From 1934ca1c8e1e82eb9a12a417de358e338d75ddd4 Mon Sep 17 00:00:00 2001 From: Xinhuang Li Date: Wed, 22 Nov 2017 11:32:01 +0800 Subject: [PATCH] arm64: dts: rk3328-evb-android: add new dts for rk3328 evb android this dts is copy from rk3328-evb.dts and add pwm3/firmware nodes Change-Id: Id08e5b2e2d11c34dc81d3a335d5e1a7de21e13cb Signed-off-by: Xinhuang Li --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3328-evb-android.dts | 634 ++++++++++++++++++ 2 files changed, 635 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-evb-android.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index d2891cac266a..f9034bf19a7a 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb-android.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-fpga.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-sheep.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb-android.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb-android.dts new file mode 100644 index 000000000000..550243563b3e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb-android.dts @@ -0,0 +1,634 @@ +/* + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3328.dtsi" +#include + +/ { + model = "Rockchip RK3328 EVB"; + compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; + + chosen { + bootargs = "rockchip_jtag earlyprintk=uart8250-32bit,0xff130000"; + }; + + fiq-debugger { + compatible = "rockchip,fiq-debugger"; + rockchip,serial-id = <2>; + rockchip,signal-irq = <159>; + rockchip,wake-irq = <0>; + /* If enable uart uses irq instead of fiq */ + rockchip,irq-mode-enable = <0>; + rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */ + interrupts = ; + status = "okay"; + }; + + firmware { + android { + compatible = "android,firmware"; + fstab { + compatible = "android,fstab"; + system { + compatible = "android,system"; + dev = "/dev/block/platform/ff520000.rksdmmc/by-name/system"; + type = "ext4"; + mnt_flags = "ro,barrier=1,inode_readahead_blks=8"; + fsmgr_flags = "wait,verify"; + }; + vendor { + compatible = "android,vendor"; + dev = "/dev/block/platform/ff520000.rksdmmc/by-name/vendor"; + type = "ext4"; + mnt_flags = "ro,barrier=1,inode_readahead_blks=8"; + fsmgr_flags = "wait,verify"; + }; + }; + }; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "rockchip,rk3328"; + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "rockchip,hdmi"; + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + + spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rockchip,spdif"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + + wireless-wlan { + compatible = "wlan-platdata"; + rockchip,grf = <&grf>; + wifi_chip_type = "ap6354"; + sdio_vref = <1800>; + WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + +&codec { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "okay"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + supports-emmc; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac2io { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "disabled"; +}; + +&gmac2phy { + phy-supply = <&vcc_phy>; + clock_in_out = "output"; + assigned-clocks = <&cru SCLK_MAC2PHY_SRC>; + assigned-clock-rate = <50000000>; + assigned-clocks = <&cru SCLK_MAC2PHY>; + assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_logic>; +}; + +&hdmi { + #sound-dai-cells = <0>; + ddc-i2c-scl-high-time-ns = <9625>; + ddc-i2c-scl-low-time-ns = <10000>; + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: rk805@18 { + compatible = "rockchip,rk805"; + status = "okay"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + + rtc { + status = "disabled"; + }; + + pwrkey { + status = "disabled"; + }; + + gpio { + status = "okay"; + }; + + regulators { + compatible = "rk805-regulator"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_logic: RK805_DCDC1@0 { + regulator-compatible = "RK805_DCDC1"; + regulator-name = "vdd_logic"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <0x1>; + regulator-ramp-delay = <12500>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: RK805_DCDC2@1 { + regulator-compatible = "RK805_DCDC2"; + regulator-name = "vdd_arm"; + regulator-init-microvolt = <1225000>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <0x1>; + regulator-ramp-delay = <12500>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: RK805_DCDC3@2 { + regulator-compatible = "RK805_DCDC3"; + regulator-name = "vcc_ddr"; + regulator-initial-mode = <0x1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + }; + }; + + vcc_io: RK805_DCDC4@3 { + regulator-compatible = "RK805_DCDC4"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: RK805_LDO1@4 { + regulator-compatible = "RK805_LDO1"; + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_18emmc: RK805_LDO2@5 { + regulator-compatible = "RK805_LDO2"; + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: RK805_LDO3@6 { + regulator-compatible = "RK805_LDO3"; + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&h265e { + status = "okay"; +}; + +&i2s0 { + #sound-dai-cells = <0>; + rockchip,bclk-fs = <128>; + status = "okay"; +}; + +&i2s1 { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_18emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */ + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <1 18 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm3 { + status = "okay"; + compatible = "rockchip,remotectl-pwm"; + remote_pwm_id = <3>; + handle_cpu_id = <1>; + remote_support_psci = <1>; + + ir_key1 { + rockchip,usercode = <0x4040>; + rockchip,key_table = + <0xf2 KEY_REPLY>, + <0xba KEY_BACK>, + <0xf4 KEY_UP>, + <0xf1 KEY_DOWN>, + <0xef KEY_LEFT>, + <0xee KEY_RIGHT>, + <0xbd KEY_HOME>, + <0xea KEY_VOLUMEUP>, + <0xe3 KEY_VOLUMEDOWN>, + <0xe2 KEY_SEARCH>, + <0xb2 KEY_POWER>, + <0xbc KEY_MUTE>, + <0xec KEY_MENU>, + <0xbf 0x190>, + <0xe0 0x191>, + <0xe1 0x192>, + <0xe9 183>, + <0xe6 248>, + <0xe8 185>, + <0xe7 186>, + <0xf0 388>, + <0xbe 0x175>; + }; + + ir_key2 { + rockchip,usercode = <0xff00>; + rockchip,key_table = + <0xf9 KEY_HOME>, + <0xbf KEY_BACK>, + <0xfb KEY_MENU>, + <0xaa KEY_REPLY>, + <0xb9 KEY_UP>, + <0xe9 KEY_DOWN>, + <0xb8 KEY_LEFT>, + <0xea KEY_RIGHT>, + <0xeb KEY_VOLUMEDOWN>, + <0xef KEY_VOLUMEUP>, + <0xf7 KEY_MUTE>, + <0xe7 KEY_POWER>, + <0xfc KEY_POWER>, + <0xa9 KEY_VOLUMEDOWN>, + <0xa8 KEY_VOLUMEDOWN>, + <0xe0 KEY_VOLUMEDOWN>, + <0xa5 KEY_VOLUMEDOWN>, + <0xab 183>, + <0xb7 388>, + <0xe8 388>, + <0xf8 184>, + <0xaf 185>, + <0xed KEY_VOLUMEDOWN>, + <0xee 186>, + <0xb3 KEY_VOLUMEDOWN>, + <0xf1 KEY_VOLUMEDOWN>, + <0xf2 KEY_VOLUMEDOWN>, + <0xf3 KEY_SEARCH>, + <0xb4 KEY_VOLUMEDOWN>, + <0xbe KEY_SEARCH>; + }; + + ir_key3 { + rockchip,usercode = <0x1dcc>; + rockchip,key_table = + <0xee KEY_REPLY>, + <0xf0 KEY_BACK>, + <0xf8 KEY_UP>, + <0xbb KEY_DOWN>, + <0xef KEY_LEFT>, + <0xed KEY_RIGHT>, + <0xfc KEY_HOME>, + <0xf1 KEY_VOLUMEUP>, + <0xfd KEY_VOLUMEDOWN>, + <0xb7 KEY_SEARCH>, + <0xff KEY_POWER>, + <0xf3 KEY_MUTE>, + <0xbf KEY_MENU>, + <0xf9 0x191>, + <0xf5 0x192>, + <0xb3 388>, + <0xbe KEY_1>, + <0xba KEY_2>, + <0xb2 KEY_3>, + <0xbd KEY_4>, + <0xf9 KEY_5>, + <0xb1 KEY_6>, + <0xfc KEY_7>, + <0xf8 KEY_8>, + <0xb0 KEY_9>, + <0xb6 KEY_0>, + <0xb5 KEY_BACKSPACE>; + }; +}; + +&rkvdec { + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + supports-sdio; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + supports-sd; + status = "okay"; + vmmc-supply = <&vcc_sd>; +}; + +&spdif { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + otg-vbus-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&u3phy { + vbus-drv-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&u3phy_utmi { + status = "okay"; +}; + +&u3phy_pipe { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usbdrd3 { + status = "okay"; +}; + +&usbdrd_dwc3 { + status = "okay"; +}; + +&vepu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vpu_service { + status = "okay"; +};