From b8c9ab7fc2aa25430342a338e4b11bc912f9c5a5 Mon Sep 17 00:00:00 2001 From: Nan Li Date: Wed, 20 Nov 2019 18:44:59 +0800 Subject: [PATCH] sd: optimize sd_uart jtag pin cfg [1/1] PD#SWPL-17140 Problem: sd_uart jtag pin cfg error. Solution: modify sd_uart jtag pin dts cfgs. Verify: sm1 Change-Id: I66a2f147110e48d53bd2fa08ac3860426ffd1e7d Signed-off-by: Nan Li --- arch/arm/boot/dts/amlogic/mesong12a.dtsi | 4 +- arch/arm/boot/dts/amlogic/mesong12b.dtsi | 2 +- arch/arm/boot/dts/amlogic/mesong12b_a.dtsi | 2 +- arch/arm/boot/dts/amlogic/mesonsm1.dtsi | 2 +- arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts | 1820 ----------------- .../boot/dts/amlogic/tl1_t962x2_x301_1g.dts | 2 +- .../dts/amlogic/tl1_t962x2_x301_1g_drm.dts | 2 +- .../dts/amlogic/tl1_t962x2_x301_2g_drm.dts | 2 +- arch/arm64/boot/dts/amlogic/mesong12a.dtsi | 4 +- arch/arm64/boot/dts/amlogic/mesong12b.dtsi | 2 +- arch/arm64/boot/dts/amlogic/mesong12b_a.dtsi | 2 +- arch/arm64/boot/dts/amlogic/mesonsm1.dtsi | 2 +- .../boot/dts/amlogic/tl1_t962x2_x301_1g.dts | 2 +- .../dts/amlogic/tl1_t962x2_x301_1g_drm.dts | 2 +- .../boot/dts/amlogic/tl1_t962x2_x301_2g.dts | 2 +- .../dts/amlogic/tl1_t962x2_x301_2g_drm.dts | 2 +- 16 files changed, 17 insertions(+), 1837 deletions(-) delete mode 100644 arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts diff --git a/arch/arm/boot/dts/amlogic/mesong12a.dtsi b/arch/arm/boot/dts/amlogic/mesong12a.dtsi index ab4a9f74afdc..e45d51e92686 100644 --- a/arch/arm/boot/dts/amlogic/mesong12a.dtsi +++ b/arch/arm/boot/dts/amlogic/mesong12a.dtsi @@ -1435,7 +1435,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), @@ -1504,7 +1504,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm/boot/dts/amlogic/mesong12b.dtsi b/arch/arm/boot/dts/amlogic/mesong12b.dtsi index 469619754bec..74053f2a295f 100644 --- a/arch/arm/boot/dts/amlogic/mesong12b.dtsi +++ b/arch/arm/boot/dts/amlogic/mesong12b.dtsi @@ -1536,7 +1536,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm/boot/dts/amlogic/mesong12b_a.dtsi b/arch/arm/boot/dts/amlogic/mesong12b_a.dtsi index f644663c22d5..a1f4ef0e558f 100644 --- a/arch/arm/boot/dts/amlogic/mesong12b_a.dtsi +++ b/arch/arm/boot/dts/amlogic/mesong12b_a.dtsi @@ -1497,7 +1497,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm/boot/dts/amlogic/mesonsm1.dtsi b/arch/arm/boot/dts/amlogic/mesonsm1.dtsi index 5ce0ad55bacd..e6c859db5c09 100644 --- a/arch/arm/boot/dts/amlogic/mesonsm1.dtsi +++ b/arch/arm/boot/dts/amlogic/mesonsm1.dtsi @@ -1546,7 +1546,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts deleted file mode 100644 index 8723470da535..000000000000 --- a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts +++ /dev/null @@ -1,1820 +0,0 @@ -/* - * arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts - * - * Copyright (C) 2018 Amlogic, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - -/dts-v1/; - -#include "mesontl1.dtsi" -#include "partition_mbox_normal_P_32.dtsi" -#include "mesontl1_skt-panel.dtsi" - -/ { - model = "Amlogic TL1 T962X2 X301"; - amlogic-dt-id = "tl1_t962x2_x301"; - compatible = "amlogic, tl1_t962x2_x301"; - - aliases { - serial0 = &uart_AO; - serial1 = &uart_A; - serial2 = &uart_B; - serial3 = &uart_C; - serial4 = &uart_AO_B; - tsensor0 = &p_tsensor; - tsensor1 = &d_tsensor; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c_AO; - }; - - memory@00000000 { - device_type = "memory"; - linux,usable-memory = <0x0 0x80000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - /* global autoconfigured region for contiguous allocations */ - secmon_reserved: linux,secmon { - compatible = "shared-dma-pool"; - reusable; - size = <0x400000>; - alignment = <0x400000>; - alloc-ranges = <0x05000000 0x400000>; - }; - - codec_mm_cma:linux,codec_mm_cma { - compatible = "shared-dma-pool"; - reusable; - /* ion_codec_mm max can alloc size 80M*/ - size = <0x13400000>; - alignment = <0x400000>; - linux,contiguous-region; - alloc-ranges = <0x12000000 0x13400000>; - }; - - /* codec shared reserved */ - codec_mm_reserved:linux,codec_mm_reserved { - compatible = "amlogic, codec-mm-reserved"; - size = <0x0>; - alignment = <0x100000>; - //no-map; - }; - - logo_reserved:linux,meson-fb { - compatible = "shared-dma-pool"; - reusable; - size = <0x800000>; - alignment = <0x400000>; - alloc-ranges = <0x7f800000 0x800000>; - }; - - ion_cma_reserved:linux,ion-dev { - compatible = "shared-dma-pool"; - reusable; - size = <0x8000000>; - alignment = <0x400000>; - }; - - /* vdin0 CMA pool */ - //vdin0_cma_reserved:linux,vdin0_cma { - // compatible = "shared-dma-pool"; - // reusable; - /* 3840x2160x4x4 ~=128 M */ - // size = <0xc400000>; - // alignment = <0x400000>; - //}; - - /* vdin1 CMA pool */ - vdin1_cma_reserved:linux,vdin1_cma { - compatible = "shared-dma-pool"; - reusable; - /* 1920x1080x2x4 =16 M */ - size = <0x1400000>; - alignment = <0x400000>; - }; - - /* for hdmi rx emp use */ - hdmirx_emp_cma_reserved:linux,emp_cma { - compatible = "shared-dma-pool"; - /*linux,phandle = <5>;*/ - reusable; - /* 4M for emp to ddr */ - /* 32M for tmds to ddr */ - size = <0x2000000>; - alignment = <0x400000>; - /* alloc-ranges = <0x400000 0x2000000>; */ - }; - - /* POST PROCESS MANAGER */ - ppmgr_reserved:linux,ppmgr { - compatible = "amlogic, ppmgr_memory"; - size = <0x0>; - }; - }; /* end of reserved-memory */ - - codec_mm { - compatible = "amlogic, codec, mm"; - status = "okay"; - memory-region = <&codec_mm_cma &codec_mm_reserved>; - }; - - ppmgr { - compatible = "amlogic, ppmgr"; - memory-region = <&ppmgr_reserved>; - status = "okay"; - }; - - vout { - compatible = "amlogic, vout"; - status = "okay"; - fr_auto_policy = <0>; - }; - - /* Audio Related start */ - pdm_codec:dummy { - #sound-dai-cells = <0>; - compatible = "amlogic, pdm_dummy_codec"; - status = "okay"; - }; - - dummy_codec:dummy { - #sound-dai-cells = <0>; - compatible = "amlogic, aml_dummy_codec"; - status = "okay"; - }; - - tl1_codec:codec { - #sound-dai-cells = <0>; - compatible = "amlogic, tl1_acodec"; - status = "okay"; - reg = <0xff632000 0x1c>; - tdmout_index = <0>; - tdmin_index = <0>; - dat1_ch_sel = <1>; - }; - - auge_sound { - compatible = "amlogic, tl1-sound-card"; - aml-audio-card,name = "AML-AUGESOUND"; - - avout_mute-gpios = <&gpio GPIODV_3 GPIO_ACTIVE_HIGH>; - - aml-audio-card,dai-link@0 { - format = "i2s"; - mclk-fs = <256>; - continuous-clock; - //bitclock-inversion; - //frame-inversion; - /* master mode */ - bitclock-master = <&tdma>; - frame-master = <&tdma>; - /* slave mode */ - /* - * bitclock-master = <&tdmacodec>; - * frame-master = <&tdmacodec>; - */ - /* suffix-name, sync with android audio hal used for */ - suffix-name = "alsaPORT-i2s"; - tdmacpu: cpu { - sound-dai = <&tdma>; - dai-tdm-slot-tx-mask = - <1 1>; - dai-tdm-slot-rx-mask = - <1 1>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - system-clock-frequency = <12288000>; - }; - tdmacodec: codec { - //sound-dai = <&dummy_codec>; - prefix-names = "AMP"; - sound-dai = <&ad82584f &tl1_codec>; - }; - }; - - aml-audio-card,dai-link@1 { - status = "disabled"; - - format = "i2s"; - mclk-fs = <256>; - //continuous-clock; - //bitclock-inversion; - //frame-inversion; - /* master mode */ - bitclock-master = <&tdmb>; - frame-master = <&tdmb>; - /* slave mode */ - //bitclock-master = <&tdmbcodec>; - //frame-master = <&tdmbcodec>; - /* suffix-name, sync with android audio hal used for */ - suffix-name = "alsaPORT-pcm"; - cpu { - sound-dai = <&tdmb>; - dai-tdm-slot-tx-mask = <1 1>; - dai-tdm-slot-rx-mask = <1 1>; - dai-tdm-slot-num = <2>; - /* - * dai-tdm-slot-tx-mask = - * <1 1 1 1 1 1 1 1>; - * dai-tdm-slot-rx-mask = - * <1 1 1 1 1 1 1 1>; - * dai-tdm-slot-num = <8>; - */ - dai-tdm-slot-width = <32>; - system-clock-frequency = <12288000>; - }; - tdmbcodec: codec { - sound-dai = <&dummy_codec>; - }; - }; - - aml-audio-card,dai-link@2 { - status = "disabled"; - - format = "i2s"; - mclk-fs = <256>; - //continuous-clock; - //bitclock-inversion; - //frame-inversion; - /* master mode */ - bitclock-master = <&tdmc>; - frame-master = <&tdmc>; - /* slave mode */ - //bitclock-master = <&tdmccodec>; - //frame-master = <&tdmccodec>; - /* suffix-name, sync with android audio hal used for */ - //suffix-name = "alsaPORT-tdm"; - cpu { - sound-dai = <&tdmc>; - dai-tdm-slot-tx-mask = <1 1>; - dai-tdm-slot-rx-mask = <1 1>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - system-clock-frequency = <12288000>; - }; - tdmccodec: codec { - sound-dai = <&dummy_codec>; - }; - }; - - aml-audio-card,dai-link@3 { - mclk-fs = <64>; - /* suffix-name, sync with android audio hal used for */ - suffix-name = "alsaPORT-pdm"; - cpu { - sound-dai = <&pdm>; - }; - codec { - sound-dai = <&pdm_codec>; - }; - }; - - aml-audio-card,dai-link@4 { - mclk-fs = <128>; - continuous-clock; - /* suffix-name, sync with android audio hal used for */ - suffix-name = "alsaPORT-spdif"; - cpu { - sound-dai = <&spdifa>; - system-clock-frequency = <6144000>; - }; - codec { - sound-dai = <&dummy_codec>; - }; - }; - - aml-audio-card,dai-link@5 { - mclk-fs = <128>; - cpu { - sound-dai = <&spdifb>; - system-clock-frequency = <6144000>; - }; - codec { - sound-dai = <&dummy_codec>; - }; - }; - - aml-audio-card,dai-link@6 { - mclk-fs = <256>; - suffix-name = "alsaPORT-tv"; - cpu { - sound-dai = <&extn>; - system-clock-frequency = <12288000>; - }; - codec { - sound-dai = <&dummy_codec>; - }; - }; - - aml-audio-card,dai-link@7 { - mclk-fs = <256>; - continuous-clock; - suffix-name = "alsaPORT-loopback"; - cpu { - sound-dai = <&loopbacka>; - system-clock-frequency = <12288000>; - }; - codec { - sound-dai = <&dummy_codec>; - }; - }; - }; - /* Audio Related end */ - - dvb { - compatible = "amlogic, dvb"; - status = "okay"; - fe0_mode = "internal"; - fe0_tuner = <&tuner>; - - /*"parallel","serial","disable"*/ - ts2 = "parallel"; - ts2_control = <0>; - ts2_invert = <0>; - interrupts = <0 23 1 - 0 5 1 - 0 53 1 - 0 19 1 - 0 25 1 - 0 17 1>; - interrupt-names = "demux0_irq", - "demux1_irq", - "demux2_irq", - "dvr0_irq", - "dvr1_irq", - "dvr2_irq"; - clocks = <&clkc CLKID_DEMUX - &clkc CLKID_ASYNC_FIFO - &clkc CLKID_AHB_ARB0 -/* &clkc CLKID_DOS_PARSER>;*/ - &clkc CLKID_U_PARSER>; - clock-names = "demux", "asyncfifo", "ahbarb0", "uparsertop"; - }; - - tvafe_avin_detect { - compatible = "amlogic, tl1_tvafe_avin_detect"; - status = "okay"; - device_mask = <1>;/*bit0:ch1;bit1:ch2*/ - interrupts = <0 12 1>, - <0 13 1>; - }; - - amlvecm { - compatible = "amlogic, vecm"; - dev_name = "aml_vecm"; - status = "okay"; - gamma_en = <1>;/*1:enabel ;0:disable*/ - wb_en = <1>;/*1:enabel ;0:disable*/ - cm_en = <1>;/*1:enabel ;0:disable*/ - wb_sel = <1>;/*1:mtx ;0:gainoff*/ - vlock_en = <1>;/*1:enable;0:disable*/ - vlock_mode = <0x4>; - /* vlock work mode: - *bit0:auto ENC - *bit1:auto PLL - *bit2:manual PLL - *bit3:manual ENC - *bit4:manual soft ENC - *bit5:manual MIX PLL ENC - */ - vlock_pll_m_limit = <1>; - vlock_line_limit = <3>; - }; - - vdin@0 { - compatible = "amlogic, vdin"; - /*memory-region = <&vdin0_cma_reserved>;*/ - status = "okay"; - /*bit0:(1:share with codec_mm;0:cma alone) - *bit8:(1:alloc in discontinus way;0:alone in continuous way) - */ - flag_cma = <0x101>; - /*MByte, if 10bit disable: 64M(YUV422), - *if 10bit enable: 64*1.5 = 96M(YUV422) - *if support 