Merge 5.15.131 into android14-5.15-lts

Changes in 5.15.131
	erofs: ensure that the post-EOF tails are all zeroed
	ksmbd: fix wrong DataOffset validation of create context
	ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
	ARM: pxa: remove use of symbol_get()
	mmc: au1xmmc: force non-modular build and remove symbol_get usage
	net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
	rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
	modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
	USB: serial: option: add Quectel EM05G variant (0x030e)
	USB: serial: option: add FOXCONN T99W368/T99W373 product
	ALSA: usb-audio: Fix init call orders for UAC1
	usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
	usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
	HID: wacom: remove the battery when the EKR is off
	staging: rtl8712: fix race condition
	Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
	wifi: mt76: mt7921: do not support one stream on secondary antenna only
	serial: qcom-geni: fix opp vote on shutdown
	serial: sc16is7xx: fix broken port 0 uart init
	serial: sc16is7xx: fix bug when first setting GPIO direction
	firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
	fsi: master-ast-cf: Add MODULE_FIRMWARE macro
	tcpm: Avoid soft reset when partner does not support get_status
	nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
	nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
	pinctrl: amd: Don't show `Invalid config param` errors
	usb: typec: tcpci: move tcpci.h to include/linux/usb/
	usb: typec: tcpci: clear the fault status bit
	Linux 5.15.131

Change-Id: Ibc84babdb4271151877ddf78b9eb2b25c1a43d26
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 130
+SUBLEVEL = 131
 EXTRAVERSION =
 NAME = Trick or Treat
 

arch/arm/mach-pxa/sharpsl_pm.c

@@ -220,8 +220,6 @@ void sharpsl_battery_kick(void)
 {
 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 }
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {

arch/arm/mach-pxa/spitz.c

@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -514,17 +513,6 @@ static struct pxa2xx_spi_chip spitz_ads7846_chip = {
 	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
@@ -552,7 +540,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.kick_battery		= spitz_bl_kick_battery,
+	.kick_battery		= sharpsl_battery_kick,
 };
 
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {

arch/mips/alchemy/devboards/db1000.c

@@ -14,7 +14,6 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
@@ -167,12 +166,7 @@ static struct platform_device db1x00_audio_dev = {
 
 static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(500));
-	symbol_put(mmc_detect_change);
-
+	mmc_detect_change(ptr, msecs_to_jiffies(500));
 	return IRQ_HANDLED;
 }
 

arch/mips/alchemy/devboards/db1200.c

@@ -10,7 +10,6 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
@@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
 
 static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1200_SD0_INSERT_INT)
@@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
 
 static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == PB1200_SD1_INSERT_INT)

arch/mips/alchemy/devboards/db1300.c

@@ -17,7 +17,6 @@
 #include <linux/interrupt.h>
 #include <linux/ata_platform.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/platnand.h>
 #include <linux/platform_device.h>
@@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 
 static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
-	 * initialized the controller, so symbol_get() should always succeed.
-	 */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(200));
-	symbol_put(mmc_detect_change);
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1300_SD1_INSERT_INT)

drivers/bluetooth/btsdio.c

@@ -355,6 +355,7 @@ static void btsdio_remove(struct sdio_func *func)
 	if (!data)
 		return;
 
+	cancel_work_sync(&data->work);
 	hdev = data->hdev;
 
 	sdio_set_drvdata(func, NULL);

drivers/firmware/stratix10-svc.c

@@ -623,7 +623,7 @@ svc_create_memory_pool(struct platform_device *pdev,
 	paddr = begin;
 	size = end - begin;
 	va = devm_memremap(dev, paddr, size, MEMREMAP_WC);
-	if (!va) {
+	if (IS_ERR(va)) {
 		dev_err(dev, "fail to remap shared memory\n");
 		return ERR_PTR(-EINVAL);
 	}

drivers/fsi/fsi-master-ast-cf.c

@@ -1439,3 +1439,4 @@ static struct platform_driver fsi_master_acf = {
 
 module_platform_driver(fsi_master_acf);
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FW_FILE_NAME);

