_audio_funcs { const struct drm_connector_state *old_conn_state); }; -/* DP N/M table */ -#define LC_810M 810000 -#define LC_540M 540000 -#define LC_270M 270000 -#define LC_162M 162000 - -struct dp_aud_n_m { - int sample_rate; - int clock; - u16 m; - u16 n; -}; - struct hdmi_aud_ncts { int sample_rate; int clock; @@ -93,60 +80,6 @@ struct hdmi_aud_ncts { int cts; }; -/* Values according to DP 1.4 Table 2-104 */ -static const struct dp_aud_n_m dp_aud_n_m[] = { - { 32000, LC_162M, 1024, 10125 }, - { 44100, LC_162M, 784, 5625 }, - { 48000, LC_162M, 512, 3375 }, - { 64000, LC_162M, 2048, 10125 }, - { 88200, LC_162M, 1568, 5625 }, - { 96000, LC_162M, 1024, 3375 }, - { 128000, LC_162M, 4096, 10125 }, - { 176400, LC_162M, 3136, 5625 }, - { 192000, LC_162M, 2048, 3375 }, - { 32000, LC_270M, 1024, 16875 }, - { 44100, LC_270M, 784, 9375 }, - { 48000, LC_270M, 512, 5625 }, - { 64000, LC_270M, 2048, 16875 }, - { 88200, LC_270M, 1568, 9375 }, - { 96000, LC_270M, 1024, 5625 }, - { 128000, LC_270M, 4096, 16875 }, - { 176400, LC_270M, 3136, 9375 }, - { 192000, LC_270M, 2048, 5625 }, - { 32000, LC_540M, 1024, 33750 }, - { 44100, LC_540M, 784, 18750 }, - { 48000, LC_540M, 512, 11250 }, - { 64000, LC_540M, 2048, 33750 }, - { 88200, LC_540M, 1568, 18750 }, - { 96000, LC_540M, 1024, 11250 }, - { 128000, LC_540M, 4096, 33750 }, - { 176400, LC_540M, 3136, 18750 }, - { 192000, LC_540M, 2048, 11250 }, - { 32000, LC_810M, 1024, 50625 }, - { 44100, LC_810M, 784, 28125 }, - { 48000, LC_810M, 512, 16875 }, - { 64000, LC_810M, 2048, 50625 }, - { 88200, LC_810M, 1568, 28125 }, - { 96000, LC_810M, 1024, 16875 }, - { 128000, LC_810M, 4096, 50625 }, - { 176400, LC_810M, 3136, 28125 }, - { 192000, LC_810M, 2048, 16875 }, -}; - -static const struct dp_aud_n_m * -audio_config_dp_get_n_m(const struct intel_crtc_state *crtc_state, int rate) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dp_aud_n_m); i++) { - if (rate == dp_aud_n_m[i].sample_rate && - crtc_state->port_clock == dp_aud_n_m[i].clock) - return &dp_aud_n_m[i]; - } - - return NULL; -} - static const struct { int clock; u32 config; @@ -392,48 +325,17 @@ static void hsw_dp_audio_config_update(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct i915_audio_component *acomp = dev_priv->display.audio.component; + struct drm_i915_private *i915 = to_i915(encoder->base.dev); enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; - enum port port = encoder->port; - const struct dp_aud_n_m *nm; - int rate; - u32 tmp; - rate = acomp ? acomp->aud_sample_rate[port] : 0; - nm = audio_config_dp_get_n_m(crtc_state, rate); - if (nm) - drm_dbg_kms(&dev_priv->drm, "using Maud %u, Naud %u\n", nm->m, - nm->n); - else - drm_dbg_kms(&dev_priv->drm, "using automatic Maud, Naud\n"); - - tmp = intel_de_read(dev_priv, HSW_AUD_CFG(cpu_transcoder)); - tmp &= ~AUD_CONFIG_N_VALUE_INDEX; - tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK; - tmp &= ~AUD_CONFIG_N_PROG_ENABLE; - tmp |= AUD_CONFIG_N_VALUE_INDEX; - - if (nm) { - tmp &= ~AUD_CONFIG_N_MASK; - tmp |= AUD_CONFIG_N(nm->n); - tmp |= AUD_CONFIG_N_PROG_ENABLE; - } - - intel_de_write(dev_priv, HSW_AUD_CFG(cpu_transcoder), tmp); - - tmp = intel_de_read(dev_priv, HSW_AUD_M_CTS_ENABLE(cpu_transcoder)); - tmp &= ~AUD_CONFIG_M_MASK; - tmp &= ~AUD_M_CTS_M_VALUE_INDEX; - tmp &= ~AUD_M_CTS_M_PROG_ENABLE; - - if (nm) { - tmp |= nm->m; - tmp |= AUD_M_CTS_M_VALUE_INDEX; - tmp |= AUD_M_CTS_M_PROG_ENABLE; - } - - intel_de_write(dev_priv, HSW_AUD_M_CTS_ENABLE(cpu_transcoder), tmp); + /* Enable time stamps. Let HW calculate Maud/Naud values */ + intel_de_rmw(i915, HSW_AUD_CFG(cpu_transcoder), + AUD_CONFIG_N_VALUE_INDEX | + AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK | + AUD_CONFIG_UPPER_N_MASK | + AUD_CONFIG_LOWER_N_MASK | + AUD_CONFIG_N_PROG_ENABLE, + AUD_CONFIG_N_VALUE_INDEX); } static void From e7d48faa15dd5d300f3d7de228a23a4dc78c7667 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 29 May 2024 12:00:24 +0200 Subject: [PATCH 11/87] mptcp: avoid some duplicate code in socket option handling commit a74762675f700a5473ebe54a671a0788a5b23cc9 upstream. The mptcp_get_int_option() helper is needless open-coded in a couple of places, replace the duplicate code with the helper call. Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: David S. Miller Stable-dep-of: bd11dc4fb969 ("mptcp: fix full TCP keep-alive support") Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman --- net/mptcp/sockopt.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c index e59e46e07b5c..c3967486ce69 100644 --- a/net/mptcp/sockopt.c +++ b/net/mptcp/sockopt.c @@ -621,13 +621,11 @@ static int mptcp_setsockopt_sol_tcp_cork(struct mptcp_sock *msk, sockptr_t optva { struct mptcp_subflow_context *subflow; struct sock *sk = (struct sock *)msk; - int val; + int val, ret; - if (optlen < sizeof(int)) - return -EINVAL; - - if (copy_from_sockptr(&val, optval, sizeof(val))) - return -EFAULT; + ret = mptcp_get_int_option(msk, optval, optlen, &val); + if (ret) + return ret; lock_sock(sk); sockopt_seq_inc(msk); @@ -651,13 +649,11 @@ static int mptcp_setsockopt_sol_tcp_nodelay(struct mptcp_sock *msk, sockptr_t op { struct mptcp_subflow_context *subflow; struct sock *sk = (struct sock *)msk; - int val; + int val, ret; - if (optlen < sizeof(int)) - return -EINVAL; - - if (copy_from_sockptr(&val, optval, sizeof(val))) - return -EFAULT; + ret = mptcp_get_int_option(msk, optval, optlen, &val); + if (ret) + return ret; lock_sock(sk); sockopt_seq_inc(msk); From dc62d53f01e6c06c4f108502fe071e8ee4e60986 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 29 May 2024 12:00:25 +0200 Subject: [PATCH 12/87] mptcp: cleanup SOL_TCP handling commit 7f71a337b5152ea0e7bef408d1af53778a919316 upstream. Most TCP-level socket options get an integer from user space, and set the corresponding field under the msk-level socket lock. Reduce the code duplication moving such operations in the common code. Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: David S. Miller Stable-dep-of: bd11dc4fb969 ("mptcp: fix full TCP keep-alive support") [ Without TCP_NOTSENT_LOWAT support, as it is not in this version, see commit 29b5e5ef8739 ("mptcp: implement TCP_NOTSENT_LOWAT support") ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman --- net/mptcp/sockopt.c | 61 +++++++++++++++++++-------------------------- 1 file changed, 26 insertions(+), 35 deletions(-) diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c index c3967486ce69..7573bbd15f84 100644 --- a/net/mptcp/sockopt.c +++ b/net/mptcp/sockopt.c @@ -616,18 +616,11 @@ static int mptcp_setsockopt_sol_tcp_congestion(struct mptcp_sock *msk, sockptr_t return ret; } -static int mptcp_setsockopt_sol_tcp_cork(struct mptcp_sock *msk, sockptr_t optval, - unsigned int optlen) +static int __mptcp_setsockopt_sol_tcp_cork(struct mptcp_sock *msk, int val) { struct mptcp_subflow_context *subflow; struct sock *sk = (struct sock *)msk; - int val, ret; - ret = mptcp_get_int_option(msk, optval, optlen, &val); - if (ret) - return ret; - - lock_sock(sk); sockopt_seq_inc(msk); msk->cork = !!val; mptcp_for_each_subflow(msk, subflow) { @@ -639,23 +632,15 @@ static int mptcp_setsockopt_sol_tcp_cork(struct mptcp_sock *msk, sockptr_t optva } if (!val) mptcp_check_and_set_pending(sk); - release_sock(sk); return 0; } -static int mptcp_setsockopt_sol_tcp_nodelay(struct mptcp_sock *msk, sockptr_t optval, - unsigned int optlen) +static int __mptcp_setsockopt_sol_tcp_nodelay(struct mptcp_sock *msk, int val) { struct mptcp_subflow_context *subflow; struct sock *sk = (struct sock *)msk; - int val, ret; - ret = mptcp_get_int_option(msk, optval, optlen, &val); - if (ret) - return ret; - - lock_sock(sk); sockopt_seq_inc(msk); msk->nodelay = !!val; mptcp_for_each_subflow(msk, subflow) { @@ -667,8 +652,6 @@ static int mptcp_setsockopt_sol_tcp_nodelay(struct mptcp_sock *msk, sockptr_t op } if (val) mptcp_check_and_set_pending(sk); - release_sock(sk); - return 0; } @@ -793,25 +776,10 @@ static int mptcp_setsockopt_sol_tcp(struct mptcp_sock *msk, int optname, int ret, val; switch (optname) { - case TCP_INQ: - ret = mptcp_get_int_option(msk, optval, optlen, &val); - if (ret) - return ret; - if (val < 0 || val > 1) - return -EINVAL; - - lock_sock(sk); - msk->recvmsg_inq = !!val; - release_sock(sk); - return 0; case TCP_ULP: return -EOPNOTSUPP; case TCP_CONGESTION: return mptcp_setsockopt_sol_tcp_congestion(msk, optval, optlen); - case TCP_CORK: - return mptcp_setsockopt_sol_tcp_cork(msk, optval, optlen); - case TCP_NODELAY: - return mptcp_setsockopt_sol_tcp_nodelay(msk, optval, optlen); case TCP_DEFER_ACCEPT: return mptcp_setsockopt_sol_tcp_defer(msk, optval, optlen); case TCP_FASTOPEN_CONNECT: @@ -819,7 +787,30 @@ static int mptcp_setsockopt_sol_tcp(struct mptcp_sock *msk, int optname, optval, optlen); } - return -EOPNOTSUPP; + ret = mptcp_get_int_option(msk, optval, optlen, &val); + if (ret) + return ret; + + lock_sock(sk); + switch (optname) { + case TCP_INQ: + if (val < 0 || val > 1) + ret = -EINVAL; + else + msk->recvmsg_inq = !!val; + break; + case TCP_CORK: + ret = __mptcp_setsockopt_sol_tcp_cork(msk, val); + break; + case TCP_NODELAY: + ret = __mptcp_setsockopt_sol_tcp_nodelay(msk, val); + break; + default: + ret = -ENOPROTOOPT; + } + + release_sock(sk); + return ret; } int mptcp_setsockopt(struct sock *sk, int level, int optname, From 7a898d5ed4a0b8f5ddc2512bd62164eaf885ab94 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Wed, 29 May 2024 12:00:26 +0200 Subject: [PATCH 13/87] mptcp: fix full TCP keep-alive support commit bd11dc4fb969ec148e50cd87f88a78246dbc4d0b upstream. SO_KEEPALIVE support has been added a while ago, as part of a series "adding SOL_SOCKET" support. To have a full control of this keep-alive feature, it is important to also support TCP_KEEP* socket options at the SOL_TCP level. Supporting them on the setsockopt() part is easy, it is just a matter of remembering each value in the MPTCP sock structure, and calling tcp_sock_set_keep*() helpers on each subflow. If the value is not modified (0), calling these helpers will not do anything. For the getsockopt() part, the corresponding value from the MPTCP sock structure or the default one is simply returned. All of this is very similar to other TCP_* socket options supported by MPTCP. It looks important for kernels supporting SO_KEEPALIVE, to also support TCP_KEEP* options as well: some apps seem to (wrongly) consider that if the former is supported, the latter ones will be supported as well. But also, not having this simple and isolated change is preventing MPTCP support in some apps, and libraries like GoLang [1]. This is why this patch is seen as a fix. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/383 Fixes: 1b3e7ede1365 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Link: https://github.com/golang/go/issues/56539 [1] Acked-by: Paolo Abeni Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Mat Martineau Link: https://lore.kernel.org/r/20240514011335.176158-3-martineau@kernel.org Signed-off-by: Jakub Kicinski [ Conflicts in the same context, because commit 29b5e5ef8739 ("mptcp: implement TCP_NOTSENT_LOWAT support") (new feature) and commit 013e3179dbd2 ("mptcp: fix rcv space initialization") (not backported because of the various conflicts, and because the race fixed by this commit "does not produce ill effects in practice") are not in this version. Also, TCP_KEEPINTVL and TCP_KEEPCNT value had to be set without lock, the same way it was done on TCP side prior commit 6fd70a6b4e6f ("tcp: set TCP_KEEPINTVL locklessly") and commit 84485080cbc1 ("tcp: set TCP_KEEPCNT locklessly"). ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman --- net/mptcp/protocol.h | 3 ++ net/mptcp/sockopt.c | 79 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 82 insertions(+) diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index 2bc37773e780..eaed858c0ff9 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -288,6 +288,9 @@ struct mptcp_sock { fastopening:1, in_accept_queue:1, free_first:1; + int keepalive_cnt; + int keepalive_idle; + int keepalive_intvl; struct work_struct work; struct sk_buff *ooo_last_skb; struct rb_root out_of_order_queue; diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c index 7573bbd15f84..ff82fc062ae7 100644 --- a/net/mptcp/sockopt.c +++ b/net/mptcp/sockopt.c @@ -616,6 +616,52 @@ static int mptcp_setsockopt_sol_tcp_congestion(struct mptcp_sock *msk, sockptr_t return ret; } +static int __tcp_sock_set_keepintvl(struct sock *sk, int val) +{ + if (val < 1 || val > MAX_TCP_KEEPINTVL) + return -EINVAL; + + WRITE_ONCE(tcp_sk(sk)->keepalive_intvl, val * HZ); + + return 0; +} + +static int __tcp_sock_set_keepcnt(struct sock *sk, int val) +{ + if (val < 1 || val > MAX_TCP_KEEPCNT) + return -EINVAL; + + /* Paired with READ_ONCE() in keepalive_probes() */ + WRITE_ONCE(tcp_sk(sk)->keepalive_probes, val); + + return 0; +} + +static int __mptcp_setsockopt_set_val(struct mptcp_sock *msk, int max, + int (*set_val)(struct sock *, int), + int *msk_val, int val) +{ + struct mptcp_subflow_context *subflow; + int err = 0; + + mptcp_for_each_subflow(msk, subflow) { + struct sock *ssk = mptcp_subflow_tcp_sock(subflow); + int ret; + + lock_sock(ssk); + ret = set_val(ssk, val); + err = err ? : ret; + release_sock(ssk); + } + + if (!err) { + *msk_val = val; + sockopt_seq_inc(msk); + } + + return err; +} + static int __mptcp_setsockopt_sol_tcp_cork(struct mptcp_sock *msk, int val) { struct mptcp_subflow_context *subflow; @@ -805,6 +851,22 @@ static int mptcp_setsockopt_sol_tcp(struct mptcp_sock *msk, int optname, case TCP_NODELAY: ret = __mptcp_setsockopt_sol_tcp_nodelay(msk, val); break; + case TCP_KEEPIDLE: + ret = __mptcp_setsockopt_set_val(msk, MAX_TCP_KEEPIDLE, + &tcp_sock_set_keepidle_locked, + &msk->keepalive_idle, val); + break; + case TCP_KEEPINTVL: + ret = __mptcp_setsockopt_set_val(msk, MAX_TCP_KEEPINTVL, + &__tcp_sock_set_keepintvl, + &msk->keepalive_intvl, val); + break; + case TCP_KEEPCNT: + ret = __mptcp_setsockopt_set_val(msk, MAX_TCP_KEEPCNT, + &__tcp_sock_set_keepcnt, + &msk->keepalive_cnt, + val); + break; default: ret = -ENOPROTOOPT; } @@ -1163,6 +1225,8 @@ static int mptcp_put_int_option(struct mptcp_sock *msk, char __user *optval, static int mptcp_getsockopt_sol_tcp(struct mptcp_sock *msk, int optname, char __user *optval, int __user *optlen) { + struct sock *sk = (void *)msk; + switch (optname) { case TCP_ULP: case TCP_CONGESTION: @@ -1178,6 +1242,18 @@ static int mptcp_getsockopt_sol_tcp(struct mptcp_sock *msk, int optname, return mptcp_put_int_option(msk, optval, optlen, msk->cork); case TCP_NODELAY: return mptcp_put_int_option(msk, optval, optlen, msk->nodelay); + case TCP_KEEPIDLE: + return mptcp_put_int_option(msk, optval, optlen, + msk->keepalive_idle ? : + READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_keepalive_time) / HZ); + case TCP_KEEPINTVL: + return mptcp_put_int_option(msk, optval, optlen, + msk->keepalive_intvl ? : + READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_keepalive_intvl) / HZ); + case TCP_KEEPCNT: + return mptcp_put_int_option(msk, optval, optlen, + msk->keepalive_cnt ? : + READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_keepalive_probes)); } return -EOPNOTSUPP; } @@ -1282,6 +1358,9 @@ static void sync_socket_options(struct mptcp_sock *msk, struct sock *ssk) tcp_set_congestion_control(ssk, msk->ca_name, false, true); __tcp_sock_set_cork(ssk, !!msk->cork); __tcp_sock_set_nodelay(ssk, !!msk->nodelay); + tcp_sock_set_keepidle_locked(ssk, msk->keepalive_idle); + __tcp_sock_set_keepintvl(ssk, msk->keepalive_intvl); + __tcp_sock_set_keepcnt(ssk, msk->keepalive_cnt); inet_sk(ssk)->transparent = inet_sk(sk)->transparent; inet_sk(ssk)->freebind = inet_sk(sk)->freebind; From 6bbd9c021c6eab740da4aa9f84d59fceef524859 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 3 Jun 2024 10:59:26 +0200 Subject: [PATCH 14/87] vxlan: Fix regression when dropping packets due to invalid src addresses commit 1cd4bc987abb2823836cbb8f887026011ccddc8a upstream. Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann Cc: David Bauer Cc: Ido Schimmel Cc: Nikolay Aleksandrov Cc: Martin KaFai Lau Reviewed-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Reviewed-by: David Bauer Signed-off-by: David S. Miller [ Backport note: vxlan snooping/learning not supported in 6.8 or older, so commit is simply a revert. ] Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman --- drivers/net/vxlan/vxlan_core.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index 01ce289f4abf..a7ae68f490c4 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -1662,10 +1662,6 @@ static bool vxlan_set_mac(struct vxlan_dev *vxlan, if (ether_addr_equal(eth_hdr(skb)->h_source, vxlan->dev->dev_addr)) return false; - /* Ignore packets from invalid src-address */ - if (!is_valid_ether_addr(eth_hdr(skb)->h_source)) - return false; - /* Get address from the outer IP header */ if (vxlan_get_sk_family(vs) == AF_INET) { saddr.sin.sin_addr.s_addr = ip_hdr(skb)->saddr; From 376fad5e5210b6ea366113ba26f429bfeb8a93e2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 7 Jun 2023 15:13:35 -0700 Subject: [PATCH 15/87] scripts/gdb: fix SB_* constants parsing commit 6a59cb5158bff13b80f116305155fbe4967a5010 upstream. --0000000000009a0c9905fd9173ad Content-Transfer-Encoding: 8bit After f15afbd34d8f ("fs: fix undefined behavior in bit shift for SB_NOUSER") the constants were changed from plain integers which LX_VALUE() can parse to constants using the BIT() macro which causes the following: Reading symbols from build/linux-custom/vmlinux...done. Traceback (most recent call last): File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in import linux.constants File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/constants.py", line 5 LX_SB_RDONLY = ((((1UL))) << (0)) Use LX_GDBPARSED() which does not suffer from that issue. f15afbd34d8f ("fs: fix undefined behavior in bit shift for SB_NOUSER") Link: https://lkml.kernel.org/r/20230607221337.2781730-1-florian.fainelli@broadcom.com Signed-off-by: Florian Fainelli Acked-by: Christian Brauner Cc: Hao Ge Cc: Jan Kiszka Cc: Kieran Bingham Cc: Luis Chamberlain Cc: Pankaj Raghav Signed-off-by: Andrew Morton Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman --- scripts/gdb/linux/constants.py.in | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/scripts/gdb/linux/constants.py.in b/scripts/gdb/linux/constants.py.in index 08f0587d15ea..0ff707bc1896 100644 --- a/scripts/gdb/linux/constants.py.in +++ b/scripts/gdb/linux/constants.py.in @@ -46,12 +46,12 @@ if IS_BUILTIN(CONFIG_COMMON_CLK): LX_GDBPARSED(CLK_GET_RATE_NOCACHE) /* linux/fs.h */ -LX_VALUE(SB_RDONLY) -LX_VALUE(SB_SYNCHRONOUS) -LX_VALUE(SB_MANDLOCK) -LX_VALUE(SB_DIRSYNC) -LX_VALUE(SB_NOATIME) -LX_VALUE(SB_NODIRATIME) +LX_GDBPARSED(SB_RDONLY) +LX_GDBPARSED(SB_SYNCHRONOUS) +LX_GDBPARSED(SB_MANDLOCK) +LX_GDBPARSED(SB_DIRSYNC) +LX_GDBPARSED(SB_NOATIME) +LX_GDBPARSED(SB_NODIRATIME) /* linux/htimer.h */ LX_GDBPARSED(hrtimer_resolution) From 8c8aa473fe6eb46a4bf99f3ea2dbe52bf0c1a1f0 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Thu, 25 Apr 2024 16:58:38 +0800 Subject: [PATCH 16/87] f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode() commit 20faaf30e55522bba2b56d9c46689233205d7717 upstream. syzbot reports a kernel bug as below: F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4 ================================================================== BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076 CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] current_nat_addr fs/f2fs/node.h:213 [inline] f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline] f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838 __do_sys_ioctl fs/ioctl.c:902 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is we missed to do sanity check on i_xattr_nid during f2fs_iget(), so that in fiemap() path, current_nat_addr() will access nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering kasan bug report, fix it. Reported-and-tested-by: syzbot+3694e283cf5c40df6d14@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/00000000000094036c0616e72a1d@google.com Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman --- fs/f2fs/inode.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index 869bb6ec107c..35b1c672644e 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -298,6 +298,12 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page) } } + if (fi->i_xattr_nid && f2fs_check_nid_range(sbi, fi->i_xattr_nid)) { + f2fs_warn(sbi, "%s: inode (ino=%lx) has corrupted i_xattr_nid: %u, run fsck to fix.", + __func__, inode->i_ino, fi->i_xattr_nid); + return false; + } + return true; } From d082757b8359201c3864323cea4b91ea30a1e676 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Tue, 5 Apr 2022 10:50:18 +0100 Subject: [PATCH 17/87] media: lgdt3306a: Add a check against null-pointer-def commit c1115ddbda9c930fba0fdd062e7a8873ebaf898d upstream. The driver should check whether the client provides the platform_data. The following log reveals it: [ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40 [ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414 [ 29.612820] Call Trace: [ 29.613030] [ 29.613201] dump_stack_lvl+0x56/0x6f [ 29.613496] ? kmemdup+0x30/0x40 [ 29.613754] print_report.cold+0x494/0x6b7 [ 29.614082] ? kmemdup+0x30/0x40 [ 29.614340] kasan_report+0x8a/0x190 [ 29.614628] ? kmemdup+0x30/0x40 [ 29.614888] kasan_check_range+0x14d/0x1d0 [ 29.615213] memcpy+0x20/0x60 [ 29.615454] kmemdup+0x30/0x40 [ 29.615700] lgdt3306a_probe+0x52/0x310 [ 29.616339] i2c_device_probe+0x951/0xa90 Link: https://lore.kernel.org/linux-media/20220405095018.3993578-1-zheyuma97@gmail.com Signed-off-by: Zheyu Ma Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/dvb-frontends/lgdt3306a.