UPSTREAM: clk: rockchip: rk3036: rename emac ext source clock

There is only support rmii in the RK3036, so we should use the correct
ext clock name as described in the TRM.

Change-Id: Idf1ba727690f364f7705f15a8dac1b570c773044
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
[update dt-binding document as well]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
(cherry picked from git.kernel.org next/linux-next.git master
 commit 01b4557d30e95c64cfdc96025e75207647524ec2)

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

@@ -0,0 +1,56 @@
+* Rockchip RK3036 Clock and Reset Unit
+
+The RK3036 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3036-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "rmii_clkin" - external EMAC clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@20060000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};

drivers/clk/rockchip/clk-rk3036.c

@@ -136,7 +136,7 @@ PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
 PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
-PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
+PNAME(mux_mac_p)	= { "mac_pll_src", "rmii_clkin" };
 PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_cru" };
 
 static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {