diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index ec27c6c9e737..e8698afcd952 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -22,6 +22,27 @@ Description: Exposes the "version" field of the 24x7 catalog. This is also extractable from the provided binary "catalog" sysfs entry. +What: /sys/devices/hv_24x7/interface/sockets +Date: May 2020 +Contact: Linux on PowerPC Developer List +Description: read only + This sysfs interface exposes the number of sockets present in the + system. + +What: /sys/devices/hv_24x7/interface/chipspersocket +Date: May 2020 +Contact: Linux on PowerPC Developer List +Description: read only + This sysfs interface exposes the number of chips per socket + present in the system. + +What: /sys/devices/hv_24x7/interface/coresperchip +Date: May 2020 +Contact: Linux on PowerPC Developer List +Description: read only + This sysfs interface exposes the number of cores per chip + present in the system. + What: /sys/bus/event_source/devices/hv_24x7/event_descs/ Date: February 2014 Contact: Linux on PowerPC Developer List diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 6b5dafab950c..77caf3ef82d3 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -574,3 +574,42 @@ Description: Secure Virtual Machine If 1, it means the system is using the Protected Execution Facility in POWER9 and newer processors. i.e., it is a Secure Virtual Machine. + +What: /sys/devices/system/cpu/cpuX/purr +Date: Apr 2005 +Contact: Linux for PowerPC mailing list +Description: PURR ticks for this CPU since the system boot. + + The Processor Utilization Resources Register (PURR) is + a 64-bit counter which provides an estimate of the + resources used by the CPU thread. The contents of this + register increases monotonically. This sysfs interface + exposes the number of PURR ticks for cpuX. + +What: /sys/devices/system/cpu/cpuX/spurr +Date: Dec 2006 +Contact: Linux for PowerPC mailing list +Description: SPURR ticks for this CPU since the system boot. + + The Scaled Processor Utilization Resources Register + (SPURR) is a 64-bit counter that provides a frequency + invariant estimate of the resources used by the CPU + thread. The contents of this register increases + monotonically. This sysfs interface exposes the number + of SPURR ticks for cpuX. + +What: /sys/devices/system/cpu/cpuX/idle_purr +Date: Apr 2020 +Contact: Linux for PowerPC mailing list +Description: PURR ticks for cpuX when it was idle. + + This sysfs interface exposes the number of PURR ticks + for cpuX when it was idle. + +What: /sys/devices/system/cpu/cpuX/idle_spurr +Date: Apr 2020 +Contact: Linux for PowerPC mailing list +Description: SPURR ticks for cpuX when it was idle. + + This sysfs interface exposes the number of SPURR ticks + for cpuX when it was idle. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 89386f6f3ab6..f3eeecbb3f63 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -874,6 +874,11 @@ can be useful when debugging issues that require an SLB miss to occur. + stress_slb [PPC] + Limits the number of kernel SLB entries, and flushes + them frequently to increase the rate of SLB faults + on kernel addresses. + disable= [IPV6] See Documentation/networking/ipv6.rst. diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst index 05e5f2dfb814..9c013299fd3b 100644 --- a/Documentation/arm/microchip.rst +++ b/Documentation/arm/microchip.rst @@ -192,7 +192,7 @@ Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards ar considered as "Unstable". To be completely clear, any at91 binding can change at any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from the same source tree. -Please refer to the Documentation/devicetree/bindings/ABI.txt file for a +Please refer to the Documentation/devicetree/bindings/ABI.rst file for a definition of a "Stable" binding/ABI. This statement will be removed by AT91 MAINTAINERS when appropriate. diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 1c4e1825d769..8548b0b04e43 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -217,14 +217,15 @@ This allows to collect coverage from two types of kernel background threads: the global ones, that are spawned during kernel boot in a limited number of instances (e.g. one USB hub_event() worker thread is spawned per USB HCD); and the local ones, that are spawned when a user interacts with -some kernel interface (e.g. vhost workers). +some kernel interface (e.g. vhost workers); as well as from soft +interrupts. -To enable collecting coverage from a global background thread, a unique -global handle must be assigned and passed to the corresponding -kcov_remote_start() call. Then a userspace process can pass a list of such -handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the -kcov_remote_arg struct. This will attach the used kcov device to the code -sections, that are referenced by those handles. +To enable collecting coverage from a global background thread or from a +softirq, a unique global handle must be assigned and passed to the +corresponding kcov_remote_start() call. Then a userspace process can pass +a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles +array field of the kcov_remote_arg struct. This will attach the used kcov +device to the code sections, that are referenced by those handles. Since there might be many local background threads spawned from different userspace processes, we can't use a single global handle per annotation. @@ -242,7 +243,7 @@ handles as they don't belong to a particular subsystem. The bytes 4-7 are currently reserved and must be zero. In the future the number of bytes used for the subsystem or handle ids might be increased. -When a particular userspace proccess collects coverage by via a common +When a particular userspace proccess collects coverage via a common handle, kcov will collect coverage for each code section that is annotated to use the common handle obtained as kcov_handle from the current task_struct. However non common handles allow to collect coverage diff --git a/Documentation/devicetree/bindings/ABI.txt b/Documentation/devicetree/bindings/ABI.rst similarity index 94% rename from Documentation/devicetree/bindings/ABI.txt rename to Documentation/devicetree/bindings/ABI.rst index d25f8d379680..a885713cf184 100644 --- a/Documentation/devicetree/bindings/ABI.txt +++ b/Documentation/devicetree/bindings/ABI.rst @@ -1,5 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 - Devicetree (DT) ABI +=================== +Devicetree (DT) ABI +=================== I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit summary document: diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 7782d9985082..a63898954068 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -4,11 +4,19 @@ DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u) +DT_SCHEMA_MIN_VERSION = 2020.5 + +PHONY += check_dtschema_version +check_dtschema_version: + @{ echo $(DT_SCHEMA_MIN_VERSION); \ + $(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -VC || \ + { echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; } + quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \ $(DT_EXTRACT_EX) $< > $@ -$(obj)/%.example.dts: $(src)/%.yaml FORCE +$(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE $(call if_changed,chk_binding) # Use full schemas when checking %.example.dts @@ -37,11 +45,11 @@ override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ -Wno-graph_child_address -$(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE +$(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE $(call if_changed,mk_schema) $(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG) -$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE +$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE $(call if_changed,mk_schema) extra-y += processed-schema.yaml diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 49e0362ddc11..b388c5aa7984 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - altr,socfpga-cyclone5 - - altr,socfpga-arria5 - - altr,socfpga-arria10 + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 - const: altr,socfpga ... diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index f74aba48cec1..378229fa8310 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -17,7 +17,7 @@ description: |+ any time. Be sure to use a device tree binary and a kernel image generated from the same source tree. - Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a + Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a stable binding/ABI. properties: @@ -107,6 +107,7 @@ properties: - amlogic,p231 - libretech,aml-s905d-pc - phicomm,n1 + - smartlabs,sml5442tw - const: amlogic,s905d - const: amlogic,meson-gxl @@ -148,6 +149,8 @@ properties: - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: + - azw,gtking + - azw,gtking-pro - hardkernel,odroid-n2 - khadas,vim3 - ugoos,am6 @@ -159,6 +162,7 @@ properties: - enum: - seirobotics,sei610 - khadas,vim3l + - hardkernel,odroid-c4 - const: amlogic,sm1 - description: Boards with the Amlogic Meson A1 A113L SoC diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index 66213bd95e6e..6cc74523ebfd 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -25,7 +25,7 @@ select: properties: compatible: - items: + items: - const: amlogic,meson-gx-ao-secure - const: syscon diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index dc102c4e4a78..1f293ea24cd8 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -14,7 +14,7 @@ Required properties: The scmi node with the following properties shall be under the /firmware/ node. -- compatible : shall be "arm,scmi" +- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports - mboxes: List of phandle and mailbox channel specifiers. It should contain exactly one or two mailboxes, one for transmitting messages("tx") and another optional for receiving the notifications("rx") if @@ -25,6 +25,7 @@ The scmi node with the following properties shall be under the /firmware/ node. protocol identifier for a given sub-node. - #size-cells : should be '0' as 'reg' property doesn't have any size associated with it. +- arm,smc-id : SMC id required when using smc or hvc transports Optional properties: diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index 8c06a73f716c..a3420c81cf35 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -131,26 +131,23 @@ properties: property, describing the physical location of the children nodes. 0 means motherboard site, while 1 and 2 are daughterboard sites, and 0xf means "sisterboard" which is the site containing the main CPU tile. - allOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - minimum: 0 - maximum: 15 + $ref: '/schemas/types.yaml#/definitions/uint32' + minimum: 0 + maximum: 15 arm,vexpress,position: description: When daughterboards are stacked on one site, their position in the stack be be described this attribute. - allOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - minimum: 0 - maximum: 3 + $ref: '/schemas/types.yaml#/definitions/uint32' + minimum: 0 + maximum: 3 arm,vexpress,dcc: description: When describing tiles consisting of more than one DCC, its number can be specified with this attribute. - allOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - minimum: 0 - maximum: 3 + $ref: '/schemas/types.yaml#/definitions/uint32' + minimum: 0 + maximum: 3 patternProperties: "^bus@[0-9a-f]+$": @@ -162,8 +159,7 @@ patternProperties: "simple-bus". If the compatible is placed in the "motherboard" node, it is stricter and always has two compatibles. type: object - allOf: - - $ref: '/schemas/simple-bus.yaml' + $ref: '/schemas/simple-bus.yaml' properties: compatible: @@ -195,11 +191,11 @@ patternProperties: - const: simple-bus arm,v2m-memory-map: description: This describes the memory map type. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rs1 - - rs2 + $ref: '/schemas/types.yaml#/definitions/string' + enum: + - rs1 + - rs2 + required: - compatible required: diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index 0357314076bc..31b0c54fa2cf 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -82,6 +82,13 @@ properties: - const: atmel,sama5d2 - const: atmel,sama5 + - description: Microchip SAMA5D2 Industrial Connectivity Platform + items: + - const: microchip,sama5d2-icp + - const: atmel,sama5d27 + - const: atmel,sama5d2 + - const: atmel,sama5 + - description: SAM9X60-EK board items: - const: microchip,sam9x60ek diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml index 0efdb4ac028e..5cd5b36cff2d 100644 --- a/Documentation/devicetree/bindings/arm/bitmain.yaml +++ b/Documentation/devicetree/bindings/arm/bitmain.yaml @@ -13,6 +13,6 @@ properties: compatible: items: - enum: - - bitmain,sophon-edge + - bitmain,sophon-edge - const: bitmain,bm1880 ... diff --git a/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml new file mode 100644 index 000000000000..dfdc97083efb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/calxeda/hb-sregs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank system registers + +description: | + The Calxeda Highbank system has a block of MMIO registers controlling + several generic system aspects. Those can be used to control some power + management, they also contain some gate and PLL clocks. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-sregs + + reg: + maxItems: 1 + + clocks: + type: object + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sregs@fff3c000 { + compatible = "calxeda,hb-sregs"; + reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt deleted file mode 100644 index 94e642a33db0..000000000000 --- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Calxeda Highbank L2 cache ECC - -Properties: -- compatible : Should be "calxeda,hb-sregs-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. - -Example: - - sregs@fff3c200 { - compatible = "calxeda,hb-sregs-l2-ecc"; - reg = <0xfff3c200 0x100>; - interrupts = <0 71 4 0 72 4>; - }; diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml new file mode 100644 index 000000000000..a9fe01238a88 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/calxeda/l2ecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank L2 cache ECC + +description: | + Binding for the Calxeda Highbank L2 cache controller ECC device. + This does not cover the actual L2 cache controller control registers, + but just the error reporting functionality. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: "calxeda,hb-sregs-l2-ecc" + + reg: + maxItems: 1 + + interrupts: + items: + - description: single bit error interrupt + - description: double bit error interrupt + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + sregs@fff3c200 { + compatible = "calxeda,hb-sregs-l2-ecc"; + reg = <0xfff3c200 0x100>; + interrupts = <0 71 4>, <0 72 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml index 3db3642bd532..17df5cd12d8d 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -140,16 +140,14 @@ patternProperties: maxItems: 1 arm,trig-in-sigs: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: List of CTI trigger in signal numbers in use by a trig-conns node. arm,trig-in-types: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: @@ -159,16 +157,14 @@ patternProperties: completely, then the types will default to GEN_IO. arm,trig-out-sigs: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: List of CTI trigger out signal numbers in use by a trig-conns node. arm,trig-out-types: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: @@ -178,8 +174,7 @@ patternProperties: or omitted completely, then the types will default to GEN_IO. arm,trig-filters: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: @@ -187,8 +182,7 @@ patternProperties: active, unless filtering is disabled on the driver. arm,trig-conn-name: - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string description: Defines a connection name that will be displayed, if the cpu or arm,cs-dev-assoc properties are not being used in this connection. @@ -301,7 +295,7 @@ examples: - | cti@20110000 { compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0 0x20110000 0 0x1000>; + reg = <0x20110000 0x1000>; clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index a01814765ddb..40f692c846f0 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -167,53 +167,53 @@ properties: - qcom,kryo260 - qcom,kryo280 - qcom,kryo385 + - qcom,kryo468 - qcom,kryo485 - qcom,scorpion enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - aspeed,ast2600-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - marvell,mmp3-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - ti,am3352 - - ti,am4372 + $ref: '/schemas/types.yaml#/definitions/string' + oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - marvell,mmp3-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + - ti,am3352 + - ti,am4372 cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64' diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index cd3fbe7e3948..05906e291e38 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -119,6 +119,7 @@ properties: - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite - fsl,imx6q-sabresd + - kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module - technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf - technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit - technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph @@ -170,6 +171,7 @@ properties: - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module - technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf - technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit - technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph @@ -177,7 +179,9 @@ properties: - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Module + - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6 Module on Colibri Evaluation Board V3 + - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3 - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index 5d1d50eea26e..6b8f4d4fa580 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -70,43 +70,39 @@ properties: description: Cycles of latency for Data RAM accesses. Specifies 3 cells of read, write and setup latencies. Minimum valid values are 1. Controllers without setup latency control should use a value of 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 arm,tag-latency: description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of read, write and setup latencies. Controllers without setup latency control should use 0. Controllers without separate read and write Tag RAM latency values should only use the first cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8 arm,dirty-latency: description: Cycles of latency for Dirty RAMs. This is a single cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8 arm,filter-ranges: description: Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 arm,io-coherent: description: indicates that the system is operating in an hardware @@ -131,36 +127,31 @@ properties: arm,double-linefill: description: Override double linefill enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,double-linefill-incr: description: Override double linefill on INCR read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,double-linefill-wrap: description: Override double linefill on WRAP read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,prefetch-drop: description: Override prefetch drop enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,prefetch-offset: description: Override prefetch offset value. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31] arm,shared-override: description: The default behavior of the L220 or PL310 cache @@ -193,35 +184,31 @@ properties: description: | Data prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] prefetch-instr: description: | Instruction prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,dynamic-clock-gating: description: | L2 dynamic clock gating. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,standby-mode: description: L2 standby mode enable. Value <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,early-bresp-disable: description: Disable the CA9 optimization Early BRESP (PL310) diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 4043c5046441..abc544dde692 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -84,6 +84,28 @@ properties: - enum: - mediatek,mt8135-evbp1 - const: mediatek,mt8135 + - description: Google Elm (Acer Chromebook R13) + items: + - const: google,elm-rev8 + - const: google,elm-rev7 + - const: google,elm-rev6 + - const: google,elm-rev5 + - const: google,elm-rev4 + - const: google,elm-rev3 + - const: google,elm + - const: mediatek,mt8173 + - description: Google Hana (Lenovo Chromebook N23 Yoga, C330, 300e,...) + items: + - const: google,hana-rev6 + - const: google,hana-rev5 + - const: google,hana-rev4 + - const: google,hana-rev3 + - const: google,hana + - const: mediatek,mt8173 + - description: Google Hana rev7 (Poin2 Chromebook 11C) + items: + - const: google,hana-rev7 + - const: mediatek,mt8173 - items: - enum: - mediatek,mt8173-evb diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 301eefbe1618..8d6a9d98e7a6 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -1,7 +1,8 @@ Mediatek mmsys controller ============================ -The Mediatek mmsys controller provides various clocks to the system. +The Mediatek mmsys system controller provides clock control, routing control, +and miscellaneous control in mmsys partition. Required Properties: @@ -15,13 +16,13 @@ Required Properties: - "mediatek,mt8183-mmsys", "syscon" - #clock-cells: Must be 1 -The mmsys controller uses the common clk binding from +For the clock control, the mmsys controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt The available clocks are defined in dt-bindings/clock/mt*-clk.h. Example: -mmsys: clock-controller@14000000 { +mmsys: syscon@14000000 { compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml index 07f39d3eee7e..f7f024910e71 100644 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items: - - enum: - - ea,ea3250 - - phytec,phy3250 - - const: nxp,lpc3250 - + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 ... diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 9247b58c26fc..8b77cf83a095 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -69,13 +69,11 @@ properties: method: description: The method of calling the PSCI firmware. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - enum: - # SMC #0, with the register assignments specified in this binding. - - smc - # HVC #0, with the register assignments specified in this binding. - - hvc + $ref: /schemas/types.yaml#/definitions/string-array + enum: + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc cpu_suspend: $ref: /schemas/types.yaml#/definitions/uint32 @@ -107,8 +105,8 @@ properties: patternProperties: "^power-domain-": - allOf: - - $ref: "../power/power-domain.yaml#" + $ref: "../power/power-domain.yaml#" + type: object description: | ARM systems can have multiple cores, sometimes in an hierarchical diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 64ddae3bd39f..6031aee0f5a8 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -37,6 +37,8 @@ description: | msm8994 msm8996 sc7180 + sdm630 + sdm660 sdm845 The 'board' element must be one of the following strings: @@ -153,6 +155,11 @@ properties: - qcom,sc7180-idp - const: qcom,sc7180 + - items: + - enum: + - xiaomi,lavender + - const: qcom,sdm660 + - items: - enum: - qcom,ipq6018-cp01-c1 diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml index ab59de17152d..845f9c76d6f7 100644 --- a/Documentation/devicetree/bindings/arm/realtek.yaml +++ b/Documentation/devicetree/bindings/arm/realtek.yaml @@ -14,6 +14,13 @@ properties: const: '/' compatible: oneOf: + # RTD1195 SoC based boards + - items: + - enum: + - mele,x1000 # MeLE X1000 + - realtek,horseradish # Realtek Horseradish EVB + - const: realtek,rtd1195 + # RTD1293 SoC based boards - items: - enum: @@ -25,6 +32,7 @@ properties: - enum: - mele,v9 # MeLE V9 - probox2,ava # ProBox2 AVA + - xnano,x5 # Xnano X5 - zidoo,x9s # Zidoo X9S - const: realtek,rtd1295 @@ -33,4 +41,17 @@ properties: - enum: - synology,ds418 # Synology DiskStation DS418 - const: realtek,rtd1296 + + # RTD1395 SoC based boards + - items: + - enum: + - bananapi,bpi-m4 # Banana Pi BPI-M4 + - realtek,lion-skin # Realtek Lion Skin EVB + - const: realtek,rtd1395 + + # RTD1619 SoC based boards + - items: + - enum: + - realtek,mjolnir # Realtek Mjolnir EVB + - const: realtek,rtd1619 ... diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml index dd087643a9f8..1f80767da38b 100644 --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml @@ -33,5 +33,5 @@ examples: - | prr: chipid@ff000044 { compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; + reg = <0xff000044 4>; }; diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 611094d9186b..b7d2e921150a 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -54,6 +54,16 @@ properties: - description: RZ/G1H (R8A77420) items: + - enum: + # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven) + - iwave,g21m + - const: renesas,r8a7742 + + - items: + - enum: + # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven) + - iwave,g21d + - const: iwave,g21m - const: renesas,r8a7742 - description: RZ/G1M (R8A77430) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 715586dea9bb..d4a4045092df 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -358,6 +358,11 @@ properties: - const: haoyu,marsboard-rk3066 - const: rockchip,rk3066a + - description: Hardkernel Odroid Go Advance + items: + - const: hardkernel,rk3326-odroid-go2 + - const: rockchip,rk3326 + - description: Hugsun X99 TV Box items: - const: hugsun,x99 diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index 0425d333b50d..f99c0c6df21b 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -22,9 +22,8 @@ properties: Adaptive Supply Voltage bin selection. This can be used to determine the ASV bin of an SoC if respective information is missing in the CHIPID registers or in the OTP memory. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - compatible diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 63acd57c4799..eb92f9eefaba 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -52,6 +52,7 @@ properties: items: - enum: - insignal,origen # Insignal Origen + - samsung,i9100 # Samsung Galaxy S2 (GT-I9100) - samsung,smdkv310 # Samsung SMDKV310 eval - samsung,trats # Samsung Tizen Reference - samsung,universal_c210 # Samsung C210 diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml index 65ad6d8a3c99..6caf1f9be390 100644 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -17,45 +17,46 @@ properties: - description: LD4 SoC boards items: - enum: - - socionext,uniphier-ld4-ref + - socionext,uniphier-ld4-ref - const: socionext,uniphier-ld4 - description: Pro4 SoC boards items: - enum: - - socionext,uniphier-pro4-ace - - socionext,uniphier-pro4-ref - - socionext,uniphier-pro4-sanji + - socionext,uniphier-pro4-ace + - socionext,uniphier-pro4-ref + - socionext,uniphier-pro4-sanji - const: socionext,uniphier-pro4 - description: sLD8 SoC boards items: - enum: - - socionext,uniphier-sld8-ref + - socionext,uniphier-sld8-ref - const: socionext,uniphier-sld8 - description: PXs2 SoC boards items: - enum: - - socionext,uniphier-pxs2-gentil - - socionext,uniphier-pxs2-vodka + - socionext,uniphier-pxs2-gentil + - socionext,uniphier-pxs2-vodka - const: socionext,uniphier-pxs2 - description: LD6b SoC boards items: - enum: - - socionext,uniphier-ld6b-ref + - socionext,uniphier-ld6b-ref - const: socionext,uniphier-ld6b - description: LD11 SoC boards items: - enum: - - socionext,uniphier-ld11-global - - socionext,uniphier-ld11-ref + - socionext,uniphier-ld11-global + - socionext,uniphier-ld11-ref - const: socionext,uniphier-ld11 - description: LD20 SoC boards items: - enum: - - socionext,uniphier-ld20-global - - socionext,uniphier-ld20-ref + - socionext,uniphier-ld20-akebi96 + - socionext,uniphier-ld20-global + - socionext,uniphier-ld20-ref - const: socionext,uniphier-ld20 - description: PXs3 SoC boards items: - enum: - - socionext,uniphier-pxs3-ref + - socionext,uniphier-pxs3-ref - const: socionext,uniphier-pxs3 diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 55f7938c4826..9f276bc9efa0 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -20,7 +20,7 @@ description: | [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index baff80197d5a..cf5db5e273f3 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -14,9 +14,9 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32mp157-syscfg - - const: syscon + - enum: + - st,stm32mp157-syscfg + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 1fcf306bd2d1..790e6dd48e34 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -38,6 +38,9 @@ properties: - items: - enum: - arrow,stm32mp157a-avenger96 # Avenger96 + - lxa,stm32mp157c-mc1 + - shiratech,stm32mp157a-iot-box # IoT Box + - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 - st,stm32mp157a-dk1 - st,stm32mp157c-dk2 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index abf2d97fb7ae..87817ff0cd35 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -561,6 +561,11 @@ properties: - const: olimex,a20-olinuxino-lime - const: allwinner,sun7i-a20 + - description: Olimex A20-OlinuXino LIME (with eMMC) + items: + - const: olimex,a20-olinuxino-lime-emmc + - const: allwinner,sun7i-a20 + - description: Olimex A20-OlinuXino LIME2 items: - const: olimex,a20-olinuxino-lime2 diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt index 2face46a5f64..d8b48f2edf1b 100644 --- a/Documentation/devicetree/bindings/arm/syna.txt +++ b/Documentation/devicetree/bindings/arm/syna.txt @@ -13,7 +13,7 @@ considered "unstable". Any Marvell Berlin device tree binding may change at any time. Be sure to use a device tree binary and a kernel image generated from the same source tree. -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a +Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a stable binding/ABI. --------------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index f17bb353f65e..81534d04094b 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -323,7 +323,7 @@ examples: tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; + reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml index bfc6357476fd..6451928dd2ce 100644 --- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml @@ -26,8 +26,8 @@ properties: oneOf: - const: faraday,ftide010 - items: - - const: cortina,gemini-pata - - const: faraday,ftide010 + - const: cortina,gemini-pata + - const: faraday,ftide010 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml index 7b69831060d8..d06096a7ba4b 100644 --- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml +++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml @@ -17,6 +17,7 @@ properties: - renesas,sata-r8a7779 # R-Car H1 - items: - enum: + - renesas,sata-r8a7742 # RZ/G1H - renesas,sata-r8a7790-es1 # R-Car H2 ES1 - renesas,sata-r8a7790 # R-Car H2 other than ES1 - renesas,sata-r8a7791 # R-Car M2-W diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt deleted file mode 100644 index aa83407cb7a4..000000000000 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ /dev/null @@ -1,44 +0,0 @@ -* Calxeda AHCI SATA Controller - -SATA nodes are defined to describe on-chip Serial ATA controllers. -The Calxeda SATA controller mostly conforms to the AHCI interface -with some special extensions to add functionality. -Each SATA controller should have its own node. - -Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" -- interrupts : -- reg : - -Optional properties: -- dma-coherent : Present if dma operations are coherent -- calxeda,port-phys : phandle-combophy and lane assignment, which maps each - SATA port to a combophy and a lane within that - combophy -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, - which indicates that the driver supports SGPIO - indicator lights using the indicated GPIOs -- calxeda,led-order : a u32 array that map port numbers to offsets within the - SGPIO bitstream. -- calxeda,tx-atten : a u32 array that contains TX attenuation override - codes, one per port. The upper 3 bytes are always - 0 and thus ignored. -- calxeda,pre-clocks : a u32 that indicates the number of additional clock - cycles to transmit before sending an SGPIO pattern -- calxeda,post-clocks: a u32 that indicates the number of additional clock - cycles to transmit after sending an SGPIO pattern - -Example: - sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; - dma-coherent; - calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 - &combophy0 2 &combophy0 3>; - calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; - calxeda,led-order = <4 0 1 2 3>; - calxeda,tx-atten = <0xff 22 0xff 0xff 23>; - calxeda,pre-clocks = <10>; - calxeda,post-clocks = <0>; - }; diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml new file mode 100644 index 000000000000..b195457006cc --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/sata_highbank.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda AHCI SATA Controller + +description: | + The Calxeda SATA controller mostly conforms to the AHCI interface + with some special extensions to add functionality, to map GPIOs for + activity LEDs and for mapping the ComboPHYs. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-ahci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dma-coherent: true + + calxeda,pre-clocks: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Indicates the number of additional clock cycles to transmit before + sending an SGPIO pattern. + + calxeda,post-clocks: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Indicates the number of additional clock cycles to transmit after + sending an SGPIO pattern. + + calxeda,led-order: + description: Maps port numbers to offsets within the SGPIO bitstream. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 8 + + calxeda,port-phys: + description: | + phandle-combophy and lane assignment, which maps each SATA port to a + combophy and a lane within that combophy + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - minItems: 1 + maxItems: 8 + + calxeda,tx-atten: + description: | + Contains TX attenuation override codes, one per port. + The upper 24 bits of each entry are always 0 and thus ignored. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 8 + + calxeda,sgpio-gpio: + description: | + phandle-gpio bank, bit offset, and default on or off, which indicates + that the driver supports SGPIO indicator lights using the indicated + GPIOs. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; + dma-coherent; + calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>, + <&combophy0 2>, <&combophy0 3>; + calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>; + calxeda,led-order = <4 0 1 2 3>; + calxeda,tx-atten = <0xff 22 0xff 0xff 23>; + calxeda,pre-clocks = <10>; + calxeda,post-clocks = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt deleted file mode 100644 index 2aa24b889923..000000000000 --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt +++ /dev/null @@ -1,45 +0,0 @@ -DT bindings for the Hitachi HD44780 Character LCD Controller - -The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs -that can display one or more lines of text. It exposes an M6800 bus interface, -which can be used in either 4-bit or 8-bit mode. - -Required properties: - - compatible: Must contain "hit,hd44780", - - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers, - referring to the GPIO pins connected to the data signal lines DB0-DB7 - (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface, - - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin - connected to the "E" (Enable) signal line of the LCD Controller's bus - interface, - - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin - connected to the "RS" (Register Select) signal line of the LCD Controller's - bus interface, - - display-height-chars: Height of the display, in character cells, - - display-width-chars: Width of the display, in character cells. - -Optional properties: - - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin - connected to the "RW" (Read/Write) signal line of the LCD Controller's bus - interface, - - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin - used for enabling the LCD's backlight, - - internal-buffer-width: Internal buffer width (default is 40 for displays - with 1 or 2 lines, and display-width-chars for displays with more than 2 - lines). - -Example: - - auxdisplay { - compatible = "hit,hd44780"; - - data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, - <&hc595 1 GPIO_ACTIVE_HIGH>, - <&hc595 2 GPIO_ACTIVE_HIGH>, - <&hc595 3 GPIO_ACTIVE_HIGH>; - enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; - rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; - - display-height-chars = <2>; - display-width-chars = <16>; - }; diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml new file mode 100644 index 000000000000..9222b06e93a0 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hitachi HD44780 Character LCD Controller + +maintainers: + - Geert Uytterhoeven + +description: + The Hitachi HD44780 Character LCD Controller is commonly used on character + LCDs that can display one or more lines of text. It exposes an M6800 bus + interface, which can be used in either 4-bit or 8-bit mode. + +properties: + compatible: + const: hit,hd44780 + + data-gpios: + description: + GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or + DB4-DB7 (4-bit mode) of the LCD Controller's bus interface. + oneOf: + - maxItems: 4 + - maxItems: 8 + + enable-gpios: + description: + GPIO pin connected to the "E" (Enable) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + rs-gpios: + description: + GPIO pin connected to the "RS" (Register Select) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + rw-gpios: + description: + GPIO pin connected to the "RW" (Read/Write) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + backlight-gpios: + description: GPIO pin used for enabling the LCD's backlight. + maxItems: 1 + + display-height-chars: + description: Height of the display, in character cells, + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + display-width-chars: + description: Width of the display, in character cells. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 64 + + internal-buffer-width: + description: + Internal buffer width (default is 40 for displays with 1 or 2 lines, and + display-width-chars for displays with more than 2 lines). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 64 + +required: + - compatible + - data-gpios + - enable-gpios + - rs-gpios + - display-height-chars + - display-width-chars + +additionalProperties: false + +examples: + - | + #include + auxdisplay { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; + }; diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index f0b3d30fbb76..0503651cd214 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -31,12 +31,11 @@ properties: maxItems: 1 allwinner,sram: - allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array - - maxItems: 1 description: The SRAM that needs to be claimed to access the display engine bus. + $ref: /schemas/types.yaml#definitions/phandle-array + maxItems: 1 ranges: true diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 80973619342d..32d33b983d66 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -21,8 +21,8 @@ properties: oneOf: - const: allwinner,sun8i-a23-rsb - items: - - const: allwinner,sun8i-a83t-rsb - - const: allwinner,sun8i-a23-rsb + - const: allwinner,sun8i-a83t-rsb + - const: allwinner,sun8i-a23-rsb reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml new file mode 100644 index 000000000000..47227427c1c0 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Integrator/AP Logic Module extension bus + +maintainers: + - Linus Walleij + +description: The Integrator/AP is a prototyping platform and as such has a + site for stacking up to four logic modules (LM) designed specifically for + use with this platform. A special system controller register can be read to + determine if a logic module is connected at index 0, 1, 2 or 3. The logic + module connector is described in this binding. The logic modules per se + then have their own specific per-module bindings and they will be described + as subnodes under this logic module extension bus. + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + compatible: + items: + - const: arm,integrator-ap-lm + + ranges: true + dma-ranges: true + +patternProperties: + "^bus(@[0-9a-f]*)?$": + description: Nodes on the Logic Module bus represent logic modules + and are named with bus. The first module is at 0xc0000000, the second + at 0xd0000000 and so on until the top of the memory of the system at + 0xffffffff. All information about the memory used by the module is + in ranges and dma-ranges. + type: object + + required: + - compatible + +required: + - compatible + +examples: + - | + bus@c0000000 { + compatible = "arm,integrator-ap-lm"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc0000000 0xc0000000 0x40000000>; + dma-ranges; + + bus@c0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xc0000000 0x10000000>; + /* The Logic Modules sees the Core Module 0 RAM @80000000 */ + dma-ranges = <0x00000000 0x80000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + serial@100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00100000 0x1000>; + interrupts-extended = <&impd1_vic 1>; + }; + + impd1_vic: interrupt-controller@3000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x03000000 0x1000>; + valid-mask = <0x00000bff>; + interrupts-extended = <&pic 9>; + }; + }; + }; + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml new file mode 100644 index 000000000000..d6a3b71ea835 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/baikal,bt1-apb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 APB-bus + +maintainers: + - Serge Semin + +description: | + Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI Interconnect + which routes them to the AXI-APB bridge. This interface is a single master + multiple slaves bus in turn serializing IO accesses and routing them to the + addressed APB slave devices. In case of any APB protocol collisions, slave + device not responding on timeout an IRQ is raised with an erroneous address + reported to the APB terminator (APB Errors Handler Block). + +allOf: + - $ref: /schemas/simple-bus.yaml# + +properties: + compatible: + contains: + const: baikal,bt1-apb + + reg: + items: + - description: APB EHB MMIO registers + - description: APB MMIO region with no any device mapped + + reg-names: + items: + - const: ehb + - const: nodev + + interrupts: + maxItems: 1 + + clocks: + items: + - description: APB reference clock + + clock-names: + items: + - const: pclk + + resets: + items: + - description: APB domain reset line + + reset-names: + items: + - const: prst + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +examples: + - | + #include + + bus@1f059000 { + compatible = "baikal,bt1-apb", "simple-bus"; + reg = <0 0x1f059000 0 0x1000>, + <0 0x1d000000 0 0x2040000>; + reg-names = "ehb", "nodev"; + #address-cells = <1>; + #size-cells = <1>; + + ranges; + + interrupts = ; + + clocks = <&ccu_sys 1>; + clock-names = "pclk"; + + resets = <&ccu_sys 1>; + reset-names = "prst"; + }; +... diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml new file mode 100644 index 000000000000..203bc0e5346b --- /dev/null +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 AXI-bus + +maintainers: + - Serge Semin + +description: | + AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all + high-speed peripheral IP-cores with RAM controller and with MIPS P5600 + cores. Traffic arbitration is done by means of DW AXI Interconnect (so + called AXI Main Interconnect) routing IO requests from one block to + another: from CPU to SoC peripherals and between some SoC peripherals + (mostly between peripheral devices and RAM, but also between DMA and + some peripherals). In case of any protocol error, device not responding + an IRQ is raised and a faulty situation is reported to the AXI EHB + (Errors Handler Block) embedded on top of the DW AXI Interconnect and + accessible by means of the Baikal-T1 System Controller. + +allOf: + - $ref: /schemas/simple-bus.yaml# + +properties: + compatible: + contains: + const: baikal,bt1-axi + + reg: + minItems: 1 + items: + - description: Synopsys DesignWare AXI Interconnect QoS registers + - description: AXI EHB MMIO system controller registers + + reg-names: + minItems: 1 + items: + - const: qos + - const: ehb + + '#interconnect-cells': + const: 1 + + syscon: + $ref: /schemas/types.yaml#definitions/phandle + description: Phandle to the Baikal-T1 System Controller DT node + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main Interconnect uplink reference clock + + clock-names: + items: + - const: aclk + + resets: + items: + - description: Main Interconnect reset line + + reset-names: + items: + - const: arst + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - syscon + - interrupts + - clocks + - clock-names + +examples: + - | + #include + + bus@1f05a000 { + compatible = "baikal,bt1-axi", "simple-bus"; + reg = <0 0x1f05a000 0 0x1000>, + <0 0x1f04d110 0 0x8>; + reg-names = "qos", "ehb"; + #address-cells = <1>; + #size-cells = <1>; + #interconnect-cells = <1>; + + syscon = <&syscon>; + + ranges; + + interrupts = ; + + clocks = <&ccu_axi 0>; + clock-names = "aclk"; + + resets = <&ccu_axi 0>; + reset-names = "arst"; + }; +... diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml index ed1b2126a81b..9a37a357cb4e 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk - items: - - const: allwinner,sun5i-a13-dram-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk - items: - - const: allwinner,sun8i-h3-apb0-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml index 8559fe8f7efd..228c9313df53 100644 --- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml @@ -65,7 +65,7 @@ examples: - | uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; - reg = <0x0 0x58018000 0x0 0x2000>; + reg = <0x58018000 0x2000>; clocks = <&clk 45>, <&clk 46>; clock-names = "baudclk", "apb_pclk"; interrupts = <0 9 4>; diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt deleted file mode 100644 index 0a6ac1bdcda1..000000000000 --- a/Documentation/devicetree/bindings/clock/calxeda.txt +++ /dev/null @@ -1,17 +0,0 @@ -Device Tree Clock bindings for Calxeda highbank platform - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "calxeda,hb-pll-clock" - for a PLL clock - "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the - A9 clock. - "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock. - "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller. -- reg : shall be the control register offset from SYSREGs base for the clock. -- clocks : shall be the input parent clock phandle for the clock. This is - either an oscillator or a pll output. -- #clock-cells : from common clock binding; shall be set to 0. diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml new file mode 100644 index 000000000000..a34cbf3c9aaf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/calxeda.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Clock bindings for Calxeda highbank platform + +description: | + This binding covers the Calxeda SoC internal peripheral and bus clocks + as used by peripherals. The clocks live inside the "system register" + region of the SoC, so are typically presented as children of an + "hb-sregs" node. + +maintainers: + - Andre Przywara + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - calxeda,hb-pll-clock + - calxeda,hb-a9periph-clock + - calxeda,hb-a9bus-clock + - calxeda,hb-emmc-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - clocks + - reg + +additionalProperties: false + +examples: + - | + sregs@3fffc000 { + compatible = "calxeda,hb-sregs"; + reg = <0x3fffc000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll@108 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll@100 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk@104 { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt deleted file mode 100644 index 52a064c789ee..000000000000 --- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt +++ /dev/null @@ -1,94 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the clock portion of -the driver. - -Also see these documents for generic binding information: - [1] Clock : ../clock/clock-bindings.txt - -And these for relevant defines: - [2] include/dt-bindings/clock/lochnagar.h - -This binding must be part of the Lochnagar MFD binding: - [3] ../mfd/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar1-clk" - "cirrus,lochnagar2-clk" - - - #clock-cells : Must be 1. The first cell indicates the clock - number, see [2] for available clocks and [1]. - -Optional properties: - - - clocks : Must contain an entry for each clock in clock-names. - - clock-names : May contain entries for each of the following - clocks: - - ln-cdc-clkout : Output clock from CODEC card. - - ln-dsp-clkout : Output clock from DSP card. - - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional - input audio clocks from host system. - - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from - external connector. - - ln-spdif-mclk : Optional input audio clock from SPDIF. - - ln-spdif-clkout : Optional input audio clock from SPDIF. - - ln-adat-mclk : Optional input audio clock from ADAT. - - ln-pmic-32k : On board fixed clock. - - ln-clk-12m : On board fixed clock. - - ln-clk-11m : On board fixed clock. - - ln-clk-24m : On board fixed clock. - - ln-clk-22m : On board fixed clock. - - ln-clk-8m : On board fixed clock. - - ln-usb-clk-24m : On board fixed clock. - - ln-usb-clk-12m : On board fixed clock. - - - assigned-clocks : A list of Lochnagar clocks to be reparented, see - [2] for available clocks. - - assigned-clock-parents : Parents to be assigned to the clocks - listed in "assigned-clocks". - -Optional nodes: - - - fixed-clock nodes may be registered for the following on board clocks: - - ln-pmic-32k : 32768 Hz - - ln-clk-12m : 12288000 Hz - - ln-clk-11m : 11298600 Hz - - ln-clk-24m : 24576000 Hz - - ln-clk-22m : 22579200 Hz - - ln-clk-8m : 8192000 Hz - - ln-usb-clk-24m : 24576000 Hz - - ln-usb-clk-12m : 12288000 Hz - -Example: - -lochnagar { - lochnagar-clk { - compatible = "cirrus,lochnagar2-clk"; - - #clock-cells = <1>; - - clocks = <&clk-audio>, <&clk_pmic>; - clock-names = "ln-gf-mclk2", "ln-pmic-32k"; - - assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>, - <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>; - assigned-clock-parents = <&clk-audio>, - <&clk-pmic>; - }; - - clk-pmic: clk-pmic { - compatible = "fixed-clock"; - clock-cells = <0>; - clock-frequency = <32768>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..59de125647ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the clock portion of the + driver. + + Also see these documents for generic binding information: + [1] Clock : ../clock/clock-bindings.txt + + And these for relevant defines: + [2] include/dt-bindings/clock/lochnagar.h + + This binding must be part of the Lochnagar MFD binding: + [3] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar1-clk + - cirrus,lochnagar2-clk + + '#clock-cells': + description: + The first cell indicates the clock number, see [2] for available + clocks and [1]. + const: 1 + + clock-names: + items: + enum: + - ln-cdc-clkout # Output clock from CODEC card. + - ln-dsp-clkout # Output clock from DSP card. + - ln-gf-mclk1 # Optional input clock from host system. + - ln-gf-mclk2 # Optional input clock from host system. + - ln-gf-mclk3 # Optional input clock from host system. + - ln-gf-mclk4 # Optional input clock from host system. + - ln-psia1-mclk # Optional input clock from external connector. + - ln-psia2-mclk # Optional input clock from external connector. + - ln-spdif-mclk # Optional input clock from SPDIF. + - ln-spdif-clkout # Optional input clock from SPDIF. + - ln-adat-mclk # Optional input clock from ADAT. + - ln-pmic-32k # On board fixed clock. + - ln-clk-12m # On board fixed clock. + - ln-clk-11m # On board fixed clock. + - ln-clk-24m # On board fixed clock. + - ln-clk-22m # On board fixed clock. + - ln-clk-8m # On board fixed clock. + - ln-usb-clk-24m # On board fixed clock. + - ln-usb-clk-12m # On board fixed clock. + minItems: 1 + maxItems: 19 + + clocks: true + assigned-clocks: true + assigned-clock-parents: true + +additionalProperties: false + +required: + - compatible + - '#clock-cells' diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml index b567f8092f8c..f415845b38dd 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -24,9 +24,8 @@ properties: clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 clock-mult: description: Fixed multiplier diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml index a203d5d498db..9ac716dfa602 100644 --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -28,15 +28,14 @@ properties: const: 0 fsl,vco-hz: - description: Optional for VCO frequency of the PLL in Hertz. - The VCO frequency of this PLL cannot be changed during runtime - only at startup. Therefore, the output frequencies are very - limited and might not even closely match the requested frequency. - To work around this restriction the user may specify its own - desired VCO frequency for the PLL. - minimum: 650000000 - maximum: 1300000000 - default: 1188000000 + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 required: - compatible @@ -51,7 +50,7 @@ examples: - | dpclk: clock-display@f1f0000 { compatible = "fsl,ls1028a-plldig"; - reg = <0x0 0xf1f0000 0x0 0xffff>; + reg = <0xf1f0000 0xffff>; #clock-cells = <0>; clocks = <&osc_27m>; }; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt deleted file mode 100644 index 9823baf7acb6..000000000000 --- a/Documentation/devicetree/bindings/clock/imx1-clock.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Clock bindings for Freescale i.MX1 CPUs - -Required properties: -- compatible: Should be "fsl,imx1-ccm". -- reg: Address and length of the register set. -- #clock-cells: Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h -for the full list of i.MX1 clock IDs. - -Examples: - clks: ccm@21b000 { - #clock-cells = <1>; - compatible = "fsl,imx1-ccm"; - reg = <0x0021b000 0x1000>; - }; - - pwm: pwm@208000 { - #pwm-cells = <2>; - compatible = "fsl,imx1-pwm"; - reg = <0x00208000 0x1000>; - interrupts = <34>; - clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml new file mode 100644 index 000000000000..f4833a29b79e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx1-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX1 CPUs + +maintainers: + - Alexander Shiyan + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h + for the full list of i.MX1 clock IDs. + +properties: + compatible: + const: fsl,imx1-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + + clock-controller@21b000 { + #clock-cells = <1>; + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + }; + + pwm@208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt deleted file mode 100644 index 806f63d628bd..000000000000 --- a/Documentation/devicetree/bindings/clock/imx21-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Clock bindings for Freescale i.MX21 - -Required properties: -- compatible : Should be "fsl,imx21-ccm". -- reg : Address and length of the register set. -- interrupts : Should contain CCM interrupt. -- #clock-cells: Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h -for the full list of i.MX21 clock IDs. - -Examples: - clks: ccm@10027000{ - compatible = "fsl,imx21-ccm"; - reg = <0x10027000 0x800>; - #clock-cells = <1>; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, - <&clks IMX21_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml new file mode 100644 index 000000000000..518ad9a4733c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx21-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX21 + +maintainers: + - Alexander Shiyan + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h + for the full list of i.MX21 clock IDs. + +properties: + compatible: + const: fsl,imx21-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + + clock-controller@10027000 { + compatible = "fsl,imx21-ccm"; + reg = <0x10027000 0x800>; + #clock-cells = <1>; + }; + + serial@1000a000 { + compatible = "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, + <&clks IMX21_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt deleted file mode 100644 index 8385348d3bd9..000000000000 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Clock bindings for Freescale i.MX23 - -Required properties: -- compatible: Should be "fsl,imx23-clkctrl" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX23 -clocks and IDs. - - Clock ID - ------------------ - ref_xtal 0 - pll 1 - ref_cpu 2 - ref_emi 3 - ref_pix 4 - ref_io 5 - saif_sel 6 - lcdif_sel 7 - gpmi_sel 8 - ssp_sel 9 - emi_sel 10 - cpu 11 - etm_sel 12 - cpu_pll 13 - cpu_xtal 14 - hbus 15 - xbus 16 - lcdif_div 17 - ssp_div 18 - gpmi_div 19 - emi_pll 20 - emi_xtal 21 - etm_div 22 - saif_div 23 - clk32k_div 24 - rtc 25 - adc 26 - spdif_div 27 - clk32k 28 - dri 29 - pwm 30 - filt 31 - uart 32 - ssp 33 - gpmi 34 - spdif 35 - emi 36 - saif 37 - lcdif 38 - etm 39 - usb 40 - usb_phy 41 - -Examples: - -clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; -}; - -auart0: serial@8006c000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006c000 0x2000>; - interrupts = <24 25 23>; - clocks = <&clks 32>; -}; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml new file mode 100644 index 000000000000..66cb238a1040 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx23-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX23 + +maintainers: + - Shawn Guo + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX23 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_phy 41 + +properties: + compatible: + const: fsl,imx23-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; + clocks = <&clks 32>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt deleted file mode 100644 index f8135ea9ca4e..000000000000 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ /dev/null @@ -1,160 +0,0 @@ -* Clock bindings for Freescale i.MX25 - -Required properties: -- compatible: Should be "fsl,imx25-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX25 -clocks and IDs. - - Clock ID - --------------------------- - dummy 0 - osc 1 - mpll 2 - upll 3 - mpll_cpu_3_4 4 - cpu_sel 5 - cpu 6 - ahb 7 - usb_div 8 - ipg 9 - per0_sel 10 - per1_sel 11 - per2_sel 12 - per3_sel 13 - per4_sel 14 - per5_sel 15 - per6_sel 16 - per7_sel 17 - per8_sel 18 - per9_sel 19 - per10_sel 20 - per11_sel 21 - per12_sel 22 - per13_sel 23 - per14_sel 24 - per15_sel 25 - per0 26 - per1 27 - per2 28 - per3 29 - per4 30 - per5 31 - per6 32 - per7 33 - per8 34 - per9 35 - per10 36 - per11 37 - per12 38 - per13 39 - per14 40 - per15 41 - csi_ipg_per 42 - epit_ipg_per 43 - esai_ipg_per 44 - esdhc1_ipg_per 45 - esdhc2_ipg_per 46 - gpt_ipg_per 47 - i2c_ipg_per 48 - lcdc_ipg_per 49 - nfc_ipg_per 50 - owire_ipg_per 51 - pwm_ipg_per 52 - sim1_ipg_per 53 - sim2_ipg_per 54 - ssi1_ipg_per 55 - ssi2_ipg_per 56 - uart_ipg_per 57 - ata_ahb 58 - reserved 59 - csi_ahb 60 - emi_ahb 61 - esai_ahb 62 - esdhc1_ahb 63 - esdhc2_ahb 64 - fec_ahb 65 - lcdc_ahb 66 - rtic_ahb 67 - sdma_ahb 68 - slcdc_ahb 69 - usbotg_ahb 70 - reserved 71 - reserved 72 - reserved 73 - reserved 74 - can1_ipg 75 - can2_ipg 76 - csi_ipg 77 - cspi1_ipg 78 - cspi2_ipg 79 - cspi3_ipg 80 - dryice_ipg 81 - ect_ipg 82 - epit1_ipg 83 - epit2_ipg 84 - reserved 85 - esdhc1_ipg 86 - esdhc2_ipg 87 - fec_ipg 88 - reserved 89 - reserved 90 - reserved 91 - gpt1_ipg 92 - gpt2_ipg 93 - gpt3_ipg 94 - gpt4_ipg 95 - reserved 96 - reserved 97 - reserved 98 - iim_ipg 99 - reserved 100 - reserved 101 - kpp_ipg 102 - lcdc_ipg 103 - reserved 104 - pwm1_ipg 105 - pwm2_ipg 106 - pwm3_ipg 107 - pwm4_ipg 108 - rngb_ipg 109 - reserved 110 - scc_ipg 111 - sdma_ipg 112 - sim1_ipg 113 - sim2_ipg 114 - slcdc_ipg 115 - spba_ipg 116 - ssi1_ipg 117 - ssi2_ipg 118 - tsc_ipg 119 - uart1_ipg 120 - uart2_ipg 121 - uart3_ipg 122 - uart4_ipg 123 - uart5_ipg 124 - reserved 125 - wdt_ipg 126 - cko_div 127 - cko_sel 128 - cko 129 - -Examples: - -clks: ccm@53f80000 { - compatible = "fsl,imx25-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; -}; - -uart1: serial@43f90000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 79>, <&clks 50>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml new file mode 100644 index 000000000000..2a2b10778e72 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx25-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX25 + +maintainers: + - Sascha Hauer + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX25 + clocks and IDs. + + Clock ID + -------------------------- + dummy 0 + osc 1 + mpll 2 + upll 3 + mpll_cpu_3_4 4 + cpu_sel 5 + cpu 6 + ahb 7 + usb_div 8 + ipg 9 + per0_sel 10 + per1_sel 11 + per2_sel 12 + per3_sel 13 + per4_sel 14 + per5_sel 15 + per6_sel 16 + per7_sel 17 + per8_sel 18 + per9_sel 19 + per10_sel 20 + per11_sel 21 + per12_sel 22 + per13_sel 23 + per14_sel 24 + per15_sel 25 + per0 26 + per1 27 + per2 28 + per3 29 + per4 30 + per5 31 + per6 32 + per7 33 + per8 34 + per9 35 + per10 36 + per11 37 + per12 38 + per13 39 + per14 40 + per15 41 + csi_ipg_per 42 + epit_ipg_per 43 + esai_ipg_per 44 + esdhc1_ipg_per 45 + esdhc2_ipg_per 46 + gpt_ipg_per 47 + i2c_ipg_per 48 + lcdc_ipg_per 49 + nfc_ipg_per 50 + owire_ipg_per 51 + pwm_ipg_per 52 + sim1_ipg_per 53 + sim2_ipg_per 54 + ssi1_ipg_per 55 + ssi2_ipg_per 56 + uart_ipg_per 57 + ata_ahb 58 + reserved 59 + csi_ahb 60 + emi_ahb 61 + esai_ahb 62 + esdhc1_ahb 63 + esdhc2_ahb 64 + fec_ahb 65 + lcdc_ahb 66 + rtic_ahb 67 + sdma_ahb 68 + slcdc_ahb 69 + usbotg_ahb 70 + reserved 71 + reserved 72 + reserved 73 + reserved 74 + can1_ipg 75 + can2_ipg 76 + csi_ipg 77 + cspi1_ipg 78 + cspi2_ipg 79 + cspi3_ipg 80 + dryice_ipg 81 + ect_ipg 82 + epit1_ipg 83 + epit2_ipg 84 + reserved 85 + esdhc1_ipg 86 + esdhc2_ipg 87 + fec_ipg 88 + reserved 89 + reserved 90 + reserved 91 + gpt1_ipg 92 + gpt2_ipg 93 + gpt3_ipg 94 + gpt4_ipg 95 + reserved 96 + reserved 97 + reserved 98 + iim_ipg 99 + reserved 100 + reserved 101 + kpp_ipg 102 + lcdc_ipg 103 + reserved 104 + pwm1_ipg 105 + pwm2_ipg 106 + pwm3_ipg 107 + pwm4_ipg 108 + rngb_ipg 109 + reserved 110 + scc_ipg 111 + sdma_ipg 112 + sim1_ipg 113 + sim2_ipg 114 + slcdc_ipg 115 + spba_ipg 116 + ssi1_ipg 117 + ssi2_ipg 118 + tsc_ipg 119 + uart1_ipg 120 + uart2_ipg 121 + uart3_ipg 122 + uart4_ipg 123 + uart5_ipg 124 + reserved 125 + wdt_ipg 126 + cko_div 127 + cko_sel 128 + cko 129 + +properties: + compatible: + const: fsl,imx25-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 79>, <&clks 50>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt deleted file mode 100644 index 4c95c048d3b2..000000000000 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Clock bindings for Freescale i.MX27 - -Required properties: -- compatible: Should be "fsl,imx27-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h -for the full list of i.MX27 clock IDs. - -Examples: - clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, - <&clks IMX27_CLK_PER1_GATE>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml new file mode 100644 index 000000000000..b5f3ed084ea0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx27-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX27 + +maintainers: + - Fabio Estevam + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h + for the full list of i.MX27 clock IDs. + +properties: + compatible: + const: fsl,imx27-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + + clock-controller@10027000 { + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + serial@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt deleted file mode 100644 index d84a37d2885f..000000000000 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ /dev/null @@ -1,93 +0,0 @@ -* Clock bindings for Freescale i.MX28 - -Required properties: -- compatible: Should be "fsl,imx28-clkctrl" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX28 -clocks and IDs. - - Clock ID - ------------------ - ref_xtal 0 - pll0 1 - pll1 2 - pll2 3 - ref_cpu 4 - ref_emi 5 - ref_io0 6 - ref_io1 7 - ref_pix 8 - ref_hsadc 9 - ref_gpmi 10 - saif0_sel 11 - saif1_sel 12 - gpmi_sel 13 - ssp0_sel 14 - ssp1_sel 15 - ssp2_sel 16 - ssp3_sel 17 - emi_sel 18 - etm_sel 19 - lcdif_sel 20 - cpu 21 - ptp_sel 22 - cpu_pll 23 - cpu_xtal 24 - hbus 25 - xbus 26 - ssp0_div 27 - ssp1_div 28 - ssp2_div 29 - ssp3_div 30 - gpmi_div 31 - emi_pll 32 - emi_xtal 33 - lcdif_div 34 - etm_div 35 - ptp 36 - saif0_div 37 - saif1_div 38 - clk32k_div 39 - rtc 40 - lradc 41 - spdif_div 42 - clk32k 43 - pwm 44 - uart 45 - ssp0 46 - ssp1 47 - ssp2 48 - ssp3 49 - gpmi 50 - spdif 51 - emi 52 - saif0 53 - saif1 54 - lcdif 55 - etm 56 - fec 57 - can0 58 - can1 59 - usb0 60 - usb1 61 - usb0_phy 62 - usb1_phy 63 - enet_out 64 - -Examples: - -clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; -}; - -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; - clocks = <&clks 45>; -}; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml new file mode 100644 index 000000000000..72328d5ca09a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx28-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX28 + +maintainers: + - Shawn Guo + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX28 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_phy 62 + usb1_phy 63 + enet_out 64 + +properties: + compatible: + const: fsl,imx28-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + clocks = <&clks 45>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt deleted file mode 100644 index 0a291090e562..000000000000 --- a/Documentation/devicetree/bindings/clock/imx31-clock.txt +++ /dev/null @@ -1,90 +0,0 @@ -* Clock bindings for Freescale i.MX31 - -Required properties: -- compatible: Should be "fsl,imx31-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX31 -clocks and IDs. - - Clock ID - ----------------------- - dummy 0 - ckih 1 - ckil 2 - mpll 3 - spll 4 - upll 5 - mcu_main 6 - hsp 7 - ahb 8 - nfc 9 - ipg 10 - per_div 11 - per 12 - csi_sel 13 - fir_sel 14 - csi_div 15 - usb_div_pre 16 - usb_div_post 17 - fir_div_pre 18 - fir_div_post 19 - sdhc1_gate 20 - sdhc2_gate 21 - gpt_gate 22 - epit1_gate 23 - epit2_gate 24 - iim_gate 25 - ata_gate 26 - sdma_gate 27 - cspi3_gate 28 - rng_gate 29 - uart1_gate 30 - uart2_gate 31 - ssi1_gate 32 - i2c1_gate 33 - i2c2_gate 34 - i2c3_gate 35 - hantro_gate 36 - mstick1_gate 37 - mstick2_gate 38 - csi_gate 39 - rtc_gate 40 - wdog_gate 41 - pwm_gate 42 - sim_gate 43 - ect_gate 44 - usb_gate 45 - kpp_gate 46 - ipu_gate 47 - uart3_gate 48 - uart4_gate 49 - uart5_gate 50 - owire_gate 51 - ssi2_gate 52 - cspi1_gate 53 - cspi2_gate 54 - gacc_gate 55 - emi_gate 56 - rtic_gate 57 - firi_gate 58 - -Examples: - -clks: ccm@53f80000{ - compatible = "fsl,imx31-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>, <53>; - #clock-cells = <1>; -}; - -uart1: serial@43f90000 { - compatible = "fsl,imx31-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 10>, <&clks 30>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml new file mode 100644 index 000000000000..1b6f75d3928a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx31-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX31 + +maintainers: + - Fabio Estevam + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX31 + clocks and IDs. + + Clock ID + ----------------------- + dummy 0 + ckih 1 + ckil 2 + mpll 3 + spll 4 + upll 5 + mcu_main 6 + hsp 7 + ahb 8 + nfc 9 + ipg 10 + per_div 11 + per 12 + csi_sel 13 + fir_sel 14 + csi_div 15 + usb_div_pre 16 + usb_div_post 17 + fir_div_pre 18 + fir_div_post 19 + sdhc1_gate 20 + sdhc2_gate 21 + gpt_gate 22 + epit1_gate 23 + epit2_gate 24 + iim_gate 25 + ata_gate 26 + sdma_gate 27 + cspi3_gate 28 + rng_gate 29 + uart1_gate 30 + uart2_gate 31 + ssi1_gate 32 + i2c1_gate 33 + i2c2_gate 34 + i2c3_gate 35 + hantro_gate 36 + mstick1_gate 37 + mstick2_gate 38 + csi_gate 39 + rtc_gate 40 + wdog_gate 41 + pwm_gate 42 + sim_gate 43 + ect_gate 44 + usb_gate 45 + kpp_gate 46 + ipu_gate 47 + uart3_gate 48 + uart4_gate 49 + uart5_gate 50 + owire_gate 51 + ssi2_gate 52 + cspi1_gate 53 + cspi2_gate 54 + gacc_gate 55 + emi_gate 56 + rtic_gate 57 + firi_gate 58 + +properties: + compatible: + const: fsl,imx31-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for DVFS when a frequency change is requested, request 2 is + to generate interrupt for DPTC when a voltage change is requested. + items: + - description: CCM DVFS interrupt request 1 + - description: CCM DPTC interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; + + serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 10>, <&clks 30>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt deleted file mode 100644 index f49783213c56..000000000000 --- a/Documentation/devicetree/bindings/clock/imx35-clock.