drivers/hid/wacom.h

@@ -153,6 +153,7 @@ struct wacom_remote {
 		struct input_dev *input;
 		bool registered;
 		struct wacom_battery battery;
+		ktime_t active_time;
 	} remotes[WACOM_MAX_REMOTES];
 };
 

drivers/hid/wacom_sys.c

@@ -2535,6 +2535,18 @@ fail:
 	return;
 }
 
+static void wacom_remote_destroy_battery(struct wacom *wacom, int index)
+{
+	struct wacom_remote *remote = wacom->remote;
+
+	if (remote->remotes[index].battery.battery) {
+		devres_release_group(&wacom->hdev->dev,
+				     &remote->remotes[index].battery.bat_desc);
+		remote->remotes[index].battery.battery = NULL;
+		remote->remotes[index].active_time = 0;
+	}
+}
+
 static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
 {
 	struct wacom_remote *remote = wacom->remote;
@@ -2549,9 +2561,7 @@ static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
 			remote->remotes[i].registered = false;
 			spin_unlock_irqrestore(&remote->remote_lock, flags);
 
-			if (remote->remotes[i].battery.battery)
-				devres_release_group(&wacom->hdev->dev,
-						     &remote->remotes[i].battery.bat_desc);
+			wacom_remote_destroy_battery(wacom, i);
 
 			if (remote->remotes[i].group.name)
 				devres_release_group(&wacom->hdev->dev,
@@ -2559,7 +2569,6 @@ static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
 
 			remote->remotes[i].serial = 0;
 			remote->remotes[i].group.name = NULL;
-			remote->remotes[i].battery.battery = NULL;
 			wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
 		}
 	}
@@ -2644,6 +2653,9 @@ static int wacom_remote_attach_battery(struct wacom *wacom, int index)
 	if (remote->remotes[index].battery.battery)
 		return 0;
 
+	if (!remote->remotes[index].active_time)
+		return 0;
+
 	if (wacom->led.groups[index].select == WACOM_STATUS_UNKNOWN)
 		return 0;
 
@@ -2659,6 +2671,7 @@ static void wacom_remote_work(struct work_struct *work)
 {
 	struct wacom *wacom = container_of(work, struct wacom, remote_work);
 	struct wacom_remote *remote = wacom->remote;
+	ktime_t kt = ktime_get();
 	struct wacom_remote_data data;
 	unsigned long flags;
 	unsigned int count;
@@ -2685,6 +2698,10 @@ static void wacom_remote_work(struct work_struct *work)
 		serial = data.remote[i].serial;
 		if (data.remote[i].connected) {
 
+			if (kt - remote->remotes[i].active_time > WACOM_REMOTE_BATTERY_TIMEOUT
+			    && remote->remotes[i].active_time != 0)
+				wacom_remote_destroy_battery(wacom, i);
+
 			if (remote->remotes[i].serial == serial) {
 				wacom_remote_attach_battery(wacom, i);
 				continue;

drivers/hid/wacom_wac.c

@@ -1134,6 +1134,7 @@ static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
 	if (index < 0 || !remote->remotes[index].registered)
 		goto out;
 
+	remote->remotes[i].active_time = ktime_get();
 	input = remote->remotes[index].input;
 
 	input_report_key(input, BTN_0, (data[9] & 0x01));

drivers/hid/wacom_wac.h

@@ -15,6 +15,7 @@
 #define WACOM_NAME_MAX		64
 #define WACOM_MAX_REMOTES	5
 #define WACOM_STATUS_UNKNOWN	255
+#define WACOM_REMOTE_BATTERY_TIMEOUT	21000000000ll
 
 /* packet length for individual models */
 #define WACOM_PKGLEN_BBFUN	 9

drivers/mmc/host/Kconfig

@@ -523,11 +523,12 @@ config MMC_ALCOR
 	  of Alcor Micro PCI-E card reader
 
 config MMC_AU1X
-	tristate "Alchemy AU1XX0 MMC Card Interface support"
+	bool "Alchemy AU1XX0 MMC Card Interface support"
 	depends on MIPS_ALCHEMY
+	depends on MMC=y
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
-	  If you have a Alchemy platform with a MMC slot, say Y or M here.
+	  If you have a Alchemy platform with a MMC slot, say Y here.
 