4K2K-YUV444-10bit-WR:3840*2160*4*4 ~= 128M - *if support 4K2K-YUV422-10bit-wr:3840*2160*3*4 ~= 96M - *if support 4K2K-YUV422-8BIT-WR:3840*2160*2*4 ~= 64M - *if support 1080p-YUV422-8BIT-WR:1920*1080*2*4 ~= 16M - */ - cma_size = <190>; - interrupts = <0 83 1>; - rdma-irq = <2>; - clocks = <&clkc CLKID_FCLK_DIV5>, - <&clkc CLKID_VDIN_MEAS_COMP>; - clock-names = "fclk_div5", "cts_vdin_meas_clk"; - vdin_id = <0>; - /*vdin write mem color depth support: - * bit0:support 8bit - * bit1:support 9bit - * bit2:support 10bit - * bit3:support 12bit - * bit4:support yuv422 10bit full pack mode (from txl new add) - * bit8:use 8bit at 4k_50/60hz_10bit - * bit9:use 10bit at 4k_50/60hz_10bit - */ - tv_bit_mode = <0x215>; - /* afbce_bit_mode: (amlogic frame buff compression encoder) - * 0: normal mode, not use afbce - * 1: use afbce non-mmu mode - * 2: use afbce mmu mode - */ - afbce_bit_mode = <0>; - }; - - vdin@1 { - compatible = "amlogic, vdin"; - memory-region = <&vdin1_cma_reserved>; - status = "okay"; - /*bit0:(1:share with codec_mm;0:cma alone) - *bit8:(1:alloc in discontinus way;0:alone in continuous way) - */ - flag_cma = <0>; - interrupts = <0 85 1>; - rdma-irq = <4>; - clocks = <&clkc CLKID_FCLK_DIV5>, - <&clkc CLKID_VDIN_MEAS_COMP>; - clock-names = "fclk_div5", "cts_vdin_meas_clk"; - vdin_id = <1>; - /*vdin write mem color depth support: - *bit0:support 8bit - *bit1:support 9bit - *bit2:support 10bit - *bit3:support 12bit - */ - tv_bit_mode = <0x15>; - }; - - tvafe { - compatible = "amlogic, tvafe-tl1"; - /*memory-region = <&tvafe_cma_reserved>;*/ - status = "okay"; - flag_cma = <1>;/*1:share with codec_mm;0:cma alone*/ - cma_size = <5>;/*MByte*/ - reg = <0xff654000 0x2000>;/*tvafe reg base*/ - reserve-iomap = "true"; - tvafe_id = <0>; - //pinctrl-names = "default"; - /*!!particular sequence, no more and no less!!!*/ - tvafe_pin_mux = < - 3 /* TVAFE_CVBS_IN2, CVBS_IN0 = 0 */ - 1 /* TVAFE_CVBS_IN0, CVBS_IN1 */ - 2 /* TVAFE_CVBS_IN1, CVBS_IN2 */ - 4 /* TVAFE_CVBS_IN3, CVBS_IN3 */ - >; - clocks = <&clkc CLKID_DAC_CLK>; - clock-names = "vdac_clk_gate"; - - cutwindow_val_h = <0 10 18 20 62>; /* level 0~4 */ - cutwindow_val_v = <4 8 14 16 24>; /* level 0~4 */ - }; - - vbi { - compatible = "amlogic, vbi"; - status = "okay"; - interrupts = <0 83 1>; - }; - - cvbsout { - compatible = "amlogic, cvbsout-tl1"; - status = "disabled"; - clocks = <&clkc CLKID_VCLK2_ENCI - &clkc CLKID_VCLK2_VENCI0 - &clkc CLKID_VCLK2_VENCI1 - &clkc CLKID_DAC_CLK>; - clock-names = "venci_top_gate", - "venci_0_gate", - "venci_1_gate", - "vdac_clk_gate"; - /* clk path */ - /* 0:vid_pll vid2_clk */ - /* 1:gp0_pll vid2_clk */ - /* 2:vid_pll vid1_clk */ - /* 3:gp0_pll vid1_clk */ - clk_path = <0>; - - /* performance: reg_address, reg_value */ - /* tl1 */ - performance = <0x1bf0 0x9 - 0x1b56 0x333 - 0x1b12 0x8080 - 0x1b05 0xfd - 0x1c59 0xf850 - 0xffff 0x0>; /* ending flag */ - performance_sarft = <0x1bf0 0x9 - 0x1b56 0x333 - 0x1b12 0x0 - 0x1b05 0x9 - 0x1c59 0xfc48 - 0xffff 0x0>; /* ending flag */ - performance_revB_telecom = <0x1bf0 0x9 - 0x1b56 0x546 - 0x1b12 0x8080 - 0x1b05 0x9 - 0x1c59 0xf850 - 0xffff 0x0>; /* ending flag */ - }; - - /* for external keypad */ - adc_keypad { - compatible = "amlogic, adc_keypad"; - status = "okay"; - key_name = "power","up","down","enter","left","right","home"; - key_num = <7>; - io-channels = <&saradc SARADC_CH2>,<&saradc SARADC_CH3>; - io-channel-names = "key-chan-2", "key-chan-3"; - key_chan = ; - key_code = <116 103 108 28 105 106 102>; - key_val = <0 143 266 389 512 143 266>; //val=voltage/1800mV*1023 - key_tolerance = <40 40 40 40 40 40 40>; - }; - - unifykey { - compatible = "amlogic, unifykey"; - status = "okay"; - - unifykey-num = <19>; - unifykey-index-0 = <&keysn_0>; - unifykey-index-1 = <&keysn_1>; - unifykey-index-2 = <&keysn_2>; - unifykey-index-3 = <&keysn_3>; - unifykey-index-4 = <&keysn_4>; - unifykey-index-5 = <&keysn_5>; - unifykey-index-6 = <&keysn_6>; - unifykey-index-7 = <&keysn_7>; - unifykey-index-8 = <&keysn_8>; - unifykey-index-9 = <&keysn_9>; - unifykey-index-10= <&keysn_10>; - unifykey-index-11 = <&keysn_11>; - unifykey-index-12 = <&keysn_12>; - unifykey-index-13 = <&keysn_13>; - unifykey-index-14 = <&keysn_14>; - unifykey-index-15 = <&keysn_15>; - unifykey-index-16 = <&keysn_16>; - unifykey-index-17 = <&keysn_17>; - unifykey-index-18 = <&keysn_18>; - - keysn_0: key_0{ - key-name = "usid"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_1:key_1{ - key-name = "mac"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_2:key_2{ - key-name = "hdcp"; - key-device = "secure"; - key-type = "sha1"; - key-permit = "read","write","del"; - }; - keysn_3:key_3{ - key-name = "secure_boot_set"; - key-device = "efuse"; - key-permit = "write"; - }; - keysn_4:key_4{ - key-name = "mac_bt"; - key-device = "normal"; - key-permit = "read","write","del"; - key-type = "mac"; - }; - keysn_5:key_5{ - key-name = "mac_wifi"; - key-device = "normal"; - key-permit = "read","write","del"; - key-type = "mac"; - }; - keysn_6:key_6{ - key-name = "hdcp2_tx"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_7:key_7{ - key-name = "hdcp2_rx"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_8:key_8{ - key-name = "widevinekeybox"; - key-device = "secure"; - key-type = "sha1"; - key-permit = "read","write","del"; - }; - keysn_9:key_9{ - key-name = "deviceid"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_10:key_10{ - key-name = "hdcp22_fw_private"; - key-device = "secure"; - key-permit = "read","write","del"; - }; - keysn_11:key_11{ - key-name = "hdcp22_rx_private"; - key-device = "secure"; - key-permit = "read","write","del"; - }; - keysn_12:key_12{ - key-name = "hdcp22_rx_fw"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_13:key_13{ - key-name = "hdcp14_rx"; - key-device = "normal"; - key-type = "sha1"; - key-permit = "read","write","del"; - }; - keysn_14:key_14{ - key-name = "prpubkeybox";// PlayReady - key-device = "secure"; - key-permit = "read","write","del"; - }; - keysn_15:key_15{ - key-name = "prprivkeybox";// PlayReady - key-device = "secure"; - key-permit = "read","write","del"; - }; - keysn_16:key_16{ - key-name = "lcd"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_17:key_17{ - key-name = "lcd_extern"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - keysn_18:key_18{ - key-name = "backlight"; - key-device = "normal"; - key-permit = "read","write","del"; - }; - }; /* End unifykey */ - - hdmirx { - compatible = "amlogic, hdmirx_tl1"; - #address-cells=<1>; - #size-cells=<1>; - memory-region = <&hdmirx_emp_cma_reserved>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmirx_a_mux &hdmirx_b_mux - &hdmirx_c_mux>; - repeat = <0>; - interrupts = <0 56 1>; - clocks = <&clkc CLKID_HDMIRX_MODET_COMP>, - <&clkc CLKID_HDMIRX_CFG_COMP>, - <&clkc CLKID_HDMIRX_ACR_COMP>, - <&clkc CLKID_HDMIRX_METER_COMP>, - <&xtal>, - <&clkc CLKID_FCLK_DIV5>, - <&clkc CLKID_FCLK_DIV7>, - <&clkc CLKID_HDCP22_SKP_COMP>, - <&clkc CLKID_HDCP22_ESM_COMP>; - // <&clkc CLK_AUD_PLL2FS>, - // <&clkc CLK_AUD_PLL4FS>, - // <&clkc CLK_AUD_OUT>; - clock-names = "hdmirx_modet_clk", - "hdmirx_cfg_clk", - "hdmirx_acr_ref_clk", - "cts_hdmirx_meter_clk", - "xtal", - "fclk_div5", - "fclk_div7", - "hdcp_rx22_skp", - "hdcp_rx22_esm"; - // "hdmirx_aud_pll2fs", - // "hdmirx_aud_pll4f", - // "clk_aud_out"; - hdmirx_id = <0>; - en_4k_2_2k = <0>; - hpd_low_cec_off = <1>; - /* bit4: enable feature, bit3~0: port number */ - disable_port = <0x0>; - /* MAP_ADDR_MODULE_CBUS */ - /* MAP_ADDR_MODULE_HIU */ - /* MAP_ADDR_MODULE_HDMIRX_CAPB3 */ - /* MAP_ADDR_MODULE_SEC_AHB */ - /* MAP_ADDR_MODULE_SEC_AHB2 */ - /* MAP_ADDR_MODULE_APB4 */ - /* MAP_ADDR_MODULE_TOP */ - reg = < 0x0 0x0 - 0xff63C000 0x2000 - 0xffe0d000 0x2000 - 0x0 0x0 - 0x0 0x0 - 0x0 0x0 - 0xff610000 0xa000>; - }; - - aocec: aocec { - compatible = "amlogic, aocec-tl1"; - /*device_name = "aocec";*/ - status = "okay"; - vendor_name = "Amlogic"; /* Max Chars: 8 */ - /* Refer to the following URL at: - * http://standards.ieee.org/develop/regauth/oui/oui.txt - */ - vendor_id = <0x000000>; - product_desc = "TL1"; /* Max Chars: 16 */ - cec_osd_string = "AML_TV"; /* Max Chars: 14 */ - port_num = <3>; - ee_cec; - arc_port_mask = <0x2>; - interrupts = <0 203 1 - 0 199 1>; - interrupt-names = "hdmi_aocecb","hdmi_aocec"; - pinctrl-names = "default","hdmitx_aocecb","cec_pin_sleep"; - pinctrl-0=<&aoceca_mux>; - pinctrl-1=<&aocecb_mux>; - pinctrl-2=<&aoceca_mux>; - reg = <0xFF80023c 0x4 - 0xFF800000 0x400>; - reg-names = "ao_exit","ao"; - }; - - p_tsensor: p_tsensor@ff634800 { - compatible = "amlogic, r1p1-tsensor"; - status = "okay"; - reg = <0xff634800 0x50>, - <0xff800268 0x4>; - cal_type = <0x1>; - cal_a = <324>; - cal_b = <424>; - cal_c = <3159>; - cal_d = <9411>; - rtemp = <115000>; - interrupts = <0 35 0>; - clocks = <&clkc CLKID_TS_CLK_COMP>; /* CLKID_TS_COMP>;*/ - clock-names = "ts_comp"; - #thermal-sensor-cells = <1>; - }; - - d_tsensor: d_tsensor@ff634c00 { - compatible = "amlogic, r1p1-tsensor"; - status = "okay"; - reg = <0xff634c00 0x50>, - <0xff800230 0x4>; - cal_type = <0x1>; - cal_a = <324>; - cal_b = <424>; - cal_c = <3159>; - cal_d = <9411>; - rtemp = <115000>; - interrupts = <0 36 0>; - clocks = <&clkc CLKID_TS_CLK_COMP>; /* CLKID_TS_COMP>;*/ - clock-names = "ts_comp"; - #thermal-sensor-cells = <1>; - }; - - meson_cooldev: meson-cooldev@0 { - status = "okay"; - compatible = "amlogic, meson-cooldev"; - cooling_devices { - cpufreq_cool_cluster0 { - min_state = <1000000>; - dyn_coeff = <115>; - gpu_pp = <2>; - cluster_id = <0>; - node_name = "cpufreq_cool0"; - device_type = "cpufreq"; - }; - cpucore_cool_cluster0 { - min_state = <1>; - dyn_coeff = <0>; - gpu_pp = <2>; - cluster_id = <0>; - node_name = "cpucore_cool0"; - device_type = "cpucore"; - }; - gpufreq_cool { - min_state = <400>; - dyn_coeff = <358>; - gpu_pp = <2>; - cluster_id = <0>; - node_name = "gpufreq_cool0"; - device_type = "gpufreq"; - }; - gpucore_cool { - min_state = <1>; - dyn_coeff = <0>; - gpu_pp = <2>; - cluster_id = <0>; - node_name = "gpucore_cool0"; - device_type = "gpucore"; - }; - }; - cpufreq_cool0:cpufreq_cool0 { - #cooling-cells = <2>; /* min followed by max */ - }; - cpucore_cool0:cpucore_cool0 { - #cooling-cells = <2>; /* min followed by max */ - }; - gpufreq_cool0:gpufreq_cool0 { - #cooling-cells = <2>; /* min followed by max */ - }; - gpucore_cool0:gpucore_cool0 { - #cooling-cells = <2>; /* min followed by max */ - }; - };/*meson cooling devices end*/ - - thermal-zones { - pll_thermal: pll_thermal { - polling-delay = <1000>; - polling-delay-passive = <100>; - sustainable-power = <1410>; - thermal-sensors = <&p_tsensor 0>; - trips { - pswitch_on: trip-point@0 { - temperature = <60000>; - hysteresis = <5000>; - type = "passive"; - }; - pcontrol: trip-point@1 { - temperature = <75000>; - hysteresis = <5000>; - type = "passive"; - }; - phot: trip-point@2 { - temperature = <85000>; - hysteresis = <5000>; - type = "hot"; - }; - pcritical: trip-point@3 { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - cooling-maps { - cpufreq_cooling_map { - trip = <&pcontrol>; - cooling-device = <&cpufreq_cool0 0 4>; - contribution = <1024>; - }; - gpufreq_cooling_map { - trip = <&pcontrol>; - cooling-device = <&gpufreq_cool0 0 4>; - contribution = <1024>; - }; - }; - }; - ddr_thermal: ddr_thermal { - polling-delay = <1000>; - polling-delay-passive = <250>; - sustainable-power = <1460>; - thermal-sensors = <&d_tsensor 1>; - trips { - dswitch_on: trip-point@0 { - temperature = <60000>; - hysteresis = <5000>; - type = "passive"; - }; - dcontrol: trip-point@1 { - temperature = <75000>; - hysteresis = <5000>; - type = "passive"; - }; - dhot: trip-point@2 { - temperature = <85000>; - hysteresis = <5000>; - type = "hot"; - }; - dcritical: trip-point@3 { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - }; /*thermal zone end*/ - - /*DCDC for MP8756GD*/ - cpu_opp_table0: cpu_opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - opp01 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - opp02 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - opp03 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <761000>; - }; - opp04 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <791000>; - }; - opp05 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <801000>; - }; - opp06 { - opp-hz = /bits/ 64 <1404000000>; - opp-microvolt = <831000>; - }; - opp07 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <861000>; - }; - opp08 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <891000>; - }; - opp09 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <921000>; - }; - opp10 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <981000>; - }; - opp11 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <1011000>; - }; - }; - - cpufreq-meson { - compatible = "amlogic, cpufreq-meson"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_ao_d_pins3>; - status = "okay"; - }; - - tuner: tuner { - compatible = "amlogic, tuner"; - status = "okay"; - tuner_cur = <0>; /* default use tuner */ - tuner_num = <1>; /* tuner number, multi tuner support */ - tuner_name_0 = "mxl661_tuner"; - tuner_i2c_adap_0 = <&i2c0>; - tuner_i2c_addr_0 = <0x60>; - tuner_xtal_0 = <1>; /* 0: 16MHz, 1: 24MHz */ - tuner_xtal_mode_0 = <3>; - /* NO_SHARE_XTAL(0) - * SLAVE_XTAL_SHARE(3) - */ - tuner_xtal_cap_0 = <25>; /* when tuner_xtal_mode = 3, set 25 */ - }; - - atv-demod { - compatible = "amlogic, atv-demod"; - status = "okay"; - tuner = <&tuner>; - btsc_sap_mode = <1>; - interrupts = <0 236 1>; - /* pinctrl-names="atvdemod_agc_pins"; */ - /* pinctrl-0=<&atvdemod_agc_pins>; */ - reg = <0xff656000 0x2000 /* demod reg */ - 0xff63c000 0x2000 /* hiu reg */ - 0xff634000 0x2000 /* periphs reg */ - 0xff64a000 0x2000>; /* audio reg */ - reg_23cf = <0x88188832>; - /*default:0x88188832;r840 on haier:0x48188832*/ - }; - - bt-dev{ - compatible = "amlogic, bt-dev"; - status = "okay"; - gpio_reset = <&gpio GPIOC_13 GPIO_ACTIVE_HIGH>; - }; - - wifi{ - compatible = "amlogic, aml_wifi"; - status = "okay"; - interrupt_pin = <&gpio GPIOC_12 GPIO_ACTIVE_HIGH>; - irq_trigger_type = "GPIO_IRQ_LOW"; - dhd_static_buf; //dhd_static_buf support - power_on_pin = <&gpio GPIOC_11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_b_pins1>; - pwm_config = <&wifi_pwm_conf>; - }; - - wifi_pwm_conf:wifi_pwm_conf{ - pwm_channel1_conf { - pwms = <&pwm_ab MESON_PWM_1 30040 0>; - duty-cycle = <15020>; - times = <8>; - }; - pwm_channel2_conf { - pwms = <&pwm_ab MESON_PWM_3 30030 0>; - duty-cycle = <15015>; - times = <12>; - }; - }; - -}; /* end of / */ - -&i2c0 { - status = "okay"; - clock-frequency = <300000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c0_dv_pins>; - pinctrl-1 = <&i2c0_dv_pins_slp_input>; -}; - -&audiobus { - tdma:tdm@0 { - compatible = "amlogic, tl1-snd-tdma"; - #sound-dai-cells = <0>; - - dai-tdm-lane-slot-mask-in = <1 0>; - dai-tdm-lane-slot-mask-out = <1 1 1 1>; - dai-tdm-clk-sel = <0>; - - clocks = <&clkaudio CLKID_AUDIO_MCLK_A - &clkc CLKID_MPLL0 - &clkc CLKID_MPLL0>; - clock-names = "mclk", "clk_srcpll", "samesource_sysclk"; - - pinctrl-names = "tdm_pins"; - pinctrl-0 = <&tdma_mclk &tdmout_a>; - - /* - * 0: tdmout_a; - * 1: tdmout_b; - * 2: tdmout_c; - * 3: spdifout; - * 4: spdifout_b; - */ - samesource_sel = <3>; - - /* In for ACODEC_ADC */ - acodec_adc = <1>; - mclk_pad = <0>; /* 0: mclk_0; 1: mclk_1 */ - - /*enable default mclk(12.288M), before extern codec start*/ - start_clk_enable = <1>; - - /*tdm clk tuning enable*/ - clk_tuning_enable = <1>; - - status = "okay"; - - /* !!!For --TV platform-- ONLY */ - Channel_Mask { - /*i2s has 4 pins, 8channel, mux output*/ - Spdif_samesource_Channel_Mask = "i2s_2/3"; - }; - }; - - tdmb:tdm@1 { - compatible = "amlogic, tl1-snd-tdmb"; - #sound-dai-cells = <0>; - - dai-tdm-lane-slot-mask-in = <1 0 0 0>; - dai-tdm-lane-slot-mask-out = <1 0 0 0>; - dai-tdm-clk-sel = <1>; - - clocks = <&clkaudio CLKID_AUDIO_MCLK_B - &clkc CLKID_MPLL1>; - clock-names = "mclk", "clk_srcpll"; - - mclk_pad = <0>; /* 0: mclk_0; 1: mclk_1 */ - - status = "okay"; - }; - - tdmc:tdm@2 { - compatible = "amlogic, tl1-snd-tdmc"; - #sound-dai-cells = <0>; - - dai-tdm-lane-slot-mask-in = <1 0 0 0>; - dai-tdm-lane-slot-mask-out = <1 0 0 0>; - dai-tdm-clk-sel = <2>; - - clocks = <&clkaudio CLKID_AUDIO_MCLK_C - &clkc CLKID_MPLL2>; - clock-names = "mclk", "clk_srcpll"; - - pinctrl-names = "tdm_pins"; - pinctrl-0 = <&tdmout_c &tdmin_c>; - - mclk_pad = <0>; /* 0: mclk_0; 1: mclk_1 */ - - status = "okay"; - }; - - tdmlb:tdm@3 { - compatible = "amlogic, tl1-snd-tdmlb"; - #sound-dai-cells = <0>; - - dai-tdm-lane-lb-slot-mask-in = <1 0 0 0>; - dai-tdm-clk-sel = <1>; - - clocks = <&clkaudio CLKID_AUDIO_MCLK_B - &clkc CLKID_MPLL1>; - clock-names = "mclk", "clk_srcpll"; - - /* - * select tdmin_lb src; - * AXG - * 0: TDMOUTA - * 1: TDMOUTB - * 2: TDMOUTC - * 3: PAD_TDMINA - * 4: PAD_TDMINB - * 5: PAD_TDMINC - * - * G12A/G12B - * 0: TDMOUTA - * 1: TDMOUTB - * 2: TDMOUTC - * 3: PAD_TDMINA_DIN* - * 4: PAD_TDMINB_DIN* - * 5: PAD_TDMINC_DIN* - * 6: PAD_TDMINA_D*, oe pin - * 7: PAD_TDMINB_D*, oe pin - * - * TL1 - * 0: TDMOUTA - * 1: TDMOUTB - * 2: TDMOUTC - * 3: PAD_TDMINA_DIN* - * 4: PAD_TDMINB_DIN* - * 5: PAD_TDMINC_DIN* - * 6: PAD_TDMINA_D* - * 7: PAD_TDMINB_D* - * 8: PAD_TDMINC_D* - * 9: HDMIRX_I2S - * 10: ACODEC_ADC - */ - lb-src-sel = <1>; - - status = "disabled"; - }; - - spdifa:spdif@0 { - compatible = "amlogic, tl1-snd-spdif-a"; - #sound-dai-cells = <0>; - - clocks = <&clkc CLKID_MPLL1 - &clkc CLKID_FCLK_DIV4 - &clkaudio CLKID_AUDIO_GATE_SPDIFIN - &clkaudio CLKID_AUDIO_GATE_SPDIFOUT_A - &clkaudio CLKID_AUDIO_SPDIFIN - &clkaudio CLKID_AUDIO_SPDIFOUT_A>; - clock-names = "sysclk", "fixed_clk", "gate_spdifin", - "gate_spdifout", "clk_spdifin", "clk_spdifout"; - - interrupts = - ; - interrupt-names = "irq_spdifin"; - - pinctrl-names = "spdif_pins", - "spdif_pins_mute"; - pinctrl-0 = <&spdifout_a>; - pinctrl-1 = <&spdifout_a_mute>; - - /* - * whether do asrc for pcm and resample a or b - * if raw data, asrc is disabled automatically - * 0: "Disable", - * 1: "Enable:32K", - * 2: "Enable:44K", - * 3: "Enable:48K", - * 4: "Enable:88K", - * 5: "Enable:96K", - * 6: "Enable:176K", - * 7: "Enable:192K", - */ - asrc_id = <0>; - auto_asrc = <0>; - - /*spdif clk tuning enable*/ - clk_tuning_enable = <1>; - - status = "okay"; - }; - - spdifb:spdif@1 { - compatible = "amlogic, tl1-snd-spdif-b"; - #sound-dai-cells = <0>; - - clocks = <&clkc CLKID_MPLL0 /*CLKID_HIFI_PLL*/ - &clkaudio CLKID_AUDIO_GATE_SPDIFOUT_B - &clkaudio CLKID_AUDIO_SPDIFOUT_B>; - clock-names = "sysclk", - "gate_spdifout", "clk_spdifout"; - - status = "okay"; - }; - - pdm:pdm { - compatible = "amlogic, tl1-snd-pdm"; - #sound-dai-cells = <0>; - - clocks = <&clkaudio CLKID_AUDIO_GATE_PDM - &clkc CLKID_HIFI_PLL - &clkc CLKID_HIFI_PLL - &clkaudio CLKID_AUDIO_PDMIN0 - &clkaudio CLKID_AUDIO_PDMIN1>; - clock-names = "gate", - "sysclk_srcpll", - "dclk_srcpll", - "pdm_dclk", - "pdm_sysclk"; - - pinctrl-names = "pdm_pins"; - pinctrl-0 = <&pdmin>; - - /* mode 0~4, defalut:1 */ - filter_mode = <1>; - - status = "okay"; - }; - - extn:extn { - compatible = "amlogic, snd-extn"; - #sound-dai-cells = <0>; - - interrupts = - ; - interrupt-names = "irq_frhdmirx"; - - status = "okay"; - }; - - aed:effect { - compatible = "amlogic, snd-effect-v2"; - #sound-dai-cells = <0>; - - clocks = <&clkaudio CLKID_AUDIO_GATE_EQDRC - &clkc CLKID_FCLK_DIV5 - &clkaudio CLKID_AUDIO_EQDRC>; - clock-names = "gate", "srcpll", "eqdrc"; - - /* - * 0:tdmout_a - * 1:tdmout_b - * 2:tdmout_c - * 3:spdifout - * 4:spdifout_b - */ - eqdrc_module = <0>; - /* max 0xf, each bit for one lane, usually one lane */ - lane_mask = <0x1>; - /* max 0xff, each bit for one channel */ - channel_mask = <0xff>; - - status = "okay"; - }; - - asrca: resample@0 { - compatible = "amlogic, sm1-resample-a"; - clocks = <&clkc CLKID_MPLL0 - &clkaudio CLKID_AUDIO_MCLK_A - &clkaudio CLKID_AUDIO_RESAMPLE_A>; - clock-names = "resample_pll", "resample_src", "resample_clk"; - - /*same with toddr_src - * TDMIN_A, 0 - * TDMIN_B, 1 - * TDMIN_C, 2 - * SPDIFIN, 3 - * PDMIN, 4 - * FRATV, 5 - * TDMIN_LB, 6 - * LOOPBACK_A, 7 - * FRHDMIRX, 8 - * LOOPBACK_B, 9 - * SPDIFIN_LB, 10 - * EARC_RX, 11 - */ - resample_module = <8>; - - status = "okay"; - }; - - asrcb: resample@1 { - compatible = "amlogic, sm1-resample-b"; - clocks = <&clkc CLKID_MPLL3 - &clkaudio CLKID_AUDIO_MCLK_F - &clkaudio CLKID_AUDIO_RESAMPLE_B>; - clock-names = "resample_pll", "resample_src", "resample_clk"; - - /*this resample is only used for loopback_A.*/ - /*only support 16000 or 48000Hz for capture*/ - capture_sample_rate = <16000>; - - status = "okay"; - }; - - vad:vad { - compatible = "amlogic, snd-vad"; - #sound-dai-cells = <0>; - - clocks = <&clkaudio CLKID_AUDIO_GATE_TOVAD - &clkc CLKID_HIFI_PLL - &clkaudio CLKID_AUDIO_VAD>; - clock-names = "gate", "pll", "clk"; - - interrupts = ; - interrupt-names = "irq_wakeup", "irq_frame_sync"; - - /* - * Data src sel: - * 0: tdmin_a; - * 1: tdmin_b; - * 2: tdmin_c; - * 3: spdifin; - * 4: pdmin; - * 5: loopback_b; - * 6: tdmin_lb; - * 7: loopback_a; - */ - src = <4>; - - /* - * deal with hot word in user space or kernel space - * 0: in user space - * 1: in kernel space - */ - level = <1>; - - status = "okay"; - }; - - loopbacka:loopback@0 { - compatible = "amlogic, tl1-loopbacka"; - #sound-dai-cells = <0>; - - clocks = <&clkaudio CLKID_AUDIO_GATE_PDM - &clkc CLKID_HIFI_PLL - &clkc CLKID_HIFI_PLL - &clkaudio CLKID_AUDIO_PDMIN0 - &clkaudio CLKID_AUDIO_PDMIN1 - &clkc CLKID_MPLL0 - &clkaudio CLKID_AUDIO_MCLK_A>; - clock-names = "pdm_gate", - "pdm_sysclk_srcpll", - "pdm_dclk_srcpll", - "pdm_dclk", - "pdm_sysclk", - "tdminlb_mpll", - "tdminlb_mclk"; - - /* datain src - * 0: tdmin_a; - * 1: tdmin_b; - * 2: tdmin_c; - * 3: spdifin; - * 4: pdmin; - */ - datain_src = <4>; - datain_chnum = <4>; - datain_chmask = <0xf>; - /* config which data pin for loopback */ - datain-lane-mask-in = <1 0 1 0>; - - /* calc mclk for datalb */ - mclk-fs = <256>; - - /* tdmin_lb src - * 0: tdmoutA - * 1: tdmoutB - * 2: tdmoutC - * 3: PAD_TDMINA_DIN*, refer to core pinmux - * 4: PAD_TDMINB_DIN*, refer to core pinmux - * 5: PAD_TDMINC_DIN*, refer to core pinmux - * 6: PAD_TDMINA_D*, oe, refer to core pinmux - * 7: PAD_TDMINB_D*, oe, refer to core pinmux - */ - /* if tdmin_lb >= 3, use external loopback */ - datalb_src = <0>; - datalb_chnum = <2>; - datalb_chmask = <0x3>; - /* config which data pin as loopback */ - datalb-lane-mask-in = <1 0 0 0>; - - status = "okay"; - }; - - loopbackb:loopback@1 { - compatible = "amlogic, tl1-loopbackb"; - #sound-dai-cells = <0>; - - clocks = <&clkaudio CLKID_AUDIO_GATE_PDM - &clkc CLKID_HIFI_PLL - &clkc CLKID_HIFI_PLL - &clkaudio CLKID_AUDIO_PDMIN0 - &clkaudio CLKID_AUDIO_PDMIN1 - &clkc CLKID_MPLL0 - &clkaudio CLKID_AUDIO_MCLK_A>; - clock-names = "pdm_gate", - "pdm_sysclk_srcpll", - "pdm_dclk_srcpll", - "pdm_dclk", - "pdm_sysclk", - "tdminlb_mpll", - "tdminlb_mclk"; - - /* calc mclk for datain_lb */ - mclk-fs = <256>; - - /* datain src - * 0: tdmin_a; - * 1: tdmin_b; - * 2: tdmin_c; - * 3: spdifin; - * 4: pdmin; - */ - datain_src = <4>; - datain_chnum = <4>; - datain_chmask = <0xf>; - /* config which data pin for loopback */ - datain-lane-mask-in = <1 0 1 0>; - - /* tdmin_lb src - * 0: tdmoutA - * 1: tdmoutB - * 2: tdmoutC - * 3: PAD_TDMINA_DIN*, refer to core pinmux - * 4: PAD_TDMINB_DIN*, refer to core pinmux - * 5: PAD_TDMINC_DIN*, refer to core pinmux - * 6: PAD_TDMINA_D*, oe, refer to core pinmux - * 7: PAD_TDMINB_D*, oe, refer to core pinmux - */ - /* if tdmin_lb >= 3, use external loopback */ - datalb_src = <1>; - datalb_chnum = <2>; - datalb_chmask = <0x3>; - /* config which data pin as loopback */ - datalb-lane-mask-in = <1 0 0 0>; - - status = "disabled"; - }; -}; /* end of audiobus */ - -&pinctrl_periphs { - /* audio pin mux */ - - tdma_mclk: tdma_mclk { - mux { /* GPIOZ_0 */ - groups = "mclk0_z"; - function = "mclk0"; - }; - }; - - tdmout_a: tdmout_a { - mux { /* GPIOZ_1, GPIOZ_2, GPIOZ_3 */ - groups = "tdma_sclk_z", - "tdma_fs_z", - "tdma_dout0_z"; - function = "tdma_out"; - bias-disable; - }; - }; - - tdmin_a: tdmin_a { - mux { /* GPIOZ_9 */ - groups = "tdma_din2_z"; - function = "tdma_in"; - }; - }; - - tdmout_c: tdmout_c { - mux { /* GPIODV_7, GPIODV_8, GPIODV_9 */ - groups = "tdmc_sclk", - "tdmc_fs", - "tdmc_dout0"; - function = "tdmc_out"; - }; - }; - - tdmin_c: tdmin_c { - mux { /* GPIODV_10 */ - groups = "tdmc_din1"; - function = "tdmc_in"; - }; - }; - - spdifin_a: spdifin_a { - mux { /* GPIODV_5 */ - groups = "spdif_in"; - function = "spdif_in"; - }; - }; - - spdifout_a: spdifout_a { - mux { /* GPIODV_4 */ - groups = "spdif_out_dv4"; - function = "spdif_out"; - }; - }; - - spdifout_a_mute: spdifout_a_mute { - mux { /* GPIODV_4 */ - groups = "GPIODV_4"; - function = "gpio_periphs"; - }; - }; - - pdmin: pdmin { - mux { /* GPIOZ_7, GPIOZ_8, pdm_din2_z4 */ - groups = "pdm_dclk_z", - "pdm_din0_z", - "pdm_din2_z4"; - function = "pdm"; - }; - }; - - -}; /* end of pinctrl_periphs */ - -&audio_data{ - status = "okay"; -}; - -&i2c2 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_z_pins>; - pinctrl-1 = <&i2c2_z_pins_slp_input>; - clock-frequency = <400000>; - - tas5805: tas5805@36 { - compatible = "ti,tas5805"; - #sound-dai-cells = <0>; - codec_name = "tas5805"; - reg = <0x2d>; - status = "disable"; - }; - - ad82584f: ad82584f@62 { - compatible = "ESMT, ad82584f"; - #sound-dai-cells = <0>; - reg = <0x31>; - status = "okay"; - reset_pin = <&gpio_ao GPIOAO_6 0>; - }; - -}; - -&sd_emmc_c { - status = "okay"; - emmc { - caps = "MMC_CAP_8_BIT_DATA", - "MMC_CAP_MMC_HIGHSPEED", - "MMC_CAP_SD_HIGHSPEED", - "MMC_CAP_NONREMOVABLE", - /* "MMC_CAP_1_8V_DDR", */ - "MMC_CAP_HW_RESET", - "MMC_CAP_ERASE", - "MMC_CAP_CMD23", - "MMC_CAP_DRIVER_TYPE_D"; - caps2 = "MMC_CAP2_HS200", "MMC_CAP2_HS400"; - f_min = <400000>; - f_max = <198000000>; - }; -}; - -&sd_emmc_c { - status = "okay"; - emmc { - caps = "MMC_CAP_8_BIT_DATA", - "MMC_CAP_MMC_HIGHSPEED", - "MMC_CAP_SD_HIGHSPEED", - "MMC_CAP_NONREMOVABLE", - /* "MMC_CAP_1_8V_DDR", */ - "MMC_CAP_HW_RESET", - "MMC_CAP_ERASE", - "MMC_CAP_CMD23"; - caps2 = "MMC_CAP2_HS200"; - /* "MMC_CAP2_HS400";*/ - f_min = <400000>; - f_max = <200000000>; - }; -}; - -&sd_emmc_b { - status = "okay"; - sd { - caps = "MMC_CAP_4_BIT_DATA", - "MMC_CAP_MMC_HIGHSPEED", - "MMC_CAP_SD_HIGHSPEED", - "MMC_CAP_NONREMOVABLE"; /**ptm debug */ - f_min = <400000>; - f_max = <200000000>; - }; -}; - -&spifc { - status = "disabled"; - spi-nor@0 { - cs_gpios = <&gpio BOOT_13 GPIO_ACTIVE_HIGH>; - }; -}; - -&slc_nand { - status = "disabled"; - plat-names = "bootloader", "nandnormal"; - plat-num = <2>; - plat-part-0 = <&bootloader>; - plat-part-1 = <&nandnormal>; - bootloader: bootloader{ - enable_pad = "ce0"; - busy_pad = "rb0"; - timming_mode = "mode5"; - bch_mode = "bch8_1k"; - t_rea = <20>; - t_rhoh = <15>; - chip_num = <1>; - part_num = <0>; - rb_detect = <1>; - }; - nandnormal: nandnormal{ - enable_pad = "ce0"; - busy_pad = "rb0"; - timming_mode = "mode5"; - bch_mode = "bch8_1k"; - plane_mode = "twoplane"; - t_rea = <20>; - t_rhoh = <15>; - chip_num = <2>; - part_num = <3>; - partition = <&nand_partitions>; - rb_detect = <1>; - }; - nand_partitions:nand_partition{ - /* - * if bl_mode is 1, tpl size was generate by - * fip_copies * fip_size which - * will not skip bad when calculating - * the partition size; - * - * if bl_mode is 0, - * tpl partition must be comment out. - */ - tpl{ - offset=<0x0 0x0>; - size=<0x0 0x0>; - }; - logo{ - offset=<0x0 0x0>; - size=<0x0 0x200000>; - }; - recovery{ - offset=<0x0 0x0>; - size=<0x0 0x1000000>; - }; - boot{ - offset=<0x0 0x0>; - size=<0x0 0x1000000>; - }; - system{ - offset=<0x0 0x0>; - size=<0x0 0x4000000>; - }; - data{ - offset=<0xffffffff 0xffffffff>; - size=<0x0 0x0>; - }; - }; -}; - -ðmac { - status = "okay"; - pinctrl-names = "internal_eth_pins"; - pinctrl-0 = <&internal_eth_pins>; - mc_val = <0x4be04>; - - internal_phy=<1>; -}; - -&uart_A { - status = "okay"; -}; - -&dwc3 { - status = "okay"; -}; - -&usb2_phy_v2 { - status = "okay"; - portnum = <3>; -}; - -&usb3_phy_v2 { - status = "okay"; - portnum = <2>; - portconfig-30 = <1>; - portconfig-31 = <1>; -}; - -&usb_otg { - status = "okay"; - otg = <0>; -}; - -&dwc2_a { - status = "okay"; - /** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/ - controller-type = <1>; -}; - -&pcie_A { - reset-gpio = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - status = "disable"; -}; - -&pcie_B { - /* pcie b reset gpio is the oe pad, must be changed */ - reset-gpio = <&gpio GPIOH_22 GPIO_ACTIVE_HIGH>; - status = "disable"; -}; - -&spicc0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spicc0_pins_h>; - cs-gpios = <&gpio GPIOH_20 0>; -}; - -&meson_fb { - status = "okay"; - display_size_default = <1920 1080 1920 2160 32>; - mem_size = <0x00800000 0x1980000 0x100000 0x800000>; - logo_addr = "0x7f800000"; - mem_alloc = <0>; - pxp_mode = <0>; /** 0:normal mode 1:pxp mode */ -}; - -&pwm_AO_cd { - status = "okay"; -}; - -&saradc { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <300000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_h_pins>; - pinctrl-1 = <&i2c1_h_pins_slp_input>; - - lcd_extern_i2c0: lcd_extern_i2c@0 { - compatible = "lcd_ext, i2c"; - dev_name = "i2c_T5800Q"; - reg = <0x1c>; - status = "okay"; - }; - - lcd_extern_i2c1: lcd_extern_i2c@1 { - compatible = "lcd_ext, i2c"; - dev_name = "i2c_ANX6862"; - reg = <0x20>; - status = "okay"; - }; - - lcd_extern_i2c2: lcd_extern_i2c@2 { - compatible = "lcd_ext, i2c"; - dev_name = "i2c_ANX7911"; - reg = <0x74>; - status = "okay"; - }; -}; - -&pwm_ab { - status = "okay"; -}; - -&efuse { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g.dts b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g.dts index 080d350806dd..07550467c20e 100644 --- a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g.dts +++ b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g.dts @@ -1522,7 +1522,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * }; diff --git a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts index 15f16ac52af6..bbb20480debf 100644 --- a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts +++ b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts @@ -1358,7 +1358,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * }; diff --git a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts index fdaa500d2fe4..31d43afc8866 100644 --- a/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts +++ b/arch/arm/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts @@ -1353,7 +1353,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * }; diff --git a/arch/arm64/boot/dts/amlogic/mesong12a.dtsi b/arch/arm64/boot/dts/amlogic/mesong12a.dtsi index d8e45262aeae..b8edbdba2772 100644 --- a/arch/arm64/boot/dts/amlogic/mesong12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/mesong12a.dtsi @@ -1435,7 +1435,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), @@ -1504,7 +1504,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm64/boot/dts/amlogic/mesong12b.dtsi b/arch/arm64/boot/dts/amlogic/mesong12b.dtsi index d61a42d2e359..5814795d4767 100644 --- a/arch/arm64/boot/dts/amlogic/mesong12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/mesong12b.dtsi @@ -1521,7 +1521,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm64/boot/dts/amlogic/mesong12b_a.dtsi b/arch/arm64/boot/dts/amlogic/mesong12b_a.dtsi index 0b9a4df7baf2..8bc143a88705 100644 --- a/arch/arm64/boot/dts/amlogic/mesong12b_a.dtsi +++ b/arch/arm64/boot/dts/amlogic/mesong12b_a.dtsi @@ -1497,7 +1497,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm64/boot/dts/amlogic/mesonsm1.dtsi b/arch/arm64/boot/dts/amlogic/mesonsm1.dtsi index e0b7e06bb56c..1d12d86df084 100644 --- a/arch/arm64/boot/dts/amlogic/mesonsm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/mesonsm1.dtsi @@ -1545,7 +1545,7 @@ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */ max_req_size = <0x20000>; /**128KB*/ gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; gpio_cd = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; card_type = <5>; /* 3:sdio device(ie:sdio-wifi), diff --git a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g.dts b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g.dts index ae7cec9e01e0..f1c0012d0b73 100644 --- a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g.dts +++ b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g.dts @@ -1330,7 +1330,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * }; diff --git a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts index 67f3c70f7e0d..88a4752c6b9b 100644 --- a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts +++ b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_1g_drm.dts @@ -1353,7 +1353,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * }; diff --git a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g.dts b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g.dts index 07d96d0cbb6b..2768f37be34a 100644 --- a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g.dts +++ b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g.dts @@ -1324,7 +1324,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * }; diff --git a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts index 4990aa050e67..0b708de6035a 100644 --- a/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts +++ b/arch/arm64/boot/dts/amlogic/tl1_t962x2_x301_2g_drm.dts @@ -1347,7 +1347,7 @@ * max_req_size = <0x20000>; * no_sduart = <1>; * gpio_dat3 = <&gpio GPIOC_3 GPIO_ACTIVE_HIGH>; - * jtag_pin = <&gpio GPIOC_0 GPIO_ACTIVE_HIGH>; + * jtag_pin = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; * gpio_cd = <&gpio GPIOC_10 GPIO_ACTIVE_HIGH>; * card_type = <5>; * };