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Clock bindings for Freescale i.MX35 - -Required properties: -- compatible: Should be "fsl,imx35-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX35 -clocks and IDs. - - Clock ID - --------------------------- - ckih 0 - mpll 1 - ppll 2 - mpll_075 3 - arm 4 - hsp 5 - hsp_div 6 - hsp_sel 7 - ahb 8 - ipg 9 - arm_per_div 10 - ahb_per_div 11 - ipg_per 12 - uart_sel 13 - uart_div 14 - esdhc_sel 15 - esdhc1_div 16 - esdhc2_div 17 - esdhc3_div 18 - spdif_sel 19 - spdif_div_pre 20 - spdif_div_post 21 - ssi_sel 22 - ssi1_div_pre 23 - ssi1_div_post 24 - ssi2_div_pre 25 - ssi2_div_post 26 - usb_sel 27 - usb_div 28 - nfc_div 29 - asrc_gate 30 - pata_gate 31 - audmux_gate 32 - can1_gate 33 - can2_gate 34 - cspi1_gate 35 - cspi2_gate 36 - ect_gate 37 - edio_gate 38 - emi_gate 39 - epit1_gate 40 - epit2_gate 41 - esai_gate 42 - esdhc1_gate 43 - esdhc2_gate 44 - esdhc3_gate 45 - fec_gate 46 - gpio1_gate 47 - gpio2_gate 48 - gpio3_gate 49 - gpt_gate 50 - i2c1_gate 51 - i2c2_gate 52 - i2c3_gate 53 - iomuxc_gate 54 - ipu_gate 55 - kpp_gate 56 - mlb_gate 57 - mshc_gate 58 - owire_gate 59 - pwm_gate 60 - rngc_gate 61 - rtc_gate 62 - rtic_gate 63 - scc_gate 64 - sdma_gate 65 - spba_gate 66 - spdif_gate 67 - ssi1_gate 68 - ssi2_gate 69 - uart1_gate 70 - uart2_gate 71 - uart3_gate 72 - usbotg_gate 73 - wdog_gate 74 - max_gate 75 - admux_gate 76 - csi_gate 77 - csi_div 78 - csi_sel 79 - iim_gate 80 - gpu2d_gate 81 - ckli_gate 82 - -Examples: - -clks: ccm@53f80000 { - compatible = "fsl,imx35-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; - #clock-cells = <1>; -}; - -esdhc1: esdhc@53fb4000 { - compatible = "fsl,imx35-esdhc"; - reg = <0x53fb4000 0x4000>; - interrupts = <7>; - clocks = <&clks 9>, <&clks 8>, <&clks 43>; - clock-names = "ipg", "ahb", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml new file mode 100644 index 000000000000..bd871da6fc7c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx35-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX35 + +maintainers: + - Steffen Trumtrar + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX35 + clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + ckli_gate 82 + +properties: + compatible: + const: fsl,imx35-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt deleted file mode 100644 index a24ca9e582d2..000000000000 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Clock bindings for Freescale i.MX5 - -Required properties: -- compatible: Should be "fsl,-ccm" , where can be imx51 or imx53 -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h -for the full list of i.MX5 clock IDs. - -Examples (for mx53): - -clks: ccm@53fd4000{ - compatible = "fsl,imx53-ccm"; - reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; - #clock-cells = <1>; -}; - -can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; - reg = <0x53fc8000 0x4000>; - interrupts = <82>; - clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml new file mode 100644 index 000000000000..f5c2b3d7a910 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx5-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX5 + +maintainers: + - Fabio Estevam + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h + for the full list of i.MX5 clock IDs. + +properties: + compatible: + enum: + - fsl,imx53-ccm + - fsl,imx51-ccm + - fsl,imx50-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + #include + + clock-controller@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 72 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; + + can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt deleted file mode 100644 index 13d36d4c6991..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Clock bindings for Freescale i.MX6 Quad - -Required properties: -- compatible: Should be "fsl,imx6q-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -Optional properties: -- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal - on power off. - Use this property if the SoC should be powered off by external power - management IC (PMIC) triggered via PMIC_STBY_REQ signal. - Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should - be using "syscon-poweroff" driver instead. -- clocks: list of clock specifiers, must contain an entry for each entry - in clock-names -- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h -for the full list of i.MX6 Quad and DualLite clock IDs. - -Examples: - -#include - -clks: ccm@20c4000 { - compatible = "fsl,imx6q-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <0 87 0x04 0 88 0x04>; - #clock-cells = <1>; -}; - -uart1: serial@2020000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <0 26 0x04>; - clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml new file mode 100644 index 000000000000..429e3b62b965 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 Quad + +maintainers: + - Anson Huang + +properties: + compatible: + const: fsl,imx6q-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 24m osc + - description: 32k osc + - description: ckih1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: osc + - const: ckil + - const: ckih1 + - const: anaclk1 + - const: anaclk2 + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + #include + + clock-controller@20c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt deleted file mode 100644 index 15e40bdf147d..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt +++ /dev/null @@ -1,10 +0,0 @@ -* Clock bindings for Freescale i.MX6 SoloLite - -Required properties: -- compatible: Should be "fsl,imx6sl-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h -for the full list of i.MX6 SoloLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml new file mode 100644 index 000000000000..135568c46350 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloLite + +maintainers: + - Anson Huang + +properties: + compatible: + const: fsl,imx6sl-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + #include + + clock-controller@20c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt deleted file mode 100644 index fee849d5fdd1..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Clock bindings for Freescale i.MX6 SLL - -Required properties: -- compatible: Should be "fsl,imx6sll-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h -for the full list of i.MX6 SLL clock IDs. - -Examples: - -#include - -clks: clock-controller@20c4000 { - compatible = "fsl,imx6sll-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = , - ; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; -}; - -uart1: serial@2020000 { - compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = ; - clocks = <&clks IMX6SLL_CLK_UART1_IPG>, - <&clks IMX6SLL_CLK_UART1_SERIAL>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml new file mode 100644 index 000000000000..fa55f1ce3e57 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SLL + +maintainers: + - Anson Huang + +properties: + compatible: + const: fsl,imx6sll-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include + + clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt deleted file mode 100644 index 22362b9b7ba3..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX6 SoloX - -Required properties: -- compatible: Should be "fsl,imx6sx-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h -for the full list of i.MX6 SoloX clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml new file mode 100644 index 000000000000..982d698e8c54 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloX + +maintainers: + - Anson Huang + +properties: + compatible: + const: fsl,imx6sx-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + - const: anaclk1 + - const: anaclk2 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include + + clock-controller@20c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt deleted file mode 100644 index 571d5039f663..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX6 UltraLite - -Required properties: -- compatible: Should be "fsl,imx6ul-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h -for the full list of i.MX6 UltraLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml new file mode 100644 index 000000000000..3c779eea6394 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 UltraLite + +maintainers: + - Anson Huang + +properties: + compatible: + const: fsl,imx6ul-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include + + clock-controller@20c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/Documentation/devicetree/bindings/clock/imx7d-clock.txt deleted file mode 100644 index 9d3026d81a68..000000000000 --- a/Documentation/devicetree/bindings/clock/imx7d-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX7 Dual - -Required properties: -- compatible: Should be "fsl,imx7d-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h -for the full list of i.MX7 Dual clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml new file mode 100644 index 000000000000..cefb61db01a8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX7 Dual + +maintainers: + - Frank Li + - Anson Huang + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h + for the full list of i.MX7 Dual clock IDs. + +properties: + compatible: + const: fsl,imx7d-ccm + + reg: + maxItems: 1 + + interrupts: + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + + clock-names: + items: + - const: ckil + - const: osc + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + + clock-controller@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt deleted file mode 100644 index 965cfa42e025..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt +++ /dev/null @@ -1,51 +0,0 @@ -* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings - -The Low-Power Clock Gate (LPCG) modules contain a local programming -model to control the clock gates for the peripherals. An LPCG module -is used to locally gate the clocks for the associated peripheral. - -Note: -This level of clock gating is provided after the clocks are generated -by the SCU resources and clock controls. Thus even if the clock is -enabled by these control bits, it might still not be running based -on the base resource. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qxp-lpcg-adma", - "fsl,imx8qxp-lpcg-conn", - "fsl,imx8qxp-lpcg-dc", - "fsl,imx8qxp-lpcg-dsp", - "fsl,imx8qxp-lpcg-gpu", - "fsl,imx8qxp-lpcg-hsio", - "fsl,imx8qxp-lpcg-img", - "fsl,imx8qxp-lpcg-lsio", - "fsl,imx8qxp-lpcg-vpu" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - -Examples: - -#include - -conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; -}; - -usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; - interrupts = ; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml new file mode 100644 index 000000000000..33f3010f48c3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +maintainers: + - Aisheng Dong + +description: | + The Low-Power Clock Gate (LPCG) modules contain a local programming + model to control the clock gates for the peripherals. An LPCG module + is used to locally gate the clocks for the associated peripheral. + + This level of clock gating is provided after the clocks are generated + by the SCU resources and clock controls. Thus even if the clock is + enabled by these control bits, it might still not be running based + on the base resource. + + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from: + include/dt-bindings/clock/imx8-clock.h + +properties: + compatible: + enum: + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + #include + #include + + clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupts = ; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt deleted file mode 100644 index 75598e655067..000000000000 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt +++ /dev/null @@ -1,57 +0,0 @@ -Ingenic SoC CGU binding - -The CGU in an Ingenic SoC provides all the clocks generated on-chip. It -typically includes a variety of PLLs, multiplexers, dividers & gates in order -to provide many different clock signals derived from only 2 external source -clocks. - -Required properties: -- compatible : Should be one of: - * ingenic,jz4740-cgu - * ingenic,jz4725b-cgu - * ingenic,jz4770-cgu - * ingenic,jz4780-cgu - * ingenic,x1000-cgu -- reg : The address & length of the CGU registers. -- clocks : List of phandle & clock specifiers for clocks external to the CGU. - Two such external clocks should be specified - first the external crystal - "ext" and second the RTC clock source "rtc". -- clock-names : List of name strings for the external clocks. -- #clock-cells: Should be 1. - Clock consumers specify this argument to identify a clock. The valid values - may be found in -cgu.h>. - -Example SoC include file: - -/ { - cgu: jz4740-cgu { - compatible = "ingenic,jz4740-cgu"; - reg = <0x10000000 0x100>; - #clock-cells = <1>; - }; - - uart0: serial@10030000 { - clocks = <&cgu JZ4740_CLK_UART0>; - }; -}; - -Example board file: - -/ { - ext: clock@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - rtc: clock@1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - &cgu { - clocks = <&ext> <&rtc>; - clock-names: "ext", "rtc"; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml new file mode 100644 index 000000000000..a952d5811823 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs CGU devicetree bindings + +description: | + The CGU in an Ingenic SoC provides all the clocks generated on-chip. It + typically includes a variety of PLLs, multiplexers, dividers & gates in order + to provide many different clock signals derived from only 2 external source + clocks. + +maintainers: + - Paul Cercueil + +select: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + required: + - compatible + +properties: + $nodename: + pattern: "^clock-controller@[0-9a-f]+$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#clock-cells": + const: 1 + + ranges: true + + compatible: + items: + - enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + - const: simple-mfd + minItems: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: External oscillator clock + - description: Internal 32 kHz RTC clock + + clock-names: + items: + - const: ext + - enum: + - rtc + - osc32k # Different name, same clock + + assigned-clocks: + minItems: 1 + maxItems: 64 + + assigned-clock-parents: + minItems: 1 + maxItems: 64 + + assigned-clock-rates: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + +patternProperties: + "^usb-phy@[a-f0-9]+$": + allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ] + +additionalProperties: false + +examples: + - | + #include + cgu: clock-controller@10000000 { + compatible = "ingenic,jz4770-cgu", "simple-mfd"; + reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + clocks = <&ext>, <&osc32k>; + clock-names = "ext", "osc32k"; + + #clock-cells = <1>; + + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + vcc-supply = <&ldo5>; + + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index a345320e0e49..a404c8fbee67 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -65,7 +65,7 @@ examples: #include clock-controller@100000 { compatible = "qcom,gcc-sc7180"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 36f3b3668ced..12766a866625 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -63,7 +63,7 @@ examples: #include clock-controller@100000 { compatible = "qcom,gcc-sm8150"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index 2c40a8aa9815..a5766ff89082 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -61,7 +61,7 @@ examples: #include clock-controller@100000 { compatible = "qcom,gcc-sm8250"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index f684fe67db84..acc31b3991bd 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -15,15 +15,15 @@ description: | power domains. properties: - compatible : + compatible: enum: - - qcom,mmcc-apq8064 - - qcom,mmcc-apq8084 - - qcom,mmcc-msm8660 - - qcom,mmcc-msm8960 - - qcom,mmcc-msm8974 - - qcom,mmcc-msm8996 - - qcom,mmcc-msm8998 + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 58cdfd5924d3..e94847f92770 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -66,7 +66,7 @@ examples: #include clock-controller@af00000 { compatible = "qcom,sc7180-dispcc"; - reg = <0 0x0af00000 0 0x200000>; + reg = <0x0af00000 0x200000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml index 8635e35fd3f0..fe08461fce05 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml @@ -60,7 +60,7 @@ examples: #include clock-controller@5090000 { compatible = "qcom,sc7180-gpucc"; - reg = <0 0x05090000 0 0x9000>; + reg = <0x05090000 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml index 0dd5d25ae7d7..970030986a86 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml @@ -50,7 +50,7 @@ examples: #include clock-controller@41a8000 { compatible = "qcom,sc7180-mss"; - reg = <0 0x041a8000 0 0x8000>; + reg = <0x041a8000 0x8000>; clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, <&gcc GCC_MSS_NAV_AXI_CLK>, <&gcc GCC_MSS_CFG_AHB_CLK>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml index 0071b9701960..2feea2b91aa9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml @@ -55,7 +55,7 @@ examples: #include clock-controller@ab00000 { compatible = "qcom,sc7180-videocc"; - reg = <0 0x0ab00000 0 0x10000>; + reg = <0x0ab00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index ad47d747a3e4..4a3be733d042 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -75,7 +75,7 @@ examples: #include clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; - reg = <0 0x0af00000 0 0x10000>; + reg = <0x0af00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml index 7a052ac5dc00..8a0c576ba8b3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml @@ -60,7 +60,7 @@ examples: #include clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; - reg = <0 0x05090000 0 0x9000>; + reg = <0x05090000 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml index 2a6a81ab0318..f7a0cf53d5f0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml @@ -55,7 +55,7 @@ examples: #include clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; - reg = <0 0x0ab00000 0 0x10000>; + reg = <0x0ab00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index bb3a78d8105e..14ae4ea3bc20 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -76,29 +76,24 @@ examples: - | ap_clk: clock-controller@21500000 { compatible = "sprd,sc9863a-ap-clk"; - reg = <0 0x21500000 0 0x1000>; + reg = <0x21500000 0x1000>; clocks = <&ext_26m>, <&ext_32k>; clock-names = "ext-26m", "ext-32k"; #clock-cells = <1>; }; - | - soc { - #address-cells = <2>; - #size-cells = <2>; + syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0x20e00000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20e00000 0x4000>; - ap_ahb_regs: syscon@20e00000 { - compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; - reg = <0 0x20e00000 0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x20e00000 0x4000>; - - apahb_gate: apahb-gate@0 { - compatible = "sprd,sc9863a-apahb-gate"; - reg = <0x0 0x1020>; - #clock-cells = <1>; - }; + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 4638d7adb806..9bd52e63c935 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -15,10 +15,15 @@ description: properties: compatible: - enum: - - usb-a-connector - - usb-b-connector - - usb-c-connector + oneOf: + - enum: + - usb-a-connector + - usb-b-connector + - usb-c-connector + + - items: + - const: gpio-usb-b-connector + - const: usb-b-connector label: description: Symbolic name for the connector. @@ -27,8 +32,8 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - mini - micro @@ -57,8 +62,8 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - source - sink @@ -66,18 +71,18 @@ properties: try-power-role: description: Preferred power role. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - - source - - sink - - dual + - source + - sink + - dual data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - host - device @@ -95,8 +100,7 @@ properties: defined in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array sink-pdos: description: An array of u32 with each entry providing supported power sink @@ -108,8 +112,7 @@ properties: in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array op-sink-microwatt: description: Sink required operating power in microwatt, if source can't @@ -142,9 +145,22 @@ properties: required: - compatible +allOf: + - if: + properties: + compatible: + contains: + const: gpio-usb-b-connector + then: + anyOf: + - required: + - vbus-gpios + - required: + - id-gpios + examples: # Micro-USB connector with HS lines routed via controller (MUIC). - - |+ + - | muic-max77843 { usb_con1: connector { compatible = "usb-b-connector"; @@ -156,7 +172,7 @@ examples: # USB-C connector attached to CC controller (s2mm005), HS lines routed # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. - - |+ + - | ccic: s2mm005 { usb_con2: connector { compatible = "usb-c-connector"; @@ -190,7 +206,7 @@ examples: # USB-C connector attached to a typec port controller(ptn5110), which has # power delivery support and enables drp. - - |+ + - | #include typec: ptn5110 { usb_con3: connector { @@ -204,3 +220,16 @@ examples: op-sink-microwatt = <10000000>; }; }; + + # USB connector with GPIO control lines + - | + #include + + usb { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_p0_vbus>; + }; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt new file mode 100644 index 000000000000..daeca6ae6b76 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -0,0 +1,56 @@ +Binding for NVIDIA Tegra20 CPUFreq +================================== + +Required properties: +- clocks: Must contain an entry for the CPU clock. + See ../clocks/clock-bindings.txt for details. +- operating-points-v2: See ../bindings/opp/opp.txt for details. +- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details. + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + On Tegra20: + 1. CPU process ID mask + 2. SoC speedo ID mask + + On Tegra30: + 1. CPU process ID mask + 2. CPU speedo ID mask + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +- opp-microvolt: CPU voltage triplet. + +Optional properties: +- cpu-supply: Phandle to the CPU power supply. + +Example: + regulators { + cpu_reg: regulator0 { + regulator-name = "vdd_cpu"; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@456000000 { + clock-latency-ns = <125000>; + opp-microvolt = <825000 825000 1125000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + ... + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&cpu_reg>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 8b9a8f337f16..fc823572bcff 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -15,16 +15,16 @@ properties: oneOf: - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun5i-a13-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun6i-a31-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun7i-a20-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun8i-a33-crypto + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 2c459b8c76ff..7a60d84289cc 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -50,16 +50,16 @@ if: const: allwinner,sun50i-h6-crypto then: properties: - clocks: - minItems: 3 - clock-names: - minItems: 3 + clocks: + minItems: 3 + clock-names: + minItems: 3 else: properties: - clocks: - maxItems: 2 - clock-names: - maxItems: 2 + clocks: + maxItems: 2 + clock-names: + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml index 5becc60a0e28..ecf98a9e72b2 100644 --- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml @@ -12,7 +12,7 @@ maintainers: properties: compatible: items: - - const: amlogic,gxl-crypto + - const: amlogic,gxl-crypto reg: maxItems: 1 @@ -45,7 +45,7 @@ examples: crypto: crypto-engine@c883e000 { compatible = "amlogic,gxl-crypto"; - reg = <0x0 0xc883e000 0x0 0x36>; + reg = <0xc883e000 0x36>; interrupts = , ; clocks = <&clkc CLKID_BLKMV>; clock-names = "blkmv"; diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index 57ae1c0b6d18..6dd658f0912c 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -36,11 +36,10 @@ properties: dma-maxburst: description: Set number of maximum dma burst supported - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 2 - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index 944ff2f1cf93..e77523b02fad 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -66,10 +66,9 @@ properties: - allwinner,sun50i-h6-display-engine allwinner,pipelines: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available. diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml index 5d4915aed1e2..75e6479397a5 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -21,8 +21,8 @@ properties: - const: allwinner,sun5i-a10s-hdmi - const: allwinner,sun6i-a31-hdmi - items: - - const: allwinner,sun7i-a20-hdmi - - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi reg: maxItems: 1 @@ -33,32 +33,32 @@ properties: clocks: oneOf: - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The HDMI DDC clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL clock-names: oneOf: - items: - - const: ahb - - const: mod - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 - items: - - const: ahb - - const: mod - - const: ddc - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index e5344c4ae226..4c15a2644a7c 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -35,26 +35,26 @@ properties: - const: allwinner,sun9i-a80-tcon-tv - items: - - enum: - - allwinner,sun7i-a20-tcon0 - - allwinner,sun7i-a20-tcon1 - - const: allwinner,sun7i-a20-tcon + - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon - items: - - enum: - - allwinner,sun50i-a64-tcon-lcd - - const: allwinner,sun8i-a83t-tcon-lcd + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd - items: - - enum: - - allwinner,sun8i-h3-tcon-tv - - allwinner,sun50i-a64-tcon-tv - - const: allwinner,sun8i-a83t-tcon-tv + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv - items: - - enum: - - allwinner,sun50i-h6-tcon-tv - - const: allwinner,sun8i-r40-tcon-tv + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv reg: maxItems: 1 @@ -71,11 +71,10 @@ properties: maxItems: 4 clock-output-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - maxItems: 1 description: Name of the LCD pixel clock created. + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 dmas: maxItems: 1 @@ -83,37 +82,37 @@ properties: resets: anyOf: - items: - - description: TCON Reset Line + - description: TCON Reset Line - items: - - description: TCON Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON LVDS Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line reset-names: oneOf: - const: lcd - items: - - const: lcd - - const: lvds + - const: lcd + - const: lvds - items: - - const: lcd - - const: edp + - const: lcd + - const: edp - items: - - const: lcd - - const: edp - - const: lvds + - const: lcd + - const: edp + - const: lvds ports: type: object diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index e73662c8d339..63f948175239 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -76,28 +76,28 @@ required: allOf: - if: properties: - compatible: - contains: - const: allwinner,sun6i-a31-mipi-dsi + compatible: + contains: + const: allwinner,sun6i-a31-mipi-dsi then: - properties: - clocks: - minItems: 2 + properties: + clocks: + minItems: 2 - required: - - clock-names + required: + - clock-names - if: properties: - compatible: - contains: - const: allwinner,sun50i-a64-mipi-dsi + compatible: + contains: + const: allwinner,sun50i-a64-mipi-dsi then: - properties: - clocks: - minItems: 1 + properties: + clocks: + minItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 4d6795690ac3..fa4769a0b26e 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -29,11 +29,11 @@ properties: - const: allwinner,sun50i-h6-dw-hdmi - items: - - enum: - - allwinner,sun8i-h3-dw-hdmi - - allwinner,sun8i-r40-dw-hdmi - - allwinner,sun50i-a64-dw-hdmi - - const: allwinner,sun8i-a83t-dw-hdmi + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000000..3ba477aefdd7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Enric Balletbo i Serra + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + deprecated: true + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + description: Regulator for 1.0V digital core power. + + ports: + type: object + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + properties: + port@0: + type: object + description: Video port for HDMI input. + + properties: + reg: + const: 0 + + port@1: + type: object + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + properties: + reg: + const: 1 + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt deleted file mode 100644 index 17258747fff6..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt +++ /dev/null @@ -1,42 +0,0 @@ -Analogix ANX7814 SlimPort (Full-HD Transmitter) ------------------------------------------------ - -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter -designed for portable devices. - -Required properties: - - - compatible : Must be one of: - "analogix,anx7808" - "analogix,anx7812" - "analogix,anx7814" - "analogix,anx7818" - - reg : I2C address of the device - - interrupts : Should contain the INTP interrupt - - hpd-gpios : Which GPIO to use for hpd - - pd-gpios : Which GPIO to use for power down - - reset-gpios : Which GPIO to use for reset - -Optional properties: - - - dvdd10-supply : Regulator for 1.0V digital core power. - - Video port for HDMI input, using the DT bindings defined in [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - anx7814: anx7814@38 { - compatible = "analogix,anx7814"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; - port { - anx7814_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 800c63764e71..68951d56ebba 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -32,17 +32,17 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter - - const: lvds-encoder # Generic LVDS encoder compatible fallback + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - - enum: - - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver - - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: type: object diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index a747b755ad06..45fe8fe5faba 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 90, 180, 270 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270] # Display Timings panel-timing: @@ -58,16 +57,14 @@ properties: Most display panels are restricted to a single resolution and require specific display timings. The panel-timing subnode expresses those timings. - allOf: - - $ref: panel-timing.yaml# + $ref: panel-timing.yaml# display-timings: description: Some display panels support several resolutions with different timings. The display-timings bindings supports specifying several timings and optionally specifying which is the native mode. - allOf: - - $ref: display-timings.yaml# + $ref: display-timings.yaml# # Connectivity port: diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index bd558ad7891f..182c19cb7fdd 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -72,92 +72,80 @@ properties: hfront-porch: description: Horizontal front porch panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels hback-porch: description: Horizontal back porch timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels hsync-len: description: Horizontal sync length panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels vfront-porch: description: Vertical front porch panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines vback-porch: description: Vertical back porch panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines vsync-len: description: Vertical sync length panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines hsync-active: description: | diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index 185dcc8fd1f9..78d060097052 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -18,7 +18,7 @@ properties: reg: true reset-gpios: true vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage enforce-video-mode: true required: diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index 6913923df569..d5c46a3cc2b0 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml index a57037b9e9ba..561efaaa5a91 100644 --- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml +++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml @@ -21,15 +21,15 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,r8a7795-cmm - - renesas,r8a7796-cmm - - renesas,r8a77965-cmm - - renesas,r8a77990-cmm - - renesas,r8a77995-cmm - - const: renesas,rcar-gen3-cmm + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm - items: - - const: renesas,rcar-gen2-cmm + - const: renesas,rcar-gen2-cmm reg: maxItems: 1 @@ -60,7 +60,7 @@ examples: cmm0: cmm@fea40000 { compatible = "renesas,r8a7796-cmm", "renesas,rcar-gen3-cmm"; - reg = <0 0xfea40000 0 0x1000>; + reg = <0xfea40000 0x1000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; clocks = <&cpg CPG_MOD 711>; resets = <&cpg 711>; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 9999255ac5b6..47319214b5f6 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -40,14 +40,30 @@ of the following host1x client modules: Required properties: - compatible: "nvidia,tegra-vi" - - reg: Physical base address and length of the controller's registers. + - reg: Physical base address and length of the controller registers. - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. + - clocks: clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - vi + - Tegra20/Tegra30/Tegra114/Tegra124: + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi + - Tegra210: + - power-domains: Must include venc powergate node as vi is in VE partition. + - Tegra210 has CSI part of VI sharing same host interface and register space. + So, VI device node should have CSI child node. + + - csi: mipi csi interface to vi + + Required properties: + - compatible: "nvidia,tegra210-csi" + - reg: Physical base address offset to parent and length of the controller + registers. + - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks. + See ../clocks/clock-bindings.txt for details. + - power-domains: Must include sor powergate node as csicil is in + SOR partition. - epp: encoder pre-processor @@ -309,13 +325,44 @@ Example: reset-names = "mpe"; }; - vi { - compatible = "nvidia,tegra20-vi"; - reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car TEGRA20_CLK_VI>; - resets = <&tegra_car 100>; - reset-names = "vi"; + vi@54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x0 0x54080000 0x0 0x700>; + interrupts = ; + assigned-clocks = <&tegra_car TEGRA210_CLK_VI>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + + clocks = <&tegra_car TEGRA210_CLK_VI>; + power-domains = <&pd_venc>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x0 0x54080000 0x2000>; + + csi@838 { + compatible = "nvidia,tegra210-csi"; + reg = <0x838 0x1300>; + assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>; + assigned-clock-rates = <102000000>, + <102000000>, + <102000000>, + <972000000>; + + clocks = <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; + power-domains = <&pd_sor>; + }; }; epp { diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index eb04c2330698..4f9185462ed3 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -88,9 +88,8 @@ properties: - "#size-cells" ti,am65x-oldi-io-ctrl: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - maxItems: 1 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + maxItems: 1 description: phandle to syscon device node mapping OLDI IO_CTRL registers. The mapped range should point to OLDI_DAT0_IO_CTRL, map it and @@ -123,13 +122,13 @@ examples: dss: dss@4a00000 { compatible = "ti,am65x-dss"; - reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ - <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ - <0x0 0x04a06000 0x0 0x1000>, /* vid */ - <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ - <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ - <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ - <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + reg = <0x04a00000 0x1000>, /* common */ + <0x04a02000 0x1000>, /* vidl1 */ + <0x04a06000 0x1000>, /* vid */ + <0x04a07000 0x1000>, /* ovr1 */ + <0x04a08000 0x1000>, /* ovr2 */ + <0x04a0a000 0x1000>, /* vp1 */ + <0x04a0b000 0x1000>; /* vp2 */ reg-names = "common", "vidl1", "vid", "ovr1", "ovr2", "vp1", "vp2"; ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml index eb4b1a266210..bbd76591c180 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -156,23 +156,23 @@ examples: dss: dss@4a00000 { compatible = "ti,j721e-dss"; - reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */ - <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/ - <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/ - <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/ - <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */ - <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */ - <0x00 0x04a50000 0x00 0x10000>, /* vid1 */ - <0x00 0x04a60000 0x00 0x10000>, /* vid2 */ - <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */ - <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */ - <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */ - <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */ - <0x00 0x04a80000 0x00 0x10000>, /* vp1 */ - <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */ - <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */ - <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */ - <0x00 0x04af0000 0x00 0x10000>; /* wb */ + reg = <0x04a00000 0x10000>, /* common_m */ + <0x04a10000 0x10000>, /* common_s0*/ + <0x04b00000 0x10000>, /* common_s1*/ + <0x04b10000 0x10000>, /* common_s2*/ + <0x04a20000 0x10000>, /* vidl1 */ + <0x04a30000 0x10000>, /* vidl2 */ + <0x04a50000 0x10000>, /* vid1 */ + <0x04a60000 0x10000>, /* vid2 */ + <0x04a70000 0x10000>, /* ovr1 */ + <0x04a90000 0x10000>, /* ovr2 */ + <0x04ab0000 0x10000>, /* ovr3 */ + <0x04ad0000 0x10000>, /* ovr4 */ + <0x04a80000 0x10000>, /* vp1 */ + <0x04aa0000 0x10000>, /* vp2 */ + <0x04ac0000 0x10000>, /* vp3 */ + <0x04ae0000 0x10000>, /* vp4 */ + <0x04af0000 0x10000>; /* wb */ reg-names = "common_m", "common_s0", "common_s1", "common_s2", "vidl1", "vidl2","vid1","vid2", diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index 02a34ba2b49b..c36592683340 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -31,8 +31,7 @@ properties: kernel. i.e. first channel corresponds to LSB. The first item in the array is for channels 0-31, the second is for channels 32-63, etc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 1 # Should be enough diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml new file mode 100644 index 000000000000..92794c500589 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs DMA Controller DT bindings + +maintainers: + - Paul Cercueil + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + enum: + - ingenic,jz4740-dma + - ingenic,jz4725b-dma + - ingenic,jz4770-dma + - ingenic,jz4780-dma + - ingenic,x1000-dma + - ingenic,x1830-dma + + reg: + items: + - description: Channel-specific registers + - description: System control registers + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + "#dma-cells": + const: 2 + description: > + DMA clients must use the format described in dma.txt, giving a phandle + to the DMA controller plus the following 2 integer cells: + + - Request type: The DMA request type for transfers to/from the + device on the allocated channel, as defined in the SoC documentation. + + - Channel: If set to 0xffffffff, any available channel will be allocated + for the client. Otherwise, the exact channel specified will be used. + The channel should be reserved on the DMA controller using the + ingenic,reserved-channels property. + + ingenic,reserved-channels: + $ref: /schemas/types.yaml#definitions/uint32 + description: > + Bitmask of channels to reserve for devices that need a specific + channel. These channels will only be assigned when explicitely + requested by a client. The primary use for this is channels 0 and + 1, which can be configured to have special behaviour for NAND/BCH + when using programmable firmware. + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + #include + dma: dma-controller@13420000 { + compatible = "ingenic,jz4780-dma"; + reg = <0x13420000 0x400>, <0x13421000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <10>; + + clocks = <&cgu JZ4780_CLK_PDMA>; + + #dma-cells = <2>; + + ingenic,reserved-channels = <0x3>; + }; diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt deleted file mode 100644 index 3459e77be294..000000000000 --- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Ingenic XBurst DMA Controller - -Required properties: - -- compatible: Should be one of: - * ingenic,jz4740-dma - * ingenic,jz4725b-dma - * ingenic,jz4770-dma - * ingenic,jz4780-dma - * ingenic,x1000-dma - * ingenic,x1830-dma -- reg: Should contain the DMA channel registers location and length, followed - by the DMA controller registers location and length. -- interrupts: Should contain the interrupt specifier of the DMA controller. -- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA - clock. -- #dma-cells: Must be <2>. Number of integer cells in the dmas property of - DMA clients (see below). - -Optional properties: - -- ingenic,reserved-channels: Bitmask of channels to reserve for devices that - need a specific channel. These channels will only be assigned when explicitly - requested by a client. The primary use for this is channels 0 and 1, which - can be configured to have special behaviour for NAND/BCH when using - programmable firmware. - -Example: - -dma: dma-controller@13420000 { - compatible = "ingenic,jz4780-dma"; - reg = <0x13420000 0x400 - 0x13421000 0x40>; - - interrupt-parent = <&intc>; - interrupts = <10>; - - clocks = <&cgu JZ4780_CLK_PDMA>; - - #dma-cells = <2>; - - ingenic,reserved-channels = <0x3>; -}; - -DMA clients must use the format described in dma.txt, giving a phandle to the -DMA controller plus the following 2 integer cells: - -1. Request type: The DMA request type for transfers to/from the device on - the allocated channel, as defined in the SoC documentation. - -2. Channel: If set to 0xffffffff, any available channel will be allocated for - the client. Otherwise, the exact channel specified will be used. The channel - should be reserved on the DMA controller using the ingenic,reserved-channels - property. - -Example: - -uart0: serial@10030000 { - ... - dmas = <&dma 0x14 0xffffffff - &dma 0x15 0xffffffff>; - dma-names = "tx", "rx"; - ... -}; diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt index 5d6f98c43e3d..2117db0ce4f2 100644 --- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt +++ b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt @@ -21,7 +21,8 @@ Required properties: Examples: apdma: dma-controller@11000400 { - compatible = "mediatek,mt2712-uart-dma"; + compatible = "mediatek,mt2712-uart-dma", + "mediatek,mt6577-uart-dma"; reg = <0 0x11000400 0 0x80>, <0 0x11000480 0 0x80>, <0 0x11000500 0 0x80>, diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index e7f2ad7dab5e..d32a71b975fe 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -49,7 +49,7 @@ examples: - | dma@3000000 { compatible = "sifive,fu540-c000-pdma"; - reg = <0x0 0x3000000 0x0 0x8000>; + reg = <0x3000000 0x8000>; interrupts = <23 24 25 26 27 28 29 30>; #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 39ea05e6e5ff..dd70ddab4fd1 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -69,34 +69,30 @@ properties: maxItems: 3 reg-names: - items: - - const: gcfg - - const: rchanrt - - const: tchanrt + items: + - const: gcfg + - const: rchanrt + - const: tchanrt msi-parent: true ti,sci: description: phandle to TI-SCI compatible System controller node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-dev-id: description: TI-SCI device id of UDMAP - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 ti,ringacc: description: phandle to the ring accelerator node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-rm-range-tchan: description: | Array of UDMA tchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -105,8 +101,7 @@ properties: description: | Array of UDMA rchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -115,8 +110,7 @@ properties: description: | Array of UDMA rflow resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -142,8 +136,7 @@ then: properties: ti,udma-atype: description: ATYPE value which should be used by non slave channels - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 required: - ti,udma-atype diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index a15787e504f0..4cee72d53318 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -34,7 +34,7 @@ properties: - minItems: 1 maxItems: 2 items: - - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|mac)[0-9]+|spd)$" + - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$" - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" - oneOf: - items: @@ -118,14 +118,13 @@ properties: maxItems: 1 pagesize: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The length of the pagesize for writing. Please consult the manual of your device, that value varies a lot. A wrong value may result in data loss! If not specified, a safety value of '1' is used which will be very slow. - enum: [ 1, 8, 16, 32, 64, 128, 258 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 8, 16, 32, 64, 128, 256] default: 1 read-only: @@ -148,18 +147,16 @@ properties: wp-gpios: true address-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of address bits. + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 enum: [ 8, 16 ] num-addresses: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Total number of i2c slave addresses this device takes. + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 minimum: 1 maximum: 8 diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 62811a1b5058..c9534d2164a2 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -138,12 +138,8 @@ properties: # 'description'. vendor,int-property: description: Vendor specific properties must have a description - # 'allOf' is the json-schema way of subclassing a schema. Here the base - # type schema is referenced and then additional constraints on the values - # are added. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 4, 6, 8, 10] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10] vendor,bool-property: description: Vendor specific properties must have a description. Boolean @@ -154,11 +150,10 @@ properties: vendor,string-array-property: description: Vendor specific properties should reference a type in the core schema. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - - enum: [ foo, bar ] - - enum: [ baz, boo ] + $ref: /schemas/types.yaml#/definitions/string-array + items: + - enum: [foo, bar] + - enum: [baz, boo] vendor,property-in-standard-units-microvolt: description: Vendor specific properties having a standard unit suffix diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt deleted file mode 100644 index 208daaff0be4..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ /dev/null @@ -1,76 +0,0 @@ -Cirrus Logic Arizona class audio SoCs - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -This document lists Extcon specific bindings, see the primary binding document: - ../mfd/arizona.txt - -Optional properties: - - - wlf,hpdet-channel : Headphone detection channel. - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR - If this node is not mentioned or if the value is unknown, then - headphone detection mode is set to HPDETL. - - - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack - detection. - - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for - jack detection. - - wlf,jd-invert : Invert the polarity of the jack detection switch - - - wlf,micd-software-compare : Use a software comparison to determine mic - presence - - wlf,micd-detect-debounce : Additional software microphone detection - debounce specified in milliseconds. - - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset - polarity if one exists. - - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to - performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX - defines. - - wlf,micd-rate : Delay between successive microphone detection measurements, - specified as per the ARIZONA_MICD_TIME_XXX defines. - - wlf,micd-dbtime : Microphone detection hardware debounces specified as the - number of measurements to take, valid values being 2 and 4. - - wlf,micd-timeout-ms : Timeout for microphone detection, specified in - milliseconds. - - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone - detection. - - wlf,micd-configs : Headset polarity configurations (generally used for - detection of CTIA / OMTP headsets), the field can be of variable length - but should always be a multiple of 3 cells long, each three cell group - represents one polarity configuration. - The first cell defines the accessory detection pin, zero will use MICDET1 - and all other values will use MICDET2. - The second cell represents the MICBIAS to be used. - The third cell represents the value of the micd-pol-gpio pin. - - - wlf,gpsw : Settings for the general purpose switch, set as one of the - ARIZONA_GPSW_XXX defines. - -Example: - -codec: wm8280@0 { - compatible = "wlf,wm8280"; - reg = <0>; - ... - - wlf,use-jd2; - wlf,use-jd2-nopull; - wlf,jd-invert; - - wlf,micd-software-compare; - wlf,micd-detect-debounce = <0>; - wlf,micd-pol-gpio = <&codec 2 0>; - wlf,micd-rate = ; - wlf,micd-dbtime = <4>; - wlf,micd-timeout-ms = <100>; - wlf,micd-force-micbias; - wlf,micd-configs = < - 0 1 0 /* MICDET1 MICBIAS1 GPIO=low */ - 1 2 1 /* MICDET2 MICBIAS2 GPIO=high */ - >; - - wlf,gpsw = ; -}; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml index 9c5849b341ea..20e1ccfc8630 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -22,8 +22,7 @@ properties: const: google,extcon-usbc-cros-ec google,usb-port-id: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: the port id minimum: 0 maximum: 255 diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml new file mode 100644 index 000000000000..f9845dc2f5ae --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + + This document lists Extcon specific bindings, see the primary binding + document ../mfd/arizona.yaml + +properties: + wlf,hpdet-channel: + description: + Headphone detection channel. ARIZONA_ACCDET_MODE_HPL/1 sets the + headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it + to HPDETR. If this node is not included or if the value is unknown, + then headphone detection mode is set to HPDETL. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 2 + + wlf,use-jd2: + description: + Use the additional JD input along with JD1 for dual pin jack detection. + type: boolean + + wlf,use-jd2-nopull: + description: + Internal pull on JD2 is disabled when used for jack detection. + type: boolean + + wlf,jd-invert: + description: + Invert the polarity of the jack detection switch. + type: boolean + + wlf,micd-software-compare: + description: + Use a software comparison to determine mic presence. + type: boolean + + wlf,micd-detect-debounce: + description: + Additional software microphone detection debounce specified in + milliseconds. + $ref: "/schemas/types.yaml#/definitions/uint32" + + wlf,micd-pol-gpio: + description: + GPIO specifier for the GPIO controlling the headset polarity if one + exists. + maxItems: 1 + + wlf,micd-bias-start-time: + description: + Time allowed for MICBIAS to startup prior to performing microphone + detection, specified as per the ARIZONA_MICD_TIME_XXX defines. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 12 + + wlf,micd-rate: + description: + Delay between successive microphone detection measurements, specified + as per the ARIZONA_MICD_TIME_XXX defines. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 12 + + wlf,micd-dbtime: + description: + Microphone detection hardware debounces specified as the number of + measurements to take. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [2, 4] + + wlf,micd-timeout-ms: + description: + Timeout for microphone detection, specified in milliseconds. + $ref: "/schemas/types.yaml#/definitions/uint32" + + wlf,micd-force-micbias: + description: + Force MICBIAS continuously on during microphone detection. + type: boolean + + wlf,micd-configs: + description: + Headset polarity configurations (generally used for detection of + CTIA / OMTP headsets), the field can be of variable length but + should always be a multiple of 3 cells long, each three cell group + represents one polarity configuration. + $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + items: + items: + - description: + The first cell defines the accessory detection pin, zero + will use MICDET1 and 0x2000 will use MICDET2. + enum: [ 0, 0x2000 ] + - description: + The second cell represents the MICBIAS to be used. Zero + will use MICVDD, 1-3 will use MICBIASx. + minimum: 0 + maximum: 3 + - description: + The third cell represents the value of the micd-pol-gpio + pin. + minimum: 0 + maximum: 1 + + wlf,gpsw: + description: + Settings for the general purpose switch, set as one of the + ARIZONA_GPSW_XXX defines. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3 diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index 5f1ed20e43ee..4f2cbd8307a7 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -27,7 +27,7 @@ properties: gpio-controller: true '#gpio-cells': - const: 2 + const: 2 ngpios: minimum: 0 diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt deleted file mode 100644 index b4cd9f906c24..000000000000 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Freescale i.MX/MXC GPIO controller - -Required properties: -- compatible : Should be "fsl,-gpio" -- reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all 32 pins, if - one number. If two numbers, the first one is the interrupt shared - by low 16 pins and the second one is for high 16 pins. -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells : Should be 2. The first cell is the GPIO number. - The second cell bits[3:0] is used to specify trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - -Optional properties: -- clocks: the clock for clocking the GPIO silicon - -Example: - -gpio0: gpio@73f84000 { - compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; - reg = <0x73f84000 0x4000>; - interrupts = <50 51>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml new file mode 100644 index 000000000000..0b223abe8cfb --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX/MXC GPIO controller + +maintainers: + - Anson Huang + +properties: + compatible: + enum: + - fsl,imx1-gpio + - fsl,imx21-gpio + - fsl,imx31-gpio + - fsl,imx35-gpio + - fsl,imx7d-gpio + + reg: + maxItems: 1 + + interrupts: + description: | + Should be the port interrupt shared by all 32 pins, if one number. + If two numbers, the first one is the interrupt shared by low 16 pins + and the second one is for high 16 pins. + minItems: 1 + maxItems: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +examples: + - | + gpio0: gpio@73f84000 { + compatible = "fsl,imx35-gpio"; + reg = <0x73f84000 0x4000>; + interrupts = <50 51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt deleted file mode 100644 index 1e677a47b836..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Freescale MXS GPIO controller - -The Freescale MXS GPIO controller is part of MXS PIN controller. The -GPIOs are organized in port/bank. Each port consists of 32 GPIOs. - -As the GPIO controller is embedded in the PIN controller and all the -GPIO ports share the same IO space with PIN controller, the GPIO node -will be represented as sub-nodes of MXS pinctrl node. - -Required properties for GPIO node: -- compatible : Should be "fsl,-gpio". The supported SoCs include - imx23 and imx28. -- interrupts : Should be the port interrupt shared by all 32 pins. -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells : Should be 2. The first cell is the GPIO number. - The second cell bits[3:0] is used to specify trigger type and level flags: - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. - -Note: Each GPIO port should have an alias correctly numbered in "aliases" -node. - -Examples: - -aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; -}; - -pinctrl@80018000 { - compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; - - gpio0: gpio@0 { - compatible = "fsl,imx28-gpio"; - interrupts = <127>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@1 { - compatible = "fsl,imx28-gpio"; - interrupts = <126>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@2 { - compatible = "fsl,imx28-gpio"; - interrupts = <125>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@3 { - compatible = "fsl,imx28-gpio"; - interrupts = <124>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@4 { - compatible = "fsl,imx28-gpio"; - interrupts = <123>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml new file mode 100644 index 000000000000..ccf5b50e798b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS GPIO controller + +maintainers: + - Shawn Guo + - Anson Huang + +description: | + The Freescale MXS GPIO controller is part of MXS PIN controller. + The GPIOs are organized in port/bank, each port consists of 32 GPIOs. + As the GPIO controller is embedded in the PIN controller and all the + GPIO ports share the same IO space with PIN controller, the GPIO node + will be represented as sub-nodes of MXS pinctrl node. + +properties: + compatible: + enum: + - fsl,imx23-pinctrl + - fsl,imx28-pinctrl + + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + reg: + maxItems: 1 + +patternProperties: + "gpio@[0-9]+$": + type: object + properties: + compatible: + enum: + - fsl,imx23-gpio + - fsl,imx28-gpio + + reg: + maxItems: 1 + + interrupts: + description: Should be the port interrupt shared by all 32 pins. + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#gpio-cells" + - gpio-controller + + additionalProperties: false + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-pinctrl"; + reg = <0x80018000 0x2000>; + + gpio@0 { + compatible = "fsl,imx28-gpio"; + reg = <0>; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1 { + compatible = "fsl,imx28-gpio"; + reg = <1>; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@2 { + compatible = "fsl,imx28-gpio"; + reg = <2>; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@3 { + compatible = "fsl,imx28-gpio"; + reg = <3>; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@4 { + compatible = "fsl,imx28-gpio"; + reg = <4>; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt deleted file mode 100644 index 10dce84b1545..000000000000 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ /dev/null @@ -1,94 +0,0 @@ -* Renesas R-Car GPIO Controller - -Required Properties: - - - compatible: should contain one or more of the following: - - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller. - - "renesas,gpio-r8a7744": for R8A7744 (RZ/G1N) compatible GPIO controller. - - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller. - - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller. - - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller. - - "renesas,gpio-r8a774b1": for R8A774B1 (RZ/G2N) compatible GPIO controller. - - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller. - - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller. - - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. - - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller. - - "renesas,gpio-r8a7792": for R8A7792 (R-Car V2H) compatible GPIO controller. - - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller. - - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller. - - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller. - - "renesas,gpio-r8a7796": for R8A77960 (R-Car M3-W) compatible GPIO controller. - - "renesas,gpio-r8a77961": for R8A77961 (R-Car M3-W+) compatible GPIO controller. - - "renesas,gpio-r8a77965": for R8A77965 (R-Car M3-N) compatible GPIO controller. - - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller. - - "renesas,gpio-r8a77980": for R8A77980 (R-Car V3H) compatible GPIO controller. - - "renesas,gpio-r8a77990": for R8A77990 (R-Car E3) compatible GPIO controller. - - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller. - - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller. - - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller. - - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 or RZ/G2 GPIO controller. - - "renesas,gpio-rcar": deprecated. - - When compatible with the generic version nodes must list the - SoC-specific version corresponding to the platform first followed by - the generic version. - - - reg: Base address and length of each memory resource used by the GPIO - controller hardware module. - - - interrupts: Interrupt specifier for the controllers interrupt. - - - gpio-controller: Marks the device node as a gpio controller. - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in . Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - - gpio-ranges: See gpio.txt. - -Optional properties: - - - clocks: Must contain a reference to the functional clock. The property is - mandatory if the hardware implements a controllable functional clock for - the GPIO instance. - - - gpio-reserved-ranges: See gpio.txt. - -Please refer to gpio.txt in this directory for the common GPIO bindings used by -client devices. - -The GPIO controller also acts as an interrupt controller. It uses the default -two cells specifier as described in Documentation/devicetree/bindings/ -interrupt-controller/interrupts.txt. - -Example: R8A77470 (RZ/G1C) GPIO controller nodes - - gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a77470", - "renesas,rcar-gen2-gpio"; - reg = <0 0xe6050000 0 0x50>; - interrupts = ; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 0 23>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; - resets = <&cpg 912>; - }; - ... - gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a77470", - "renesas,rcar-gen2-gpio"; - reg = <0 0xe6053000 0 0x50>; - interrupts = ; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 96 30>; - gpio-reserved-ranges = <17 10>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; - resets = <&cpg 909>; - }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml new file mode 100644 index 000000000000..397d9383d15a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/renesas,rcar-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car General-Purpose Input/Output Ports (GPIO) + +maintainers: + - Geert Uytterhoeven + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,gpio-r8a7778 # R-Car M1 + - renesas,gpio-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-gpio # R-Car Gen1 + + - items: + - enum: + - renesas,gpio-r8a7742 # RZ/G1H + - renesas,gpio-r8a7743 # RZ/G1M + - renesas,gpio-r8a7744 # RZ/G1N + - renesas,gpio-r8a7745 # RZ/G1E + - renesas,gpio-r8a77470 # RZ/G1C + - renesas,gpio-r8a7790 # R-Car H2 + - renesas,gpio-r8a7791 # R-Car M2-W + - renesas,gpio-r8a7792 # R-Car V2H + - renesas,gpio-r8a7793 # R-Car M2-N + - renesas,gpio-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1 + + - items: + - enum: + - renesas,gpio-r8a774a1 # RZ/G2M + - renesas,gpio-r8a774b1 # RZ/G2N + - renesas,gpio-r8a774c0 # RZ/G2E + - renesas,gpio-r8a7795 # R-Car H3 + - renesas,gpio-r8a7796 # R-Car M3-W + - renesas,gpio-r8a77961 # R-Car M3-W+ + - renesas,gpio-r8a77965 # R-Car M3-N + - renesas,gpio-r8a77970 # R-Car V3M + - renesas,gpio-r8a77980 # R-Car V3H + - renesas,gpio-r8a77990 # R-Car E3 + - renesas,gpio-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 8 + +patternProperties: + "^.