mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-09 12:17:12 +09:00
dts: add p401 dts
PD#138714: add p401 dts p401 is A112 development board with SLC Nand Change-Id: Ia4590b0c1995ffbd6c282f71a3d9db88b1912604 Signed-off-by: Frank Chen <frank.chen@amlogic.com>
This commit is contained in:
Frank Chen
@@ -13659,9 +13659,10 @@ F: drivers/amlogic/mmc/emmc_key.c
|
||||
F: drivers/amlogic/mmc/emmc_key.h
|
||||
F: include/linux/amlogic/key_manage.h
|
||||
|
||||
AMLOGIC P400 BSP
|
||||
M: Nan Li <frank.chen@amlogic.com>
|
||||
AMLOGIC P400/P401 BSP
|
||||
M: Frank Chen <frank.chen@amlogic.com>
|
||||
F: arch/arm64/boot/dts/amlogic/gxl_p400_2g.dts
|
||||
F: arch/arm64/boot/dts/amlogic/gxl_p401_2g.dts
|
||||
|
||||
ANDROID LOGGER Driver
|
||||
M: Frank Chen <frank.chen@amlogic.com>
|
||||
|
||||
588
arch/arm64/boot/dts/amlogic/gxl_p401_2g.dts
Normal file
588
arch/arm64/boot/dts/amlogic/gxl_p401_2g.dts
Normal file
@@ -0,0 +1,588 @@
|
||||
/*
|
||||
* arch/arm64/boot/dts/amlogic/gxl_p401_2g.dts
|
||||
*
|
||||
* Copyright (C) 2017 Amlogic, Inc. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include "mesongxl.dtsi"
|
||||
/ {
|
||||
model = "Amlogic";
|
||||
amlogic-dt-id = "gxl_p401_2g";
|
||||
compatible = "amlogic, Gxl";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
};
|
||||
|
||||
ion_dev {
|
||||
compatible = "amlogic, ion_dev";
|
||||
memory-region = <&ion_reserved>;
|
||||
};
|
||||
|
||||
memory@00000000 {
|
||||
device_type = "memory";
|
||||
linux,usable-memory = <0x0 0x0100000 0x0 0x7ff00000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
/* global autoconfigured region for contiguous allocations */
|
||||
secmon_reserved:linux,secmon {
|
||||
compatible = "amlogic, aml_secmon_memory";
|
||||
reg = <0x0 0x10000000 0x0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
secos_reserved:linux,secos {
|
||||
status = "disable";
|
||||
compatible = "amlogic, aml_secos_memory";
|
||||
reg = <0x0 0x05300000 0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
pstore:aml_pstore {
|
||||
compatible = "amlogic, pstore";
|
||||
reg = <0x0 0x07300000 0x0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
fb_reserved:linux,meson-fb {
|
||||
compatible = "amlogic, fb-memory";
|
||||
size = <0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
di_reserved:linux,di {
|
||||
compatible = "amlogic, di-mem";
|
||||
size = <0x0 0x1e00000>; //10x1920x1088x3/2=30M
|
||||
//no-map;
|
||||
};
|
||||
|
||||
ion_reserved:linux,ion-dev {
|
||||
compatible = "amlogic, idev-mem";
|
||||
size = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
/* POST PROCESS MANAGER */
|
||||
ppmgr_reserved:linux,ppmgr {
|
||||
compatible = "shared-dma-pool";
|
||||
size = <0x0 0x0>;
|
||||
};
|
||||
|
||||
codec_mm_cma:linux,codec_mm_cma {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
