diff --git a/Documentation/devicetree/bindings/video/rockchip_fb.txt b/Documentation/devicetree/bindings/video/rockchip_fb.txt
deleted file mode 100755
index 4b86bb657086..000000000000
--- a/Documentation/devicetree/bindings/video/rockchip_fb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Rockchip framebuffer.
- 
-Required properties:
-- compatible: value should be "rockchip,rk-fb".
-- rockchip,disp-mode: DUAL :for dual lcdc and dual display;
-					  ONE_DUAL : for one lcdc and dual display.
-
-Example:
-
-DT entry:
-	fb: fb{
-		compatible = "rockchip,rk-fb";
-		rockchip,disp-mode = <DUAL>;
-	};
- 
-Device-Tree bindings for RockChip screen driver
-
-Required properties:
-- compatible: value should be "rockchip,screen"
-- display-timings: value should be disp_timings, which defined in
-		lcd-xxx.dtsi file,the file should include by your board dts
-
-Example:
-	creen: rk_screen{
-                        compatible = "rockchip,screen";
-			display-timings = <&disp_timings>;
-        };
-
-/*
- * RockChip. LCD_B101ew05 lcd-b101ew05.dtsi
- *
- */
-
-/ {
-
-                disp_timings: display-timings {
-                        native-mode = <&timing0>;
-                        timing0: timing0 {
-                                screen-type = <SCREEN_LVDS>;
-                                lvds-format = <LVDS_8BIT_2>;
-                                out-face    = <OUT_D888_P666>;
-                                clock-frequency = <71000000>;
-                                hactive = <1280>;
-                                vactive = <800>;
-                                hback-porch = <100>;
-                                hfront-porch = <18>;
-                                vback-porch = <8>;
-                                vfront-porch = <6>;
-                                hsync-len = <10>;
-                                vsync-len = <2>;
-                                hsync-active = <0>;
-                                vsync-active = <0>;
-                                de-active = <0>;
-                                pixelclk-active = <0>;
-                                swap-rb = <0>;
-                                swap-rg = <0>;
-                                swap-gb = <0>;
-                        };
-               };
-};
-
-
-
-
-note: reference for display-timing.txt for display-timing bindings
diff --git a/Documentation/devicetree/bindings/video/rockchip_lcdc.txt b/Documentation/devicetree/bindings/video/rockchip_lcdc.txt
deleted file mode 100755
index acf879042ab2..000000000000
--- a/Documentation/devicetree/bindings/video/rockchip_lcdc.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Device-Tree bindings for Rockchip SoC display controller (VOP / LCDC)
-VOP (Video Output Process) / LCDC is the Display Controller for the
-ROCKCHIP series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3288-lcdc"; /* for RK3288 SoCs */
-		"rockchip,rk3368-lcdc"; /* for RK3368 SoCs */
-		"rockchip,rk322x-lcdc"; /* for RK322X SoCs */
-		"rockchip,rk3399-lcdc"; /* for RK3399 SoCs */
-- rockchip,prop: set the lcdc as primary or extend display.
-- rochchip,pwr18: set the controller IO voltage,0 is 3.3v,1 is 1.8v.
-- reg: physical base address and length of the LCDC registers set.
-- interrupts: interrupt number to the cpu and interrupt proterties.
-- pinctrl-names: must contain a "default" entry.
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-1: pin control group to be used for gpio.
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-               property..
-
-Optional Properties:
-- rockchip,debug: printk debug message.
-- rockchip,mirror: the lcdc mirror function.
-- lcd_en:lcd_en: contain power control for lcd.
-	- rockchip,power_type: power type,GPIO or REGULATOR.
-	- gpios: pin number for gpio.
-	- rockchip,delay: delay time after set power.
-
-Example:
-
-SoC specific DT entry:
-	lcdc1: lcdc@ff940000 {
-		compatible = "rockchip,rk3288-lcdc";
-		rockchip,prop = <PRMRY>;
-		rochchip,pwr18 = <0>;
-		reg = <0xff940000 0x10000>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		pinctrl-names = "default", "gpio";
-		pinctrl-0 = <&lcdc0_lcdc>;
-		pinctrl-1 = <&lcdc0_gpio>;		
-		status = "disabled";
-		clocks = <&clk_gates15 7>, <&dclk_lcdc1>, <&clk_gates15 8>, <&pd_vop1>;
-		clock-names = "aclk_lcdc", "dclk_lcdc", "hclk_lcdc", "pd_lcdc";
-	};
-
-
-Board specific DT entry:
-
-&lcdc1 {
-	status = "okay";
-	power_ctr: power_ctr {
-		rockchip,debug = <0>;
-		rockchip,mirror = <NO_MIRROR>;
-		lcd_en:lcd_en {
-			rockchip,power_type = <GPIO>;
-			gpios = <&gpio7 GPIO_A3 GPIO_ACTIVE_HIGH>;
-			rockchip,delay = <10>;
-		};	
-		lcd_cs:lcd_cs {
-			rockchip,power_type = <GPIO>;
-			gpios = <&gpio7 GPIO_A4 GPIO_ACTIVE_HIGH>;
-			rockchip,delay = <10>;
-		};
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/video/rockchip_lvds.txt b/Documentation/devicetree/bindings/video/rockchip_lvds.txt
deleted file mode 100644
index d7f6f08b2cdf..000000000000
--- a/Documentation/devicetree/bindings/video/rockchip_lvds.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-The Rockchip display port interface should be configured based on
-the type of panel connected to it.
- 
-Required properties:
-- compatible: value should be "rockchip,rk32-lvds".
-- reg: physical base address and length of the LVDS registers set.
-- interrupts: interrupt number to the cpu and interrupt proterties.
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-               property..
-
-Example:
-
-SoC specific DT entry:
-	lvds: lvds@ff96c000 {
-		compatible = "rockchip,rk32-lvds";
-		reg = <0xff96c000 0x4000>;
-		clocks = <&clk_gates16 7>;
-		clock-names = "pclk_lvds";
-        };
-