From 58f4fbe6d6cfb4e4daeb740da02d1e50b20e091b Mon Sep 17 00:00:00 2001 From: Boon Khai Ng Date: Wed, 12 Mar 2025 11:05:44 +0800 Subject: [PATCH 01/10] USB: serial: ftdi_sio: add support for Altera USB Blaster 3 commit 18e0885bd2ca738407036434418a26a58394a60e upstream. The Altera USB Blaster 3, available as both a cable and an on-board solution, is primarily used for programming and debugging FPGAs. It interfaces with host software such as Quartus Programmer, System Console, SignalTap, and Nios Debugger. The device utilizes either an FT2232 or FT4232 chip. Enabling the support for various configurations of the on-board USB Blaster 3 by including the appropriate VID/PID pairs, allowing it to function as a serial device via ftdi_sio. Note that this check-in does not include support for the cable solution, as it does not support UART functionality. The supported configurations are determined by the hardware design and include: 1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART 2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART 3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART 4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART 5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART 6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART 7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART 8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART These configurations allow for flexibility in how the USB Blaster 3 is used, depending on the specific needs of the hardware design. Signed-off-by: Boon Khai Ng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 14 ++++++++++++++ drivers/usb/serial/ftdi_sio_ids.h | 13 +++++++++++++ 2 files changed, 27 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 248cbc9c48fd..f1498b511a81 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1079,6 +1079,20 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, /* GMC devices */ { USB_DEVICE(GMC_VID, GMC_Z216C_PID) }, + /* Altera USB Blaster 3 */ + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6022_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6025_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 3) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6029_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 3) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602C_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) }, + { USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5ee60ba2a73c..52be47d684ea 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1612,3 +1612,16 @@ */ #define GMC_VID 0x1cd7 #define GMC_Z216C_PID 0x0217 /* GMC Z216C Adapter IR-USB */ + +/* + * Altera USB Blaster 3 (http://www.altera.com). + */ +#define ALTERA_VID 0x09fb +#define ALTERA_UB3_6022_PID 0x6022 +#define ALTERA_UB3_6025_PID 0x6025 +#define ALTERA_UB3_6026_PID 0x6026 +#define ALTERA_UB3_6029_PID 0x6029 +#define ALTERA_UB3_602A_PID 0x602a +#define ALTERA_UB3_602C_PID 0x602c +#define ALTERA_UB3_602D_PID 0x602d +#define ALTERA_UB3_602E_PID 0x602e From bb03a80e678ab4e0cb7deb0baf2d72868d128d2e Mon Sep 17 00:00:00 2001 From: Fabio Porcedda Date: Tue, 4 Mar 2025 10:19:38 +0100 Subject: [PATCH 02/10] USB: serial: option: add Telit Cinterion FE990B compositions commit 4981bb50392b7515b765da28cf8768ce624c2670 upstream. Add the following Telit Cinterion FE990B40 compositions: 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10b3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10b3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=28c2595e C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Reviewed-by: Daniele Palmas [ johan: use USB_DEVICE_AND_INTERFACE_INFO() and sort by protocol ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7ca07ba1a139..1b15f54bf0ed 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1388,6 +1388,22 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x30), /* Telit FE990B (rmnet) */ + .driver_info = NCTRL(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x30), /* Telit FE990B (MBIM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x30), /* Telit FE990B (RNDIS) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x30), /* Telit FE990B (ECM) */ + .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */ From 7dad5048107084d82dfacaa61887a7fe18f11d52 Mon Sep 17 00:00:00 2001 From: Fabio Porcedda Date: Tue, 4 Mar 2025 10:19:39 +0100 Subject: [PATCH 03/10] USB: serial: option: fix Telit Cinterion FE990A name commit 6232f0d8e100a26275bbd773fc56a60af2c95322 upstream. The correct name for FE990 is FE990A so use it in order to avoid confusion with FE990B. Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1b15f54bf0ed..b144ef17f865 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1368,13 +1368,13 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, From 61a9561642aada60088d490e2f6684dae60cc076 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 6 Mar 2025 11:44:41 +0100 Subject: [PATCH 04/10] USB: serial: option: match on interface class for Telit FN990B commit 9a665fe3d967fe46edb4fd2497c7a5cc2dac2f55 upstream. The device id entries for Telit FN990B ended up matching only on the interface protocol. While this works, the protocol is qualified by the interface class (and subclass) which should have been included. Switch to matching using USB_DEVICE_AND_INTERFACE_INFO() while keeping the entries sorted also by protocol for consistency. Link: https://lore.kernel.org/20250227110655.3647028-2-fabio.porcedda@gmail.com/ Cc: Fabio Porcedda Cc: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b144ef17f865..715738d70cbf 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1410,22 +1410,22 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x60) }, /* Telit FN990B (rmnet) */ - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x40) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x30), + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30), /* Telit FN990B (rmnet) */ .driver_info = NCTRL(5) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x60) }, /* Telit FN990B (MBIM) */ - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x40) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x30), + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30), /* Telit FN990B (MBIM) */ .driver_info = NCTRL(6) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x60) }, /* Telit FN990B (RNDIS) */ - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x40) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x30), + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x30), /* Telit FN990B (RNDIS) */ .driver_info = NCTRL(6) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x60) }, /* Telit FN990B (ECM) */ - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x40) }, - { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x30), + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x30), /* Telit FN990B (ECM) */ .driver_info = NCTRL(6) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x60) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), From ec52240622c4d218d0240079b7c1d3ec2328a9f4 Mon Sep 17 00:00:00 2001 From: Florent Revest Date: Mon, 10 Mar 2025 15:42:43 +0100 Subject: [PATCH 05/10] x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes commit e3e89178a9f4a80092578af3ff3c8478f9187d59 upstream. Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their CPU masks and unconditionally accesses per-CPU data for the first CPU of each mask. According to Documentation/admin-guide/mm/numaperf.rst: "Some memory may share the same node as a CPU, and others are provided as memory only nodes." Therefore, some node CPU masks may be empty and wouldn't have a "first CPU". On a machine with far memory (and therefore CPU-less NUMA nodes): - cpumask_of_node(nid) is 0 - cpumask_first(0) is CONFIG_NR_CPUS - cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an index that is 1 out of bounds This does not have any security implications since flashing microcode is a privileged operation but I believe this has reliability implications by potentially corrupting memory while flashing a microcode update. When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes a microcode update. I get the following splat: UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y index 512 is out of range for type 'unsigned long[512]' [...] Call Trace: dump_stack __ubsan_handle_out_of_bounds load_microcode_amd request_microcode_amd reload_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Change the loop to go over only NUMA nodes which have CPUs before determining whether the first CPU on the respective node needs microcode update. [ bp: Massage commit message, fix typo. ] Fixes: 7ff6edf4fef3 ("x86/microcode/AMD: Fix mixed steppings support") Signed-off-by: Florent Revest Signed-off-by: Borislav Petkov (AMD) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250310144243.861978-1-revest@chromium.org Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpu/microcode/amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 9a3092ec9b27..b8d6e616fc50 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -867,7 +867,7 @@ static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t siz return ret; } - for_each_node(nid) { + for_each_node_with_cpus(nid) { cpu = cpumask_first(cpumask_of_node(nid)); c = &cpu_data(cpu); From d2ab95b8c30016c6d8bfa904f9321ca1d4736ad6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 19 Feb 2025 18:02:39 +0200 Subject: [PATCH 06/10] drm/atomic: Filter out redundant DPMS calls MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit de93ddf88088f7624b589d0ff3af9effb87e8f3b