size = <0x0 0xc000000>;
|
||||
alignment = <0x0 0x400000>;
|
||||
linux,contiguous-region;
|
||||
};
|
||||
picdec_cma_reserved:linux,picdec {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
size = <0x0 0x0>;
|
||||
alignment = <0x0 0x0>;
|
||||
linux,contiguous-region;
|
||||
};
|
||||
/* codec shared reserved */
|
||||
codec_mm_reserved:linux,codec_mm_reserved {
|
||||
compatible = "amlogic, codec-mm-reserved";
|
||||
size = <0x0 0x4100000>;
|
||||
alignment = <0x0 0x100000>;
|
||||
//no-map;
|
||||
};
|
||||
};
|
||||
|
||||
sd_emmc_c: emmc@d0074000 {
|
||||
status = "okay";
|
||||
compatible = "amlogic, meson-aml-mmc";
|
||||
reg = <0x0 0xd0074000 0x0 0x2000>;
|
||||
interrupts = <0 218 1>;
|
||||
pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
|
||||
pinctrl-0 = <&emmc_clk_cmd_pins>;
|
||||
pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done>;
|
||||
clocks = <&clkc CLKID_SD_EMMC_C>,
|
||||
<&clkc CLKID_SD_EMMC_C_P0_COMP>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "core", "clkin0", "clkin1";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
emmc {
|
||||
status = "disabled";
|
||||
pinname = "emmc";
|
||||
ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
|
||||
caps = "MMC_CAP_8_BIT_DATA",
|
||||
"MMC_CAP_MMC_HIGHSPEED",
|
||||
"MMC_CAP_SD_HIGHSPEED",
|
||||
"MMC_CAP_NONREMOVABLE",
|
||||
"MMC_CAP_1_8V_DDR",
|
||||
"MMC_CAP_HW_RESET",
|
||||
"MMC_CAP_ERASE",
|
||||
"MMC_CAP_CMD23";
|
||||
caps2 = "MMC_CAP2_HS200", "MMC_CAP2_HS400";
|
||||
f_min = <300000>;
|
||||
f_max = <100000000>;
|
||||
max_req_size = <0x20000>; /**128KB*/
|
||||
hw_reset = <&gpio BOOT_9 GPIO_ACTIVE_HIGH>;
|
||||
card_type = <1>;
|
||||
/* 1:mmc card(include eMMC),
|
||||
* 2:sd card(include tSD)
|
||||
*/
|
||||
};
|
||||
};
|
||||
|
||||
sd_emmc_b:sd@d0072000 {
|
||||
status = "okay";
|
||||
compatible = "amlogic, meson-aml-mmc";
|
||||
reg = <0x0 0xd0072000 0x0 0x2000>;
|
||||
interrupts = <0 217 1>;
|
||||
pinctrl-names = "sd_all_pins",
|
||||
"sd_clk_cmd_pins",
|
||||
"sd_clk_cmd_uart_pins",
|
||||
"sd_to_ao_uart_pins",
|
||||
"ao_to_sd_uart_pins";
|
||||
pinctrl-0 = <&sd_all_pins>;
|
||||
pinctrl-1 = <&sd_clk_cmd_pins>;
|
||||
pinctrl-2 = <&sd_clk_cmd_pins &ao_to_sd_uart_pins>;
|
||||
pinctrl-3 = <&sd_to_ao_uart_pins>;
|
||||
pinctrl-4 = <&ao_to_sd_uart_pins>;
|
||||
clocks = <&clkc CLKID_SD_EMMC_B>,
|
||||
<&clkc CLKID_SD_EMMC_B_P0_COMP>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "core", "clkin0", "clkin1";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
sd {
|
||||
status = "disabled";
|
||||
pinname = "sd";
|
||||
ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
|
||||
caps = "MMC_CAP_4_BIT_DATA",
|
||||
"MMC_CAP_MMC_HIGHSPEED",
|
||||
"MMC_CAP_SD_HIGHSPEED";
|
||||
/* "MMC_CAP_UHS_SDR12",
|
||||
* "MMC_CAP_UHS_SDR25",
|
||||