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb-frontends/lgdt3306a.c b/drivers/media/dvb-frontends/lgdt3306a.c index 6dfa8b18ed67..fccadfcd76be 100644 --- a/drivers/media/dvb-frontends/lgdt3306a.c +++ b/drivers/media/dvb-frontends/lgdt3306a.c @@ -2177,6 +2177,11 @@ static int lgdt3306a_probe(struct i2c_client *client, struct dvb_frontend *fe; int ret; + if (!client->dev.platform_data) { + dev_err(&client->dev, "platform data is mandatory\n"); + return -EINVAL; + } + config = kmemdup(client->dev.platform_data, sizeof(struct lgdt3306a_config), GFP_KERNEL); if (config == NULL) { From 011552f29f20842c9a7a21bffe1f6a2d6457ba46 Mon Sep 17 00:00:00 2001 From: Bob Zhou Date: Tue, 23 Apr 2024 16:58:11 +0800 Subject: [PATCH 18/87] drm/amdgpu: add error handle to avoid out-of-bounds MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 8b2faf1a4f3b6c748c0da36cda865a226534d520 upstream. if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should be stop to avoid out-of-bounds read, so directly return -EINVAL. Signed-off-by: Bob Zhou Acked-by: Christian König Reviewed-by: Le Ma Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index 97b033dfe9e4..68cdb6682776 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -2049,6 +2049,9 @@ static int sdma_v4_0_process_trap_irq(struct amdgpu_device *adev, DRM_DEBUG("IH: SDMA trap\n"); instance = sdma_v4_0_irq_id_to_seq(entry->client_id); + if (instance < 0) + return instance; + switch (entry->ring_id) { case 0: amdgpu_fence_process(&adev->sdma.instance[instance].ring); From 934e1e4331859183a861f396d7dfaf33cb5afb02 Mon Sep 17 00:00:00 2001 From: Matthew Mirvish Date: Thu, 9 May 2024 09:11:17 +0800 Subject: [PATCH 19/87] bcache: fix variable length array abuse in btree_iter commit 3a861560ccb35f2a4f0a4b8207fa7c2a35fc7f31 upstream. btree_iter is used in two ways: either allocated on the stack with a fixed size MAX_BSETS, or from a mempool with a dynamic size based on the specific cache set. Previously, the struct had a fixed-length array of size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized iterators, which causes UBSAN to complain. This patch uses the same approach as in bcachefs's sort_iter and splits the iterator into a btree_iter with a flexible array member and a btree_iter_stack which embeds a btree_iter as well as a fixed-length data array. Cc: stable@vger.kernel.org Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368 Signed-off-by: Matthew Mirvish Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/md/bcache/bset.c | 44 +++++++++++++++++------------------ drivers/md/bcache/bset.h | 28 ++++++++++++++-------- drivers/md/bcache/btree.c | 40 ++++++++++++++++--------------- drivers/md/bcache/super.c | 5 ++-- drivers/md/bcache/sysfs.c | 2 +- drivers/md/bcache/writeback.c | 10 ++++---- 6 files changed, 70 insertions(+), 59 deletions(-) diff --git a/drivers/md/bcache/bset.c b/drivers/md/bcache/bset.c index 2bba4d6aaaa2..463eb13bd0b2 100644 --- a/drivers/md/bcache/bset.c +++ b/drivers/md/bcache/bset.c @@ -54,7 +54,7 @@ void bch_dump_bucket(struct btree_keys *b) int __bch_count_data(struct btree_keys *b) { unsigned int ret = 0; - struct btree_iter iter; + struct btree_iter_stack iter; struct bkey *k; if (b->ops->is_extents) @@ -67,7 +67,7 @@ void __bch_check_keys(struct btree_keys *b, const char *fmt, ...) { va_list args; struct bkey *k, *p = NULL; - struct btree_iter iter; + struct btree_iter_stack iter; const char *err; for_each_key(b, k, &iter) { @@ -879,7 +879,7 @@ unsigned int bch_btree_insert_key(struct btree_keys *b, struct bkey *k, unsigned int status = BTREE_INSERT_STATUS_NO_INSERT; struct bset *i = bset_tree_last(b)->data; struct bkey *m, *prev = NULL; - struct btree_iter iter; + struct btree_iter_stack iter; struct bkey preceding_key_on_stack = ZERO_KEY; struct bkey *preceding_key_p = &preceding_key_on_stack; @@ -895,9 +895,9 @@ unsigned int bch_btree_insert_key(struct btree_keys *b, struct bkey *k, else preceding_key(k, &preceding_key_p); - m = bch_btree_iter_init(b, &iter, preceding_key_p); + m = bch_btree_iter_stack_init(b, &iter, preceding_key_p); - if (b->ops->insert_fixup(b, k, &iter, replace_key)) + if (b->ops->insert_fixup(b, k, &iter.iter, replace_key)) return status; status = BTREE_INSERT_STATUS_INSERT; @@ -1100,33 +1100,33 @@ void bch_btree_iter_push(struct btree_iter *iter, struct bkey *k, btree_iter_cmp)); } -static struct bkey *__bch_btree_iter_init(struct btree_keys *b, - struct btree_iter *iter, - struct bkey *search, - struct bset_tree *start) +static struct bkey *__bch_btree_iter_stack_init(struct btree_keys *b, + struct btree_iter_stack *iter, + struct bkey *search, + struct bset_tree *start) { struct bkey *ret = NULL; - iter->size = ARRAY_SIZE(iter->data); - iter->used = 0; + iter->iter.size = ARRAY_SIZE(iter->stack_data); + iter->iter.used = 0; #ifdef CONFIG_BCACHE_DEBUG - iter->b = b; + iter->iter.b = b; #endif for (; start <= bset_tree_last(b); start++) { ret = bch_bset_search(b, start, search); - bch_btree_iter_push(iter, ret, bset_bkey_last(start->data)); + bch_btree_iter_push(&iter->iter, ret, bset_bkey_last(start->data)); } return ret; } -struct bkey *bch_btree_iter_init(struct btree_keys *b, - struct btree_iter *iter, +struct bkey *bch_btree_iter_stack_init(struct btree_keys *b, + struct btree_iter_stack *iter, struct bkey *search) { - return __bch_btree_iter_init(b, iter, search, b->set); + return __bch_btree_iter_stack_init(b, iter, search, b->set); } static inline struct bkey *__bch_btree_iter_next(struct btree_iter *iter, @@ -1293,10 +1293,10 @@ void bch_btree_sort_partial(struct btree_keys *b, unsigned int start, struct bset_sort_state *state) { size_t order = b->page_order, keys = 0; - struct btree_iter iter; + struct btree_iter_stack iter; int oldsize = bch_count_data(b); - __bch_btree_iter_init(b, &iter, NULL, &b->set[start]); + __bch_btree_iter_stack_init(b, &iter, NULL, &b->set[start]); if (start) { unsigned int i; @@ -1307,7 +1307,7 @@ void bch_btree_sort_partial(struct btree_keys *b, unsigned int start, order = get_order(__set_bytes(b->set->data, keys)); } - __btree_sort(b, &iter, start, order, false, state); + __btree_sort(b, &iter.iter, start, order, false, state); EBUG_ON(oldsize >= 0 && bch_count_data(b) != oldsize); } @@ -1323,11 +1323,11 @@ void bch_btree_sort_into(struct btree_keys *b, struct btree_keys *new, struct bset_sort_state *state) { uint64_t start_time = local_clock(); - struct btree_iter iter; + struct btree_iter_stack iter; - bch_btree_iter_init(b, &iter, NULL); + bch_btree_iter_stack_init(b, &iter, NULL); - btree_mergesort(b, new->set->data, &iter, false, true); + btree_mergesort(b, new->set->data, &iter.iter, false, true); bch_time_stats_update(&state->time, start_time); diff --git a/drivers/md/bcache/bset.h b/drivers/md/bcache/bset.h index d795c84246b0..011f6062c4c0 100644 --- a/drivers/md/bcache/bset.h +++ b/drivers/md/bcache/bset.h @@ -321,7 +321,14 @@ struct btree_iter { #endif struct btree_iter_set { struct bkey *k, *end; - } data[MAX_BSETS]; + } data[]; +}; + +/* Fixed-size btree_iter that can be allocated on the stack */ + +struct btree_iter_stack { + struct btree_iter iter; + struct btree_iter_set stack_data[MAX_BSETS]; }; typedef bool (*ptr_filter_fn)(struct btree_keys *b, const struct bkey *k); @@ -333,9 +340,9 @@ struct bkey *bch_btree_iter_next_filter(struct btree_iter *iter, void bch_btree_iter_push(struct btree_iter *iter, struct bkey *k, struct bkey *end); -struct bkey *bch_btree_iter_init(struct btree_keys *b, - struct btree_iter *iter, - struct bkey *search); +struct bkey *bch_btree_iter_stack_init(struct btree_keys *b, + struct btree_iter_stack *iter, + struct bkey *search); struct bkey *__bch_bset_search(struct btree_keys *b, struct bset_tree *t, const struct bkey *search); @@ -350,13 +357,14 @@ static inline struct bkey *bch_bset_search(struct btree_keys *b, return search ? __bch_bset_search(b, t, search) : t->data->start; } -#define for_each_key_filter(b, k, iter, filter) \ - for (bch_btree_iter_init((b), (iter), NULL); \ - ((k) = bch_btree_iter_next_filter((iter), (b), filter));) +#define for_each_key_filter(b, k, stack_iter, filter) \ + for (bch_btree_iter_stack_init((b), (stack_iter), NULL); \ + ((k) = bch_btree_iter_next_filter(&((stack_iter)->iter), (b), \ + filter));) -#define for_each_key(b, k, iter) \ - for (bch_btree_iter_init((b), (iter), NULL); \ - ((k) = bch_btree_iter_next(iter));) +#define for_each_key(b, k, stack_iter) \ + for (bch_btree_iter_stack_init((b), (stack_iter), NULL); \ + ((k) = bch_btree_iter_next(&((stack_iter)->iter)));) /* Sorting */ diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index 6a2f57ae0f3c..d680c810e5e1 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -1283,7 +1283,7 @@ static bool btree_gc_mark_node(struct btree *b, struct gc_stat *gc) uint8_t stale = 0; unsigned int keys = 0, good_keys = 0; struct bkey *k; - struct btree_iter iter; + struct btree_iter_stack iter; struct bset_tree *t; gc->nodes++; @@ -1544,7 +1544,7 @@ static int btree_gc_rewrite_node(struct btree *b, struct btree_op *op, static unsigned int btree_gc_count_keys(struct btree *b) { struct bkey *k; - struct btree_iter iter; + struct btree_iter_stack iter; unsigned int ret = 0; for_each_key_filter(&b->keys, k, &iter, bch_ptr_bad) @@ -1585,17 +1585,18 @@ static int btree_gc_recurse(struct btree *b, struct btree_op *op, int ret = 0; bool should_rewrite; struct bkey *k; - struct btree_iter iter; + struct btree_iter_stack iter; struct gc_merge_info r[GC_MERGE_NODES]; struct gc_merge_info *i, *last = r + ARRAY_SIZE(r) - 1; - bch_btree_iter_init(&b->keys, &iter, &b->c->gc_done); + bch_btree_iter_stack_init(&b->keys, &iter, &b->c->gc_done); for (i = r; i < r + ARRAY_SIZE(r); i++) i->b = ERR_PTR(-EINTR); while (1) { - k = bch_btree_iter_next_filter(&iter, &b->keys, bch_ptr_bad); + k = bch_btree_iter_next_filter(&iter.iter, &b->keys, + bch_ptr_bad); if (k) { r->b = bch_btree_node_get(b->c, op, k, b->level - 1, true, b); @@ -1885,7 +1886,7 @@ static int bch_btree_check_recurse(struct btree *b, struct btree_op *op) { int ret = 0; struct bkey *k, *p = NULL; - struct btree_iter iter; + struct btree_iter_stack iter; for_each_key_filter(&b->keys, k, &iter, bch_ptr_invalid) bch_initial_mark_key(b->c, b->level, k); @@ -1893,10 +1894,10 @@ static int bch_btree_check_recurse(struct btree *b, struct btree_op *op) bch_initial_mark_key(b->c, b->level + 1, &b->key); if (b->level) { - bch_btree_iter_init(&b->keys, &iter, NULL); + bch_btree_iter_stack_init(&b->keys, &iter, NULL); do { - k = bch_btree_iter_next_filter(&iter, &b->keys, + k = bch_btree_iter_next_filter(&iter.iter, &b->keys, bch_ptr_bad); if (k) { btree_node_prefetch(b, k); @@ -1924,7 +1925,7 @@ static int bch_btree_check_thread(void *arg) struct btree_check_info *info = arg; struct btree_check_state *check_state = info->state; struct cache_set *c = check_state->c; - struct btree_iter iter; + struct btree_iter_stack iter; struct bkey *k, *p; int cur_idx, prev_idx, skip_nr; @@ -1933,8 +1934,8 @@ static int bch_btree_check_thread(void *arg) ret = 0; /* root node keys are checked before thread created */ - bch_btree_iter_init(&c->root->keys, &iter, NULL); - k = bch_btree_iter_next_filter(&iter, &c->root->keys, bch_ptr_bad); + bch_btree_iter_stack_init(&c->root->keys, &iter, NULL); + k = bch_btree_iter_next_filter(&iter.iter, &c->root->keys, bch_ptr_bad); BUG_ON(!k); p = k; @@ -1952,7 +1953,7 @@ static int bch_btree_check_thread(void *arg) skip_nr = cur_idx - prev_idx; while (skip_nr) { - k = bch_btree_iter_next_filter(&iter, + k = bch_btree_iter_next_filter(&iter.iter, &c->root->keys, bch_ptr_bad); if (k) @@ -2025,7 +2026,7 @@ int bch_btree_check(struct cache_set *c) int ret = 0; int i; struct bkey *k = NULL; - struct btree_iter iter; + struct btree_iter_stack iter; struct btree_check_state check_state; /* check and mark root node keys */ @@ -2521,11 +2522,11 @@ static int bch_btree_map_nodes_recurse(struct btree *b, struct btree_op *op, if (b->level) { struct bkey *k; - struct btree_iter iter; + struct btree_iter_stack iter; - bch_btree_iter_init(&b->keys, &iter, from); + bch_btree_iter_stack_init(&b->keys, &iter, from); - while ((k = bch_btree_iter_next_filter(&iter, &b->keys, + while ((k = bch_btree_iter_next_filter(&iter.iter, &b->keys, bch_ptr_bad))) { ret = bcache_btree(map_nodes_recurse, k, b, op, from, fn, flags); @@ -2554,11 +2555,12 @@ int bch_btree_map_keys_recurse(struct btree *b, struct btree_op *op, { int ret = MAP_CONTINUE; struct bkey *k; - struct btree_iter iter; + struct btree_iter_stack iter; - bch_btree_iter_init(&b->keys, &iter, from); + bch_btree_iter_stack_init(&b->keys, &iter, from); - while ((k = bch_btree_iter_next_filter(&iter, &b->keys, bch_ptr_bad))) { + while ((k = bch_btree_iter_next_filter(&iter.iter, &b->keys, + bch_ptr_bad))) { ret = !b->level ? fn(op, b, k) : bcache_btree(map_keys_recurse, k, diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 70e5bd8961d2..659f6777b973 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -1915,8 +1915,9 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) INIT_LIST_HEAD(&c->btree_cache_freed); INIT_LIST_HEAD(&c->data_buckets); - iter_size = ((meta_bucket_pages(sb) * PAGE_SECTORS) / sb->block_size + 1) * - sizeof(struct btree_iter_set); + iter_size = sizeof(struct btree_iter) + + ((meta_bucket_pages(sb) * PAGE_SECTORS) / sb->block_size) * + sizeof(struct btree_iter_set); c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL); if (!c->devices) diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c index 025fe6479bb6..15749ba958c8 100644 --- a/drivers/md/bcache/sysfs.c +++ b/drivers/md/bcache/sysfs.c @@ -660,7 +660,7 @@ static unsigned int bch_root_usage(struct cache_set *c) unsigned int bytes = 0; struct bkey *k; struct btree *b; - struct btree_iter iter; + struct btree_iter_stack iter; goto lock_root; diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 18c6e0d2877b..6081dc6fd013 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -908,15 +908,15 @@ static int bch_dirty_init_thread(void *arg) struct dirty_init_thrd_info *info = arg; struct bch_dirty_init_state *state = info->state; struct cache_set *c = state->c; - struct btree_iter iter; + struct btree_iter_stack iter; struct bkey *k, *p; int cur_idx, prev_idx, skip_nr; k = p = NULL; prev_idx = 0; - bch_btree_iter_init(&c->root->keys, &iter, NULL); - k = bch_btree_iter_next_filter(&iter, &c->root->keys, bch_ptr_bad); + bch_btree_iter_stack_init(&c->root->keys, &iter, NULL); + k = bch_btree_iter_next_filter(&iter.iter, &c->root->keys, bch_ptr_bad); BUG_ON(!k); p = k; @@ -930,7 +930,7 @@ static int bch_dirty_init_thread(void *arg) skip_nr = cur_idx - prev_idx; while (skip_nr) { - k = bch_btree_iter_next_filter(&iter, + k = bch_btree_iter_next_filter(&iter.iter, &c->root->keys, bch_ptr_bad); if (k) @@ -979,7 +979,7 @@ void bch_sectors_dirty_init(struct bcache_device *d) int i; struct btree *b = NULL; struct bkey *k = NULL; - struct btree_iter iter; + struct btree_iter_stack iter; struct sectors_dirty_init op; struct cache_set *c = d->c; struct bch_dirty_init_state state; From 336b8b2e90e6c042d4813d21729bd09413c14206 Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Tue, 30 Apr 2024 10:05:15 +0800 Subject: [PATCH 20/87] wifi: rtw89: correct aSIFSTime for 6GHz band commit f506e3ee547669cd96842e03c8a772aa7df721fa upstream. aSIFSTime is 10us for 2GHz band and 16us for 5GHz and 6GHz bands. Originally, it doesn't consider 6GHz band and use wrong value, so correct it accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih Link: https://msgid.link/20240430020515.8399-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/realtek/rtw89/mac80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c index a8f478f0cde9..3a108b13aa59 100644 --- a/drivers/net/wireless/realtek/rtw89/mac80211.c +++ b/drivers/net/wireless/realtek/rtw89/mac80211.c @@ -263,7 +263,7 @@ static u8 rtw89_aifsn_to_aifs(struct rtw89_dev *rtwdev, u8 sifs; slot_time = vif->bss_conf.use_short_slot ? 9 : 20; - sifs = chan->band_type == RTW89_BAND_5G ? 16 : 10; + sifs = chan->band_type == RTW89_BAND_2G ? 10 : 16; return aifsn * slot_time + sifs; } From 5e0d41aa533ef4ceee39aef74c588b30d4e6229c Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sat, 4 May 2024 23:27:25 +0300 Subject: [PATCH 21/87] ata: pata_legacy: make legacy_exit() work again commit d4a89339f17c87c4990070e9116462d16e75894f upstream. Commit defc9cd826e4 ("pata_legacy: resychronize with upstream changes and resubmit") missed to update legacy_exit(), so that it now fails to do any cleanup -- the loop body there can never be entered. Fix that and finally remove now useless nr_legacy_host variable... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Fixes: defc9cd826e4 ("pata_legacy: resychronize with upstream changes and resubmit") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman --- drivers/ata/pata_legacy.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 03c580625c2c..55b462ce99df 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -173,8 +173,6 @@ static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; static struct legacy_probe probe_list[NR_HOST]; static struct legacy_data legacy_data[NR_HOST]; static struct ata_host *legacy_host[NR_HOST]; -static int nr_legacy_host; - /** * legacy_probe_add - Add interface to probe list @@ -1276,9 +1274,11 @@ static __exit void legacy_exit(void) { int i; - for (i = 0; i < nr_legacy_host; i++) { + for (i = 0; i < NR_HOST; i++) { struct legacy_data *ld = &legacy_data[i]; - ata_host_detach(legacy_host[i]); + + if (legacy_host[i]) + ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); } } From 560d69c975072974c11434ca6953891e74c1a665 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sat, 9 Mar 2024 14:15:03 +0100 Subject: [PATCH 22/87] thermal/drivers/qcom/lmh: Check for SCM availability at probe commit d9d3490c48df572edefc0b64655259eefdcbb9be upstream. Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that. Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Cc: Reviewed-by: Dmitry Baryshkov Reviewed-by: Bjorn Andersson Signed-off-by: Konrad Dybcio Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20240308-topic-rb1_lmh-v2-2-bac3914b0fe3@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/thermal/qcom/lmh.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c index 4122a51e9874..97cf0dc3a6c3 100644 --- a/drivers/thermal/qcom/lmh.c +++ b/drivers/thermal/qcom/lmh.c @@ -95,6 +95,9 @@ static int lmh_probe(struct platform_device *pdev) unsigned int enable_alg; u32 node_id; + if (!qcom_scm_is_available()) + return -EPROBE_DEFER; + lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL); if (!lmh_data) return -ENOMEM; From 3988a2850b387b0417f98900ed98b407cdc156f8 Mon Sep 17 00:00:00 2001 From: Maulik Shah Date: Thu, 15 Feb 2024 10:55:44 +0530 Subject: [PATCH 23/87] soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request commit f592cc5794747b81e53b53dd6e80219ee25f0611 upstream. Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned addresses associated with it. These control voltage, enable state, mode, and in legacy targets, voltage headroom. The current in-flight request checking logic looks for exact address matches. Requests for different addresses of the same RPMh resource as thus not detected as in-flight. Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight request check for VRM requests by ignoring the address offset. This ensures that only one request is allowed to be in-flight for a given VRM resource. This is needed to avoid scenarios where request commands are carried out by RPMh hardware out-of-order leading to LDO regulator over-current protection triggering. Fixes: 658628e7ef78 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio Tested-by: Elliot Berman # sm8650-qrd Signed-off-by: Maulik Shah Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman --- drivers/soc/qcom/cmd-db.c | 32 +++++++++++++++++++++++++++++++- drivers/soc/qcom/rpmh-rsc.c | 3 ++- include/soc/qcom/cmd-db.h | 10 +++++++++- 3 files changed, 42 insertions(+), 3 deletions(-) diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c index 629a7188b576..2a7d089ec727 100644 --- a/drivers/soc/qcom/cmd-db.c +++ b/drivers/soc/qcom/cmd-db.c @@ -1,6 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. */ +/* + * Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +#include #include #include #include @@ -17,6 +21,8 @@ #define MAX_SLV_ID 8 #define SLAVE_ID_MASK 0x7 #define SLAVE_ID_SHIFT 16 +#define SLAVE_ID(addr) FIELD_GET(GENMASK(19, 16), addr) +#define VRM_ADDR(addr) FIELD_GET(GENMASK(19, 4), addr) /** * struct entry_header: header for each entry in cmddb @@ -220,6 +226,30 @@ const void *cmd_db_read_aux_data(const char *id, size_t *len) } EXPORT_SYMBOL(cmd_db_read_aux_data); +/** + * cmd_db_match_resource_addr() - Compare if both Resource addresses are same + * + * @addr1: Resource address to compare + * @addr2: Resource address to compare + * + * Return: true if two addresses refer to the same resource, false otherwise + */ +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) +{ + /* + * Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte + * aligned addresses associated with it. Ignore the offset to check + * for VRM requests. + */ + if (addr1 == addr2) + return true; + else if (SLAVE_ID(addr1) == CMD_DB_HW_VRM && VRM_ADDR(addr1) == VRM_ADDR(addr2)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(cmd_db_match_resource_addr); + /** * cmd_db_read_slave_id - Get the slave ID for a given resource address * diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c index 01c2f50cb97e..5e7bb6338707 100644 --- a/drivers/soc/qcom/rpmh-rsc.c +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. */ #define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME @@ -519,7 +520,7 @@ static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs, for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) { addr = read_tcs_cmd(drv, RSC_DRV_CMD_ADDR, i, j); for (k = 0; k < msg->num_cmds; k++) { - if (addr == msg->cmds[k].addr) + if (cmd_db_match_resource_addr(msg->cmds[k].addr, addr)) return -EBUSY; } } diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h index c8bb56e6852a..47a6cab75e63 100644 --- a/include/soc/qcom/cmd-db.h +++ b/include/soc/qcom/cmd-db.h @@ -1,5 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ #ifndef __QCOM_COMMAND_DB_H__ #define __QCOM_COMMAND_DB_H__ @@ -21,6 +24,8 @@ u32 cmd_db_read_addr(const char *resource_id); const void *cmd_db_read_aux_data(const char *resource_id, size_t *len); +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2); + enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id); int cmd_db_ready(void); @@ -31,6 +36,9 @@ static inline u32 cmd_db_read_addr(const char *resource_id) static inline const void *cmd_db_read_aux_data(const char *resource_id, size_t *len) { return ERR_PTR(-ENODEV); } +static inline bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) +{ return false; } + static inline enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id) { return -ENODEV; } From ef2f4d60c3556c28c029740a958fa5bf0ddcc728 Mon Sep 17 00:00:00 2001 From: Christoffer Sandberg Date: Mon, 22 Apr 2024 10:04:36 +0200 Subject: [PATCH 24/87] ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx commit c81bf14f9db68311c2e75428eea070d97d603975 upstream. Listed devices need the override for the keyboard to work. Signed-off-by: Christoffer Sandberg Signed-off-by: Werner Sembach Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/resource.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 1c5c1a269fbe..d34812db1b67 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -576,6 +576,18 @@ static const struct dmi_system_id lg_laptop[] = { DMI_MATCH(DMI_BOARD_NAME, "X577"), }, }, + { + /* TongFang GXxHRXx/TUXEDO InfinityBook Pro Gen9 AMD */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GXxHRXx"), + }, + }, + { + /* TongFang GMxHGxx/TUXEDO Stellaris Slim Gen1 AMD */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"), + }, + }, { } }; From 2eea8b448ed17c50b5acc6895d232caf6ab66f36 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 1 Apr 2024 16:08:54 +0200 Subject: [PATCH 25/87] arm64: tegra: Correct Tegra132 I2C alias commit 2633c58e1354d7de2c8e7be8bdb6f68a0a01bad7 upstream. There is no such device as "as3722@40", because its name is "pmic". Use phandles for aliases to fix relying on full node path. This corrects aliases for RTC devices and also fixes dtc W=1 warning: tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40) Fixes: 0f279ebdf3ce ("arm64: tegra: Add NVIDIA Tegra132 Norrin support") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 4 ++-- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index d461da0b8049..22cb4d5f0416 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -9,8 +9,8 @@ compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124"; aliases { - rtc0 = "/i2c@7000d000/as3722@40"; - rtc1 = "/rtc@7000e000"; + rtc0 = &as3722; + rtc1 = &tegra_rtc; serial0 = &uarta; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 3673f79adf1a..ca8960f0c4ab 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -579,7 +579,7 @@ status = "disabled"; }; - rtc@7000e000 { + tegra_rtc: rtc@7000e000 { compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; interrupts = ; From 3f09972198b9a96727793362c134f50e57ff40d2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 1 May 2024 09:52:01 +0200 Subject: [PATCH 26/87] arm64: dts: qcom: qcs404: fix bluetooth device address commit f5f390a77f18eaeb2c93211a1b7c5e66b5acd423 upstream. The 'local-bd-address' property is used to pass a unique Bluetooth device address from the boot firmware to the kernel and should otherwise be left unset so that the OS can prevent the controller from being used until a valid address has been provided through some other means (e.g. using btmgmt). Fixes: 60f77ae7d1c1 ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold Reviewed-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 1678ef0f8684..737a67e0a6ad 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -60,7 +60,7 @@ vddrf-supply = <&vreg_l1_1p3>; vddch0-supply = <&vdd_ch0_3p3>; - local-bd-address = [ 02 00 00 00 5a ad ]; + local-bd-address = [ 00 00 00 00 00 00 ]; max-speed = <3200000>; }; From 3f8d5e802d4cedd445f9a89be8c3fd2d0e99024b Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Fri, 22 Mar 2024 16:10:05 +0800 Subject: [PATCH 27/87] md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING commit 151f66bb618d1fd0eeb84acb61b4a9fa5d8bb0fa upstream. Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with small possibility, the root cause is exactly the same as commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"") However, Dan reported another hang after that, and junxiao investigated the problem and found out that this is caused by plugged bio can't issue from raid5d(). Current implementation in raid5d() has a weird dependence: 1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear MD_SB_CHANGE_PENDING; 2) raid5d() handles IO in a deadloop, until all IO are issued; 3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared; This behaviour is introduce before v2.6, and for consequence, if other context hold 'reconfig_mutex', and md_check_recovery() can't update super_block, then raid5d() will waste one cpu 100% by the deadloop, until 'reconfig_mutex' is released. Refer to the implementation from raid1 and raid10, fix this problem by skipping issue IO if MD_SB_CHANGE_PENDING is still set after md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex' is released. Meanwhile, the hang problem will be fixed as well. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Reported-and-tested-by: Dan Moulding Closes: https://lore.kernel.org/all/20240123005700.9302-1-dan@danm.net/ Investigated-by: Junxiao Bi Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20240322081005.1112401-1-yukuai1@huaweicloud.com Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman --- drivers/md/raid5.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 8cf2317857e0..ed99b449d8fd 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -36,7 +36,6 @@ */ #include -#include #include #include #include @@ -6797,6 +6796,9 @@ static void raid5d(struct md_thread *thread) int batch_size, released; unsigned int offset; + if (test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) + break; + released = release_stripe_list(conf, conf->temp_inactive_list); if (released) clear_bit(R5_DID_ALLOC, &conf->cache_state); @@ -6833,18 +6835,7 @@ static void raid5d(struct md_thread *thread) spin_unlock_irq(&conf->device_lock); md_check_recovery(mddev); spin_lock_irq(&conf->device_lock); - - /* - * Waiting on MD_SB_CHANGE_PENDING below may deadlock - * seeing md_check_recovery() is needed to clear - * the flag when using mdmon. - */ - continue; } - - wait_event_lock_irq(mddev->sb_wait, - !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags), - conf->device_lock); } pr_debug("%d stripes handled\n", handled); From c365394a41d9a8e01d07068a1d10c6daf6c00da9 Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Wed, 10 Apr 2024 09:13:16 +0800 Subject: [PATCH 28/87] wifi: rtw89: pci: correct TX resource checking for PCI DMA channel of firmware command commit c6330b129786e267b14129335a08fa7c331c308d upstream. The DMA channel of firmware command doesn't use TX WD (WiFi descriptor), so don't need to consider number of TX WD as factor of TX resource. Otherwise, during pause state (a transient state to switch to/from low power mode) firmware commands could be dropped and driver throws warnings suddenly: rtw89_8852ce 0000:04:00.0: no tx fwcmd resource rtw89_8852ce 0000:04:00.0: failed to send h2c The case we met is that driver sends RSSI strength of firmware command at RX path that could be running concurrently with switching low power mode. The missing of this firmware command doesn't affect user experiences, because the RSSI strength will be updated again after a while. The DMA descriptors of normal packets has three layers like: +-------+ | TX BD | (*n elements) +-------+ | | +-------+ +-> | TX WD | (*m elements) +-------+ | | +--------+ +-> | SKB | +--------+ And, firmware command queue (TXCH 12) is a special queue that has only two layers: +-------+ | TX BD | (*n elements) +-------+ | | +------------------+ +-> | firmware command | +------------------+ Fixes: 4a29213cd775 ("wifi: rtw89: pci: correct TX resource checking in low power mode") Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih Link: https://msgid.link/20240410011316.9906-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/realtek/rtw89/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c index 4a012962cd44..58b6f7d4cab8 100644 --- a/drivers/net/wireless/realtek/rtw89/pci.c +++ b/drivers/net/wireless/realtek/rtw89/pci.c @@ -948,7 +948,8 @@ u32 __rtw89_pci_check_and_reclaim_tx_resource_noio(struct rtw89_dev *rtwdev, spin_lock_bh(&rtwpci->trx_lock); cnt = rtw89_pci_get_avail_txbd_num(tx_ring); - cnt = min(cnt, wd_ring->curr_num); + if (txch != RTW89_TXCH_CH12) + cnt = min(cnt, wd_ring->curr_num); spin_unlock_bh(&rtwpci->trx_lock); return cnt; From 2c13c9f6ca170cf4c3d615d25193a31c5ba8536c Mon Sep 17 00:00:00 2001 From: Bitterblue Smith Date: Mon, 15 Apr 2024 23:59:05 +0300 Subject: [PATCH 29/87] wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AU commit 08b5d052d17a89bb8706b2888277d0b682dc1610 upstream. Don't subtract 1 from the power index. This was added in commit 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") for unknown reasons. The vendor drivers don't do this. Also correct the calculations of values written to REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver, these are used for TX power training. With these changes rtl8xxxu sets the TX power of RTL8192CU the same as the vendor driver. None of this appears to have any effect on my RTL8192CU device. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith Reviewed-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://msgid.link/6ae5945b-644e-45e4-a78f-4c7d9c987910@gmail.com Signed-off-by: Greg Kroah-Hartman --- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 25 ++++++++----------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index ccac47dd781d..9ccf8550a067 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -1389,13 +1389,13 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS]; u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS]; u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b; - u8 val8; + u8 val8, base; int group, i; group = rtl8xxxu_gen1_channel_to_group(channel); - cck[0] = priv->cck_tx_power_index_A[group] - 1; - cck[1] = priv->cck_tx_power_index_B[group] - 1; + cck[0] = priv->cck_tx_power_index_A[group]; + cck[1] = priv->cck_tx_power_index_B[group]; if (priv->hi_pa) { if (cck[0] > 0x20) @@ -1406,10 +1406,6 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) ofdm[0] = priv->ht40_1s_tx_power_index_A[group]; ofdm[1] = priv->ht40_1s_tx_power_index_B[group]; - if (ofdm[0]) - ofdm[0] -= 1; - if (ofdm[1]) - ofdm[1] -= 1; ofdmbase[0] = ofdm[0] + priv->ofdm_tx_power_index_diff[group].a; ofdmbase[1] = ofdm[1] + priv->ofdm_tx_power_index_diff[group].b; @@ -1498,20 +1494,19 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs_a + power_base->reg_0e1c); + val8 = u32_get_bits(mcs_a + power_base->reg_0e1c, 0xff000000); for (i = 0; i < 3; i++) { - if (i != 2) - val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0; - else - val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0; + base = i != 2 ? 8 : 6; + val8 = max_t(int, val8 - base, 0); rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8); } + rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs_b + power_base->reg_0868); + val8 = u32_get_bits(mcs_b + power_base->reg_0868, 0xff000000); for (i = 0; i < 3; i++) { - if (i != 2) - val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0; - else - val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0; + base = i != 2 ? 8 : 6; + val8 = max_t(int, val8 - base, 0); rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8); } } From 83daddb6014e4cd76bed877bce93d67ec80521f6 Mon Sep 17 00:00:00 2001 From: Bitterblue Smith Date: Thu, 25 Apr 2024 21:09:21 +0300 Subject: [PATCH 30/87] wifi: rtlwifi: rtl8192de: Fix 5 GHz TX power commit de4d4be4fa64ed7b4aa1c613061015bd8fa98b24 upstream. Different channels have different TX power settings. rtl8192de is using the TX power setting from the wrong channel in the 5 GHz band because _rtl92c_phy_get_rightchnlplace expects an array which includes all the channel numbers, but it's using an array which includes only the 5 GHz channel numbers. Use the array channel_all (defined in rtl8192de/phy.c) instead of the incorrect channel5g (defined in core.c). Tested only with rtl8192du, which will use the same TX power code. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith Signed-off-by: Ping-Ke Shih Link: https://msgid.link/c7653517-cf88-4f57-b79a-8edb0a8b32f0@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c index d835a27429f0..56b5cd032a9a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c @@ -892,8 +892,8 @@ static u8 _rtl92c_phy_get_rightchnlplace(u8 chnl) u8 place = chnl; if (chnl > 14) { - for (place = 14; place < ARRAY_SIZE(channel5g); place++) { - if (channel5g[place] == chnl) { + for (place = 14; place < ARRAY_SIZE(channel_all); place++) { + if (channel_all[place] == chnl) { place++; break; } From 6973383af5324eea7eda45189ce8c26b08bb854d Mon Sep 17 00:00:00 2001 From: Bitterblue Smith Date: Thu, 25 Apr 2024 21:12:38 +0300 Subject: [PATCH 31/87] wifi: rtlwifi: rtl8192de: Fix low speed with WPA3-SAE commit a7c0f48410f546772ac94a0f7b7291a15c4fc173 upstream. Some (all?) management frames are incorrectly reported to mac80211 as decrypted when actually the hardware did not decrypt them. This results in speeds 3-5 times lower than expected, 20-30 Mbps instead of 100 Mbps. Fix this by checking the encryption type field of the RX descriptor. rtw88 does the same thing. This fix was tested only with rtl8192du, which will use the same code. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith Signed-off-by: Ping-Ke Shih Link: https://msgid.link/4d600435-f0ea-46b0-bdb4-e60f173da8dd@gmail.com Signed-off-by: Greg Kroah-Hartman --- .../net/wireless/realtek/rtlwifi/rtl8192de/trx.c | 5 ++--- .../net/wireless/realtek/rtlwifi/rtl8192de/trx.h | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c index 807b66c16e11..abe520cb9f19 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c @@ -414,7 +414,8 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, stats->icv = (u16)get_rx_desc_icv(pdesc); stats->crc = (u16)get_rx_desc_crc32(pdesc); stats->hwerror = (stats->crc | stats->icv); - stats->decrypted = !get_rx_desc_swdec(pdesc); + stats->decrypted = !get_rx_desc_swdec(pdesc) && + get_rx_desc_enc_type(pdesc) != RX_DESC_ENC_NONE; stats->rate = (u8)get_rx_desc_rxmcs(pdesc); stats->shortpreamble = (u16)get_rx_desc_splcp(pdesc); stats->isampdu = (bool)(get_rx_desc_paggr(pdesc) == 1); @@ -427,8 +428,6 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, rx_status->band = hw->conf.chandef.chan->band; if (get_rx_desc_crc32(pdesc)) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - if (!get_rx_desc_swdec(pdesc)) - rx_status->flag |= RX_FLAG_DECRYPTED; if (get_rx_desc_bw(pdesc)) rx_status->bw = RATE_INFO_BW_40; if (get_rx_desc_rxht(pdesc)) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h index d01578875cd5..6b1553239b0c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h @@ -14,6 +14,15 @@ #define USB_HWDESC_HEADER_LEN 32 #define CRCLENGTH 4 +enum rtl92d_rx_desc_enc { + RX_DESC_ENC_NONE = 0, + RX_DESC_ENC_WEP40 = 1, + RX_DESC_ENC_TKIP_WO_MIC = 2, + RX_DESC_ENC_TKIP_MIC = 3, + RX_DESC_ENC_AES = 4, + RX_DESC_ENC_WEP104 = 5, +}; + /* macros to read/write various fields in RX or TX descriptors */ static inline void set_tx_desc_pkt_size(__le32 *__pdesc, u32 __val) @@ -246,6 +255,11 @@ static inline u32 get_rx_desc_drv_info_size(__le32 *__pdesc) return le32_get_bits(*__pdesc, GENMASK(19, 16)); } +static inline u32 get_rx_desc_enc_type(__le32 *__pdesc) +{ + return le32_get_bits(*__pdesc, GENMASK(22, 20)); +} + static inline u32 get_rx_desc_shift(__le32 *__pdesc) { return le32_get_bits(*__pdesc, GENMASK(25, 24)); From 46fe2af45c19e954dbd456170819b4fe3cea365b Mon Sep 17 00:00:00 2001 From: Bitterblue Smith Date: Thu, 25 Apr 2024 21:13:12 +0300 Subject: [PATCH 32/87] wifi: rtlwifi: rtl8192de: Fix endianness issue in RX path commit 2f228d364da95ab58f63a3fedc00d5b2b7db16ab upstream. Structs rx_desc_92d and rx_fwinfo_92d will not work for big endian systems. Delete rx_desc_92d because it's big and barely used, and instead use the get_rx_desc_rxmcs and get_rx_desc_rxht functions, which work on big endian systems too. Fix rx_fwinfo_92d by duplicating four of its members in the correct order. Tested only with RTL8192DU, which will use the same code. Tested only on a little endian system. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith Signed-off-by: Ping-Ke Shih Link: https://msgid.link/698463da-5ef1-40c7-b744-fa51ad847caf@gmail.com Signed-off-by: Greg Kroah-Hartman --- .../wireless/realtek/rtlwifi/rtl8192de/trx.c | 16 ++--- .../wireless/realtek/rtlwifi/rtl8192de/trx.h | 65 ++----------------- 2 files changed, 15 insertions(+), 66 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c index abe520cb9f19..b1456fb921c2 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c @@ -35,7 +35,7 @@ static long _rtl92de_translate_todbm(struct ieee80211_hw *hw, static void _rtl92de_query_rxphystatus(struct ieee80211_hw *hw, struct rtl_stats *pstats, - struct rx_desc_92d *pdesc, + __le32 *pdesc, struct rx_fwinfo_92d *p_drvinfo, bool packet_match_bssid, bool packet_toself, @@ -49,8 +49,10 @@ static void _rtl92de_query_rxphystatus(struct ieee80211_hw *hw, u8 i, max_spatial_stream; u32 rssi, total_rssi = 0; bool is_cck_rate; + u8 rxmcs; - is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc->rxmcs); + rxmcs = get_rx_desc_rxmcs(pdesc); + is_cck_rate = rxmcs <= DESC_RATE11M; pstats->packet_matchbssid = packet_match_bssid; pstats->packet_toself = packet_toself; pstats->packet_beacon = packet_beacon; @@ -158,8 +160,8 @@ static void _rtl92de_query_rxphystatus(struct ieee80211_hw *hw, pstats->rx_pwdb_all = pwdb_all; pstats->rxpower = rx_pwr_all; pstats->recvsignalpower = rx_pwr_all; - if (pdesc->rxht && pdesc->rxmcs >= DESC_RATEMCS8 && - pdesc->rxmcs <= DESC_RATEMCS15) + if (get_rx_desc_rxht(pdesc) && rxmcs >= DESC_RATEMCS8 && + rxmcs <= DESC_RATEMCS15) max_spatial_stream = 2; else max_spatial_stream = 1; @@ -365,7 +367,7 @@ static void _rtl92de_process_phyinfo(struct ieee80211_hw *hw, static void _rtl92de_translate_rx_signal_stuff(struct ieee80211_hw *hw, struct sk_buff *skb, struct rtl_stats *pstats, - struct rx_desc_92d *pdesc, + __le32 *pdesc, struct rx_fwinfo_92d *p_drvinfo) { struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); @@ -441,9 +443,7 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, if (phystatus) { p_drvinfo = (struct rx_fwinfo_92d *)(skb->data + stats->rx_bufshift); - _rtl92de_translate_rx_signal_stuff(hw, - skb, stats, - (struct rx_desc_92d *)pdesc, + _rtl92de_translate_rx_signal_stuff(hw, skb, stats, pdesc, p_drvinfo); } /*rx_status->qual = stats->signal; */ diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h index 6b1553239b0c..eb3f768140b5 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.h @@ -394,10 +394,17 @@ struct rx_fwinfo_92d { u8 csi_target[2]; u8 sigevm; u8 max_ex_pwr; +#ifdef __LITTLE_ENDIAN u8 ex_intf_flag:1; u8 sgi_en:1; u8 rxsc:2; u8 reserve:4; +#else + u8 reserve:4; + u8 rxsc:2; + u8 sgi_en:1; + u8 ex_intf_flag:1; +#endif } __packed; struct tx_desc_92d { @@ -502,64 +509,6 @@ struct tx_desc_92d { u32 reserve_pass_pcie_mm_limit[4]; } __packed; -struct rx_desc_92d { - u32 length:14; - u32 crc32:1; - u32 icverror:1; - u32 drv_infosize:4; - u32 security:3; - u32 qos:1; - u32 shift:2; - u32 phystatus:1; - u32 swdec:1; - u32 lastseg:1; - u32 firstseg:1; - u32 eor:1; - u32 own:1; - - u32 macid:5; - u32 tid:4; - u32 hwrsvd:5; - u32 paggr:1; - u32 faggr:1; - u32 a1_fit:4; - u32 a2_fit:4; - u32 pam:1; - u32 pwr:1; - u32 moredata:1; - u32 morefrag:1; - u32 type:2; - u32 mc:1; - u32 bc:1; - - u32 seq:12; - u32 frag:4; - u32 nextpktlen:14; - u32 nextind:1; - u32 rsvd:1; - - u32 rxmcs:6; - u32 rxht:1; - u32 amsdu:1; - u32 splcp:1; - u32 bandwidth:1; - u32 htc:1; - u32 tcpchk_rpt:1; - u32 ipcchk_rpt:1; - u32 tcpchk_valid:1; - u32 hwpcerr:1; - u32 hwpcind:1; - u32 iv0:16; - - u32 iv1; - - u32 tsfl; - - u32 bufferaddress; - u32 bufferaddress64; - -} __packed; - void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc, u8 *pbd_desc_tx, struct ieee80211_tx_info *info, From 9d180538de5cb3203936684a464605eefb96742b Mon Sep 17 00:00:00 2001 From: Yang Xiwen Date: Mon, 19 Feb 2024 23:05:26 +0800 Subject: [PATCH 33/87] arm64: dts: hi3798cv200: fix the size of GICR commit 428a575dc9038846ad259466d5ba109858c0a023 upstream. During boot, Linux kernel complains: [ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set This SoC is using a regular GIC-400 and the GICR space size should be 8KB rather than 256B. With this patch: [ 0.000000] GIC: Using split EOI/Deactivate mode So this should be the correct fix. Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board") Signed-off-by: Yang Xiwen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240219-cache-v3-1-a33c57534ae9@outlook.com Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index a83b9d4f172e..add54f4e7be9 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -58,7 +58,7 @@ gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */ - <0x0 0xf1002000 0x0 0x100>; /* GICC */ + <0x0 0xf1002000 0x0 0x2000>; /* GICC */ #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; From 788fd0f11e45ae8d3a8ebbd3452a6e83f92db376 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 18 Mar 2024 11:50:59 +0200 Subject: [PATCH 34/87] media: mc: Fix graph walk in media_pipeline_start commit 8a9d420149c477e7c97fbd6453704e4612bdd3fa upstream. The graph walk tries to follow all links, even if they are not between pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link. Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK links. Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org # for 6.1 and later Fixes: ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()") Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman --- drivers/media/mc/mc-entity.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/mc/mc-entity.c b/drivers/media/mc/mc-entity.c index 8919df09e3e8..bdb8f512be57 100644 --- a/drivers/media/mc/mc-entity.c +++ b/drivers/media/mc/mc-entity.c @@ -593,6 +593,12 @@ static int media_pipeline_explore_next_link(struct media_pipeline *pipe, link = list_entry(entry->links, typeof(*link), list); last_link = media_pipeline_walk_pop(walk); + if ((link->flags & MEDIA_LNK_FL_LINK_TYPE) != MEDIA_LNK_FL_DATA_LINK) { + dev_dbg(walk->mdev->dev, + "media pipeline: skipping link (not data-link)\n"); + return 0; + } + dev_dbg(walk->mdev->dev, "media pipeline: exploring link '%s':%u -> '%s':%u\n", link->source->entity->name, link->source->index, From 9ef7ee4cb686ba28e803f3f0c4de2b92640e03e5 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 23 Feb 2024 09:46:19 +0100 Subject: [PATCH 35/87] media: mc: mark the media devnode as registered from the, start commit 4bc60736154bc9e0e39d3b88918f5d3762ebe5e0 upstream. First the media device node was created, and if successful it was marked as 'registered'. This leaves a small race condition where an application can open the device node and get an error back because the 'registered' flag was not yet set. Change the order: first set the 'registered' flag, then actually register the media device node. If that fails, then clear the flag. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Reviewed-by: Laurent Pinchart Fixes: cf4b9211b568 ("[media] media: Media device node support") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Greg Kroah-Hartman --- drivers/media/mc/mc-devnode.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/mc/mc-devnode.c b/drivers/media/mc/mc-devnode.c index 680fbb3a9340..94abd042045d 100644 --- a/drivers/media/mc/mc-devnode.c +++ b/drivers/media/mc/mc-devnode.c @@ -246,15 +246,14 @@ int __must_check media_devnode_register(struct media_device *mdev, kobject_set_name(&devnode->cdev.kobj, "media%d", devnode->minor); /* Part 3: Add the media and char device */ + set_bit(MEDIA_FLAG_REGISTERED, &devnode->flags); ret = cdev_device_add(&devnode->cdev, &devnode->dev); if (ret < 0) { + clear_bit(MEDIA_FLAG_REGISTERED, &devnode->flags); pr_err("%s: cdev_device_add failed\n", __func__); goto cdev_add_error; } - /* Part 4: Activate this minor. The char device can now be used. */ - set_bit(MEDIA_FLAG_REGISTERED, &devnode->flags); - return 0; cdev_add_error: From 5d931a26949b5b35deb740d229db84da180766b1 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 12 Jan 2024 00:40:36 +0000 Subject: [PATCH 36/87] media: mxl5xx: Move xpt structures off stack commit 526f4527545b2d4ce0733733929fac7b6da09ac6 upstream. When building for LoongArch with clang 18.0.0, the stack usage of probe() is larger than the allowed 2048 bytes: drivers/media/dvb-frontends/mxl5xx.c:1698:12: warning: stack frame size (2368) exceeds limit (2048) in 'probe' [-Wframe-larger-than] 1698 | static int probe(struct mxl *state, struct mxl5xx_cfg *cfg) | ^ 1 warning generated. This is the result of the linked LLVM commit, which changes how the arrays of structures in config_ts() get handled with CONFIG_INIT_STACK_ZERO and CONFIG_INIT_STACK_PATTERN, which causes the above warning in combination with inlining, as config_ts() gets inlined into probe(). This warning can be easily fixed by moving the array of structures off of the stackvia 'static const', which is a better location for these variables anyways because they are static data that is only ever read from, never modified, so allocating the stack space is wasteful. This drops the stack usage from 2368 bytes to 256 bytes with the same compiler and configuration. Link: https://lore.kernel.org/linux-media/20240111-dvb-mxl5xx-move-structs-off-stack-v1-1-ca4230e67c11@kernel.org Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/1977 Link: https://github.com/llvm/llvm-project/commit/afe8b93ffdfef5d8879e1894b9d7dda40dee2b8d Signed-off-by: Nathan Chancellor Reviewed-by: Miguel Ojeda Tested-by: Miguel Ojeda Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/dvb-frontends/mxl5xx.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/media/dvb-frontends/mxl5xx.c b/drivers/media/dvb-frontends/mxl5xx.c index 934d1c0b214a..1adadad172c0 100644 --- a/drivers/media/dvb-frontends/mxl5xx.c +++ b/drivers/media/dvb-frontends/mxl5xx.c @@ -1381,57 +1381,57 @@ static int config_ts(struct mxl *state, enum MXL_HYDRA_DEMOD_ID_E demod_id, u32 nco_count_min = 0; u32 clk_type = 0; - struct MXL_REG_FIELD_T xpt_sync_polarity[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_sync_polarity[MXL_HYDRA_DEMOD_MAX] = { {0x90700010, 8, 1}, {0x90700010, 9, 1}, {0x90700010, 10, 1}, {0x90700010, 11, 1}, {0x90700010, 12, 1}, {0x90700010, 13, 1}, {0x90700010, 14, 1}, {0x90700010, 15, 1} }; - struct MXL_REG_FIELD_T xpt_clock_polarity[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_clock_polarity[MXL_HYDRA_DEMOD_MAX] = { {0x90700010, 16, 1}, {0x90700010, 17, 1}, {0x90700010, 18, 1}, {0x90700010, 19, 1}, {0x90700010, 20, 1}, {0x90700010, 21, 1}, {0x90700010, 22, 1}, {0x90700010, 23, 1} }; - struct MXL_REG_FIELD_T xpt_valid_polarity[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_valid_polarity[MXL_HYDRA_DEMOD_MAX] = { {0x90700014, 0, 1}, {0x90700014, 1, 1}, {0x90700014, 2, 1}, {0x90700014, 3, 1}, {0x90700014, 4, 1}, {0x90700014, 5, 1}, {0x90700014, 6, 1}, {0x90700014, 7, 1} }; - struct MXL_REG_FIELD_T xpt_ts_clock_phase[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_ts_clock_phase[MXL_HYDRA_DEMOD_MAX] = { {0x90700018, 0, 3}, {0x90700018, 4, 3}, {0x90700018, 8, 3}, {0x90700018, 12, 3}, {0x90700018, 16, 3}, {0x90700018, 20, 3}, {0x90700018, 24, 3}, {0x90700018, 28, 3} }; - struct MXL_REG_FIELD_T xpt_lsb_first[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_lsb_first[MXL_HYDRA_DEMOD_MAX] = { {0x9070000C, 16, 1}, {0x9070000C, 17, 1}, {0x9070000C, 18, 1}, {0x9070000C, 19, 1}, {0x9070000C, 20, 1}, {0x9070000C, 21, 1}, {0x9070000C, 22, 1}, {0x9070000C, 23, 1} }; - struct MXL_REG_FIELD_T xpt_sync_byte[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_sync_byte[MXL_HYDRA_DEMOD_MAX] = { {0x90700010, 0, 1}, {0x90700010, 1, 1}, {0x90700010, 2, 1}, {0x90700010, 3, 1}, {0x90700010, 4, 1}, {0x90700010, 5, 1}, {0x90700010, 6, 1}, {0x90700010, 7, 1} }; - struct MXL_REG_FIELD_T xpt_enable_output[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_enable_output[MXL_HYDRA_DEMOD_MAX] = { {0x9070000C, 0, 1}, {0x9070000C, 1, 1}, {0x9070000C, 2, 1}, {0x9070000C, 3, 1}, {0x9070000C, 4, 1}, {0x9070000C, 5, 1}, {0x9070000C, 6, 1}, {0x9070000C, 7, 1} }; - struct MXL_REG_FIELD_T xpt_err_replace_sync[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_err_replace_sync[MXL_HYDRA_DEMOD_MAX] = { {0x9070000C, 24, 1}, {0x9070000C, 25, 1}, {0x9070000C, 26, 1}, {0x9070000C, 27, 1}, {0x9070000C, 28, 1}, {0x9070000C, 29, 1}, {0x9070000C, 30, 1}, {0x9070000C, 31, 1} }; - struct MXL_REG_FIELD_T xpt_err_replace_valid[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_err_replace_valid[MXL_HYDRA_DEMOD_MAX] = { {0x90700014, 8, 1}, {0x90700014, 9, 1}, {0x90700014, 10, 1}, {0x90700014, 11, 1}, {0x90700014, 12, 1}, {0x90700014, 13, 1}, {0x90700014, 14, 1}, {0x90700014, 15, 1} }; - struct MXL_REG_FIELD_T xpt_continuous_clock[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_continuous_clock[MXL_HYDRA_DEMOD_MAX] = { {0x907001D4, 0, 1}, {0x907001D4, 1, 1}, {0x907001D4, 2, 1}, {0x907001D4, 3, 1}, {0x907001D4, 4, 1}, {0x907001D4, 5, 1}, {0x907001D4, 6, 1}, {0x907001D4, 7, 1} }; - struct MXL_REG_FIELD_T xpt_nco_clock_rate[MXL_HYDRA_DEMOD_MAX] = { + static const struct MXL_REG_FIELD_T xpt_nco_clock_rate[MXL_HYDRA_DEMOD_MAX] = { {0x90700044, 16, 80}, {0x90700044, 16, 81}, {0x90700044, 16, 82}, {0x90700044, 16, 83}, {0x90700044, 16, 84}, {0x90700044, 16, 85}, From 7170d0c0da31931e90bdb34ed24101582bdc7b2f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 23 Feb 2024 09:45:36 +0100 Subject: [PATCH 37/87] media: v4l2-core: hold videodev_lock until dev reg, finishes commit 1ed4477f2ea4743e7c5e1f9f3722152d14e6eeb1 upstream. After the new V4L2 device node was registered, some additional initialization was done before the device node was marked as 'registered'. During the time between creating the device node and marking it as 'registered' it was possible to open the device node, which would return -ENODEV since the 'registered' flag was not yet set. Hold the videodev_lock mutex from just before the device node is registered until the 'registered' flag is set. Since v4l2_open will take the same lock, it will wait until this registration process is finished. This resolves this race condition. Signed-off-by: Hans Verkuil Reviewed-by: Sakari Ailus Cc: # for vi4.18 and up Signed-off-by: Greg Kroah-Hartman --- drivers/media/v4l2-core/v4l2-dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c index 397d553177fa..e73c749c99bd 100644 --- a/drivers/media/v4l2-core/v4l2-dev.c +++ b/drivers/media/v4l2-core/v4l2-dev.c @@ -1033,8 +1033,10 @@ int __video_register_device(struct video_device *vdev, vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor); vdev->dev.parent = vdev->dev_parent; dev_set_name(&vdev->dev, "%s%d", name_base, vdev->num); + mutex_lock(&videodev_lock); ret = device_register(&vdev->dev); if (ret < 0) { + mutex_unlock(&videodev_lock); pr_err("%s: device_register failed\n", __func__); goto cleanup; } @@ -1054,6 +1056,7 @@ int __video_register_device(struct video_device *vdev, /* Part 6: Activate this minor. The char device can now be used. */ set_bit(V4L2_FL_REGISTERED, &vdev->flags); + mutex_unlock(&videodev_lock); return 0; From 36a28616d4dee5ac48c9b98f61cf442f1d307f9e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Apr 2024 21:16:34 +0200 Subject: [PATCH 38/87] mmc: core: Add mmc_gpiod_set_cd_config() function commit 63a7cd660246aa36af263b85c33ecc6601bf04be upstream. Some mmc host drivers may need to fixup a card-detection GPIO's config to e.g. enable the GPIO controllers builtin pull-up resistor on devices where the firmware description of the GPIO is broken (e.g. GpioInt with PullNone instead of PullUp in ACPI DSDT). Since this is the exception rather then the rule adding a config parameter to mmc_gpiod_request_cd() seems undesirable, so instead add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper to call gpiod_set_config() on the card-detect GPIO acquired through mmc_gpiod_request_cd(). Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/core/slot-gpio.c | 20 ++++++++++++++++++++ include/linux/mmc/slot-gpio.h | 1 + 2 files changed, 21 insertions(+) diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index e3c69c6b85a6..d5145c1ee81e 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -206,6 +206,26 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, } EXPORT_SYMBOL(mmc_gpiod_request_cd); +/** + * mmc_gpiod_set_cd_config - set config for card-detection GPIO + * @host: mmc host + * @config: Generic pinconf config (from pinconf_to_config_packed()) + * + * This can be used by mmc host drivers to fixup a card-detection GPIO's config + * (e.g. set PIN_CONFIG_BIAS_PULL_UP) after acquiring the GPIO descriptor + * through mmc_gpiod_request_cd(). + * + * Returns: + * 0 on success, or a negative errno value on error. + */ +int mmc_gpiod_set_cd_config(struct mmc_host *host, unsigned long config) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + return gpiod_set_config(ctx->cd_gpio, config); +} +EXPORT_SYMBOL(mmc_gpiod_set_cd_config); + bool mmc_can_gpio_cd(struct mmc_host *host) { struct mmc_gpio *ctx = host->slot.handler_priv; diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index 4ae2f2908f99..d4a1567c94d0 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -20,6 +20,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int debounce); int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, unsigned int idx, unsigned int debounce); +int mmc_gpiod_set_cd_config(struct mmc_host *host, unsigned long config); void mmc_gpio_set_cd_isr(struct mmc_host *host, irqreturn_t (*isr)(int irq, void *dev_id)); int mmc_gpio_set_cd_wake(struct mmc_host *host, bool on); From 32b76505ba18cbbfd7c41f7962937bea5481502c Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 10 Apr 2024 21:16:35 +0200 Subject: [PATCH 39/87] mmc: sdhci: Add support for "Tuning Error" interrupts commit b3855668d98cf9c6aec2db999dd27d872f8ba878 upstream. Most Bay Trail devices do not enable UHS modes for the external sdcard slot the Lenovo Yoga Tablet 2 830 / 1050 and Lenovo Yoga Tablet 2 Pro 1380 (8", 10" and 13") models however do enable this. Using a UHS cards in these tablets results in errors like this one: [ 225.272001] mmc2: Unexpected interrupt 0x04000000. [ 225.272024] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 225.272034] mmc2: sdhci: Sys addr: 0x0712c400 | Version: 0x0000b502 [ 225.272044] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000007 [ 225.272054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 [ 225.272064] mmc2: sdhci: Present: 0x01e20002 | Host ctl: 0x00000016 [ 225.272073] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 225.272082] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107 [ 225.272092] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000001 [ 225.272101] mmc2: sdhci: Int enab: 0x03ff000b | Sig enab: 0x03ff000b [ 225.272110] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 225.272119] mmc2: sdhci: Caps: 0x076864b2 | Caps_1: 0x00000004 [ 225.272129] mmc2: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000 [ 225.272138] mmc2: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000 [ 225.272147] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000900 [ 225.272155] mmc2: sdhci: Host ctl2: 0x0000000c [ 225.272164] mmc2: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x0712c200 [ 225.272172] mmc2: sdhci: ============================================ which results in IO errors leading to issues accessing the sdcard. 0x04000000 is a so-called "Tuning Error" which sofar the SDHCI driver does not support / enable. Modify the IRQ handler to process these. This fixes UHS microsd cards not working with these tablets. Link: https://lore.kernel.org/r/199bb4aa-c6b5-453e-be37-58bbf468800c@intel.com Signed-off-by: Hans de Goede Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-3-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci.c | 10 ++++++++-- drivers/mmc/host/sdhci.h | 3 ++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ad73d528a1bd..111f7c677060 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3466,12 +3466,18 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) host->data->error = -EILSEQ; if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)))) sdhci_err_stats_inc(host, DAT_CRC); - } else if ((intmask & SDHCI_INT_DATA_CRC) && + } else if ((intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_TUNING_ERROR)) && SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) != MMC_BUS_TEST_R) { host->data->error = -EILSEQ; if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)))) sdhci_err_stats_inc(host, DAT_CRC); + if (intmask & SDHCI_INT_TUNING_ERROR) { + u16 ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); + } } else if (intmask & SDHCI_INT_ADMA_ERROR) { pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc), intmask); @@ -4006,7 +4012,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, } else *cmd_error = 0; - if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) { + if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC | SDHCI_INT_TUNING_ERROR)) { *data_error = -EILSEQ; if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)))) sdhci_err_stats_inc(host, DAT_CRC); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 5ce7cdcc192f..901482d5e73f 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -151,6 +151,7 @@ #define SDHCI_INT_BUS_POWER 0x00800000 #define SDHCI_INT_AUTO_CMD_ERR 0x01000000 #define SDHCI_INT_ADMA_ERROR 0x02000000 +#define SDHCI_INT_TUNING_ERROR 0x04000000 #define SDHCI_INT_NORMAL_MASK 0x00007FFF #define SDHCI_INT_ERROR_MASK 0xFFFF8000 @@ -162,7 +163,7 @@ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ - SDHCI_INT_BLK_GAP) + SDHCI_INT_BLK_GAP | SDHCI_INT_TUNING_ERROR) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_CQE_INT_ERR_MASK ( \ From c2107d3024a5dd3fa8e30c15a45f0005ba4722cb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Apr 2024 21:16:36 +0200 Subject: [PATCH 40/87] mmc: sdhci-acpi: Sort DMI quirks alphabetically commit a92a73b1d9249d155412d8ac237142fa716803ea upstream. Sort the DMI quirks alphabetically. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-4-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-acpi.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index b917060a258a..ab0d704d2537 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -719,7 +719,20 @@ static const struct acpi_device_id sdhci_acpi_ids[] = { }; MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids); +/* Please keep this list sorted alphabetically */ static const struct dmi_system_id sdhci_acpi_quirks[] = { + { + /* + * The Acer Aspire Switch 10 (SW5-012) microSD slot always + * reports the card being write-protected even though microSD + * cards do not have a write-protect switch at all. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), + }, + .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, + }, { /* * The Lenovo Miix 320-10ICR has a bug in the _PS0 method of @@ -734,18 +747,6 @@ static const struct dmi_system_id sdhci_acpi_quirks[] = { }, .driver_data = (void *)DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP, }, - { - /* - * The Acer Aspire Switch 10 (SW5-012) microSD slot always - * reports the card being write-protected even though microSD - * cards do not have a write-protect switch at all. - */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), - }, - .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, - }, { /* * The Toshiba WT8-B's microSD slot always reports the card being From 21109f137a2b2f5a4a4dfed0b7211975ce5db6bc Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Apr 2024 21:16:37 +0200 Subject: [PATCH 41/87] mmc: sdhci-acpi: Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working commit f3521d7cbaefff19cc656325787ed797e5f6a955 upstream. The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin and a broken wp pin which always reports the card being write-protected. Add a DMI quirk to address both issues. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-5-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-acpi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index ab0d704d2537..a08248d065e6 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -80,6 +80,7 @@ struct sdhci_acpi_host { enum { DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP = BIT(0), DMI_QUIRK_SD_NO_WRITE_PROTECT = BIT(1), + DMI_QUIRK_SD_CD_ACTIVE_HIGH = BIT(2), }; static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c) @@ -747,6 +748,26 @@ static const struct dmi_system_id sdhci_acpi_quirks[] = { }, .driver_data = (void *)DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP, }, + { + /* + * Lenovo Yoga Tablet 2 Pro 1380F/L (13" Android version) this + * has broken WP reporting and an inverted CD signal. + * Note this has more or less the same BIOS as the Lenovo Yoga + * Tablet 2 830F/L or 1050F/L (8" and 10" Android), but unlike + * the 830 / 1050 models which share the same mainboard this + * model has a different mainboard and the inverted CD and + * broken WP are unique to this board. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"), + /* Full match so as to NOT match the 830/1050 BIOS */ + DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21.X64.0005.R00.1504101516"), + }, + .driver_data = (void *)(DMI_QUIRK_SD_NO_WRITE_PROTECT | + DMI_QUIRK_SD_CD_ACTIVE_HIGH), + }, { /* * The Toshiba WT8-B's microSD slot always reports the card being @@ -867,6 +888,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev) if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) { bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL); + if (quirks & DMI_QUIRK_SD_CD_ACTIVE_HIGH) + host->mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0); if (err) { if (err == -EPROBE_DEFER) From 4ac34dc6b494ddd09e86f172ce99fa0a903d4cf7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Apr 2024 21:16:38 +0200 Subject: [PATCH 42/87] mmc: sdhci-acpi: Disable write protect detection on Toshiba WT10-A commit ef3eab75e17191e5665f52e64e85bc29d5705a7b upstream. On the Toshiba WT10-A the microSD slot always reports the card being write-protected, just like on the Toshiba WT8-B. Add a DMI quirk to work around this. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-6-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-acpi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index a08248d065e6..d8cc526cc88e 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -779,6 +779,17 @@ static const struct dmi_system_id sdhci_acpi_quirks[] = { }, .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, }, + { + /* + * The Toshiba WT10-A's microSD slot always reports the card being + * write-protected. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT10-A"), + }, + .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, + }, {} /* Terminating entry */ }; From 1a156761fc74e1d228bb0a376454e60d65d64690 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Apr 2024 21:16:39 +0200 Subject: [PATCH 43/87] mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA commit 431946c0f640c93421439a6c928efb3152c035a4 upstream. The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models stopped working under Linux after commit 6fd03f024828 ("gpiolib: acpi: support bias pull disable"). The GPIO in question is connected to a mechanical switch in the slot which shorts the pin to GND when a card is inserted. The GPIO pin correctly gets configured with a 20K pull-up by the BIOS, but there is a bug in the DSDT where the GpioInt for the card-detect is configured with a PullNone setting: GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x0026 } Linux now actually honors the PullNone setting and disables the 20K pull-up configured by the BIOS. Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for the Asus T100TA models to fix this. Fixes: 6fd03f024828 ("gpiolib: acpi: support bias pull disable") Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@redhat.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-acpi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index d8cc526cc88e..eea0a7ddb551 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -81,6 +82,7 @@ enum { DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP = BIT(0), DMI_QUIRK_SD_NO_WRITE_PROTECT = BIT(1), DMI_QUIRK_SD_CD_ACTIVE_HIGH = BIT(2), + DMI_QUIRK_SD_CD_ENABLE_PULL_UP = BIT(3), }; static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c) @@ -734,6 +736,14 @@ static const struct dmi_system_id sdhci_acpi_quirks[] = { }, .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, }, + { + /* Asus T100TA, needs pull-up for cd but DSDT GpioInt has NoPull set */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), + }, + .driver_data = (void *)DMI_QUIRK_SD_CD_ENABLE_PULL_UP, + }, { /* * The Lenovo Miix 320-10ICR has a bug in the _PS0 method of @@ -908,6 +918,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev) goto err_free; dev_warn(dev, "failed to setup card detect gpio\n"); c->use_runtime_pm = false; + } else if (quirks & DMI_QUIRK_SD_CD_ENABLE_PULL_UP) { + mmc_gpiod_set_cd_config(host->mmc, + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 20000)); } if (quirks & DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP) From edaa57480b876e8203b51df7c3d14a51ea6b09e3 Mon Sep 17 00:00:00 2001 From: Cai Xinchen Date: Tue, 16 Apr 2024 06:51:37 +0000 Subject: [PATCH 44/87] fbdev: savage: Handle err return when savagefb_check_var failed commit 6ad959b6703e2c4c5d7af03b4cfd5ff608036339 upstream. The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error. Fixes: 04e5eac8f3ab ("fbdev: savage: Error out if pixclock equals zero") Signed-off-by: Cai Xinchen Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/savage/savagefb_driver.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index a7b63c475f95..78eee242fc99 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -2277,7 +2277,10 @@ static int savagefb_probe(struct pci_dev *dev, const struct pci_device_id *id) if (info->var.xres_virtual > 0x1000) info->var.xres_virtual = 0x1000; #endif - savagefb_check_var(&info->var, info); + err = savagefb_check_var(&info->var, info); + if (err) + goto failed; + savagefb_set_fix(info); /* From 97820893f2ad35aa98b04cbaff4d29b617e2836d Mon Sep 17 00:00:00 2001 From: Li Ma Date: Mon, 20 May 2024 18:43:55 +0800 Subject: [PATCH 45/87] drm/amdgpu/atomfirmware: add intergrated info v2.3 table commit e64e8f7c178e5228e0b2dbb504b9dc75953a319f upstream. [Why] The vram width value is 0. Because the integratedsysteminfo table in VBIOS has updated to 2.3. [How] Driver needs a new intergrated info v2.3 table too. Then the vram width value will be correct. Signed-off-by: Li Ma Reviewed-by: Yifan Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- .../gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c | 15 +++++++ drivers/gpu/drm/amd/include/atomfirmware.h | 43 +++++++++++++++++++ 2 files changed, 58 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c index 9b97fa39d47a..0d017dc94f01 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c @@ -207,6 +207,7 @@ union igp_info { struct atom_integrated_system_info_v1_11 v11; struct atom_integrated_system_info_v1_12 v12; struct atom_integrated_system_info_v2_1 v21; + struct atom_integrated_system_info_v2_3 v23; }; union umc_info { @@ -347,6 +348,20 @@ amdgpu_atomfirmware_get_vram_info(struct amdgpu_device *adev, if (vram_type) *vram_type = convert_atom_mem_type_to_vram_type(adev, mem_type); break; + case 3: + mem_channel_number = igp_info->v23.umachannelnumber; + if (!mem_channel_number) + mem_channel_number = 1; + mem_type = igp_info->v23.memorytype; + if (mem_type == LpDdr5MemType) + mem_channel_width = 32; + else + mem_channel_width = 64; + if (vram_width) + *vram_width = mem_channel_number * mem_channel_width; + if (vram_type) + *vram_type = convert_atom_mem_type_to_vram_type(adev, mem_type); + break; default: return -EINVAL; } diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h index bbe1337a8cee..e2207f1c5bad 100644 --- a/drivers/gpu/drm/amd/include/atomfirmware.h +++ b/drivers/gpu/drm/amd/include/atomfirmware.h @@ -1624,6 +1624,49 @@ struct atom_integrated_system_info_v2_2 uint32_t reserved4[189]; }; +struct uma_carveout_option { + char optionName[29]; //max length of string is 28chars + '\0'. Current design is for "minimum", "Medium", "High". This makes entire struct size 64bits + uint8_t memoryCarvedGb; //memory carved out with setting + uint8_t memoryRemainingGb; //memory remaining on system + union { + struct _flags { + uint8_t Auto : 1; + uint8_t Custom : 1; + uint8_t Reserved : 6; + } flags; + uint8_t all8; + } uma_carveout_option_flags; +}; + +struct atom_integrated_system_info_v2_3 { + struct atom_common_table_header table_header; + uint32_t vbios_misc; // enum of atom_system_vbiosmisc_def + uint32_t gpucapinfo; // enum of atom_system_gpucapinf_def + uint32_t system_config; + uint32_t cpucapinfo; + uint16_t gpuclk_ss_percentage; // unit of 0.001%, 1000 mean 1% + uint16_t gpuclk_ss_type; + uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def + uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication. + uint8_t umachannelnumber; // number of memory channels + uint8_t htc_hyst_limit; + uint8_t htc_tmp_limit; + uint8_t reserved1; // dp_ss_control + uint8_t gpu_package_id; + struct edp_info_table edp1_info; + struct edp_info_table edp2_info; + uint32_t reserved2[8]; + struct atom_external_display_connection_info extdispconninfo; + uint8_t UMACarveoutVersion; + uint8_t UMACarveoutIndexMax; + uint8_t UMACarveoutTypeDefault; + uint8_t UMACarveoutIndexDefault; + uint8_t UMACarveoutType; //Auto or Custom + uint8_t UMACarveoutIndex; + struct uma_carveout_option UMASizeControlOption[20]; + uint8_t reserved3[110]; +}; + // system_config enum atom_system_vbiosmisc_def{ INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT = 0x01, From cb299cdba09f46f090b843d78ba26b667d50a456 Mon Sep 17 00:00:00 2001 From: Dominique Martinet Date: Tue, 21 May 2024 21:13:36 +0900 Subject: [PATCH 46/87] 9p: add missing locking around taking dentry fid list commit c898afdc15645efb555acb6d85b484eb40a45409 upstream. Fix a use-after-free on dentry's d_fsdata fid list when a thread looks up a fid through dentry while another thread unlinks it: UAF thread: refcount_t: addition on 0; use-after-free. p9_fid_get linux/./include/net/9p/client.h:262 v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129 v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181 v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314 v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400 vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248 Freed by: p9_fid_destroy (inlined) p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456 p9_fid_put linux/./include/net/9p/client.h:278 v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55 v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518 vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335 The problem is that d_fsdata was not accessed under d_lock, because d_release() normally is only called once the dentry is otherwise no longer accessible but since we also call it explicitly in v9fs_remove that lock is required: move the hlist out of the dentry under lock then unref its fids once they are no longer accessible. Fixes: 154372e67d40 ("fs/9p: fix create-unlink-getattr idiom") Cc: stable@vger.kernel.org Reported-by: Meysam Firouzi Reported-by: Amirmohammad Eftekhar Reviewed-by: Christian Schoenebeck Message-ID: <20240521122947.1080227-1-asmadeus@codewreck.org> Signed-off-by: Dominique Martinet Signed-off-by: Greg Kroah-Hartman --- fs/9p/vfs_dentry.