From ae682e5eabb549288741a2203149e553dd319843 Mon Sep 17 00:00:00 2001
From: Zefa Chen <zefa.chen@rock-chips.com>
Date: Thu, 28 Mar 2019 14:01:00 +0800
Subject: [PATCH] dt-bindings: Document add gc2385

Change-Id: Ia1fe62499581614f7598d8b4228456fc3a2190f5
Signed-off-by: Zefa Chen <zefa.chen@rock-chips.com>
---
 .../devicetree/bindings/media/i2c/gc2385.txt  | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/gc2385.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/gc2385.txt b/Documentation/devicetree/bindings/media/i2c/gc2385.txt
new file mode 100644
index 000000000000..da74cfa92590
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/gc2385.txt
@@ -0,0 +1,44 @@
+* GalaxyCore GC2385 MIPI sensor
+
+Required Properties:
+- compatible: should be "galaxycore,gc2385"
+- clocks: reference to the 24M xvclk input clock.
+- clock-names: should be "xvclk".
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dvdd-supply: Digital core voltage supply, 1.2 volts
+- reset-gpios: Low active reset gpio
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+//rk3399 evb board
+&i2c1 {
+	status = "okay";
+	gc2385: gc2385@37 {
+		compatible = "galaxycore,gc2385";
+		status = "okay";
+		reg = <0x37>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		clock-names = "xvclk";
+
+		//reset pin control by hardware,used this pin switch to mipi input
+		//1->mipi input, 0->hdmi in
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "rockchip,camera_default";
+		pinctrl-0 = <&cif_clkout>;
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+		rockchip,camera-module-name = "RK-CMK-2M-2-v1";
+		rockchip,camera-module-lens-name = "TL0534-2";
+		port {
+			ucam_out0: endpoint {
+				remote-endpoint = <&mipi_in_ucam0>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};