 	  If unsure, say N.
 

drivers/net/ethernet/freescale/enetc/enetc_ptp.c

@@ -8,7 +8,7 @@
 #include "enetc.h"
 
 int enetc_phc_index = -1;
-EXPORT_SYMBOL(enetc_phc_index);
+EXPORT_SYMBOL_GPL(enetc_phc_index);
 
 static struct ptp_clock_info enetc_ptp_caps = {
 	.owner		= THIS_MODULE,

drivers/net/wireless/mediatek/mt76/mt7921/main.c

@@ -994,7 +994,7 @@ mt7921_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
 		return -EINVAL;
 
 	if ((BIT(hweight8(tx_ant)) - 1) != tx_ant)
-		tx_ant = BIT(ffs(tx_ant) - 1) - 1;
+		return -EINVAL;
 
 	mt7921_mutex_acquire(dev);
 

drivers/pinctrl/pinctrl-amd.c

@@ -752,7 +752,7 @@ static int amd_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 
 	default:
-		dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
+		dev_dbg(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
 			param);
 		return -ENOTSUPP;
 	}
@@ -805,7 +805,7 @@ static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			break;
 
 		default:
-			dev_err(&gpio_dev->pdev->dev,
+			dev_dbg(&gpio_dev->pdev->dev,
 				"Invalid config param %04x\n", param);
 			ret = -ENOTSUPP;
 		}

drivers/rtc/rtc-ds1685.c

@@ -1438,7 +1438,7 @@ ds1685_rtc_poweroff(struct platform_device *pdev)
 		unreachable();
 	}
 }
-EXPORT_SYMBOL(ds1685_rtc_poweroff);
+EXPORT_SYMBOL_GPL(ds1685_rtc_poweroff);
 /* ----------------------------------------------------------------------- */
 
 

drivers/staging/rtl8712/os_intfs.c

@@ -323,6 +323,7 @@ int r8712_init_drv_sw(struct _adapter *padapter)
 	mp871xinit(padapter);
 	init_default_value(padapter);
 	r8712_InitSwLeds(padapter);
+	mutex_init(&padapter->mutex_start);
 	return ret;
 }
 

drivers/staging/rtl8712/usb_intf.c

@@ -567,7 +567,6 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
 	if (rtl871x_load_fw(padapter))
 		goto deinit_drv_sw;
 	spin_lock_init(&padapter->lock_rx_ff0_filter);
-	mutex_init(&padapter->mutex_start);
 	return 0;
 
 deinit_drv_sw:

drivers/tty/serial/qcom_geni_serial.c

@@ -136,6 +136,7 @@ struct qcom_geni_serial_port {
 	u32 tx_fifo_width;
 	u32 rx_fifo_depth;
 	bool setup;
+	unsigned long clk_rate;
 	int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
 	unsigned int baud;
 	void *rx_fifo;
@@ -1034,6 +1035,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 		goto out_restart_rx;
 
 	uport->uartclk = clk_rate;
+	port->clk_rate = clk_rate;
 	dev_pm_opp_set_rate(uport->dev, clk_rate);
 	ser_clk_cfg = SER_CLK_EN;
 	ser_clk_cfg |= clk_div << CLK_DIV_SHFT;
@@ -1303,10 +1305,13 @@ static void qcom_geni_serial_pm(struct uart_port *uport,
 
 	if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) {
 		geni_icc_enable(&port->se);
+		if (port->clk_rate)
+			dev_pm_opp_set_rate(uport->dev, port->clk_rate);
 		geni_se_resources_on(&port->se);
 	} else if (new_state == UART_PM_STATE_OFF &&
 			old_state == UART_PM_STATE_ON) {
 		geni_se_resources_off(&port->se);
+		dev_pm_opp_set_rate(uport->dev, 0);
 		geni_icc_disable(&port->se);
 	}
 }