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c index f89f01734587..55990098795e 100644 --- a/fs/9p/vfs_dentry.c +++ b/fs/9p/vfs_dentry.c @@ -50,12 +50,17 @@ static int v9fs_cached_dentry_delete(const struct dentry *dentry) static void v9fs_dentry_release(struct dentry *dentry) { struct hlist_node *p, *n; + struct hlist_head head; p9_debug(P9_DEBUG_VFS, " dentry: %pd (%p)\n", dentry, dentry); - hlist_for_each_safe(p, n, (struct hlist_head *)&dentry->d_fsdata) + + spin_lock(&dentry->d_lock); + hlist_move_list((struct hlist_head *)&dentry->d_fsdata, &head); + spin_unlock(&dentry->d_lock); + + hlist_for_each_safe(p, n, &head) p9_fid_put(hlist_entry(p, struct p9_fid, dlist)); - dentry->d_fsdata = NULL; } static int v9fs_lookup_revalidate(struct dentry *dentry, unsigned int flags) From 7da44257e64b248b2d0f0a8a70046b9501ee92c6 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Sun, 26 May 2024 07:59:08 -0500 Subject: [PATCH 47/87] drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms commit 267cace556e8a53d703119f7435ab556209e5b6a upstream. commit cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues that were reported since commit 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") but caused issues for some people. Adjust the workaround flow to properly only apply in the S4 case: -> For shutdown go through SMU_MSG_PrepareMp1ForUnload -> For S4 go through SMU_MSG_GfxDeviceDriverReset and SMU_MSG_PrepareMp1ForUnload Reported-and-tested-by: lectrode Closes: https://github.com/void-linux/void-packages/issues/50417 Cc: stable@vger.kernel.org Fixes: cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") Reviewed-by: Tim Huang Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman --- .../drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 20 ++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c index 5de31961319a..b464a1f7e393 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c @@ -222,15 +222,17 @@ static int smu_v13_0_4_system_features_control(struct smu_context *smu, bool en) struct amdgpu_device *adev = smu->adev; int ret = 0; - if (!en && adev->in_s4) { - /* Adds a GFX reset as workaround just before sending the - * MP1_UNLOAD message to prevent GC/RLC/PMFW from entering - * an invalid state. - */ - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxDeviceDriverReset, - SMU_RESET_MODE_2, NULL); - if (ret) - return ret; + if (!en && !adev->in_s0ix) { + if (adev->in_s4) { + /* Adds a GFX reset as workaround just before sending the + * MP1_UNLOAD message to prevent GC/RLC/PMFW from entering + * an invalid state. + */ + ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxDeviceDriverReset, + SMU_RESET_MODE_2, NULL); + if (ret) + return ret; + } ret = smu_cmn_send_smc_msg(smu, SMU_MSG_PrepareMp1ForUnload, NULL); } From 4f902f03ef57f9a80b157a6a05f6b77211be9a4a Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 24 May 2024 15:19:54 +0100 Subject: [PATCH 48/87] KVM: arm64: Fix AArch32 register narrowing on userspace write commit 947051e361d551e0590777080ffc4926190f62f2 upstream. When userspace writes to one of the core registers, we make sure to narrow the corresponding GPRs if PSTATE indicates an AArch32 context. The code tries to check whether the context is EL0 or EL1 so that it narrows the correct registers. But it does so by checking the full PSTATE instead of PSTATE.M. As a consequence, and if we are restoring an AArch32 EL0 context in a 64bit guest, and that PSTATE has *any* bit set outside of PSTATE.M, we narrow *all* registers instead of only the first 15, destroying the 64bit state. Obviously, this is not something the guest is likely to enjoy. Correctly masking PSTATE to only evaluate PSTATE.M fixes it. Fixes: 90c1f934ed71 ("KVM: arm64: Get rid of the AArch32 register mapping code") Reported-by: Nina Schoetterl-Glausch Cc: stable@vger.kernel.org Reviewed-by: Nina Schoetterl-Glausch Acked-by: Oliver Upton Link: https://lore.kernel.org/r/20240524141956.1450304-2-maz@kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman --- arch/arm64/kvm/guest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index f44ae09a5195..9ee887a9523d 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -270,7 +270,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) { int i, nr_reg; - switch (*vcpu_cpsr(vcpu)) { + switch (*vcpu_cpsr(vcpu) & PSR_AA32_MODE_MASK) { /* * Either we are dealing with user mode, and only the * first 15 registers (+ PC) must be narrowed to 32bit. From 5b12ce0b6fd9956c6825f04fb00544ff8d302bd4 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 24 May 2024 15:19:55 +0100 Subject: [PATCH 49/87] KVM: arm64: Allow AArch32 PSTATE.M to be restored as System mode commit dfe6d190f38fc5df5ff2614b463a5195a399c885 upstream. It appears that we don't allow a vcpu to be restored in AArch32 System mode, as we *never* included it in the list of valid modes. Just add it to the list of allowed modes. Fixes: 0d854a60b1d7 ("arm64: KVM: enable initialization of a 32bit vcpu") Cc: stable@vger.kernel.org Acked-by: Oliver Upton Link: https://lore.kernel.org/r/20240524141956.1450304-3-maz@kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman --- arch/arm64/kvm/guest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 9ee887a9523d..5dbaf3fe9022 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -250,6 +250,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) case PSR_AA32_MODE_SVC: case PSR_AA32_MODE_ABT: case PSR_AA32_MODE_UND: + case PSR_AA32_MODE_SYS: if (!vcpu_el1_is_32bit(vcpu)) return -EINVAL; break; From e0032f5c086d3e28a7ed2e247fba6ab6517877c6 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 24 May 2024 15:19:56 +0100 Subject: [PATCH 50/87] KVM: arm64: AArch32: Fix spurious trapping of conditional instructions commit c92e8b9eacebb4060634ebd9395bba1b29aadc68 upstream. We recently upgraded the view of ESR_EL2 to 64bit, in keeping with the requirements of the architecture. However, the AArch32 emulation code was left unaudited, and the (already dodgy) code that triages whether a trap is spurious or not (because the condition code failed) broke in a subtle way: If ESR_EL2.ISS2 is ever non-zero (unlikely, but hey, this is the ARM architecture we're talking about), the hack that tests the top bits of ESR_EL2.EC will break in an interesting way. Instead, use kvm_vcpu_trap_get_class() to obtain the EC, and list all the possible ECs that can fail a condition code check. While we're at it, add SMC32 to the list, as it is explicitly listed as being allowed to trap despite failing a condition code check (as described in the HCR_EL2.TSC documentation). Fixes: 0b12620fddb8 ("KVM: arm64: Treat ESR_EL2 as a 64-bit register") Cc: stable@vger.kernel.org Acked-by: Oliver Upton Link: https://lore.kernel.org/r/20240524141956.1450304-4-maz@kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman --- arch/arm64/kvm/hyp/aarch32.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/hyp/aarch32.c b/arch/arm64/kvm/hyp/aarch32.c index f98cbe2626a1..19efb41aab80 100644 --- a/arch/arm64/kvm/hyp/aarch32.c +++ b/arch/arm64/kvm/hyp/aarch32.c @@ -50,9 +50,23 @@ bool kvm_condition_valid32(const struct kvm_vcpu *vcpu) u32 cpsr_cond; int cond; - /* Top two bits non-zero? Unconditional. */ - if (kvm_vcpu_get_esr(vcpu) >> 30) + /* + * These are the exception classes that could fire with a + * conditional instruction. + */ + switch (kvm_vcpu_trap_get_class(vcpu)) { + case ESR_ELx_EC_CP15_32: + case ESR_ELx_EC_CP15_64: + case ESR_ELx_EC_CP14_MR: + case ESR_ELx_EC_CP14_LS: + case ESR_ELx_EC_FP_ASIMD: + case ESR_ELx_EC_CP10_ID: + case ESR_ELx_EC_CP14_64: + case ESR_ELx_EC_SVC32: + break; + default: return true; + } /* Is condition field valid? */ cond = kvm_vcpu_get_condition(vcpu); From 458458c130ca6f530fb6cd6c4299064e3ad887e8 Mon Sep 17 00:00:00 2001 From: Stefan Berger Date: Thu, 21 Mar 2024 10:44:33 -0400 Subject: [PATCH 51/87] crypto: ecdsa - Fix module auto-load on add-key commit 48e4fd6d54f54d0ceab5a952d73e47a9454a6ccb upstream. Add module alias with the algorithm cra_name similar to what we have for RSA-related and other algorithms. The kernel attempts to modprobe asymmetric algorithms using the names "crypto-$cra_name" and "crypto-$cra_name-all." However, since these aliases are currently missing, the modules are not loaded. For instance, when using the `add_key` function, the hash algorithm is typically loaded automatically, but the asymmetric algorithm is not. Steps to test: 1. Create certificate openssl req -x509 -sha256 -newkey ec \ -pkeyopt "ec_paramgen_curve:secp384r1" -keyout key.pem -days 365 \ -subj '/CN=test' -nodes -outform der -out nist-p384.der 2. Optionally, trace module requests with: trace-cmd stream -e module & 3. Trigger add_key call for the cert: # keyctl padd asymmetric "" @u < nist-p384.der 641069229 # lsmod | head -2 Module Size Used by ecdsa_generic 16384 0 Fixes: c12d448ba939 ("crypto: ecdsa - Register NIST P384 and extend test suite") Cc: stable@vger.kernel.org Signed-off-by: Stefan Berger Reviewed-by: Vitaly Chikunov Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman --- crypto/ecdsa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/crypto/ecdsa.c b/crypto/ecdsa.c index fbd76498aba8..3f9ec273a121 100644 --- a/crypto/ecdsa.c +++ b/crypto/ecdsa.c @@ -373,4 +373,7 @@ module_exit(ecdsa_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Stefan Berger "); MODULE_DESCRIPTION("ECDSA generic algorithm"); +MODULE_ALIAS_CRYPTO("ecdsa-nist-p192"); +MODULE_ALIAS_CRYPTO("ecdsa-nist-p256"); +MODULE_ALIAS_CRYPTO("ecdsa-nist-p384"); MODULE_ALIAS_CRYPTO("ecdsa-generic"); From dd999fdeeead4834b7c56ff1b2821a4aac42ddfd Mon Sep 17 00:00:00 2001 From: Vitaly Chikunov Date: Mon, 18 Mar 2024 03:42:40 +0300 Subject: [PATCH 52/87] crypto: ecrdsa - Fix module auto-load on add_key commit eb5739a1efbc9ff216271aeea0ebe1c92e5383e5 upstream. Add module alias with the algorithm cra_name similar to what we have for RSA-related and other algorithms. The kernel attempts to modprobe asymmetric algorithms using the names "crypto-$cra_name" and "crypto-$cra_name-all." However, since these aliases are currently missing, the modules are not loaded. For instance, when using the `add_key` function, the hash algorithm is typically loaded automatically, but the asymmetric algorithm is not. Steps to test: 1. Cert is generated usings ima-evm-utils test suite with `gen-keys.sh`, example cert is provided below: $ base64 -d >test-gost2012_512-A.cer < Cc: stable@vger.kernel.org Signed-off-by: Vitaly Chikunov Tested-by: Stefan Berger Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman --- crypto/ecrdsa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/ecrdsa.c b/crypto/ecrdsa.c index f3c6b5e15e75..3811f3805b5d 100644 --- a/crypto/ecrdsa.c +++ b/crypto/ecrdsa.c @@ -294,4 +294,5 @@ module_exit(ecrdsa_mod_fini); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Vitaly Chikunov "); MODULE_DESCRIPTION("EC-RDSA generic algorithm"); +MODULE_ALIAS_CRYPTO("ecrdsa"); MODULE_ALIAS_CRYPTO("ecrdsa-generic"); From e7428e7e3fe94a5089dc12ffe5bc31574d2315ad Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 8 May 2024 16:39:51 +0800 Subject: [PATCH 53/87] crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak commit d3b17c6d9dddc2db3670bc9be628b122416a3d26 upstream. Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely. Fixes: 7d42e097607c ("crypto: qat - resolve race condition during AER recovery") Cc: #6.8+ Signed-off-by: Herbert Xu Reviewed-by: Giovanni Cabiddu Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman --- drivers/crypto/qat/qat_common/adf_aer.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/crypto/qat/qat_common/adf_aer.c b/drivers/crypto/qat/qat_common/adf_aer.c index 4f36b5a9164a..d4bf6cd927a2 100644 --- a/drivers/crypto/qat/qat_common/adf_aer.c +++ b/drivers/crypto/qat/qat_common/adf_aer.c @@ -95,8 +95,7 @@ static void adf_device_reset_worker(struct work_struct *work) if (adf_dev_init(accel_dev) || adf_dev_start(accel_dev)) { /* The device hanged and we can't restart it so stop here */ dev_err(&GET_DEV(accel_dev), "Restart device failed\n"); - if (reset_data->mode == ADF_DEV_RESET_ASYNC || - completion_done(&reset_data->compl)) + if (reset_data->mode == ADF_DEV_RESET_ASYNC) kfree(reset_data); WARN(1, "QAT: device restart failed. Device is unusable\n"); return; @@ -104,16 +103,8 @@ static void adf_device_reset_worker(struct work_struct *work) adf_dev_restarted_notify(accel_dev); clear_bit(ADF_STATUS_RESTARTING, &accel_dev->status); - /* - * The dev is back alive. Notify the caller if in sync mode - * - * If device restart will take a more time than expected, - * the schedule_reset() function can timeout and exit. This can be - * detected by calling the completion_done() function. In this case - * the reset_data structure needs to be freed here. - */ - if (reset_data->mode == ADF_DEV_RESET_ASYNC || - completion_done(&reset_data->compl)) + /* The dev is back alive. Notify the caller if in sync mode */ + if (reset_data->mode == ADF_DEV_RESET_ASYNC) kfree(reset_data); else complete(&reset_data->compl); @@ -148,10 +139,10 @@ static int adf_dev_aer_schedule_reset(struct adf_accel_dev *accel_dev, if (!timeout) { dev_err(&GET_DEV(accel_dev), "Reset device timeout expired\n"); + cancel_work_sync(&reset_data->reset_work); ret = -EFAULT; - } else { - kfree(reset_data); } + kfree(reset_data); return ret; } return 0; From 7a2bc8b34ed7c7c543ee8ddb3c09e98b7cf2c2b3 Mon Sep 17 00:00:00 2001 From: Ryan Roberts Date: Wed, 1 May 2024 15:33:10 +0100 Subject: [PATCH 54/87] mm: fix race between __split_huge_pmd_locked() and GUP-fast commit 3a5a8d343e1cf96eb9971b17cbd4b832ab19b8e7 upstream. __split_huge_pmd_locked() can be called for a present THP, devmap or (non-present) migration entry. It calls pmdp_invalidate() unconditionally on the pmdp and only determines if it is present or not based on the returned old pmd. This is a problem for the migration entry case because pmd_mkinvalid(), called by pmdp_invalidate() must only be called for a present pmd. On arm64 at least, pmd_mkinvalid() will mark the pmd such that any future call to pmd_present() will return true. And therefore any lockless pgtable walker could see the migration entry pmd in this state and start interpretting the fields as if it were present, leading to BadThings (TM). GUP-fast appears to be one such lockless pgtable walker. x86 does not suffer the above problem, but instead pmd_mkinvalid() will corrupt the offset field of the swap entry within the swap pte. See link below for discussion of that problem. Fix all of this by only calling pmdp_invalidate() for a present pmd. And for good measure let's add a warning to all implementations of pmdp_invalidate[_ad](). I've manually reviewed all other pmdp_invalidate[_ad]() call sites and believe all others to be conformant. This is a theoretical bug found during code review. I don't have any test case to trigger it in practice. Link: https://lkml.kernel.org/r/20240501143310.1381675-1-ryan.roberts@arm.com Link: https://lore.kernel.org/all/0dd7827a-6334-439a-8fd0-43c98e6af22b@arm.com/ Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Ryan Roberts Reviewed-by: Zi Yan Reviewed-by: Anshuman Khandual Acked-by: David Hildenbrand Cc: Andreas Larsson Cc: Andy Lutomirski Cc: Aneesh Kumar K.V Cc: Borislav Petkov (AMD) Cc: Catalin Marinas Cc: Christian Borntraeger Cc: Christophe Leroy Cc: Dave Hansen Cc: "David S. Miller" Cc: Ingo Molnar Cc: Jonathan Corbet Cc: Mark Rutland Cc: Naveen N. Rao Cc: Nicholas Piggin Cc: Peter Zijlstra Cc: Sven Schnelle Cc: Thomas Gleixner Cc: Will Deacon Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/mm/arch_pgtable_helpers.rst | 6 ++- arch/powerpc/mm/book3s64/pgtable.c | 1 + arch/s390/include/asm/pgtable.h | 4 +- arch/sparc/mm/tlb.c | 1 + arch/x86/mm/pgtable.c | 2 + mm/huge_memory.c | 49 ++++++++++++----------- mm/pgtable-generic.c | 2 + 7 files changed, 39 insertions(+), 26 deletions(-) diff --git a/Documentation/mm/arch_pgtable_helpers.rst b/Documentation/mm/arch_pgtable_helpers.rst index cbaee9e59241..511b4314095b 100644 --- a/Documentation/mm/arch_pgtable_helpers.rst +++ b/Documentation/mm/arch_pgtable_helpers.rst @@ -136,7 +136,8 @@ PMD Page Table Helpers +---------------------------+--------------------------------------------------+ | pmd_swp_clear_soft_dirty | Clears a soft dirty swapped PMD | +---------------------------+--------------------------------------------------+ -| pmd_mkinvalid | Invalidates a mapped PMD [1] | +| pmd_mkinvalid | Invalidates a present PMD; do not call for | +| | non-present PMD [1] | +---------------------------+--------------------------------------------------+ | pmd_set_huge | Creates a PMD huge mapping | +---------------------------+--------------------------------------------------+ @@ -192,7 +193,8 @@ PUD Page Table Helpers +---------------------------+--------------------------------------------------+ | pud_mkdevmap | Creates a ZONE_DEVICE mapped PUD | +---------------------------+--------------------------------------------------+ -| pud_mkinvalid | Invalidates a mapped PUD [1] | +| pud_mkinvalid | Invalidates a present PUD; do not call for | +| | non-present PUD [1] | +---------------------------+--------------------------------------------------+ | pud_set_huge | Creates a PUD huge mapping | +---------------------------+--------------------------------------------------+ diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c index 87aa76c73799..a3bce0895b7d 100644 --- a/arch/powerpc/mm/book3s64/pgtable.c +++ b/arch/powerpc/mm/book3s64/pgtable.c @@ -124,6 +124,7 @@ pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, { unsigned long old_pmd; + VM_WARN_ON_ONCE(!pmd_present(*pmdp)); old_pmd = pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, _PAGE_INVALID); flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE); return __pmd(old_pmd); diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 11e901286414..956300e3568a 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -1686,8 +1686,10 @@ static inline pmd_t pmdp_huge_clear_flush(struct vm_area_struct *vma, static inline pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long addr, pmd_t *pmdp) { - pmd_t pmd = __pmd(pmd_val(*pmdp) | _SEGMENT_ENTRY_INVALID); + pmd_t pmd; + VM_WARN_ON_ONCE(!pmd_present(*pmdp)); + pmd = __pmd(pmd_val(*pmdp) | _SEGMENT_ENTRY_INVALID); return pmdp_xchg_direct(vma->vm_mm, addr, pmdp, pmd); } diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c index 9a725547578e..946f33c1b032 100644 --- a/arch/sparc/mm/tlb.c +++ b/arch/sparc/mm/tlb.c @@ -245,6 +245,7 @@ pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, { pmd_t old, entry; + VM_WARN_ON_ONCE(!pmd_present(*pmdp)); entry = __pmd(pmd_val(*pmdp) & ~_PAGE_VALID); old = pmdp_establish(vma, address, pmdp, entry); flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE); diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 8525f2876fb4..77ee0012f849 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -615,6 +615,8 @@ int pmdp_clear_flush_young(struct vm_area_struct *vma, pmd_t pmdp_invalidate_ad(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { + VM_WARN_ON_ONCE(!pmd_present(*pmdp)); + /* * No flush is necessary. Once an invalid PTE is established, the PTE's * access and dirty bits cannot be updated. diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 9736e762184b..1b7f5950d603 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2108,32 +2108,11 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, return __split_huge_zero_page_pmd(vma, haddr, pmd); } - /* - * Up to this point the pmd is present and huge and userland has the - * whole access to the hugepage during the split (which happens in - * place). If we overwrite the pmd with the not-huge version pointing - * to the pte here (which of course we could if all CPUs were bug - * free), userland could trigger a small page size TLB miss on the - * small sized TLB while the hugepage TLB entry is still established in - * the huge TLB. Some CPU doesn't like that. - * See http://support.amd.com/TechDocs/41322_10h_Rev_Gd.pdf, Erratum - * 383 on page 105. Intel should be safe but is also warns that it's - * only safe if the permission and cache attributes of the two entries - * loaded in the two TLB is identical (which should be the case here). - * But it is generally safer to never allow small and huge TLB entries - * for the same virtual address to be loaded simultaneously. So instead - * of doing "pmd_populate(); flush_pmd_tlb_range();" we first mark the - * current pmd notpresent (atomically because here the pmd_trans_huge - * must remain set at all times on the pmd until the split is complete - * for this pmd), then we flush the SMP TLB and finally we write the - * non-huge version of the pmd entry with pmd_populate. - */ - old_pmd = pmdp_invalidate(vma, haddr, pmd); - - pmd_migration = is_pmd_migration_entry(old_pmd); + pmd_migration = is_pmd_migration_entry(*pmd); if (unlikely(pmd_migration)) { swp_entry_t entry; + old_pmd = *pmd; entry = pmd_to_swp_entry(old_pmd); page = pfn_swap_entry_to_page(entry); write = is_writable_migration_entry(entry); @@ -2144,6 +2123,30 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, soft_dirty = pmd_swp_soft_dirty(old_pmd); uffd_wp = pmd_swp_uffd_wp(old_pmd); } else { + /* + * Up to this point the pmd is present and huge and userland has + * the whole access to the hugepage during the split (which + * happens in place). If we overwrite the pmd with the not-huge + * version pointing to the pte here (which of course we could if + * all CPUs were bug free), userland could trigger a small page + * size TLB miss on the small sized TLB while the hugepage TLB + * entry is still established in the huge TLB. Some CPU doesn't + * like that. See + * http://support.amd.com/TechDocs/41322_10h_Rev_Gd.pdf, Erratum + * 383 on page 105. Intel should be safe but is also warns that + * it's only safe if the permission and cache attributes of the + * two entries loaded in the two TLB is identical (which should + * be the case here). But it is generally safer to never allow + * small and huge TLB entries for the same virtual address to be + * loaded simultaneously. So instead of doing "pmd_populate(); + * flush_pmd_tlb_range();" we first mark the current pmd + * notpresent (atomically because here the pmd_trans_huge must + * remain set at all times on the pmd until the split is + * complete for this pmd), then we flush the SMP TLB and finally + * we write the non-huge version of the pmd entry with + * pmd_populate. + */ + old_pmd = pmdp_invalidate(vma, haddr, pmd); page = pmd_page(old_pmd); if (pmd_dirty(old_pmd)) { dirty = true; diff --git a/mm/pgtable-generic.c b/mm/pgtable-generic.c index 90ab721a12a8..6a582cc07023 100644 --- a/mm/pgtable-generic.c +++ b/mm/pgtable-generic.c @@ -195,6 +195,7 @@ pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp) pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { + VM_WARN_ON_ONCE(!pmd_present(*pmdp)); pmd_t old = pmdp_establish(vma, address, pmdp, pmd_mkinvalid(*pmdp)); flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE); return old; @@ -205,6 +206,7 @@ pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t pmdp_invalidate_ad(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { + VM_WARN_ON_ONCE(!pmd_present(*pmdp)); return pmdp_invalidate(vma, address, pmdp); } #endif From 65bb86fbc8b55778374fb6b94791b0eb3b0b63b8 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 20 May 2024 22:30:40 -0400 Subject: [PATCH 55/87] scsi: core: Handle devices which return an unusually large VPD page count commit d09c05aa35909adb7d29f92f0cd79fdcd1338ef0 upstream. Peter Schneider reported that a system would no longer boot after updating to 6.8.4. Peter bisected the issue and identified commit b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") as being the culprit. Turns out the enclosure device in Peter's system reports a byteswapped page length for VPD page 0. It reports "02 00" as page length instead of "00 02". This causes us to attempt to access 516 bytes (page length + header) of information despite only 2 pages being present. Limit the page search scope to the size of our VPD buffer to guard against devices returning a larger page count than requested. Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") Cc: stable@vger.kernel.org Reported-by: Peter Schneider Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/ Tested-by: Peter Schneider Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/scsi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index e70ab8db3014..7b79cd435d7a 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -350,6 +350,13 @@ static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page) if (result < SCSI_VPD_HEADER_SIZE) return 0; + if (result > sizeof(vpd)) { + dev_warn_once(&sdev->sdev_gendev, + "%s: long VPD page 0 length: %d bytes\n", + __func__, result); + result = sizeof(vpd); + } + result -= SCSI_VPD_HEADER_SIZE; if (!memchr(&vpd[SCSI_VPD_HEADER_SIZE], page, result)) return 0; From 668408635951c6c8c96655c3651e4cf884ec8cb8 Mon Sep 17 00:00:00 2001 From: xu xin Date: Tue, 14 May 2024 20:11:02 +0800 Subject: [PATCH 56/87] net/ipv6: Fix route deleting failure when metric equals 0 commit bb487272380d120295e955ad8acfcbb281b57642 upstream. Problem ========= After commit 67f695134703 ("ipv6: Move setting default metric for routes"), we noticed that the logic of assigning the default value of fc_metirc changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT, rt) with a non-zero metric to add a route, then they may fail to delete a route with passing in a metric value of 0 to the kernel by ioctl(fd, SIOCDELRT, rt). But iproute can succeed in deleting it. As a reference, when using iproute tools by netlink to delete routes with a metric parameter equals 0, like the command as follows: ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0 the user can still succeed in deleting the route entry with the smallest metric. Root Reason =========== After commit 67f695134703 ("ipv6: Move setting default metric for routes"), When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config() will set a defalut value (1024) to cfg->fc_metric in kernel, and in ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric) continue; and the condition is true and skip the later procedure (deleting route) because cfg->fc_metric != rt->fib6_metric. But before that commit, cfg->fc_metric is still zero there, so the condition is false and it will do the following procedure (deleting). Solution ======== In order to keep a consistent behaviour across netlink() and ioctl(), we should allow to delete a route with a metric value of 0. So we only do the default setting of fc_metric in route adding. CC: stable@vger.kernel.org # 5.4+ Fixes: 67f695134703 ("ipv6: Move setting default metric for routes") Co-developed-by: Fan Yu Signed-off-by: Fan Yu Signed-off-by: xu xin Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- net/ipv6/route.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 887599d351b8..f60b11768a59 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -4435,7 +4435,7 @@ static void rtmsg_to_fib6_config(struct net *net, .fc_table = l3mdev_fib_table_by_index(net, rtmsg->rtmsg_ifindex) ? : RT6_TABLE_MAIN, .fc_ifindex = rtmsg->rtmsg_ifindex, - .fc_metric = rtmsg->rtmsg_metric ? : IP6_RT_PRIO_USER, + .fc_metric = rtmsg->rtmsg_metric, .fc_expires = rtmsg->rtmsg_info, .fc_dst_len = rtmsg->rtmsg_dst_len, .fc_src_len = rtmsg->rtmsg_src_len, @@ -4465,6 +4465,9 @@ int ipv6_route_ioctl(struct net *net, unsigned int cmd, struct in6_rtmsg *rtmsg) rtnl_lock(); switch (cmd) { case SIOCADDRT: + /* Only do the default setting of fc_metric in route adding */ + if (cfg.fc_metric == 0) + cfg.fc_metric = IP6_RT_PRIO_USER; err = ip6_route_add(&cfg, GFP_KERNEL, NULL); break; case SIOCDELRT: From ca71f204711ad24113e8b344dc5bb8b0385f5672 Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Mon, 8 Apr 2024 07:10:39 -0700 Subject: [PATCH 57/87] net/9p: fix uninit-value in p9_client_rpc() commit 25460d6f39024cc3b8241b14c7ccf0d6f11a736a upstream. Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag will not be properly initialized. However, trace_9p_client_res() ends up trying to print it out anyway before p9_client_rpc() finishes. Fix this issue by assigning default values to p9_fcall fields such as 'tag' and (just in case KMSAN unearths something new) 'id' during the tag allocation stage. Reported-and-tested-by: syzbot+ff14db38f56329ef68df@syzkaller.appspotmail.com Fixes: 348b59012e5c ("net/9p: Convert net/9p protocol dumps to tracepoints") Signed-off-by: Nikita Zhandarovich Reviewed-by: Christian Schoenebeck Cc: stable@vger.kernel.org Message-ID: <20240408141039.30428-1-n.zhandarovich@fintech.ru> Signed-off-by: Dominique Martinet Signed-off-by: Greg Kroah-Hartman --- net/9p/client.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/9p/client.c b/net/9p/client.c index 1d9a8a1f3f10..0fc2d706d9c2 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -231,6 +231,8 @@ static int p9_fcall_init(struct p9_client *c, struct p9_fcall *fc, if (!fc->sdata) return -ENOMEM; fc->capacity = alloc_msize; + fc->id = 0; + fc->tag = P9_NOTAG; return 0; } From 9ff078f5bad8990091f1639347de5e02636e9536 Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Tue, 28 May 2024 12:48:06 +0200 Subject: [PATCH 58/87] kmsan: do not wipe out origin when doing partial unpoisoning commit 2ef3cec44c60ae171b287db7fc2aa341586d65ba upstream. As noticed by Brian, KMSAN should not be zeroing the origin when unpoisoning parts of a four-byte uninitialized value, e.g.: char a[4]; kmsan_unpoison_memory(a, 1); This led to false negatives, as certain poisoned values could receive zero origins, preventing those values from being reported. To fix the problem, check that kmsan_internal_set_shadow_origin() writes zero origins only to slots which have zero shadow. Link: https://lkml.kernel.org/r/20240528104807.738758-1-glider@google.com Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core") Signed-off-by: Alexander Potapenko Reported-by: Brian Johannesmeyer Link: https://lore.kernel.org/lkml/20240524232804.1984355-1-bjohannesmeyer@gmail.com/T/ Reviewed-by: Marco Elver Tested-by: Brian Johannesmeyer Cc: Dmitry Vyukov Cc: Kees Cook Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/kmsan/core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/mm/kmsan/core.c b/mm/kmsan/core.c index 112dce135c7f..dff759f32bbb 100644 --- a/mm/kmsan/core.c +++ b/mm/kmsan/core.c @@ -258,8 +258,7 @@ void kmsan_internal_set_shadow_origin(void *addr, size_t size, int b, u32 origin, bool checked) { u64 address = (u64)addr; - void *shadow_start; - u32 *origin_start; + u32 *shadow_start, *origin_start; size_t pad = 0; KMSAN_WARN_ON(!kmsan_metadata_is_contiguous(addr, size)); @@ -287,8 +286,16 @@ void kmsan_internal_set_shadow_origin(void *addr, size_t size, int b, origin_start = (u32 *)kmsan_get_metadata((void *)address, KMSAN_META_ORIGIN); - for (int i = 0; i < size / KMSAN_ORIGIN_SIZE; i++) - origin_start[i] = origin; + /* + * If the new origin is non-zero, assume that the shadow byte is also non-zero, + * and unconditionally overwrite the old origin slot. + * If the new origin is zero, overwrite the old origin slot iff the + * corresponding shadow slot is zero. + */ + for (int i = 0; i < size / KMSAN_ORIGIN_SIZE; i++) { + if (origin || !shadow_start[i]) + origin_start[i] = origin; + } } struct page *kmsan_vmalloc_to_page_or_null(void *vaddr) From 82590ce3a0d0f26d06b0a70886ca2d444e64acbf Mon Sep 17 00:00:00 2001 From: Dhananjay Ugwekar Date: Mon, 27 May 2024 10:41:28 +0530 Subject: [PATCH 59/87] cpufreq: amd-pstate: Fix the inconsistency in max frequency units commit e4731baaf29438508197d3a8a6d4f5a8c51663f8 upstream. The nominal frequency in cpudata is maintained in MHz whereas all other frequencies are in KHz. This means we have to convert nominal frequency value to KHz before we do any interaction with other frequency values. In amd_pstate_set_boost(), this conversion from MHz to KHz is missed, fix that. Tested on a AMD Zen4 EPYC server Before: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151 409422 After: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151000 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151000 1799527 Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors") Signed-off-by: Dhananjay Ugwekar Acked-by: Mario Limonciello Acked-by: Gautham R. Shenoy Tested-by: Peter Jung Cc: 5.17+ # 5.17+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- drivers/cpufreq/amd-pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 90dcf26f0973..9f147e9eafb6 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -424,7 +424,7 @@ static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state) if (state) policy->cpuinfo.max_freq = cpudata->max_freq; else - policy->cpuinfo.max_freq = cpudata->nominal_freq; + policy->cpuinfo.max_freq = cpudata->nominal_freq * 1000; policy->max = policy->cpuinfo.max_freq; From 3ec82c9a153b203f0377367afe9bde4b488365f3 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Mon, 29 Apr 2024 16:01:18 +0300 Subject: [PATCH 60/87] intel_th: pci: Add Meteor Lake-S CPU support commit a4f813c3ec9d1c32bc402becd1f011b3904dd699 upstream. Add support for the Trace Hub in Meteor Lake-S CPU. Signed-off-by: Alexander Shishkin Reviewed-by: Andy Shevchenko Cc: stable@kernel.org Link: https://lore.kernel.org/r/20240429130119.1518073-15-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index 147d338c191e..648893f9e4b6 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -289,6 +289,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7e24), .driver_data = (kernel_ulong_t)&intel_th_2x, }, + { + /* Meteor Lake-S CPU */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xae24), + .driver_data = (kernel_ulong_t)&intel_th_2x, + }, { /* Raptor Lake-S */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7a26), From 14a339e7d7788276b039f1e08bcedc0f58f7a57c Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 30 Mar 2024 10:57:45 +0100 Subject: [PATCH 61/87] sparc64: Fix number of online CPUs commit 98937707fea8375e8acea0aaa0b68a956dd52719 upstream. Nick Bowler reported: When using newer kernels on my Ultra 60 with dual 450MHz UltraSPARC-II CPUs, I noticed that only CPU 0 comes up, while older kernels (including 4.7) are working fine with both CPUs. I bisected the failure to this commit: 9b2f753ec23710aa32c0d837d2499db92fe9115b is the first bad commit commit 9b2f753ec23710aa32c0d837d2499db92fe9115b Author: Atish Patra Date: Thu Sep 15 14:54:40 2016 -0600 sparc64: Fix cpu_possible_mask if nr_cpus is set This is a small change that reverts very easily on top of 5.18: there is just one trivial conflict. Once reverted, both CPUs work again. Maybe this is related to the fact that the CPUs on this system are numbered CPU0 and CPU2 (there is no CPU1)? The current code that adjust cpu_possible based on nr_cpu_ids do not take into account that CPU's may not come one after each other. Move the chech to the function that setup the cpu_possible mask so there is no need to adjust it later. Signed-off-by: Sam Ravnborg Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set") Reported-by: Nick Bowler Tested-by: Nick Bowler Link: https://lore.kernel.org/sparclinux/20201009161924.c8f031c079dd852941307870@gmx.de/ Link: https://lore.kernel.org/all/CADyTPEwt=ZNams+1bpMB1F9w_vUdPsGCt92DBQxxq_VtaLoTdw@mail.gmail.com/ Cc: stable@vger.kernel.org # v4.8+ Cc: Andreas Larsson Cc: David S. Miller Cc: Atish Patra Cc: Bob Picco Cc: Vijay Kumar Cc: David S. Miller Reviewed-by: Andreas Larsson Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-9-37201023ee2f@ravnborg.org Signed-off-by: Andreas Larsson Signed-off-by: Greg Kroah-Hartman --- arch/sparc/include/asm/smp_64.h | 2 -- arch/sparc/kernel/prom_64.c | 4 +++- arch/sparc/kernel/setup_64.c | 1 - arch/sparc/kernel/smp_64.c | 14 -------------- 4 files changed, 3 insertions(+), 18 deletions(-) diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h index e75783b6abc4..16ab904616a0 100644 --- a/arch/sparc/include/asm/smp_64.h +++ b/arch/sparc/include/asm/smp_64.h @@ -47,7 +47,6 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask); int hard_smp_processor_id(void); #define raw_smp_processor_id() (current_thread_info()->cpu) -void smp_fill_in_cpu_possible_map(void); void smp_fill_in_sib_core_maps(void); void cpu_play_dead(void); @@ -77,7 +76,6 @@ void __cpu_die(unsigned int cpu); #define smp_fill_in_sib_core_maps() do { } while (0) #define smp_fetch_global_regs() do { } while (0) #define smp_fetch_global_pmu() do { } while (0) -#define smp_fill_in_cpu_possible_map() do { } while (0) #define smp_init_cpu_poke() do { } while (0) #define scheduler_poke() do { } while (0) diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c index f883a50fa333..4eae633f7198 100644 --- a/arch/sparc/kernel/prom_64.c +++ b/arch/sparc/kernel/prom_64.c @@ -483,7 +483,9 @@ static void *record_one_cpu(struct device_node *dp, int cpuid, int arg) ncpus_probed++; #ifdef CONFIG_SMP set_cpu_present(cpuid, true); - set_cpu_possible(cpuid, true); + + if (num_possible_cpus() < nr_cpu_ids) + set_cpu_possible(cpuid, true); #endif return NULL; } diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index 48abee4eee29..9e6e7f983d14 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -684,7 +684,6 @@ void __init setup_arch(char **cmdline_p) paging_init(); init_sparc64_elf_hwcap(); - smp_fill_in_cpu_possible_map(); /* * Once the OF device tree and MDESC have been setup and nr_cpus has * been parsed, we know the list of possible cpus. Therefore we can diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index a55295d1b924..35e8a1e84da6 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1204,20 +1204,6 @@ void __init smp_setup_processor_id(void) xcall_deliver_impl = hypervisor_xcall_deliver; } -void __init smp_fill_in_cpu_possible_map(void) -{ - int possible_cpus = num_possible_cpus(); - int i; - - if (possible_cpus > nr_cpu_ids) - possible_cpus = nr_cpu_ids; - - for (i = 0; i < possible_cpus; i++) - set_cpu_possible(i, true); - for (; i < NR_CPUS; i++) - set_cpu_possible(i, false); -} - void smp_fill_in_sib_core_maps(void) { unsigned int i; From 04b4278245db1cb8a390f18dddbd47c3f70cc5a2 Mon Sep 17 00:00:00 2001 From: Frank van der Linden Date: Thu, 4 Apr 2024 16:25:14 +0000 Subject: [PATCH 62/87] mm/cma: drop incorrect alignment check in cma_init_reserved_mem commit b174f139bdc8aaaf72f5b67ad1bd512c4868a87e upstream. cma_init_reserved_mem uses IS_ALIGNED to check if the size represented by one bit in the cma allocation bitmask is aligned with CMA_MIN_ALIGNMENT_BYTES (pageblock size). However, this is too strict, as this will fail if order_per_bit > pageblock_order, which is a valid configuration. We could check IS_ALIGNED both ways, but since both numbers are powers of two, no check is needed at all. Link: https://lkml.kernel.org/r/20240404162515.527802-1-fvdl@google.com Fixes: de9e14eebf33 ("drivers: dma-contiguous: add initialization from device tree") Signed-off-by: Frank van der Linden Acked-by: David Hildenbrand Cc: Marek Szyprowski Cc: Muchun Song Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/cma.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/mm/cma.c b/mm/cma.c index 30b6ca30009b..01e9d0b2d875 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -186,10 +186,6 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size, if (!size || !memblock_is_region_reserved(base, size)) return -EINVAL; - /* alignment should be aligned with order_per_bit */ - if (!IS_ALIGNED(CMA_MIN_ALIGNMENT_PAGES, 1 << order_per_bit)) - return -EINVAL; - /* ensure minimal alignment required by mm core */ if (!IS_ALIGNED(base | size, CMA_MIN_ALIGNMENT_BYTES)) return -EINVAL; From c7071d30529fda79d7e008130f4a60a7a1c5484f Mon Sep 17 00:00:00 2001 From: Frank van der Linden Date: Thu, 4 Apr 2024 16:25:15 +0000 Subject: [PATCH 63/87] mm/hugetlb: pass correct order_per_bit to cma_declare_contiguous_nid commit 55d134a7b499c77e7cfd0ee41046f3c376e791e5 upstream. The hugetlb_cma code passes 0 in the order_per_bit argument to cma_declare_contiguous_nid (the alignment, computed using the page order, is correctly passed in). This causes a bit in the cma allocation bitmap to always represent a 4k page, making the bitmaps potentially very large, and slower. It would create bitmaps that would be pretty big. E.g. for a 4k page size on x86, hugetlb_cma=64G would mean a bitmap size of (64G / 4k) / 8 == 2M. With HUGETLB_PAGE_ORDER as order_per_bit, as intended, this would be (64G / 2M) / 8 == 4k. So, that's quite a difference. Also, this restricted the hugetlb_cma area to ((PAGE_SIZE << MAX_PAGE_ORDER) * 8) * PAGE_SIZE (e.g. 128G on x86) , since bitmap_alloc uses normal page allocation, and is thus restricted by MAX_PAGE_ORDER. Specifying anything about that would fail the CMA initialization. So, correctly pass in the order instead. Link: https://lkml.kernel.org/r/20240404162515.527802-2-fvdl@google.com Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Frank van der Linden Acked-by: Roman Gushchin Acked-by: David Hildenbrand Cc: Marek Szyprowski Cc: Muchun Song Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/hugetlb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 4361dcf70139..87a14638fad0 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -7669,9 +7669,9 @@ void __init hugetlb_cma_reserve(int order) * huge page demotion. */ res = cma_declare_contiguous_nid(0, size, 0, - PAGE_SIZE << HUGETLB_PAGE_ORDER, - 0, false, name, - &hugetlb_cma[nid], nid); + PAGE_SIZE << HUGETLB_PAGE_ORDER, + HUGETLB_PAGE_ORDER, false, name, + &hugetlb_cma[nid], nid); if (res) { pr_warn("hugetlb_cma: reservation failed: err %d, node %d", res, nid); From 6da1ffc4bc569404d5da18c9151d771d2dff4cef Mon Sep 17 00:00:00 2001 From: Judith Mendez Date: Wed, 17 Apr 2024 15:57:00 -0500 Subject: [PATCH 64/87] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin commit cae58516534e110f4a8558d48aa4435e15519121 upstream. On AM62x, the watchdog is pet before the valid window is open. Fix min_hw_heartbeat and accommodate a 2% + static offset safety margin. The static offset accounts for max hardware error. Remove the hack in the driver which shifts the open window boundary, since it is no longer necessary due to the fix mentioned above. cc: stable@vger.kernel.org Fixes: 5527483f8f7c ("watchdog: rti-wdt: attach to running watchdog during probe") Signed-off-by: Judith Mendez Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman --- drivers/watchdog/rti_wdt.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c index ea617c0f9747..fe27039f6f5a 100644 --- a/drivers/watchdog/rti_wdt.c +++ b/drivers/watchdog/rti_wdt.c @@ -52,6 +52,8 @@ #define DWDST BIT(1) +#define MAX_HW_ERROR 250 + static int heartbeat = DEFAULT_HEARTBEAT; /* @@ -90,7 +92,7 @@ static int rti_wdt_start(struct watchdog_device *wdd) * to be 50% or less than that; we obviouly want to configure the open * window as large as possible so we select the 50% option. */ - wdd->min_hw_heartbeat_ms = 500 * wdd->timeout; + wdd->min_hw_heartbeat_ms = 520 * wdd->timeout + MAX_HW_ERROR; /* Generate NMI when wdt expires */ writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL); @@ -124,31 +126,33 @@ static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize) * be petted during the open window; not too early or not too late. * The HW configuration options only allow for the open window size * to be 50% or less than that. + * To avoid any glitches, we accommodate 2% + max hardware error + * safety margin. */ switch (wsize) { case RTIWWDSIZE_50P: - /* 50% open window => 50% min heartbeat */ - wdd->min_hw_heartbeat_ms = 500 * heartbeat; + /* 50% open window => 52% min heartbeat */ + wdd->min_hw_heartbeat_ms = 520 * heartbeat + MAX_HW_ERROR; break; case RTIWWDSIZE_25P: - /* 25% open window => 75% min heartbeat */ - wdd->min_hw_heartbeat_ms = 750 * heartbeat; + /* 25% open window => 77% min heartbeat */ + wdd->min_hw_heartbeat_ms = 770 * heartbeat + MAX_HW_ERROR; break; case RTIWWDSIZE_12P5: - /* 12.5% open window => 87.5% min heartbeat */ - wdd->min_hw_heartbeat_ms = 875 * heartbeat; + /* 12.5% open window => 89.5% min heartbeat */ + wdd->min_hw_heartbeat_ms = 895 * heartbeat + MAX_HW_ERROR; break; case RTIWWDSIZE_6P25: - /* 6.5% open window => 93.5% min heartbeat */ - wdd->min_hw_heartbeat_ms = 935 * heartbeat; + /* 6.5% open window => 95.5% min heartbeat */ + wdd->min_hw_heartbeat_ms = 955 * heartbeat + MAX_HW_ERROR; break; case RTIWWDSIZE_3P125: - /* 3.125% open window => 96.9% min heartbeat */ - wdd->min_hw_heartbeat_ms = 969 * heartbeat; + /* 3.125% open window => 98.9% min heartbeat */ + wdd->min_hw_heartbeat_ms = 989 * heartbeat + MAX_HW_ERROR; break; default: @@ -221,14 +225,6 @@ static int rti_wdt_probe(struct platform_device *pdev) return -EINVAL; } - /* - * If watchdog is running at 32k clock, it is not accurate. - * Adjust frequency down in this case so that we don't pet - * the watchdog too often. - */ - if (wdt->freq < 32768) - wdt->freq = wdt->freq * 9 / 10; - pm_runtime_enable(dev); ret = pm_runtime_resume_and_get(dev); if (ret < 0) { From 33d9c814652b971461d1e30bead6792851c209e7 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Wed, 24 Apr 2024 15:03:34 +0100 Subject: [PATCH 65/87] kdb: Fix buffer overflow during tab-complete commit e9730744bf3af04cda23799029342aa3cddbc454 upstream. Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus explicit boundary checks to make sure we have enough space before we start moving characters around. Reported-by: Justin Stitt Closes: https://lore.kernel.org/all/CAFhGd8qESuuifuHsNjFPR-Va3P80bxrw+LqvC8deA8GziUJLpw@mail.gmail.com/ Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson Reviewed-by: Justin Stitt Tested-by: Justin Stitt Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-1-f236dbe9828d@linaro.org Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- kernel/debug/kdb/kdb_io.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 67d3c48a1522..e5159e2b455f 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -353,14 +353,19 @@ poll_again: kdb_printf(kdb_prompt_str); kdb_printf("%s", buffer); } else if (tab != 2 && count > 0) { - len_tmp = strlen(p_tmp); - strncpy(p_tmp+len_tmp, cp, lastchar-cp+1); - len_tmp = strlen(p_tmp); - strncpy(cp, p_tmp+len, len_tmp-len + 1); - len = len_tmp - len; - kdb_printf("%s", cp); - cp += len; - lastchar += len; + /* How many new characters do we want from tmpbuffer? */ + len_tmp = strlen(p_tmp) - len; + if (lastchar + len_tmp >= bufend) + len_tmp = bufend - lastchar; + + if (len_tmp) { + /* + 1 ensures the '\0' is memmove'd */ + memmove(cp+len_tmp, cp, (lastchar-cp) + 1); + memcpy(cp, p_tmp+len, len_tmp); + kdb_printf("%s", cp); + cp += len_tmp; + lastchar += len_tmp; + } } kdb_nextline = 1; /* reset output line number */ break; From b4e6a259f8d182ae106eb78317aff132e32bc445 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Wed, 24 Apr 2024 15:03:35 +0100 Subject: [PATCH 66/87] kdb: Use format-strings rather than '\0' injection in kdb_read() commit 09b35989421dfd5573f0b4683c7700a7483c71f9 upstream. Currently when kdb_read() needs to reposition the cursor it uses copy and paste code that works by injecting an '\0' at the cursor position before delivering a carriage-return and reprinting the line (which stops at the '\0'). Tidy up the code by hoisting the copy and paste code into an appropriately named function. Additionally let's replace the '\0' injection with a proper field width parameter so that the string will be abridged during formatting instead. Cc: stable@vger.kernel.org # Not a bug fix but it is needed for later bug fixes Tested-by: Justin Stitt Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-2-f236dbe9828d@linaro.org Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- kernel/debug/kdb/kdb_io.c | 55 ++++++++++++++++++++++++--------------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index e5159e2b455f..1f6201ae95b6 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -171,6 +171,33 @@ char kdb_getchar(void) unreachable(); } +/** + * kdb_position_cursor() - Place cursor in the correct horizontal position + * @prompt: Nil-terminated string containing the prompt string + * @buffer: Nil-terminated string containing the entire command line + * @cp: Cursor position, pointer the character in buffer where the cursor + * should be positioned. + * + * The cursor is positioned by sending a carriage-return and then printing + * the content of the line until we reach the correct cursor position. + * + * There is some additional fine detail here. + * + * Firstly, even though kdb_printf() will correctly format zero-width fields + * we want the second call to kdb_printf() to be conditional. That keeps things + * a little cleaner when LOGGING=1. + * + * Secondly, we can't combine everything into one call to kdb_printf() since + * that renders into a fixed length buffer and the combined print could result + * in unwanted truncation. + */ +static void kdb_position_cursor(char *prompt, char *buffer, char *cp) +{ + kdb_printf("\r%s", kdb_prompt_str); + if (cp > buffer) + kdb_printf("%.*s", (int)(cp - buffer), buffer); +} + /* * kdb_read * @@ -199,7 +226,6 @@ static char *kdb_read(char *buffer, size_t bufsize) * and null byte */ char *lastchar; char *p_tmp; - char tmp; static char tmpbuffer[CMD_BUFLEN]; int len = strlen(buffer); int len_tmp; @@ -236,12 +262,8 @@ poll_again: } *(--lastchar) = '\0'; --cp; - kdb_printf("\b%s \r", cp); - tmp = *cp; - *cp = '\0'; - kdb_printf(kdb_prompt_str); - kdb_printf("%s", buffer); - *cp = tmp; + kdb_printf("\b%s ", cp); + kdb_position_cursor(kdb_prompt_str, buffer, cp); } break; case 13: /* enter */ @@ -258,19 +280,14 @@ poll_again: memcpy(tmpbuffer, cp+1, lastchar - cp - 1); memcpy(cp, tmpbuffer, lastchar - cp - 1); *(--lastchar) = '\0'; - kdb_printf("%s \r", cp); - tmp = *cp; - *cp = '\0'; - kdb_printf(kdb_prompt_str); - kdb_printf("%s", buffer); - *cp = tmp; + kdb_printf("%s ", cp); + kdb_position_cursor(kdb_prompt_str, buffer, cp); } break; case 1: /* Home */ if (cp > buffer) { - kdb_printf("\r"); - kdb_printf(kdb_prompt_str); cp = buffer; + kdb_position_cursor(kdb_prompt_str, buffer, cp); } break; case 5: /* End */ @@ -376,13 +393,9 @@ poll_again: memcpy(cp+1, tmpbuffer, lastchar - cp); *++lastchar = '\0'; *cp = key; - kdb_printf("%s\r", cp); + kdb_printf("%s", cp); ++cp; - tmp = *cp; - *cp = '\0'; - kdb_printf(kdb_prompt_str); - kdb_printf("%s", buffer); - *cp = tmp; + kdb_position_cursor(kdb_prompt_str, buffer, cp); } else { *++lastchar = '\0'; *cp++ = key; From 0ec478e7a140acd10661747fcb99d696e41867ce Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Wed, 24 Apr 2024 15:03:36 +0100 Subject: [PATCH 67/87] kdb: Fix console handling when editing and tab-completing commands commit db2f9c7dc29114f531df4a425d0867d01e1f1e28 upstream. Currently, if the cursor position is not at the end of the command buffer and the user uses the Tab-complete functions, then the console does not leave the cursor in the correct position. For example consider the following buffer with the cursor positioned at the ^: md kdb_pro 10 ^ Pressing tab should result in: md kdb_prompt_str 10 ^ However this does not happen. Instead the cursor is placed at the end (after then 10) and further cursor movement redraws incorrectly. The same problem exists when we double-Tab but in a different part of the code. Fix this by sending a carriage return and then redisplaying the text to the left of the cursor. Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson Tested-by: Justin Stitt Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-3-f236dbe9828d@linaro.org Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- kernel/debug/kdb/kdb_io.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 1f6201ae95b6..0578a2aaaed2 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -369,6 +369,8 @@ poll_again: kdb_printf("\n"); kdb_printf(kdb_prompt_str); kdb_printf("%s", buffer); + if (cp != lastchar) + kdb_position_cursor(kdb_prompt_str, buffer, cp); } else if (tab != 2 && count > 0) { /* How many new characters do we want from tmpbuffer? */ len_tmp = strlen(p_tmp) - len; @@ -382,6 +384,9 @@ poll_again: kdb_printf("%s", cp); cp += len_tmp; lastchar += len_tmp; + if (cp != lastchar) + kdb_position_cursor(kdb_prompt_str, + buffer, cp); } } kdb_nextline = 1; /* reset output line number */ From 60e2a14a819e705868b77cb63445114d4cba7b0a Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Wed, 24 Apr 2024 15:03:37 +0100 Subject: [PATCH 68/87] kdb: Merge identical case statements in kdb_read() commit 6244917f377bf64719551b58592a02a0336a7439 upstream. The code that handles case 14 (down) and case 16 (up) has been copy and pasted despite being byte-for-byte identical. Combine them. Cc: stable@vger.kernel.org # Not a bug fix but it is needed for later bug fixes Reviewed-by: Douglas Anderson Tested-by: Justin Stitt Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-4-f236dbe9828d@linaro.org Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- kernel/debug/kdb/kdb_io.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 0578a2aaaed2..1d80f77d3767 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -303,6 +303,7 @@ poll_again: } break; case 14: /* Down */ + case 16: /* Up */ memset(tmpbuffer, ' ', strlen(kdb_prompt_str) + (lastchar-buffer)); *(tmpbuffer+strlen(kdb_prompt_str) + @@ -317,15 +318,6 @@ poll_again: ++cp; } break; - case 16: /* Up */ - memset(tmpbuffer, ' ', - strlen(kdb_prompt_str) + (lastchar-buffer)); - *(tmpbuffer+strlen(kdb_prompt_str) + - (lastchar-buffer)) = '\0'; - kdb_printf("\r%s\r", tmpbuffer); - *lastchar = (char)key; - *(lastchar+1) = '\0'; - return lastchar; case 9: /* Tab */ if (tab < 2) ++tab; From 10938be35e1e624d2760ad2802793262c3cde3c0 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Wed, 24 Apr 2024 15:03:38 +0100 Subject: [PATCH 69/87] kdb: Use format-specifiers rather than memset() for padding in kdb_read() commit c9b51ddb66b1d96e4d364c088da0f1dfb004c574 upstream. Currently when the current line should be removed from the display kdb_read() uses memset() to fill a temporary buffer with spaces. The problem is not that this could be trivially implemented using a format string rather than open coding it. The real problem is that it is possible, on systems with a long kdb_prompt_str, to write past the end of the tmpbuffer. Happily, as mentioned above, this can be trivially implemented using a format string. Make it so! Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson Tested-by: Justin Stitt Link: https://lore.kernel.org/r/20240424-kgdb_read_refactor-v3-5-f236dbe9828d@linaro.org Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- kernel/debug/kdb/kdb_io.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 1d80f77d3767..b1f79d5a5a60 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -304,11 +304,9 @@ poll_again: break; case 14: /* Down */ case 16: /* Up */ - memset(tmpbuffer, ' ', - strlen(kdb_prompt_str) + (lastchar-buffer)); - *(tmpbuffer+strlen(kdb_prompt_str) + - (lastchar-buffer)) = '\0'; - kdb_printf("\r%s\r", tmpbuffer); + kdb_printf("\r%*c\r", + (int)(strlen(kdb_prompt_str) + (lastchar - buffer)), + ' '); *lastchar = (char)key; *(lastchar+1) = '\0'; return lastchar; From 81dd3c82a456b0015461754be7cb2693991421b4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 May 2024 11:43:53 +0000 Subject: [PATCH 70/87] net: fix __dst_negative_advice() race commit 92f1655aa2b2294d0b49925f3b875a634bd3b59e upstream. __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets. Fixes: a87cb3e48ee8 ("net: Facility to report route quality of connected sockets") Reported-by: Clement Lecigne Diagnosed-by: Clement Lecigne Signed-off-by: Eric Dumazet Cc: Tom Herbert Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com Signed-off-by: Jakub Kicinski [Lee: Stable backport] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman --- include/net/dst_ops.h | 2 +- include/net/sock.h | 13 +++---------- net/ipv4/route.c | 22 ++++++++-------------- net/ipv6/route.c | 29 +++++++++++++++-------------- net/xfrm/xfrm_policy.c | 11 +++-------- 5 files changed, 30 insertions(+), 47 deletions(-) diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 632086b2f644..3ae2fda29507 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -24,7 +24,7 @@ struct dst_ops { void (*destroy)(struct dst_entry *); void (*ifdown)(struct dst_entry *, struct net_device *dev, int how); - struct dst_entry * (*negative_advice)(struct dst_entry *); + void (*negative_advice)(struct sock *sk, struct dst_entry *); void (*link_failure)(struct sk_buff *); void (*update_pmtu)(struct dst_entry *dst, struct sock *sk, struct sk_buff *skb, u32 mtu, diff --git a/include/net/sock.h b/include/net/sock.h index 77298c74822a..9dab48207874 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2212,17 +2212,10 @@ sk_dst_get(struct sock *sk) static inline void __dst_negative_advice(struct sock *sk) { - struct dst_entry *ndst, *dst = __sk_dst_get(sk); + struct dst_entry *dst = __sk_dst_get(sk); - if (dst && dst->ops->negative_advice) { - ndst = dst->ops->negative_advice(dst); - - if (ndst != dst) { - rcu_assign_pointer(sk->sk_dst_cache, ndst); - sk_tx_queue_clear(sk); - WRITE_ONCE(sk->sk_dst_pending_confirm, 0); - } - } + if (dst && dst->ops->negative_advice) + dst->ops->negative_advice(sk, dst); } static inline void dst_negative_advice(struct sock *sk) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 6c0f1e347b85..fcbacd39febe 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -132,7 +132,8 @@ struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ipv4_default_advmss(const struct dst_entry *dst); INDIRECT_CALLABLE_SCOPE unsigned int ipv4_mtu(const struct dst_entry *dst); -static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst); +static void ipv4_negative_advice(struct sock *sk, + struct dst_entry *dst); static void ipv4_link_failure(struct sk_buff *skb); static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk, struct sk_buff *skb, u32 mtu, @@ -837,22 +838,15 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf __ip_do_redirect(rt, skb, &fl4, true); } -static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst) +static void ipv4_negative_advice(struct sock *sk, + struct dst_entry *dst) { struct rtable *rt = (struct rtable *)dst; - struct dst_entry *ret = dst; - if (rt) { - if (dst->obsolete > 0) { - ip_rt_put(rt); - ret = NULL; - } else if ((rt->rt_flags & RTCF_REDIRECTED) || - rt->dst.expires) { - ip_rt_put(rt); - ret = NULL; - } - } - return ret; + if ((dst->obsolete > 0) || + (rt->rt_flags & RTCF_REDIRECTED) || + rt->dst.expires) + sk_dst_reset(sk); } /* diff --git a/net/ipv6/route.c b/net/ipv6/route.c index f60b11768a59..258e87055836 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -87,7 +87,8 @@ struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ip6_default_advmss(const struct dst_entry *dst); INDIRECT_CALLABLE_SCOPE unsigned int ip6_mtu(const struct dst_entry *dst); -static struct dst_entry *ip6_negative_advice(struct dst_entry *); +static void ip6_negative_advice(struct sock *sk, + struct dst_entry *dst); static void ip6_dst_destroy(struct dst_entry *); static void ip6_dst_ifdown(struct dst_entry *, struct net_device *dev, int how); @@ -2762,24 +2763,24 @@ INDIRECT_CALLABLE_SCOPE struct dst_entry *ip6_dst_check(struct dst_entry *dst, } EXPORT_INDIRECT_CALLABLE(ip6_dst_check); -static struct dst_entry *ip6_negative_advice(struct dst_entry *dst) +static void ip6_negative_advice(struct sock *sk, + struct dst_entry *dst) { struct rt6_info *rt = (struct rt6_info *) dst; - if (rt) { - if (rt->rt6i_flags & RTF_CACHE) { - rcu_read_lock(); - if (rt6_check_expired(rt)) { - rt6_remove_exception_rt(rt); - dst = NULL; - } - rcu_read_unlock(); - } else { - dst_release(dst); - dst = NULL; + if (rt->rt6i_flags & RTF_CACHE) { + rcu_read_lock(); + if (rt6_check_expired(rt)) { + /* counteract the dst_release() in sk_dst_reset() */ + dst_hold(dst); + sk_dst_reset(sk); + + rt6_remove_exception_rt(rt); } + rcu_read_unlock(); + return; } - return dst; + sk_dst_reset(sk); } static void ip6_link_failure(struct sk_buff *skb) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index e47c670c7e2c..5fddde2d5bc4 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -3772,15 +3772,10 @@ static void xfrm_link_failure(struct sk_buff *skb) /* Impossible. Such dst must be popped before reaches point of failure. */ } -static struct dst_entry *xfrm_negative_advice(struct dst_entry *dst) +static void xfrm_negative_advice(struct sock *sk, struct dst_entry *dst) { - if (dst) { - if (dst->obsolete) { - dst_release(dst); - dst = NULL; - } - } - return dst; + if (dst->obsolete) + sk_dst_reset(sk); } static void xfrm_init_pmtu(struct xfrm_dst **bundle, int nr) From d47445b041b0b6c84ec14994bc04b7e4c49527c0 Mon Sep 17 00:00:00 2001 From: Mike Gilbert Date: Wed, 6 Mar 2024 12:11:47 -0500 Subject: [PATCH 71/87] sparc: move struct termio to asm/termios.h commit c32d18e7942d7589b62e301eb426b32623366565 upstream. Every other arch declares struct termio in asm/termios.h, so make sparc match them. Resolves a build failure in the PPP software package, which includes both bits/ioctl-types.h via sys/ioctl.h (glibc) and asm/termbits.h. Closes: https://bugs.gentoo.org/918992 Signed-off-by: Mike Gilbert Cc: stable@vger.kernel.org Reviewed-by: Andreas Larsson Tested-by: Andreas Larsson Link: https://lore.kernel.org/r/20240306171149.3843481-1-floppym@gentoo.org Signed-off-by: Andreas Larsson Signed-off-by: Greg Kroah-Hartman --- arch/sparc/include/uapi/asm/termbits.h | 10 ---------- arch/sparc/include/uapi/asm/termios.h | 9 +++++++++ 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/sparc/include/uapi/asm/termbits.h b/arch/sparc/include/uapi/asm/termbits.h index 4321322701fc..0da2b1adc0f5 100644 --- a/arch/sparc/include/uapi/asm/termbits.h +++ b/arch/sparc/include/uapi/asm/termbits.h @@ -10,16 +10,6 @@ typedef unsigned int tcflag_t; typedef unsigned long tcflag_t; #endif -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - #define NCCS 17 struct termios { tcflag_t c_iflag; /* input mode flags */ diff --git a/arch/sparc/include/uapi/asm/termios.h b/arch/sparc/include/uapi/asm/termios.h index ee86f4093d83..cceb32260881 100644 --- a/arch/sparc/include/uapi/asm/termios.h +++ b/arch/sparc/include/uapi/asm/termios.h @@ -40,5 +40,14 @@ struct winsize { unsigned short ws_ypixel; }; +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; #endif /* _UAPI_SPARC_TERMIOS_H */ From 16a392f66a5ae5290b7acf952f28a7565a7d12f2 Mon Sep 17 00:00:00 2001 From: Baokun Li Date: Tue, 19 Mar 2024 19:33:23 +0800 Subject: [PATCH 72/87] ext4: set type of ac_groups_linear_remaining to __u32 to avoid overflow commit 9a9f3a9842927e4af7ca10c19c94dad83bebd713 upstream. Now ac_groups_linear_remaining is of type __u16 and s_mb_max_linear_groups is of type unsigned int, so an overflow occurs when setting a value above 65535 through the mb_max_linear_groups sysfs interface. Therefore, the type of ac_groups_linear_remaining is set to __u32 to avoid overflow. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Zhang Yi Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20240319113325.3110393-8-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/mballoc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index 00b3898df4a7..538703499d08 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -180,8 +180,8 @@ struct ext4_allocation_context { __u32 ac_groups_considered; __u32 ac_flags; /* allocation hints */ + __u32 ac_groups_linear_remaining; __u16 ac_groups_scanned; - __u16 ac_groups_linear_remaining; __u16 ac_found; __u16 ac_tail; __u16 ac_buddy; From e941b712e758f615d311946bf98216e79145ccd9 Mon Sep 17 00:00:00 2001 From: Baokun Li Date: Sat, 4 May 2024 15:55:25 +0800 Subject: [PATCH 73/87] ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find() commit 0c0b4a49d3e7f49690a6827a41faeffad5df7e21 upstream. Syzbot reports a warning as follows: ============================================ WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290 Modules linked in: CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7 RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419 Call Trace: ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375 generic_shutdown_super+0x136/0x2d0 fs/super.c:641 kill_block_super+0x44/0x90 fs/super.c:1675 ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327 [...] ============================================ This is because when finding an entry in ext4_xattr_block_cache_find(), if ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown in the __entry_find(), won't be put away, and eventually trigger the above issue in mb_cache_destroy() due to reference count leakage. So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix. Reported-by: syzbot+dd43bd0f7474512edc47@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dd43bd0f7474512edc47 Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20240504075526.2254349-2-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/xattr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index eaed9fd2f890..28d00ed833db 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -3076,8 +3076,10 @@ ext4_xattr_block_cache_find(struct inode *inode, bh = ext4_sb_bread(inode->i_sb, ce->e_value, REQ_PRIO); if (IS_ERR(bh)) { - if (PTR_ERR(bh) == -ENOMEM) + if (PTR_ERR(bh) == -ENOMEM) { + mb_cache_entry_put(ea_block_cache, ce); return NULL; + } bh = NULL; EXT4_ERROR_INODE(inode, "block %lu read error", (unsigned long)ce->e_value); From bca17801fb9506347cfcd0b69df110736ad4ff85 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 15 May 2024 14:53:25 +0200 Subject: [PATCH 74/87] parisc: Define HAVE_ARCH_HUGETLB_UNMAPPED_AREA commit d4a599910193b85f76c100e30d8551c8794f8c2a upstream. Define the HAVE_ARCH_HUGETLB_UNMAPPED_AREA macro like other platforms do in their page.h files to avoid this compile warning: arch/parisc/mm/hugetlbpage.c:25:1: warning: no previous prototype for 'hugetlb_get_unmapped_area' [-Wmissing-prototypes] Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # 6.0+ Reported-by: John David Anglin Tested-by: John David Anglin Signed-off-by: Greg Kroah-Hartman --- arch/parisc/include/asm/page.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h index 6faaaa3ebe9b..e93baddf3a2e 100644 --- a/arch/parisc/include/asm/page.h +++ b/arch/parisc/include/asm/page.h @@ -16,6 +16,7 @@ #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA #ifndef __ASSEMBLY__ From ff19ea00a50f958826624d9ac9dc332d162b5bfe Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 27 Apr 2024 19:43:51 +0200 Subject: [PATCH 75/87] parisc: Define sigset_t in parisc uapi header commit 487fa28fa8b60417642ac58e8beda6e2509d18f9 upstream. The util-linux debian package fails to build on parisc, because sigset_t isn't defined in asm/signal.h when included from userspace. Move the sigset_t type from internal header to the uapi header to fix the build. Link: https://buildd.debian.org/status/fetch.php?pkg=util-linux&arch=hppa&ver=2.40-7&stamp=1714163443&raw=0 Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman --- arch/parisc/include/asm/signal.h | 12 ------------ arch/parisc/include/uapi/asm/signal.h | 10 ++++++++++ 2 files changed, 10 insertions(+), 12 deletions(-) diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index 715c96ba2ec8..e84883c6b4c7 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -4,23 +4,11 @@ #include -#define _NSIG 64 -/* bits-per-word, where word apparently means 'long' not 'int' */ -#define _NSIG_BPW BITS_PER_LONG -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - # ifndef __ASSEMBLY__ /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - /* next_signal() assumes this is a long - no choice */ - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - #include #endif /* !