diff --git a/arch/arm64/boot/dts/amlogic/g12a_skt.dts b/arch/arm64/boot/dts/amlogic/g12a_skt.dts
index 8343cb3dcd37..dfdf231eeb39 100644
--- a/arch/arm64/boot/dts/amlogic/g12a_skt.dts
+++ b/arch/arm64/boot/dts/amlogic/g12a_skt.dts
@@ -34,6 +34,8 @@
 		serial2 = &uart_B;
 		serial3 = &uart_C;
 		serial4 = &uart_AO_B;
+		tsensor0 = &p_tsensor;
+		tsensor1 = &d_tsensor;
 	};
 
 	memory@00000000 {
@@ -1271,6 +1273,86 @@
 
 		status = "okay";
 	 };
+
+	meson_cooldev: meson-cooldev@0 {
+			status = "okay";
+			compatible = "amlogic, meson-cooldev";
+			device_name = "mcooldev";
+			cooling_devices {
+				cpucore_cool_cluster0 {
+					min_state = <1>;
+					dyn_coeff = <0>;
+					cluster_id = <0>;
+					node_name = "cpucore_cool0";
+					device_type = "cpucore";
+				};
+			};
+			cpucore_cool0:cpucore_cool0 {
+				#cooling-cells = <2>; /* min followed by max */
+			};
+		};
+		/*meson cooling devices end*/
+
+	thermal-zones {
+		soc_thermal: soc_thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			sustainable-power = <1050>;
+			thermal-sensors = <&p_tsensor 0>;
+			trips {
+				switch_on: trip-point@0 {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				control: trip-point@1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				hot: trip-point@2 {
+					temperature = <85000>;
+					hysteresis = <3000>;
+					type = "hot";
+				};
+				critical: trip-point@3 {
+					temperature = <150000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+		ddr_thermal: ddr_thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			sustainable-power = <1050>;
+			thermal-sensors = <&d_tsensor 1>;
+			trips {
+				dswitch_on: trip-point@0 {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				dcontrol: trip-point@1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				dhot: trip-point@2 {
+					temperature = <85000>;
+					hysteresis = <3000>;
+					type = "hot";
+				};
+				dcritical: trip-point@3 {
+					temperature = <150000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+		};
+	};
+	/*thermal zone end*/
 }; /* end of / */
 
 &pwm_AO_cd {
diff --git a/arch/arm64/boot/dts/amlogic/mesong12a.dtsi b/arch/arm64/boot/dts/amlogic/mesong12a.dtsi
index c5cdacfcad39..986f4676a8a2 100644
--- a/arch/arm64/boot/dts/amlogic/mesong12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/mesong12a.dtsi
@@ -331,6 +331,42 @@
 		reg = <0x0 0xff809000 0x0 0x48>;
 	};
 
+	p_tsensor: p_tsensor@ff634594 {
+		compatible = "amlogic, r1p1-tsensor";
+		device_name = "meson-pthermal";
+		status = "okay";
+		reg = <0x0 0xff634800 0x0 0x50>,
+			<0x0 0xff800268 0x0 0x4>;
+		cal_type = <0x1>;
+		cal_a = <324>;
+		cal_b = <424>;
+		cal_c = <3159>;
+		cal_d = <9411>;
+		rtemp = <130000>;
+		interrupts = <0 35 0>;
+		clocks = <&clkc CLKID_TS_COMP>; /* CLKID_TS_COMP>;*/
+		clock-names = "ts_comp";
+		#thermal-sensor-cells = <1>;
+	};
+
+	d_tsensor: d_tsensor@ff800228 {
+		compatible = "amlogic, r1p1-tsensor";
+		device_name = "meson-dthermal";
+		status = "okay";
+		reg = <0x0 0xff634c00 0x0 0x50>,
+			<0x0 0xff800230 0x0 0x4>;
+		cal_type = <0x1>;
+		cal_a = <324>;
+		cal_b = <424>;
+		cal_c = <3159>;
+		cal_d = <9411>;
+		rtemp = <130000>;
+		interrupts = <0 36 0>;
+		clocks = <&clkc CLKID_TS_COMP>; /* CLKID_TS_COMP>;*/
+		clock-names = "ts_comp";
+		#thermal-sensor-cells = <1>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;