* "MMC_CAP_UHS_SDR50",
|
||||
* "MMC_CAP_UHS_SDR104";
|
||||
*/
|
||||
f_min = <400000>;
|
||||
f_max = <100000000>;
|
||||
max_req_size = <0x20000>; /**128KB*/
|
||||
gpio_dat3 = <&gpio CARD_4 GPIO_ACTIVE_HIGH>;
|
||||
jtag_pin = <&gpio CARD_0 GPIO_ACTIVE_HIGH>;
|
||||
gpio_cd = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
|
||||
card_type = <5>;
|
||||
/* 0:unknown,
|
||||
* 1:mmc card(include eMMC),
|
||||
* 2:sd card(include tSD),
|
||||
* 3:sdio device(ie:sdio-wifi),
|
||||
* 4:SD combo (IO+mem) card,
|
||||
* 5:NON sdio device(means sd/mmc card),
|
||||
* other:reserved
|
||||
*/
|
||||
};
|
||||
};
|
||||
|
||||
sd_emmc_a:sdio@d0070000 {
|
||||
status = "okay";
|
||||
compatible = "amlogic, meson-aml-mmc";
|
||||
reg = <0x0 0xd0070000 0x0 0x2000>;
|
||||
interrupts = <0 216 4>;
|
||||
pinctrl-names = "sdio_clk_cmd_pins", "sdio_all_pins";
|
||||
pinctrl-0 = <&sdio_clk_cmd_pins>;
|
||||
pinctrl-1 = <&sdio_all_pins>;
|
||||
clocks = <&clkc CLKID_SD_EMMC_A>,
|
||||
<&clkc CLKID_SD_EMMC_A_P0_COMP>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "core", "clkin0", "clkin1";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
sdio {
|
||||
status = "disabled";
|
||||
pinname = "sdio";
|
||||
ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
|
||||
caps = "MMC_CAP_4_BIT_DATA",
|
||||
"MMC_CAP_MMC_HIGHSPEED",
|
||||
"MMC_CAP_SD_HIGHSPEED",
|
||||
"MMC_CAP_NONREMOVABLE",
|
||||
"MMC_CAP_UHS_SDR12",
|
||||
"MMC_CAP_UHS_SDR25",
|
||||
"MMC_CAP_UHS_SDR50",
|
||||
"MMC_CAP_UHS_SDR104",
|
||||
"MMC_PM_KEEP_POWER",
|
||||
"MMC_CAP_SDIO_IRQ";
|
||||
f_min = <400000>;
|
||||
f_max = <200000000>;
|
||||
max_req_size = <0x20000>; /**128KB*/
|
||||
card_type = <3>;
|
||||
/* 3:sdio device(ie:sdio-wifi),
|
||||
* 4:SD combo (IO+mem) card
|
||||
*/
|
||||
};
|
||||
};
|
||||
|
||||
uart_AO: serial@c81004c0 {
|
||||
compatible = "amlogic, meson-uart";
|
||||
reg = <0x0 0xc81004c0 0x0 0x18>;
|
||||
interrupts = <0 193 1>;
|
||||
status = "okay";
|
||||
xtal_tick_en = <1>;
|
||||
fifosize = < 64 >;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ao_uart_pins>;
|
||||
support-sysrq = <0>; /* 0 not support , 1 support */
|
||||
};
|
||||
ethmac: ethernet@0xc9410000 {
|
||||
compatible = "amlogic, gxbb-eth-dwmac";
|
||||
reg = <0x0 0xc9410000 0x0 0x10000
|
||||
0x0 0xc8834540 0x0 0x8
|
||||
0x0 0xc8834558 0x0 0xc>;
|
||||
interrupts = <0 8 1>;
|
||||
pinctrl-names = "external_eth_pins";
|
||||
pinctrl-0 = <&external_eth_pins>;
|
||||
rst_pin-gpios = <&gpio GPIOZ_14 0>;
|
||||
GPIOZ4_pin-gpios = <&gpio GPIOZ_4 0>;
|
||||
GPIOZ5_pin-gpios = <&gpio GPIOZ_5 0>;
|
||||
mc_val_internal_phy = <0x1800>;
|
||||
mc_val_external_phy = <0x1621>;
|
||||
cali_val = <0x20000>;
|
||||
interrupt-names = "macirq";
|
||||
clocks = <&clkc CLKID_ETH>;
|
||||
clock-names = "ethclk81";
|
||||