__ASSEMBLY */ diff --git a/arch/parisc/include/uapi/asm/signal.h b/arch/parisc/include/uapi/asm/signal.h index 8e4895c5ea5d..40d7a574c5dd 100644 --- a/arch/parisc/include/uapi/asm/signal.h +++ b/arch/parisc/include/uapi/asm/signal.h @@ -57,10 +57,20 @@ #include +#define _NSIG 64 +#define _NSIG_BPW (sizeof(unsigned long) * 8) +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + # ifndef __ASSEMBLY__ # include +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + /* Avoid too many header ordering problems. */ struct siginfo; From 8c5f5911c1b13170d3404eb992c6a0deaa8d81ad Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Mon, 13 May 2024 14:49:13 +0200 Subject: [PATCH 76/87] s390/ap: Fix crash in AP internal function modify_bitmap() commit d4f9d5a99a3fd1b1c691b7a1a6f8f3f25f4116c9 upstream. A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow. Reported-by: Marc Hartmayer Signed-off-by: Harald Freudenberger Tested-by: Marc Hartmayer Reviewed-by: Holger Dengler Cc: Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman --- drivers/s390/crypto/ap_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 4c0f9fe1ba77..c692b55dd116 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1088,7 +1088,7 @@ static int hex2bitmap(const char *str, unsigned long *bitmap, int bits) */ static int modify_bitmap(const char *str, unsigned long *bitmap, int bits) { - int a, i, z; + unsigned long a, i, z; char *np, sign; /* bits needs to be a multiple of 8 */ From 1d39dcff47943ddcb2cf2c50c490aa4842182197 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Fri, 3 May 2024 11:31:42 +0200 Subject: [PATCH 77/87] s390/cpacf: Split and rework cpacf query functions commit 830999bd7e72f4128b9dfa37090d9fa8120ce323 upstream. Rework the cpacf query functions to use the correct RRE or RRF instruction formats and set register fields within instructions correctly. Fixes: 1afd43e0fbba ("s390/crypto: allow to query all known cpacf functions") Reported-by: Nina Schoetterl-Glausch Suggested-by: Heiko Carstens Suggested-by: Juergen Christ Suggested-by: Holger Dengler Signed-off-by: Harald Freudenberger Reviewed-by: Holger Dengler Reviewed-by: Juergen Christ Cc: Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman --- arch/s390/include/asm/cpacf.h | 101 +++++++++++++++++++++++++++------- 1 file changed, 81 insertions(+), 20 deletions(-) diff --git a/arch/s390/include/asm/cpacf.h b/arch/s390/include/asm/cpacf.h index 646b12981f20..fa31f71cf574 100644 --- a/arch/s390/include/asm/cpacf.h +++ b/arch/s390/include/asm/cpacf.h @@ -161,28 +161,79 @@ typedef struct { unsigned char bytes[16]; } cpacf_mask_t; -/** - * cpacf_query() - check if a specific CPACF function is available - * @opcode: the opcode of the crypto instruction - * @func: the function code to test for - * - * Executes the query function for the given crypto instruction @opcode - * and checks if @func is available - * - * Returns 1 if @func is available for @opcode, 0 otherwise - */ -static __always_inline void __cpacf_query(unsigned int opcode, cpacf_mask_t *mask) +static __always_inline void __cpacf_query_rre(u32 opc, u8 r1, u8 r2, + cpacf_mask_t *mask) { asm volatile( - " lghi 0,0\n" /* query function */ - " lgr 1,%[mask]\n" - " spm 0\n" /* pckmo doesn't change the cc */ - /* Parameter regs are ignored, but must be nonzero and unique */ - "0: .insn rrf,%[opc] << 16,2,4,6,0\n" - " brc 1,0b\n" /* handle partial completion */ - : "=m" (*mask) - : [mask] "d" ((unsigned long)mask), [opc] "i" (opcode) - : "cc", "0", "1"); + " la %%r1,%[mask]\n" + " xgr %%r0,%%r0\n" + " .insn rre,%[opc] << 16,%[r1],%[r2]\n" + : [mask] "=R" (*mask) + : [opc] "i" (opc), + [r1] "i" (r1), [r2] "i" (r2) + : "cc", "r0", "r1"); +} + +static __always_inline void __cpacf_query_rrf(u32 opc, + u8 r1, u8 r2, u8 r3, u8 m4, + cpacf_mask_t *mask) +{ + asm volatile( + " la %%r1,%[mask]\n" + " xgr %%r0,%%r0\n" + " .insn rrf,%[opc] << 16,%[r1],%[r2],%[r3],%[m4]\n" + : [mask] "=R" (*mask) + : [opc] "i" (opc), [r1] "i" (r1), [r2] "i" (r2), + [r3] "i" (r3), [m4] "i" (m4) + : "cc", "r0", "r1"); +} + +static __always_inline void __cpacf_query(unsigned int opcode, + cpacf_mask_t *mask) +{ + switch (opcode) { + case CPACF_KDSA: + __cpacf_query_rre(CPACF_KDSA, 0, 2, mask); + break; + case CPACF_KIMD: + __cpacf_query_rre(CPACF_KIMD, 0, 2, mask); + break; + case CPACF_KLMD: + __cpacf_query_rre(CPACF_KLMD, 0, 2, mask); + break; + case CPACF_KM: + __cpacf_query_rre(CPACF_KM, 2, 4, mask); + break; + case CPACF_KMA: + __cpacf_query_rrf(CPACF_KMA, 2, 4, 6, 0, mask); + break; + case CPACF_KMAC: + __cpacf_query_rre(CPACF_KMAC, 0, 2, mask); + break; + case CPACF_KMC: + __cpacf_query_rre(CPACF_KMC, 2, 4, mask); + break; + case CPACF_KMCTR: + __cpacf_query_rrf(CPACF_KMCTR, 2, 4, 6, 0, mask); + break; + case CPACF_KMF: + __cpacf_query_rre(CPACF_KMF, 2, 4, mask); + break; + case CPACF_KMO: + __cpacf_query_rre(CPACF_KMO, 2, 4, mask); + break; + case CPACF_PCC: + __cpacf_query_rre(CPACF_PCC, 0, 0, mask); + break; + case CPACF_PCKMO: + __cpacf_query_rre(CPACF_PCKMO, 0, 0, mask); + break; + case CPACF_PRNO: + __cpacf_query_rre(CPACF_PRNO, 2, 4, mask); + break; + default: + BUG(); + } } static __always_inline int __cpacf_check_opcode(unsigned int opcode) @@ -210,6 +261,16 @@ static __always_inline int __cpacf_check_opcode(unsigned int opcode) } } +/** + * cpacf_query() - check if a specific CPACF function is available + * @opcode: the opcode of the crypto instruction + * @func: the function code to test for + * + * Executes the query function for the given crypto instruction @opcode + * and checks if @func is available + * + * Returns 1 if @func is available for @opcode, 0 otherwise + */ static __always_inline int cpacf_query(unsigned int opcode, cpacf_mask_t *mask) { if (__cpacf_check_opcode(opcode)) { From 07c8050f8c483b6db4f8ae9efdfe3a721c463c6b Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Tue, 14 May 2024 10:09:32 +0200 Subject: [PATCH 78/87] s390/cpacf: Make use of invalid opcode produce a link error commit 32e8bd6423fc127d2b37bdcf804fd76af3bbec79 upstream. Instead of calling BUG() at runtime introduce and use a prototype for a non-existing function to produce a link error during compile when a not supported opcode is used with the __cpacf_query() or __cpacf_check_opcode() inline functions. Suggested-by: Heiko Carstens Signed-off-by: Harald Freudenberger Reviewed-by: Holger Dengler Reviewed-by: Juergen Christ Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman --- arch/s390/include/asm/cpacf.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/s390/include/asm/cpacf.h b/arch/s390/include/asm/cpacf.h index fa31f71cf574..0f6ff2008a15 100644 --- a/arch/s390/include/asm/cpacf.h +++ b/arch/s390/include/asm/cpacf.h @@ -161,6 +161,13 @@ typedef struct { unsigned char bytes[16]; } cpacf_mask_t; +/* + * Prototype for a not existing function to produce a link + * error if __cpacf_query() or __cpacf_check_opcode() is used + * with an invalid compile time const opcode. + */ +void __cpacf_bad_opcode(void); + static __always_inline void __cpacf_query_rre(u32 opc, u8 r1, u8 r2, cpacf_mask_t *mask) { @@ -232,7 +239,7 @@ static __always_inline void __cpacf_query(unsigned int opcode, __cpacf_query_rre(CPACF_PRNO, 2, 4, mask); break; default: - BUG(); + __cpacf_bad_opcode(); } } @@ -257,7 +264,8 @@ static __always_inline int __cpacf_check_opcode(unsigned int opcode) case CPACF_KMA: return test_facility(146); /* check for MSA8 */ default: - BUG(); + __cpacf_bad_opcode(); + return 0; } } From 4e060b308df284b499699a24dcf8f17219014ac4 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 6 May 2024 12:40:09 -0400 Subject: [PATCH 79/87] i3c: master: svc: fix invalidate IBI type and miss call client IBI handler commit 38baed9b8600008e5d7bc8cb9ceccc1af3dd54b7 upstream. In an In-Band Interrupt (IBI) handle, the code logic is as follows: 1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO, master->regs + SVC_I3C_MCTRL); 2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val, SVC_I3C_MSTATUS_IBIWON(val), 0, 1000); ... 3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status); ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status); SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return immediately, and the I3C controller has not sent out the 9th SCL yet. Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type occurrence and missing call I3C client driver's IBI handler. A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs during the controller send start frame in svc_i3c_master_xfer(). Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI to fix this issue. Cc: stable@vger.kernel.org Fixes: 5e5e3c92e748 ("i3c: master: svc: fix wrong data return when IBI happen during start frame") Signed-off-by: Frank Li Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20240506164009.21375-3-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman --- drivers/i3c/master/svc-i3c-master.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index f30d457e9119..e71c90e5ac60 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -397,6 +397,19 @@ static void svc_i3c_master_ibi_work(struct work_struct *work) int ret; mutex_lock(&master->lock); + /* + * IBIWON may be set before SVC_I3C_MCTRL_REQUEST_AUTO_IBI, causing + * readl_relaxed_poll_timeout() to return immediately. Consequently, + * ibitype will be 0 since it was last updated only after the 8th SCL + * cycle, leading to missed client IBI handlers. + * + * A typical scenario is when IBIWON occurs and bus arbitration is lost + * at svc_i3c_master_priv_xfers(). + * + * Clear SVC_I3C_MINT_IBIWON before sending SVC_I3C_MCTRL_REQUEST_AUTO_IBI. + */ + writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS); + /* Acknowledge the incoming interrupt with the AUTOIBI mechanism */ writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO, @@ -411,9 +424,6 @@ static void svc_i3c_master_ibi_work(struct work_struct *work) goto reenable_ibis; } - /* Clear the interrupt status */ - writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS); - status = readl(master->regs + SVC_I3C_MSTATUS); ibitype = SVC_I3C_MSTATUS_IBITYPE(status); ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status); From 728b663f5ec8b30daf956e83695b26b7de32bde7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Mon, 27 May 2024 16:22:35 +0300 Subject: [PATCH 80/87] EDAC/igen6: Convert PCIBIOS_* return codes to errnos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit f8367a74aebf88dc8b58a0db6a6c90b4cb8fc9d3 upstream. errcmd_enable_error_reporting() uses pci_{read,write}_config_word() that return PCIBIOS_* codes. The return code is then returned all the way into the probe function igen6_probe() that returns it as is. The probe functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from errcmd_enable_error_reporting(). Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Qiuxu Zhuo Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/edac/igen6_edac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/edac/igen6_edac.c b/drivers/edac/igen6_edac.c index 8ec70da8d84f..c46880a934da 100644 --- a/drivers/edac/igen6_edac.c +++ b/drivers/edac/igen6_edac.c @@ -627,7 +627,7 @@ static int errcmd_enable_error_reporting(bool enable) rc = pci_read_config_word(imc->pdev, ERRCMD_OFFSET, &errcmd); if (rc) - return rc; + return pcibios_err_to_errno(rc); if (enable) errcmd |= ERRCMD_CE | ERRSTS_UE; @@ -636,7 +636,7 @@ static int errcmd_enable_error_reporting(bool enable) rc = pci_write_config_word(imc->pdev, ERRCMD_OFFSET, errcmd); if (rc) - return rc; + return pcibios_err_to_errno(rc); return 0; } From a54419e60eb342eb9194cb2e645773dc54cb6f38 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Fri, 10 May 2024 23:24:04 +0300 Subject: [PATCH 81/87] nfs: fix undefined behavior in nfs_block_bits() commit 3c0a2e0b0ae661457c8505fecc7be5501aa7a715 upstream. Shifting *signed int* typed constant 1 left by 31 bits causes undefined behavior. Specify the correct *unsigned long* type by using 1UL instead. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov Reviewed-by: Benjamin Coddington Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman --- fs/nfs/internal.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index b3b801e7c4bc..d921d7b7bec6 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -695,9 +695,9 @@ unsigned long nfs_block_bits(unsigned long bsize, unsigned char *nrbitsp) if ((bsize & (bsize - 1)) || nrbitsp) { unsigned char nrbits; - for (nrbits = 31; nrbits && !(bsize & (1 << nrbits)); nrbits--) + for (nrbits = 31; nrbits && !(bsize & (1UL << nrbits)); nrbits--) ; - bsize = 1 << nrbits; + bsize = 1UL << nrbits; if (nrbitsp) *nrbitsp = nrbits; } From e601937b5bafc4304e5c1d5779ebb570a8e4af66 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Thu, 25 Apr 2024 16:24:29 -0400 Subject: [PATCH 82/87] NFS: Fix READ_PLUS when server doesn't support OP_READ_PLUS commit f06d1b10cb016d5aaecdb1804fefca025387bd10 upstream. Olga showed me a case where the client was sending multiple READ_PLUS calls to the server in parallel, and the server replied NFS4ERR_OPNOTSUPP to each. The client would fall back to READ for the first reply, but fail to retry the other calls. I fix this by removing the test for NFS_CAP_READ_PLUS in nfs4_read_plus_not_supported(). This allows us to reschedule any READ_PLUS call that has a NFS4ERR_OPNOTSUPP return value, even after the capability has been cleared. Reported-by: Olga Kornievskaia Fixes: c567552612ec ("NFS: Add READ_PLUS data segment support") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Anna Schumaker Reviewed-by: Benjamin Coddington Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 7cc74f7451d6..bda3050817c9 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5441,7 +5441,7 @@ static bool nfs4_read_plus_not_supported(struct rpc_task *task, struct rpc_message *msg = &task->tk_msg; if (msg->rpc_proc == &nfs4_procedures[NFSPROC4_CLNT_READ_PLUS] && - server->caps & NFS_CAP_READ_PLUS && task->tk_status == -ENOTSUPP) { + task->tk_status == -ENOTSUPP) { server->caps &= ~NFS_CAP_READ_PLUS; msg->rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_READ]; rpc_restart_call_prepare(task); From 1ff2bd566fbcefcb892be85c493bdb92b911c428 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Fri, 24 May 2024 13:58:11 -0700 Subject: [PATCH 83/87] btrfs: fix crash on racing fsync and size-extending write into prealloc commit 9d274c19a71b3a276949933859610721a453946b upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana Signed-off-by: Omar Sandoval Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/tree-log.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 7c33b28c02ae..b7a5bf88193f 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -4845,18 +4845,23 @@ static int btrfs_log_prealloc_extents(struct btrfs_trans_handle *trans, path->slots[0]++; continue; } - if (!dropped_extents) { - /* - * Avoid logging extent items logged in past fsync calls - * and leading to duplicate keys in the log tree. - */ + /* + * Avoid overlapping items in the log tree. The first time we + * get here, get rid of everything from a past fsync. After + * that, if the current extent starts before the end of the last + * extent we copied, truncate the last one. This can happen if + * an ordered extent completion modifies the subvolume tree + * while btrfs_next_leaf() has the tree unlocked. + */ + if (!dropped_extents || key.offset < truncate_offset) { ret = truncate_inode_items(trans, root->log_root, inode, - truncate_offset, + min(key.offset, truncate_offset), BTRFS_EXTENT_DATA_KEY); if (ret) goto out; dropped_extents = true; } + truncate_offset = btrfs_file_extent_end(path); if (ins_nr == 0) start_slot = slot; ins_nr++; From 3174d8b7c9366e4db879a824fd1ae767b7c84e4d Mon Sep 17 00:00:00 2001 From: Puranjay Mohan Date: Mon, 13 May 2024 10:02:48 +0000 Subject: [PATCH 84/87] powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH commit b1e7cee96127468c2483cf10c2899c9b5cf79bf8 upstream. The Linux Kernel Memory Model [1][2] requires RMW operations that have a return value to be fully ordered. BPF atomic operations with BPF_FETCH (including BPF_XCHG and BPF_CMPXCHG) return a value back so they need to be JITed to fully ordered operations. POWERPC currently emits relaxed operations for these. We can show this by running the following litmus-test: PPC SB+atomic_add+fetch { 0:r0=x; (* dst reg assuming offset is 0 *) 0:r1=2; (* src reg *) 0:r2=1; 0:r4=y; (* P0 writes to this, P1 reads this *) 0:r5=z; (* P1 writes to this, P0 reads this *) 0:r6=0; 1:r2=1; 1:r4=y; 1:r5=z; } P0 | P1 ; stw r2, 0(r4) | stw r2,0(r5) ; | ; loop:lwarx r3, r6, r0 | ; mr r8, r3 | ; add r3, r3, r1 | sync ; stwcx. r3, r6, r0 | ; bne loop | ; mr r1, r8 | ; | ; lwa r7, 0(r5) | lwa r7,0(r4) ; ~exists(0:r7=0 /\ 1:r7=0) Witnesses Positive: 9 Negative: 3 Condition ~exists (0:r7=0 /\ 1:r7=0) Observation SB+atomic_add+fetch Sometimes 3 9 This test shows that the older store in P0 is reordered with a newer load to a different address. Although there is a RMW operation with fetch between them. Adding a sync before and after RMW fixes the issue: Witnesses Positive: 9 Negative: 0 Condition ~exists (0:r7=0 /\ 1:r7=0) Observation SB+atomic_add+fetch Never 0 9 [1] https://www.kernel.org/doc/Documentation/memory-barriers.txt [2] https://www.kernel.org/doc/Documentation/atomic_t.txt Fixes: aea7ef8a82c0 ("powerpc/bpf/32: add support for BPF_ATOMIC bitwise operations") Fixes: 2d9206b22743 ("powerpc/bpf/32: Add instructions for atomic_[cmp]xchg") Fixes: dbe6e2456fb0 ("powerpc/bpf/64: add support for atomic fetch operations") Fixes: 1e82dfaa7819 ("powerpc/bpf/64: Add instructions for atomic_[cmp]xchg") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Puranjay Mohan Reviewed-by: Christophe Leroy Reviewed-by: Naveen N Rao Acked-by: Paul E. McKenney Signed-off-by: Michael Ellerman Link: https://msgid.link/20240513100248.110535-1-puranjay@kernel.org Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/net/bpf_jit_comp32.c | 12 ++++++++++++ arch/powerpc/net/bpf_jit_comp64.c | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c index 8643b2c8b76e..7b3bf859433a 100644 --- a/arch/powerpc/net/bpf_jit_comp32.c +++ b/arch/powerpc/net/bpf_jit_comp32.c @@ -814,6 +814,15 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context * /* Get offset into TMP_REG */ EMIT(PPC_RAW_LI(tmp_reg, off)); + /* + * Enforce full ordering for operations with BPF_FETCH by emitting a 'sync' + * before and after the operation. + * + * This is a requirement in the Linux Kernel Memory Model. + * See __cmpxchg_u32() in asm/cmpxchg.h as an example. + */ + if ((imm & BPF_FETCH) && IS_ENABLED(CONFIG_SMP)) + EMIT(PPC_RAW_SYNC()); tmp_idx = ctx->idx * 4; /* load value from memory into r0 */ EMIT(PPC_RAW_LWARX(_R0, tmp_reg, dst_reg, 0)); @@ -867,6 +876,9 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context * /* For the BPF_FETCH variant, get old data into src_reg */ if (imm & BPF_FETCH) { + /* Emit 'sync' to enforce full ordering */ + if (IS_ENABLED(CONFIG_SMP)) + EMIT(PPC_RAW_SYNC()); EMIT(PPC_RAW_MR(ret_reg, ax_reg)); if (!fp->aux->verifier_zext) EMIT(PPC_RAW_LI(ret_reg - 1, 0)); /* higher 32-bit */ diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index 29ee306d6302..dcb625404938 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -784,6 +784,15 @@ emit_clear: /* Get offset into TMP_REG_1 */ EMIT(PPC_RAW_LI(tmp1_reg, off)); + /* + * Enforce full ordering for operations with BPF_FETCH by emitting a 'sync' + * before and after the operation. + * + * This is a requirement in the Linux Kernel Memory Model. + * See __cmpxchg_u64() in asm/cmpxchg.h as an example. + */ + if ((imm & BPF_FETCH) && IS_ENABLED(CONFIG_SMP)) + EMIT(PPC_RAW_SYNC()); tmp_idx = ctx->idx * 4; /* load value from memory into TMP_REG_2 */ if (size == BPF_DW) @@ -846,6 +855,9 @@ emit_clear: PPC_BCC_SHORT(COND_NE, tmp_idx); if (imm & BPF_FETCH) { + /* Emit 'sync' to enforce full ordering */ + if (IS_ENABLED(CONFIG_SMP)) + EMIT(PPC_RAW_SYNC()); EMIT(PPC_RAW_MR(ret_reg, _R0)); /* * Skip unnecessary zero-extension for 32-bit cmpxchg. From b09b556e48968317887a11243a5331a7bc00ece5 Mon Sep 17 00:00:00 2001 From: Enzo Matsumiya Date: Thu, 6 Jun 2024 13:13:13 -0300 Subject: [PATCH 85/87] smb: client: fix deadlock in smb2_find_smb_tcon() commit 02c418774f76a0a36a6195c9dbf8971eb4130a15 upstream. Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such deadlock. Cc: stable@vger.kernel.org Signed-off-by: Enzo Matsumiya Reviewed-by: Shyam Prasad N Reviewed-by: Paulo Alcantara (Red Hat) Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/smb/client/smb2transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/client/smb2transport.c b/fs/smb/client/smb2transport.c index 69dbd08fd441..763cf946e849 100644 --- a/fs/smb/client/smb2transport.c +++ b/fs/smb/client/smb2transport.c @@ -213,8 +213,8 @@ smb2_find_smb_tcon(struct TCP_Server_Info *server, __u64 ses_id, __u32 tid) } tcon = smb2_find_smb_sess_tcon_unlocked(ses, tid); if (!tcon) { - cifs_put_smb_ses(ses); spin_unlock(&cifs_tcp_ses_lock); + cifs_put_smb_ses(ses); return NULL; } spin_unlock(&cifs_tcp_ses_lock); From 6d6fe13cca9efa1dafb745353ec1a50aca33f9de Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 26 Feb 2024 12:07:31 +0100 Subject: [PATCH 86/87] smp: Provide 'setup_max_cpus' definition on UP too commit 3c2f8859ae1ce53f2a89c8e4ca4092101afbff67 upstream. This was already defined locally by init/main.c, but let's make it generic, as arch/x86/kernel/cpu/topology.c is going to make use of it to have more uniform code. Reviewed-by: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- include/linux/smp.h | 2 ++ init/main.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/smp.h b/include/linux/smp.h index a80ab58ae3f1..5b977f20c139 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -211,6 +211,8 @@ smp_call_function_any(const struct cpumask *mask, smp_call_func_t func, static inline void kick_all_cpus_sync(void) { } static inline void wake_up_all_idle_cpus(void) { } +#define setup_max_cpus 0 + #ifdef CONFIG_UP_LATE_INIT extern void __init up_late_init(void); static inline void smp_init(void) { up_late_init(); } diff --git a/init/main.c b/init/main.c index 2c339793511b..e46aa00b3c99 100644 --- a/init/main.c +++ b/init/main.c @@ -607,7 +607,6 @@ static int __init rdinit_setup(char *str) __setup("rdinit=", rdinit_setup); #ifndef CONFIG_SMP -static const unsigned int setup_max_cpus = NR_CPUS; static inline void setup_nr_cpu_ids(void) { } static inline void smp_prepare_cpus(unsigned int maxcpus) { } #endif From eb44d83053d66372327e69145e8d2fa7400a4991 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 16 Jun 2024 13:41:42 +0200 Subject: [PATCH 87/87] Linux 6.1.94 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Link: https://lore.kernel.org/r/20240613113214.134806994@linuxfoundation.org Tested-by: SeongJae Park Tested-by: Pavel Machek (CIP) Tested-by: Linux Kernel Functional Testing Tested-by: Ron Economos Tested-by: Mark Brown Tested-by: Jon Hunter Tested-by: Salvatore Bonaccorso Tested-by: Peter Schneider  Tested-by: Shuah Khan Tested-by: Mateusz Jończyk Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c5147f1c46f8..6c21684b032e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 6 PATCHLEVEL = 1 -SUBLEVEL = 93 +SUBLEVEL = 94 EXTRAVERSION = NAME = Curry Ramen