upstream. Video players (eg. mpv) do periodic XResetScreenSaver() calls to keep the screen on while the video playing. The modesetting ddx plumbs these straight through into the kernel as DPMS setproperty ioctls, without any filtering whatsoever. When implemented via atomic these end up as empty commits on the crtc (which will nonetheless take one full frame), which leads to a dropped frame every time XResetScreenSaver() is called. Let's just filter out redundant DPMS property changes in the kernel to avoid this issue. v2: Explain the resulting commits a bit better (Sima) Document the behaviour in uapi docs (Sima) Cc: stable@vger.kernel.org Testcase: igt/kms_flip/flip-vs-dpms-on-nop Reviewed-by: Simona Vetter Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20250219160239.17502-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++ drivers/gpu/drm/drm_connector.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c index b620a0da2d02..55b78b027e09 100644 --- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -932,6 +932,10 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state, if (mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; + + if (connector->dpms == mode) + goto out; + connector->dpms = mode; crtc = connector->state->crtc; diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 3d18d840ef3b..e5c1572f720b 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -1100,6 +1100,10 @@ static const struct drm_prop_enum_list dp_colorspaces[] = { * callback. For atomic drivers the remapping to the "ACTIVE" property is * implemented in the DRM core. * + * On atomic drivers any DPMS setproperty ioctl where the value does not + * change is completely skipped, otherwise a full atomic commit will occur. + * On legacy drivers the exact behavior is driver specific. + * * Note that this property cannot be set through the MODE_ATOMIC ioctl, * userspace must use "ACTIVE" on the CRTC instead. * From e8aeee0d12ac23903063ec7f200c5a1f1784e86d Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 7 Mar 2025 20:31:52 +0200 Subject: [PATCH 07/10] drm/dp_mst: Fix locking when skipping CSN before topology probing commit 12d8f318347b1d4feac48e8ac351d3786af39599 upstream. The handling of the MST Connection Status Notify message is skipped if the probing of the topology is still pending. Acquiring the drm_dp_mst_topology_mgr::probe_lock for this in drm_dp_mst_handle_up_req() is problematic: the task/work this function is called from is also responsible for handling MST down-request replies (in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() - holding already probe_lock - could be blocked waiting for an MST down-request reply while drm_dp_mst_handle_up_req() is waiting for probe_lock while processing a CSN message. This leads to the probe work's down-request message timing out. A scenario similar to the above leading to a down-request timeout is handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the probe_lock and sending down-request messages while a second CSN message sent by the sink subsequently is handled by drm_dp_mst_handle_up_req(). Fix the above by moving the logic to skip the CSN handling to drm_dp_mst_process_up_req(). This function is called from a work (separate from the task/work handling new up/down messages), already holding probe_lock. This solves the above timeout issue, since handling of down-request replies won't be blocked by probe_lock. Fixes: ddf983488c3e ("drm/dp_mst: Skip CSN if topology probing is not done yet") Cc: Wayne Lin Cc: Lyude Paul Cc: stable@vger.kernel.org # v6.6+ Reviewed-by: Wayne Lin Reviewed-by: Lyude Paul Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/display/drm_dp_mst_topology.c | 40 +++++++++++-------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c index d8cbb4eadc5b..6f41c752844b 100644 --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c @@ -3959,6 +3959,22 @@ out: return 0; } +static bool primary_mstb_probing_is_done(struct drm_dp_mst_topology_mgr *mgr) +{ + bool probing_done = false; + + mutex_lock(&mgr->lock); + + if (mgr->mst_primary && drm_dp_mst_topology_try_get_mstb(mgr->mst_primary)) { + probing_done = mgr->mst_primary->link_address_sent; + drm_dp_mst_topology_put_mstb(mgr->mst_primary); + } + + mutex_unlock(&mgr->lock); + + return probing_done; +} + static inline bool drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_pending_up_req *up_req) @@ -3989,8 +4005,12 @@ drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr, /* TODO: Add missing handler for DP_RESOURCE_STATUS_NOTIFY events */ if (msg->req_type == DP_CONNECTION_STATUS_NOTIFY) { - dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat); - hotplug = true; + if (!primary_mstb_probing_is_done(mgr)) { + drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it.\n"); + } else { + dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat); + hotplug = true; + } } drm_dp_mst_topology_put_mstb(mstb); @@ -4069,10 +4089,11 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr) drm_dp_send_up_ack_reply(mgr, mst_primary, up_req->msg.req_type, false); + drm_dp_mst_topology_put_mstb(mst_primary); + if (up_req->msg.req_type == DP_CONNECTION_STATUS_NOTIFY) { const struct drm_dp_connection_status_notify *conn_stat = &up_req->msg.u.conn_stat; - bool handle_csn; drm_dbg_kms(mgr->dev, "Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n", conn_stat->port_number, @@ -4081,16 +4102,6 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr) conn_stat->message_capability_status, conn_stat->input_port, conn_stat->peer_device_type); - - mutex_lock(&mgr->probe_lock); - handle_csn = mst_primary->link_address_sent; - mutex_unlock(&mgr->probe_lock); - - if (!handle_csn) { - drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it."); - kfree(up_req); - goto out_put_primary; - } } else if (up_req->msg.req_type == DP_RESOURCE_STATUS_NOTIFY) { const struct drm_dp_resource_status_notify *res_stat = &up_req->msg.u.resource_stat; @@ -4105,9 +4116,6 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr) list_add_tail(&up_req->next, &mgr->up_req_list); mutex_unlock(&mgr->up_req_lock); queue_work(system_long_wq, &mgr->up_req_work); - -out_put_primary: - drm_dp_mst_topology_put_mstb(mst_primary); out_clear_reply: memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx)); return 0; From 889e55f2fa2f6c93df9bb54398d1096302047471 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Sun, 23 Feb 2025 00:04:35 -0600 Subject: [PATCH 08/10] drm/amd/display: Restore correct backlight brightness after a GPU reset commit 5760388d9681ac743038b846b9082b9023969551 upstream. [Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin Signed-off-by: Mario Limonciello Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 5e19e2b57b6bb640d68dfc7991e1e182922cf867) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 8dc0f70df24f..9b3f5f76d52d 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -230,6 +230,10 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector); static void handle_hpd_rx_irq(void *param); +static void amdgpu_dm_backlight_set_level(struct amdgpu_display_manager *dm, + int bl_idx, + u32 user_brightness); + static bool is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state, struct drm_crtc_state *new_crtc_state); @@ -2885,6 +2889,12 @@ static int dm_resume(void *handle) mutex_unlock(&dm->dc_lock); + /* set the backlight after a reset */ + for (i = 0; i < dm->num_of_edps; i++) { + if (dm->backlight_dev[i]) + amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]); + } + return 0; } /* Recreate dc_state - DC invalidates it when setting power state to S3. */ From dc831b38680c47d07e425871a9852109183895cf Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Thu, 27 Feb 2025 16:36:25 -0700 Subject: [PATCH 09/10] drm/amd/display: Assign normalized_pix_clk when color depth = 14 commit 79e31396fdd7037c503e6add15af7cb00633ea92 upstream. [WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. Reviewed-by: Harry Wentland Signed-off-by: Alex Hung Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 87a6d6a4ddf4..f036e9988a0d 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -2328,10 +2328,13 @@ static int get_norm_pix_clk(const struct dc_crtc_timing *timing) break; case COLOR_DEPTH_121212: normalized_pix_clk = (pix_clk * 36) / 24; - break; + break; + case COLOR_DEPTH_141414: + normalized_pix_clk = (pix_clk * 42) / 24; + break; case COLOR_DEPTH_161616: normalized_pix_clk = (pix_clk * 48) / 24; - break; + break; default: ASSERT(0); break; From 4964dbc4191ab436877a5e3ecd9c67a4e50b7c36 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Fri, 28 Feb 2025 13:18:14 -0600 Subject: [PATCH 10/10] drm/amd/display: Fix slab-use-after-free on hdcp_work commit e65e7bea220c3ce8c4c793b4ba35557f4994ab2b upstream. [Why] A slab-use-after-free is reported when HDCP is destroyed but the property_validate_dwork queue is still running. [How] Cancel the delayed work when destroying workqueue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query") Cc: Alex Deucher Reviewed-by: Alex Hung Signed-off-by: Mario Limonciello Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c index 6202e31c7e3a..3f211c0308a2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c @@ -404,6 +404,7 @@ void hdcp_destroy(struct kobject *kobj, struct hdcp_workqueue *hdcp_work) for (i = 0; i < hdcp_work->max_link; i++) { cancel_delayed_work_sync(&hdcp_work[i].callback_dwork); cancel_delayed_work_sync(&hdcp_work[i].watchdog_timer_dwork); + cancel_delayed_work_sync(&hdcp_work[i].property_validate_dwork); } sysfs_remove_bin_file(kobj, &hdcp_work[0].attr);