drivers/tty/serial/sc16is7xx.c

@@ -1170,9 +1170,18 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
 		state |= BIT(offset);
 	else
 		state &= ~BIT(offset);
-	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
+
+	/*
+	 * If we write IOSTATE first, and then IODIR, the output value is not
+	 * transferred to the corresponding I/O pin.
+	 * The datasheet states that each register bit will be transferred to
+	 * the corresponding I/O pin programmed as output when writing to
+	 * IOSTATE. Therefore, configure direction first with IODIR, and then
+	 * set value after with IOSTATE.
+	 */
 	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
 			      BIT(offset));
+	sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
 
 	return 0;
 }
@@ -1258,6 +1267,12 @@ static int sc16is7xx_probe(struct device *dev,
 		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iobase	= i;
+		/*
+		 * Use all ones as membase to make sure uart_configure_port() in
+		 * serial_core.c does not abort for SPI/I2C devices where the
+		 * membase address is not applicable.
+		 */
+		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
 		s->p[i].port.rs485_config = sc16is7xx_config_rs485;

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -175,10 +175,12 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 	if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
 		data->ulpi = 1;
 
-	of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
-			&data->emp_curr_control);
-	of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
-			&data->dc_vol_level_adjust);
+	if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+			&data->emp_curr_control))
+		data->emp_curr_control = -1;
+	if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+			&data->dc_vol_level_adjust))
+		data->dc_vol_level_adjust = -1;
 
 	return data;
 }

drivers/usb/chipidea/usbmisc_imx.c

@@ -657,13 +657,15 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
 			usbmisc->base + MX7D_USBNC_USB_CTRL2);
 		/* PHY tuning for signal quality */
 		reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
-		if (data->emp_curr_control && data->emp_curr_control <=
+		if (data->emp_curr_control >= 0 &&
+			data->emp_curr_control <=
 			(TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
 			reg &= ~TXPREEMPAMPTUNE0_MASK;
 			reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
 		}
 
-		if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+		if (data->dc_vol_level_adjust >= 0 &&
+			data->dc_vol_level_adjust <=
 			(TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
 			reg &= ~TXVREFTUNE0_MASK;
 			reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);

drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -938,6 +938,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
 			return ret;
 	}
 
+	if (priv->drvdata->usb_post_init) {
+		ret = priv->drvdata->usb_post_init(priv);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 

drivers/usb/serial/option.c

@@ -259,6 +259,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EM05G			0x030a
 #define QUECTEL_PRODUCT_EM060K			0x030b
 #define QUECTEL_PRODUCT_EM05G_CS		0x030c
+#define QUECTEL_PRODUCT_EM05GV2			0x030e
 #define QUECTEL_PRODUCT_EM05CN_SG		0x0310
 #define QUECTEL_PRODUCT_EM05G_SG		0x0311
 #define QUECTEL_PRODUCT_EM05CN			0x0312
@@ -1190,6 +1191,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff),
+	  .driver_info = RSVD(4) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff),
@@ -2232,6 +2235,10 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
 	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),			/* Foxconn T99W368 MBIM */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */

drivers/usb/typec/tcpm/tcpci.c

@@ -13,12 +13,11 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/usb/pd.h>
+#include <linux/usb/tcpci.h>
 #include <linux/usb/tcpm.h>
 #include <linux/usb/typec.h>
 #include <trace/hooks/typec.h>
 
-#include "tcpci.h"
-
 #define	PD_RETRY_COUNT_DEFAULT			3
 #define	PD_RETRY_COUNT_3_0_OR_HIGHER		2
 #define	AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV	3500
@@ -633,6 +632,10 @@ static int tcpci_init(struct tcpc_dev *tcpc)
 	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;
 
+	ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+	if (ret < 0)
+		return ret;
+
 	/* Handle vendor init */
 	if (tcpci->data->init) {
 		ret = tcpci->data->init(tcpci, tcpci->data);

drivers/usb/typec/tcpm/tcpci_maxim.c

@@ -11,11 +11,10 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/usb/pd.h>
+#include <linux/usb/tcpci.h>
 #include <linux/usb/tcpm.h>
 #include <linux/usb/typec.h>
 