*$": + if: + type: object + then: + properties: + gpio-hog: true + gpios: true + input: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupt-controller + - '#interrupt-cells' + +if: + not: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen1-gpio +then: + required: + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include + #include + #include + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio"; + reg = <0xe6053000 0x50>; + interrupts = ; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 909>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 30>; + gpio-reserved-ranges = <17 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml index 418e8381e07c..a0efd8dc2538 100644 --- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml @@ -57,7 +57,7 @@ examples: compatible = "sifive,fu540-c000-gpio", "sifive,gpio0"; interrupt-parent = <&plic>; interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>; - reg = <0x0 0x10060000 0x0 0x1000>; + reg = <0x10060000 0x1000>; clocks = <&tlclk PRCI_CLK_TLCLK>; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 0b229a7d4a98..b1844b9c295d 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -43,9 +43,15 @@ properties: operating-points-v2: true + power-domains: + maxItems: 1 + resets: maxItems: 2 + "#cooling-cells": + const: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 0407e45eb8c4..80d519a76db2 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -16,33 +16,33 @@ properties: oneOf: - items: - enum: - - samsung,exynos5250-mali + - samsung,exynos5250-mali - const: arm,mali-t604 - items: - enum: - - samsung,exynos5420-mali + - samsung,exynos5420-mali - const: arm,mali-t628 - items: - enum: - - allwinner,sun50i-h6-mali + - allwinner,sun50i-h6-mali - const: arm,mali-t720 - items: - enum: - - amlogic,meson-gxm-mali - - realtek,rtd1295-mali + - amlogic,meson-gxm-mali + - realtek,rtd1295-mali - const: arm,mali-t820 - items: - enum: - - arm,juno-mali + - arm,juno-mali - const: arm,mali-t624 - items: - enum: - - rockchip,rk3288-mali - - samsung,exynos5433-mali + - rockchip,rk3288-mali + - samsung,exynos5433-mali - const: arm,mali-t760 - items: - enum: - - rockchip,rk3399-mali + - rockchip,rk3399-mali - const: arm,mali-t860 # "arm,mali-t830" @@ -87,6 +87,8 @@ properties: "#cooling-cells": const: 2 + dma-coherent: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index f5401cc8de4a..6226d31ec4b7 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -41,6 +41,7 @@ properties: - amlogic,meson-gxbb-mali - amlogic,meson-gxl-mali - hisilicon,hi6220-mali + - mediatek,mt7623-mali - rockchip,rk3328-mali - const: arm,mali-450 @@ -107,6 +108,9 @@ properties: operating-points-v2: true + "#cooling-cells": + const: 2 + required: - compatible - reg @@ -130,6 +134,7 @@ allOf: - amlogic,meson8-mali - amlogic,meson8b-mali - hisilicon,hi6220-mali + - mediatek,mt7623-mali - rockchip,rk3036-mali - rockchip,rk3066-mali - rockchip,rk3188-mali @@ -164,6 +169,7 @@ examples: clocks = <&ccu 1>, <&ccu 2>; clock-names = "bus", "core"; resets = <&ccu 1>; + #cooling-cells = <2>; }; ... diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index 0bc4b38d5cbb..e1ac6ff5a230 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -9,7 +9,7 @@ title: Vivante GPU Bindings description: Vivante GPU core devices maintainers: - - Lucas Stach + - Lucas Stach properties: compatible: diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 7db78767c02d..af35b77053df 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -34,8 +34,7 @@ properties: description: Value specifying the number of pulses per revolution of the controlled FAN. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4] required: diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 44a63fffb4be..eef614962b10 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 @@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0 @@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index 46c441574f98..dfa821c0aacc 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -46,22 +46,20 @@ patternProperties: set to 1 the attenuator is bypassed if set to 0 the attenuator is not bypassed. If the property is absent then the attenuator retains it's configuration from the bios/bootloader. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] "^adi,pwm-active-state$": description: | Integer array, represents the active state of the pwm outputs If set to 0 the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm uses a logic high output for 100% duty cycle. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - enum: [0, 1] - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt deleted file mode 100644 index ffb79ccf51ee..000000000000 --- a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt +++ /dev/null @@ -1,26 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the hardware monitor -portion of the driver. - -This binding must be part of the Lochnagar MFD binding: - [4] ../mfd/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar2-hwmon" - -Example: - -lochnagar-hwmon { - compatible = "cirrus,lochnagar2-hwmon"; -}; diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..cc00b97a7dac --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the hardware monitor + portion of the driver. + + This binding must be part of the Lochnagar MFD binding: + [1] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar2-hwmon + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 3f043e943668..90b2fa3f7752 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -45,16 +45,14 @@ properties: The gain value for the PGA function. This is 8, 4, 2 or 1. The PGA gain affect the shunt voltage range. The range will be equal to: pga-gain * 40mV - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] default: 8 ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000 @@ -63,14 +61,13 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - default: 0x00 - minimum: 0x00 - maximum: 0xFF + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt index c9a6587fe4bb..a8a35df41951 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt @@ -13,7 +13,7 @@ Recommended properties: Example: -i2c@20205000 { +i2c@7e205000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; interrupts = <2 21>; diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml new file mode 100644 index 000000000000..dc0952f3780f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence I2C controller Device Tree Bindings + +maintainers: + - Michal Simek + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - cdns,i2c-r1p10 # cadence i2c controller version 1.0 + - cdns,i2c-r1p14 # cadence i2c controller version 1.4 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 400000 + description: | + Desired operating frequency, in Hz, of the bus. + + clock-name: + const: pclk + description: | + Input clock name. + +required: + - compatible + - reg + - clocks + - interrupts + +examples: + - | + #include + i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + clocks = <&clkc 38>; + interrupts = ; + reg = <0xe0004000 0x1000>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt deleted file mode 100644 index ebaa90c58c8e..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt +++ /dev/null @@ -1,28 +0,0 @@ -Binding for the Cadence I2C controller - -Required properties: - - reg: Physical base address and size of the controller's register area. - - compatible: Should contain one of: - * "cdns,i2c-r1p10" - Note: Use this when cadence i2c controller version 1.0 is used. - * "cdns,i2c-r1p14" - Note: Use this when cadence i2c controller version 1.4 is used. - - clocks: Input clock specifier. Refer to common clock bindings. - - interrupts: Interrupt specifier. Refer to interrupt bindings. - - #address-cells: Should be 1. - - #size-cells: Should be 0. - -Optional properties: - - clock-frequency: Desired operating frequency, in Hz, of the bus. - - clock-names: Input clock name, should be 'pclk'. - -Example: - i2c@e0004000 { - compatible = "cdns,i2c-r1p10"; - clocks = <&clkc 38>; - interrupts = ; - reg = <0xe0004000 0x1000>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt deleted file mode 100644 index d229eff5ca1b..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Ingenic JZ4780 I2C Bus controller - -Required properties: -- compatible: should be one of the following: - - "ingenic,jz4780-i2c" for the JZ4780 - - "ingenic,x1000-i2c" for the X1000 -- reg: Should contain the address & size of the I2C controller registers. -- interrupts: Should specify the interrupt provided by parent. -- clocks: Should contain a single clock specifier for the JZ4780 I2C clock. -- clock-frequency: desired I2C bus clock frequency in Hz. - -Recommended properties: -- pinctrl-names: should be "default"; -- pinctrl-0: phandle to pinctrl function - -Example - -/ { - i2c4: i2c4@10054000 { - compatible = "ingenic,jz4780-i2c"; - reg = <0x10054000 0x1000>; - - interrupt-parent = <&intc>; - interrupts = <56>; - - clocks = <&cgu JZ4780_CLK_SMB4>; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pins_i2c4_data>; - - }; -}; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt index 68f6d73a8b73..88b71c1b32c9 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt @@ -8,6 +8,7 @@ Required properties: "mediatek,mt2712-i2c": for MediaTek MT2712 "mediatek,mt6577-i2c": for MediaTek MT6577 "mediatek,mt6589-i2c": for MediaTek MT6589 + "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797 "mediatek,mt7622-i2c": for MediaTek MT7622 "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 61eac76c84c4..790aa7218ee0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -28,14 +28,14 @@ properties: - const: rockchip,rk3399-i2c - items: - enum: - - rockchip,rk3036-i2c - - rockchip,rk3368-i2c + - rockchip,rk3036-i2c + - rockchip,rk3368-i2c - const: rockchip,rk3288-i2c - items: - enum: - - rockchip,px30-i2c - - rockchip,rk3308-i2c - - rockchip,rk3328-i2c + - rockchip,px30-i2c + - rockchip,rk3308-i2c + - rockchip,rk3328-i2c - const: rockchip,rk3399-i2c reg: diff --git a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt b/Documentation/devicetree/bindings/i2c/i2c-xiic.txt deleted file mode 100644 index caf42e989462..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-xiic.txt +++ /dev/null @@ -1,25 +0,0 @@ -Xilinx IIC controller: - -Required properties: -- compatible : Must be "xlnx,xps-iic-2.00.a" -- reg : IIC register location and length -- interrupts : IIC controller unterrupt -- #address-cells = <1> -- #size-cells = <0> -- clocks: Input clock specifier. Refer to common clock bindings. - -Optional properties: -- Child nodes conforming to i2c bus binding -- clock-names: Input clock name, should be 'pclk'. - -Example: - - axi_iic_0: i2c@40800000 { - compatible = "xlnx,xps-iic-2.00.a"; - clocks = <&clkc 15>; - interrupts = < 1 2 >; - reg = < 0x40800000 0x10000 >; - - #size-cells = <0>; - #address-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml new file mode 100644 index 000000000000..682ed1bbf5c6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs I2C controller devicetree bindings + +maintainers: + - Paul Cercueil + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + $nodename: + pattern: "^i2c@[0-9a-f]+$" + + compatible: + enum: + - ingenic,jz4780-i2c + - ingenic,x1000-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000 ] + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-frequency + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + i2c@10054000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10054000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <56>; + + clocks = <&cgu JZ4780_CLK_SMB4>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4_data>; + + dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>, + <&dma JZ4780_DMA_SMB4_TX 0xffffffff>; + dma-names = "rx", "tx"; + + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + + interrupt-parent = <&gpf>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index f64064f8bdc2..18c0de362451 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -35,6 +35,12 @@ Required properties: Due to above changes, Tegra114 I2C driver makes incompatible with previous hardware driver. Hence, tegra114 I2C controller is compatible with "nvidia,tegra114-i2c". + nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is part of the + host1x domain and typically used for camera use-cases. This VI I2C + controller is mostly compatible with the programming model of the + regular I2C controllers with a few exceptions. The I2C registers start + at an offset of 0xc00 (instead of 0), registers are 16 bytes apart + (rather than 4) and the controller does not support slave mode. - reg: Should contain I2C controller registers physical address and length. - interrupts: Should contain I2C controller interrupts. - address-cells: Address cells for I2C device address. diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt index c359965d0724..a03f9f5cb378 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt @@ -2,6 +2,7 @@ I2C for R-Car platforms Required properties: - compatible: + "renesas,i2c-r8a7742" if the device is a part of a R8A7742 SoC. "renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC. "renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC. "renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC. diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt index ffe085c9947e..89facb09337a 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt @@ -4,6 +4,7 @@ Required properties: - compatible : - "renesas,iic-r8a73a4" (R-Mobile APE6) - "renesas,iic-r8a7740" (R-Mobile A1) + - "renesas,iic-r8a7742" (RZ/G1H) - "renesas,iic-r8a7743" (RZ/G1M) - "renesas,iic-r8a7744" (RZ/G1N) - "renesas,iic-r8a7745" (RZ/G1E) diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 900ec1ab6a47..7b3342354bbb 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -17,6 +17,7 @@ allOf: contains: enum: - st,stm32f7-i2c + - st,stm32mp15-i2c then: properties: i2c-scl-rising-time-ns: @@ -30,11 +31,10 @@ allOf: Fast Mode Plus speed is selected by slave. Format is phandle to syscfg / register offset within syscfg / register bitmask for FMP bit. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 - if: properties: @@ -52,6 +52,7 @@ properties: enum: - st,stm32f4-i2c - st,stm32f7-i2c + - st,stm32mp15-i2c reg: maxItems: 1 @@ -121,12 +122,12 @@ examples: clocks = <&rcc 1 CLK_I2C1>; }; - //Example 3 (with st,stm32f7-i2c compatible on stm32mp) + //Example 3 (with st,stm32mp15-i2c compatible on stm32mp) #include #include #include i2c@40013000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x40013000 0x400>; diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml new file mode 100644 index 000000000000..67c1c84ba3dc --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ilinx IIC controller Device Tree Bindings + +maintainers: + - info@mocean-labs.com + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: xlnx,xps-iic-2.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + clock-name: + const: pclk + description: | + Input clock name. + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + clocks = <&clkc 15>; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index f0934b295edc..deb34deff0e8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -72,8 +72,8 @@ patternProperties: The channel number. It can have up to 8 channels on ad7124-4 and 16 channels on ad7124-8, numbered from 0 to 15. items: - minimum: 0 - maximum: 15 + minimum: 0 + maximum: 15 adi,reference-select: description: | @@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 118809a03279..6a991e9f78e2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology / Analog Devices LTC2496 ADC maintainers: - - Lars-Peter Clausen - - Michael Hennerich - - Stefan Popa + - Lars-Peter Clausen + - Michael Hennerich + - Stefan Popa properties: compatible: @@ -18,8 +18,7 @@ properties: vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle reg: description: spi chipselect number according to the usual spi bindings diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 8ffeceb6abae..95ab285f4eba 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -38,10 +38,9 @@ properties: microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 vref-supply: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index dd8eb15aeb63..28417b31b558 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -76,8 +76,7 @@ properties: description: Phandle to system configuration controller. It can be used to control the analog circuitry on stm32mp1. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" interrupt-controller: true @@ -247,8 +246,7 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | @@ -256,8 +254,7 @@ patternProperties: - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and stm32mp1. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array st,adc-diff-channels: description: | @@ -270,18 +267,17 @@ patternProperties: required. Both properties can be used together. Some channels can be used as single-ended and some other ones as differential (mixed). But channels can't be configured both as single-ended and differential. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "vinp" indicates positive input number - minimum: 0 - maximum: 19 - - description: | - "vinn" indicates negative input number - minimum: 0 - maximum: 19 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "vinp" indicates positive input number + minimum: 0 + maximum: 19 + - description: | + "vinn" indicates negative input number + minimum: 0 + maximum: 19 st,min-sample-time-nsecs: description: @@ -291,8 +287,7 @@ patternProperties: array that matches "st,adc-channels" and/or "st,adc-diff-channels" list, to set sample time resp. for all channels, or independently for each channel. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array allOf: - if: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index b1627441a0b2..d61bc011e820 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | @@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 "#io-channel-cells": const: 1 @@ -130,8 +127,7 @@ patternProperties: - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: | @@ -142,8 +138,7 @@ patternProperties: - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description: diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt deleted file mode 100644 index 900c169de00f..000000000000 --- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt +++ /dev/null @@ -1,37 +0,0 @@ -Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope -and externally connectable Magnetometer - -https://www.bosch-sensortec.com/bst/products/all_products/bmi160 - -Required properties: - - compatible : should be "bosch,bmi160" - - reg : the I2C address or SPI chip select number of the sensor - - spi-max-frequency : set maximum clock frequency (only for SPI) - -Optional properties: - - interrupts : interrupt mapping for IRQ - - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt - input, set to "INT2" if INT2 pin should be used instead - - drive-open-drain : set if the specified interrupt pin should be configured as - open drain. If not set, defaults to push-pull. - -Examples: - -bmi160@68 { - compatible = "bosch,bmi160"; - reg = <0x68>; - - interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; -}; - -bmi160@0 { - compatible = "bosch,bmi160"; - reg = <0>; - spi-max-frequency = <10000000>; - - interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT2"; -}; diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml new file mode 100644 index 000000000000..0d0ef84e22b9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI160 + +maintainers: + - Jonathan Cameron + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope and externally + connectable Magnetometer + https://www.bosch-sensortec.com/bst/products/all_products/bmi160 + +properties: + compatible: + const: bosch,bmi160 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + enum: + - INT1 + - INT2 + description: | + set to "INT1" if INT1 pin should be used as interrupt input, set + to "INT2" if INT2 pin should be used instead + + drive-open-drain: + description: | + set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. + +required: + - compatible + - reg + +examples: + - | + // Example for I2C + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bmi160@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + - | + // Example for SPI + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + + bmi160@0 { + compatible = "bosch,bmi160"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index e8f7d1ada57b..d81229857944 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -33,13 +33,12 @@ properties: amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 8fb46de6641d..40ccbe7b5c13 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 '#address-cells': const: 1 @@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9 @@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended: @@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18 @@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] adi,rsense-share: description: @@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64 @@ -260,7 +252,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] "^thermistor@": type: object @@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27 @@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] adi,custom-thermistor: description: @@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6 @@ -349,7 +337,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] "^adc@": type: object @@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended: @@ -379,8 +366,7 @@ patternProperties: adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms: diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst new file mode 100644 index 000000000000..3837b17c234f --- /dev/null +++ b/Documentation/devicetree/bindings/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========== +Device Tree +=========== + +.. toctree:: + :maxdepth: 1 + + ABI + submitting-patches + writing-bindings diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 5b3b71c9c018..cffd02028d02 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -16,8 +16,8 @@ properties: - const: allwinner,sun4i-a10-lradc-keys - const: allwinner,sun8i-a83t-r-lradc - items: - - const: allwinner,sun50i-a64-lradc - - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc reg: maxItems: 1 @@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to voltage: diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt deleted file mode 100644 index 4d9a3717eaaf..000000000000 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ /dev/null @@ -1,45 +0,0 @@ -Device-Tree bindings for input/gpio_keys_polled.c keyboard driver - -Required properties: - - compatible = "gpio-keys-polled"; - - poll-interval: Poll interval time in milliseconds - -Optional properties: - - autorepeat: Boolean, Enable auto repeat feature of Linux input - subsystem. - -Each button (key) is represented as a sub-node of "gpio-keys-polled": -Subnode properties: - - - gpios: OF device-tree gpio specification. - - label: Descriptive name of the key. - - linux,code: Key / Axis code to emit. - -Optional subnode-properties: - - linux,input-type: Specify event type this button/key generates. - If not specified defaults to <1> == EV_KEY. - - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this - value is sent for events this button generates when pressed. - EV_ABS/EV_REL axis will generate an event with a value of 0 when - all buttons with linux,input-type == type and linux,code == axis - are released. This value is interpreted as a signed 32 bit value, - e.g. to make a button generate a value of -1 use: - linux,input-value = <0xffffffff>; /* -1 */ - - debounce-interval: Debouncing interval time in milliseconds. - If not specified defaults to 5. - - wakeup-source: Boolean, button can wake-up the system. - (Legacy property supported: "gpio-key,wakeup") - -Example nodes: - - gpio_keys_polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - autorepeat; - - button21 { - label = "GPIO Key UP"; - linux,code = <103>; - gpios = <&gpio1 0 1>; - }; - ... diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt deleted file mode 100644 index 7cccc49b6bea..000000000000 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ /dev/null @@ -1,58 +0,0 @@ -Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver - -Required properties: - - compatible = "gpio-keys"; - -Optional properties: - - autorepeat: Boolean, Enable auto repeat feature of Linux input - subsystem. - - label: String, name of the input device. - -Each button (key) is represented as a sub-node of "gpio-keys": -Subnode properties: - - - gpios: OF device-tree gpio specification. - - interrupts: the interrupt line for that input. - - label: Descriptive name of the key. - - linux,code: Keycode to emit. - -Note that either "interrupts" or "gpios" properties can be omitted, but not -both at the same time. Specifying both properties is allowed. - -Optional subnode-properties: - - linux,input-type: Specify event type this button/key generates. - If not specified defaults to <1> == EV_KEY. - - debounce-interval: Debouncing interval time in milliseconds. - If not specified defaults to 5. - - wakeup-source: Boolean, button can wake-up the system. - (Legacy property supported: "gpio-key,wakeup") - - wakeup-event-action: Specifies whether the key should wake the - system when asserted, when deasserted, or both. This property is - only valid for keys that wake up the system (e.g., when the - "wakeup-source" property is also provided). - Supported values are defined in linux-event-codes.h: - EV_ACT_ASSERTED - asserted - EV_ACT_DEASSERTED - deasserted - EV_ACT_ANY - both asserted and deasserted - - linux,can-disable: Boolean, indicates that button is connected - to dedicated (not shared) interrupt which can be disabled to - suppress events from the button. - -Example nodes: - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - up { - label = "GPIO Key UP"; - linux,code = <103>; - gpios = <&gpio1 0 1>; - }; - - down { - label = "GPIO Key DOWN"; - linux,code = <108>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - }; - ... diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml new file mode 100644 index 000000000000..6966ab009fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device-Tree bindings for GPIO attached keys + +maintainers: + - Rob Herring + +properties: + compatible: + enum: + - gpio-keys + - gpio-keys-polled + +patternProperties: + ".*": + if: + type: object + then: + $ref: input.yaml# + + properties: + gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + label: + description: Descriptive name of the key. + + linux,code: + description: Key / Axis code to emit. + $ref: /schemas/types.yaml#definitions/uint32 + + linux,input-type: + description: + Specify event type this button/key generates. If not specified defaults to + <1> == EV_KEY. + $ref: /schemas/types.yaml#definitions/uint32 + + default: 1 + + linux,input-value: + description: | + If linux,input-type is EV_ABS or EV_REL then this + value is sent for events this button generates when pressed. + EV_ABS/EV_REL axis will generate an event with a value of 0 + when all buttons with linux,input-type == type and + linux,code == axis are released. This value is interpreted + as a signed 32 bit value, e.g. to make a button generate a + value of -1 use: + + linux,input-value = <0xffffffff>; /* -1 */ + + $ref: /schemas/types.yaml#definitions/uint32 + + debounce-interval: + description: + Debouncing interval time in milliseconds. If not specified defaults to 5. + $ref: /schemas/types.yaml#definitions/uint32 + + default: 5 + + wakeup-source: + description: Button can wake-up the system. + + wakeup-event-action: + description: | + Specifies whether the key should wake the system when asserted, when + deasserted, or both. This property is only valid for keys that wake up the + system (e.g., when the "wakeup-source" property is also provided). + + Supported values are defined in linux-event-codes.h: + + EV_ACT_ANY - both asserted and deasserted + EV_ACT_ASSERTED - asserted + EV_ACT_DEASSERTED - deasserted + $ref: /schemas/types.yaml#definitions/uint32 + enum: [0, 1, 2] + + linux,can-disable: + description: + Indicates that button is connected to dedicated (not shared) interrupt + which can be disabled to suppress events from the button. + type: boolean + + pinctrl-0: + maxItems: 1 + + pinctrl-names: + maxItems: 1 + + required: + - linux,code + + anyOf: + - required: + - interrupts + - required: + - gpios + + dependencies: + wakeup-event-action: [ wakeup-source ] + linux,input-value: [ gpios ] + + unevaluatedProperties: false + +if: + properties: + compatible: + const: gpio-keys-polled +then: + properties: + poll-interval: + description: + Poll interval time in milliseconds + $ref: /schemas/types.yaml#definitions/uint32 + + required: + - poll-interval + +additionalProperties: false + +examples: + - | + #include + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + up { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio1 0 1>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = <108>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 6d519046b3af..8edcb3c31270 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff poll-interval: description: Poll interval time in milliseconds. diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml index 5625c222903a..77fe3b545b35 100644 --- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml +++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml @@ -30,10 +30,9 @@ properties: - azoteq,iqs625-keys linux,keycodes: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 16 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 description: | Specifies the numeric keycodes associated with each available touch or proximity event according to the following table. An 'x' indicates the diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 383d64a91854..024b262a2ef7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -42,7 +42,7 @@ properties: - focaltech,ft6236 reg: - const: 0x38 + maxItems: 1 interrupts: maxItems: 1 @@ -61,33 +61,29 @@ properties: gain: description: Allows setting the sensitivity in the range from 0 to 31. Note that lower values indicate higher sensitivity. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset: description: Allows setting the edge compensation in the range from 0 to 31. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset-x: description: Same as offset, but applies only to the horizontal position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 offset-y: description: Same as offset, but applies only to the vertical position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 touchscreen-size-x: true touchscreen-size-y: true diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index c8ea9434c9cc..e81cfa56f25a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -63,7 +63,7 @@ required: - interrupts examples: -- | + - | i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml index 4107e60cab12..e1009ae4e8f7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml @@ -10,8 +10,8 @@ maintainers: - Georgi Djakov description: | - The Qualcomm MSM8916 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm MSM8916 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml index 9af3c6e59cff..8004c4baf397 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml @@ -10,8 +10,8 @@ maintainers: - Brian Masney description: | - The Qualcomm MSM8974 interconnect providers support setting system - bandwidth requirements between various network-on-chip fabrics. + The Qualcomm MSM8974 interconnect providers support setting system + bandwidth requirements between various network-on-chip fabrics. properties: reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml index 8d65c5f80679..3fbb8785fbc9 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml @@ -10,8 +10,8 @@ maintainers: - Georgi Djakov description: | - The Qualcomm QCS404 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + The Qualcomm QCS404 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. properties: reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml index 50f78f87f3fb..d01bac80d416 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml @@ -65,21 +65,21 @@ examples: config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; - reg = <0 0x01500000 0 0x28000>; + reg = <0x01500000 0x28000>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sc7180-system-noc"; - reg = <0 0x01620000 0 0x17080>; + reg = <0x01620000 0x17080>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sc7180-mmss-noc"; - reg = <0 0x01740000 0 0x1c100>; + reg = <0x01740000 0x1c100>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml index 8b087e0b0b81..74536747b51d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml @@ -60,14 +60,14 @@ examples: mem_noc: interconnect@1380000 { compatible = "qcom,sdm845-mem-noc"; - reg = <0 0x01380000 0 0x27200>; + reg = <0x01380000 0x27200>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sdm845-mmss-noc"; - reg = <0 0x01740000 0 0x1c1000>; + reg = <0x01740000 0x1c1000>; #interconnect-cells = <1>; qcom,bcm-voter-names = "apps", "disp"; qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index cf09055da78b..7cd6b8bacfa0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -27,15 +27,15 @@ properties: deprecated: true - const: allwinner,sun7i-a20-sc-nmi - items: - - const: allwinner,sun8i-a83t-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun8i-a83t-r-intc + - const: allwinner,sun6i-a31-r-intc - const: allwinner,sun9i-a80-sc-nmi - items: - - const: allwinner,sun50i-a64-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-a64-r-intc + - const: allwinner,sun6i-a31-r-intc - items: - - const: allwinner,sun50i-h6-r-intc - - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun50i-h6-r-intc + - const: allwinner,sun6i-a31-r-intc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 66aacd106503..1ecd1831cf02 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -91,18 +91,16 @@ properties: description: If using padding pages, specifies the stride of consecutive redistributors. Must be a multiple of 64kB. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64 - - multipleOf: 0x10000 - exclusiveMinimum: 0 + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0 "#redistributor-regions": description: The number of independent contiguous regions occupied by the redistributors. Required if more than one such region is present. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 4096 # Should be enough? + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096 msi-controller: description: @@ -114,22 +112,20 @@ properties: A list of pairs , where "intid" is the first SPI of a range that can be used an MBI, and "span" the size of that range. Multiple ranges can be provided. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 mbi-alias: description: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2 ppi-partitions: type: object @@ -188,11 +184,10 @@ patternProperties: description: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 9a47820ef346..96f8803ff4e6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -39,6 +39,12 @@ properties: - qcom,msm-8660-qgic - qcom,msm-qgic2 + - items: + - const: arm,gic-400 + - enum: + - arm,cortex-a15-gic + - arm,cortex-a7-gic + - items: - const: arm,arm1176jzf-devchip-gic - const: arm,arm11mp-gic @@ -125,6 +131,9 @@ properties: power-domains: maxItems: 1 + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt deleted file mode 100644 index 582991c426ee..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt +++ /dev/null @@ -1,35 +0,0 @@ -Freescale IRQSTEER Interrupt multiplexer - -Required properties: - -- compatible: should be: - - "fsl,imx8m-irqsteer" - - "fsl,imx-irqsteer" -- reg: Physical base address and size of registers. -- interrupts: Should contain the up to 8 parent interrupt lines used to - multiplex the input interrupts. They should be specified sequentially - from output 0 to 7. -- clocks: Should contain one clock for entry in clock-names - see Documentation/devicetree/bindings/clock/clock-bindings.txt -- clock-names: - - "ipg": main logic clock -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- fsl,channel: The output channel that all input IRQs should be steered into. -- fsl,num-irqs: Number of input interrupts of this channel. - Should be multiple of 32 input interrupts and up to 512 interrupts. - -Example: - - interrupt-controller@32e2d000 { - compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; - reg = <0x32e2d000 0x1000>; - interrupts = ; - clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; - clock-names = "ipg"; - fsl,channel = <0>; - fsl,num-irqs = <64>; - interrupt-controller; - #interrupt-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml new file mode 100644 index 000000000000..360a575ef8b0 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IRQSTEER Interrupt Multiplexer + +maintainers: + - Lucas Stach + +properties: + compatible: + enum: + - fsl,imx8m-irqsteer + - fsl,imx-irqsteer + + reg: + maxItems: 1 + + interrupts: + description: | + should contain the up to 8 parent interrupt lines used to multiplex + the input interrupts. They should be specified sequentially from + output 0 to 7. + items: + - description: output interrupt 0 + - description: output interrupt 1 + - description: output interrupt 2 + - description: output interrupt 3 + - description: output interrupt 4 + - description: output interrupt 5 + - description: output interrupt 6 + - description: output interrupt 7 + minItems: 1 + maxItems: 8 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + fsl,channel: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + u32 value representing the output channel that all input IRQs should be + steered into. + + fsl,num-irqs: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + u32 value representing the number of input interrupts of this channel, + should be multiple of 32 input interrupts and up to 512 interrupts. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - interrupt-controller + - "#interrupt-cells" + - fsl,channel + - fsl,num-irqs + +additionalProperties: false + +examples: + - | + #include + #include + + interrupt-controller@32e2d000 { + compatible = "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,num-irqs = <64>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt deleted file mode 100644 index d4373d0f7121..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt +++ /dev/null @@ -1,28 +0,0 @@ -Ingenic SoC Interrupt Controller - -Required properties: - -- compatible : should be "ingenic,-intc". Valid strings are: - ingenic,jz4740-intc - ingenic,jz4725b-intc - ingenic,jz4770-intc - ingenic,jz4775-intc - ingenic,jz4780-intc -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 1. -- interrupts : Specifies the CPU interrupt the controller is connected to. - -Example: - -intc: interrupt-controller@10001000 { - compatible = "ingenic,jz4740-intc"; - reg = <0x10001000 0x14>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&cpuintc>; - interrupts = <2>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml new file mode 100644 index 000000000000..28b27e1a6e9d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs interrupt controller devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + $nodename: + pattern: "^interrupt-controller@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4740-intc + - ingenic,jz4760-intc + - ingenic,jz4780-intc + - items: + - enum: + - ingenic,jz4775-intc + - ingenic,jz4770-intc + - const: ingenic,jz4760-intc + - items: + - const: ingenic,x1000-intc + - const: ingenic,jz4780-intc + - items: + - const: ingenic,jz4725b-intc + - const: ingenic,jz4740-intc + + "#interrupt-cells": + const: 1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + intc: interrupt-controller@10001000 { + compatible = "ingenic,jz4770-intc", "ingenic,jz4760-intc"; + reg = <0x10001000 0x40>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index ccc507f384d2..14dced11877b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -25,10 +25,10 @@ properties: compatible: items: - enum: - - intel,ixp42x-interrupt - - intel,ixp43x-interrupt - - intel,ixp45x-interrupt - - intel,ixp46x-interrupt + - intel,ixp42x-interrupt + - intel,ixp43x-interrupt + - intel,ixp45x-interrupt + - intel,ixp46x-interrupt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 26f1fcf0857a..b1db21ed44e9 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -54,11 +54,9 @@ properties: and each bit in the cell refers to a children interrupt fron 0 to 31. If a CPU interrupt line didn't connected with liointc, then keep it's cell with zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 4 - maxItems: 4 - + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 required: - compatible diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt deleted file mode 100644 index 772c550d3b4b..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt +++ /dev/null @@ -1,62 +0,0 @@ -DT bindings for the R-/SH-Mobile irqpin controller - -Required properties: - -- compatible: has to be "renesas,intc-irqpin-", "renesas,intc-irqpin" - as fallback. - Examples with soctypes are: - - "renesas,intc-irqpin-r8a7740" (R-Mobile A1) - - "renesas,intc-irqpin-r8a7778" (R-Car M1A) - - "renesas,intc-irqpin-r8a7779" (R-Car H1) - - "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5) - -- reg: Base address and length of each register bank used by the external - IRQ pins driven by the interrupt controller hardware module. The base - addresses, length and number of required register banks varies with soctype. -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory. -- interrupts: Must contain a list of interrupt specifiers. For each interrupt - provided by this irqpin controller instance, there must be one entry, - referring to the corresponding parent interrupt. - -Optional properties: - -- any properties, listed in interrupts.txt, and any standard resource allocation - properties -- sense-bitfield-width: width of a single sense bitfield in the SENSE register, - if different from the default 4 bits -- control-parent: disable and enable interrupts on the parent interrupt - controller, needed for some broken implementations -- clocks: Must contain a reference to the functional clock. This property is - mandatory if the hardware implements a controllable functional clock for - the irqpin controller instance. -- power-domains: Must contain a reference to the power domain. This property is - mandatory if the irqpin controller instance is part of a controllable power - domain. - - -Example -------- - - irqpin1: interrupt-controller@e6900004 { - compatible = "renesas,intc-irqpin-r8a7740", - "renesas,intc-irqpin"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0xe6900004 4>, - <0xe6900014 4>, - <0xe6900024 1>, - <0xe6900044 1>, - <0xe6900064 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks R8A7740_CLK_INTCA>; - power-domains = <&pd_a4s>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml new file mode 100644 index 000000000000..f4aae56c6469 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/renesas,intc-irqpin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Interrupt Controller (INTC) for external pins + +maintainers: + - Geert Uytterhoeven + +properties: + compatible: + items: + - enum: + - renesas,intc-irqpin-r8a7740 # R-Mobile A1 + - renesas,intc-irqpin-r8a7778 # R-Car M1A + - renesas,intc-irqpin-r8a7779 # R-Car H1 + - renesas,intc-irqpin-sh73a0 # SH-Mobile AG5 + - const: renesas,intc-irqpin + + reg: + minItems: 5 + items: + - description: Interrupt control register + - description: Interrupt priority register + - description: Interrupt source register + - description: Interrupt mask register + - description: Interrupt mask clear register + - description: Interrupt control register for ICR0 with IRLM0 bit + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + minItems: 1 + maxItems: 8 + + sense-bitfield-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + default: 4 + description: + Width of a single sense bitfield in the SENSE register, if different from the + default. + + control-parent: + type: boolean + description: + Disable and enable interrupts on the parent interrupt controller, needed for some + broken implementations. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - interrupts + +if: + properties: + compatible: + contains: + enum: + - renesas,intc-irqpin-r8a7740 + - renesas,intc-irqpin-sh73a0 +then: + required: + - clocks + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + #include + + irqpin1: interrupt-controller@e6900004 { + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index ee5273b6c5a3..b67b8cbd33fc 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - renesas,irqc-r8a73a4 # R-Mobile APE6 + - renesas,irqc-r8a7742 # RZ/G1H - renesas,irqc-r8a7743 # RZ/G1M - renesas,irqc-r8a7744 # RZ/G1N - renesas,irqc-r8a7745 # RZ/G1E @@ -78,7 +79,7 @@ examples: compatible = "renesas,irqc-r8a7790", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; + reg = <0xe61c0000 0x200>; interrupts = , , , diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml index 9e5c6608b4e3..2a5b29567926 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml @@ -14,13 +14,13 @@ properties: compatible: oneOf: - items: - - enum: - - st,stm32-exti - - st,stm32h7-exti + - enum: + - st,stm32-exti + - st,stm32h7-exti - items: - - enum: - - st,stm32mp1-exti - - const: syscon + - enum: + - st,stm32mp1-exti + - const: syscon "#interrupt-cells": const: 2 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 6515dbe47508..218f7ecb4703 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -28,6 +28,7 @@ properties: - enum: - qcom,msm8996-smmu-v2 - qcom,msm8998-smmu-v2 + - qcom,sc7180-smmu-v2 - qcom,sdm845-smmu-v2 - const: qcom,smmu-v2 @@ -56,8 +57,7 @@ properties: '#global-interrupts': description: The number of global interrupts exposed by the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt deleted file mode 100644 index 020d6f226efb..000000000000 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ /dev/null @@ -1,73 +0,0 @@ -* Renesas VMSA-Compatible IOMMU - -The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables. -It provides address translation for bus masters outside of the CPU, each -connected to the IPMMU through a port called micro-TLB. - - -Required Properties: - - - compatible: Must contain SoC-specific and generic entry below in case - the device is compatible with the R-Car Gen2 VMSA-compatible IPMMU. - - - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU. - - "renesas,ipmmu-r8a7743" for the R8A7743 (RZ/G1M) IPMMU. - - "renesas,ipmmu-r8a7744" for the R8A7744 (RZ/G1N) IPMMU. - - "renesas,ipmmu-r8a7745" for the R8A7745 (RZ/G1E) IPMMU. - - "renesas,ipmmu-r8a774a1" for the R8A774A1 (RZ/G2M) IPMMU. - - "renesas,ipmmu-r8a774b1" for the R8A774B1 (RZ/G2N) IPMMU. - - "renesas,ipmmu-r8a774c0" for the R8A774C0 (RZ/G2E) IPMMU. - - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU. - - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU. - - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU. - - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU. - - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU. - - "renesas,ipmmu-r8a7796" for the R8A7796 (R-Car M3-W) IPMMU. - - "renesas,ipmmu-r8a77965" for the R8A77965 (R-Car M3-N) IPMMU. - - "renesas,ipmmu-r8a77970" for the R8A77970 (R-Car V3M) IPMMU. - - "renesas,ipmmu-r8a77980" for the R8A77980 (R-Car V3H) IPMMU. - - "renesas,ipmmu-r8a77990" for the R8A77990 (R-Car E3) IPMMU. - - "renesas,ipmmu-r8a77995" for the R8A77995 (R-Car D3) IPMMU. - - "renesas,ipmmu-vmsa" for generic R-Car Gen2 or RZ/G1 VMSA-compatible - IPMMU. - - - reg: Base address and size of the IPMMU registers. - - interrupts: Specifiers for the MMU fault interrupts. For instances that - support secure mode two interrupts must be specified, for non-secure and - secure mode, in that order. For instances that don't support secure mode a - single interrupt must be specified. Not required for cache IPMMUs. - - - #iommu-cells: Must be 1. - -Optional properties: - - - renesas,ipmmu-main: reference to the main IPMMU instance in two cells. - The first cell is a phandle to the main IPMMU and the second cell is - the interrupt bit number associated with the particular cache IPMMU device. - The interrupt bit number needs to match the main IPMMU IMSSTR register. - Only used by cache IPMMU instances. - - -Each bus master connected to an IPMMU must reference the IPMMU in its device -node with the following property: - - - iommus: A reference to the IPMMU in two cells. The first cell is a phandle - to the IPMMU and the second cell the number of the micro-TLB that the - device is connected to. - - -Example: R8A7791 IPMMU-MX and VSP1-D0 bus master - - ipmmu_mx: mmu@fe951000 { - compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa"; - reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - }; - - vsp@fe928000 { - ... - iommus = <&ipmmu_mx 13>; - ... - }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml new file mode 100644 index 000000000000..39675cf4ed71 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/renesas,ipmmu-vmsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas VMSA-Compatible IOMMU + +maintainers: + - Yoshihiro Shimoda + +description: + The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables. + It provides address translation for bus masters outside of the CPU, each + connected to the IPMMU through a port called micro-TLB. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,ipmmu-r8a73a4 # R-Mobile APE6 + - renesas,ipmmu-r8a7743 # RZ/G1M + - renesas,ipmmu-r8a7744 # RZ/G1N + - renesas,ipmmu-r8a7745 # RZ/G1E + - renesas,ipmmu-r8a7790 # R-Car H2 + - renesas,ipmmu-r8a7791 # R-Car M2-W + - renesas,ipmmu-r8a7793 # R-Car M2-N + - renesas,ipmmu-r8a7794 # R-Car E2 + - const: renesas,ipmmu-vmsa # R-Mobile APE6 or R-Car Gen2 or RZ/G1 + - items: + - enum: + - renesas,ipmmu-r8a774a1 # RZ/G2M + - renesas,ipmmu-r8a774b1 # RZ/G2N + - renesas,ipmmu-r8a774c0 # RZ/G2E + - renesas,ipmmu-r8a7795 # R-Car H3 + - renesas,ipmmu-r8a7796 # R-Car M3-W + - renesas,ipmmu-r8a77965 # R-Car M3-N + - renesas,ipmmu-r8a77970 # R-Car V3M + - renesas,ipmmu-r8a77980 # R-Car V3H + - renesas,ipmmu-r8a77990 # R-Car E3 + - renesas,ipmmu-r8a77995 # R-Car D3 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + description: + Specifiers for the MMU fault interrupts. Not required for cache IPMMUs. + items: + - description: non-secure mode + - description: secure mode if supported + + '#iommu-cells': + const: 1 + description: + The number of the micro-TLB that the device is connected to. + + power-domains: + maxItems: 1 + + renesas,ipmmu-main: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Reference to the main IPMMU phandle plus 1 cell. The cell is + the interrupt bit number associated with the particular cache IPMMU + device. The interrupt bit number needs to match the main IPMMU IMSSTR + register. Only used by cache IPMMU instances. + +required: + - compatible + - reg + - '#iommu-cells' + - power-domains + +oneOf: + - required: + - interrupts + - required: + - renesas,ipmmu-main + +additionalProperties: false + +examples: + - | + #include + #include + #include + + ipmmu_mx: iommu@fe951000 { + compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa"; + reg = <0xfe951000 0x1000>; + interrupts = , + ; + #iommu-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml index 0e33cd9e010e..af51b91c893e 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml @@ -54,13 +54,13 @@ properties: clock-names: oneOf: - items: - - const: sysmmu + - const: sysmmu - items: - - const: sysmmu - - const: master + - const: sysmmu + - const: master - items: - - const: aclk - - const: pclk + - const: aclk + - const: pclk "#iommu-cells": const: 0 diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt deleted file mode 100644 index d5f1a877ed3e..000000000000 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt +++ /dev/null @@ -1,25 +0,0 @@ -IPMI device - -Required properties: -- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt -- device_type: should be ipmi -- reg: Address and length of the register set for the device - -Optional properties: -- interrupts: The interrupt for the device. Without this the interface - is polled. -- reg-size - The size of the register. Defaults to 1 -- reg-spacing - The number of bytes between register starts. Defaults to 1 -- reg-shift - The amount to shift the registers to the right to get the data - into bit zero. - -Example: - -smic@fff3a000 { - compatible = "ipmi-smic"; - device_type = "ipmi"; - reg = <0xfff3a000 0x1000>; - interrupts = <0 24 4>; - reg-size = <4>; - reg-spacing = <4>; -}; diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml new file mode 100644 index 000000000000..f0bb157e9417 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IPMI device bindings + +description: IPMI device bindings + +maintainers: + - Corey Minyard + +properties: + compatible: + enum: + - ipmi-kcs + - ipmi-smic + - ipmi-bt + + device_type: + items: + - const: "ipmi" + + reg: + maxItems: 1 + + interrupts: + description: Interface is polled if this property is omitted. + maxItems: 1 + + reg-size: + description: The access width of the register in bytes. Defaults to 1. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 4, 8] + + reg-spacing: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of bytes between register starts. Defaults to 1. + + reg-shift: + description: | + The amount of bits to shift the register content to the right to get + the data into bit zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 56 + +required: + - compatible + - reg + +examples: + - | + smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; + }; diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 4c270fde4567..a2a541bca73c 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -41,8 +41,7 @@ properties: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 maximum: 8 @@ -67,8 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string enum: - on - off @@ -79,8 +77,8 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: # LED will act as a back-light, controlled by the framebuffer system - backlight @@ -111,8 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#definitions/uint32-matrix items: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml index 0e75b185dd19..7ad2baeda0b0 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -24,8 +24,7 @@ patternProperties: "(^led-[0-9a-f]$|led)": type: object - allOf: - - $ref: common.yaml# + $ref: common.yaml# properties: gpios: diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index 90edf9d33b33..86a37c92b834 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -34,11 +34,10 @@ patternProperties: #- $ref: "common.yaml#" rohm,led-compatible: description: LED identification string - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - bd71828-ambled - - bd71828-grnled + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - bd71828-ambled + - bd71828-grnled function: description: Purpose of LED as defined in dt-bindings/leds/common.h diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt deleted file mode 100644 index 31486c9f6443..000000000000 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt +++ /dev/null @@ -1,58 +0,0 @@ -NXP i.MX Messaging Unit (MU) --------------------------------------------------------------------- - -The Messaging Unit module enables two processors within the SoC to -communicate and coordinate by passing messages (e.g. data, status -and control) through the MU interface. The MU also provides the ability -for one processor to signal the other processor using interrupts. - -Because the MU manages the messaging between processors, the MU uses -different clocks (from each side of the different peripheral buses). -Therefore, the MU must synchronize the accesses from one side to the -other. The MU accomplishes synchronization using two sets of matching -registers (Processor A-facing, Processor B-facing). - -Messaging Unit Device Node: -============================= - -Required properties: -------------------- -- compatible : should be "fsl,-mu", the supported chips include - imx6sx, imx7s, imx8qxp, imx8qm. - The "fsl,imx6sx-mu" compatible is seen as generic and should - be included together with SoC specific compatible. - There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu" - compatible to support it. - To communicate with i.MX8 SCU, "fsl,imx8-mu-scu" could be - used for fast IPC -- reg : Should contain the registers location and length -- interrupts : Interrupt number. The interrupt specifier format depends - on the interrupt controller parent. -- #mbox-cells: Must be 2. - <&phandle type channel> - phandle : Label name of controller - type : Channel type - channel : Channel number - - This MU support 4 type of unidirectional channels, each type - has 4 channels. A total of 16 channels. Following types are - supported: - 0 - TX channel with 32bit transmit register and IRQ transmit - acknowledgment support. - 1 - RX channel with 32bit receive register and IRQ support - 2 - TX doorbell channel. Without own register and no ACK support. - 3 - RX doorbell channel. - -Optional properties: -------------------- -- clocks : phandle to the input clock. -- fsl,mu-side-b : Should be set for side B MU. - -Examples: --------- -lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu"; - reg = <0x0 0x5d1b0000 0x0 0x10000>; - interrupts = ; - #mbox-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml new file mode 100644 index 000000000000..3b35eb5ac3f9 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Messaging Unit (MU) + +maintainers: + - Dong Aisheng + +description: | + The Messaging Unit module enables two processors within the SoC to + communicate and coordinate by passing messages (e.g. data, status + and control) through the MU interface. The MU also provides the ability + for one processor to signal the other processor using interrupts. + + Because the MU manages the messaging between processors, the MU uses + different clocks (from each side of the different peripheral buses). + Therefore, the MU must synchronize the accesses from one side to the + other. The MU accomplishes synchronization using two sets of matching + registers (Processor A-facing, Processor B-facing). + +properties: + compatible: + oneOf: + - const: fsl,imx6sx-mu + - const: fsl,imx7ulp-mu + - const: fsl,imx8-mu-scu + - items: + - enum: + - fsl,imx7s-mu + - fsl,imx8mq-mu + - fsl,imx8mm-mu + - fsl,imx8mn-mu + - fsl,imx8mp-mu + - fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + - description: To communicate with i.MX8 SCU with fast IPC + items: + - const: fsl,imx8qxp-mu + - const: fsl,imx8-mu-scu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + description: | + <&phandle type channel> + phandle : Label name of controller + type : Channel type + channel : Channel number + + This MU support 4 type of unidirectional channels, each type + has 4 channels. A total of 16 channels. Following types are + supported: + 0 - TX channel with 32bit transmit register and IRQ transmit + acknowledgment support. + 1 - RX channel with 32bit receive register and IRQ support + 2 - TX doorbell channel. Without own register and no ACK support. + 3 - RX doorbell channel. + const: 2 + + clocks: + maxItems: 1 + + fsl,mu-side-b: + description: boolean, if present, means it is for side B MU. + type: boolean + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include + + mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index 5b13d6672996..3b7ab61a144f 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -24,7 +24,7 @@ properties: maxItems: 1 clocks: - maxItems: 1 + maxItems: 1 interrupts: items: @@ -49,9 +49,8 @@ properties: st,proc-id: description: Processor id using the mailbox (0 or 1) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] required: - compatible diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 8453ee340b9f..09318830db47 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -20,11 +20,11 @@ properties: - const: allwinner,sun4i-a10-csi1 - const: allwinner,sun7i-a20-csi0 - items: - - const: allwinner,sun7i-a20-csi1 - - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 - items: - - const: allwinner,sun8i-r40-csi0 - - const: allwinner,sun7i-a20-csi0 + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1 @@ -35,24 +35,24 @@ properties: clocks: oneOf: - items: - - description: The CSI interface clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI DRAM clock - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: oneOf: - items: - - const: bus - - const: ram + - const: bus + - const: ram - items: - - const: bus - - const: isp - - const: ram + - const: bus + - const: isp + - const: ram resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 37d77e065491..b902495d278b 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -29,14 +29,14 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,gxbb-vdec # GXBB (S905) - - amlogic,gxl-vdec # GXL (S905X, S905D) - - amlogic,gxm-vdec # GXM (S912) - - const: amlogic,gx-vdec + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec - enum: - - amlogic,g12a-vdec # G12A (S905X2, S905D2) - - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) interrupts: minItems: 2 @@ -77,13 +77,11 @@ properties: amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle amlogic,canvas: description: should point to a canvas provider node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if: diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index 95ffa8bc0533..d93aea6a0258 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -35,8 +35,7 @@ properties: hdmi-phandle: description: phandle to the HDMI controller - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if: @@ -88,7 +87,7 @@ examples: - | cec_AO: cec@100 { compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; + reg = <0x00100 0x14>; interrupts = <199>; clocks = <&clkc_cec>; clock-names = "core"; diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml index 32d6b693274f..dfc4d29a4f04 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -67,8 +67,7 @@ properties: otherwise it's continuous. link-frequencies: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-array + $ref: /schemas/types.yaml#/definitions/uint64-array description: Allowed data bus frequencies. diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt deleted file mode 100644 index 7ec2c8c8a3b9..000000000000 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt +++ /dev/null @@ -1,50 +0,0 @@ -Marvell MMP2 camera host interface - -Required properties: - - compatible: Should be "marvell,mmp2-ccic". - - reg: Register base and size. - - interrupts: The interrupt number. - - #clock-cells: Must be 0. - -Optional properties: - - clocks: Reference to the input clock as specified by - Documentation/devicetree/bindings/clock/clock-bindings.txt. - - clock-names: Names of the clocks used; "axi" for the AXI bus interface, - "func" for the peripheral clock and "phy" for the parallel - video bus interface. - - clock-output-names: Optional clock source for sensors. Shall be "mclk". - -Required subnodes: - - port: The parallel bus interface port with a single endpoint linked to - the sensor's endpoint as described in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -Required endpoint properties: - - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively - - pclk-sample: pixel clock polarity - - hsync-active: horizontal synchronization polarity (only required for - parallel bus) - - vsync-active: vertical synchronization polarity (only required for - parallel bus) - -Example: - - camera0: camera@d420a000 { - compatible = "marvell,mmp2-ccic"; - reg = <0xd420a000 0x800>; - interrupts = <42>; - clocks = <&soc_clocks MMP2_CLK_CCIC0>; - clock-names = "axi"; - #clock-cells = <0>; - clock-output-names = "mclk"; - - port { - camera0_0: endpoint { - remote-endpoint = <&ov7670_0>; - bus-type = <5>; /* Parallel */ - hsync-active = <1>; /* Active high */ - vsync-active = <1>; /* Active high */ - pclk-sample = <0>; /* Falling */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml new file mode 100644 index 000000000000..49bff738aca5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 camera host interface bindings + +maintainers: + - Lubomir Rintel + +properties: + $nodename: + pattern: '^camera@[a-f0-9]+$' + + compatible: + const: marvell,mmp2-ccic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + port: + type: object + additionalProperties: false + + properties: + endpoint: + type: object + additionalProperties: false + + # Properties described in + # Documentation/devicetree/bindings/media/video-interfaces.txt + properties: + remote-endpoint: true + hsync-active: true + vsync-active: true + pclk-sample: true + bus-type: true + + required: + - remote-endpoint + + required: + - endpoint + + clocks: + minItems: 1 + maxItems: 3 + items: + - description: AXI bus interface clock + - description: Peripheral clock + - description: Parallel video bus interface clock + + clock-names: + const: axi + + '#clock-cells': + const: 0 + + clock-output-names: + const: mclk + +required: + - compatible + - reg + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include + + camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <42>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + + port { + camera0_0: endpoint { + remote-endpoint = <&ov7670_0>; + bus-type = <5>; /* Parallel */ + hsync-active = <1>; /* Active high */ + vsync-active = <1>; /* Active high */ + pclk-sample = <0>; /* Falling */ + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 764affa4877e..55f2d67ae34e 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -115,7 +115,7 @@ examples: venus: video-codec@aa00000 { compatible = "qcom,sc7180-venus"; - reg = <0 0x0aa00000 0 0xff000>; + reg = <0x0aa00000 0xff000>; interrupts = ; power-domains = <&videocc VENUS_GDSC>, <&videocc VCODEC0_GDSC>; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 