From 25f1fa27d7a96b574064d6198008ec6c052d3a1f Mon Sep 17 00:00:00 2001 From: Yanchao Hu Date: Tue, 8 Mar 2022 15:17:38 +0800 Subject: [PATCH] arm64: dts: rockchip: add RK630 evaluation board devicetree Signed-off-by: Yanchao Hu Change-Id: I9c8512b42c66fc34fa7de036ad6fe9608eaac729 --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk630-rk3568-ddr3-v10.dts | 696 ++++++++++++++++++ 2 files changed, 697 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk630-rk3568-ddr3-v10.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 8046acf41fd8..65c20813586e 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -111,3 +111,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v10-linux.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v10-linux-spi-nand.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux-spi-nand.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk630-rk3568-ddr3-v10.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk630-rk3568-ddr3-v10.dts b/arch/arm64/boot/dts/rockchip/rk630-rk3568-ddr3-v10.dts new file mode 100644 index 000000000000..0b12177a0e52 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk630-rk3568-ddr3-v10.dts @@ -0,0 +1,696 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include "rk3568.dtsi" + +/ { + model = "Rockchip RK630 RK3568 DDR3 V10 Board"; + compatible = "rockchip,rk630-rk3568-ddr3-v10", "rockchip,rk3568"; + + chosen: chosen { + bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait"; + }; + + fiq-debugger { + compatible = "rockchip,fiq-debugger"; + rockchip,serial-id = <2>; + rockchip,wake-irq = <0>; + /* If enable uart uses irq instead of fiq */ + rockchip,irq-mode-enable = <1>; + rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */ + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; + }; + + debug: debug@fd904000 { + compatible = "rockchip,debug"; + reg = <0x0 0xfd904000 0x0 0x1000>, + <0x0 0xfd905000 0x0 0x1000>, + <0x0 0xfd906000 0x0 0x1000>, + <0x0 0xfd907000 0x0 0x1000>; + }; + + cspmu: cspmu@fd90c000 { + compatible = "rockchip,cspmu"; + reg = <0x0 0xfd90c000 0x0 0x1000>, + <0x0 0xfd90d000 0x0 0x1000>, + <0x0 0xfd90e000 0x0 0x1000>, + <0x0 0xfd90f000 0x0 0x1000>; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + vol-up-key { + label = "volume up"; + linux,code = ; + press-threshold-microvolt = <1750>; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc3v3_lcd0_n: vcc3v3-lcd0-n { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd0_n"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_lcd1_n: vcc3v3-lcd1-n { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd1_n"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h &wifi_32k>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + wireless_wlan: wireless-wlan { + compatible = "wlan-platdata"; + rockchip,grf = <&grf>; + wifi_chip_type = "ap6398s"; + status = "okay"; + }; + + wireless_bluetooth: wireless-bluetooth { + compatible = "bluetooth-platdata"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "rts_gpio"; + pinctrl-0 = <&uart1m0_rtsn>; + pinctrl-1 = <&uart1_gpios>; + BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + +&reserved_memory { + ramoops: ramoops@110000 { + compatible = "ramoops"; + reg = <0x0 0x110000 0x0 0xf0000>; + record-size = <0x20000>; + console-size = <0x80000>; + ftrace-size = <0x00000>; + pmsg-size = <0x50000>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&dfi { + status = "okay"; +}; + +&dmc { + center-supply = <&vdd_logic>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: tcs4525@1c { + compatible = "tcs,tcs452x"; + reg = <0x1c>; + vin-supply = <&vcc5v0_sys>; + regulator-compatible = "fan53555-reg"; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default", "pmic-sleep", + "pmic-power-off", "pmic-reset"; + pinctrl-0 = <&pmic_int>; + pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; + pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; + pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; + + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + /* 1: rst regs (default in codes), 0: rst the pmic */ + pmic-reset-func = <0>; + /* not save the PMIC_POWER_EN register in uboot */ + not-save-power-en = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + pwrkey { + status = "okay"; + }; + + pinctrl_rk8xx: pinctrl_rk8xx { + gpio-controller; + #gpio-cells = <2>; + + rk817_slppin_null: rk817_slppin_null { + pins = "gpio_slp"; + function = "pin_fun0"; + }; + + rk817_slppin_slp: rk817_slppin_slp { + pins = "gpio_slp"; + function = "pin_fun1"; + }; + + rk817_slppin_pwrdn: rk817_slppin_pwrdn { + pins = "gpio_slp"; + function = "pin_fun2"; + }; + + rk817_slppin_rst: rk817_slppin_rst { + pins = "gpio_slp"; + function = "pin_fun3"; + }; + }; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_up>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_32k: wifi-32k { + rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-bluetooth { + uart1_gpios: uart1-gpios { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + + /* + * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. + * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; + * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages + * must be consistent with the software configuration correspondingly + * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration + * should also be configured to 1.8V accordingly; + * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration + * should also be configured to 3.3V accordingly; + * 3/ VCCIO2 voltage control selection (0xFDC20140) + * BIT[0]: 0x0: from GPIO_0A7 (default) + * BIT[0]: 0x1: from GRF + * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: + * L:VCCIO2 must supply 3.3V + * H:VCCIO2 must supply 1.8V + */ +&pmu_io_domains { + status = "okay"; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcca_1v8>; +}; + +&sdhci { + bus-width = <8>; + supports-emmc; + non-removable; + max-frequency = <200000000>; + status = "okay"; +}; + +&sfc { + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&sdmmc1 { + max-frequency = <150000000>; + supports-sdio; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; +}; + +&wireless_wlan { + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_irq>; + WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy0_otg { + vbus-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "disabled"; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "disabled"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "disabled"; +}; + +&usb_host0_ehci { + status = "disabled"; +}; + +&usb_host0_ohci { + status = "disabled"; +}; + +&usb_host1_ehci { + status = "disabled"; +}; + +&usb_host1_ohci { + status = "disabled"; +}; + +&usbdrd_dwc3 { + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + extcon = <&usb2phy0>; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + status = "okay"; +}; + +&usbdrd30 { + status = "okay"; +}; + +&usbhost30 { + status = "okay"; +}; + +&combphy0_us { + rockchip,dis-u3otg0-port; + status = "okay"; +}; + +&combphy1_usq { + rockchip,dis-u3otg1-port; + status = "okay"; +}; + +&combphy2_psq { + status = "disabled"; +}; + +&usbhost_dwc3 { + phys = <&u2phy0_host>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + status = "okay"; +};