-#include "tcpci.h"
-
 #define PD_ACTIVITY_TIMEOUT_MS				10000
 
 #define TCPC_VENDOR_ALERT				0x80

drivers/usb/typec/tcpm/tcpci_mt6360.c

@@ -11,10 +11,9 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/usb/tcpci.h>
 #include <linux/usb/tcpm.h>
 
-#include "tcpci.h"
-
 #define MT6360_REG_PHYCTRL1	0x80
 #define MT6360_REG_PHYCTRL3	0x82
 #define MT6360_REG_PHYCTRL7	0x86

drivers/usb/typec/tcpm/tcpci_rt1711h.c

@@ -10,9 +10,9 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/gpio/consumer.h>
+#include <linux/usb/tcpci.h>
 #include <linux/usb/tcpm.h>
 #include <linux/regmap.h>
-#include "tcpci.h"
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711

drivers/usb/typec/tcpm/tcpm.c

@@ -2705,6 +2705,13 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
 			port->sink_cap_done = true;
 			tcpm_set_state(port, ready_state(port), 0);
 			break;
+		/*
+		 * Some port partners do not support GET_STATUS, avoid soft reset the link to
+		 * prevent redundant power re-negotiation
+		 */
+		case GET_STATUS_SEND:
+			tcpm_set_state(port, ready_state(port), 0);
+			break;
 		case SRC_READY:
 		case SNK_READY:
 			if (port->vdm_state > VDM_STATE_READY) {

fs/erofs/zdata.c

@@ -828,6 +828,8 @@ hitted:
 	cur = end - min_t(erofs_off_t, offset + end - map->m_la, end);
 	if (!(map->m_flags & EROFS_MAP_MAPPED)) {
 		zero_user_segment(page, cur, end);
+		++spiltted;
+		tight = false;
 		goto next_part;
 	}
 

fs/ksmbd/oplock.c

@@ -1485,7 +1485,7 @@ struct create_context *smb2_find_context_vals(void *open_req, const char *tag, i
 		    name_len < 4 ||
 		    name_off + name_len > cc_len ||
 		    (value_off & 0x7) != 0 ||
-		    (value_off && (value_off < name_off + name_len)) ||
+		    (value_len && value_off < name_off + (name_len < 8 ? 8 : name_len)) ||
 		    ((u64)value_off + value_len > cc_len))
 			return ERR_PTR(-EINVAL);
 

fs/ksmbd/smb2pdu.c

@@ -4289,7 +4289,7 @@ static int smb2_get_ea(struct ksmbd_work *work, struct ksmbd_file *fp,
 		if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
 			name_len -= XATTR_USER_PREFIX_LEN;
 
-		ptr = (char *)(&eainfo->name + name_len + 1);
+		ptr = eainfo->name + name_len + 1;
 		buf_free_len -= (offsetof(struct smb2_ea_info, name) +
 				name_len + 1);
 		/* bailout if xattr can't fit in buf_free_len */

fs/ksmbd/smb2pdu.h

@@ -1567,7 +1567,7 @@ struct smb2_ea_info {
 	__u8   Flags;
 	__u8   EaNameLength;
 	__le16 EaValueLength;
-	char name[1];
+	char name[];
 	/* optionally followed by value */
 } __packed; /* level 15 Query */
 

fs/nilfs2/alloc.c

@@ -205,7 +205,8 @@ static int nilfs_palloc_get_block(struct inode *inode, unsigned long blkoff,
 	int ret;
 
 	spin_lock(lock);
-	if (prev->bh && blkoff == prev->blkoff) {
+	if (prev->bh && blkoff == prev->blkoff &&
+	    likely(buffer_uptodate(prev->bh))) {
 		get_bh(prev->bh);
 		*bhp = prev->bh;
 		spin_unlock(lock);