internal_phy=<1>;
|
||||
};
|
||||
|
||||
codec_io {
|
||||
compatible = "amlogic, codec_io";
|
||||
#address-cells=<2>;
|
||||
#size-cells=<2>;
|
||||
ranges;
|
||||
io_cbus_base{
|
||||
reg = <0x0 0xC1100000 0x0 0x100000>;
|
||||
};
|
||||
io_dos_base{
|
||||
reg = <0x0 0xc8820000 0x0 0x10000>;
|
||||
};
|
||||
io_hiubus_base{
|
||||
reg = <0x0 0xc883c000 0x0 0x2000>;
|
||||
};
|
||||
io_aobus_base{
|
||||
reg = <0x0 0xc8100000 0x0 0x100000>;
|
||||
};
|
||||
io_vcbus_base{
|
||||
reg = <0x0 0xd0100000 0x0 0x40000>;
|
||||
};
|
||||
io_dmc_base{
|
||||
reg = <0x0 0xc8838000 0x0 0x400>;
|
||||
};
|
||||
};
|
||||
|
||||
codec_mm {
|
||||
compatible = "amlogic, codec, mm";
|
||||
memory-region = <&codec_mm_cma &codec_mm_reserved>;
|
||||
dev_name = "codec_mm";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
canvas{
|
||||
compatible = "amlogic, meson, canvas";
|
||||
dev_name = "amlogic-canvas";
|
||||
status = "ok";
|
||||
reg = <0x0 0xc8838000 0x0 0x400>;
|
||||
};
|
||||
|
||||
mesonstream {
|
||||
compatible = "amlogic, codec, streambuf";
|
||||
dev_name = "mesonstream";
|
||||
status = "okay";
|
||||
clocks = <&clkc CLKID_DOS_PARSER
|
||||
&clkc CLKID_VPU_INTR
|
||||
&clkc CLKID_DEMUX
|
||||
&clkc CLKID_DOS
|
||||
&clkc CLKID_VDEC_MUX
|
||||
&clkc CLKID_HCODEC_MUX
|
||||
&clkc CLKID_HEVC_MUX>;
|
||||
clock-names = "parser_top",
|
||||
"vpu_intr",
|
||||
"demux",
|
||||
"vdec",
|
||||
"clk_vdec_mux",
|
||||
"clk_hcodec_mux",
|
||||
"clk_hevc_mux";
|
||||
};
|
||||
|
||||
vdec {
|
||||
compatible = "amlogic, vdec";
|
||||
dev_name = "vdec.0";
|
||||
status = "okay";
|
||||
interrupts = <0 3 1
|
||||
0 23 1
|
||||
0 32 1
|
||||
0 43 1
|
||||
0 44 1
|
||||
0 45 1>;
|
||||
interrupt-names = "vsync",
|
||||
"demux",
|
||||
"parser",
|
||||
"mailbox_0",
|
||||
"mailbox_1",
|
||||
"mailbox_2";
|
||||
};
|
||||
|
||||
|
||||
dwc3: dwc3@c9000000 {
|
||||
compatible = "synopsys, dwc3";
|
||||
reg = <0x0 0xc9000000 0x0 0x100000>;
|
||||
interrupts = <0 30 4>;
|
||||
usb-phy = <&usb2_phy>, <&usb3_phy>;
|
||||
cpu-type = "gxl";
|
||||
clock-src = "usb3.0";
|
||||
};
|
||||
|
||||
usb2_phy: usb2phy@d0078000 {
|
||||
compatible = "amlogic, amlogic-new-usb2";
|
||||
portnum = <3>;
|
||||
reg = <0x0 0xd0078000 0x0 0x80>;
|
||||
};
|
||||
|
||||
usb3_phy: usb3phy@d0078080 {
|
||||
compatible = "amlogic, amlogic-new-usb3";
|
||||
portnum = <0>;
|
||||
reg = <0x0 0xd0078080 0x0 0x20>;
|
||||
};
|
||||
|
||||
dwc2_a {
|
||||
compatible = "amlogic, dwc2";
|
||||
device_name = "dwc2_a";
|
||||
reg = <0x0 0xc9100000 0x0 0x40000>;
|
||||
status = "okay";
|
||||
interrupts = <0 31 4>;
|
||||
pl-periph-id = <0>; /** lm name */
|
||||
clock-src = "usb0"; /** clock src */
|
||||
port-id = <0>; /** ref to mach/usb.h */
|
||||
port-type = <2>; /** 0: otg, 1: host, 2: slave */
|
||||
