From be59949d9bb47581f08ca3fec6a9f44a15ba9b37 Mon Sep 17 00:00:00 2001 From: Yinbo Zhu Date: Mon, 29 Jul 2019 14:46:07 +0800 Subject: [PATCH] usb: dwc3: remove the call trace of USBx_GFLADJ [ Upstream commit a7d9874c6f3fbc8d25cd9ceba35b6822612c4ebf ] layerscape board sometimes reported some usb call trace, that is due to kernel sent LPM tokerns automatically when it has no pending transfers and think that the link is idle enough to enter L1, which procedure will ask usb register has a recovery,then kernel will compare USBx_GFLADJ and set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if the conditions were met then issue occur, but whatever the conditions whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20 (xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source that generates the clock that drives the SOF counter, 0x20 is default value of it)That is normal logic, so need remove the call trace. Signed-off-by: Yinbo Zhu Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin --- drivers/usb/dwc3/core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f5c8c7f9c795..609d1d373b97 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -331,8 +331,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GFLADJ); dft = reg & DWC3_GFLADJ_30MHZ_MASK; #ifndef CONFIG_AMLOGIC_USB - if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj, - "request value same as default, ignoring\n")) { + if (dft != dwc->fladj) { #endif reg &= ~DWC3_GFLADJ_30MHZ_MASK; reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;