fs/nilfs2/inode.c

@@ -1029,7 +1029,7 @@ int nilfs_load_inode_block(struct inode *inode, struct buffer_head **pbh)
 	int err;
 
 	spin_lock(&nilfs->ns_inode_lock);
-	if (ii->i_bh == NULL) {
+	if (ii->i_bh == NULL || unlikely(!buffer_uptodate(ii->i_bh))) {
 		spin_unlock(&nilfs->ns_inode_lock);
 		err = nilfs_ifile_get_inode_block(ii->i_root->ifile,
 						  inode->i_ino, pbh);
@@ -1038,7 +1038,10 @@ int nilfs_load_inode_block(struct inode *inode, struct buffer_head **pbh)
 		spin_lock(&nilfs->ns_inode_lock);
 		if (ii->i_bh == NULL)
 			ii->i_bh = *pbh;
-		else {
+		else if (unlikely(!buffer_uptodate(ii->i_bh))) {
+			__brelse(ii->i_bh);
+			ii->i_bh = *pbh;
+		} else {
 			brelse(*pbh);
 			*pbh = ii->i_bh;
 		}

fs/nilfs2/segment.c

@@ -725,6 +725,11 @@ static size_t nilfs_lookup_dirty_data_buffers(struct inode *inode,
 		struct page *page = pvec.pages[i];
 
 		lock_page(page);
+		if (unlikely(page->mapping != mapping)) {
+			/* Exclude pages removed from the address space */
+			unlock_page(page);
+			continue;
+		}
 		if (!page_has_buffers(page))
 			create_empty_buffers(page, i_blocksize(inode), 0);
 		unlock_page(page);

include/linux/usb/tcpci.h

@@ -9,6 +9,7 @@
 #define __LINUX_USB_TCPCI_H
 
 #include <linux/usb/typec.h>
+#include <linux/usb/tcpm.h>
 
 #define TCPC_VENDOR_ID			0x0
 #define TCPC_PRODUCT_ID			0x2
@@ -102,6 +103,7 @@
 #define TCPC_POWER_STATUS_SINKING_VBUS	BIT(0)
 
 #define TCPC_FAULT_STATUS		0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
 
 #define TCPC_ALERT_EXTENDED		0x21
 

kernel/module.c

@@ -2249,12 +2249,20 @@ void *__symbol_get(const char *symbol)
 	};
 
 	preempt_disable();
-	if (!find_symbol(&fsa) || strong_try_module_get(fsa.owner)) {
-		preempt_enable();
-		return NULL;
+	if (!find_symbol(&fsa))
+		goto fail;
+	if (fsa.license != GPL_ONLY) {
+		pr_warn("failing symbol_get of non-GPLONLY symbol %s.\n",
+			symbol);
+		goto fail;
 	}
+	if (strong_try_module_get(fsa.owner))
+		goto fail;
 	preempt_enable();
 	return (void *)kernel_symbol_value(fsa.sym);
+fail:
+	preempt_enable();
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(__symbol_get);
 

sound/usb/stream.c

@@ -1093,6 +1093,7 @@ static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip,
 	int i, altno, err, stream;
 	struct audioformat *fp = NULL;
 	struct snd_usb_power_domain *pd = NULL;
+	bool set_iface_first;
 	int num, protocol;
 
 	dev = chip->dev;
@@ -1223,11 +1224,19 @@ static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip,
 				return err;
 		}
 
+		set_iface_first = false;
+		if (protocol == UAC_VERSION_1 ||
+		    (chip->quirk_flags & QUIRK_FLAG_SET_IFACE_FIRST))
+			set_iface_first = true;
+
 		/* try to set the interface... */
 		usb_set_interface(chip->dev, iface_no, 0);
+		if (set_iface_first)
+			usb_set_interface(chip->dev, iface_no, altno);
 		snd_usb_init_pitch(chip, fp);
 		snd_usb_init_sample_rate(chip, fp, fp->rate_max);
-		usb_set_interface(chip->dev, iface_no, altno);
+		if (!set_iface_first)
+			usb_set_interface(chip->dev, iface_no, altno);
 	}
 	return 0;
 }