diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 3ede2e8192ae..c2ab08541dba 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -123,6 +123,11 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,android", "rockchip,rk3399-excavator-edp-avb", "rockchip,rk3399";
 
+- Rockchip RK3399 Excavator Board (Linux):
+    Required root node properties:
+      - compatible = "rockchip,linux", "rockchip,rk3399";
+      - compatible = "rockchip,rk3399-excavator-linux", "rockchip,rk3399-excavator-v10-linux";
+
 - Rockchip RK3399pro evb:
     Required root node properties:
       - compatible = "rockchip,rk3399pro-evb-v10", "rockchip,rk3399pro";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index d4836787973b..1019a7f1c533 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -106,6 +106,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp-avb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp-avb-rk1608.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-linux.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-v10-linux.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-linux-for-rk1808-cascade.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-tve1030g.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-tve1030g-avb.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator-v10-linux.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator-v10-linux.dts
new file mode 100644
index 000000000000..2beb2a097de2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator-v10-linux.dts
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rk3399-excavator-sapphire.dtsi"
+#include "rk3399-linux.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip RK3399 Excavator Board (Linux Opensource)";
+	compatible = "rockchip,rk3399-excavator-v10-linux", "rockchip,rk3399";
+
+	vcc_lcd: vcc-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lcd";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccadc_ref: vccadc-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		esc-key {
+			linux,code = <KEY_ESC>;
+			label = "esc";
+			press-threshold-microvolt = <1310000>;
+		};
+
+		menu-key {
+			linux,code = <KEY_MENU>;
+			label = "menu";
+			press-threshold-microvolt = <987000>;
+		};
+
+		vol-down-key {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			press-threshold-microvolt = <300000>;
+		};
+
+		vol-up-key {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	panel: panel {
+		compatible = "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		prepare-delay-ms = <20>;
+		enable-delay-ms = <20>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <200000000>;
+				hactive = <1536>;
+				vactive = <2048>;
+				hfront-porch = <12>;
+				hsync-len = <16>;
+				hback-porch = <48>;
+				vfront-porch = <8>;
+				vsync-len = <4>;
+				vback-porch = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		ports {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_out>;
+			};
+		};
+	};
+
+	ext_cam_clk: external-camera-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "CLK_CAMERA_27MHZ";
+		#clock-cells = <0>;
+	};
+
+	test_power: test-power {
+		status = "okay";
+	};
+};
+
+&backlight {
+	status = "okay";
+	enable-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&edp {
+	status = "okay";
+	force-hpd;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			edp_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&edp_in_vopl {
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&hdmi_in_vopb {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "okay";
+
+	gsl3673: gsl3673@40 {
+		compatible = "GSL,GSL3673";
+		reg = <0x40>;
+		screen_max_x = <1536>;
+		screen_max_y = <2048>;
+		irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
+		rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	tc358749x: tc358749x@f {
+		compatible = "toshiba,tc358749";
+		reg = <0xf>;
+		clocks = <&ext_cam_clk>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		/* hardware irq-pin is dangling
+		 * connect it to other gpio then configurate follow interrupt
+		 * or del config just using software poll
+		 */
+		//interrupt-parent = <&gpio2>;
+		//interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmiin_gpios>;
+		status = "disabled";
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+		rockchip,camera-module-name = "default";
+		rockchip,camera-module-lens-name = "default";
+		port {
+			hdmiin_out0: endpoint {
+				/* Unlinked mipi dphy rx0 */
+				//remote-endpoint = <&mipi_in_ucam0>;
+				data-lanes = <1 2 3 4>;
+				clock-noncontinuous;
+				link-frequencies =
+					/bits/ 64 <297000000>;
+			};
+		};
+	};
+
+	vm149c: vm149c@0c {
+		compatible = "silicon touch,vm149c";
+		status = "okay";
+		reg = <0x0c>;
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+	};
+
+	ov13850: ov13850@10 {
+		compatible = "ovti,ov13850";
+		status = "okay";
+		reg = <0x10>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		clock-names = "xvclk";
+
+		/* conflict with csi-ctl-gpios */
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "rockchip,camera_default";
+		pinctrl-0 = <&cif_clkout>;
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+		rockchip,camera-module-name = "CMK-CT0116";
+		rockchip,camera-module-lens-name = "Largan-50013A1";
+
+		lens-focus = <&vm149c>;
+
+		port {
+			ucam_out0: endpoint {
+				remote-endpoint = <&mipi_in_ucam0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&isp0_mmu {
+	status = "okay";
+};
+
+&isp1_mmu {
+	status = "okay";
+};
+
+&mipi_dphy_rx0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in_ucam0: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ucam_out0>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dphy_rx0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&isp0_mipi_in>;
+			};
+		};
+	};
+};
+
+&mipi_dphy_tx1rx1 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in_ucam1: endpoint@1 {
+				reg = <1>;
+				/* Unlinked camera */
+				//remote-endpoint = <&ucam_out1>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dphy_tx1rx1_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&isp1_mipi_in>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&rkisp1_0 {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		isp0_mipi_in: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dphy_rx0_out>;
+		};
+	};
+};
+
+&rkisp1_1 {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		isp1_mipi_in: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dphy_tx1rx1_out>;
+		};
+	};
+};
+
+&route_edp {
+	status = "okay";
+};
+
+&rt5651_sound {
+	compatible = "rockchip,multicodecs-card";
+	rockchip,card-name = "rockchip,rt5651-codec";
+	rockchip,codec-hp-det;
+	rockchip,mclk-fs = <256>;
+	rockchip,cpu = <&i2s0>;
+	rockchip,codec = <&rt5651>;
+};
+
+&saradc {
+	vref-supply = <&vccadc_ref>;
+};
+
+/* HACK: the eayly v10 board can't run the hs400 */
+&sdhci {
+	/delete-property/mmc-hs400-1_8v;
+	/delete-property/mmc-hs400-enhanced-strobe;
+};
+
+/* HACK: the eayly v10 board had the error hardware design by pwm regulator */
+&vdd_log {
+	regulator-max-microvolt = <1000000>;
+};
+
+&vopb {
+	assigned-clocks = <&cru DCLK_VOP0_DIV>;
+	assigned-clock-parents = <&cru PLL_CPLL>;
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	assigned-clocks = <&cru DCLK_VOP0_DIV>;
+	assigned-clock-parents = <&cru PLL_CPLL>;
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmiin {
+		hdmiin_gpios: hdmiin-gpios {
+			rockchip,pins =
+				<2 5 RK_FUNC_GPIO &pcfg_output_high>,
+				<2 6 RK_FUNC_GPIO &pcfg_output_high>,
+				<2 7 RK_FUNC_GPIO &pcfg_pull_none>,
+				<2 8 RK_FUNC_GPIO &pcfg_output_high>,
+				<2 9 RK_FUNC_GPIO &pcfg_output_high>,
+				<2 10 RK_FUNC_GPIO &pcfg_output_low>,
+				<2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* DON'T PUT ANYTHING BELOW HERE.  PUT IT ABOVE PINCTRL */
+/* DON'T PUT ANYTHING BELOW HERE.  PUT IT ABOVE PINCTRL */
+/* DON'T PUT ANYTHING BELOW HERE.  PUT IT ABOVE PINCTRL */