port-speed = <0>; /** 0: default, high, 1: full */
|
||||
port-config = <0>; /** 0: default */
|
||||
port-dma = <0>; /** 0: default ... 6: disable*/
|
||||
port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
|
||||
usb-fifo = <728>;
|
||||
cpu-type = "gxl";
|
||||
controller-type = <2>; /** 0: normal, 1: host, 2: device*/
|
||||
phy-reg = <0xd0078000>;
|
||||
phy-reg-size = <0xa0>;
|
||||
clocks = <&clkc CLKID_USB_GENERAL
|
||||
&clkc CLKID_USB1_TO_DDR
|
||||
&clkc CLKID_USB1>;
|
||||
clock-names = "usb_general",
|
||||
"usb1",
|
||||
"usb1_to_ddr";
|
||||
};
|
||||
|
||||
vout {
|
||||
compatible = "amlogic, vout";
|
||||
dev_name = "vout";
|
||||
status = "okay";
|
||||
fr_auto_policy = <0>;
|
||||
};
|
||||
|
||||
cvbsout {
|
||||
compatible = "amlogic, cvbsout";
|
||||
dev_name = "cvbsout";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
amhdmitx: amhdmitx{
|
||||
compatible = "amlogic, amhdmitx";
|
||||
dev_name = "amhdmitx";
|
||||
status = "okay";
|
||||
vend-data = <&vend_data>;
|
||||
pinctrl-names="hdmitx_hpd", "hdmitx_ddc";
|
||||
pinctrl-0=<&hdmitx_hpd>;
|
||||
pinctrl-1=<&hdmitx_ddc>;
|
||||
/* HPD, 57 + 32 = 89; CEC, 151 + 32 = 183*/
|
||||
interrupts = <0 57 1>;
|
||||
interrupt-names = "hdmitx_hpd";
|
||||
vend_data: vend_data{ /* Should modified by Customer */
|
||||
vendor_name = "Amlogic"; /* Max Chars: 8 */
|
||||
/* standards.ieee.org/develop/regauth/oui/oui.txt */
|
||||
vendor_id = <0x000000>;
|
||||
product_desc = "MBox Meson Ref"; /* Max Chars: 16 */
|
||||
};
|
||||
};
|
||||
|
||||
pwm {
|
||||
compatible = "amlogic, meson-pwm";
|
||||
status = "okay";
|
||||
pwm-outputs = <PWM_A>,<PWM_B>,<PWM_C>,<PWM_D>,
|
||||
<PWM_E>,<PWM_F>,<PWM_AO_A>,<PWM_AO_B>;
|
||||
pwm-outputs-new = <PWM_A>,<PWM_B>,<PWM_C>,<PWM_D>,
|
||||
<PWM_E>,<PWM_F>,<PWM_AO_A>,<PWM_AO_B>,
|
||||
<PWM_A2>,<PWM_B2>,<PWM_C2>,<PWM_D2>,
|
||||
<PWM_E2>,<PWM_F2>,<PWM_AO_A2>,<PWM_AO_B2>;
|
||||
reg = <0x0 0xc1108550 0x0 0x30>,
|
||||
<0x0 0xc8100550 0x0 0x10>;
|
||||
clocks = <&xtal>,
|
||||
<&clkc CLKID_VID_PLL>,
|
||||
/*the clock source is not supported now*/
|
||||
<&clkc CLKID_FCLK_DIV4>,
|
||||
<&clkc CLKID_FCLK_DIV3>;
|
||||
clock-names = "xtal",
|
||||
"vid_pll_clk",
|
||||
"fclk_div4",
|
||||
"fclk_div3";
|
||||
clock-select = <XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,
|
||||
<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>;
|
||||
clock-select-new = <XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,
|
||||
<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,
|
||||
<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,
|
||||
<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>,<XTAL_CLK>;
|
||||
/*all channels use the default clock source XTAL_CLK*/
|
||||
/*and you can shoose it in file dt-bindings/pwm/meson.h*/
|
||||
};
|
||||
meson-fb {
|
||||
compatible = "amlogic, meson-fb";
|
||||
memory-region = <&fb_reserved>;
|
||||
dev_name = "meson-fb";
|
||||
status = "okay";
|
||||
interrupts = <0 3 1
|
||||
0 89 1>;
|
||||
interrupt-names = "viu-vsync", "rdma";
|
||||
mem_size = <0x01851000 0x00100000>; /* fb0/fb1 memory size */
|
||||
display_mode_default = "1080p60hz";
|
||||
scale_mode = <1>;
|
||||
/** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
|
||||
display_size_default = <1920 1080 1920 3240 32>;
|
||||
/*1920*1080*4*3 = 0x17BB000*/
|
||||
logo_addr = "0x3d851000";
|
||||
/*ion base + fb0 memory size for uboot logo osd1*/
|
||||
};
|
||||
ge2d {
|
||||
compatible = "amlogic, ge2d";
|
||||
dev_name = "ge2d";
|
||||
status = "okay";
|
||||
interrupts = <0 150 1>;
|
||||
interrupt-names = "ge2d";
|
||||
clocks = <&clkc CLKID_VAPB_MUX>,
|
||||
<&clkc CLKID_GE2D_GATE>,
|
||||
<&clkc CLKID_G2D>;
|
||||
clock-names = "clk_vapb_0",
|
||||
"clk_ge2d",
|
||||
"clk_ge2d_gate";
|
||||
};
|
||||
|
||||
rdma{
|
||||
compatible = "amlogic, meson, rdma";
|
||||
dev_name = "amlogic-rdma";
|
||||
status = "ok";
|
||||
interrupts = <0 89 1>;
|
||||
interrupt-names = "rdma";
|
||||
};
|
||||
|
||||
partitions: partitions{
|
||||
parts = <11>;
|
||||
part-0 = <&logo>;
|
||||
part-1 = <&recovery>;
|
||||
part-2 = <&rsv>;
|
||||
part-3 = <&tee>;
|
||||
part-4 = <&crypt>;
|
||||
part-5 = <&misc>;
|
||||
part-6 = <&instaboot>;
|
||||
part-7 = <&boot>;
|
||||
part-8 = <&system>;
|
||||
part-9 = <&cache>;
|
||||
part-10 = <&data>;
|
||||
|
||||
logo:logo{
|
||||
pname = "logo";
|
||||
size = <0x0 0x2000000>;
|
||||
mask = <1>;
|
||||
};
|
||||
recovery:recovery{
|
||||
pname = "recovery";
|
||||
size = <0x0 0x2000000>;
|
||||
mask = <1>;
|
||||
};
|
||||
rsv:rsv{
|
||||
pname = "rsv";
|
||||
size = <0x0 0x800000>;
|
||||
mask = <1>;
|
||||
};
|
||||
tee:tee{
|
||||
pname = "tee";
|
||||
size = <0x0 0x800000>;
|
||||
mask = <1>;
|
||||
};
|
||||
crypt:crypt{
|
||||
pname = "crypt";
|
||||
size = <0x0 0x2000000>;
|
||||
mask = <1>;
|
||||
};
|
||||
misc:misc{
|
||||
pname = "misc";
|
||||
size = <0x0 0x2000000>;
|
||||
mask = <1>;
|
||||
};
|
||||
instaboot:instaboot{
|
||||
pname = "instaboot";
|
||||
size = <0x0 0x400000>;
|
||||
mask = <1>;
|
||||
};
|
||||
boot:boot
|
||||
{
|
||||
pname = "boot";
|
||||
size = <0x0 0x2000000>;
|
||||
mask = <1>;
|
||||
};
|
||||
system:system
|
||||
{
|
||||
pname = "system";
|
||||
size = <0x0 0x80000000>;
|
||||
mask = <1>;
|
||||
};
|
||||
cache:cache
|
||||
{
|
||||
pname = "cache";
|
||||
size = <0x0 0x20000000>;
|
||||
mask = <2>;
|
||||
};
|
||||
data:data
|
||||
{
|
||||
pname = "data";
|
||||
size = <0xffffffff 0xffffffff>;
|
||||
mask = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
&efuse {
|
||||
status = "ok";
|
||||
};
|
||||
Reference in New Issue
Block a user