8552f4ab907e..157dff8057e9 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -110,7 +110,7 @@ examples: video-codec@aa00000 { compatible = "qcom,sdm845-venus-v2"; - reg = <0 0x0aa00000 0 0xff000>; + reg = <0x0aa00000 0xff000>; interrupts = ; clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, <&videocc VIDEO_CC_VENUS_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml index 05cabe4e893a..084e45e2df62 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -127,7 +127,7 @@ examples: video-codec@aa00000 { compatible = "qcom,sdm845-venus"; - reg = <0 0x0aa00000 0 0xff000>; + reg = <0x0aa00000 0xff000>; interrupts = ; clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, <&videocc VIDEO_CC_VENUS_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index b27c9385d490..ded2ac43237d 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -18,136 +18,135 @@ properties: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rc-adstech-dvb-t-pci - - rc-alink-dtu-m - - rc-anysee - - rc-apac-viewcomp - - rc-astrometa-t2hybrid - - rc-asus-pc39 - - rc-asus-ps3-100 - - rc-ati-tv-wonder-hd-600 - - rc-ati-x10 - - rc-avermedia - - rc-avermedia-a16d - - rc-avermedia-cardbus - - rc-avermedia-dvbt - - rc-avermedia-m135a - - rc-avermedia-m733a-rm-k6 - - rc-avermedia-rm-ks - - rc-avertv-303 - - rc-azurewave-ad-tu700 - - rc-beelink-gs1 - - rc-behold - - rc-behold-columbus - - rc-budget-ci-old - - rc-cec - - rc-cinergy - - rc-cinergy-1400 - - rc-d680-dmb - - rc-delock-61959 - - rc-dib0700-nec - - rc-dib0700-rc5 - - rc-digitalnow-tinytwin - - rc-digittrade - - rc-dm1105-nec - - rc-dntv-live-dvb-t - - rc-dntv-live-dvbt-pro - - rc-dtt200u - - rc-dvbsky - - rc-dvico-mce - - rc-dvico-portable - - rc-em-terratec - - rc-empty - - rc-encore-enltv - - rc-encore-enltv-fm53 - - rc-encore-enltv2 - - rc-evga-indtube - - rc-eztv - - rc-flydvb - - rc-flyvideo - - rc-fusionhdtv-mce - - rc-gadmei-rm008z - - rc-geekbox - - rc-genius-tvgo-a11mce - - rc-gotview7135 - - rc-hauppauge - - rc-hisi-poplar - - rc-hisi-tv-demo - - rc-imon-mce - - rc-imon-pad - - rc-imon-rsc - - rc-iodata-bctv7e - - rc-it913x-v1 - - rc-it913x-v2 - - rc-kaiomy - - rc-khadas - - rc-kworld-315u - - rc-kworld-pc150u - - rc-kworld-plus-tv-analog - - rc-leadtek-y04g0051 - - rc-lme2510 - - rc-manli - - rc-medion-x10 - - rc-medion-x10-digitainer - - rc-medion-x10-or2x - - rc-msi-digivox-ii - - rc-msi-digivox-iii - - rc-msi-tvanywhere - - rc-msi-tvanywhere-plus - - rc-nebula - - rc-nec-terratec-cinergy-xs - - rc-norwood - - rc-npgtech - - rc-odroid - - rc-pctv-sedna - - rc-pinnacle-color - - rc-pinnacle-grey - - rc-pinnacle-pctv-hd - - rc-pixelview - - rc-pixelview-002t - - rc-pixelview-mk12 - - rc-pixelview-new - - rc-powercolor-real-angel - - rc-proteus-2309 - - rc-purpletv - - rc-pv951 - - rc-rc5-tv - - rc-rc6-mce - - rc-real-audio-220-32-keys - - rc-reddo - - rc-snapstream-firefly - - rc-streamzap - - rc-su3000 - - rc-tango - - rc-tanix-tx3mini - - rc-tanix-tx5max - - rc-tbs-nec - - rc-technisat-ts35 - - rc-technisat-usb2 - - rc-terratec-cinergy-c-pci - - rc-terratec-cinergy-s2-hd - - rc-terratec-cinergy-xs - - rc-terratec-slim - - rc-terratec-slim-2 - - rc-tevii-nec - - rc-tivo - - rc-total-media-in-hand - - rc-total-media-in-hand-02 - - rc-trekstor - - rc-tt-1500 - - rc-twinhan-dtv-cab-ci - - rc-twinhan1027 - - rc-videomate-k100 - - rc-videomate-s350 - - rc-videomate-tv-pvr - - rc-videostrong-kii-pro - - rc-wetek-hub - - rc-wetek-play2 - - rc-winfast - - rc-winfast-usbii-deluxe - - rc-x96max - - rc-xbox-dvd - - rc-zx-irdec + $ref: '/schemas/types.yaml#/definitions/string' + enum: + - rc-adstech-dvb-t-pci + - rc-alink-dtu-m + - rc-anysee + - rc-apac-viewcomp + - rc-astrometa-t2hybrid + - rc-asus-pc39 + - rc-asus-ps3-100 + - rc-ati-tv-wonder-hd-600 + - rc-ati-x10 + - rc-avermedia + - rc-avermedia-a16d + - rc-avermedia-cardbus + - rc-avermedia-dvbt + - rc-avermedia-m135a + - rc-avermedia-m733a-rm-k6 + - rc-avermedia-rm-ks + - rc-avertv-303 + - rc-azurewave-ad-tu700 + - rc-beelink-gs1 + - rc-behold + - rc-behold-columbus + - rc-budget-ci-old + - rc-cec + - rc-cinergy + - rc-cinergy-1400 + - rc-d680-dmb + - rc-delock-61959 + - rc-dib0700-nec + - rc-dib0700-rc5 + - rc-digitalnow-tinytwin + - rc-digittrade + - rc-dm1105-nec + - rc-dntv-live-dvb-t + - rc-dntv-live-dvbt-pro + - rc-dtt200u + - rc-dvbsky + - rc-dvico-mce + - rc-dvico-portable + - rc-em-terratec + - rc-empty + - rc-encore-enltv + - rc-encore-enltv-fm53 + - rc-encore-enltv2 + - rc-evga-indtube + - rc-eztv + - rc-flydvb + - rc-flyvideo + - rc-fusionhdtv-mce + - rc-gadmei-rm008z + - rc-geekbox + - rc-genius-tvgo-a11mce + - rc-gotview7135 + - rc-hauppauge + - rc-hisi-poplar + - rc-hisi-tv-demo + - rc-imon-mce + - rc-imon-pad + - rc-imon-rsc + - rc-iodata-bctv7e + - rc-it913x-v1 + - rc-it913x-v2 + - rc-kaiomy + - rc-khadas + - rc-kworld-315u + - rc-kworld-pc150u + - rc-kworld-plus-tv-analog + - rc-leadtek-y04g0051 + - rc-lme2510 + - rc-manli + - rc-medion-x10 + - rc-medion-x10-digitainer + - rc-medion-x10-or2x + - rc-msi-digivox-ii + - rc-msi-digivox-iii + - rc-msi-tvanywhere + - rc-msi-tvanywhere-plus + - rc-nebula + - rc-nec-terratec-cinergy-xs + - rc-norwood + - rc-npgtech + - rc-odroid + - rc-pctv-sedna + - rc-pinnacle-color + - rc-pinnacle-grey + - rc-pinnacle-pctv-hd + - rc-pixelview + - rc-pixelview-002t + - rc-pixelview-mk12 + - rc-pixelview-new + - rc-powercolor-real-angel + - rc-proteus-2309 + - rc-purpletv + - rc-pv951 + - rc-rc5-tv + - rc-rc6-mce + - rc-real-audio-220-32-keys + - rc-reddo + - rc-snapstream-firefly + - rc-streamzap + - rc-su3000 + - rc-tango + - rc-tanix-tx3mini + - rc-tanix-tx5max + - rc-tbs-nec + - rc-technisat-ts35 + - rc-technisat-usb2 + - rc-terratec-cinergy-c-pci + - rc-terratec-cinergy-s2-hd + - rc-terratec-cinergy-xs + - rc-terratec-slim + - rc-terratec-slim-2 + - rc-tevii-nec + - rc-tivo + - rc-total-media-in-hand + - rc-total-media-in-hand-02 + - rc-trekstor + - rc-tt-1500 + - rc-twinhan-dtv-cab-ci + - rc-twinhan1027 + - rc-videomate-k100 + - rc-videomate-s350 + - rc-videomate-tv-pvr + - rc-videostrong-kii-pro + - rc-wetek-hub + - rc-wetek-play2 + - rc-winfast + - rc-winfast-usbii-deluxe + - rc-x96max + - rc-xbox-dvd + - rc-zx-irdec diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml index fcb5f13704a5..c7e1e4fe67e6 100644 --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml @@ -27,28 +27,34 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + port: type: object additionalProperties: false properties: - endpoint: - type: object - additionalProperties: false + endpoint: + type: object + additionalProperties: false # Properties described in # Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - remote-endpoint: true - hsync-active: true - vsync-active: true - field-even-active: false - bus-width: - enum: [8, 16] - default: 8 + properties: + remote-endpoint: true + hsync-active: true + vsync-active: true + field-even-active: false + bus-width: + enum: [8, 16] + default: 8 - required: - - remote-endpoint + required: + - remote-endpoint required: - endpoint @@ -57,6 +63,8 @@ required: - compatible - reg - interrupts + - clocks + - power-domains - port additionalProperties: false @@ -64,11 +72,14 @@ additionalProperties: false examples: - | #include + #include ceu: ceu@e8210000 { reg = <0xe8210000 0x209c>; compatible = "renesas,r7s72100-ceu"; interrupts = ; + clocks = <&mstp6_clks R7S72100_CLK_CEU>; + power-domains = <&cpg_clocks>; port { ceu_in: endpoint { diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index 408442a0c389..c9e068231d4b 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -135,7 +135,7 @@ examples: csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; - reg = <0 0xfea80000 0 0x10000>; + reg = <0xfea80000 0x10000>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 714>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 1ec947b4781f..53c0a7238bac 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -116,10 +116,9 @@ properties: #The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 ports: type: object @@ -261,13 +260,13 @@ properties: anyOf: - required: - - endpoint@0 + - endpoint@0 - required: - - endpoint@1 + - endpoint@1 - required: - - endpoint@2 + - endpoint@2 - required: - - endpoint@3 + - endpoint@3 additionalProperties: false @@ -307,7 +306,7 @@ examples: vin1: vin@e6ef1000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; + reg = <0xe6ef1000 0x1000>; interrupts = ; clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -329,7 +328,7 @@ examples: vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7795"; - reg = <0 0xe6ef0000 0 0x1000>; + reg = <0xe6ef0000 0x1000>; interrupts = ; clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -366,7 +365,7 @@ examples: vin2: video@e6ef2000 { compatible = "renesas,vin-r8a77970"; - reg = <0 0xe6ef2000 0 0x1000>; + reg = <0xe6ef2000 0x1000>; interrupts = ; clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml index f3a8a350e85f..ef473f287399 100644 --- a/Documentation/devicetree/bindings/media/ti,vpe.yaml +++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml @@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,dra7-vpe + const: ti,dra7-vpe reg: items: diff --git a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml new file mode 100644 index 000000000000..1fca282f64a2 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 L2-cache Control Block + +maintainers: + - Serge Semin + +description: | + By means of the System Controller Baikal-T1 SoC exposes a few settings to + tune the MIPS P5600 CM2 L2 cache performance up. In particular it's possible + to change the Tag, Data and Way-select RAM access latencies. Baikal-T1 + L2-cache controller block is responsible for the tuning. Its DT node is + supposed to be a child of the system controller. + +properties: + compatible: + const: baikal,bt1-l2-ctl + + reg: + maxItems: 1 + + baikal,l2-ws-latency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cycles of latency for Way-select RAM accesses + default: 0 + minimum: 0 + maximum: 3 + + baikal,l2-tag-latency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cycles of latency for Tag RAM accesses + default: 0 + minimum: 0 + maximum: 3 + + baikal,l2-data-latency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cycles of latency for Data RAM accesses + default: 1 + minimum: 0 + maximum: 3 + +additionalProperties: false + +required: + - compatible + +examples: + - | + l2@1f04d028 { + compatible = "baikal,bt1-l2-ctl"; + reg = <0x1f04d028 0x004>; + + baikal,l2-ws-latency = <1>; + baikal,l2-tag-latency = <1>; + baikal,l2-data-latency = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt deleted file mode 100644 index 049675944b78..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt +++ /dev/null @@ -1,16 +0,0 @@ -Calxeda DDR memory controller - -Properties: -- compatible : Should be: - - "calxeda,hb-ddr-ctrl" for ECX-1000 - - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000 -- reg : Address and size for DDR controller registers. -- interrupts : Interrupt for DDR controller. - -Example: - - memory-controller@fff00000 { - compatible = "calxeda,hb-ddr-ctrl"; - reg = <0xfff00000 0x1000>; - interrupts = <0 91 4>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml new file mode 100644 index 000000000000..96d563fd61f5 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda DDR memory controller binding + +description: | + The Calxeda DDR memory controller is initialised and programmed by the + firmware, but an OS might want to read its registers for error reporting + purposes and to learn about the DRAM topology. + +maintainers: + - Andre Przywara + +properties: + compatible: + enum: + - calxeda,hb-ddr-ctrl + - calxeda,ecx-2000-ddr-ctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index cdfe3f7f0ea9..637e24f0f73b 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -51,9 +51,7 @@ patternProperties: maxItems: 1 reg-io-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2] + enum: [1, 2] description: Data width in bytes (1 or 2). If omitted, default of 1 is used. @@ -64,11 +62,10 @@ patternProperties: type: boolean samsung,srom-timing: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 6 - maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml index c9e6c22cb5be..445e46feda69 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml @@ -25,9 +25,9 @@ properties: compatible: items: - enum: - - fsl,imx8mn-ddrc - - fsl,imx8mm-ddrc - - fsl,imx8mq-ddrc + - fsl,imx8mn-ddrc + - fsl,imx8mm-ddrc + - fsl,imx8mq-ddrc - const: fsl,imx8m-ddrc reg: diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt deleted file mode 100644 index 59b8dcc118ee..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt +++ /dev/null @@ -1,76 +0,0 @@ -* Ingenic JZ4780 NAND/external memory controller (NEMC) - -This file documents the device tree bindings for the NEMC external memory -controller in Ingenic JZ4780 - -Required properties: -- compatible: Should be set to one of: - "ingenic,jz4740-nemc" (JZ4740) - "ingenic,jz4780-nemc" (JZ4780) -- reg: Should specify the NEMC controller registers location and length. -- clocks: Clock for the NEMC controller. -- #address-cells: Must be set to 2. -- #size-cells: Must be set to 1. -- ranges: A set of ranges for each bank describing the physical memory layout. - Each should specify the following 4 integer values: - - 0 - -Each child of the NEMC node describes a device connected to the NEMC. - -Required child node properties: -- reg: Should contain at least one register specifier, given in the following - format: - - - - Multiple registers can be specified across multiple banks. This is needed, - for example, for packaged NAND devices with multiple dies. Such devices - should be grouped into a single node. - -Optional child node properties: -- ingenic,nemc-bus-width: Specifies the bus width in bits. Defaults to 8 bits. -- ingenic,nemc-tAS: Address setup time in nanoseconds. -- ingenic,nemc-tAH: Address hold time in nanoseconds. -- ingenic,nemc-tBP: Burst pitch time in nanoseconds. -- ingenic,nemc-tAW: Access wait time in nanoseconds. -- ingenic,nemc-tSTRV: Static memory recovery time in nanoseconds. - -If a child node references multiple banks in its "reg" property, the same value -for all optional parameters will be configured for all banks. If any optional -parameters are omitted, they will be left unchanged from whatever they are -configured to when the NEMC device is probed (which may be the reset value as -given in the hardware reference manual, or a value configured by the boot -loader). - -Example (NEMC node with a NAND child device attached at CS1): - -nemc: nemc@13410000 { - compatible = "ingenic,jz4780-nemc"; - reg = <0x13410000 0x10000>; - - #address-cells = <2>; - #size-cells = <1>; - - ranges = <1 0 0x1b000000 0x1000000 - 2 0 0x1a000000 0x1000000 - 3 0 0x19000000 0x1000000 - 4 0 0x18000000 0x1000000 - 5 0 0x17000000 0x1000000 - 6 0 0x16000000 0x1000000>; - - clocks = <&cgu JZ4780_CLK_NEMC>; - - nand: nand@1 { - compatible = "ingenic,jz4780-nand"; - reg = <1 0 0x1000000>; - - ingenic,nemc-tAS = <10>; - ingenic,nemc-tAH = <5>; - ingenic,nemc-tBP = <10>; - ingenic,nemc-tAW = <15>; - ingenic,nemc-tSTRV = <100>; - - ... - }; -}; diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml new file mode 100644 index 000000000000..9b478da0c479 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + $nodename: + pattern: "^memory-controller@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4740-nemc + - ingenic,jz4780-nemc + - items: + - const: ingenic,jz4725b-nemc + - const: ingenic,jz4740-nemc + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + ranges: true + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +patternProperties: + ".*@[0-9]+$": + type: object + properties: + reg: + minItems: 1 + maxItems: 255 + + ingenic,nemc-bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [8, 16] + description: Specifies the bus width in bits. + + ingenic,nemc-tAS: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Address setup time in nanoseconds. + + ingenic,nemc-tAH: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Address hold time in nanoseconds. + + ingenic,nemc-tBP: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Burst pitch time in nanoseconds. + + ingenic,nemc-tAW: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Address wait time in nanoseconds. + + ingenic,nemc-tSTRV: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Static memory recovery time in nanoseconds. + + required: + - reg + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include + #include + nemc: memory-controller@13410000 { + compatible = "ingenic,jz4780-nemc"; + reg = <0x13410000 0x10000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0x1b000000 0x1000000>, + <2 0 0x1a000000 0x1000000>, + <3 0 0x19000000 0x1000000>, + <4 0 0x18000000 0x1000000>, + <5 0 0x17000000 0x1000000>, + <6 0 0x16000000 0x1000000>; + + clocks = <&cgu JZ4780_CLK_NEMC>; + + ethernet@6 { + compatible = "davicom,dm9000"; + davicom,no-eeprom; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs6>; + + reg = <6 0 1>, /* addr */ + <6 2 1>; /* data */ + + ingenic,nemc-tAS = <15>; + ingenic,nemc-tAH = <10>; + ingenic,nemc-tBP = <20>; + ingenic,nemc-tAW = <50>; + ingenic,nemc-tSTRV = <100>; + + reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>; + vcc-supply = <ð0_power>; + + interrupt-parent = <&gpe>; + interrupts = <19 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index 3e0a8a92d652..278549f9e051 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -73,10 +73,9 @@ patternProperties: timings nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: pad calibration interval in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151 @@ -136,11 +135,10 @@ patternProperties: value of the EMC_XM2DQSPADCTRL2 register for this set of timings nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: number of EMC clocks to wait before issuing any commands after clock change + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023 @@ -150,12 +148,11 @@ patternProperties: value of the EMC_ZCAL_INTERVAL register for this set of timings nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC @@ -340,7 +337,7 @@ examples: mc: memory-controller@70019000 { compatible = "nvidia,tegra124-mc"; - reg = <0x0 0x70019000 0x0 0x1000>; + reg = <0x70019000 0x1000>; clocks = <&tegra_car TEGRA124_CLK_MC>; clock-names = "mc"; @@ -352,7 +349,7 @@ examples: external-memory-controller@7001b000 { compatible = "nvidia,tegra124-emc"; - reg = <0x0 0x7001b000 0x0 0x1000>; + reg = <0x7001b000 0x1000>; clocks = <&car TEGRA124_CLK_EMC>; clock-names = "emc"; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml index 22a94b6fdbde..84d0339505b1 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -60,8 +60,7 @@ patternProperties: maximum: 1066000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM. @@ -112,7 +111,7 @@ examples: - | memory-controller@70019000 { compatible = "nvidia,tegra124-mc"; - reg = <0x0 0x70019000 0x0 0x1000>; + reg = <0x70019000 0x1000>; clocks = <&tegra_car 32>; clock-names = "mc"; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml new file mode 100644 index 000000000000..49ab09252e52 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra210-emc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 SoC External Memory Controller + +maintainers: + - Thierry Reding + - Jon Hunter + +description: | + The EMC interfaces with the off-chip SDRAM to service the request stream + sent from the memory controller. + +properties: + compatible: + const: nvidia,tegra210-emc + + reg: + maxItems: 3 + + clocks: + items: + - description: external memory clock + + clock-names: + items: + - const: emc + + interrupts: + items: + - description: EMC general interrupt + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to a reserved memory region describing the table of EMC + frequencies trained by the firmware + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the memory controller node + +required: + - compatible + - reg + - clocks + - clock-names + - nvidia,memory-controller + +additionalProperties: false + +examples: + - | + #include + #include + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + emc_table: emc-table@83400000 { + compatible = "nvidia,tegra210-emc-table"; + reg = <0x83400000 0x10000>; + }; + }; + + external-memory-controller@7001b000 { + compatible = "nvidia,tegra210-emc"; + reg = <0x7001b000 0x1000>, + <0x7001e000 0x1000>, + <0x7001f000 0x1000>; + clocks = <&tegra_car TEGRA210_CLK_EMC>; + clock-names = "emc"; + interrupts = ; + memory-region = <&emc_table>; + nvidia,memory-controller = <&mc>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml index e4135bac6957..112bae2fcbbd 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -56,10 +56,9 @@ patternProperties: maximum: 900000000 nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151 @@ -79,11 +78,10 @@ patternProperties: Mode Register 0. nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023 @@ -98,12 +96,11 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled. nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml index 4b9196c83291..84fd57bcf0dc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml @@ -77,8 +77,7 @@ patternProperties: maximum: 900000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt deleted file mode 100644 index 9f78e6c82740..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.txt +++ /dev/null @@ -1,44 +0,0 @@ -DT bindings for Renesas R-Mobile and SH-Mobile memory controllers -================================================================= - -Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers. -These memory controllers differ from one SoC variant to another, and are called -by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller -(DBSC3)", "SDRAM Bus State Controller (SBSC)"). - -Currently memory controller device nodes are used only to reference PM -domains, and prevent these PM domains from being powered down, which would -crash the system. - -As there exist no actual drivers for these controllers yet, these bindings -should be considered EXPERIMENTAL for now. - -Required properties: - - compatible: Must be one of the following SoC-specific values: - - "renesas,dbsc-r8a73a4" (R-Mobile APE6) - - "renesas,dbsc3-r8a7740" (R-Mobile A1) - - "renesas,sbsc-sh73a0" (SH-Mobile AG5) - - reg: Must contain the base address and length of the memory controller's - registers. - -Optional properties: - - interrupts: Must contain a list of interrupt specifiers for memory - controller interrupts, if available. - - interrupt-names: Must contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Valid interrupt names are: - - "sec" (secure interrupt) - - "temp" (normal (temperature) interrupt) - - power-domains: Must contain a reference to the PM domain that the memory - controller belongs to, if available. - -Example: - - sbsc1: memory-controller@fe400000 { - compatible = "renesas,sbsc-sh73a0"; - reg = <0xfe400000 0x400>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "sec", "temp"; - power-domains = <&pd_a4bc0>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml new file mode 100644 index 000000000000..7056ccb7eb30 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas DDR Bus Controllers + +maintainers: + - Geert Uytterhoeven + +description: | + Renesas SoCs contain one or more memory controllers. These memory + controllers differ from one SoC variant to another, and are called by + different names, e.g. "DDR Bus Controller (DBSC)", "DDR3 Bus State Controller + (DBSC3)", or "SDRAM Bus State Controller (SBSC)"). + +properties: + compatible: + enum: + - renesas,dbsc-r8a73a4 # R-Mobile APE6 + - renesas,dbsc3-r8a7740 # R-Mobile A1 + - renesas,sbsc-sh73a0 # SH-Mobile AG5 + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: sec # secure interrupt + - const: temp # normal (temperature) interrupt + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - power-domains + +additionalProperties: false + +examples: + - | + #include + sbsc1: memory-controller@fe400000 { + compatible = "renesas,sbsc-sh73a0"; + reg = <0xfe400000 0x400>; + interrupts = , + ; + interrupt-names = "sec", "temp"; + power-domains = <&pd_a4bc0>; + }; diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 39afacc447b2..f591332fc462 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller allwinner,tp-sensitive-adjust: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection allwinner,filter-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + description: | Select median and averaging filter. Sample used for median / averaging filter: diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt deleted file mode 100644 index 148ef621a5e5..000000000000 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ /dev/null @@ -1,101 +0,0 @@ -Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -Required properties: - - - compatible : One of the following chip-specific strings: - "cirrus,cs47l24" - "wlf,wm5102" - "wlf,wm5110" - "wlf,wm8280" - "wlf,wm8997" - "wlf,wm8998" - "wlf,wm1814" - "wlf,wm1831" - - - reg : I2C slave address when connected using I2C, chip select number when - using SPI. - - - interrupts : The interrupt line the /IRQ signal for the device is - connected to. - - interrupt-controller : Arizona class devices contain interrupt controllers - and may provide interrupt services to other devices. - - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - - gpio-controller : Indicates this device is a GPIO controller. - - #gpio-cells : Must be 2. The first cell is the pin number and the - second cell is used to specify optional parameters, see ../gpio/gpio.txt - for details. - - - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt - - - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102, - wm5110, wm8280, wm8998, wm1814) - - - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102, - wm5110, wm8280, wm8998, wm1814) - - - SPKVDD-supply : Speaker driver power supply (wm8997) - - - DCVDD-supply : Main power supply (cs47l24, wm1831) - - - MICVDD-supply : Microphone power supply (cs47l24, wm1831) - -Optional properties: - - - reset-gpios : GPIO specifier for the GPIO controlling /RESET - - - clocks: Should reference the clocks supplied on MCLK1 and MCLK2 - - clock-names: Should contains two strings: - "mclk1" for the clock supplied on MCLK1, recommended to be a high - quality audio reference clock - "mclk2" for the clock supplied on MCLK2, recommended to be an always on - 32k clock - - - wlf,gpio-defaults : A list of GPIO configuration register values. Defines - for the appropriate values can found in . If - absent, no configuration of these registers is performed. If any entry has - a value that is out of range for a 16 bit register then the chip default - will be used. If present exactly five values must be specified. - - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if - they are being externally supplied. As covered in - Documentation/devicetree/bindings/regulator/regulator.txt - (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814) - -Deprecated properties: - - - wlf,reset : GPIO specifier for the GPIO controlling /RESET - -Also see child specific device properties: - Regulator - ../regulator/arizona-regulator.txt - Extcon - ../extcon/extcon-arizona.txt - Sound - ../sound/wlf,arizona.txt - -Example: - -codec: wm5102@1a { - compatible = "wlf,wm5102"; - reg = <0x1a>; - interrupts = <347>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - - gpio-controller; - #gpio-cells = <2>; - - wlf,gpio-defaults = < - ARIZONA_GP_FN_TXLRCLK - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - >; -}; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt deleted file mode 100644 index 3bf92ad37fa1..000000000000 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt +++ /dev/null @@ -1,85 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -Also see these documents for generic binding information: - [1] GPIO : ../gpio/gpio.txt - -And these for relevant defines: - [2] include/dt-bindings/pinctrl/lochnagar.h - [3] include/dt-bindings/clock/lochnagar.h - -And these documents for the required sub-node binding details: - [4] Clock: ../clock/cirrus,lochnagar.txt - [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt - [6] Regulator: ../regulator/cirrus,lochnagar.txt - [7] Sound: ../sound/cirrus,lochnagar.txt - [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar1" - "cirrus,lochnagar2" - - - reg : I2C slave address - - - reset-gpios : Reset line to the Lochnagar, see [1]. - -Required sub-nodes: - - - lochnagar-clk : Binding for the clocking components, see [4]. - - - lochnagar-pinctrl : Binding for the pin control components, see [5]. - -Optional sub-nodes: - - - Bindings for the regulator components, see [6]. Only available on - Lochnagar 2. - - - lochnagar-sc : Binding for the sound card components, see [7]. - Only available on Lochnagar 2. - - lochnagar-hwmon : Binding for the hardware monitor components, see [8]. - Only available on Lochnagar 2. - -Optional properties: - - - present-gpios : Host present line, indicating the presence of a - host system, see [1]. This can be omitted if the present line is - tied in hardware. - -Example: - -lochnagar: lochnagar@22 { - compatible = "cirrus,lochnagar2"; - reg = <0x22>; - - reset-gpios = <&gpio0 55 0>; - present-gpios = <&gpio0 60 0>; - - lochnagar-clk { - compatible = "cirrus,lochnagar2-clk"; - ... - }; - - lochnagar-pinctrl { - compatible = "cirrus,lochnagar-pinctrl"; - ... - }; - - lochnagar-sc { - compatible = "cirrus,lochnagar2-soundcard"; - ... - }; - - lochnagar-hwmon { - compatible = "cirrus,lochnagar2-hwmon"; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..7a616577ac63 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -0,0 +1,352 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of + various application processor systems to provide a full evaluation + platform. Audio system topology, clocking and power can all be + controlled through the Lochnagar, allowing the device under test + to be used in a variety of possible use cases. + + Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + + And these for relevant defines: + [2] include/dt-bindings/pinctrl/lochnagar.h + [3] include/dt-bindings/clock/lochnagar.h + + And these documents for the required sub-node binding details: + [4] Clock: ../clock/cirrus,lochnagar.yaml + [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml + [6] Sound: ../sound/cirrus,lochnagar.yaml + [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml + +allOf: + - if: + properties: + compatible: + enum: + - cirrus,lochnagar2 + then: + properties: + lochnagar-hwmon: + type: object + $ref: /schemas/hwmon/cirrus,lochnagar.yaml# + + lochnagar-sc: + type: object + $ref: /schemas/sound/cirrus,lochnagar.yaml# + +properties: + compatible: + enum: + - cirrus,lochnagar1 + - cirrus,lochnagar2 + + reg: + const: 0x22 + + reset-gpios: + maxItems: 1 + + present-gpios: + description: | + Host present line, indicating the presence of a + host system, see [1]. This can be omitted if the present line is + tied in hardware. + maxItems: 1 + + lochnagar-clk: + type: object + $ref: /schemas/clock/cirrus,lochnagar.yaml# + + lochnagar-pmic32k: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 32768 + + lochnagar-clk12m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 12288000 + + lochnagar-clk11m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 11298600 + + lochnagar-clk24m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 24576000 + + lochnagar-clk22m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 22579200 + + lochnagar-clk8m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 8192000 + + lochnagar-usb24m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 24576000 + + lochnagar-usb12m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 12288000 + + lochnagar-pinctrl: + type: object + $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# + + VDDCORE: + description: + Initialisation data for the VDDCORE regulator, which supplies the + CODECs digital core if not being provided by an internal regulator. + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + enum: + - cirrus,lochnagar2-vddcore + + SYSVDD-supply: + description: + Primary power supply for the Lochnagar. + required: + - compatible + + MICVDD: + description: + Initialisation data for the MICVDD regulator, which supplies the + CODECs MICVDD. + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + enum: + - cirrus,lochnagar2-micvdd + + SYSVDD-supply: + description: + Primary power supply for the Lochnagar. + required: + - compatible + + MIC1VDD: + description: + Initialisation data for the MIC1VDD supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + enum: + - cirrus,lochnagar2-mic1vdd + + cirrus,micbias-input: + description: + A property selecting which of the CODEC minicard micbias outputs + should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + MICBIAS1-supply: + description: + Regulator supplies for the MIC1VDD outputs, supplying the digital + microphones, normally supplied from the attached CODEC. + required: + - compatible + + MIC2VDD: + description: + Initialisation data for the MIC2VDD supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + enum: + - cirrus,lochnagar2-mic2vdd + + cirrus,micbias-input: + description: + A property selecting which of the CODEC minicard micbias outputs + should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + MICBIAS2-supply: + description: + Regulator supplies for the MIC2VDD outputs, supplying the digital + microphones, normally supplied from the attached CODEC. + required: + - compatible + + VDD1V8: + description: + Recommended fixed regulator for the VDD1V8 regulator, which supplies + the CODECs analog and 1.8V digital supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + compatible: + enum: + - regulator-fixed + + regulator-min-microvolt: + const: 1800000 + + regulator-max-microvolt: + const: 1800000 + + vin-supply: + description: + Should be set to same supply as SYSVDD + required: + - compatible + - regulator-min-microvolt + - regulator-max-microvolt + - regulator-boot-on + - regulator-always-on + - vin-supply + +required: + - compatible + - reg + - reset-gpios + - lochnagar-clk + - lochnagar-pinctrl + +unevaluatedProperties: false + +examples: + - | + #include + #include + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + lochnagar: lochnagar@22 { + compatible = "cirrus,lochnagar2"; + reg = <0x22>; + + reset-gpios = <&gpio0 55 0>; + present-gpios = <&gpio0 60 0>; + + lochnagarclk: lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + + #clock-cells = <1>; + clocks = <&clkaudio>, <&clkpmic>; + clock-names = "ln-gf-mclk2", "ln-pmic-32k"; + + assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>, + <&lochnagarclk LOCHNAGAR_CDC_MCLK2>; + assigned-clock-parents = <&clkaudio>, <&clkpmic>; + }; + + clkpmic: lochnagar-pmic32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + lochnagar-pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + ap2aif-pins { + input-enable; + groups = "gf-aif1"; + function = "codec-aif3"; + }; + codec2aif-pins { + output-enable; + groups = "codec-aif3"; + function = "gf-aif1"; + }; + }; + }; + + lochnagar-sc { + compatible = "cirrus,lochnagar2-soundcard"; + + #sound-dai-cells = <1>; + + clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>; + clock-names = "mclk"; + }; + + lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; + }; + + MIC1VDD { + compatible = "cirrus,lochnagar2-mic1vdd"; + + cirrus,micbias-input = <3>; + }; + + MICVDD { + compatible = "cirrus,lochnagar2-micvdd"; + + SYSVDD-supply = <&wallvdd>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDD1V8 { + compatible = "regulator-fixed"; + + regulator-name = "VDD1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + + vin-supply = <&wallvdd>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml new file mode 100644 index 000000000000..a5531f6caf12 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Madera class audio CODECs Multi-Functional Device + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a range + of analogue I/O. + + See also the child driver bindings in: + + bindings/pinctrl/cirrus,madera.yaml + bindings/regulator/wlf,arizona.yaml + bindings/sound/cirrus,madera.yaml + +allOf: + - $ref: /schemas/pinctrl/cirrus,madera.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/sound/cirrus,madera.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - wlf,wm1840 + then: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + + SPKVDDR-supply: + description: + Right speaker driver power supply. + + required: + - SPKVDDL-supply + - SPKVDDR-supply + else: + required: + - DCVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + + required: + - SPKVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + + DBVDD4-supply: + description: + Databus power supply. + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + then: + required: + - MICVDD-supply + else: + properties: + CPVDD2-supply: + description: + Secondary charge pump power supply. + + required: + - CPVDD2-supply + +properties: + compatible: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - cirrus,cs42l92 + - cirrus,cs47l92 + - cirrus,cs47l93 + - cirrus,wm1840 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. The second cell is reserved for + future use and must be zero + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + description: + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + bindings/interrupt-controller/interrupts.txt + const: 2 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + One entry specifying the GPIO controlling /RESET. As defined in + bindings/gpio.txt. Although optional, it is strongly recommended + to use a hardware reset. + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3. + minItems: 1 + maxItems: 3 + + clock-names: + description: | + May contain up to three strings: + "mclk1" For the clock supplied on MCLK1, recommended to be a + high quality audio reference clock. + "mclk2" For the clock supplied on MCLK2, required to be an + always on 32k clock. + "mclk3" For the clock supplied on MCLK3. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - items: + - const: mclk1 + - const: mclk3 + - items: + - const: mclk2 + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - const: mclk3 + + AVDD-supply: + description: + Analogue power supply. + + DBVDD1-supply: + description: + Databus power supply. + + CPVDD1-supply: + description: + Charge pump power supply. + + DCVDD-supply: + description: + Digital power supply, optional on CS47L85, WM1840 where it can + be supplied internally. + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + +required: + - compatible + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupt-parent + - interrupts + - AVDD-supply + - DBVDD1-supply + - CPVDD1-supply + +unevaluatedProperties: false + +examples: + - | + #include + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + cs47l85: codec@1a { + compatible = "cirrus,cs47l85"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <&host_irq1>; + interrupt-parent = <&gic>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + DBVDD4-supply = <&vdd1v8>; + CPVDD1-supply = <&vdd1v8>; + CPVDD2-supply = <&vdd1v2>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + clocks = <&clks 0>, <&clks 1>, <&clks 2>; + clock-names = "mclk1", "mclk2", "mclk3"; + + cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>; + cirrus,inmode = < + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_DIFF MADERA_INMODE_DIFF + >; + cirrus,max-channels-clocked = <2 0 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + aif1-pins { + groups = "aif1"; + function = "aif1"; + bias-bus-hold; + }; + + aif2-pins { + groups = "aif2"; + function = "aif2"; + bias-bus-hold; + }; + + aif3-pins { + groups = "aif3"; + function = "aif3"; + bias-bus-hold; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt deleted file mode 100644 index 47e2b8bc6051..000000000000 --- a/Documentation/devicetree/bindings/mfd/madera.txt +++ /dev/null @@ -1,114 +0,0 @@ -Cirrus Logic Madera class audio codecs Multi-Functional Device - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -See also the child driver bindings in: -bindings/pinctrl/cirrus,madera-pinctrl.txt -bindings/regulator/arizona-regulator.txt -bindings/sound/madera.txt - -Required properties: - - - compatible : One of the following chip-specific strings: - "cirrus,cs47l15" - "cirrus,cs47l35" - "cirrus,cs47l85" - "cirrus,cs47l90" - "cirrus,cs47l91" - "cirrus,cs42l92" - "cirrus,cs47l92" - "cirrus,cs47l93" - "cirrus,wm1840" - - - reg : I2C slave address when connected using I2C, chip select number when - using SPI. - - - DCVDD-supply : Power supply for the device as defined in - bindings/regulator/regulator.txt - Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93 - Optional on CS47L85, WM1840 - - - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply : - Power supplies for the device - - - DBVDD3-supply, DBVDD4-supply : Power supplies for the device - (CS47L85, CS47L90, CS47L91, WM1840) - - - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device - (CS47L85, WM1840) - - - SPKVDD-supply : Power supply for the device - (CS47L15, CS47L35) - - - interrupt-controller : Indicates that this device is an interrupt controller - - - #interrupt-cells: the number of cells to describe an IRQ, must be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - bindings/interrupt-controller/interrupts.txt - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Must be 2. The first cell is the pin number. The second cell - is reserved for future use and must be zero - - - interrupt-parent : The parent interrupt controller. - - - interrupts : The interrupt line the /IRQ signal for the device is - connected to. - -Optional properties: - - - MICVDD-supply : Power supply, only need to be specified if - powered externally - - - reset-gpios : One entry specifying the GPIO controlling /RESET. - As defined in bindings/gpio.txt. - Although optional, it is strongly recommended to use a hardware reset - - - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3 - - clock-names: May contain up to three strings: - "mclk1" for the clock supplied on MCLK1, recommended to be a high - quality audio reference clock - "mclk2" for the clock supplied on MCLK2, required to be an always on - 32k clock - "mclk3" for the clock supplied on MCLK3 - - - MICBIASx : Initial data for the MICBIAS regulators, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt. - One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...) - (all codecs) - - One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...) - (all except CS47L85, WM1840) - - The following following additional property is supported for the generator - nodes: - - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling - capacitors attached. - -Optional child nodes: - micvdd : Node containing initialization data for the micvdd regulator - See bindings/regulator/arizona-regulator.txt - - ldo1 : Node containing initialization data for the LDO1 regulator - See bindings/regulator/arizona-regulator.txt - (cs47l85, wm1840) - -Example: - -cs47l85@0 { - compatible = "cirrus,cs47l85"; - reg = <0>; - - reset-gpios = <&gpio 0>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <&host_irq1>; - interrupt-parent = <&gic>; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index ddf190cb800b..e675611f80d0 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -66,8 +66,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 2 + minimum: 0 + maximum: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 590849ee9f32..f212fc6e1661 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,23 +67,22 @@ properties: description: One or two to describe break input configurations. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "index" indicates on which break input (0 or 1) the - configuration should be applied. - enum: [ 0 , 1] - - description: | - "level" gives the active level (0=low or 1=high) of the - input signal for this configuration - enum: [ 0, 1 ] - - description: | - "filter" gives the filtering value (up to 15) to be applied. - maximum: 15 - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 required: - "#pwm-cells" @@ -102,8 +101,8 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 16 + minimum: 0 + maximum: 16 required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index be7faa6dc055..dd995d7dc1a6 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -29,8 +29,7 @@ properties: onkey: type: object - allOf: - - $ref: ../input/input.yaml + $ref: ../input/input.yaml properties: compatible: @@ -68,8 +67,7 @@ properties: watchdog: type: object - allOf: - - $ref: ../watchdog/watchdog.yaml + $ref: ../watchdog/watchdog.yaml properties: compatible: @@ -190,8 +188,7 @@ properties: description: STPMIC1 voltage regulators supplies "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - allOf: - - $ref: ../regulator/regulator.yaml + $ref: ../regulator/regulator.yaml "^ldo[1-2,5-6]$": type: object diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 39375e4313d2..19bdaf781853 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -33,13 +33,13 @@ properties: compatible: anyOf: - items: - - enum: - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller - - const: syscon + - const: syscon - contains: const: syscon @@ -52,9 +52,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] hwlocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml new file mode 100644 index 000000000000..4c0106cea36d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + +allOf: + - $ref: /schemas/sound/wlf,arizona.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/extcon/wlf,arizona.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + then: + required: + - DCVDD-supply + - MICVDD-supply + else: + properties: + LDOVDD-supply: + description: + Digital power supply, used internally to generate DCVDD when + internally supplied. + + - if: + properties: + compatible: + contains: + enum: + - wlf,wm1814 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8997 + - wlf,wm8998 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - wlf,wm1814 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8998 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + + required: + - DBVDD3-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + - wlf,wm8997 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + + required: + - SPKVDD-supply + else: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + + SPKVDDR-supply: + description: + Right speaker driver power supply. + + required: + - SPKVDDL-supply + - SPKVDDR-supply + +properties: + compatible: + enum: + - cirrus,cs47l24 + - wlf,wm1814 + - wlf,wm1831 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8997 + - wlf,wm8998 + + reg: + maxItems: 1 + + AVDD-supply: + description: + Analogue power supply. + + CPVDD-supply: + description: + Charge pump power supply. + + DBVDD1-supply: + description: + Databus power supply. + + DCVDD-supply: + description: + Digital power supply, normally supplied internally except on cs47l24, + wm1831 where it is mandatory. + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number and the second cell is used to + specify optional parameters. + const: 2 + + wlf,gpio-defaults: + description: + A list of GPIO configuration register values. Defines for the + appropriate values can found in dt-bindings/mfd/arizona.h. If + absent, no configuration of these registers is performed. If any + entry has a value that is out of range for a 16 bit register then the + chip default will be used. If present exactly five values must be + specified. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + minItems: 1 + maxItems: 5 + + interrupt-controller: true + + '#interrupt-cells': + description: + The first cell is the IRQ number. The second cell is the flags, + encoded as trigger masks. + const: 2 + + interrupts: + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1 and MCLK2. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Should contains two strings mclk1 for the clock supplied on MCLK1, + recommended to be a high quality audio reference clock mclk2 for the + clock supplied on MCLK2, recommended to be an always on 32k clock. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk1 + - const: mclk2 + + reset-gpios: + maxItems: 1 + + wlf,reset: + description: + GPIO specifier for the GPIO controlling RESET + deprecated: true + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - AVDD-supply + - CPVDD-supply + - DBVDD1-supply + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + wm5102: codec@1a { + compatible = "wlf,wm5102"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + CPVDD-supply = <&vdd1v8>; + LDOVDD-supply = <&vdd1v8>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + interrupts = <347>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + + gpio-controller; + #gpio-cells = <2>; + + #sound-dai-cells = <1>; + + wlf,gpio-defaults = < + ARIZONA_GP_FN_TXLRCLK + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + >; + + clocks = <&clks 0>, <&clks 1>; + clock-names = "mclk1", "mclk2"; + + wlf,inmode = ; + wlf,dmic-ref = ; + + wlf,use-jd2; + wlf,use-jd2-nopull; + wlf,jd-invert; + + wlf,micd-software-compare; + wlf,micd-detect-debounce = <0>; + wlf,micd-pol-gpio = <&codec 2 0>; + wlf,micd-rate = ; + wlf,micd-dbtime = <4>; + wlf,micd-timeout-ms = <100>; + wlf,micd-force-micbias; + wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>, + <0x2000 ARIZONA_DMIC_MICBIAS2 1>; + + wlf,gpsw = ; + }; + }; diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml index 78dcf6ef3883..d1175030781a 100644 --- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml +++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml @@ -20,16 +20,20 @@ properties: - description: Qi Hardware Ben NanoNote items: - const: qi,lb60 + - const: ingenic,jz4740 - description: Game Consoles Worldwide GCW Zero items: - const: gcw,zero + - const: ingenic,jz4770 - description: MIPS Creator CI20 items: - const: img,ci20 + - const: ingenic,jz4780 - description: YSH & ATIL General Board CU Neo items: - const: yna,cu1000-neo + - const: ingenic,x1000 ... diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml index 200de9396036..987b287f3bff 100644 --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -41,8 +41,8 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object - allOf: - - $ref: mmc-controller.yaml + $ref: mmc-controller.yaml + properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 2f45dd0d04db..d93f7794a85f 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - socionext,uniphier-sd4hc + - socionext,uniphier-sd4hc - const: cdns,sd4hc reg: @@ -36,91 +36,80 @@ properties: cdns,phy-input-delay-sd-highspeed: description: Value of the delay in the input path for SD high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-legacy: description: Value of the delay in the input path for legacy timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr12: description: Value of the delay in the input path for SD UHS SDR12 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr25: description: Value of the delay in the input path for SD UHS SDR25 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr50: description: Value of the delay in the input path for SD UHS SDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-ddr50: description: Value of the delay in the input path for SD UHS DDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-mmc-highspeed: description: Value of the delay in the input path for MMC high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-mmc-ddr: description: Value of the delay in the input path for eMMC high-speed DDR timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f # PHY DLL clock delays: # Each delay property represents the fraction of the clock period. # The approximate delay value will be # (/128)*sdmclk_clock_period. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-dll-delay-sdclk: description: | Value of the delay introduced on the sdclk output for all modes except HS200, HS400 and HS400_ES. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f cdns,phy-dll-delay-sdclk-hsmmc: description: | Value of the delay introduced on the sdclk output for HS200, HS400 and HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f cdns,phy-dll-delay-strobe: description: | Value of the delay introduced on the dat_strobe input used in HS400 / HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f required: - compatible diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml new file mode 100644 index 000000000000..e60bfe980ab3 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs MMC Controller DT bindings + +maintainers: + - Paul Cercueil + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4740-mmc + - ingenic,jz4725b-mmc + - ingenic,jz4760-mmc + - ingenic,jz4780-mmc + - ingenic,x1000-mmc + - items: + - const: ingenic,jz4770-mmc + - const: ingenic,jz4760-mmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: mmc + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +examples: + - | + #include + #include + mmc0: mmc@13450000 { + compatible = "ingenic,jz4780-mmc"; + reg = <0x13450000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <37>; + + clocks = <&cgu JZ4780_CLK_MSC0>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, + <&dma JZ4780_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt deleted file mode 100644 index 453d3b9d145d..000000000000 --- a/Documentation/devicetree/bindings/mmc/jz4740.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Ingenic XBurst MMC controllers - -This file documents the device tree properties used for the MMC controller in -Ingenic JZ4740/JZ4760/JZ4780/X1000 SoCs. These are in addition to the core MMC -properties described in mmc.txt. - -Required properties: -- compatible: Should be one of the following: - - "ingenic,jz4740-mmc" for the JZ4740 - - "ingenic,jz4725b-mmc" for the JZ4725B - - "ingenic,jz4760-mmc" for the JZ4760 - - "ingenic,jz4780-mmc" for the JZ4780 - - "ingenic,x1000-mmc" for the X1000 -- reg: Should contain the MMC controller registers location and length. -- interrupts: Should contain the interrupt specifier of the MMC controller. -- clocks: Clock for the MMC controller. - -Optional properties: -- dmas: List of DMA specifiers with the controller specific format - as described in the generic DMA client binding. A tx and rx - specifier is required. -- dma-names: RX and TX DMA request names. - Should be "rx" and "tx", in that order. - -For additional details on DMA client bindings see ../dma/dma.txt. - -Example: - -mmc0: mmc@13450000 { - compatible = "ingenic,jz4780-mmc"; - reg = <0x13450000 0x1000>; - - interrupt-parent = <&intc>; - interrupts = <37>; - - clocks = <&cgu JZ4780_CLK_MSC0>; - clock-names = "mmc"; - - dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index acc9f10871d4..4931fab34d81 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -76,20 +76,18 @@ properties: # Other properties bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - default: 1 description: Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1 max-frequency: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 400000 - - maximum: 200000000 description: Maximum operating frequency of the bus. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 200000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag @@ -212,13 +210,12 @@ properties: eMMC HS400 enhanced strobe mode is supported dsr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 0xffff description: Value the card Driver Stage Register (DSR) should be programmed with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff no-sdio: $ref: /schemas/types.yaml#/definitions/flag @@ -238,25 +235,23 @@ properties: initialization. fixed-emmc-driver-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 4 description: For non-removable eMMC, enforce this driver type. The value is the driver type as specified in the eMMC specification (table 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 post-power-on-delay-ms: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 10 description: It was invented for MMC pwrseq-simple which could be referred to mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 10 supports-cqe: $ref: /schemas/types.yaml#/definitions/flag @@ -333,8 +328,8 @@ patternProperties: - reg "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 maxItems: 2 items: diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml index 12b40213426d..1380501fb8f0 100644 --- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml @@ -47,7 +47,7 @@ examples: - | mmc0: mmc@e0330000 { compatible = "actions,owl-mmc"; - reg = <0x0 0xe0330000 0x0 0x4000>; + reg = <0xe0330000 0x4000>; interrupts = <0 42 4>; clocks = <&cmu 56>; resets = <&cmu 23>; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 89c3edd6a728..01316185e771 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -30,21 +30,21 @@ properties: - items: - enum: # for Rockchip PX30 - - rockchip,px30-dw-mshc + - rockchip,px30-dw-mshc # for Rockchip RK3036 - - rockchip,rk3036-dw-mshc + - rockchip,rk3036-dw-mshc # for Rockchip RK322x - - rockchip,rk3228-dw-mshc + - rockchip,rk3228-dw-mshc # for Rockchip RK3308 - - rockchip,rk3308-dw-mshc + - rockchip,rk3308-dw-mshc # for Rockchip RK3328 - - rockchip,rk3328-dw-mshc + - rockchip,rk3328-dw-mshc # for Rockchip RK3368 - - rockchip,rk3368-dw-mshc + - rockchip,rk3368-dw-mshc # for Rockchip RK3399 - - rockchip,rk3399-dw-mshc + - rockchip,rk3399-dw-mshc # for Rockchip RV1108 - - rockchip,rv1108-dw-mshc + - rockchip,rv1108-dw-mshc - const: rockchip,rk3288-dw-mshc reg: @@ -76,8 +76,7 @@ properties: high speed modes. rockchip,default-sample-phase: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 0 @@ -87,8 +86,7 @@ properties: If not specified 0 deg will be used. rockchip,desired-num-phases: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 360 @@ -111,7 +109,7 @@ examples: #include sdmmc: mmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xff0c0000 0x0 0x4000>; + reg = <0xff0c0000 0x4000>; interrupts = ; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml index cdfac9b4411b..8d6413f48823 100644 --- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml @@ -35,15 +35,15 @@ properties: oneOf: - const: host - items: - - const: host - - const: bridge + - const: host + - const: bridge - items: - - const: host - - const: hw + - const: host + - const: hw - items: - - const: host - - const: bridge - - const: hw + - const: host + - const: bridge + - const: hw resets: minItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 890d47a87ac5..85bd528e9a14 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -27,39 +27,35 @@ properties: clock to this at probe time. fifo-depth: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The maximum size of the tx/rx fifo's. If this property is not specified, the default value of the fifo size is determined from the controller registers. + $ref: /schemas/types.yaml#/definitions/uint32 card-detect-delay: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 description: Delay in milli-seconds before detecting card after card insert event. The default value is 0. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 data-addr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Override fifo address with value provided by DT. The default FIFO reg offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by driver. If the controller does not follow this rule, please use this property to set fifo address in device tree. + $ref: /schemas/types.yaml#/definitions/uint32 fifo-watermark-aligned: - allOf: - - $ref: /schemas/types.yaml#/definitions/flag description: Data done irq is expected if data length is less than watermark in PIO mode. But fifo watermark is requested to be aligned with data length in some SoC so that TX/RX irq can be generated with data done irq. Add this watermark quirk to mark this requirement and force fifo watermark setting accordingly. + $ref: /schemas/types.yaml#/definitions/flag dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 5d3fa412aabd..c033ac3f147d 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -75,13 +75,12 @@ patternProperties: allwinner,rb: description: Contains the native Ready/Busy IDs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 46e6b6726bc0..c07b91592cbd 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -54,8 +54,8 @@ properties: reg: register reset oneOf: - items: - - const: nand - - const: reg + - const: nand + - const: reg - const: nand - const: reg diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt deleted file mode 100644 index c02259353327..000000000000 --- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt +++ /dev/null @@ -1,92 +0,0 @@ -* Ingenic JZ4780 NAND/ECC - -This file documents the device tree bindings for NAND flash devices on the -JZ4780. NAND devices are connected to the NEMC controller (described in -memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must -be children of the NEMC node. - -Required NAND controller device properties: -- compatible: Should be one of: - * ingenic,jz4740-nand - * ingenic,jz4725b-nand - * ingenic,jz4780-nand -- reg: For each bank with a NAND chip attached, should specify a bank number, - an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank). - -Optional NAND controller device properties: -- ecc-engine: To make use of the hardware ECC controller, this - property must contain a phandle for the ECC controller node. The required - properties for this node are described below. If this is not specified, - software ECC will be used instead. - -Optional children nodes: -- Individual NAND chips are children of the NAND controller node. - -Required children node properties: -- reg: An integer ranging from 1 to 6 representing the CS line to use. - -Optional children node properties: -- nand-ecc-step-size: ECC block size in bytes. -- nand-ecc-strength: ECC strength (max number of correctable bits). -- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default -- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false -- rb-gpios: GPIO specifier for the busy pin. -- wp-gpios: GPIO specifier for the write protect pin. - -Optional child node of NAND chip nodes: -- partitions: see Documentation/devicetree/bindings/mtd/partition.txt - -Example: - -nemc: nemc@13410000 { - ... - - nandc: nand-controller@1 { - compatible = "ingenic,jz4780-nand"; - reg = <1 0 0x1000000>; /* Bank 1 */ - - #address-cells = <1>; - #size-cells = <0>; - - ecc-engine = <&bch>; - - nand@1 { - reg = <1>; - - nand-ecc-step-size = <1024>; - nand-ecc-strength = <24>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - - rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>; - - partitions { - #address-cells = <2>; - #size-cells = <2>; - ... - } - }; - }; -}; - -The ECC controller is a separate SoC component used for error correction on -NAND devices. The following is a description of the device properties for a -ECC controller. - -Required ECC properties: -- compatible: Should be one of: - * ingenic,jz4740-ecc - * ingenic,jz4725b-bch - * ingenic,jz4780-bch -- reg: Should specify the ECC controller registers location and length. -- clocks: Clock for the ECC controller. - -Example: - -bch: bch@134d0000 { - compatible = "ingenic,jz4780-bch"; - reg = <0x134d0000 0x10000>; - - clocks = <&cgu JZ4780_CLK_BCH>; -}; diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml new file mode 100644 index 000000000000..8abb6d463cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs NAND controller devicetree bindings + +maintainers: + - Paul Cercueil + +allOf: + - $ref: nand-controller.yaml# + +properties: + compatible: + enum: + - ingenic,jz4740-nand + - ingenic,jz4725b-nand + - ingenic,jz4780-nand + + reg: + items: + - description: Bank number, offset and size of first attached NAND chip + - description: Bank number, offset and size of second attached NAND chip + - description: Bank number, offset and size of third attached NAND chip + - description: Bank number, offset and size of fourth attached NAND chip + minItems: 1 + + ecc-engine: true + + partitions: + type: object + description: + Node containing description of fixed partitions. + See Documentation/devicetree/bindings/mtd/partition.txt + +patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + rb-gpios: + description: GPIO specifier for the busy pin. + maxItems: 1 + + wp-gpios: + description: GPIO specifier for the write-protect pin. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include + memory-controller@13410000 { + compatible = "ingenic,jz4780-nemc"; + reg = <0x13410000 0x10000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0x1b000000 0x1000000>, + <2 0 0x1a000000 0x1000000>, + <3 0 0x19000000 0x1000000>, + <4 0 0x18000000 0x1000000>, + <5 0 0x17000000 0x1000000>, + <6 0 0x16000000 0x1000000>; + + clocks = <&cgu JZ4780_CLK_NEMC>; + + nand-controller@1 { + compatible = "ingenic,jz4780-nand"; + reg = <1 0 0x1000000>; + + #address-cells = <1>; + #size-cells = <0>; + + ecc-engine = <&bch>; + + ingenic,nemc-tAS = <10>; + ingenic,nemc-tAH = <5>; + ingenic,nemc-tBP = <10>; + ingenic,nemc-tAW = <15>; + ingenic,nemc-tSTRV = <100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <2>; + #size-cells = <2>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x0 0x0 0x800000>; + }; + + partition@800000 { + label = "u-boot"; + reg = <0x0 0x800000 0x0 0x200000>; + }; + + partition@a00000 { + label = "u-boot-env"; + reg = <0x0 0xa00000 0x0 0x200000>; + }; + + partition@c00000 { + label = "boot"; + reg = <0x0 0xc00000 0x0 0x4000000>; + }; + + partition@4c00000 { + label = "system"; + reg = <0x0 0x4c00000 0x1 0xfb400000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index d261b7096c69..cde7c4d79efe 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -47,29 +47,26 @@ patternProperties: Contains the native Ready/Busy IDs. nand-ecc-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ] description: Desired ECC engine, either hardware (most of the time embedded in the NAND controller) or software correction (Linux will handle the calculations). soft_bch is deprecated and should be replaced by soft and nand-ecc-algo. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die] nand-ecc-algo: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ hamming, bch, rs ] description: Desired ECC algorithm. + $ref: /schemas/types.yaml#/definitions/string + enum: [hamming, bch, rs] nand-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 16 ] - - default: 8 description: Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 nand-on-flash-bbt: $ref: /schemas/types.yaml#/definitions/flag @@ -83,18 +80,16 @@ patternProperties: build a volatile BBT in RAM. nand-ecc-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Maximum number of bits that can be corrected per ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-step-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Number of data bytes covered by a single ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-maximize: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index db36b4d86484..c7c9ad4e3f9f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -19,8 +19,8 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac - - const: allwinner,sun50i-a64-emac + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt deleted file mode 100644 index c8ae996bd8f2..000000000000 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Calxeda Highbank 10Gb XGMAC Ethernet - -Required properties: -- compatible : Should be "calxeda,hb-xgmac" -- reg : Address and length of the register set for the device -- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. - The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - -ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; -}; diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml new file mode 100644 index 000000000000..c3ca26666ede --- /dev/null +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank 10Gb XGMAC Ethernet controller + +description: | + The Calxeda XGMAC Ethernet controllers are directly connected to the + internal machine "network fabric", which is set up, initialised and + managed by the firmware. So there are no PHY properties in this + binding. Switches in the fabric take care of routing and mapping the + traffic to external network ports. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-xgmac + + reg: + maxItems: 1 + + interrupts: + description: | + Can point to at most 3 xgmac interrupts. The 1st one is the main + interrupt, the 2nd one is used for power management. The optional + 3rd one is the low power state interrupt. + minItems: 2 + maxItems: 3 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; + }; diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index cccf8202c8f7..798fa5fb7bb2 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings description: Bosch MCAN controller for CAN bus maintainers: - - Sriram Dash + - Sriram Dash properties: compatible: @@ -51,61 +51,60 @@ properties: bosch,mram-cfg: description: | - Message RAM configuration data. - Multiple M_CAN instances can share the same Message RAM - and each element(e.g Rx FIFO or Tx Buffer and etc) number - in Message RAM is also configurable, so this property is - telling driver how the shared or private Message RAM are - used by this M_CAN controller. + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. - The format should be as follows: - - The 'offset' is an address offset of the Message RAM where - the following elements start from. This is usually set to - 0x0 if you're using a private Message RAM. The remain cells - are used to specify how many elements are used for each FIFO/Buffer. + The format should be as follows: + + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words - Please refer to 2.4.1 Message RAM Configuration in Bosch - M_CAN user manual for details. - allOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - - items: - items: - - description: The 'offset' is an address offset of the Message RAM - where the following elements start from. This is usually - set to 0x0 if you're using a private Message RAM. - default: 0 - - description: 11-bit Filter 0-128 elements / 0-128 words - minimum: 0 - maximum: 128 - - description: 29-bit Filter 0-64 elements / 0-128 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 0 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 1 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx Buffers 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Tx Event FIFO 0-32 elements / 0-64 words - minimum: 0 - maximum: 32 - - description: Tx Buffers 0-32 elements / 0-576 words - minimum: 0 - maximum: 32 - maxItems: 1 + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + $ref: /schemas/types.yaml#/definitions/int32-array + items: + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 can-transceiver: $ref: can-transceiver.yaml# diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b60ed6a..1c4474036d46 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$" local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 max-frame-size: $ref: /schemas/types.yaml#definitions/uint32 @@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes. managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#definitions/string + default: auto + enum: + - auto + - in-band-status fixed-link: allOf: @@ -183,11 +180,10 @@ properties: then: properties: speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] description: Link speed. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [10, 100, 1000] full-duplex: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..1788884b8c28 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] qca,keep-pll-enabled: description: | @@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml - + $ref: /schemas/regulator/regulator.yaml examples: - | diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 7b749fc04c32..a3561276e609 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -93,16 +93,14 @@ properties: - const: config qcom,smem-states: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - description: Whether the "ipa-clock-enabled" state bit is valid - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid @@ -172,9 +170,9 @@ examples: modem-remoteproc = <&mss_pil>; iommus = <&apps_smmu 0x720 0x3>; - reg = <0 0x1e40000 0 0x7000>, - <0 0x1e47000 0 0x2000>, - <0 0x1e04000 0 0x2c000>; + reg = <0x1e40000 0x7000>, + <0x1e47000 0x2000>, + <0x1e04000 0x2c000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 7f84df9790e2..08678af5ed93 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -29,8 +29,9 @@ properties: - renesas,rcar-gen1-ether # a generic R-Car Gen1 device - items: - enum: - - renesas,ether-r8a7745 # device is a part of R8A7745 SoC + - renesas,ether-r8a7742 # device is a part of R8A7742 SoC - renesas,ether-r8a7743 # device is a part of R8A7743 SoC + - renesas,ether-r8a7745 # device is a part of R8A7745 SoC - renesas,ether-r8a7790 # device is a part of R8A7790 SoC - renesas,ether-r8a7791 # device is a part of R8A7791 SoC - renesas,ether-r8a7793 # device is a part of R8A7793 SoC @@ -40,8 +41,8 @@ properties: reg: items: - - description: E-DMAC/feLic registers - - description: TSU registers + - description: E-DMAC/feLic registers + - description: TSU registers minItems: 1 interrupts: @@ -92,7 +93,7 @@ examples: ethernet@ee700000 { compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; + reg = <0xee700000 0x400>; interrupt-parent = <&gic>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 87dad2dd8ca0..032b76f14f4f 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -5,6 +5,7 @@ interface contains. Required properties: - compatible: Must contain one or more of the following: + - "renesas,etheravb-r8a7742" for the R8A7742 SoC. - "renesas,etheravb-r8a7743" for the R8A7743 SoC. - "renesas,etheravb-r8a7744" for the R8A7744 SoC. - "renesas,etheravb-r8a7745" for the R8A7745 SoC. diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index e08cd4c4d568..30a1efd26626 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -27,6 +27,7 @@ select: - snps,dwmac-3.710 - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -62,6 +63,7 @@ properties: - snps,dwmac-3.710 - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -87,7 +89,8 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 5 + additionalItems: true items: - description: GMAC main clock - description: Peripheral registers interface clock @@ -97,6 +100,8 @@ properties: clock will be used and this is fine on some platforms. clock-names: + minItems: 1 + maxItems: 5 additionalItems: true contains: enum: @@ -199,14 +204,13 @@ properties: snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 3 + maxItems: 3 snps,aal: $ref: /schemas/types.yaml#definitions/flag @@ -301,27 +305,24 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flag @@ -342,6 +343,7 @@ allOf: - allwinner,sun50i-a64-emac - snps,dwmac-4.00 - snps,dwmac-4.10a + - snps,dwmac-4.20a - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt deleted file mode 100644 index a90eef11dc46..000000000000 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ /dev/null @@ -1,44 +0,0 @@ -STMicroelectronics STM32 / MCU DWMAC glue layer controller - -This file documents platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -The device node has following properties. - -Required properties: -- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and - "snps,dwmac-3.50a" to select IP version. - For MPU family should be "st,stm32mp1-dwmac" to select - glue, and "snps,dwmac-4.20a" to select IP version. -- clocks: Must contain a phandle for each entry in clock-names. -- clock-names: Should be "stmmaceth" for the host clock. - Should be "mac-clk-tx" for the MAC TX clock. - Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Should be "macirq" for the main MAC IRQ - Should be "eth_wake_irq" for the IT which wake up system -- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which - encompases the glue register, and the offset of the control register. - -Optional properties: -- clock-names: For MPU family "eth-ck" for PHY without quartz -- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. -- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. - -Example: - - ethernet@40028000 { - compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 61 0>, <0 62 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - snps,mixed-burst; - dma-ranges; - }; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml new file mode 100644 index 000000000000..fafa34cebdb1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller + +maintainers: + - Alexandre Torgue + - Christophe Roullier + +description: + This file documents platform glue layer for stmmac. + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - st,stm32-dwmac + - st,stm32mp1-dwmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32mp1-dwmac + - const: snps,dwmac-4.20a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-4.10a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-3.50a + + clocks: + minItems: 3 + maxItems: 5 + items: + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz + + clock-names: + minItems: 3 + maxItems: 5 + contains: + enum: + - stmmaceth + - mac-clk-tx + - mac-clk-rx + - ethstp + - eth-ck + + st,syscon: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, and the offset of the control register + + st,eth-clk-sel: + description: + set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. + type: boolean + + st,eth-ref-clk-sel: + description: + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. + type: boolean + +required: + - compatible + - clocks + - clock-names + - st,syscon + +examples: + - | + #include + #include + #include + #include + //Example 1 + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + phy-mode = "rgmii"; + }; + + //Example 2 (MCU example) + ethernet1: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + phy-mode = "mii"; + }; + + //Example 3 + ethernet2: ethernet@40027000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + phy-mode = "mii"; + }; diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 976f139bb66e..3ea0e1290dbb 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -23,14 +23,14 @@ properties: oneOf: - const: ti,cpsw-switch - items: - - const: ti,am335x-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am335x-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,am4372-cpsw-switch - - const: ti,cpsw-switch + - const: ti,am4372-cpsw-switch + - const: ti,cpsw-switch - items: - - const: ti,dra7-cpsw-switch - - const: ti,cpsw-switch + - const: ti,dra7-cpsw-switch + - const: ti,cpsw-switch reg: maxItems: 1 @@ -105,8 +105,7 @@ properties: description: label associated with this port ti,dual-emac-pvid: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 1024 description: @@ -150,10 +149,9 @@ properties: patternProperties: "^mdio@": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. + $ref: "ti,davinci-mdio.yaml#" required: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 242ac4935a4b..d454c1fab930 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -18,33 +18,31 @@ allOf: properties: compatible: oneOf: - - const: ti,davinci_mdio - - items: - - const: ti,keystone_mdio - - const: ti,davinci_mdio - - items: - - const: ti,cpsw-mdio - - const: ti,davinci_mdio - - items: - - const: ti,am4372-mdio - - const: ti,cpsw-mdio - - const: ti,davinci_mdio + - const: ti,davinci_mdio + - items: + - const: ti,keystone_mdio + - const: ti,davinci_mdio + - items: + - const: ti,cpsw-mdio + - const: ti,davinci_mdio + - items: + - const: ti,am4372-mdio + - const: ti,cpsw-mdio + - const: ti,davinci_mdio reg: maxItems: 1 bus_freq: - maximum: 2500000 - description: - MDIO Bus frequency + maximum: 2500000 + description: MDIO Bus frequency ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio if: properties: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index c87395f360a6..71d9e6c1c72e 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -103,8 +103,7 @@ properties: type: object description: CPSW2G NUSS external ports - allOf: - - $ref: ethernet-controller.yaml# + $ref: ethernet-controller.yaml# properties: reg: @@ -139,8 +138,8 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" + $ref: "ti,davinci-mdio.yaml#" + description: CPSW MDIO bus. @@ -174,37 +173,41 @@ examples: #include #include - mcu_cpsw: ethernet@46000000 { - compatible = "ti,am654-cpsw-nuss"; + bus { #address-cells = <2>; #size-cells = <2>; - reg = <0x0 0x46000000 0x0 0x200000>; - reg-names = "cpsw_nuss"; - ranges = <0x0 0x0 0x46000000 0x0 0x200000>; - dma-coherent; - clocks = <&k3_clks 5 10>; - clock-names = "fck"; - power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; - dmas = <&mcu_udmap 0xf000>, - <&mcu_udmap 0xf001>, - <&mcu_udmap 0xf002>, - <&mcu_udmap 0xf003>, - <&mcu_udmap 0xf004>, - <&mcu_udmap 0xf005>, - <&mcu_udmap 0xf006>, - <&mcu_udmap 0xf007>, - <&mcu_udmap 0x7000>; - dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "rx"; + mcu_cpsw: ethernet@46000000 { + compatible = "ti,am654-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "rx"; - cpsw_port1: port@1 { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { reg = <1>; ti,mac-only; label = "port1"; @@ -213,23 +216,24 @@ examples: phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; - }; - }; + }; + }; - davinci_mdio: mdio@f00 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x0 0xf00 0x0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&k3_clks 5 10>; - clock-names = "fck"; - bus_freq = <1000000>; + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + bus_freq = <1000000>; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,fifo-depth = ; - }; + }; + }; }; cpts@3d000 { diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.txt b/Documentation/devicetree/bindings/nvmem/imx-iim.txt deleted file mode 100644 index 1978c5bcd96d..000000000000 --- a/Documentation/devicetree/bindings/nvmem/imx-iim.txt +++ /dev/null @@ -1,22 +0,0 @@ -Freescale i.MX IC Identification Module (IIM) device tree bindings - -This binding represents the IC Identification Module (IIM) found on -i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. - -Required properties: -- compatible: should be one of - "fsl,imx25-iim", "fsl,imx27-iim", - "fsl,imx31-iim", "fsl,imx35-iim", - "fsl,imx51-iim", "fsl,imx53-iim", -- reg: Should contain the register base and length. -- interrupts: Should contain the interrupt for the IIM -- clocks: Should contain a phandle pointing to the gated peripheral clock. - -Example: - - iim: iim@63f98000 { - compatible = "fsl,imx53-iim", "fsl,imx27-iim"; - reg = <0x63f98000 0x4000>; - interrupts = <69>; - clocks = <&clks IMX5_CLK_IIM_GATE>; - }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml new file mode 100644 index 000000000000..9cc43e7a4b38 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX IC Identification Module (IIM) device tree bindings + +maintainers: + - Anson Huang + +description: | + This binding represents the IC Identification Module (IIM) found on + i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - fsl,imx25-iim + - fsl,imx27-iim + - fsl,imx31-iim + - fsl,imx35-iim + - fsl,imx51-iim + - fsl,imx53-iim + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include + + iim: efuse@63f98000 { + compatible = "fsl,imx53-iim"; + reg = <0x63f98000 0x4000>; + interrupts = <69>; + clocks = <&clks IMX5_CLK_IIM_GATE>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt deleted file mode 100644 index 6e346d5cddcf..000000000000 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ /dev/null @@ -1,50 +0,0 @@ -Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings - -This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, -i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. - -Required properties: -- compatible: should be one of - "fsl,imx6q-ocotp" (i.MX6Q/D/DL/S), - "fsl,imx6sl-ocotp" (i.MX6SL), or - "fsl,imx6sx-ocotp" (i.MX6SX), - "fsl,imx6ul-ocotp" (i.MX6UL), - "fsl,imx6ull-ocotp" (i.MX6ULL/ULZ), - "fsl,imx7d-ocotp" (i.MX7D/S), - "fsl,imx6sll-ocotp" (i.MX6SLL), - "fsl,imx7ulp-ocotp" (i.MX7ULP), - "fsl,imx8mq-ocotp" (i.MX8MQ), - "fsl,imx8mm-ocotp" (i.MX8MM), - "fsl,imx8mn-ocotp" (i.MX8MN), - "fsl,imx8mp-ocotp" (i.MX8MP), - followed by "syscon". -- #address-cells : Should be 1 -- #size-cells : Should be 1 -- reg: Should contain the register base and length. -- clocks: Should contain a phandle pointing to the gated peripheral clock. - -Optional properties: -- read-only: disable write access - -Optional Child nodes: - -- Data cells of ocotp: - Detailed bindings are described in bindings/nvmem/nvmem.txt - -Example: - ocotp: ocotp@21bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx6sx-ocotp", "syscon"; - reg = <0x021bc000 0x4000>; - clocks = <&clks IMX6SX_CLK_OCOTP>; - - tempmon_calib: calib@38 { - reg = <0x38 4>; - }; - - tempmon_temp_grade: temp-grade@20 { - reg = <0x20 4>; - }; - }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml new file mode 100644 index 000000000000..fe9c7df78ea1 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings + +maintainers: + - Anson Huang + +description: | + This binding represents the on-chip eFuse OTP controller found on + i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - fsl,imx6q-ocotp + - fsl,imx6sl-ocotp + - fsl,imx6sx-ocotp + - fsl,imx6ul-ocotp + - fsl,imx6ull-ocotp + - fsl,imx7d-ocotp + - fsl,imx6sll-ocotp + - fsl,imx7ulp-ocotp + - fsl,imx8mq-ocotp + - fsl,imx8mm-ocotp + - fsl,imx8mn-ocotp + - fsl,imx8mp-ocotp + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + maxItems: 1 + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + + properties: + reg: + maxItems: 1 + description: + Offset and size in bytes within the storage device. + + required: + - reg + + additionalProperties: false + +examples: + - | + #include + + ocotp: efuse@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt deleted file mode 100644 index 372c72fd64dc..000000000000 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt +++ /dev/null @@ -1,24 +0,0 @@ -On-Chip OTP Memory for Freescale i.MX23/i.MX28 - -Required properties : -- compatible : - - "fsl,imx23-ocotp" for i.MX23 - - "fsl,imx28-ocotp" for i.MX28 -- #address-cells : Should be 1 -- #size-cells : Should be 1 -- reg : Address and length of OTP controller registers -- clocks : Should contain a reference to the hbus clock - -= Data cells = -Are child nodes of mxs-ocotp, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example for i.MX28: - - ocotp: ocotp@8002c000 { - compatible = "fsl,imx28-ocotp", "fsl,ocotp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x8002c000 0x2000>; - clocks = <&clks 25>; - }; diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml new file mode 100644 index 000000000000..ff317fd7c15b --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: On-Chip OTP Memory for Freescale i.MX23/i.MX28 + +maintainers: + - Anson Huang + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - fsl,imx23-ocotp + - fsl,imx28-ocotp + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + ocotp: efuse@8002c000 { + compatible = "fsl,imx28-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8002c000 0x2000>; + clocks = <&clks 25>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 65980224d550..b459f9dba6c9 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -67,8 +67,6 @@ patternProperties: required: - reg - additionalProperties: false - examples: - | #include diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt deleted file mode 100644 index 265bdb7dc8aa..000000000000 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ /dev/null @@ -1,54 +0,0 @@ -= Rockchip eFuse device tree bindings = - -Required properties: -- compatible: Should be one of the following. - - "rockchip,rk3066a-efuse" - for RK3066a SoCs. - - "rockchip,rk3188-efuse" - for RK3188 SoCs. - - "rockchip,rk3228-efuse" - for RK3228 SoCs. - - "rockchip,rk3288-efuse" - for RK3288 SoCs. - - "rockchip,rk3328-efuse" - for RK3328 SoCs. - - "rockchip,rk3368-efuse" - for RK3368 SoCs. - - "rockchip,rk3399-efuse" - for RK3399 SoCs. -- reg: Should contain the registers location and exact eFuse size -- clocks: Should be the clock id of eFuse -- clock-names: Should be "pclk_efuse" - -Optional properties: -- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse - size in property will be invalid if define this property. - -Deprecated properties: -- compatible: "rockchip,rockchip-efuse" - Old efuse compatible value compatible to rk3066a, rk3188 and rk3288 - efuses - -= Data cells = -Are child nodes of eFuse, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example: - - efuse: efuse@ffb40000 { - compatible = "rockchip,rk3288-efuse"; - reg = <0xffb40000 0x20>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cru PCLK_EFUSE256>; - clock-names = "pclk_efuse"; - - /* Data cells */ - cpu_leakage: cpu_leakage { - reg = <0x17 0x1>; - }; - }; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -Example: - - cpu_leakage { - ... - nvmem-cells = <&cpu_leakage>; - nvmem-cell-names = "cpu_leakage"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml new file mode 100644 index 000000000000..3ae00b0b23bc --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip eFuse device tree bindings + +maintainers: + - Heiko Stuebner + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - rockchip,rk3066a-efuse + - rockchip,rk3188-efuse + - rockchip,rk3228-efuse + - rockchip,rk3288-efuse + - rockchip,rk3328-efuse + - rockchip,rk3368-efuse + - rockchip,rk3399-efuse + + # Deprecated: old compatible value for rk3066a, rk3188 and rk3288 + - rockchip,rockchip-efuse + + reg: + description: + Registers location and eFuse size. + maxItems: 1 + + clocks: + description: + eFuse clock id. + maxItems: 1 + + clock-names: + const: pclk_efuse + + rockchip,efuse-size: + description: + eFuse size in bytes. The eFuse size in property will be invalid if + this property is defined. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + - | + #include + efuse: efuse@ffb40000 { + compatible = "rockchip,rk3288-efuse"; + reg = <0xffb40000 0x20>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE256>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpu_leakage: cpu_leakage@17 { + reg = <0x17 0x1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index d84deb4774a4..c11c99f085d7 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -24,6 +24,18 @@ properties: - st,stm32f4-otp - st,stm32mp15-bsec +patternProperties: + "^.*@[0-9a-f]+$": + type: object + + properties: + st,non-secure-otp: + description: | + This property explicits a factory programmed area that both secure + and non-secure worlds can access. It is needed when, by default, the + related area can only be reached by the secure world. + type: boolean + required: - "#address-cells" - "#size-cells" @@ -41,6 +53,11 @@ examples: calib@22c { reg = <0x22c 0x2>; }; + + mac_addr@e4 { + reg = <0xe4 0x8>; + st,non-secure-otp; + }; }; ... diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index ab6e43b636ec..cb4e700c0269 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -18,8 +18,7 @@ properties: description: Set into the no BAR match register to configure the number of least significant bits kept during inbound (PCIe -> AXI) address translations - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 64 default: 32 diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml index 6887ccc339cc..fd3978364da9 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -12,8 +12,7 @@ maintainers: properties: cdns,max-outbound-regions: description: maximum number of outbound regions - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 32 default: 32 diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 48a98dae00de..64b2c64ca806 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -71,10 +71,9 @@ properties: max-link-speed: description: Specify PCI Gen for link capability. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 3, 4 ] - - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 bus-range: description: Range of bus numbers associated with this controller. diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index b3df100705b0..0f8e575ac01a 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -18,21 +18,18 @@ properties: max-functions: description: Maximum number of functions that can be configured - allOf: - - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 minimum: 1 default: 1 maximum: 255 max-link-speed: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 2, 3, 4 ] num-lanes: description: maximum number of lanes - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 default: 1 maximum: 16 diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index b94078f58d8e..aeba38f0a387 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -6,7 +6,8 @@ AHB. There is one bridge instance per USB port connected to the internal OHCI and EHCI controllers. Required properties: -- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC; +- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC; + "renesas,pci-r8a7743" for the R8A7743 SoC; "renesas,pci-r8a7744" for the R8A7744 SoC; "renesas,pci-r8a7745" for the R8A7745 SoC; "renesas,pci-r8a7790" for the R8A7790 SoC; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml index 88683db6cf81..18c1ec5e19ad 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -30,6 +30,6 @@ examples: - | mpphy: phy@0 { compatible = "amlogic,axg-mipi-pcie-analog-phy"; - reg = <0x0 0x0 0x0 0xc>; + reg = <0x0 0xc>; #phy-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml index 086478aec946..45f3d72b1cca 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml @@ -44,7 +44,7 @@ examples: #include pcie_phy: pcie-phy@ff644000 { compatible = "amlogic,axg-pcie-phy"; - reg = <0x0 0xff644000 0x0 0x1c>; + reg = <0xff644000 0x1c>; resets = <&reset RESET_PCIE_PHY>; phys = <&mipi_analog_phy PHY_TYPE_PCIE>; phy-names = "analog"; diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt deleted file mode 100644 index 6622bdb2e8bc..000000000000 --- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt +++ /dev/null @@ -1,17 +0,0 @@ -Calxeda Highbank Combination Phys for SATA - -Properties: -- compatible : Should be "calxeda,hb-combophy" -- #phy-cells: Should be 1. -- reg : Address and size for Combination Phy registers. -- phydev: device ID for programming the combophy. - -Example: - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; - diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml new file mode 100644 index 000000000000..16a8bd7644bf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank Combination PHYs binding for SATA + +description: | + The Calxeda Combination PHYs connect the SoC to the internal fabric + and to SATA connectors. The PHYs support multiple protocols (SATA, + SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC + controller). + Programming the PHYs is typically handled by those device drivers, + not by a dedicated PHY driver. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-combophy + + '#phy-cells': + const: 1 + + reg: + maxItems: 1 + + phydev: + description: device ID for programming the ComboPHY. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 31 + +required: + - compatible + - reg + - phydev + - '#phy-cells' + +additionalProperties: false + +examples: + - | + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 9a346d6290d9..77bb5309918e 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -23,7 +23,7 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + const: intel,lgm-emmc-phy "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index c779a3c7d87a..4071438be2ba 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -77,24 +77,21 @@ patternProperties: description: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 3, 4, 5, 6] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6] cdns,num-lanes: description: Number of DisplayPort lanes. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] default: 4 cdns,max-bit-rate: description: Maximum DisplayPort link bit rate to use, in Mbps - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] default: 8100 required: @@ -120,24 +117,30 @@ additionalProperties: false examples: - | #include - torrent_phy: torrent-phy@f0fb500000 { - compatible = "cdns,torrent-phy"; - reg = <0xf0 0xfb500000 0x0 0x00100000>, - <0xf0 0xfb030a00 0x0 0x00000040>; - reg-names = "torrent_phy", "dptx_phy"; - resets = <&phyrst 0>; - clocks = <&ref_clk>; - clock-names = "refclk"; - #address-cells = <1>; - #size-cells = <0>; - torrent_phy_dp: phy@0 { - reg = <0>; - resets = <&phyrst 1>, <&phyrst 2>, - <&phyrst 3>, <&phyrst 4>; - #phy-cells = <0>; - cdns,phy-type = ; - cdns,num-lanes = <4>; - cdns,max-bit-rate = <8100>; - }; + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>, + <0xf0 0xfb030a00 0x0 0x00000040>; + reg-names = "torrent_phy", "dptx_phy"; + resets = <&phyrst 0>; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + phy@0 { + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = ; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index f8bd28ff31c1..b5a6195de7ff 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -83,31 +83,28 @@ then: It is a 6 bit value that specifies offset to be added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 63 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 qcom,bias-ctrl-value: description: It is a 6 bit value that specifies bias-ctrl-value. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 63 - default: 32 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 qcom,charge-ctrl-value: - description: + description: It is a 2 bit value that specifies charge-ctrl-value. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 qcom,hstx-trim-value: description: @@ -115,22 +112,20 @@ then: output current. Possible range is - 15mA to 24mA (stepsize of 600 uA). See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 qcom,preemphasis-level: description: It is a 2 bit value that specifies pre-emphasis level. Possible range is 0 to 15% (stepsize of 5%). See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 qcom,preemphasis-width: description: @@ -138,21 +133,19 @@ then: pre-emphasis (specified using qcom,preemphasis-level) must be in effect. Duration could be half-bit of full-bit. See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 1 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 qcom,hsdisc-trim-value: description: It is a 2 bit value tuning parameter that control disconnect threshold and may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index ac96d6481bb8..a3bd1c4499b7 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -4,7 +4,8 @@ This file provides information on what the device node for the R-Car generation 2 USB PHY contains. Required properties: -- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. +- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC. + "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC. "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC. diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml index 72aca81e8959..8a3032a3bd73 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -59,7 +59,7 @@ examples: - | dsi_dphy: phy@ff2e0000 { compatible = "rockchip,px30-dsi-dphy"; - reg = <0x0 0xff2e0000 0x0 0x10000>; + reg = <0xff2e0000 0x10000>; clocks = <&pmucru 13>, <&cru 12>; clock-names = "ref", "pclk"; resets = <&cru 12>; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml new file mode 100644 index 000000000000..86f49093b65f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe PHY + +description: | + This describes the devicetree bindings for PHY interface built into + PCIe controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro5-pcie-phy + - socionext,uniphier-ld20-pcie-phy + - socionext,uniphier-pxs3-pcie-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + socionext,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to system control to set configurations for phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clock-names = "link"; + clocks = <&sys_clk 24>; + reset-names = "link"; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml new file mode 100644 index 000000000000..479b203f7aa6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB2 PHY + +description: | + This describes the devicetree bindings for PHY interface built into + USB2 controller implemented on Socionext UniPhier SoCs. + Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 + controller doesn't include its own High-Speed PHY. This needs to specify + USB2 PHY instead of USB3 HS-PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb2-phy + - socionext,uniphier-ld11-usb2-phy + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^phy@[0-9]+$": + type: object + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The ID number for the PHY + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + usb-controller { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml new file mode 100644 index 000000000000..f88d36207b87 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 High-Speed (HS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about High-Speed PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro5-usb3-hsphy + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + - socionext,uniphier-pxs3-usb3-hsphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - const: link # for PXs2 + - items: # for PXs3 + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + + vbus-supply: + description: A phandle to the regulator for USB VBUS + + nvmem-cells: + maxItems: 3 + description: + Phandles to nvmem cell that contains the trimming data. + Available only for HS-PHY implemented on LD20 and PXs3, and + if unspecified, default value is used. + + nvmem-cell-names: + items: + - const: rterm + - const: sel_t + - const: hs_i + description: + Should be the following names, which correspond to each nvmem-cells. + All of the 3 parameters associated with the above names are + required for each port, if any one is omitted, the trimming data + of the port will not be set at all. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml new file mode 100644 index 000000000000..edff2c95c9ae --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 Super-Speed (SS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about Super-Speed PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + - socionext,uniphier-pxs3-usb3-ssphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + oneOf: + - items: # for Pro4, Pro5 + - const: gio + - const: link + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro4,Pro5 + - const: gio + - const: link + - items: # for others + - const: link + - const: phy + + vbus-supply: + description: A phandle to the regulator for USB VBUS + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vbus-supply + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt deleted file mode 100644 index 3cee372c5742..000000000000 --- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Socionext UniPhier PCIe PHY bindings - -This describes the devicetree bindings for PHY interface built into -PCIe controller implemented on Socionext UniPhier SoCs. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY - "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY - "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Must be zero. -- clocks: A list of phandles to the clock gate for PCIe glue layer - including this phy. -- clock-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC -- resets: A list of phandles to the reset line for PCIe glue layer - including this phy. -- reset-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC - -Optional properties: -- socionext,syscon: A phandle to system control to set configurations - for phy. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - pcie_phy: phy@66038000 { - compatible = "socionext,uniphier-ld20-pcie-phy"; - reg = <0x66038000 0x4000>; - #phy-cells = <0>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - socionext,syscon = <&soc_glue>; - }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt deleted file mode 100644 index b43b28250cc0..000000000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt +++ /dev/null @@ -1,45 +0,0 @@ -Socionext UniPhier USB2 PHY - -This describes the devicetree bindings for PHY interface built into -USB2 controller implemented on Socionext UniPhier SoCs. - -Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 -controller doesn't include its own High-Speed PHY. This needs to specify -USB2 PHY instead of USB3 HS-PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC - "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC - -Sub-nodes: -Each PHY should be represented as a sub-node. - -Sub-nodes required properties: -- #phy-cells: Should be 0. -- reg: The number of the PHY. - -Sub-nodes optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - soc-glue@5f800000 { - ... - usb-phy { - compatible = "socionext,uniphier-ld11-usb2-phy"; - usb_phy0: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - ... - }; - }; - - usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - ... - phy-names = "usb"; - phys = <&usb_phy0>; - }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt deleted file mode 100644 index 093d4f08705f..000000000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ /dev/null @@ -1,69 +0,0 @@ -Socionext UniPhier USB3 High-Speed (HS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about High-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. -- nvmem-cells: Phandles to nvmem cell that contains the trimming data. - Available only for HS-PHY implemented on LD20 and PXs3, and - if unspecified, default value is used. -- nvmem-cell-names: Should be the following names, which correspond to - each nvmem-cells. - All of the 3 parameters associated with the following names are - required for each port, if any one is omitted, the trimming data - of the port will not be set at all. - "rterm", "sel_t", "hs_i" - Each cell name for phy parameters - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_hsphy0: hs-phy@200 { - compatible = "socionext,uniphier-ld20-usb3-hsphy"; - reg = <0x200 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - nvmem-cell-names = "rterm", "sel_t", "hs_i"; - nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, - <&usb_hs_i0>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt deleted file mode 100644 index 9df2bc2f5999..000000000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ /dev/null @@ -1,58 +0,0 @@ -Socionext UniPhier USB3 Super-Speed (SS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about Super-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC - "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_ssphy0: ss-phy@300 { - compatible = "socionext,uniphier-ld20-usb3-ssphy"; - reg = <0x300 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfefd09d8c1e..7556be6e2754 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -84,13 +84,12 @@ properties: gpio-line-names: true input-debounce: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 5 description: Debouncing periods in microseconds, one period per interrupt bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 5 patternProperties: # It's pretty scary, but the basic idea is that: @@ -115,9 +114,8 @@ patternProperties: bias-pull-down: true drive-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 10, 20, 30, 40 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 20, 30, 40] required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 7651a675ab2d..017d9593573b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -33,26 +33,23 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, - GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, - I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, - LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, - NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3, - PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16, - ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4, - SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, - SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, - TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, - USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30, - VPO12, VPO24, WDTRST1, WDTRST2 ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 36feaf5e2dff..c643d6d44415 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -29,8 +29,7 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon" @@ -43,28 +42,25 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, - GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, - I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, - LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST, - LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1, - RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, - SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, - SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, - SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, - TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD, - USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1, - WDTRST2, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] required: - compatible @@ -125,7 +121,7 @@ examples: lhc: lhc@20 { compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; + reg = <0x20 0x24>, <0x48 0x8>; }; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 45af29bc3202..1506726c7fea 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -30,64 +30,58 @@ patternProperties: then: properties: function: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, - ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, - GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, - I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, - I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, - MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, - PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, - RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, - SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, - SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, - UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, - WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + groups: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, - EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, - FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, - GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, - GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, - I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, - I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, - LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4, - MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, - NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, - PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, - PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, - PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, - RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, - SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, - SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, - SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, - SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, - UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA, - USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt deleted file mode 100644 index a87447180e83..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt +++ /dev/null @@ -1,141 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the pinctrl portion -of the driver. - -Also see these documents for generic binding information: - [1] GPIO : ../gpio/gpio.txt - [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt - -And these for relevant defines: - [3] include/dt-bindings/pinctrl/lochnagar.h - -This binding must be part of the Lochnagar MFD binding: - [4] ../mfd/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar-pinctrl" - - - gpio-controller : Indicates this device is a GPIO controller. - - #gpio-cells : Must be 2. The first cell is the pin number, see - [3] for available pins and the second cell is used to specify - optional parameters, see [1]. - - gpio-ranges : Range of pins managed by the GPIO controller, see - [1]. Both the GPIO and Pinctrl base should be set to zero and the - count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, - see [3]. - - - pinctrl-names : A pinctrl state named "default" must be defined. - - pinctrl-0 : A phandle to the default pinctrl state. - -Required sub-nodes: - -The pin configurations are defined as a child of the pinctrl states -node, see [2]. Each sub-node can have the following properties: - - groups : A list of groups to select (either this or "pins" must be - specified), available groups: - codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1, - psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1, - usb-aif2, adat-aif, soundcard-aif - - pins : A list of pin names to select (either this or "groups" must - be specified), available pins: - fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5, - fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4, - codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1, - dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2, - gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat, - codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk, - codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat, - codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk, - codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk, - dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat, - dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat, - psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk, - psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk, - gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk, - gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk, - gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk, - gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx, - dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx, - codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, - codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, - codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, - dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl, - i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby, - codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk, - gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2 - - function : The mux function to select, available functions: - aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5, - fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4, - codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1, - dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2, - gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout, - dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986, - clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1, - gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2, - dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq, - codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1, - codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1, - codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3, - codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1, - dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx, - dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx, - gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda, - i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1, - psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2, - psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1, - codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat, - codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk, - codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk, - codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1, - dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat, - dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat, - dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, - gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk, - gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, - gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, - gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat, - gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif, - - - output-enable : Specifies that an AIF group will be used as a master - interface (either this or input-enable is required if a group is - being muxed to an AIF) - - input-enable : Specifies that an AIF group will be used as a slave - interface (either this or output-enable is required if a group is - being muxed to an AIF) - -Example: - -lochnagar-pinctrl { - compatible = "cirrus,lochnagar-pinctrl"; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; - - pinctrl-names = "default"; - pinctrl-0 = <&pin-settings>; - - pin-settings: pin-settings { - ap-aif { - input-enable; - groups = "gf-aif1"; - function = "codec-aif3"; - }; - codec-aif { - output-enable; - groups = "codec-aif3"; - function = "gf-aif1"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..420d74856032 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the pinctrl portion of + the driver. + + Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt + + And these for relevant defines: + [3] include/dt-bindings/pinctrl/lochnagar.h + + This binding must be part of the Lochnagar MFD binding: + [4] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number and the second cell is used + to specify optional parameters. + const: 2 + + gpio-ranges: + description: + Range of pins managed by the GPIO controller, see [1]. Both the + GPIO and Pinctrl base should be set to zero and the count to the + appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3]. + maxItems: 1 + + pinctrl-0: + description: + A phandle to the default pinctrl state. + + pinctrl-names: + description: + A pinctrl state named "default" must be defined. + const: default + + pin-settings: + type: object + patternProperties: + '-pins$': + description: + The pin configurations are defined as a child of the pinctrl + states node, see [2]. Each sub-node can have the following + properties. + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + groups: + description: + A list of groups to select (either this or "pins" must be + specified), available groups. + enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1, + dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3, + gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif, + soundcard-aif ] + + pins: + description: + A list of pin names to select (either this or "groups" must + be specified), available pins. + enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, + fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2, + codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6, + codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2, + dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, + gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk, + codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat, + codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk, + codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat, + codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk, + dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat, + dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk, + dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk, + psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk, + psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, + gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk, + gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat, + gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk, + gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, + gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx, + dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, + gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1, + codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, + codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, + codec-dmicdat2, codec-dmicclk3, codec-dmicdat3, + codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1, + dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl, + i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, + dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin, + psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5, + dsp-gpio20, led1, led2 ] + + function: + description: + The mux function to select, available functions. + enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, + fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2, + codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6, + codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2, + dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, + gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, + dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k, + spdif-clkout, clk-12m288, clk-11m2986, clk-24m576, + clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1, + gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, + codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk, + spdif-mclk, codec-irq, codec-reset, dsp-reset, + dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1, + codec-pdmclk2, codec-pdmdat2, codec-dmicclk1, + codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, + codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, + codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1, + dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx, + dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, + gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx, + i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, + i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk, + psia1-rxdat, psia1-txdat, psia2, psia2-bclk, + psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1, + codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat, + codec-aif1-txdat, codec-aif2, codec-aif2-bclk, + codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat, + codec-aif3, codec-aif3-bclk, codec-aif3-lrclk, + codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1, + dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, + dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk, + dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat, + gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat, + gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk, + gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk, + gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2, + gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat, + gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, + soundcard-aif ] + + output-enable: + description: + Specifies that an AIF group will be used as a master + interface (either this or input-enable is required if a + group is being muxed to an AIF) + + input-enable: + description: + Specifies that an AIF group will be used as a slave + interface (either this or output-enable is required if a + group is being muxed to an AIF) + + additionalProperties: false + + required: + - function + + additionalProperties: false + +required: + - compatible + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - pinctrl-0 + - pinctrl-names diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt deleted file mode 100644 index b0e36cf0d289..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt +++ /dev/null @@ -1,99 +0,0 @@ -Cirrus Logic Madera class audio codecs pinctrl driver - -The Cirrus Logic Madera codecs provide a number of GPIO functions for -interfacing to external hardware and to provide logic outputs to other devices. -Certain groups of GPIO pins also have an alternate function, normally as an -audio interface. - -The set of available GPIOs, functions and alternate function groups differs -between codecs so refer to the datasheet for the codec for further information -on what is supported on that device. - -The properties for this driver exist within the parent MFD driver node. - -See also - the core bindings for the parent MFD driver: - Documentation/devicetree/bindings/mfd/madera.txt - - the generic pinmix bindings: - Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Required properties of parent mfd node: - - pinctrl-names : must be "default" - - pinctrl-0 : a phandle to the node containing the subnodes containing default - configurations - -Required subnodes: - One subnode is required to contain the default settings. It contains an - arbitrary number of configuration subnodes, one for each group or pin - configuration you want to apply as a default. - -Required properties of configuration subnodes: - - groups : name of one pin group to configure. One of: - aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2, - dmic4, dmic5, dmic6, - gpio1, gpio2, ..., gpio40 - The gpioN groups select the single pin of this name for configuration - -Optional properties of configuration subnodes: - Any configuration option not explicitly listed in the dts will be left at - chip default setting. - - - function : name of function to assign to this group. One of: - aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2, - dmic3, dmic4, dmic5, dmic6, - io, dsp-gpio, irq1, irq2, - fll1-clk, fll1-lock, fll2-clk, fll2-lock, fll3-clk, fll3-lock, - fllao-clk, fllao-lock, - opclk, opclk-async, pwm1, pwm2, spdif, - asrc1-in1-lock, asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock, - spkl-short-circuit, spkr-short-circuit, spk-shutdown, - spk-overheat-shutdown, spk-overheat-warn, - timer1-sts, timer2-sts, timer3-sts, timer4-sts, timer5-sts, timer6-sts, - timer7-sts, timer8-sts, - log1-fifo-ne, log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, log5-fifo-ne, - log6-fifo-ne, log7-fifo-ne, log8-fifo-ne, - - - bias-disable : disable pull-up and pull-down - - bias-bus-hold : enable buskeeper - - bias-pull-up : output is pulled-up - - bias-pull-down : output is pulled-down - - drive-push-pull : CMOS output - - drive-open-drain : open-drain output - - drive-strength : drive strength in mA. Valid values are 4 or 8 - - input-schmitt-enable : enable schmitt-trigger mode - - input-schmitt-disable : disable schmitt-trigger mode - - input-debounce : A value of 0 disables debounce, a value !=0 enables - debounce - - output-low : set the pin to output mode with low level - - output-high : set the pin to output mode with high level - -Example: - -cs47l85@0 { - compatible = "cirrus,cs47l85"; - - pinctrl-names = "default"; - pinctrl-0 = <&cs47l85_defaults>; - - cs47l85_defaults: cs47l85-gpio-defaults { - aif1 { - groups = "aif1"; - function = "aif1"; - bias-bus-hold; - }; - - aif2 { - groups = "aif2"; - function = "aif2"; - bias-bus-hold; - }; - - opclk { - groups = "gpio1"; - function = "opclk"; - bias-pull-up; - drive-strength = <8>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml new file mode 100644 index 000000000000..6bfc25d0e1b3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Madera class audio CODECs pinctrl driver + +maintainers: + - patches@opensource.cirrus.com + +description: | + The Cirrus Logic Madera codecs provide a number of GPIO functions for + interfacing to external hardware and to provide logic outputs to other devices. + Certain groups of GPIO pins also have an alternate function, normally as an + audio interface. + + The set of available GPIOs, functions and alternate function groups differs + between CODECs so refer to the datasheet for the CODEC for further information + on what is supported on that device. + + The properties for this driver exist within the parent MFD driver node. + + See also the core bindings for the parent MFD driver: + + Documentation/devicetree/bindings/mfd/cirrus,madera.yaml + + And the generic pinmix bindings: + + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +properties: + pinctrl-0: + description: + A phandle to the node containing the subnodes containing default + configurations. + + pinctrl-names: + description: + A pinctrl state named "default" must be defined. + const: default + + pin-settings: + description: + One subnode is required to contain the default settings. It + contains an arbitrary number of configuration subnodes, one for + each group or pin configuration you want to apply as a default. + type: object + patternProperties: + '-pins$': + type: object + allOf: + - $ref: "pincfg-node.yaml#" + - $ref: "pinmux-node.yaml#" + properties: + groups: + description: + Name of one pin group to configure. + enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, + pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3, + gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9, + gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, + gpio16, gpio17, gpio17, gpio18, gpio19, gpio20, + gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, + gpio27, gpio27, gpio28, gpio29, gpio30, gpio31, + gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, + gpio37, gpio38, gpio39 ] + + function: + description: + Name of function to assign to this group. + enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, + pdmspk1, pdmspk2, dmic3, dmic4, dmic5, + dmic6, io, dsp-gpio, irq1, irq2, fll1-clk, + fll1-lock, fll2-clk, fll2-lock, fll3-clk, + fll3-lock, fllao-clk, fllao-lock, opclk, + opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock, + asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock, + spkl-short-circuit, spkr-short-circuit, + spk-shutdown, spk-overheat-shutdown, + spk-overheat-warn, timer1-sts, timer2-sts, + timer3-sts, timer4-sts, timer5-sts, timer6-sts, + timer7-sts, timer8-sts, log1-fifo-ne, + log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, + log5-fifo-ne, log6-fifo-ne, log7-fifo-ne, + log8-fifo-ne ] + + bias-disable: true + + bias-bus-hold: true + + bias-pull-up: true + + bias-pull-down: true + + drive-push-pull: true + + drive-open-drain: true + + drive-strength: + enum: [ 4, 8 ] + + input-schmitt-enable: true + + input-schmitt-disable: true + + input-debounce: true + + output-low: true + + output-high: true + + additionalProperties: false + + required: + - groups + + additionalProperties: false + +required: + - pinctrl-0 + - pinctrl-names diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml index d98a3866add8..6d7d162e6171 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml index b9aa180e07e4..7131cfd1fc45 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml index 6297e78418cf..d474bc1f393b 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml index b30c704fcfa1..0af2b6c95c17 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index cd2b436350ef..2c0acb405e6c 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml @@ -24,12 +24,10 @@ properties: patternProperties: '-pins$': type: object - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml# properties: function: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index 732d9075560b..ef8877ddb1eb 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -122,11 +122,10 @@ properties: this, "pins" or "pinmux" has to be specified) pinmux: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: The list of numeric pin ids and their mux settings that properties in the node apply to (either this, "pins" or "groups" have to be specified) + $ref: /schemas/types.yaml#/definitions/uint32-array pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 63d1cfe86c6e..b2de3992d484 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -49,8 +49,7 @@ patternProperties: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - allOf: - - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: "/schemas/pinctrl/pincfg-node.yaml" properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 46a0478cb924..1f6e51891ddc 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -37,21 +37,18 @@ properties: hwlocks: true st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Should be phandle/offset/mask - Phandle to the syscon node which includes IRQ mux selection. - The offset of the IRQ mux selection register. - The field mask of IRQ mux, needed if different of 0xf. + $ref: "/schemas/types.yaml#/definitions/phandle-array" st,package: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4, 8] description: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h - + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] patternProperties: '^gpio@[0-9a-f]*$': @@ -78,33 +75,30 @@ patternProperties: maximum: 16 st,bank-name: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - GPIOA - - GPIOB - - GPIOC - - GPIOD - - GPIOE - - GPIOF - - GPIOG - - GPIOH - - GPIOI - - GPIOJ - - GPIOK - - GPIOZ description: Should be a name string for this bank as specified in the datasheet. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - GPIOA + - GPIOB + - GPIOC + - GPIOD + - GPIOE + - GPIOF + - GPIOG + - GPIOH + - GPIOI + - GPIOJ + - GPIOK + - GPIOZ st,bank-ioport: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 11 - description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 11 required: - gpio-controller @@ -125,8 +119,7 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: "/schemas/types.yaml#/definitions/uint32-array" description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -180,9 +173,8 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - pinmux diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index 6c6079fe1351..4f524f822e84 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -23,48 +23,119 @@ description: |+ properties: compatible: enum: + - amlogic,meson8-pwrc + - amlogic,meson8b-pwrc + - amlogic,meson8m2-pwrc + - amlogic,meson-gxbb-pwrc - amlogic,meson-g12a-pwrc - amlogic,meson-sm1-pwrc clocks: - minItems: 2 + minItems: 1 + maxItems: 2 clock-names: + minItems: 1 + maxItems: 2 items: - const: vpu - const: vapb resets: minItems: 11 + maxItems: 12 reset-names: - items: - - const: viu - - const: venc - - const: vcbus - - const: bt656 - - const: rdma - - const: venci - - const: vencp - - const: vdac - - const: vdi6 - - const: vencl - - const: vid_lock + minItems: 11 + maxItems: 12 "#power-domain-cells": const: 1 amlogic,ao-sysctrl: description: phandle to the AO sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson8b-pwrc + - amlogic,meson8m2-pwrc + then: + properties: + reset-names: + items: + - const: dblk + - const: pic_dc + - const: hdmi_apb + - const: hdmi_system + - const: venci + - const: vencp + - const: vdac + - const: vencl + - const: viu + - const: venc + - const: rdma + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-gxbb-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: dvin + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-g12a-pwrc + - amlogic,meson-sm1-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + required: + - resets + - reset-names required: - compatible - clocks - clock-names - - resets - - reset-names - "#power-domain-cells" - amlogic,ao-sysctrl diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt deleted file mode 100644 index f0f5553a9e74..000000000000 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ /dev/null @@ -1,91 +0,0 @@ -Freescale i.MX General Power Controller -======================================= - -The i.MX6 General Power Control (GPC) block contains DVFS load tracking -counters and Power Gating Control (PGC). - -Required properties: -- compatible: Should be one of the following: - - fsl,imx6q-gpc - - fsl,imx6qp-gpc - - fsl,imx6sl-gpc - - fsl,imx6sx-gpc -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain one interrupt specifier for the GPC interrupt -- clocks: Must contain an entry for each entry in clock-names. - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - ipg - -The power domains are generic power domain providers as documented in -Documentation/devicetree/bindings/power/power-domain.yaml. They are described as -subnodes of the power gating controller 'pgc' node of the GPC and should -contain the following: - -Required properties: -- reg: Must contain the DOMAIN_INDEX of this power domain - The following DOMAIN_INDEX values are valid for i.MX6Q: - ARM_DOMAIN 0 - PU_DOMAIN 1 - The following additional DOMAIN_INDEX value is valid for i.MX6SL: - DISPLAY_DOMAIN 2 - The following additional DOMAIN_INDEX value is valid for i.MX6SX: - PCI_DOMAIN 3 - -- #power-domain-cells: Should be 0 - -Optional properties: -- clocks: a number of phandles to clocks that need to be enabled during domain - power-up sequencing to ensure reset propagation into devices located inside - this power domain -- power-supply: a phandle to the regulator powering this domain - -Example: - - gpc: gpc@20dc000 { - compatible = "fsl,imx6q-gpc"; - reg = <0x020dc000 0x4000>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, - <0 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_IPG>; - clock-names = "ipg"; - - pgc { - #address-cells = <1>; - #size-cells = <0>; - - power-domain@0 { - reg = <0>; - #power-domain-cells = <0>; - }; - - pd_pu: power-domain@1 { - reg = <1>; - #power-domain-cells = <0>; - power-supply = <®_pu>; - clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>, - <&clks IMX6QDL_CLK_GPU2D_CORE>, - <&clks IMX6QDL_CLK_GPU2D_AXI>, - <&clks IMX6QDL_CLK_OPENVG_AXI>, - <&clks IMX6QDL_CLK_VPU_AXI>; - }; - }; - }; - - -Specifying power domain for IP modules -====================================== - -IP cores belonging to a power domain should contain a 'power-domains' property -that is a phandle pointing to the power domain the device belongs to. - -Example of a device that is part of the PU power domain: - - vpu: vpu@2040000 { - reg = <0x02040000 0x3c000>; - /* ... */ - power-domains = <&pd_pu>; - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml new file mode 100644 index 000000000000..a055b3e819d8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX General Power Controller + +maintainers: + - Philipp Zabel + +description: | + The i.MX6 General Power Control (GPC) block contains DVFS load tracking + counters and Power Gating Control (PGC). + + The power domains are generic power domain providers as documented in + Documentation/devicetree/bindings/power/power-domain.yaml. They are + described as subnodes of the power gating controller 'pgc' node of the GPC. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle pointing to the power domain the device belongs + to. + +properties: + compatible: + enum: + - fsl,imx6q-gpc + - fsl,imx6qp-gpc + - fsl,imx6sl-gpc + - fsl,imx6sx-gpc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + pgc: + type: object + description: list of power domains provided by this controller. + + patternProperties: + "power-domain@[0-9]$": + type: object + properties: + + '#power-domain-cells': + const: 0 + + reg: + description: | + The following DOMAIN_INDEX values are valid for i.MX6Q: + ARM_DOMAIN 0 + PU_DOMAIN 1 + The following additional DOMAIN_INDEX value is valid for i.MX6SL: + DISPLAY_DOMAIN 2 + The following additional DOMAIN_INDEX value is valid for i.MX6SX: + PCI_DOMAIN 3 + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing to ensure reset propagation into devices located + inside this power domain. + minItems: 1 + maxItems: 7 + + power-supply: true + + required: + - '#power-domain-cells' + - reg + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pgc + +additionalProperties: false + +examples: + - | + #include + #include + + gpc@20dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt deleted file mode 100644 index 61649202f6f5..000000000000 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt +++ /dev/null @@ -1,77 +0,0 @@ -Freescale i.MX General Power Controller v2 -========================================== - -The i.MX7S/D General Power Control (GPC) block contains Power Gating -Control (PGC) for various power domains. - -Required properties: - -- compatible: Should be one of: - - "fsl,imx7d-gpc" - - "fsl,imx8mq-gpc" - -- reg: should be register base and length as documented in the - datasheet - -- interrupts: Should contain GPC interrupt request 1 - -Power domains contained within GPC node are generic power domain -providers, documented in -Documentation/devicetree/bindings/power/power-domain.yaml, which are -described as subnodes of the power gating controller 'pgc' node, -which, in turn, is expected to contain the following: - -Required properties: - -- reg: Power domain index. Valid values are defined in - include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and - include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc - -- #power-domain-cells: Should be 0 - -Optional properties: - -- power-supply: Power supply used to power the domain -- clocks: a number of phandles to clocks that need to be enabled during - domain power-up sequencing to ensure reset propagation into devices - located inside this power domain - -Example: - - gpc: gpc@303a0000 { - compatible = "fsl,imx7d-gpc"; - reg = <0x303a0000 0x1000>; - interrupt-controller; - interrupts = ; - #interrupt-cells = <3>; - interrupt-parent = <&intc>; - - pgc { - #address-cells = <1>; - #size-cells = <0>; - - pgc_pcie_phy: power-domain@1 { - #power-domain-cells = <0>; - - reg = <1>; - power-supply = <®_1p0d>; - }; - }; - }; - - -Specifying power domain for IP modules -====================================== - -IP cores belonging to a power domain should contain a 'power-domains' -property that is a phandle for PGC node representing the domain. - -Example of a device that is part of the PCIE_PHY power domain: - - pcie: pcie@33800000 { - reg = <0x33800000 0x4000>, - <0x4ff00000 0x80000>; - /* ... */ - power-domains = <&pgc_pcie_phy>; - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml new file mode 100644 index 000000000000..bde09a0b2da3 --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX General Power Controller v2 + +maintainers: + - Andrey Smirnov + +description: | + The i.MX7S/D General Power Control (GPC) block contains Power Gating + Control (PGC) for various power domains. + + Power domains contained within GPC node are generic power domain + providers, documented in + Documentation/devicetree/bindings/power/power-domain.yaml, which are + described as subnodes of the power gating controller 'pgc' node. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle for PGC node representing the domain. + +properties: + compatible: + enum: + - fsl,imx7d-gpc + - fsl,imx8mq-gpc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + pgc: + type: object + description: list of power domains provided by this controller. + + patternProperties: + "power-domain@[0-9]$": + type: object + properties: + + '#power-domain-cells': + const: 0 + + reg: + description: | + Power domain index. Valid values are defined in + include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and + include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing to ensure reset propagation into devices located + inside this power domain. + minItems: 1 + maxItems: 5 + + power-supply: true + + required: + - '#power-domain-cells' + - reg + +required: + - compatible + - reg + - interrupts + - pgc + +additionalProperties: false + +examples: + - | + #include + + gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x1000>; + interrupts = ; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi_phy: power-domain@0 { + #power-domain-cells = <0>; + reg = <0>; + power-supply = <®_1p0d>; + }; + + pgc_pcie_phy: power-domain@1 { + #power-domain-cells = <0>; + reg = <1>; + power-supply = <®_1p0d>; + }; + + pgc_hsic_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = <2>; + power-supply = <®_1p2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index ba605310abeb..8058955fb3b9 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -23,6 +23,7 @@ properties: - qcom,sc7180-rpmhpd - qcom,sdm845-rpmhpd - qcom,sm8150-rpmhpd + - qcom,sm8250-rpmhpd '#power-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml index 078b2cb40fe3..60a23b3beb40 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -18,6 +18,7 @@ properties: compatible: items: - enum: + - renesas,r8a7742-apmu # RZ/G1H - renesas,r8a7743-apmu # RZ/G1M - renesas,r8a7744-apmu # RZ/G1N - renesas,r8a7745-apmu # RZ/G1E diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml index e59331e1d944..55b6ab2d8784 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -17,6 +17,7 @@ description: properties: compatible: enum: + - renesas,r8a7742-sysc # RZ/G1H - renesas,r8a7743-sysc # RZ/G1M - renesas,r8a7744-sysc # RZ/G1N - renesas,r8a7745-sysc # RZ/G1E diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt deleted file mode 100644 index 22f1c3d8b773..000000000000 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt +++ /dev/null @@ -1,27 +0,0 @@ -Freescale i.MX PWM controller - -Required properties: -- compatible : should be "fsl,-pwm" and one of the following - compatible strings: - - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1 - - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27 -- reg: physical base address and length of the controller's registers -- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml - in this directory for a description of the cells format. -- clocks : Clock specifiers for both ipg and per clocks. -- clock-names : Clock names should include both "ipg" and "per" -See the clock consumer binding, - Documentation/devicetree/bindings/clock/clock-bindings.txt -- interrupts: The interrupt for the pwm controller - -Example: - -pwm1: pwm@53fb4000 { - #pwm-cells = <3>; - compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; - reg = <0x53fb4000 0x4000>; - clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; - clock-names = "ipg", "per"; - interrupts = <61>; -}; diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml new file mode 100644 index 000000000000..4b62af27d4b3 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/imx-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX PWM controller + +maintainers: + - Philipp Zabel + +properties: + "#pwm-cells": + description: | + Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml + in this directory for a description of the cells format. + enum: + - 2 + - 3 + + compatible: + enum: + - fsl,imx1-pwm + - fsl,imx27-pwm + + reg: + maxItems: 1 + + clocks: + items: + - description: SoC PWM ipg clock + - description: SoC PWM per clock + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + maxItems: 2 + + interrupts: + maxItems: 1 + +required: + - "#pwm-cells" + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include + + pwm@53fb4000 { + #pwm-cells = <3>; + compatible = "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, + <&clks IMX5_CLK_PWM1_HF_GATE>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt deleted file mode 100644 index 5bf20950a24e..000000000000 --- a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt +++ /dev/null @@ -1,22 +0,0 @@ -Freescale i.MX TPM PWM controller - -Required properties: -- compatible : Should be "fsl,imx7ulp-pwm". -- reg: Physical base address and length of the controller's registers. -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format. -- clocks : The clock provided by the SoC to drive the PWM. -- interrupts: The interrupt for the PWM controller. - -Note: The TPM counter and period counter are shared between multiple channels, so all channels -should use same period setting. - -Example: - -tpm4: pwm@40250000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x40250000 0x1000>; - assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; - clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; - #pwm-cells = <3>; -}; diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml new file mode 100644 index 000000000000..fe9ef42544f1 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/imx-tpm-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX TPM PWM controller + +maintainers: + - Anson Huang + +description: | + The TPM counter and period counter are shared between multiple + channels, so all channels should use same period setting. + +properties: + "#pwm-cells": + const: 3 + + compatible: + enum: + - fsl,imx7ulp-pwm + + reg: + maxItems: 1 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#pwm-cells" + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include + + pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt deleted file mode 100644 index a1b8a482f873..000000000000 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ /dev/null @@ -1,17 +0,0 @@ -Freescale MXS PWM controller - -Required properties: -- compatible: should be "fsl,imx23-pwm" -- reg: physical base address and length of the controller's registers -- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of - the cells format. -- fsl,pwm-number: the number of PWM devices - -Example: - -pwm: pwm@80064000 { - compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 0x2000>; - #pwm-cells = <3>; - fsl,pwm-number = <8>; -}; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml new file mode 100644 index 000000000000..da68f4a25dd9 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/mxs-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS PWM controller + +maintainers: + - Shawn Guo + - Anson Huang + +properties: + compatible: + enum: + - fsl,imx23-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + + fsl,pwm-number: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the number of PWM devices + +required: + - compatible + - reg + - "#pwm-cells" + - fsl,pwm-number + +additionalProperties: false + +examples: + - | + pwm@80064000 { + compatible = "fsl,imx23-pwm"; + reg = <0x80064000 0x2000>; + #pwm-cells = <3>; + fsl,pwm-number = <8>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index ea7f32905172..fc799b0577d4 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -49,17 +49,17 @@ properties: are available. oneOf: - items: - - const: timers + - const: timers - items: - - const: timers - - const: pwm-tclk0 + - const: timers + - const: pwm-tclk0 - items: - - const: timers - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk1 - items: - - const: timers - - const: pwm-tclk0 - - const: pwm-tclk1 + - const: timers + - const: pwm-tclk0 + - const: pwm-tclk1 interrupts: description: @@ -78,12 +78,11 @@ properties: A list of PWM channels used as PWM outputs on particular platform. It is an array of up to 5 elements being indices of PWM channels (from 0 to 4), the order does not matter. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - uniqueItems: true - - items: - minimum: 0 - maximum: 4 + $ref: /schemas/types.yaml#/definitions/uint32-array + uniqueItems: true + items: + minimum: 0 + maximum: 4 required: - clocks diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml index 945c14e1be35..461afb4c1f5d 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml @@ -68,7 +68,7 @@ examples: pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; - reg = <0 0xe6e30000 0 0x8>; + reg = <0xe6e30000 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 523>; diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt deleted file mode 100644 index 69bf41949b01..000000000000 --- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt +++ /dev/null @@ -1,18 +0,0 @@ -Cirrus Logic Arizona class audio SoCs - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -This document lists regulator specific bindings, see the primary binding -document: - For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt - For Cirrus Logic Madera codecs: ../mfd/madera.txt - -Optional properties: - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA - -Optional subnodes: - - ldo1 : Initial data for the LDO1 regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt - - micvdd : Initial data for the MICVDD regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt deleted file mode 100644 index 91974e6ee251..000000000000 --- a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt +++ /dev/null @@ -1,82 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the regulator portion -of the driver. - -Also see these documents for generic binding information: - [1] Regulator: ../regulator/regulator.txt - -This binding must be part of the Lochnagar MFD binding: - [2] ../mfd/cirrus,lochnagar.txt - -Optional sub-nodes: - - - VDDCORE : Initialisation data for the VDDCORE regulator, which - supplies the CODECs digital core if it has no build regulator for that - purpose. - Required Properties: - - compatible : One of the following strings: - "cirrus,lochnagar2-vddcore" - - SYSVDD-supply: Primary power supply for the Lochnagar. - - - MICVDD : Initialisation data for the MICVDD regulator, which - supplies the CODECs MICVDD. - Required Properties: - - compatible : One of the following strings: - "cirrus,lochnagar2-micvdd" - - SYSVDD-supply: Primary power supply for the Lochnagar. - - - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies. - Required Properties: - - compatible : One of the following strings: - "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd" - Optional Properties: - - cirrus,micbias-input : A property selecting which of the CODEC - minicard micbias outputs should be used, valid values are 1 - 4. - - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the - MICxVDD outputs, supplying the digital microphones, normally - supplied from the attached CODEC. - - - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the - CODECs analog and 1.8V digital supplies. - Required Properties: - - compatible : Should be set to "regulator-fixed" - - regulator-min-microvolt : Should be set to 1.8V - - regulator-max-microvolt : Should be set to 1.8V - - regulator-boot-on - - regulator-always-on - - vin-supply : Should be set to same supply as SYSVDD - -Example: - -lochnagar { - lochnagar-micvdd: MICVDD { - compatible = "cirrus,lochnagar2-micvdd"; - - SYSVDD-supply = <&wallvdd>; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - lochnagar-vdd1v8: VDD1V8 { - compatible = "regulator-fixed"; - - regulator-name = "VDD1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - - vin-supply = <&wallvdd>; - }; -}; - diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index 9d3b28417fb6..605590384b48 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -46,24 +46,22 @@ properties: 0: LOW 1: HIGH Default is LOW if nothing else is specified. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 8 - items: - enum: [ 0, 1 ] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0 states: description: Selection of available voltages/currents provided by this regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - maxItems: 8 - items: - items: - - description: Voltage in microvolts - - description: GPIO group state value + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value startup-delay-us: description: startup time in microseconds @@ -81,12 +79,11 @@ properties: regulator-type: description: Specifies what is being regulated. - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: - - voltage - - current - default: voltage + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 3b019fa6db31..90727fdc1283 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -27,13 +27,11 @@ properties: patternProperties: "^buck[1-4]$": - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" type: object "^ldo[1-4]$": - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index ae6e7ab36c58..12b8963615c3 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -21,17 +21,16 @@ properties: regulators: type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# + description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] properties: mps,switch-freq: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value @@ -40,32 +39,27 @@ properties: patternProperties: "^ldo[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^ldortc$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^buck[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# properties: mps,buck-softstart: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270deg diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 91a39a33000b..ec505dbbf87c 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -123,9 +123,8 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkage diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 1e52dafcb5c9..5ce587fff961 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single LDO regulator. + $ref: regulator.yaml# properties: regulator-name: @@ -39,10 +38,9 @@ patternProperties: "^BUCK[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single BUCK regulator. + $ref: regulator.yaml# properties: regulator-name: @@ -51,40 +49,36 @@ patternProperties: should be "buck1", ..., "buck7" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-lpsr-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 # Supported default DVS states: # buck | run | idle | suspend | lpsr diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index 543d4b52397e..19d9408d9c3b 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -30,8 +30,7 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: Properties for single LDO regulator. @@ -45,8 +44,7 @@ patternProperties: "^BUCK[1-8]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: Properties for single BUCK regulator. @@ -57,28 +55,25 @@ patternProperties: should be "buck1", ..., "buck8" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index 64f1183ce841..cb336b2c16af 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -23,8 +23,7 @@ properties: - st,stm32mp1-booster st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: phandle to system configuration controller. vdda-supply: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index 8d8f38fe85dc..e6322bc3e447 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -26,8 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml new file mode 100644 index 000000000000..a0aea73bf412 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona/Madera class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + + This document lists regulator specific bindings, see the primary binding + document. For Wolfson Microelectronic Arizona codecs ../mfd/wlf,arizona.yaml + and for Cirrus Logic Madera codecs ../mfd/madera.txt + +properties: + wlf,ldoena: + description: + GPIO specifier for the GPIO controlling LDOENA. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + maxItems: 1 + + ldo1: + description: + Initial data for the LDO1 regulator. + $ref: "regulator.yaml#" + type: object + + micvdd: + description: + Initial data for the MICVDD regulator. + $ref: "regulator.yaml#" + type: object diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index c0d83865e933..4ffa25268fcc 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -25,25 +25,23 @@ properties: maxItems: 3 resets: - maxItems: 1 + maxItems: 1 st,syscfg-holdboot: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: remote processor reset hold boot - Phandle of syscon block. - The offset of the hold boot setting register. - The field mask of the hold boot. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 st,syscfg-tz: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Reference to the system configuration which holds the RCC trust zone mode - Phandle of syscon block. - The offset of the RCC trust zone mode register. - The field mask of the RCC trust zone mode. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 interrupts: @@ -90,8 +88,7 @@ properties: (see ../reserved-memory/reserved-memory.txt) st,syscfg-pdds: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote 1st cell: phandle to syscon block diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt index bac4afa3b197..4dd20de6977f 100644 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt @@ -77,6 +77,8 @@ Regions in the /reserved-memory node may be referenced by other device nodes by adding a memory-region property to the device node. memory-region (optional) - phandle, specifier pairs to children of /reserved-memory +memory-region-names (optional) - a list of names, one for each corresponding + entry in the memory-region property Example ------- diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml index 512a33bdb208..dfce6738b033 100644 --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml @@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: BCM7216 RESCAL reset controller -description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216. +description: This document describes the BCM7216 RESCAL reset controller + which is responsible for controlling the reset of the SATA and PCIe0/1 + instances on BCM7216. maintainers: - Florian Fainelli diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt index c2489e41a801..e10502d9153e 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt @@ -9,6 +9,8 @@ Required properties: - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon" + - For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon" + - For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon" - reg: should be register base and length as documented in the datasheet - interrupts: Should contain SRC interrupt @@ -49,4 +51,6 @@ Example: For list of all valid reset indices see for i.MX7, for i.MX8MQ and - for i.MX8MM + for i.MX8MM and + for i.MX8MN and + for i.MX8MP diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 8ac437282659..6b2d56cc3f38 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -21,8 +21,7 @@ properties: intel,global-reset: description: Global reset register offset and bit offset. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: Register offset - description: Register bit offset diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml index b5de1d196a13..4c2b429ac702 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -23,6 +23,7 @@ description: | properties: compatible: enum: + - renesas,r8a7742-rst # RZ/G1H - renesas,r8a7743-rst # RZ/G1M - renesas,r8a7744-rst # RZ/G1N - renesas,r8a7745-rst # RZ/G1E diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 04819ad379c2..f80ba2c66f71 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -40,24 +40,18 @@ properties: and identifies the type of the hart. mmu-type: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - riscv,sv32 - - riscv,sv39 - - riscv,sv48 description: Identifies the MMU address translation mode used on this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48 riscv,isa: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - rv64imac - - rv64imafdc description: Identifies the specific RISC-V instruction set architecture supported by the hart. These are documented in the RISC-V @@ -67,6 +61,10 @@ properties: While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - rv64imac + - rv64imafdc # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml index b95cb017f469..eff9df4b856a 100644 --- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml @@ -43,6 +43,9 @@ properties: items: enum: [ fck, rtc_x1, rtc_x3, extal ] + power-domains: + maxItems: 1 + required: - compatible - reg @@ -50,6 +53,7 @@ required: - interrupt-names - clocks - clock-names + - power-domains additionalProperties: false @@ -68,5 +72,6 @@ examples: interrupt-names = "alarm", "period", "carry"; clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>, <&rtc_x3_clk>, <&extal_clk>; + power-domains = <&cpg_clocks>; clock-names = "fck", "rtc_x1", "rtc_x3", "extal"; }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt deleted file mode 100644 index 5bcd31d995b0..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Real Time Clock of the i.MX SoCs - -RTC controller for the i.MX SoCs - -Required properties: -- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc". -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: IRQ line for the RTC. -- clocks: should contain two entries: - * one for the input reference - * one for the the SoC RTC -- clock-names: should contain: - * "ref" for the input reference clock - * "ipg" for the SoC RTC clock - -Example: - -rtc@10007000 { - compatible = "fsl,imx21-rtc"; - reg = <0x10007000 0x1000>; - interrupts = <22>; - clocks = <&clks IMX27_CLK_CKIL>, - <&clks IMX27_CLK_RTC_IPG_GATE>; - clock-names = "ref", "ipg"; -}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml new file mode 100644 index 000000000000..4f263fa6fd0d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/rtc-mxc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Real Time Clock of the i.MX SoCs + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Philippe Reynes + +properties: + compatible: + enum: + - fsl,imx1-rtc + - fsl,imx21-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: input reference + - description: the SoC RTC clock + + clock-names: + items: + - const: ref + - const: ipg + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + rtc@10007000 { + compatible = "fsl,imx21-rtc"; + reg = <0x10007000 0x1000>; + interrupts = <22>; + clocks = <&clks IMX27_CLK_CKIL>, + <&clks IMX27_CLK_RTC_IPG_GATE>; + clock-names = "ref", "ipg"; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt deleted file mode 100644 index 79d7e87b0d91..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt +++ /dev/null @@ -1,17 +0,0 @@ -* i.MX53 Secure Real Time Clock (SRTC) - -Required properties: -- compatible: should be: "fsl,imx53-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- clocks: should contain the phandle for the rtc clock -- interrupts: rtc alarm interrupt - -Example: - -rtc@53fa4000 { - compatible = "fsl,imx53-rtc"; - reg = <0x53fa4000 0x4000>; - interrupts = <24>; - clocks = <&clks IMX5_CLK_SRTC_GATE>; -}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml new file mode 100644 index 000000000000..2d1a30663d72 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/rtc-mxc_v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX53 Secure Real Time Clock (SRTC) + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Patrick Bruenn + +properties: + compatible: + enum: + - fsl,imx53-rtc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include + + rtc@53fa4000 { + compatible = "fsl,imx53-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; + }; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 48c6cafca90c..5456604b1c14 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -32,16 +32,15 @@ properties: maxItems: 1 st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 description: | - Phandle/offset/mask triplet. The phandle to pwrcfg used to - access control register at offset, and change the dbp (Disable Backup - Protection) bit represented by the mask, mandatory to disable/enable backup - domain (RTC registers) write protection. + Phandle/offset/mask triplet. The phandle to pwrcfg used to + access control register at offset, and change the dbp (Disable Backup + Protection) bit represented by the mask, mandatory to disable/enable backup + domain (RTC registers) write protection. assigned-clocks: description: | @@ -78,14 +77,14 @@ allOf: const: st,stm32h7-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - required: - - clock-names - - st,syscfg + required: + - clock-names + - st,syscfg - if: properties: @@ -94,16 +93,16 @@ allOf: const: st,stm32mp1-rtc then: - properties: - clocks: - minItems: 2 - maxItems: 2 + properties: + clocks: + minItems: 2 + maxItems: 2 - assigned-clocks: false - assigned-clock-parents: false + assigned-clocks: false + assigned-clock-parents: false - required: - - clock-names + required: + - clock-names required: - compatible diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt deleted file mode 100644 index 55700f20f6ee..000000000000 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ /dev/null @@ -1,100 +0,0 @@ -* UART (Universal Asynchronous Receiver/Transmitter) - -Required properties: -- compatible : one of: - - "ns8250" - - "ns16450" - - "ns16550a" - - "ns16550" - - "ns16750" - - "ns16850" - - For Tegra20, must contain "nvidia,tegra20-uart" - - For other Tegra, must contain '"nvidia,-uart", - "nvidia,tegra20-uart"' where is tegra30, tegra114, tegra124, - tegra132, or tegra210. - - "nxp,lpc3220-uart" - - "ralink,rt2880-uart" - - For MediaTek BTIF, must contain '"mediatek,-btif", - "mediatek,mtk-btif"' where is mt7622, mt7623. - - "altr,16550-FIFO32" - - "altr,16550-FIFO64" - - "altr,16550-FIFO128" - - "fsl,16550-FIFO64" - - "fsl,ns16550" - - "intel,xscale-uart" - - "ti,da830-uart" - - "aspeed,ast2400-vuart" - - "aspeed,ast2500-vuart" - - "nuvoton,npcm750-uart" - - "serial" if the port type is unknown. -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clock-frequency : the input clock frequency for the UART - or - clocks phandle to refer to the clk used as per Documentation/devicetree - /bindings/clock/clock-bindings.txt - -Optional properties: -- current-speed : the current active speed of the UART. -- reg-offset : offset to apply to the mapbase from the start of the registers. -- reg-shift : quantity to shift the register offsets by. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. There are some systems that require 32-bit - accesses to the UART (e.g. TI davinci). -- used-by-rtas : set to indicate that the port is in use by the OpenFirmware - RTAS and should not be registered. -- no-loopback-test: set to indicate that the port does not implements loopback - test mode -- fifo-size: the fifo size of the UART. -- auto-flow-control: one way to enable automatic flow control support. The - driver is allowed to detect support for the capability even without this - property. -- tx-threshold: Specify the TX FIFO low water indication for parts with - programmable TX FIFO thresholds. -- resets : phandle + reset specifier pairs -- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD - line respectively. It will use specified GPIO instead of the peripheral - function pin for the UART feature. If unsure, don't specify this property. -- aspeed,sirq-polarity-sense: Only applicable to aspeed,ast2500-vuart. - phandle to aspeed,ast2500-scu compatible syscon alongside register offset - and bit number to identify how the SIRQ polarity should be configured. - One possible data source is the LPC/eSPI mode bit. - Example: aspeed,sirq-polarity-sense = <&syscon 0x70 25> - -Note: -* fsl,ns16550: - ------------ - Freescale DUART is very similar to the PC16552D (and to a - pair of NS16550A), albeit with some nonstandard behavior such as - erratum A-004737 (relating to incorrect BRK handling). - - Represents a single port that is compatible with the DUART found - on many Freescale chips (examples include mpc8349, mpc8548, - mpc8641d, p4080 and ls2085a). - -Example: - - uart@80230000 { - compatible = "ns8250"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - }; - -Example for OMAP UART using GPIO-based modem control signals: - - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; - dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml new file mode 100644 index 000000000000..c1d4c196f005 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -0,0 +1,233 @@ +# Copyright 2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UART (Universal Asynchronous Receiver/Transmitter) bindings + +maintainers: + - devicetree@vger.kernel.org + +allOf: + - $ref: /schemas/serial.yaml# + - if: + required: + - aspeed,sirq-polarity-sense + then: + properties: + compatible: + const: aspeed,ast2500-vuart + - if: + properties: + compatible: + const: mrvl,mmp-uart + then: + properties: + reg-shift: + const: 2 + required: + - reg-shift + - if: + not: + properties: + compatible: + items: + - enum: + - ns8250 + - ns16450 + - ns16550 + - ns16550a + then: + anyOf: + - required: [ clock-frequency ] + - required: [ clocks ] + +properties: + compatible: + oneOf: + - const: ns8250 + - const: ns16450 + - const: ns16550 + - const: ns16550a + - const: ns16850 + - const: aspeed,ast2400-vuart + - const: aspeed,ast2500-vuart + - const: intel,xscale-uart + - const: mrvl,pxa-uart + - const: nuvoton,npcm750-uart + - const: nvidia,tegra20-uart + - const: nxp,lpc3220-uart + - items: + - enum: + - altr,16550-FIFO32 + - altr,16550-FIFO64 + - altr,16550-FIFO128 + - fsl,16550-FIFO64 + - fsl,ns16550 + - andestech,uart16550 + - nxp,lpc1850-uart + - opencores,uart16550-rtlsvn105 + - ti,da830-uart + - const: ns16550a + - items: + - enum: + - ns16750 + - cavium,octeon-3860-uart + - xlnx,xps-uart16550-2.00.b + - ralink,rt2880-uart + - enum: + - ns16550 # Deprecated, unless the FIFO really is broken + - ns16550a + - items: + - enum: + - ralink,mt7620a-uart + - ralink,rt3052-uart + - ralink,rt3883-uart + - const: ralink,rt2880-uart + - enum: + - ns16550 # Deprecated, unless the FIFO really is broken + - ns16550a + - items: + - enum: + - mediatek,mt7622-btif + - mediatek,mt7623-btif + - const: mediatek,mtk-btif + - items: + - enum: + - mediatek,mt7622-btif + - mediatek,mt7623-btif + - const: mediatek,mtk-btif + - items: + - const: mrvl,mmp-uart + - const: intel,xscale-uart + - items: + - enum: + - nvidia,tegra30-uart + - nvidia,tegra114-uart + - nvidia,tegra124-uart + - nvidia,tegra186-uart + - nvidia,tegra194-uart + - nvidia,tegra210-uart + - const: nvidia,tegra20-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: true + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + current-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: The current active speed of the UART. + + reg-offset: + description: | + Offset to apply to the mapbase from the start of the registers. + + reg-shift: + description: Quantity to shift the register offsets by. + + reg-io-width: + description: | + The size (in bytes) of the IO accesses that should be performed on the + device. There are some systems that require 32-bit accesses to the + UART (e.g. TI davinci). + + used-by-rtas: + type: boolean + description: | + Set to indicate that the port is in use by the OpenFirmware RTAS and + should not be registered. + + no-loopback-test: + type: boolean + description: | + Set to indicate that the port does not implement loopback test mode. + + fifo-size: + $ref: /schemas/types.yaml#definitions/uint32 + description: The fifo size of the UART. + + auto-flow-control: + type: boolean + description: | + One way to enable automatic flow control support. The driver is + allowed to detect support for the capability even without this + property. + + tx-threshold: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Specify the TX FIFO low water indication for parts with programmable + TX FIFO thresholds. + + overrun-throttle-ms: + description: | + How long to pause uart rx when input overrun is encountered. + + rts-gpios: true + cts-gpios: true + dtr-gpios: true + dsr-gpios: true + rng-gpios: true + dcd-gpios: true + + aspeed,sirq-polarity-sense: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Phandle to aspeed,ast2500-scu compatible syscon alongside register + offset and bit number to identify how the SIRQ polarity should be + configured. One possible data source is the LPC/eSPI mode bit. Only + applicable to aspeed,ast2500-vuart. + +required: + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + serial@80230000 { + compatible = "ns8250"; + reg = <0x80230000 0x100>; + interrupts = <10>; + reg-shift = <2>; + clock-frequency = <48000000>; + }; + - | + #include + serial@49042000 { + compatible = "andestech,uart16550", "ns16550a"; + reg = <0x49042000 0x400>; + interrupts = <80>; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + - | + #include + serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_APB>; + no-loopback-test; + aspeed,sirq-polarity-sense = <&syscon 0x70 25>; + }; + +... diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index d4178ab0d675..75ebc9952a99 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -24,18 +24,18 @@ properties: oneOf: - description: Always-on power domain UART controller items: - - enum: + - enum: + - amlogic,meson6-uart + - amlogic,meson8-uart + - amlogic,meson8b-uart + - amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart + - description: Everything-Else power domain UART controller + enum: - amlogic,meson6-uart - amlogic,meson8-uart - amlogic,meson8b-uart - amlogic,meson-gx-uart - - const: amlogic,meson-ao-uart - - description: Everything-Else power domain UART controller - enum: - - amlogic,meson6-uart - - amlogic,meson8-uart - - amlogic,meson8b-uart - - amlogic,meson-gx-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt deleted file mode 100644 index 24ed8769f4af..000000000000 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Ingenic SoC UART - -Required properties: -- compatible : One of: - - "ingenic,jz4740-uart", - - "ingenic,jz4760-uart", - - "ingenic,jz4770-uart", - - "ingenic,jz4775-uart", - - "ingenic,jz4780-uart", - - "ingenic,x1000-uart". -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clocks : phandles to the module & baud clocks. -- clock-names: tuple listing input clock names. - Required elements: "baud", "module" - -Example: - -uart0: serial@10030000 { - compatible = "ingenic,jz4740-uart"; - reg = <0x10030000 0x100>; - - interrupt-parent = <&intc>; - interrupts = <9>; - - clocks = <&ext>, <&cgu JZ4740_CLK_UART0>; - clock-names = "baud", "module"; -}; diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml new file mode 100644 index 000000000000..c023d650e9c1 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/ingenic,uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs UART controller devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + $nodename: + pattern: "^serial@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4740-uart + - ingenic,jz4760-uart + - ingenic,jz4780-uart + - ingenic,x1000-uart + - items: + - enum: + - ingenic,jz4770-uart + - ingenic,jz4775-uart + - const: ingenic,jz4760-uart + - items: + - const: ingenic,jz4725b-uart + - const: ingenic,jz4740-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Baud clock + - description: UART module clock + + clock-names: + items: + - const: baud + - const: module + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +examples: + - | + #include + #include + #include + serial@10032000 { + compatible = "ingenic,jz4780-uart"; + reg = <0x10032000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <49>; + + clocks = <&ext>, <&cgu JZ4780_CLK_UART2>; + clock-names = "baud", "module"; + + dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>, + <&dma JZ4780_DMA_UART2_TX 0xffffffff>; + dma-names = "rx", "tx"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt deleted file mode 100644 index d744340de887..000000000000 --- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt +++ /dev/null @@ -1,4 +0,0 @@ -PXA UART controller - -Required properties: -- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart". diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 1a64d59152aa..c23c93b400f0 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -88,17 +88,15 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 3000 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3000 required: - compatible diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt deleted file mode 100644 index 7d65126bd1d7..000000000000 --- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Qualcomm Atheros AR9330 High-Speed UART - -Required properties: - -- compatible: Must be "qca,ar9330-uart" - -- reg: Specifies the physical base address of the controller and - the length of the memory mapped region. - -- interrupts: Specifies the interrupt source of the parent interrupt - controller. The format of the interrupt specifier depends on the - parent interrupt controller. - -Additional requirements: - - Each UART port must have an alias correctly numbered in "aliases" - node. - -Example: - - aliases { - serial0 = &uart0; - }; - - uart0: uart@18020000 { - compatible = "qca,ar9330-uart"; - reg = <0x18020000 0x14>; - - interrupt-parent = <&intc>; - interrupts = <3>; - }; diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml new file mode 100644 index 000000000000..a344369285b6 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/qca,ar9330-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR9330 High-Speed UART + +maintainers: + - Oleksij Rempel + +allOf: + - $ref: /schemas/serial.yaml# + +properties: + compatible: + const: qca,ar9330-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: uart + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + serial@18020000 { + compatible = "qca,ar9330-uart"; + reg = <0x18020000 0x14>; + clocks = <&ref>; + clock-names = "uart"; + interrupt-parent = <&intc>; + interrupts = <3>; + }; +... diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml new file mode 100644 index 000000000000..82aefdb0d45e --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,em-uart.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas EMMA Mobile UART Interface + +maintainers: + - Magnus Damm + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: renesas,em-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: sclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + uart0: serial@e1020000 { + compatible = "renesas,em-uart"; + reg = <0xe1020000 0x38>; + interrupts = ; + clocks = <&usia_u0_sclk>; + clock-names = "sclk"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 91101521ef07..6b04c0451d41 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -24,6 +24,7 @@ properties: - items: - enum: + - renesas,hscif-r8a7742 # RZ/G1H - renesas,hscif-r8a7743 # RZ/G1M - renesas,hscif-r8a7744 # RZ/G1N - renesas,hscif-r8a7745 # RZ/G1E diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 70392b9bd977..570b379f9f19 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -33,6 +33,7 @@ properties: - items: - enum: + - renesas,scif-r8a7742 # RZ/G1H - renesas,scif-r8a7743 # RZ/G1M - renesas,scif-r8a7744 # RZ/G1N - renesas,scif-r8a7745 # RZ/G1E diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml index b28bcb268854..78b8e20dd34d 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -24,13 +24,14 @@ properties: - items: - enum: - - renesas,scifa-r8a7743 # R8A7743 RZ/G1M - - renesas,scifa-r8a7744 # R8A7744 RZ/G1N - - renesas,scifa-r8a7745 # R8A7745 RZ/G1E - - renesas,scifa-r8a7790 # R8A7790 R-Car H2 - - renesas,scifa-r8a7791 # R8A7791 R-Car M2-W - - renesas,scifa-r8a7793 # R8A7793 R-Car M2-N - - renesas,scifa-r8a7794 # R8A7794 R-Car E2 + - renesas,scifa-r8a7742 # RZ/G1H + - renesas,scifa-r8a7743 # RZ/G1M + - renesas,scifa-r8a7744 # RZ/G1N + - renesas,scifa-r8a7745 # RZ/G1E + - renesas,scifa-r8a7790 # R-Car H2 + - renesas,scifa-r8a7791 # R-Car M2-W + - renesas,scifa-r8a7793 # R-Car M2-N + - renesas,scifa-r8a7794 # R-Car E2 - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1 - const: renesas,scifa # generic SCIFA compatible UART diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml index 57205cb1dcd4..b083970c16a9 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -24,6 +24,7 @@ properties: - items: - enum: + - renesas,scifb-r8a7742 # RZ/G1H - renesas,scifb-r8a7743 # RZ/G1M - renesas,scifb-r8a7744 # RZ/G1N - renesas,scifb-r8a7745 # RZ/G1E diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index d4beaf11222d..8141e4aad530 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -6,40 +6,39 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: RS485 serial communications Bindings -description: The RTS signal is capable of automatically controlling - line direction for the built-in half-duplex mode. - The properties described hereafter shall be given to a - half-duplex capable UART node. +description: The RTS signal is capable of automatically controlling line + direction for the built-in half-duplex mode. The properties described + hereafter shall be given to a half-duplex capable UART node. maintainers: - - Rob Herring + - Rob Herring properties: rs485-rts-delay: description: prop-encoded-array - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - items: - - description: - Delay between rts signal and beginning of data sent in milliseconds. - It corresponds to the delay before sending data. - default: 0 - maximum: 1000 - - description: - Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release of the line. - default: 0 - maximum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + items: + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 1000 + - description: Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release + of the line. + default: 0 + maximum: 1000 rs485-rts-active-low: description: drive RTS low when sending (default is high). $ref: /schemas/types.yaml#/definitions/flag linux,rs485-enabled-at-boot-time: - description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl. + description: enables the rs485 feature at boot time. It can be disabled + later with proper ioctl. $ref: /schemas/types.yaml#/definitions/flag rs485-rx-during-tx: - description: enables the receiving of data even while sending data. - $ref: /schemas/types.yaml#/definitions/flag + description: enables the receiving of data even while sending data. + $ref: /schemas/types.yaml#/definitions/flag +... diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 9d2ce347875b..ff2f49fe322c 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -51,9 +51,8 @@ properties: samsung,uart-fifosize: description: The fifo size supported by the UART channel. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [16, 64, 256] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [16, 64, 256] required: - compatible diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 53204d90d0c7..8645d0e526b4 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -67,6 +67,14 @@ properties: (wired and enabled by pinmux configuration). This depends on both the UART hardware and the board wiring. + rx-tx-swap: + type: boolean + description: RX and TX pins are swapped. + + cts-rts-swap: + type: boolean + description: CTS and RTS pins are swapped. + if: required: - uart-has-rtscts diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml index e8d3aeda1202..92283f693de0 100644 --- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml +++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml @@ -55,7 +55,7 @@ examples: compatible = "sifive,fu540-c000-uart", "sifive,uart0"; interrupt-parent = <&plic0>; interrupts = <80>; - reg = <0x0 0x10010000 0x0 0x1000>; + reg = <0x10010000 0x1000>; clocks = <&prci PRCI_CLK_TLCLK>; }; diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index cb008fd188d8..02b2d5ba01d6 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -26,11 +26,11 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,meson8-canvas - - amlogic,meson8b-canvas - - amlogic,meson8m2-canvas - - const: amlogic,canvas + - enum: + - amlogic,meson8-canvas + - amlogic,meson8b-canvas + - amlogic,meson8m2-canvas + - const: amlogic,canvas - const: amlogic,canvas # GXBB and newer SoCs reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt index 4fc571e78f01..953add19e937 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt @@ -19,6 +19,7 @@ power-domains. "qcom,sc7180-aoss-qmp" "qcom,sdm845-aoss-qmp" "qcom,sm8150-aoss-qmp" + "qcom,sm8250-aoss-qmp" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt index f8fa71f5d84b..2e2f6dc351c0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt @@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP. compatible = "qcom,apr-v2"; qcom,apr-domain = ; - q6core@3 { + apr-service@3 { compatible = "qcom,q6core"; reg = ; }; - q6afe@4 { + apr-service@4 { compatible = "qcom,q6afe"; reg = ; dais { #sound-dai-cells = <1>; - hdmi@1 { - reg = <1>; + dai@1 { + reg = ; }; }; }; - q6asm@7 { + apr-service@7 { compatible = "qcom,q6asm"; reg = ; ... }; - q6adm@8 { + apr-service@8 { compatible = "qcom,q6adm"; reg = ; ... @@ -106,26 +106,26 @@ have no such dependency. qcom,glink-channels = "apr_audio_svc"; qcom,apr-domain = ; - q6core { + apr-service@3 { compatible = "qcom,q6core"; reg = ; }; - q6afe: q6afe { + q6afe: apr-service@4 { compatible = "qcom,q6afe"; reg = ; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; ... }; - q6asm: q6asm { + q6asm: apr-service@7 { compatible = "qcom,q6asm"; reg = ; qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd"; ... }; - q6adm: q6adm { + q6adm: apr-service@8 { compatible = "qcom,q6adm"; reg = ; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt deleted file mode 100644 index dab7ca9f250c..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ /dev/null @@ -1,94 +0,0 @@ -Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller - -Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper -is a programmable module for supporting a wide range of serial interfaces -like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial -Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP -Wrapper controller is modeled as a node with zero or more child nodes each -representing a serial engine. - -Required properties: -- compatible: Must be "qcom,geni-se-qup". -- reg: Must contain QUP register address and length. -- clock-names: Must contain "m-ahb" and "s-ahb". -- clocks: AHB clocks needed by the device. - -Required properties if child node exists: -- #address-cells: Must be <1> for Serial Engine Address -- #size-cells: Must be <1> for Serial Engine Address Size -- ranges: Must be present - -Properties for children: - -A GENI based QUP wrapper controller node can contain 0 or more child nodes -representing serial devices. These serial devices can be a QCOM UART, I2C -controller, SPI controller, or some combination of aforementioned devices. -Please refer below the child node definitions for the supported serial -interface protocols. - -Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller - -Required properties: -- compatible: Must be "qcom,geni-i2c". -- reg: Must contain QUP register address and length. -- interrupts: Must contain I2C interrupt. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. -- #address-cells: Must be <1> for I2C device address. -- #size-cells: Must be <0> as I2C addresses have no size component. - -Optional property: -- clock-frequency: Desired I2C bus clock frequency in Hz. - When missing default to 100000Hz. - -Child nodes should conform to I2C bus binding as described in i2c.txt. - -Qualcomm Technologies Inc. GENI Serial Engine based UART Controller - -Required properties: -- compatible: Must be "qcom,geni-debug-uart" or "qcom,geni-uart". -- reg: Must contain UART register location and length. -- interrupts: Must contain UART core interrupts. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. - -Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller -node binding is described in -Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt. - -Example: - geniqup@8c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x8c0000 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - i2c0: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0xa94000 0x4000>; - interrupts = ; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_i2c_5_active>; - pinctrl-1 = <&qup_1_i2c_5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - }; - - uart0: serial@a88000 { - compatible = "qcom,geni-debug-uart"; - reg = <0xa88000 0x7000>; - interrupts = ; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_uart_3_active>; - pinctrl-1 = <&qup_1_uart_3_sleep>; - }; - - } diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml new file mode 100644 index 000000000000..dee8bb2b69fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Mukesh Savaliya + - Akash Asthana + +description: | + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + enum: + - qcom,geni-se-qup + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + clock-names: + items: + - const: m-ahb + - const: s-ahb + + clocks: + items: + - description: Master AHB Clock + - description: Slave AHB Clock + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + interconnects: + maxItems: 1 + + interconnect-names: + const: qup-core + +required: + - compatible + - reg + - clock-names + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + description: Common properties for GENI Serial Engine based I2C, SPI and + UART controller. + + properties: + reg: + description: GENI Serial Engine register address and length. + maxItems: 1 + + clock-names: + const: se + + clocks: + description: Serial engine core clock needed by the device. + maxItems: 1 + + interconnects: + minItems: 2 + maxItems: 3 + + interconnect-names: + minItems: 2 + items: + - const: qup-core + - const: qup-config + - const: qup-memory + + required: + - reg + - clock-names + - clocks + + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + allOf: + - $ref: /spi/spi-controller.yaml# + + properties: + compatible: + enum: + - qcom,geni-spi + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - compatible + - interrupts + - "#address-cells" + - "#size-cells" + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + properties: + compatible: + enum: + - qcom,geni-i2c + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. + default: 100000 + + required: + - compatible + - interrupts + - "#address-cells" + - "#size-cells" + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + allOf: + - $ref: /schemas/serial.yaml# + + properties: + compatible: + enum: + - qcom,geni-uart + - qcom,geni-debug-uart + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: UART core irq + - description: Wakeup irq (RX GPIO) + + required: + - compatible + - interrupts + + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xa94000 0 0x4000>; + interrupts = ; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_i2c_5_active>; + pinctrl-1 = <&qup_1_i2c_5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0xa88000 0 0x7000>; + interrupts = ; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_uart_3_active>; + pinctrl-1 = <&qup_1_uart_3_sleep>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml new file mode 100644 index 000000000000..a1a8423b2e2e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Multicore SoC platforms chipid module + +maintainers: + - Tero Kristo + - Nishanth Menon + +description: | + Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is + represented by CTRLMMR_xxx_JTAGID register which contains information about + SoC id and revision. + +properties: + $nodename: + pattern: "^chipid@[0-9a-f]+$" + + compatible: + items: + - const: ti,am654-chipid + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x43000014 0x4>; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 76ee695097bf..fb78967ee17b 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -35,23 +35,21 @@ properties: adi,decimation-ratio: description: | This property set's the decimation ratio of PDM to PCM audio data. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [64, 32, 16] - default: 64 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [64, 32, 16] + default: 64 adi,pdm-clk-map: description: | The ADAU7118 has two PDM clocks for the four Inputs. Each input must be assigned to one of these two clocks. This property set's the mapping between the clocks and the inputs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 4 - maxItems: 4 - items: - maximum: 1 - default: [0, 0, 1, 1] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + items: + maximum: 1 + default: [0, 0, 1, 1] required: - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index ea1d2efb2aaa..be390accdd07 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -57,32 +57,31 @@ properties: A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. - allOf: - - $ref: /schemas/types.yaml#definitions/non-unique-string-array - - minItems: 2 - maxItems: 18 - items: - enum: - # Audio Pins on the SoC - - HP - - HPCOM - - LINEIN - - LINEOUT - - MIC1 - - MIC2 - - MIC3 + $ref: /schemas/types.yaml#definitions/non-unique-string-array + minItems: 2 + maxItems: 18 + items: + enum: + # Audio Pins on the SoC + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC1 + - MIC2 + - MIC3 - # Microphone Biases from the SoC - - HBIAS - - MBIAS + # Microphone Biases from the SoC + - HBIAS + - MBIAS - # Board Connectors - - Headphone - - Headset Mic - - Line In - - Line Out - - Mic - - Speaker + # Board Connectors + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker allwinner,codec-analog-controls: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index a61bccf915d8..f9344adaf6c2 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -86,7 +86,7 @@ examples: aiu: audio-controller@5400 { compatible = "amlogic,aiu-gxl", "amlogic,aiu"; #sound-dai-cells = <2>; - reg = <0x0 0x5400 0x0 0x2ac>; + reg = <0x5400 0x2ac>; interrupts = , ; interrupt-names = "i2s", "spdif"; @@ -110,4 +110,3 @@ examples: "spdif_mclk_sel"; resets = <&reset RESET_AIU>; }; - diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index f778d3371fde..51a0c30e10f9 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -45,7 +45,7 @@ examples: toacodec: audio-controller@740 { compatible = "amlogic,g12a-toacodec"; - reg = <0x0 0x740 0x0 0x4>; + reg = <0x740 0x4>; #sound-dai-cells = <1>; resets = <&clkc_audio AUD_RESET_TOACODEC>; }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index b7c38c2b5b54..04014e658c90 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -49,10 +49,9 @@ examples: acodec: audio-controller@32000 { compatible = "amlogic,t9015"; - reg = <0x0 0x32000 0x0 0x14>; + reg = <0x32000 0x14>; #sound-dai-cells = <0>; clocks = <&clkc CLKID_AUDIO_CODEC>; clock-names = "pclk"; resets = <&reset RESET_AUDIO_CODEC>; }; - diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt deleted file mode 100644 index 41ae2699f07a..000000000000 --- a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt +++ /dev/null @@ -1,39 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the audio portion -of the driver. - -This binding must be part of the Lochnagar MFD binding: - [4] ../mfd/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar2-soundcard" - - - #sound-dai-cells : Must be set to 1. - - - clocks : Contains an entry for each entry in clock-names. - - clock-names : Must include the following clocks: - "mclk" Master clock source for the sound card, should normally - be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar - clock driver. - -Example: - -lochnagar-sc { - compatible = "cirrus,lochnagar2-soundcard"; - - #sound-dai-cells = <1>; - - clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>; - clock-names = "mclk"; -}; diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..cea612d3d4a7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the audio portion of the + driver. + + This binding must be part of the Lochnagar MFD binding: + [1] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar2-soundcard + + '#sound-dai-cells': + description: + The first cell indicating the audio interface. + const: 1 + + clocks: + description: + Master clock source for the sound card, should normally be set to + LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar clock driver. + maxItems: 1 + + clock-names: + const: mclk + +required: + - compatible + - '#sound-dai-cells' + - clocks + - clock-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml new file mode 100644 index 000000000000..c4cd58b5acd4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,madera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Madera class audio CODECs + +maintainers: + - patches@opensource.cirrus.com + +description: | + This describes audio configuration bindings for these codecs. + + See also the core bindings for the parent MFD driver: + + Documentation/devicetree/bindings/mfd/cirrus,madera.yaml + + and defines for values used in these bindings: + + include/dt-bindings/sound/madera.h + + The properties are all contained in the parent MFD node. + +properties: + '#sound-dai-cells': + description: + The first cell indicating the audio interface. + const: 1 + + cirrus,inmode: + description: + A list of input mode settings for each input. A maximum + of 24 cells, with four cells per input in the order INnAL, + INnAR INnBL INnBR. For non-muxed inputs the first two cells + for that input set the mode for the left and right channel + and the second two cells must be 0. For muxed inputs the + first two cells for that input set the mode of the left and + right A inputs and the second two cells set the mode of the + left and right B inputs. Valid mode values are one of the + MADERA_INMODE_xxx. If the array is shorter than the number + of inputs the unspecified inputs default to MADERA_INMODE_DIFF. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 24 + items: + minimum: 0 + maximum: 1 + default: 0 + + cirrus,out-mono: + description: + Mono bit for each output, maximum of six cells if the array + is shorter outputs will be set to stereo. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 6 + items: + minimum: 0 + maximum: 1 + default: 0 + + cirrus,dmic-ref: + description: | + Indicates how the MICBIAS pins have been externally connected + to DMICs on each input, one cell per input. + + + + A value of 0 indicates MICVDD and is the default, + other values depend on the codec: For CS47L35 one of the + CS47L35_DMIC_REF_xxx values For all other codecs one of + the MADERA_DMIC_REF_xxx values Also see the datasheet for a + description of the INn_DMIC_SUP field. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 6 + items: + minimum: 0 + maximum: 3 + default: 0 + + cirrus,max-channels-clocked: + description: + Maximum number of channels that I2S clocks will be generated + for. Useful when clock master for systems where the I2S bus + has multiple data lines. One cell for each AIF, use a value + of zero for AIFs that should be handled normally. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + default: 0 + + cirrus,pdm-fmt: + description: + PDM speaker data format, must contain 2 cells (OUT5 and + OUT6). See the PDM_SPKn_FMT field in the datasheet for a + description of this value. The second cell is ignored for + codecs that do not have OUT6. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + cirrus,pdm-mute: + description: | + PDM mute format, must contain 2 cells (OUT5 and OUT6). See the + PDM_SPKn_CTRL_1 register in the datasheet for a description + of this value. The second cell is ignored for codecs that + do not have OUT6. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 diff --git a/Documentation/devicetree/bindings/sound/madera.txt b/Documentation/devicetree/bindings/sound/madera.txt deleted file mode 100644 index 5e669ce552f4..000000000000 --- a/Documentation/devicetree/bindings/sound/madera.txt +++ /dev/null @@ -1,67 +0,0 @@ -Cirrus Logic Madera class audio codecs - -This describes audio configuration bindings for these codecs. - -See also the core bindings for the parent MFD driver: -See Documentation/devicetree/bindings/mfd/madera.txt - -and defines for values used in these bindings: -include/dt-bindings/sound/madera.h - -These properties are all contained in the parent MFD node. - -Optional properties: - - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally - connected to DMICs on each input, one cell per input. - - A value of 0 indicates MICVDD and is the default, other values depend on the - codec: - For CS47L35 one of the CS47L35_DMIC_REF_xxx values - For all other codecs one of the MADERA_DMIC_REF_xxx values - Also see the datasheet for a description of the INn_DMIC_SUP field. - - - cirrus,inmode : A list of input mode settings for each input. A maximum of - 16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR. - For non-muxed inputs the first two cells for that input set the mode for - the left and right channel and the second two cells must be 0. - For muxed inputs the first two cells for that input set the mode of the - left and right A inputs and the second two cells set the mode of the left - and right B inputs. - Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter - than the number of inputs the unspecified inputs default to - MADERA_INMODE_DIFF. - - - cirrus,out-mono : Mono bit for each output, maximum of six cells if the - array is shorter outputs will be set to stereo. - - - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks - will be generated for. Useful when clock master for systems where the I2S - bus has multiple data lines. - One cell for each AIF, use a value of zero for AIFs that should be handled - normally. - - - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells - (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a - description of this value. - The second cell is ignored for codecs that do not have OUT6. - - - cirrus,pdm-mute : PDM mute format, must contain 2 cells - (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a - description of this value. - The second cell is ignored for codecs that do not have OUT6. - -Example: - -cs47l35@0 { - compatible = "cirrus,cs47l35"; - - cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>; - cirrus,inmode = < - MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */ - MADERA_INMODE_SE MADERA_INMODE_SE /* IN1B single-ended */ - MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */ - 0 0 /* not used on this codec */ - >; - cirrus,out-mono = <0 0 0 0 0 0>; - cirrus,max-channels-clocked = <2 0 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a495d5fc0d23..e8f716b5f875 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -102,8 +102,7 @@ properties: gpio@42: type: object - allOf: - - $ref: ../gpio/qcom,wcd934x-gpio.yaml# + $ref: ../gpio/qcom,wcd934x-gpio.yaml# patternProperties: "^.*@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml index d1b65554e681..8a4406be387a 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/sound/renesas,fsi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas FSI Sound Driver Device Tree Bindings +title: Renesas FIFO-buffered Serial Interface (FSI) maintainers: - Kuninori Morimoto @@ -17,16 +17,16 @@ properties: oneOf: # for FSI2 SoC - items: - - enum: - - renesas,fsi2-sh73a0 - - renesas,fsi2-r8a7740 - - enum: - - renesas,sh_fsi2 + - enum: + - renesas,fsi2-sh73a0 # SH-Mobile AG5 + - renesas,fsi2-r8a7740 # R-Mobile A1 + - enum: + - renesas,sh_fsi2 # for Generic - items: - - enum: - - renesas,sh_fsi - - renesas,sh_fsi2 + - enum: + - renesas,sh_fsi + - renesas,sh_fsi2 reg: maxItems: 1 @@ -34,6 +34,15 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + fsia,spdif-connection: $ref: /schemas/types.yaml#/definitions/flag description: FSI is connected by S/PDIF @@ -62,16 +71,24 @@ required: - compatible - reg - interrupts + - clocks + - power-domains + - '#sound-dai-cells' additionalProperties: false examples: - | - sh_fsi2: sound@ec230000 { + #include + #include + sh_fsi2: sound@fe1f0000 { compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; - reg = <0xec230000 0x400>; - interrupts = <0 146 0x4>; + reg = <0xfe1f0000 0x400>; + interrupts = ; + clocks = <&mstp3_clks R8A7740_CLK_FSI>; + power-domains = <&pd_a4mp>; + #sound-dai-cells = <1>; fsia,spdif-connection; fsia,stream-mode-support; fsia,use-internal-clock; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 10f9d3ad0d48..acb2b888dbfc 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -62,15 +62,13 @@ properties: maxItems: 1 rockchip,capture-channels: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 2 description: Max capture channels, if not set, 2 channels default. rockchip,playback-channels: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 description: Max playback channels, if not set, 8 channels default. diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index 306ac3d006dc..c5b5b4260496 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -49,9 +49,8 @@ properties: 0 - Mic bias is set to VREF 1 - Mic bias is set to VREF × 1.096 6 - Mic bias is set to AVDD - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 6] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 6] ti,vref-source: description: | @@ -59,9 +58,8 @@ properties: 0 - Set VREF to 2.75V 1 - Set VREF to 2.5V 2 - Set VREF to 1.375V - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] ti,pdm-edge-select: description: | diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt deleted file mode 100644 index e172c62dc2df..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,arizona.txt +++ /dev/null @@ -1,53 +0,0 @@ -Cirrus Logic Arizona class audio SoCs - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -This document lists sound specific bindings, see the primary binding -document: - ../mfd/arizona.txt - -Optional properties: - - - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - (wm5102, wm5110, wm8280, wm8997) - (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in . If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,out-volume-limit : The volume limit value that should be applied to each - output channel. See the datasheet for exact values. Channels are specified - in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml new file mode 100644 index 000000000000..22d54be7900a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a range + of analogue I/O. + + This document lists sound specific bindings, see the primary binding + document ../mfd/arizona.yaml + +properties: + '#sound-dai-cells': + description: + The first cell indicating the audio interface. + const: 1 + + wlf,inmode: + description: + A list of INn_MODE register values, where n is the number of input + signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by + default. If present, values must be specified less than or equal + to the number of input signals. If values less than the number of + input signals, elements that have not been specified are set to 0 by + default. Entries are (wm5102, wm5110, wm8280, + wm8997) and (wm8998, wm1814) + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 2 + default: 0 + + wlf,out-mono: + description: + A list of boolean values indicating whether each output is mono + or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero + value indicates a mono output. If present, the number of values + should be less than or equal to the number of outputs, if less values + are supplied the additional outputs will be treated as stereo. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 6 + items: + minimum: 0 + maximum: 1 + default: 0 + + wlf,dmic-ref: + description: + DMIC reference voltage source for each input, can be selected from + either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx) + are provided in dt-bindings/mfd/arizona.h. If present, the number + of values should be less than or equal to the number of inputs, + unspecified inputs will use the chip default. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 3 + default: 0 + + wlf,max-channels-clocked: + description: + The maximum number of channels to be clocked on each AIF, useful for + I2S systems with multiple data lines being mastered. Specify one + cell for each AIF to be configured, specify zero for AIFs that should + be handled normally. If present, number of cells must be less than + or equal to the number of AIFs. If less than the number of AIFs, for + cells that have not been specified the corresponding AIFs will be + treated as default setting. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + default: 0 + + wlf,spk-fmt: + description: + PDM speaker data format, must contain 2 cells (OUT5 and OUT6). See + the datasheet for values. The second cell is ignored for codecs that + do not have OUT6 (wm5102, wm8997, wm8998, wm1814) + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + wlf,spk-mute: + description: + PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). See + the datasheet for values. The second cell is ignored for codecs that + do not have OUT6 (wm5102, wm8997, wm8998, wm1814) + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + wlf,out-volume-limit: + description: + The volume limit value that should be applied to each output + channel. See the datasheet for exact values. Channels are specified + in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml new file mode 100644 index 000000000000..0abcac385e7c --- /dev/null +++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PXA2xx SSP SPI Controller bindings + +maintainers: + - Lubomir Rintel + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: marvell,mmp2-ssp + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + ready-gpios: + description: | + GPIO used to signal a SPI master that the FIFO is filled and we're + ready to service a transfer. Only useful in slave mode. + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +dependencies: + ready-gpios: [ spi-slave ] + +unevaluatedProperties: false + +examples: + - | + #include + spi@d4035000 { + compatible = "marvell,mmp2-ssp"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 5c16cf59ca00..0178831b0662 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya - - Akash Asthana + - Mukesh Savaliya + - Akash Asthana -description: - The QSPI controller allows SPI protocol communication in single, dual, or quad - wire transmission modes for read/write access to slaves such as NOR flash. +description: The QSPI controller allows SPI protocol communication in single, + dual, or quad wire transmission modes for read/write access to slaves such + as NOR flash. allOf: - $ref: /spi/spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml index c429cf4bea5b..f492cb9fea12 100644 --- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml @@ -16,8 +16,8 @@ properties: compatible: items: - enum: - - renesas,hspi-r8a7778 # R-Car M1A - - renesas,hspi-r8a7779 # R-Car H1 + - renesas,hspi-r8a7778 # R-Car M1A + - renesas,hspi-r8a7779 # R-Car H1 - const: renesas,hspi reg: diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index b6c1dd2a9c5e..e84edcf8b332 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -96,43 +96,39 @@ properties: renesas,dtdl: description: delay sync signal (setup) in transmit mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: - - 0 # no bit delay - - 50 # 0.5-clock-cycle delay - - 100 # 1-clock-cycle delay - - 150 # 1.5-clock-cycle delay - - 200 # 2-clock-cycle delay + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # no bit delay + - 50 # 0.5-clock-cycle delay + - 100 # 1-clock-cycle delay + - 150 # 1.5-clock-cycle delay + - 200 # 2-clock-cycle delay renesas,syncdl: description: delay sync signal (hold) in transmit mode - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: - - 0 # no bit delay - - 50 # 0.5-clock-cycle delay - - 100 # 1-clock-cycle delay - - 150 # 1.5-clock-cycle delay - - 200 # 2-clock-cycle delay - - 300 # 3-clock-cycle delay + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # no bit delay + - 50 # 0.5-clock-cycle delay + - 100 # 1-clock-cycle delay + - 150 # 1.5-clock-cycle delay + - 200 # 2-clock-cycle delay + - 300 # 3-clock-cycle delay renesas,tx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default TX fifo size. Unit is words. Ignored if 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 default: 64 renesas,rx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default RX fifo size. Unit is words. Ignored if 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 default: 64 required: @@ -149,7 +145,7 @@ examples: msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0xe6e20000 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index d8e5509a7081..c6a2f543648b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -115,24 +115,22 @@ patternProperties: Maximum SPI clocking speed of the device in Hz. spi-rx-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] - - default: 1 description: Bus width to the SPI bus used for read transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 1 spi-rx-delay-us: description: Delay, in microseconds, after a read transfer. spi-tx-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] - - default: 1 description: Bus width to the SPI bus used for write transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 1 spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index dfb697c69341..22999024477f 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -51,7 +51,7 @@ properties: pl022,rt: description: indicates the controller should run the message pump with realtime - priority to minimise the transfer latency on the bus (boolean) + priority to minimise the transfer latency on the bus (boolean) type: boolean dmas: @@ -80,55 +80,48 @@ patternProperties: properties: pl022,interface: description: SPI interface type - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # SPI - - 1 # Texas Instruments Synchronous Serial Frame Format - - 2 # Microwire (Half Duplex) + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex) pl022,com-mode: description: Specifies the transfer mode - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # interrupt mode - - 1 # polling mode - - 2 # DMA mode - default: 1 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1 pl022,rx-level-trig: description: Rx FIFO watermark level - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 4 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 4 pl022,tx-level-trig: description: Tx FIFO watermark level - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 4 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 4 pl022,ctrl-len: description: Microwire interface - Control length - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0x03 - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0x03 + maximum: 0x1f pl022,wait-state: description: Microwire interface - Wait state - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] pl022,duplex: description: Microwire interface - Full/Half duplex - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] required: - compatible diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt deleted file mode 100644 index e30e0c2a4bce..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt +++ /dev/null @@ -1,27 +0,0 @@ -PXA2xx SSP SPI Controller - -Required properties: -- compatible: Must be "marvell,mmp2-ssp". -- reg: Offset and length of the device's register set. -- interrupts: Should be the interrupt number. -- clocks: Should contain a single entry describing the clock input. -- #address-cells: Number of cells required to define a chip select address. -- #size-cells: Should be zero. - -Optional properties: -- cs-gpios: list of GPIO chip selects. See the SPI bus bindings, - Documentation/devicetree/bindings/spi/spi-bus.txt -- spi-slave: Empty property indicating the SPI controller is used in slave mode. -- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled - and we're ready to service a transfer. Only useful in slave mode. - -Child nodes represent devices on the SPI bus - See ../spi/spi-bus.txt - -Example: - ssp1: spi@d4035000 { - compatible = "marvell,mmp2-ssp"; - reg = <0xd4035000 0x1000>; - clocks = <&soc_clocks MMP2_CLK_SSP0>; - interrupts = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml index 140e4351a19f..4932205d1cba 100644 --- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml @@ -32,11 +32,10 @@ properties: https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi reg: - maxItems: 1 - - description: - Physical base address and size of SPI registers map - A second (optional) range can indicate memory mapped flash + minItems: 1 + items: + - description: SPI registers region + - description: Memory mapped flash region interrupts: maxItems: 1 @@ -50,18 +49,16 @@ properties: sifive,fifo-depth: description: Depth of hardware queues; defaults to 8 - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 8 ] - - default: 8 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [8] + default: 8 sifive,max-bits-per-word: description: Maximum bits per word; defaults to 8 - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ] - - default: 8 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] + default: 8 required: - compatible @@ -73,7 +70,7 @@ examples: - | spi: spi@10040000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; - reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>; + reg = <0x10040000 0x1000>, <0x20000000 0x10000000>; interrupt-parent = <&plic>; interrupts = <51>; clocks = <&tlclk>; diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml index 3665a5fe6b7f..1a342ce1f798 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml @@ -24,8 +24,8 @@ properties: reg-names: items: - - const: qspi - - const: qspi_mm + - const: qspi + - const: qspi_mm clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 4b5509436588..f5825935fd22 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -29,8 +29,8 @@ properties: - const: allwinner,sun4i-a10-system-control - const: allwinner,sun5i-a13-system-control - items: - - const: allwinner,sun7i-a20-system-control - - const: allwinner,sun4i-a10-system-control + - const: allwinner,sun7i-a20-system-control + - const: allwinner,sun4i-a10-system-control - const: allwinner,sun8i-a23-system-control - const: allwinner,sun8i-h3-system-control - const: allwinner,sun50i-a64-sram-controller @@ -38,11 +38,11 @@ properties: - const: allwinner,sun50i-a64-system-control - const: allwinner,sun50i-h5-system-control - items: - - const: allwinner,sun50i-h6-system-control - - const: allwinner,sun50i-a64-system-control + - const: allwinner,sun50i-h6-system-control + - const: allwinner,sun50i-a64-system-control - items: - - const: allwinner,suniv-f1c100s-system-control - - const: allwinner,sun4i-a10-system-control + - const: allwinner,suniv-f1c100s-system-control + - const: allwinner,sun4i-a10-system-control reg: maxItems: 1 @@ -69,44 +69,44 @@ patternProperties: - const: allwinner,sun4i-a10-sram-d - const: allwinner,sun50i-a64-sram-c - items: - - const: allwinner,sun5i-a13-sram-a3-a4 - - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun5i-a13-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 - items: - - const: allwinner,sun7i-a20-sram-a3-a4 - - const: allwinner,sun4i-a10-sram-a3-a4 + - const: allwinner,sun7i-a20-sram-a3-a4 + - const: allwinner,sun4i-a10-sram-a3-a4 - items: - - const: allwinner,sun5i-a13-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun5i-a13-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun7i-a20-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun7i-a20-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun8i-a23-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun8i-a23-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun8i-h3-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun8i-h3-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-a64-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-a64-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-h5-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-h5-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun50i-h6-sram-c1 - - const: allwinner,sun4i-a10-sram-c1 + - const: allwinner,sun50i-h6-sram-c1 + - const: allwinner,sun4i-a10-sram-c1 - items: - - const: allwinner,sun5i-a13-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun5i-a13-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,sun7i-a20-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,sun7i-a20-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,suniv-f1c100s-sram-d - - const: allwinner,sun4i-a10-sram-d + - const: allwinner,suniv-f1c100s-sram-d + - const: allwinner,sun4i-a10-sram-d - items: - - const: allwinner,sun50i-h6-sram-c - - const: allwinner,sun50i-a64-sram-c + - const: allwinner,sun50i-h6-sram-c + - const: allwinner,sun50i-a64-sram-c required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt b/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt deleted file mode 100644 index 6b42fda306ff..000000000000 --- a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt +++ /dev/null @@ -1,16 +0,0 @@ -Rockchip SRAM for pmu: ------------------------------- - -The sram of pmu is used to store the function of resume from maskrom(the 1st -level loader). This is a common use of the "pmu-sram" because it keeps power -even in low power states in the system. - -Required node properties: -- compatible : should be "rockchip,rk3288-pmu-sram" -- reg : physical base address and the size of the registers window - -Example: - sram@ff720000 { - compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; - reg = <0xff720000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 7b83cc6c9bfa..19d116ff9ddc 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -29,6 +29,7 @@ properties: enum: - mmio-sram - atmel,sama5d2-securam + - rockchip,rk3288-pmu-sram reg: maxItems: 1 @@ -73,6 +74,8 @@ patternProperties: - allwinner,sun50i-a64-sram-c - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram + - amlogic,meson-gxbb-scp-shmem + - amlogic,meson-axg-scp-shmem - renesas,smp-sram - rockchip,rk3066-smp-sram - samsung,exynos4210-sysram @@ -118,9 +121,18 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" - - ranges + +if: + properties: + compatible: + contains: + const: rockchip,rk3288-pmu-sram + +else: + required: + - "#address-cells" + - "#size-cells" + - ranges additionalProperties: false @@ -223,6 +235,16 @@ examples: }; }; + - | + // Rockchip's rk3288 SoC uses the sram of pmu to store the function of + // resume from maskrom(the 1st level loader). This is a common use of + // the "pmu-sram" because it keeps power even in low power states + // in the system. + sram@ff720000 { + compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; + reg = <0xff720000 0x1000>; + }; + - | // Allwinner's A80 SoC uses part of the secure sram for hotplugging of the // primary core (cpu0). Once the core gets powered up it checks if a magic diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.rst similarity index 92% rename from Documentation/devicetree/bindings/submitting-patches.txt rename to Documentation/devicetree/bindings/submitting-patches.rst index 98bee6240b65..0aab2b3f16d0 100644 --- a/Documentation/devicetree/bindings/submitting-patches.txt +++ b/Documentation/devicetree/bindings/submitting-patches.rst @@ -1,13 +1,17 @@ +.. SPDX-License-Identifier: GPL-2.0 - Submitting devicetree (DT) binding patches +========================================== +Submitting devicetree (DT) binding patches +========================================== I. For patch submitters +======================= 0) Normal patch submission rules from Documentation/process/submitting-patches.rst applies. 1) The Documentation/ and include/dt-bindings/ portion of the patch should - be a separate patch. The preferred subject prefix for binding patches is: + be a separate patch. The preferred subject prefix for binding patches is:: "dt-bindings: : ..." @@ -17,7 +21,7 @@ I. For patch submitters 2) DT binding files are written in DT schema format using json-schema vocabulary and YAML file format. The DT binding files must pass validation - by running: + by running:: make dt_binding_check @@ -60,6 +64,7 @@ I. For patch submitters II. For kernel maintainers +========================== 1) If you aren't comfortable reviewing a given binding, reply to it and ask the devicetree maintainers for guidance. This will help them prioritize @@ -76,6 +81,7 @@ II. For kernel maintainers kept with the driver using the binding. III. Notes +========== 0) Please see ...bindings/ABI.txt for details regarding devicetree ABI. diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index e43ec50bda37..999c6b365f1d 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal properties: compatible: - items: - - enum: - - amlogic,g12a-cpu-thermal - - amlogic,g12a-ddr-thermal - - const: amlogic,g12a-thermal + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt deleted file mode 100644 index 823e4176eef8..000000000000 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs - -Required properties: -- compatible : must be one of following: - - "fsl,imx6q-tempmon" for i.MX6Q, - - "fsl,imx6sx-tempmon" for i.MX6SX, - - "fsl,imx7d-tempmon" for i.MX7S/D. -- interrupts : the interrupt output of the controller: - i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold, - i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC, - when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature - is higher than panic threshold, system will auto reboot by SRC module. -- fsl,tempmon : phandle pointer to system controller that contains TEMPMON - control registers, e.g. ANATOP on imx6q. -- nvmem-cells: A phandle to the calibration cells provided by ocotp. -- nvmem-cell-names: Should be "calib", "temp_grade". - -Deprecated properties: -- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON - calibration data, e.g. OCOTP on imx6q. The details about calibration data - can be found in SoC Reference Manual. - -Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips -because it does not handle OCOTP clock requirements. - -Optional properties: -- clocks : thermal sensor's clock source. - -Example: -ocotp: ocotp@21bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx6sx-ocotp", "syscon"; - reg = <0x021bc000 0x4000>; - clocks = <&clks IMX6SX_CLK_OCOTP>; - - tempmon_calib: calib@38 { - reg = <0x38 4>; - }; - - tempmon_temp_grade: temp-grade@20 { - reg = <0x20 4>; - }; -}; - -tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; -}; - -Legacy method (Deprecated): -tempmon { - compatible = "fsl,imx6q-tempmon"; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks 172>; -}; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml new file mode 100644 index 000000000000..aedac1669998 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/imx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Thermal Binding + +maintainers: + - Shawn Guo + - Anson Huang + +properties: + compatible: + enum: + - fsl,imx6q-tempmon + - fsl,imx6sx-tempmon + - fsl,imx7d-tempmon + + interrupts: + description: | + The interrupt output of the controller, i.MX6Q has IRQ_HIGH which + will be triggered when temperature is higher than high threshold, + i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW + and the other is IRQ_PANIC, when temperature is lower than low + threshold, IRQ_LOW will be triggered, when temperature is higher + than panic threshold, IRQ_PANIC will be triggered, and system can + be configured to auto reboot by SRC module for IRQ_PANIC. IRQ_HIGH, + IRQ_LOW and IRQ_PANIC share same interrupt output of controller. + maxItems: 1 + + nvmem-cells: + items: + - description: Phandle to the calibration data provided by ocotp + - description: Phandle to the temperature grade provided by ocotp + + nvmem-cell-names: + items: + - const: calib + - const: temp_grade + + fsl,tempmon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: Phandle to anatop system controller node. + + fsl,tempmon-data: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Deprecated property, phandle pointer to fuse controller that contains + TEMPMON calibration data, e.g. OCOTP on imx6q. The details about + calibration data can be found in SoC Reference Manual. + deprecated: true + + clocks: + maxItems: 1 + +required: + - compatible + - interrupts + - fsl,tempmon + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include + #include + + efuse@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + anatop@20c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, + <0 54 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + + tempmon { + compatible = "fsl,imx6sx-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt deleted file mode 100644 index 3629d3c7e76a..000000000000 --- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt +++ /dev/null @@ -1,15 +0,0 @@ -* Thermal Monitoring Unit (TMU) on Freescale i.MX8MM SoC - -Required properties: -- compatible : Must be "fsl,imx8mm-tmu" or "fsl,imx8mp-tmu". -- reg : Address range of TMU registers. -- clocks : TMU's clock source. -- #thermal-sensor-cells : Should be 0 or 1. See ./thermal.txt for a description. - -Example: -tmu: tmu@30260000 { - compatible = "fsl,imx8mm-tmu"; - reg = <0x30260000 0x10000>; - clocks = <&clk IMX8MM_CLK_TMU_ROOT>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml new file mode 100644 index 000000000000..38852877b8e3 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/imx8mm-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Mini Thermal Binding + +maintainers: + - Anson Huang + +description: | + i.MX8MM has TMU IP to allow temperature measurement, there are + currently two distinct major versions of the IP that is supported + by a single driver. The IP versions are named v1 and v2, v1 is + for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has + 2 sensors. + +properties: + compatible: + enum: + - fsl,imx8mm-tmu + - fsl,imx8mp-tmu + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#thermal-sensor-cells": + description: | + Number of cells required to uniquely identify the thermal + sensors, 0 for ONLY one sensor and 1 for multiple sensors. + enum: + - 0 + - 1 + +required: + - compatible + - reg + - clocks + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + #include + + thermal-sensor@30260000 { + compatible = "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 2ddd39d96766..d7be931b42d2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -73,12 +73,11 @@ properties: - const: calib_sel "#qcom,sensors": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - - maximum: 16 description: Number of sensors enabled on this platform + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16 "#thermal-sensor-cells": const: 1 diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt deleted file mode 100644 index 2993fa720195..000000000000 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ /dev/null @@ -1,60 +0,0 @@ -* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver - -On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal -sensors (THS) which are the analog circuits for measuring temperature (Tj) -inside the LSI. - -Required properties: -- compatible : "renesas,-thermal", - Examples with soctypes are: - - "renesas,r8a774a1-thermal" (RZ/G2M) - - "renesas,r8a774b1-thermal" (RZ/G2N) - - "renesas,r8a7795-thermal" (R-Car H3) - - "renesas,r8a7796-thermal" (R-Car M3-W) - - "renesas,r8a77961-thermal" (R-Car M3-W+) - - "renesas,r8a77965-thermal" (R-Car M3-N) - - "renesas,r8a77980-thermal" (R-Car V3H) -- reg : Address ranges of the thermal registers. Each sensor - needs one address range. Sorting must be done in - increasing order according to datasheet, i.e. - TSC1, TSC2, ... -- clocks : Must contain a reference to the functional clock. -- #thermal-sensor-cells : must be <1>. - -Optional properties: - -- interrupts : interrupts routed to the TSC (must be 3). -- power-domain : Must contain a reference to the power domain. This - property is mandatory if the thermal sensor instance - is part of a controllable power domain. - -Example: - - tsc: thermal@e6198000 { - compatible = "renesas,r8a7795-thermal"; - reg = <0 0xe6198000 0 0x100>, - <0 0xe61a0000 0 0x100>, - <0 0xe61a8000 0 0x100>; - interrupts = , - , - ; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #thermal-sensor-cells = <1>; - }; - - thermal-zones { - sensor_thermal1: sensor-thermal1 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; - - trips { - sensor1_crit: sensor1-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml new file mode 100644 index 000000000000..b1a55ae497de --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/rcar-gen3-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen3 Thermal Sensor + +description: + On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal + sensors (THS) which are the analog circuits for measuring temperature (Tj) + inside the LSI. + +maintainers: + - Niklas Söderlund + +properties: + compatible: + enum: + - renesas,r8a774a1-thermal # RZ/G2M + - renesas,r8a774b1-thermal # RZ/G2N + - renesas,r8a7795-thermal # R-Car H3 + - renesas,r8a7796-thermal # R-Car M3-W + - renesas,r8a77961-thermal # R-Car M3-W+ + - renesas,r8a77965-thermal # R-Car M3-N + - renesas,r8a77980-thermal # R-Car V3H + reg: + minItems: 2 + maxItems: 3 + items: + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers + + interrupts: + items: + - description: TEMP1 interrupt + - description: TEMP2 interrupt + - description: TEMP3 interrupt + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include + #include + #include + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7795-thermal"; + reg = <0xe6198000 0x100>, + <0xe61a0000 0x100>, + <0xe61a8000 0x100>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + sensor_thermal: sensor-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index d2f4f1b063ac..0994693d240f 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -20,6 +20,7 @@ properties: - const: renesas,rcar-thermal # Generic without thermal-zone - items: - enum: + - renesas,thermal-r8a7742 # RZ/G1H - renesas,thermal-r8a7743 # RZ/G1M - renesas,thermal-r8a7744 # RZ/G1N - const: renesas,rcar-gen2-thermal # Generic thermal-zone @@ -94,8 +95,8 @@ examples: thermal@e61f0000 { compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, - <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; + reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, + <0xe61f0200 0x38>, <0xe61f0300 0x38>; interrupts = ; clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; power-domains = <&pd_c5>; @@ -111,7 +112,7 @@ examples: compatible = "renesas,thermal-r8a7790", "renesas,rcar-gen2-thermal", "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>; interrupts = ; clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml new file mode 100644 index 000000000000..bb9594bb2cf1 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier thermal monitor + +description: | + This describes the devicetree bindings for thermal monitor supported by + PVT(Process, Voltage and Temperature) monitoring unit implemented on + Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pxs2-thermal + - socionext,uniphier-ld20-thermal + - socionext,uniphier-pxs3-thermal + + interrupts: + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + + socionext,tmod-calibration: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - maxItems: 2 + description: + A pair of calibrated values referred from PVT, in case that the values + aren't set on SoC, like a reference board. + +required: + - compatible + - interrupts + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + // The UniPhier thermal should be a subnode of a "syscon" compatible node. + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld20-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + pvtctl: thermal { + compatible = "socionext,uniphier-ld20-thermal"; + interrupts = <0 3 1>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml index 058c4cc06ba6..af2ff930646a 100644 --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml @@ -83,7 +83,7 @@ examples: - | ap_thm0: thermal@32200000 { compatible = "sprd,ums512-thermal"; - reg = <0 0x32200000 0 0x10000>; + reg = <0x32200000 0x10000>; clock-names = "enable"; clocks = <&aonapb_gate 32>; #thermal-sensor-cells = <1>; diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt deleted file mode 100644 index ceb92a95727a..000000000000 --- a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt +++ /dev/null @@ -1,65 +0,0 @@ -* UniPhier Thermal bindings - -This describes the devicetree bindings for thermal monitor supported by -PVT(Process, Voltage and Temperature) monitoring unit implemented on Socionext -UniPhier SoCs. - -Required properties: -- compatible : - - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC - - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC - - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC -- interrupts : IRQ for the temperature alarm -- #thermal-sensor-cells : Should be 0. See ./thermal.txt for details. - -Optional properties: -- socionext,tmod-calibration: A pair of calibrated values referred from PVT, - in case that the values aren't set on SoC, - like a reference board. - -Example: - - sysctrl@61840000 { - compatible = "socionext,uniphier-ld20-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x10000>; - ... - pvtctl: pvtctl { - compatible = "socionext,uniphier-ld20-thermal"; - interrupts = <0 3 1>; - #thermal-sensor-cells = <0>; - }; - ... - }; - - thermal-zones { - cpu_thermal { - polling-delay-passive = <250>; /* 250ms */ - polling-delay = <1000>; /* 1000ms */ - thermal-sensors = <&pvtctl>; - - trips { - cpu_crit: cpu_crit { - temperature = <110000>; /* 110C */ - hysteresis = <2000>; - type = "critical"; - }; - cpu_alert: cpu_alert { - temperature = <100000>; /* 100C */ - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = <&cpu0 (-1) (-1)>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = <&cpu2 (-1) (-1)>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index fa255672e8e5..2c75105c1398 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -28,10 +28,10 @@ properties: - arm,armv7-timer - items: - enum: - - arm,armv7-timer + - arm,armv7-timer - items: - enum: - - arm,armv8-timer + - arm,armv8-timer interrupts: items: @@ -51,6 +51,12 @@ properties: description: If present, the timer is powered through an always-on power domain, therefore it never loses context. + allwinner,erratum-unknown1: + type: boolean + description: Indicates the presence of an erratum found in Allwinner SoCs, + where reading certain values from the counter is unreliable. This also + affects writes to the tval register, due to the implicit counter read. + fsl,erratum-a008585: type: boolean description: Indicates the presence of QorIQ erratum A-008585, which says diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 582bbef62b95..d83a1f97f911 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -20,7 +20,7 @@ properties: compatible: items: - enum: - - arm,armv7-timer-mem + - arm,armv7-timer-mem reg: maxItems: 1 @@ -65,10 +65,9 @@ patternProperties: description: A timer node has up to 8 frame sub-nodes, each with the following properties. properties: frame-number: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 7 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 7 interrupts: minItems: 1 @@ -77,7 +76,7 @@ patternProperties: - description: physical timer irq - description: virtual timer irq - reg : + reg: minItems: 1 maxItems: 2 items: diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt deleted file mode 100644 index eeee6cd51e5c..000000000000 --- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt +++ /dev/null @@ -1,21 +0,0 @@ -Cadence TTC - Triple Timer Counter - -Required properties: -- compatible : Should be "cdns,ttc". -- reg : Specifies base physical address and size of the registers. -- interrupts : A list of 3 interrupts; one per timer channel. -- clocks: phandle to the source clock - -Optional properties: -- timer-width: Bit width of the timer, necessary if not 16. - -Example: - -ttc0: ttc0@f8001000 { - interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; - compatible = "cdns,ttc"; - reg = <0xF8001000 0x1000>; - clocks = <&cpu_clk 3>; - timer-width = <32>; -}; diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml new file mode 100644 index 000000000000..c532b60b9c63 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/cdns,ttc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence TTC - Triple Timer Counter + +maintainers: + - Michal Simek + +properties: + compatible: + const: cdns,ttc + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + maxItems: 3 + description: | + A list of 3 interrupts; one per timer channel. + + clocks: + maxItems: 1 + + timer-width: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: | + Bit width of the timer, necessary if not 16. + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + ttc0: ttc0@f8001000 { + interrupt-parent = <&intc>; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; + compatible = "cdns,ttc"; + reg = <0xF8001000 0x1000>; + clocks = <&cpu_clk 3>; + timer-width = <32>; + }; diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt deleted file mode 100644 index 5d8fd5b52598..000000000000 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt +++ /dev/null @@ -1,45 +0,0 @@ -Freescale i.MX General Purpose Timer (GPT) - -Required properties: - -- compatible : should be one of following: - for i.MX1: - - "fsl,imx1-gpt"; - for i.MX21: - - "fsl,imx21-gpt"; - for i.MX27: - - "fsl,imx27-gpt", "fsl,imx21-gpt"; - for i.MX31: - - "fsl,imx31-gpt"; - for i.MX25: - - "fsl,imx25-gpt", "fsl,imx31-gpt"; - for i.MX50: - - "fsl,imx50-gpt", "fsl,imx31-gpt"; - for i.MX51: - - "fsl,imx51-gpt", "fsl,imx31-gpt"; - for i.MX53: - - "fsl,imx53-gpt", "fsl,imx31-gpt"; - for i.MX6Q: - - "fsl,imx6q-gpt", "fsl,imx31-gpt"; - for i.MX6DL: - - "fsl,imx6dl-gpt"; - for i.MX6SL: - - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; - for i.MX6SX: - - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; -- reg : specifies base physical address and size of the registers. -- interrupts : should be the gpt interrupt. -- clocks : the clocks provided by the SoC to drive the timer, must contain - an entry for each entry in clock-names. -- clock-names : must include "ipg" entry first, then "per" entry. - -Example: - -gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; - reg = <0x10003000 0x1000>; - interrupts = <26>; - clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, - <&clks IMX27_CLK_PER1_GATE>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml new file mode 100644 index 000000000000..883f7f46650b --- /dev/null +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX General Purpose Timer (GPT) + +maintainers: + - Sascha Hauer + +properties: + compatible: + oneOf: + - const: fsl,imx1-gpt + - const: fsl,imx21-gpt + - items: + - const: fsl,imx27-gpt + - const: fsl,imx21-gpt + - const: fsl,imx31-gpt + - items: + - enum: + - fsl,imx25-gpt + - fsl,imx50-gpt + - fsl,imx51-gpt + - fsl,imx53-gpt + - fsl,imx6q-gpt + - const: fsl,imx31-gpt + - const: fsl,imx6dl-gpt + - items: + - enum: + - fsl,imx6sl-gpt + - fsl,imx6sx-gpt + - const: fsl,imx6dl-gpt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SoC GPT ipg clock + - description: SoC GPT per clock + + clock-names: + items: + - const: ipg + - const: per + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + timer@10003000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x10003000 0x1000>; + interrupts = <26>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt deleted file mode 100644 index 91f704951845..000000000000 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt +++ /dev/null @@ -1,138 +0,0 @@ -Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings -========================================================== - -For a description of the TCU hardware and drivers, have a look at -Documentation/mips/ingenic-tcu.rst. - -Required properties: - -- compatible: Must be one of: - * ingenic,jz4740-tcu - * ingenic,jz4725b-tcu - * ingenic,jz4770-tcu - * ingenic,x1000-tcu - followed by "simple-mfd". -- reg: Should be the offset/length value corresponding to the TCU registers -- clocks: List of phandle & clock specifiers for clocks external to the TCU. - The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock - should be provided if the SoC has it. -- clock-names: List of name strings for the external clocks. -- #clock-cells: Should be <1>; - Clock consumers specify this argument to identify a clock. The valid values - may be found in . -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value should be 1. -- interrupts : Specifies the interrupt the controller is connected to. - -Optional properties: - -- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use. - Default value is 0xfc. - - -Children nodes -========================================================== - - -PWM node: ---------- - -Required properties: - -- compatible: Must be one of: - * ingenic,jz4740-pwm - * ingenic,jz4725b-pwm -- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell - format. -- clocks: List of phandle & clock specifiers for the TCU clocks. -- clock-names: List of name strings for the TCU clocks. - - -Watchdog node: --------------- - -Required properties: - -- compatible: Must be "ingenic,jz4740-watchdog" -- clocks: phandle to the WDT clock -- clock-names: should be "wdt" - - -OS Timer node: ---------- - -Required properties: - -- compatible: Must be one of: - * ingenic,jz4725b-ost - * ingenic,jz4770-ost -- clocks: phandle to the OST clock -- clock-names: should be "ost" -- interrupts : Specifies the interrupt the OST is connected to. - - -Example -========================================================== - -#include -#include - -/ { - tcu: timer@10002000 { - compatible = "ingenic,jz4770-tcu", "simple-mfd"; - reg = <0x10002000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x10002000 0x1000>; - - #clock-cells = <1>; - - clocks = <&cgu JZ4770_CLK_RTC - &cgu JZ4770_CLK_EXT - &cgu JZ4770_CLK_PCLK>; - clock-names = "rtc", "ext", "pclk"; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&intc>; - interrupts = <27 26 25>; - - watchdog: watchdog@0 { - compatible = "ingenic,jz4740-watchdog"; - reg = <0x0 0xc>; - - clocks = <&tcu TCU_CLK_WDT>; - clock-names = "wdt"; - }; - - pwm: pwm@40 { - compatible = "ingenic,jz4740-pwm"; - reg = <0x40 0x80>; - - #pwm-cells = <3>; - - clocks = <&tcu TCU_CLK_TIMER0 - &tcu TCU_CLK_TIMER1 - &tcu TCU_CLK_TIMER2 - &tcu TCU_CLK_TIMER3 - &tcu TCU_CLK_TIMER4 - &tcu TCU_CLK_TIMER5 - &tcu TCU_CLK_TIMER6 - &tcu TCU_CLK_TIMER7>; - clock-names = "timer0", "timer1", "timer2", "timer3", - "timer4", "timer5", "timer6", "timer7"; - }; - - ost: timer@e0 { - compatible = "ingenic,jz4770-ost"; - reg = <0xe0 0x20>; - - clocks = <&tcu TCU_CLK_OST>; - clock-names = "ost"; - - interrupts = <15>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml new file mode 100644 index 000000000000..03893e6a2f57 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings + +description: | + For a description of the TCU hardware and drivers, have a look at + Documentation/mips/ingenic-tcu.rst. + +maintainers: + - Paul Cercueil + +select: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-tcu + - ingenic,jz4725b-tcu + - ingenic,jz4770-tcu + - ingenic,jz4780-tcu + - ingenic,x1000-tcu + required: + - compatible + +properties: + $nodename: + pattern: "^timer@[0-9a-f]+$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#clock-cells": + const: 1 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + ranges: true + + compatible: + oneOf: + - items: + - enum: + - ingenic,jz4740-tcu + - ingenic,jz4725b-tcu + - ingenic,jz4770-tcu + - ingenic,x1000-tcu + - const: simple-mfd + - items: + - const: ingenic,jz4780-tcu + - const: ingenic,jz4770-tcu + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + items: + - description: RTC clock + - description: EXT clock + - description: PCLK clock + - description: TCU clock + minItems: 3 + + clock-names: + items: + - const: rtc + - const: ext + - const: pclk + - const: tcu + minItems: 3 + + interrupts: + items: + - description: TCU0 interrupt + - description: TCU1 interrupt + - description: TCU2 interrupt + minItems: 1 + + assigned-clocks: + minItems: 1 + maxItems: 8 + + assigned-clock-parents: + minItems: 1 + maxItems: 8 + + assigned-clock-rates: + minItems: 1 + maxItems: 8 + + ingenic,pwm-channels-mask: + description: Bitmask of TCU channels reserved for PWM use. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x00 + maximum: 0xff + default: 0xfc + +patternProperties: + "^watchdog@[a-f0-9]+$": + type: object + $ref: ../watchdog/watchdog.yaml# + properties: + compatible: + oneOf: + - enum: + - ingenic,jz4740-watchdog + - ingenic,jz4780-watchdog + - items: + - const: ingenic,jz4770-watchdog + - const: ingenic,jz4740-watchdog + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: wdt + + required: + - compatible + - reg + - clocks + - clock-names + + "^pwm@[a-f0-9]+$": + type: object + $ref: ../pwm/pwm.yaml# + properties: + compatible: + oneOf: + - enum: + - ingenic,jz4740-pwm + - items: + - enum: + - ingenic,jz4770-pwm + - ingenic,jz4780-pwm + - const: ingenic,jz4740-pwm + + reg: + maxItems: 1 + + clocks: + minItems: 6 + maxItems: 8 + + clock-names: + items: + - const: timer0 + - const: timer1 + - const: timer2 + - const: timer3 + - const: timer4 + - const: timer5 + - const: timer6 + - const: timer7 + minItems: 6 + + required: + - compatible + - reg + - clocks + - clock-names + + "^timer@[a-f0-9]+$": + type: object + properties: + compatible: + oneOf: + - enum: + - ingenic,jz4725b-ost + - ingenic,jz4770-ost + - items: + - const: ingenic,jz4780-ost + - const: ingenic,jz4770-ost + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ost + + interrupts: + maxItems: 1 + + required: + - compatible + - reg + - clocks + - clock-names + - interrupts + + additionalProperties: false + +required: + - "#clock-cells" + - "#interrupt-cells" + - interrupt-controller + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + tcu: timer@10002000 { + compatible = "ingenic,jz4770-tcu", "simple-mfd"; + reg = <0x10002000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10002000 0x1000>; + + #clock-cells = <1>; + + clocks = <&cgu JZ4770_CLK_RTC>, + <&cgu JZ4770_CLK_EXT>, + <&cgu JZ4770_CLK_PCLK>; + clock-names = "rtc", "ext", "pclk"; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&intc>; + interrupts = <27 26 25>; + + watchdog: watchdog@0 { + compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog"; + reg = <0x0 0xc>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + + pwm: pwm@40 { + compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, + <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, + <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, + <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, + <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; + + ost: timer@e0 { + compatible = "ingenic,jz4770-ost"; + reg = <0xe0 0x20>; + + clocks = <&tcu TCU_CLK_OST>; + clock-names = "ost"; + + interrupts = <15>; + }; + }; diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt deleted file mode 100644 index d57659996d62..000000000000 --- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -NXP System Counter Module(sys_ctr) - -The system counter(sys_ctr) is a programmable system counter which provides -a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in -applications where the counter is always powered and support multiple, -unrelated clocks. The compare frame inside can be used for timer purpose. - -Required properties: - -- compatible : should be "nxp,sysctr-timer" -- reg : Specifies the base physical address and size of the comapre - frame and the counter control, read & compare. -- interrupts : should be the first compare frames' interrupt -- clocks : Specifies the counter clock. -- clock-names: Specifies the clock's name of this module - -Example: - - system_counter: timer@306a0000 { - compatible = "nxp,sysctr-timer"; - reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */ - clocks = <&clk_8m>; - clock-names = "per"; - interrupts = ; - }; diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml new file mode 100644 index 000000000000..830211c55b4a --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/nxp,sysctr-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP System Counter Module(sys_ctr) + +maintainers: + - Bai Ping + +description: | + The system counter(sys_ctr) is a programmable system counter + which provides a shared time base to Cortex A15, A7, A53, A73, + etc. it is intended for use in applications where the counter + is always powered and support multiple, unrelated clocks. The + compare frame inside can be used for timer purpose. + +properties: + compatible: + const: nxp,sysctr-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: per + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + clocks = <&clk_8m>; + clock-names = "per"; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt deleted file mode 100644 index f82087b220f4..000000000000 --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt +++ /dev/null @@ -1,28 +0,0 @@ -NXP Low Power Timer/Pulse Width Modulation Module (TPM) - -The Timer/PWM Module (TPM) supports input capture, output compare, -and the generation of PWM signals to control electric motor and power -management applications. The counter, compare and capture registers -are clocked by an asynchronous clock that can remain enabled in low -power modes. TPM can support global counter bus where one TPM drives -the counter bus for the others, provided bit width is the same. - -Required properties: - -- compatible : should be "fsl,imx7ulp-tpm" -- reg : Specifies base physical address and size of the register sets - for the clock event device and clock source device. -- interrupts : Should be the clock event device interrupt. -- clocks : The clocks provided by the SoC to drive the timer, must contain - an entry for each entry in clock-names. -- clock-names : Must include the following entries: "ipg" and "per". - -Example: -tpm5: tpm@40260000 { - compatible = "fsl,imx7ulp-tpm"; - reg = <0x40260000 0x1000>; - interrupts = ; - clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>, - <&clks IMX7ULP_CLK_LPTPM5>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml new file mode 100644 index 000000000000..edd9585f6726 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Low Power Timer/Pulse Width Modulation Module (TPM) + +maintainers: + - Dong Aisheng + +description: | + The Timer/PWM Module (TPM) supports input capture, output compare, + and the generation of PWM signals to control electric motor and power + management applications. The counter, compare and capture registers + are clocked by an asynchronous clock that can remain enabled in low + power modes. TPM can support global counter bus where one TPM drives + the counter bus for the others, provided bit width is the same. + +properties: + compatible: + const: fsl,imx7ulp-tpm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SoC TPM ipg clock + - description: SoC TPM per clock + + clock-names: + items: + - const: ipg + - const: per + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + timer@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = ; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&pcc2 IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt deleted file mode 100644 index a747fabab7d3..000000000000 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ /dev/null @@ -1,110 +0,0 @@ -* Renesas R-Car Compare Match Timer (CMT) - -The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock -inputs and programmable compare match. - -Channels share hardware resources but their counter and compare match value -are independent. A particular CMT instance can implement only a subset of the -channels supported by the CMT model. Channel indices represent the hardware -position of the channel in the CMT and don't match the channel numbers in the -datasheets. - -Required Properties: - - - compatible: must contain one or more of the following: - - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. - - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. - - "renesas,r8a7740-cmt0" for the 32-bit CMT0 device included in r8a7740. - - "renesas,r8a7740-cmt1" for the 48-bit CMT1 device included in r8a7740. - - "renesas,r8a7740-cmt2" for the 32-bit CMT2 device included in r8a7740. - - "renesas,r8a7740-cmt3" for the 32-bit CMT3 device included in r8a7740. - - "renesas,r8a7740-cmt4" for the 32-bit CMT4 device included in r8a7740. - - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743. - - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743. - - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744. - - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744. - - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745. - - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745. - - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470. - - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. - - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. - - "renesas,r8a774a1-cmt1" for the 48-bit CMT devices included in r8a774a1. - - "renesas,r8a774b1-cmt0" for the 32-bit CMT0 device included in r8a774b1. - - "renesas,r8a774b1-cmt1" for the 48-bit CMT devices included in r8a774b1. - - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0. - - "renesas,r8a774c0-cmt1" for the 48-bit CMT devices included in r8a774c0. - - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. - - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791. - - "renesas,r8a7792-cmt0" for the 32-bit CMT0 device included in r8a7792. - - "renesas,r8a7792-cmt1" for the 48-bit CMT1 device included in r8a7792. - - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793. - - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. - - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. - - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. - - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795. - - "renesas,r8a7795-cmt1" for the 48-bit CMT devices included in r8a7795. - - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796. - - "renesas,r8a7796-cmt1" for the 48-bit CMT devices included in r8a7796. - - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965. - - "renesas,r8a77965-cmt1" for the 48-bit CMT devices included in r8a77965. - - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970. - - "renesas,r8a77970-cmt1" for the 48-bit CMT devices included in r8a77970. - - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980. - - "renesas,r8a77980-cmt1" for the 48-bit CMT devices included in r8a77980. - - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990. - - "renesas,r8a77990-cmt1" for the 48-bit CMT devices included in r8a77990. - - "renesas,r8a77995-cmt0" for the 32-bit CMT0 device included in r8a77995. - - "renesas,r8a77995-cmt1" for the 48-bit CMT devices included in r8a77995. - - "renesas,sh73a0-cmt0" for the 32-bit CMT0 device included in sh73a0. - - "renesas,sh73a0-cmt1" for the 48-bit CMT1 device included in sh73a0. - - "renesas,sh73a0-cmt2" for the 32-bit CMT2 device included in sh73a0. - - "renesas,sh73a0-cmt3" for the 32-bit CMT3 device included in sh73a0. - - "renesas,sh73a0-cmt4" for the 32-bit CMT4 device included in sh73a0. - - - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2 - and RZ/G1. - - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2 - and RZ/G1. - These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries - listed above. - - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3 - and RZ/G2. - - "renesas,rcar-gen3-cmt1" for 48-bit CMT devices included in R-Car Gen3 - and RZ/G2. - These are fallbacks for R-Car Gen3 and RZ/G2 entries listed - above. - - - reg: base address and length of the registers block for the timer module. - - interrupts: interrupt-specifier for the timer, one per channel. - - clocks: a list of phandle + clock-specifier pairs, one for each entry - in clock-names. - - clock-names: must contain "fck" for the functional clock. - - -Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes - - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 142 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp1_clks R8A7790_CLK_CMT0>; - clock-names = "fck"; - }; - - cmt1: timer@e6130000 { - compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7790_CLK_CMT1>; - clock-names = "fck"; - }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml new file mode 100644 index 000000000000..7e4dc5623da8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/renesas,cmt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Compare Match Timer (CMT) + +maintainers: + - Geert Uytterhoeven + - Laurent Pinchart + +description: + The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock + inputs and programmable compare match. + + Channels share hardware resources but their counter and compare match values + are independent. A particular CMT instance can implement only a subset of the + channels supported by the CMT model. Channel indices represent the hardware + position of the channel in the CMT and don't match the channel numbers in the + datasheets. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a7740-cmt0 # 32-bit CMT0 on R-Mobile A1 + - renesas,r8a7740-cmt1 # 48-bit CMT1 on R-Mobile A1 + - renesas,r8a7740-cmt2 # 32-bit CMT2 on R-Mobile A1 + - renesas,r8a7740-cmt3 # 32-bit CMT3 on R-Mobile A1 + - renesas,r8a7740-cmt4 # 32-bit CMT4 on R-Mobile A1 + - renesas,sh73a0-cmt0 # 32-bit CMT0 on SH-Mobile AG5 + - renesas,sh73a0-cmt1 # 48-bit CMT1 on SH-Mobile AG5 + - renesas,sh73a0-cmt2 # 32-bit CMT2 on SH-Mobile AG5 + - renesas,sh73a0-cmt3 # 32-bit CMT3 on SH-Mobile AG5 + - renesas,sh73a0-cmt4 # 32-bit CMT4 on SH-Mobile AG5 + + - items: + - enum: + - renesas,r8a73a4-cmt0 # 32-bit CMT0 on R-Mobile APE6 + - renesas,r8a7743-cmt0 # 32-bit CMT0 on RZ/G1M + - renesas,r8a7744-cmt0 # 32-bit CMT0 on RZ/G1N + - renesas,r8a7745-cmt0 # 32-bit CMT0 on RZ/G1E + - renesas,r8a77470-cmt0 # 32-bit CMT0 on RZ/G1C + - renesas,r8a7790-cmt0 # 32-bit CMT0 on R-Car H2 + - renesas,r8a7791-cmt0 # 32-bit CMT0 on R-Car M2-W + - renesas,r8a7792-cmt0 # 32-bit CMT0 on R-Car V2H + - renesas,r8a7793-cmt0 # 32-bit CMT0 on R-Car M2-N + - renesas,r8a7794-cmt0 # 32-bit CMT0 on R-Car E2 + - const: renesas,rcar-gen2-cmt0 # 32-bit CMT0 on R-Mobile APE6, R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,r8a73a4-cmt1 # 48-bit CMT1 on R-Mobile APE6 + - renesas,r8a7743-cmt1 # 48-bit CMT1 on RZ/G1M + - renesas,r8a7744-cmt1 # 48-bit CMT1 on RZ/G1N + - renesas,r8a7745-cmt1 # 48-bit CMT1 on RZ/G1E + - renesas,r8a77470-cmt1 # 48-bit CMT1 on RZ/G1C + - renesas,r8a7790-cmt1 # 48-bit CMT1 on R-Car H2 + - renesas,r8a7791-cmt1 # 48-bit CMT1 on R-Car M2-W + - renesas,r8a7792-cmt1 # 48-bit CMT1 on R-Car V2H + - renesas,r8a7793-cmt1 # 48-bit CMT1 on R-Car M2-N + - renesas,r8a7794-cmt1 # 48-bit CMT1 on R-Car E2 + - const: renesas,rcar-gen2-cmt1 # 48-bit CMT1 on R-Mobile APE6, R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,r8a774a1-cmt0 # 32-bit CMT0 on RZ/G2M + - renesas,r8a774b1-cmt0 # 32-bit CMT0 on RZ/G2N + - renesas,r8a774c0-cmt0 # 32-bit CMT0 on RZ/G2E + - renesas,r8a7795-cmt0 # 32-bit CMT0 on R-Car H3 + - renesas,r8a7796-cmt0 # 32-bit CMT0 on R-Car M3-W + - renesas,r8a77965-cmt0 # 32-bit CMT0 on R-Car M3-N + - renesas,r8a77970-cmt0 # 32-bit CMT0 on R-Car V3M + - renesas,r8a77980-cmt0 # 32-bit CMT0 on R-Car V3H + - renesas,r8a77990-cmt0 # 32-bit CMT0 on R-Car E3 + - renesas,r8a77995-cmt0 # 32-bit CMT0 on R-Car D3 + - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2 + + - items: + - enum: + - renesas,r8a774a1-cmt1 # 48-bit CMT on RZ/G2M + - renesas,r8a774b1-cmt1 # 48-bit CMT on RZ/G2N + - renesas,r8a774c0-cmt1 # 48-bit CMT on RZ/G2E + - renesas,r8a7795-cmt1 # 48-bit CMT on R-Car H3 + - renesas,r8a7796-cmt1 # 48-bit CMT on R-Car M3-W + - renesas,r8a77965-cmt1 # 48-bit CMT on R-Car M3-N + - renesas,r8a77970-cmt1 # 48-bit CMT on R-Car V3M + - renesas,r8a77980-cmt1 # 48-bit CMT on R-Car V3H + - renesas,r8a77990-cmt1 # 48-bit CMT on R-Car E3 + - renesas,r8a77995-cmt1 # 48-bit CMT on R-Car D3 + - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +allOf: + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-cmt0 + - renesas,rcar-gen3-cmt0 + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-cmt1 + - renesas,rcar-gen3-cmt1 + then: + properties: + interrupts: + minItems: 8 + maxItems: 8 + +additionalProperties: false + +examples: + - | + #include + #include + #include + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; + reg = <0xffca0000 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 124>; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; + reg = <0xe6130000 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 329>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt deleted file mode 100644 index ba0a34d97eb8..000000000000 --- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Renesas Multi-Function Timer Pulse Unit 2 (MTU2) - -The MTU2 is a multi-purpose, multi-channel timer/counter with configurable -clock inputs and programmable compare match. - -Channels share hardware resources but their counter and compare match value -are independent. The MTU2 hardware supports five channels indexed from 0 to 4. - -Required Properties: - - - compatible: must be one or more of the following: - - "renesas,mtu2-r7s72100" for the r7s72100 MTU2 - - "renesas,mtu2" for any MTU2 - This is a fallback for the above renesas,mtu2-* entries - - - reg: base address and length of the registers block for the timer module. - - - interrupts: interrupt specifiers for the timer, one for each entry in - interrupt-names. - - interrupt-names: must contain one entry named "tgi?a" for each enabled - channel, where "?" is the channel index expressed as one digit from "0" to - "4". - - - clocks: a list of phandle + clock-specifier pairs, one for each entry - in clock-names. - - clock-names: must contain "fck" for the functional clock. - - -Example: R7S72100 (RZ/A1H) MTU2 node - - mtu2: timer@fcff0000 { - compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; - reg = <0xfcff0000 0x400>; - interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>, - <0 146 IRQ_TYPE_LEVEL_HIGH>, - <0 150 IRQ_TYPE_LEVEL_HIGH>, - <0 154 IRQ_TYPE_LEVEL_HIGH>, - <0 159 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a"; - clocks = <&mstp3_clks R7S72100_CLK_MTU2>; - clock-names = "fck"; - }; diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml new file mode 100644 index 000000000000..15d8dddf4ae9 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/renesas,mtu2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Multi-Function Timer Pulse Unit 2 (MTU2) + +maintainers: + - Geert Uytterhoeven + - Laurent Pinchart + +description: + The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs + and programmable compare match. + + Channels share hardware resources but their counter and compare match value are + independent. The MTU2 hardware supports five channels indexed from 0 to 4. + +properties: + compatible: + items: + - enum: + - renesas,mtu2-r7s72100 # RZ/A1H + - const: renesas,mtu2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 5 + description: One entry for each enabled channel. + + interrupt-names: + minItems: 1 + items: + - const: tgi0a + - const: tgi1a + - const: tgi2a + - const: tgi3a + - const: tgi4a + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = ; + interrupt-names = "tgi0a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt deleted file mode 100644 index 81a78f8bcf17..000000000000 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Renesas OS Timer (OSTM) - -The OSTM is a multi-channel 32-bit timer/counter with fixed clock -source that can operate in either interval count down timer or free-running -compare match mode. - -Channels are independent from each other. - -Required Properties: - - - compatible: must be one or more of the following: - - "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM - - "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM - - "renesas,ostm" for any OSTM - This is a fallback for the above renesas,*-ostm entries - - - reg: base address and length of the register block for a timer channel. - - - interrupts: interrupt specifier for the timer channel. - - - clocks: clock specifier for the timer channel. - -Example: R7S72100 (RZ/A1H) OSTM node - - ostm0: timer@fcfec000 { - compatible = "renesas,r7s72100-ostm", "renesas,ostm"; - reg = <0xfcfec000 0x30>; - interrupts = ; - clocks = <&mstp5_clks R7S72100_CLK_OSTM0>; - power-domains = <&cpg_clocks>; - }; diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml new file mode 100644 index 000000000000..600d47ab7d58 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/renesas,ostm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas OS Timer (OSTM) + +maintainers: + - Chris Brandt + - Geert Uytterhoeven + +description: + The OSTM is a multi-channel 32-bit timer/counter with fixed clock source that + can operate in either interval count down timer or free-running compare match + mode. + + Channels are independent from each other. + +properties: + compatible: + items: + - enum: + - renesas,r7s72100-ostm # RZ/A1H + - renesas,r7s9210-ostm # RZ/A2M + - const: renesas,ostm # Generic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + ostm0: timer@fcfec000 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec000 0x30>; + interrupts = ; + clocks = <&mstp5_clks R7S72100_CLK_OSTM0>; + power-domains = <&cpg_clocks>; + }; diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml index c8a2a92074df..4d13e6bc1c50 100644 --- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml @@ -25,6 +25,20 @@ properties: power-domains: maxItems: 1 + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + required: - compatible - reg @@ -39,30 +53,39 @@ patternProperties: Documentation/devicetree/bindings/ufs/cdns,ufshc.txt for binding documentation of child node +additionalProperties: false + examples: - | #include #include - ufs_wrapper: ufs-wrapper@4e80000 { - compatible = "ti,j721e-ufs"; - reg = <0x0 0x4e80000 0x0 0x100>; - power-domains = <&k3_pds 277>; - clocks = <&k3_clks 277 1>; - assigned-clocks = <&k3_clks 277 1>; - assigned-clock-parents = <&k3_clks 277 4>; - #address-cells = <2>; - #size-cells = <2>; + bus { + #address-cells = <2>; + #size-cells = <2>; - ufs@4e84000 { - compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; - reg = <0x0 0x4e84000 0x0 0x10000>; - interrupts = ; - freq-table-hz = <19200000 19200000>; - power-domains = <&k3_pds 277>; - clocks = <&k3_clks 277 1>; - assigned-clocks = <&k3_clks 277 1>; - assigned-clock-parents = <&k3_clks 277 4>; - clock-names = "core_clk"; - }; + ufs-wrapper@4e80000 { + compatible = "ti,j721e-ufs"; + reg = <0x0 0x4e80000 0x0 0x100>; + power-domains = <&k3_pds 277>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + + ranges = <0x0 0x0 0x0 0x4e80000 0x0 0x14000>; + #address-cells = <2>; + #size-cells = <2>; + + ufs@4000 { + compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; + reg = <0x0 0x4000 0x0 0x10000>; + interrupts = ; + freq-table-hz = <19200000 19200000>; + power-domains = <&k3_pds 277>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + clock-names = "core_clk"; + }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index b0e5e0fe9386..f6d48f4a0116 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -111,7 +111,7 @@ examples: - | usb: usb@ffe09000 { compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; + reg = <0xffe09000 0xa0>; interrupts = <16>; #address-cells = <1>; #size-cells = <1>; @@ -147,4 +147,3 @@ examples: snps,quirk-frame-length-adjustment; }; }; - diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index 06399ba0d9e4..297fb77a5454 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -38,19 +38,17 @@ properties: aspeed,vhub-downstream-ports: description: Number of downstream ports supported by the Virtual Hub - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 5 - minimum: 1 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 5 + minimum: 1 + maximum: 7 aspeed,vhub-generic-endpoints: description: Number of generic endpoints supported by the Virtual Hub - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 15 - minimum: 1 - maximum: 21 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 15 + minimum: 1 + maximum: 21 required: - compatible diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 0d6d850a7f17..9352a8ef60a6 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -62,14 +62,14 @@ properties: resets: items: - - description: common reset - - description: ecc reset + - description: common reset + - description: ecc reset minItems: 1 reset-names: items: - - const: dwc2 - - const: dwc2-ecc + - const: dwc2 + - const: dwc2-ecc minItems: 1 phys: @@ -78,6 +78,9 @@ properties: phy-names: const: usb2-phy + power-domains: + maxItems: 1 + vbus-supply: description: reference to the VBUS regulator. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt deleted file mode 100644 index 335589895763..000000000000 --- a/Documentation/devicetree/bindings/usb/ehci-mv.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Marvell PXA/MMP EHCI controller. - -Required properties: - -- compatible: must be "marvell,pxau2o-ehci" -- reg: physical base addresses of the controller and length of memory mapped region -- interrupts: one EHCI controller interrupt should be described here -- clocks: phandle list of usb clocks -- clock-names: should be "USBCLK" -- phys: phandle for the PHY device -- phy-names: should be "usb" - -Example: - - ehci0: usb-ehci@d4208000 { - compatible = "marvell,pxau2o-ehci"; - reg = <0xd4208000 0x200>; - interrupts = <44>; - clocks = <&soc_clocks MMP2_CLK_USB>; - clock-names = "USBCLK"; - phys = <&usb_otg_phy>; - phy-names = "usb"; - }; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 10edd05872ea..69f3f26d1207 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -6,19 +6,30 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: USB EHCI Controller Device Tree Bindings -allOf: - - $ref: "usb-hcd.yaml" - maintainers: - Greg Kroah-Hartman +allOf: + - $ref: "usb-hcd.yaml" + - if: + properties: + compatible: + not: + contains: + const: ibm,usb-ehci-440epx + then: + properties: + reg: + maxItems: 1 + properties: compatible: contains: const: generic-ehci reg: - maxItems: 1 + minItems: 1 + maxItems: 2 interrupts: maxItems: 1 @@ -36,6 +47,9 @@ properties: - if a USB DRD channel: first clock should be host and second one should be peripheral + power-domains: + maxItems: 1 + big-endian: $ref: /schemas/types.yaml#/definitions/flag description: @@ -74,6 +88,9 @@ properties: phy-names: const: usb + iommus: + maxItems: 1 + required: - compatible - reg @@ -87,7 +104,7 @@ examples: compatible = "ibm,usb-ehci-440epx", "generic-ehci"; interrupt-parent = <&UIC0>; interrupts = <0x1a 4>; - reg = <0 0xe0000300 90 0 0xe0000390 70>; + reg = <0xe0000300 90>, <0xe0000390 70>; big-endian; }; diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index bcffec1f1341..2178bcc401bc 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -36,6 +36,9 @@ properties: - if a USB DRD channel: first clock should be host and second one should be peripheral + power-domains: + maxItems: 1 + big-endian: $ref: /schemas/types.yaml#/definitions/flag description: @@ -73,6 +76,9 @@ properties: phy-names: const: usb + iommus: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index c2d2ee43ba67..c334aea6b59d 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -42,6 +42,9 @@ properties: phys: description: PHY specifier for the USB PHY + usb-role-switch: + type: boolean + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml new file mode 100644 index 000000000000..3cf93dd45eb7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA/MMP EHCI bindings + +maintainers: + - Lubomir Rintel + +allOf: + - $ref: usb-hcd.yaml# + +properties: + compatible: + const: marvell,pxau2o-ehci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: USBCLK + + phys: + maxItems: 1 + + phy-names: + const: usb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + +unevaluatedProperties: false + +examples: + - | + #include + usb@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <44>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy>; + phy-names = "usb"; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index b84ed8ee8cfc..d814d2db19ee 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -163,9 +163,9 @@ examples: usb@700d0000 { compatible = "nvidia,tegra210-xudc"; - reg = <0x0 0x700d0000 0x0 0x8000>, - <0x0 0x700d8000 0x0 0x1000>, - <0x0 0x700d9000 0x0 0x1000>; + reg = <0x700d0000 0x8000>, + <0x700d8000 0x1000>, + <0x700d9000 0x1000>; reg-names = "base", "fpci", "ipfs"; interrupts = ; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt deleted file mode 100644 index fbdd01756752..000000000000 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: Compatible list, contains - "qcom,dwc3" - "qcom,msm8996-dwc3" for msm8996 SOC. - "qcom,msm8998-dwc3" for msm8998 SOC. - "qcom,sdm845-dwc3" for sdm845 SOC. -- reg: Offset and length of register set for QSCRATCH wrapper -- power-domains: specifies a phandle to PM domain provider node -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "core" Master/Core clock, have to be >= 125 MHz for SS - operation and >= 60MHz for HS operation - "mock_utmi" Mock utmi clock needed for ITP/SOF generation in - host mode. Its frequency should be 19.2MHz. - "sleep" Sleep clock, used for wakeup when USB3 core goes - into low power mode (U3). - -Optional clocks: - "iface" System bus AXI clock. - Not present on "qcom,msm8996-dwc3" compatible. - "cfg_noc" System Config NOC clock. - Not present on "qcom,msm8996-dwc3" compatible. -- assigned-clocks: Should be: - MOCK_UTMI_CLK - MASTER_CLK -- assigned-clock-rates: Should be: - 19.2Mhz (192000000) for MOCK_UTMI_CLK - >=125Mhz (125000000) for MASTER_CLK in SS mode - >=60Mhz (60000000) for MASTER_CLK in HS mode - -Optional properties: -- resets: Phandle to reset control that resets core and wrapper. -- interrupts: specifies interrupts from controller wrapper used - to wakeup from low power/susepnd state. Must contain - one or more entry for interrupt-names property -- interrupt-names: Must include the following entries: - - "hs_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB2 bus - - "ss_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB3 bus - - "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate - interrupts for any wakeup event on DM and DP lines -- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement. - Used when dwc3 operates without SSPHY and only - HS/FS/LS modes are supported. - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY -Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY - -Example device nodes: - - hs_phy: phy@100f8800 { - compatible = "qcom,qusb2-v2-phy"; - ... - }; - - ss_phy: phy@100f8830 { - compatible = "qcom,qmp-v3-usb3-phy"; - ... - }; - - usb3_0: usb30@a6f8800 { - compatible = "qcom,dwc3"; - reg = <0xa6f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "core", "mock_utmi", "sleep"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <133000000>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - reset-names = "core_reset"; - power-domains = <&gcc USB30_PRIM_GDSC>; - qcom,select-utmi-as-pipe-clk; - - dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = <0 205 0x4>; - phys = <&hs_phy>, <&ss_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - }; - }; - diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml new file mode 100644 index 000000000000..dac10848dd7f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SuperSpeed DWC3 USB SoC controller + +maintainers: + - Manu Gautam + +properties: + compatible: + items: + - enum: + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sc7180-dwc3 + - qcom,sdm845-dwc3 + - const: qcom,dwc3 + + reg: + description: Offset and length of register set for QSCRATCH wrapper + maxItems: 1 + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: System Config NOC clock. + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + - description: System bus AXI clock. + - description: Mock utmi clock needed for ITP/SOF generation + in host mode. Its frequency should be 19.2MHz. + - description: Sleep clock, used for wakeup when + USB3 core goes into low power mode (U3). + + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: mock_utmi + - const: sleep + + assigned-clocks: + items: + - description: Phandle and clock specifier of MOCK_UTMI_CLK. + - description: Phandle and clock specifoer of MASTER_CLK. + + assigned-clock-rates: + items: + - description: Must be 19.2MHz (19200000). + - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. + resets: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: usb-ddr + - const: apps-usb + + interrupts: + items: + - description: The interrupt that is asserted + when a wakeup event is received on USB2 bus. + - description: The interrupt that is asserted + when a wakeup event is received on USB3 bus. + - description: Wakeup event on DM line. + - description: Wakeup event on DP line. + + interrupt-names: + items: + - const: hs_phy_irq + - const: ss_phy_irq + - const: dm_hs_phy_irq + - const: dp_hs_phy_irq + + qcom,select-utmi-as-pipe-clk: + description: + If present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. + type: boolean + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - power-domains + - clocks + - clock-names + - interrupts + - interrupt-names + +examples: + - | + #include + #include + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + + usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index 031452aa25bc..e3cdeab1199f 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -73,7 +73,7 @@ examples: usb3_peri0: usb@ee020000 { compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri"; - reg = <0 0xee020000 0 0x400>; + reg = <0xee020000 0x400>; interrupts = ; clocks = <&cpg CPG_MOD 328>; companion = <&xhci0>; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index a7ae95598ccb..af4826fb6824 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -22,6 +22,7 @@ properties: - items: - enum: + - renesas,usbhs-r8a7742 # RZ/G1H - renesas,usbhs-r8a7743 # RZ/G1M - renesas,usbhs-r8a7744 # RZ/G1N - renesas,usbhs-r8a7745 # RZ/G1E @@ -121,7 +122,7 @@ examples: usbhs: usb@e6590000 { compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; + reg = <0xe6590000 0x100>; interrupts = ; clocks = <&cpg CPG_MOD 704>; }; diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 5f5264b2e9ad..90750255792f 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -57,30 +57,36 @@ examples: - | #include #include - cdns_usb@4104000 { - compatible = "ti,j721e-usb"; - reg = <0x00 0x4104000 0x00 0x100>; - power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 288 15>, <&k3_clks 288 3>; - clock-names = "ref", "lpm"; - assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */ - assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */ - #address-cells = <2>; - #size-cells = <2>; - usb@6000000 { - compatible = "cdns,usb3"; - reg = <0x00 0x6000000 0x00 0x10000>, - <0x00 0x6010000 0x00 0x10000>, - <0x00 0x6020000 0x00 0x10000>; - reg-names = "otg", "xhci", "dev"; - interrupts = , /* irq.0 */ - , /* irq.6 */ - ; /* otgirq.0 */ - interrupt-names = "host", - "peripheral", - "otg"; - maximum-speed = "super-speed"; - dr_mode = "otg"; + bus { + #address-cells = <2>; + #size-cells = <2>; + + cdns_usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 15>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + + usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = , /* irq.0 */ + , /* irq.6 */ + ; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt deleted file mode 100644 index ec80641208a5..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -USB GPIO Based Connection Detection - -This is typically used to switch dual role mode from the USB ID pin connected -to an input GPIO, and also used to enable/disable device mode from the USB -Vbus pin connected to an input GPIO. - -Required properties: -- compatible : should include "gpio-usb-b-connector" and "usb-b-connector". -- id-gpios, vbus-gpios : input gpios, either one of them must be present, - and both can be present as well. - see connector/usb-connector.yaml - -Optional properties: -- vbus-supply : can be present if needed when supports dual role mode. - see connector/usb-connector.yaml - -- Sub-nodes: - - port : can be present. - see graph.txt - -Example: - -&mtu3 { - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb_p0_vbus>; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index dc025f126d71..4473c9898d31 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -7,6 +7,7 @@ Required properties: - "marvell,armada3700-xhci" for Armada 37xx SoCs - "marvell,armada-375-xhci" for Armada 375 SoCs - "marvell,armada-380-xhci" for Armada 38x SoCs + - "renesas,xhci-r8a7742" for r8a7742 SoC - "renesas,xhci-r8a7743" for r8a7743 SoC - "renesas,xhci-r8a7744" for r8a7744 SoC - "renesas,xhci-r8a774a1" for r8a774a1 SoC diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 997934c58f9a..ef6d75b9113a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -59,6 +59,8 @@ patternProperties: description: Allwinner Technology Co., Ltd. "^alphascale,.*": description: AlphaScale Integrated Circuits Systems, Inc. + "^alps,.*": + description: Alps Electric Co., Ltd. "^altr,.*": description: Altera Corp. "^amarula,.*": @@ -131,6 +133,8 @@ patternProperties: description: Shanghai AVIC Optoelectronics Co., Ltd. "^avnet,.*": description: Avnet, Inc. + "^awinic,.*": + description: Shanghai Awinic Technology Co., Ltd. "^axentia,.*": description: Axentia Technologies AB "^axis,.*": @@ -139,10 +143,14 @@ patternProperties: description: Azoteq (Pty) Ltd "^azw,.*": description: Shenzhen AZW Technology Co., Ltd. + "^baikal,.*": + description: BAIKAL ELECTRONICS, JSC "^bananapi,.*": description: BIPAI KEJI LIMITED "^beacon,.*": description: Compass Electronics Group, LLC + "^beagle,.*": + description: BeagleBoard.org Foundation "^bhf,.*": description: Beckhoff Automation GmbH & Co. KG "^bitmain,.*": @@ -181,6 +189,8 @@ patternProperties: description: CDTech(H.K.) Electronics Limited "^ceva,.*": description: Ceva, Inc. + "^checkpoint,.*": + description: Check Point Software Technologies Ltd. "^chipidea,.*": description: Chipidea, Inc "^chipone,.*": @@ -589,6 +599,8 @@ patternProperties: description: LSI Corp. (LSI Logic) "^lwn,.*": description: Liebherr-Werk Nenzing GmbH + "^lxa,.*": + description: Linux Automation GmbH "^macnica,.*": description: Macnica Americas "^mapleboard,.*": @@ -814,6 +826,8 @@ patternProperties: description: Primux Trading, S.L. "^probox2,.*": description: PROBOX2 (by W2COMP Co., Ltd.) + "^prt,.*": + description: Protonic Holland "^pulsedlight,.*": description: PulsedLight, Inc "^purism,.*": @@ -906,6 +920,8 @@ patternProperties: description: Sharp Corporation "^shimafuji,.*": description: Shimafuji Electric, Inc. + "^shiratech,.*": + description: Shiratech Solutions "^si-en,.*": description: Si-En Technology Ltd. "^si-linux,.*": @@ -924,6 +940,8 @@ patternProperties: description: Silead Inc. "^silergy,.*": description: Silergy Corp. + "^silex-insight,.*": + description: Silex Insight "^siliconmitus,.*": description: Silicon Mitus, Inc. "^simtek,.*": @@ -942,6 +960,8 @@ patternProperties: description: Sitronix Technology Corporation "^skyworks,.*": description: Skyworks Solutions, Inc. + "^smartlabs,.*": + description: SmartLabs LLC "^smsc,.*": description: Standard Microsystems Corporation "^snps,.*": @@ -1053,6 +1073,8 @@ patternProperties: description: Tyan Computer Corporation "^u-blox,.*": description: u-blox + "^u-boot,.*": + description: U-Boot bootloader "^ucrobotics,.*": description: uCRobotics "^ubnt,.*": @@ -1073,6 +1095,8 @@ patternProperties: description: Aigo Digital Technology Co., Ltd. "^v3,.*": description: V3 Semiconductor + "^vaisala,.*": + description: Vaisala "^vamrs,.*": description: Vamrs Ltd. "^variscite,.*": @@ -1101,6 +1125,8 @@ patternProperties: description: Waveshare Electronics "^wd,.*": description: Western Digital Corp. + "^we,.*": + description: Würth Elektronik GmbH. "^wetek,.*": description: WeTek Electronics, limited. "^wexler,.*": @@ -1133,6 +1159,8 @@ patternProperties: description: Shenzhen Xinpeng Technology Co., Ltd "^xlnx,.*": description: Xilinx + "^xnano,.*": + description: Xnano "^xunlong,.*": description: Shenzhen Xunlong Software CO.,Limited "^xylon,.*": diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt deleted file mode 100644 index adc6b76fcb3a..000000000000 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Freescale i.MX Watchdog Timer (WDT) Controller - -Required properties: -- compatible : Should be "fsl,-wdt" -- reg : Should contain WDT registers location and length -- interrupts : Should contain WDT interrupt - -Optional properties: -- big-endian: If present the watchdog device's registers are implemented - in big endian mode, otherwise in native mode(same with CPU), for more - detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. -- fsl,ext-reset-output: If present the watchdog device is configured to - assert its external reset (WDOG_B) instead of issuing a software reset. -- timeout-sec : Contains the watchdog timeout in seconds - -Examples: - -wdt@73f98000 { - compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; - reg = <0x73f98000 0x4000>; - interrupts = <58>; - big-endian; - timeout-sec = <20>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml new file mode 100644 index 000000000000..d96b93b11fad --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX Watchdog Timer (WDT) Controller + +maintainers: + - Anson Huang + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + enum: + - fsl,imx21-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + fsl,ext-reset-output: + $ref: /schemas/types.yaml#/definitions/flag + description: | + If present, the watchdog device is configured to assert its + external reset (WDOG_B) instead of issuing a software reset. + +required: + - compatible + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + watchdog@20bc000 { + compatible = "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG>; + }; + +... diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt deleted file mode 100644 index f902508d6cac..000000000000 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale i.MX7ULP Watchdog Timer (WDT) Controller - -Required properties: -- compatible : Should be "fsl,imx7ulp-wdt" -- reg : Should contain WDT registers location and length -- interrupts : Should contain WDT interrupt -- clocks: Should contain a phandle pointing to the gated peripheral clock. - -Optional properties: -- timeout-sec : Contains the watchdog timeout in seconds - -Examples: - -wdog1: watchdog@403d0000 { - compatible = "fsl,imx7ulp-wdt"; - reg = <0x403d0000 0x10000>; - interrupts = ; - clocks = <&pcc2 IMX7ULP_CLK_WDG1>; - assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; - assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; - timeout-sec = <40>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml new file mode 100644 index 000000000000..51d6d482bbc2 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/fsl-imx7ulp-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP Watchdog Timer (WDT) Controller + +maintainers: + - Anson Huang + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + enum: + - fsl,imx7ulp-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + assigned-clocks: + maxItems: 1 + + assigned-clocks-parents: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - interrupts + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include + #include + + watchdog@403d0000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x403d0000 0x10000>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + }; + +... diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt deleted file mode 100644 index e42fd3019cb7..000000000000 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt +++ /dev/null @@ -1,51 +0,0 @@ -Renesas Watchdog Timer (WDT) Controller - -Required properties: - - compatible : Must be "renesas,-wdt", followed by a generic - fallback compatible string when compatible with the generic - version. - Examples with soctypes are: - - "renesas,r8a7742-wdt" (RZ/G1H) - - "renesas,r8a7743-wdt" (RZ/G1M) - - "renesas,r8a7744-wdt" (RZ/G1N) - - "renesas,r8a7745-wdt" (RZ/G1E) - - "renesas,r8a77470-wdt" (RZ/G1C) - - "renesas,r8a774a1-wdt" (RZ/G2M) - - "renesas,r8a774b1-wdt" (RZ/G2N) - - "renesas,r8a774c0-wdt" (RZ/G2E) - - "renesas,r8a7790-wdt" (R-Car H2) - - "renesas,r8a7791-wdt" (R-Car M2-W) - - "renesas,r8a7792-wdt" (R-Car V2H) - - "renesas,r8a7793-wdt" (R-Car M2-N) - - "renesas,r8a7794-wdt" (R-Car E2) - - "renesas,r8a7795-wdt" (R-Car H3) - - "renesas,r8a7796-wdt" (R-Car M3-W) - - "renesas,r8a77961-wdt" (R-Car M3-W+) - - "renesas,r8a77965-wdt" (R-Car M3-N) - - "renesas,r8a77970-wdt" (R-Car V3M) - - "renesas,r8a77990-wdt" (R-Car E3) - - "renesas,r8a77995-wdt" (R-Car D3) - - "renesas,r7s72100-wdt" (RZ/A1) - - "renesas,r7s9210-wdt" (RZ/A2) - The generic compatible string must be: - - "renesas,rza-wdt" for RZ/A - - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1 - - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2 - -- reg : Should contain WDT registers location and length -- clocks : the clock feeding the watchdog timer. - -Optional properties: -- timeout-sec : Contains the watchdog timeout in seconds -- power-domains : the power domain the WDT belongs to -- interrupts: Some WDTs have an interrupt when used in interval timer mode - -Examples: - - wdt0: watchdog@e6020000 { - compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; - reg = <0 0xe6020000 0 0x0c>; - clocks = <&cpg CPG_MOD 402>; - power-domains = <&cpg>; - timeout-sec = <60>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml new file mode 100644 index 000000000000..572f4c912fef --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Watchdog Timer (WDT) Controller + +maintainers: + - Wolfram Sang + - Geert Uytterhoeven + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r7s72100-wdt # RZ/A1 + - renesas,r7s9210-wdt # RZ/A2 + - const: renesas,rza-wdt # RZ/A + + - items: + - enum: + - renesas,r8a7742-wdt # RZ/G1H + - renesas,r8a7743-wdt # RZ/G1M + - renesas,r8a7744-wdt # RZ/G1N + - renesas,r8a7745-wdt # RZ/G1E + - renesas,r8a77470-wdt # RZ/G1C + - renesas,r8a7790-wdt # R-Car H2 + - renesas,r8a7791-wdt # R-Car M2-W + - renesas,r8a7792-wdt # R-Car V2H + - renesas,r8a7793-wdt # R-Car M2-N + - renesas,r8a7794-wdt # R-Car E2 + - const: renesas,rcar-gen2-wdt # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,r8a774a1-wdt # RZ/G2M + - renesas,r8a774b1-wdt # RZ/G2N + - renesas,r8a774c0-wdt # RZ/G2E + - renesas,r8a7795-wdt # R-Car H3 + - renesas,r8a7796-wdt # R-Car M3-W + - renesas,r8a77961-wdt # R-Car M3-W+ + - renesas,r8a77965-wdt # R-Car M3-N + - renesas,r8a77970-wdt # R-Car V3M + - renesas,r8a77980-wdt # R-Car V3H + - renesas,r8a77990-wdt # R-Car E3 + - renesas,r8a77995-wdt # R-Car D3 + - const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - clocks + +if: + not: + properties: + compatible: + contains: + enum: + - renesas,rza-wdt +then: + required: + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include + #include + wdt0: watchdog@e6020000 { + compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; + reg = <0xe6020000 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 402>; + timeout-sec = <60>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml new file mode 100644 index 000000000000..a059d16cb4f2 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/socionext,uniphier-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier watchdog timer + +maintainers: + - Keiji Hayashibara + +allOf: + - $ref: "watchdog.yaml#" + +properties: + compatible: + const: socionext,uniphier-wdt + +required: + - compatible + +additionalProperties: false + +examples: + - | + // The UniPhier watchdog should be a subnode of a "syscon" compatible node. + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld11-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml index e83026fef2e9..f0452791c598 100644 --- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml @@ -57,7 +57,7 @@ examples: watchdog0: rti@2200000 { compatible = "ti,rti-wdt"; - reg = <0x0 0x2200000 0x0 0x100>; + reg = <0x2200000 0x100>; clocks = <&k3_clks 252 1>; power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 252 1>; diff --git a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt b/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt deleted file mode 100644 index bf6337546dd1..000000000000 --- a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt +++ /dev/null @@ -1,20 +0,0 @@ -UniPhier watchdog timer controller - -This UniPhier watchdog timer controller must be under sysctrl node. - -Required properties: -- compatible: should be "socionext,uniphier-wdt" - -Example: - - sysctrl@61840000 { - compatible = "socionext,uniphier-ld11-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - watchdog { - compatible = "socionext,uniphier-wdt"; - } - - other nodes ... - }; diff --git a/Documentation/devicetree/bindings/writing-bindings.txt b/Documentation/devicetree/bindings/writing-bindings.rst similarity index 89% rename from Documentation/devicetree/bindings/writing-bindings.txt rename to Documentation/devicetree/bindings/writing-bindings.rst index 27dfd2d8016e..45ff426d0019 100644 --- a/Documentation/devicetree/bindings/writing-bindings.txt +++ b/Documentation/devicetree/bindings/writing-bindings.rst @@ -1,13 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================ DOs and DON'Ts for designing and writing Devicetree bindings +============================================================ This is a list of common review feedback items focused on binding design. With every rule, there are exceptions and bindings have many gray areas. For guidelines related to patches, see -Documentation/devicetree/bindings/submitting-patches.txt +Documentation/devicetree/bindings/submitting-patches.rst Overall design +============== - DO attempt to make bindings complete even if a driver doesn't support some features. For example, if a device has an interrupt, then include the @@ -32,6 +37,7 @@ Overall design Properties +========== - DO make 'compatible' properties specific. DON'T use wildcards in compatible strings. DO use fallback compatibles when devices are the same as or a subset @@ -53,6 +59,7 @@ Properties Board/SoC .dts Files +==================== - DO put all MMIO devices under a bus node and not at the top-level. diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt index d058ace29345..28199b31fe5e 100644 --- a/Documentation/devicetree/bindings/xilinx.txt +++ b/Documentation/devicetree/bindings/xilinx.txt @@ -86,149 +86,6 @@ xlnx,use-parity = <0>; }; - Some IP cores actually implement 2 or more logical devices. In - this case, the device should still describe the whole IP core with - a single node and add a child node for each logical device. The - ranges property can be used to translate from parent IP-core to the - registers of each device. In addition, the parent node should be - compatible with the bus type 'xlnx,compound', and should contain - #address-cells and #size-cells, as with any other bus. (Note: this - makes the assumption that both logical devices have the same bus - binding. If this is not true, then separate nodes should be used - for each logical device). The 'cell-index' property can be used to - enumerate logical devices within an IP core. For example, the - following is the system.mhs entry for the dual ps2 controller found - on the ml403 reference design. - - BEGIN opb_ps2_dual_ref - PARAMETER INSTANCE = opb_ps2_dual_ref_0 - PARAMETER HW_VER = 1.00.a - PARAMETER C_BASEADDR = 0xA9000000 - PARAMETER C_HIGHADDR = 0xA9001FFF - BUS_INTERFACE SOPB = opb_v20_0 - PORT Sys_Intr1 = ps2_1_intr - PORT Sys_Intr2 = ps2_2_intr - PORT Clkin1 = ps2_clk_rx_1 - PORT Clkin2 = ps2_clk_rx_2 - PORT Clkpd1 = ps2_clk_tx_1 - PORT Clkpd2 = ps2_clk_tx_2 - PORT Rx1 = ps2_d_rx_1 - PORT Rx2 = ps2_d_rx_2 - PORT Txpd1 = ps2_d_tx_1 - PORT Txpd2 = ps2_d_tx_2 - END - - It would result in the following device tree nodes: - - opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ranges = <0 a9000000 2000>; - // If this device had extra parameters, then they would - // go here. - ps2@0 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <0 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - ps2@1000 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <1000 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - }; - - Also, the system.mhs file defines bus attachments from the processor - to the devices. The device tree structure should reflect the bus - attachments. Again an example; this system.mhs fragment: - - BEGIN ppc405_virtex4 - PARAMETER INSTANCE = ppc405_0 - PARAMETER HW_VER = 1.01.a - BUS_INTERFACE DPLB = plb_v34_0 - BUS_INTERFACE IPLB = plb_v34_0 - END - - BEGIN opb_intc - PARAMETER INSTANCE = opb_intc_0 - PARAMETER HW_VER = 1.00.c - PARAMETER C_BASEADDR = 0xD1000FC0 - PARAMETER C_HIGHADDR = 0xD1000FDF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN opb_uart16550 - PARAMETER INSTANCE = opb_uart16550_0 - PARAMETER HW_VER = 1.00.d - PARAMETER C_BASEADDR = 0xa0000000 - PARAMETER C_HIGHADDR = 0xa0001FFF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN plb_v34 - PARAMETER INSTANCE = plb_v34_0 - PARAMETER HW_VER = 1.02.a - END - - BEGIN plb_bram_if_cntlr - PARAMETER INSTANCE = plb_bram_if_cntlr_0 - PARAMETER HW_VER = 1.00.b - PARAMETER C_BASEADDR = 0xFFFF0000 - PARAMETER C_HIGHADDR = 0xFFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - END - - BEGIN plb2opb_bridge - PARAMETER INSTANCE = plb2opb_bridge_0 - PARAMETER HW_VER = 1.01.a - PARAMETER C_RNG0_BASEADDR = 0x20000000 - PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF - PARAMETER C_RNG1_BASEADDR = 0x60000000 - PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF - PARAMETER C_RNG2_BASEADDR = 0x80000000 - PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF - PARAMETER C_RNG3_BASEADDR = 0xC0000000 - PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - BUS_INTERFACE MOPB = opb_v20_0 - END - - Gives this device tree (some properties removed for clarity): - - plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v34-1.02.a"; - device_type = "ibm,plb"; - ranges; // 1:1 translation - - plb_bram_if_cntrl_0: bram@ffff0000 { - reg = ; - } - - opb@20000000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <20000000 20000000 20000000 - 60000000 60000000 20000000 - 80000000 80000000 40000000 - c0000000 c0000000 20000000>; - - opb_uart16550_0: serial@a0000000 { - reg = ; - }; - - opb_intc_0: interrupt-controller@d1000fc0 { - reg = ; - }; - }; - }; - That covers the general approach to binding xilinx IP cores into the device tree. The following are bindings for specific devices: diff --git a/Documentation/devicetree/changesets.txt b/Documentation/devicetree/changesets.rst similarity index 59% rename from Documentation/devicetree/changesets.txt rename to Documentation/devicetree/changesets.rst index cb488eeb6353..c7fd8cd6a270 100644 --- a/Documentation/devicetree/changesets.txt +++ b/Documentation/devicetree/changesets.rst @@ -1,3 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +DT Changesets +============= + A DT changeset is a method which allows one to apply changes in the live tree in such a way that either the full set of changes will be applied, or none of them will be. If an error occurs partway @@ -15,17 +21,17 @@ The sequence of a changeset is as follows. 1. of_changeset_init() - initializes a changeset 2. A number of DT tree change calls, of_changeset_attach_node(), -of_changeset_detach_node(), of_changeset_add_property(), -of_changeset_remove_property, of_changeset_update_property() to prepare -a set of changes. No changes to the active tree are made at this point. -All the change operations are recorded in the of_changeset 'entries' -list. + of_changeset_detach_node(), of_changeset_add_property(), + of_changeset_remove_property, of_changeset_update_property() to prepare + a set of changes. No changes to the active tree are made at this point. + All the change operations are recorded in the of_changeset 'entries' + list. 3. of_changeset_apply() - Apply the changes to the tree. Either the -entire changeset will get applied, or if there is an error the tree will -be restored to the previous state. The core ensures proper serialization -through locking. An unlocked version __of_changeset_apply is available, -if needed. + entire changeset will get applied, or if there is an error the tree will + be restored to the previous state. The core ensures proper serialization + through locking. An unlocked version __of_changeset_apply is available, + if needed. If a successfully applied changeset needs to be removed, it can be done with of_changeset_revert(). diff --git a/Documentation/devicetree/dynamic-resolution-notes.txt b/Documentation/devicetree/dynamic-resolution-notes.rst similarity index 90% rename from Documentation/devicetree/dynamic-resolution-notes.txt rename to Documentation/devicetree/dynamic-resolution-notes.rst index c24ec366c5dc..570b7e1f39eb 100644 --- a/Documentation/devicetree/dynamic-resolution-notes.txt +++ b/Documentation/devicetree/dynamic-resolution-notes.rst @@ -1,5 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== Device Tree Dynamic Resolver Notes ----------------------------------- +================================== This document describes the implementation of the in-kernel Device Tree resolver, residing in drivers/of/resolver.c diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst new file mode 100644 index 000000000000..54026763916d --- /dev/null +++ b/Documentation/devicetree/index.rst @@ -0,0 +1,17 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +Open Firmware and Device Tree +============================= + +.. toctree:: + :maxdepth: 1 + + usage-model + writing-schema + changesets + dynamic-resolution-notes + of_unittest + overlay-notes + + bindings/index diff --git a/Documentation/devicetree/of_unittest.txt b/Documentation/devicetree/of_unittest.rst similarity index 54% rename from Documentation/devicetree/of_unittest.txt rename to Documentation/devicetree/of_unittest.rst index 3e4e7d48ae93..dea05214f3ad 100644 --- a/Documentation/devicetree/of_unittest.txt +++ b/Documentation/devicetree/of_unittest.rst @@ -1,9 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== Open Firmware Device Tree Unittest ----------------------------------- +================================== Author: Gaurav Minocha 1. Introduction +=============== This document explains how the test data required for executing OF unittest is attached to the live tree dynamically, independent of the machine's @@ -11,8 +15,8 @@ architecture. It is recommended to read the following documents before moving ahead. -[1] Documentation/devicetree/usage-model.txt -[2] http://www.devicetree.org/Device_Tree_Usage +(1) Documentation/devicetree/usage-model.rst +(2) http://www.devicetree.org/Device_Tree_Usage OF Selftest has been designed to test the interface (include/linux/of.h) provided to device driver developers to fetch the device information..etc. @@ -21,79 +25,82 @@ most of the device drivers in various use cases. 2. Test-data +============ The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains the test data required for executing the unit tests automated in drivers/of/unittest.c. Currently, following Device Tree Source Include files -(.dtsi) are included in testcases.dts: +(.dtsi) are included in testcases.dts:: -drivers/of/unittest-data/tests-interrupts.dtsi -drivers/of/unittest-data/tests-platform.dtsi -drivers/of/unittest-data/tests-phandle.dtsi -drivers/of/unittest-data/tests-match.dtsi + drivers/of/unittest-data/tests-interrupts.dtsi + drivers/of/unittest-data/tests-platform.dtsi + drivers/of/unittest-data/tests-phandle.dtsi + drivers/of/unittest-data/tests-match.dtsi -When the kernel is build with OF_SELFTEST enabled, then the following make rule +When the kernel is build with OF_SELFTEST enabled, then the following make +rule:: -$(obj)/%.dtb: $(src)/%.dts FORCE - $(call if_changed_dep, dtc) + $(obj)/%.dtb: $(src)/%.dts FORCE + $(call if_changed_dep, dtc) is used to compile the DT source file (testcases.dts) into a binary blob (testcases.dtb), also referred as flattened DT. After that, using the following rule the binary blob above is wrapped as an -assembly file (testcases.dtb.S). +assembly file (testcases.dtb.S):: -$(obj)/%.dtb.S: $(obj)/%.dtb - $(call cmd, dt_S_dtb) + $(obj)/%.dtb.S: $(obj)/%.dtb + $(call cmd, dt_S_dtb) The assembly file is compiled into an object file (testcases.dtb.o), and is linked into the kernel image. 2.1. Adding the test data +------------------------- Un-flattened device tree structure: Un-flattened device tree consists of connected device_node(s) in form of a tree -structure described below. +structure described below:: -// following struct members are used to construct the tree -struct device_node { - ... - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - ... - }; + // following struct members are used to construct the tree + struct device_node { + ... + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + ... + }; Figure 1, describes a generic structure of machine's un-flattened device tree considering only child and sibling pointers. There exists another pointer, -*parent, that is used to traverse the tree in the reverse direction. So, at +``*parent``, that is used to traverse the tree in the reverse direction. So, at a particular level the child node and all the sibling nodes will have a parent pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's -parent points to root node) +parent points to root node):: -root ('/') - | -child1 -> sibling2 -> sibling3 -> sibling4 -> null - | | | | - | | | null - | | | - | | child31 -> sibling32 -> null - | | | | - | | null null - | | - | child21 -> sibling22 -> sibling23 -> null - | | | | - | null null null - | -child11 -> sibling12 -> sibling13 -> sibling14 -> null - | | | | - | | | null - | | | - null null child131 -> null - | - null + root ('/') + | + child1 -> sibling2 -> sibling3 -> sibling4 -> null + | | | | + | | | null + | | | + | | child31 -> sibling32 -> null + | | | | + | | null null + | | + | child21 -> sibling22 -> sibling23 -> null + | | | | + | null null null + | + child11 -> sibling12 -> sibling13 -> sibling14 -> null + | | | | + | | | null + | | | + null null child131 -> null + | + null Figure 1: Generic structure of un-flattened device tree @@ -101,10 +108,10 @@ Figure 1: Generic structure of un-flattened device tree Before executing OF unittest, it is required to attach the test data to machine's device tree (if present). So, when selftest_data_add() is called, at first it reads the flattened device tree data linked into the kernel image -via the following kernel symbols: +via the following kernel symbols:: -__dtb_testcases_begin - address marking the start of test data blob -__dtb_testcases_end - address marking the end of test data blob + __dtb_testcases_begin - address marking the start of test data blob + __dtb_testcases_end - address marking the end of test data blob Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened blob. And finally, if the machine's device tree (i.e live tree) is present, @@ -113,15 +120,15 @@ attaches itself as a live device tree. attach_node_and_children() uses of_attach_node() to attach the nodes into the live tree as explained below. To explain the same, the test data tree described - in Figure 2 is attached to the live tree described in Figure 1. +in Figure 2 is attached to the live tree described in Figure 1:: -root ('/') - | - testcase-data - | - test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null - | | | | - test-child01 null null null + root ('/') + | + testcase-data + | + test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null + | | | | + test-child01 null null null Figure 2: Example test data tree to be attached to live tree. @@ -134,39 +141,39 @@ In the function of_attach_node(), the new node is attached as the child of the given parent in live tree. But, if parent already has a child then the new node replaces the current child and turns it into its sibling. So, when the testcase data node is attached to the live tree above (Figure 1), the final structure is - as shown in Figure 3. +as shown in Figure 3:: -root ('/') - | -testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null - | | | | | - (...) | | | null - | | child31 -> sibling32 -> null - | | | | - | | null null - | | - | child21 -> sibling22 -> sibling23 -> null - | | | | - | null null null - | - child11 -> sibling12 -> sibling13 -> sibling14 -> null - | | | | - null null | null - | - child131 -> null - | - null ------------------------------------------------------------------------ + root ('/') + | + testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null + | | | | | + (...) | | | null + | | child31 -> sibling32 -> null + | | | | + | | null null + | | + | child21 -> sibling22 -> sibling23 -> null + | | | | + | null null null + | + child11 -> sibling12 -> sibling13 -> sibling14 -> null + | | | | + null null | null + | + child131 -> null + | + null + ----------------------------------------------------------------------- -root ('/') - | -testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null - | | | | | - | (...) (...) (...) null - | -test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null - | | | | - null null null test-child01 + root ('/') + | + testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null + | | | | | + | (...) (...) (...) null + | + test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null + | | | | + null null null test-child01 Figure 3: Live device tree structure after attaching the testcase-data. @@ -176,7 +183,7 @@ Astute readers would have noticed that test-child0 node becomes the last sibling compared to the earlier structure (Figure 2). After attaching first test-child0 the test-sibling1 is attached that pushes the child node (i.e. test-child0) to become a sibling and makes itself a child node, - as mentioned above. +as mentioned above. If a duplicate node is found (i.e. if a node with same full_name property is already present in the live tree), then the node isn't attached rather its @@ -185,6 +192,7 @@ update_node_properties(). 2.2. Removing the test data +--------------------------- Once the test case execution is complete, selftest_data_remove is called in order to remove the device nodes attached initially (first the leaf nodes are diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.rst similarity index 50% rename from Documentation/devicetree/overlay-notes.txt rename to Documentation/devicetree/overlay-notes.rst index 725fb8d255c1..c67cc676bbd2 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.rst @@ -1,9 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= Device Tree Overlay Notes -------------------------- +========================= This document describes the implementation of the in-kernel device tree overlay functionality residing in drivers/of/overlay.c and is a -companion document to Documentation/devicetree/dynamic-resolution-notes.txt[1] +companion document to Documentation/devicetree/dynamic-resolution-notes.rst[1] How overlays work ----------------- @@ -15,10 +18,11 @@ Since the kernel mainly deals with devices, any new device node that result in an active device should have it created while if the device node is either disabled or removed all together, the affected device should be deregistered. -Lets take an example where we have a foo board with the following base tree: +Lets take an example where we have a foo board with the following base tree:: ----- foo.dts ----------------------------------------------------------------- + ---- foo.dts --------------------------------------------------------------- /* FOO platform */ + /dts-v1/; / { compatible = "corp,foo"; @@ -30,32 +34,28 @@ Lets take an example where we have a foo board with the following base tree: ocp: ocp { /* peripherals that are always instantiated */ peripheral1 { ... }; - } - }; ----- foo.dts ----------------------------------------------------------------- - -The overlay bar.dts, when loaded (and resolved as described in [1]) should - ----- bar.dts ----------------------------------------------------------------- -/plugin/; /* allow undefined label references and record them */ -/ { - .... /* various properties for loader use; i.e. part id etc. */ - fragment@0 { - target = <&ocp>; - __overlay__ { - /* bar peripheral */ - bar { - compatible = "corp,bar"; - ... /* various properties and child nodes */ - } }; }; -}; ----- bar.dts ----------------------------------------------------------------- + ---- foo.dts --------------------------------------------------------------- -result in foo+bar.dts +The overlay bar.dts, +:: ----- foo+bar.dts ------------------------------------------------------------- + ---- bar.dts - overlay target location by label ---------------------------- + /dts-v1/; + /plugin/; + &ocp { + /* bar peripheral */ + bar { + compatible = "corp,bar"; + ... /* various properties and child nodes */ + }; + }; + ---- bar.dts --------------------------------------------------------------- + +when loaded (and resolved as described in [1]) should result in foo+bar.dts:: + + ---- foo+bar.dts ----------------------------------------------------------- /* FOO platform + bar peripheral */ / { compatible = "corp,foo"; @@ -73,26 +73,47 @@ result in foo+bar.dts bar { compatible = "corp,bar"; ... /* various properties and child nodes */ - } - } + }; + }; }; ----- foo+bar.dts ------------------------------------------------------------- + ---- foo+bar.dts ----------------------------------------------------------- As a result of the overlay, a new device node (bar) has been created so a bar platform device will be registered and if a matching device driver is loaded the device will be created as expected. +If the base DT was not compiled with the -@ option then the "&ocp" label +will not be available to resolve the overlay node(s) to the proper location +in the base DT. In this case, the target path can be provided. The target +location by label syntax is preferred because the overlay can be applied to +any base DT containing the label, no matter where the label occurs in the DT. + +The above bar.dts example modified to use target path syntax is:: + + ---- bar.dts - overlay target location by explicit path -------------------- + /dts-v1/; + /plugin/; + &{/ocp} { + /* bar peripheral */ + bar { + compatible = "corp,bar"; + ... /* various properties and child nodes */ + } + }; + ---- bar.dts --------------------------------------------------------------- + + Overlay in-kernel API -------------------------------- The API is quite easy to use. -1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The -return value is an error or a cookie identifying this overlay. +1) Call of_overlay_fdt_apply() to create and apply an overlay changeset. The + return value is an error or a cookie identifying this overlay. -2. Call of_overlay_remove() to remove and cleanup the overlay changeset -previously created via the call to of_overlay_fdt_apply(). Removal of an -overlay changeset that is stacked by another will not be permitted. +2) Call of_overlay_remove() to remove and cleanup the overlay changeset + previously created via the call to of_overlay_fdt_apply(). Removal of an + overlay changeset that is stacked by another will not be permitted. Finally, if you need to remove all overlays in one-go, just call of_overlay_remove_all() which will remove every single one in the correct @@ -105,35 +126,3 @@ enum of_overlay_notify_action for details. Note that a notifier callback is not supposed to store pointers to a device tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the respective node it received. - -Overlay DTS Format ------------------- - -The DTS of an overlay should have the following format: - -{ - /* ignored properties by the overlay */ - - fragment@0 { /* first child node */ - - target=; /* phandle target of the overlay */ - or - target-path="/path"; /* target path of the overlay */ - - __overlay__ { - property-a; /* add property-a to the target */ - node-a { /* add to an existing, or create a node-a */ - ... - }; - }; - } - fragment@1 { /* second child node */ - ... - }; - /* more fragments follow */ -} - -Using the non-phandle based target method allows one to use a base DT which does -not contain a __symbols__ node, i.e. it was not compiled with the -@ option. -The __symbols__ node is only required for the target= method, since it -contains the information required to map from a phandle to a tree location. diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.rst similarity index 97% rename from Documentation/devicetree/usage-model.txt rename to Documentation/devicetree/usage-model.rst index 33a8aaac02a8..e1b42dc63f01 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.rst @@ -1,14 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= Linux and the Device Tree -------------------------- +========================= + The Linux usage model for device tree data -Author: Grant Likely +:Author: Grant Likely This article describes how Linux uses the device tree. An overview of the device tree data format can be found on the device tree usage page -at devicetree.org[1]. +at devicetree.org\ [1]_. -[1] http://devicetree.org/Device_Tree_Usage +.. [1] https://elinux.org/Device_Tree_Usage The "Open Firmware Device Tree", or simply Device Tree (DT), is a data structure and language for describing hardware. More specifically, it @@ -57,7 +61,7 @@ Tree (FDT) was created which could be passed to the kernel as a binary blob without requiring a real Open Firmware implementation. U-Boot, kexec, and other bootloaders were modified to support both passing a Device Tree Binary (dtb) and to modify a dtb at boot time. DT was -also added to the PowerPC boot wrapper (arch/powerpc/boot/*) so that +also added to the PowerPC boot wrapper (``arch/powerpc/boot/*``) so that a dtb could be wrapped up with the kernel image to support booting existing non-DT aware firmware. @@ -68,7 +72,7 @@ out of mainline (nios) have some level of DT support. 2. Data Model ------------- -If you haven't already read the Device Tree Usage[1] page, +If you haven't already read the Device Tree Usage\ [1]_ page, then go read it now. It's okay, I'll wait.... 2.1 High Level View @@ -88,6 +92,7 @@ duplication and make it easier to support a wide range of hardware with a single kernel image. Linux uses DT data for three major purposes: + 1) platform identification, 2) runtime configuration, and 3) device population. @@ -117,7 +122,7 @@ The 'compatible' property contains a sorted list of strings starting with the exact name of the machine, followed by an optional list of boards it is compatible with sorted from most compatible to least. For example, the root compatible properties for the TI BeagleBoard and its -successor, the BeagleBoard xM board might look like, respectively: +successor, the BeagleBoard xM board might look like, respectively:: compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3"; compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3"; @@ -183,7 +188,7 @@ configuration data like the kernel parameters string and the location of an initrd image. Most of this data is contained in the /chosen node, and when booting -Linux it will look something like this: +Linux it will look something like this:: chosen { bootargs = "console=ttyS0,115200 loglevel=8"; @@ -251,9 +256,9 @@ platform devices roughly correspond to device nodes at the root of the tree and children of simple memory mapped bus nodes. About now is a good time to lay out an example. Here is part of the -device tree for the NVIDIA Tegra board. +device tree for the NVIDIA Tegra board:: -/{ + /{ compatible = "nvidia,harmony", "nvidia,tegra20"; #address-cells = <1>; #size-cells = <1>; @@ -313,7 +318,7 @@ device tree for the NVIDIA Tegra board. i2s-controller = <&i2s1>; i2s-codec = <&wm8903>; }; -}; + }; At .init_machine() time, Tegra board support code will need to look at this DT and decide which nodes to create platform_devices for. @@ -379,13 +384,13 @@ device tree support code reflects that and makes the above example simpler. The second argument to of_platform_populate() is an of_device_id table, and any node that matches an entry in that table will also get its child nodes registered. In the Tegra case, the code -can look something like this: +can look something like this:: -static void __init harmony_init_machine(void) -{ + static void __init harmony_init_machine(void) + { /* ... */ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} + } "simple-bus" is defined in the Devicetree Specification as a property meaning a simple memory mapped bus, so the of_platform_populate() code diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt new file mode 100644 index 000000000000..c527d05c0459 --- /dev/null +++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt @@ -0,0 +1,34 @@ +# +# Feature name: debug-vm-pgtable +# Kconfig: ARCH_HAS_DEBUG_VM_PGTABLE +# description: arch supports pgtable tests for semantics compliance +# + ----------------------- + | arch |status| + ----------------------- + | alpha: | TODO | + | arc: | ok | + | arm: | TODO | + | arm64: | ok | + | c6x: | TODO | + | csky: | TODO | + | h8300: | TODO | + | hexagon: | TODO | + | ia64: | TODO | + | m68k: | TODO | + | microblaze: | TODO | + | mips: | TODO | + | nds32: | TODO | + | nios2: | TODO | + | openrisc: | TODO | + | parisc: | TODO | + | powerpc: | ok | + | riscv: | TODO | + | s390: | ok | + | sh: | TODO | + | sparc: | TODO | + | um: | TODO | + | unicore32: | TODO | + | x86: | ok | + | xtensa: | TODO | + ----------------------- diff --git a/Documentation/index.rst b/Documentation/index.rst index af2b87afebc8..71eca3171574 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. The Linux Kernel documentation master file, created by sphinx-quickstart on Fri Feb 12 13:51:46 2016. @@ -46,6 +48,7 @@ platform firmwares. :maxdepth: 2 firmware-guide/index + devicetree/index Application-developer documentation ----------------------------------- diff --git a/Documentation/powerpc/bootwrapper.rst b/Documentation/powerpc/bootwrapper.rst index a6292afba573..cdfa2bc8425f 100644 --- a/Documentation/powerpc/bootwrapper.rst +++ b/Documentation/powerpc/bootwrapper.rst @@ -70,28 +70,6 @@ Currently, the following image format targets exist: kernel with this image type and it depends entirely on the embedded device tree for all information. - The simpleImage is useful for booting systems with - an unknown firmware interface or for booting from - a debugger when no firmware is present (such as on - the Xilinx Virtex platform). The only assumption that - simpleImage makes is that RAM is correctly initialized - and that the MMU is either off or has RAM mapped to - base address 0. - - simpleImage also supports inserting special platform - specific initialization code to the start of the bootup - sequence. The virtex405 platform uses this feature to - ensure that the cache is invalidated before caching - is enabled. Platform specific initialization code is - added as part of the wrapper script and is keyed on - the image target name. For example, all - simpleImage.virtex405-* targets will add the - virtex405-head.S initialization code (This also means - that the dts file for virtex405 targets should be - named (virtex405-.dts). Search the wrapper - script for 'virtex405' and see the file - arch/powerpc/boot/virtex405-head.S for details. - treeImage.%; Image format for used with OpenBIOS firmware found on some ppc4xx hardware. This image embeds a device tree blob inside the image. @@ -116,10 +94,8 @@ Image types which embed a device tree blob (simpleImage, dtbImage, treeImage, and cuImage) all generate the device tree blob from a file in the arch/powerpc/boot/dts/ directory. The Makefile selects the correct device tree source based on the name of the target. Therefore, if the kernel is -built with 'make treeImage.walnut simpleImage.virtex405-ml403', then the -build system will use arch/powerpc/boot/dts/walnut.dts to build -treeImage.walnut and arch/powerpc/boot/dts/virtex405-ml403.dts to build -the simpleImage.virtex405-ml403. +built with 'make treeImage.walnut', then the build system will use +arch/powerpc/boot/dts/walnut.dts to build treeImage.walnut. Two special targets called 'zImage' and 'zImage.initrd' also exist. These targets build all the default images as selected by the kernel configuration. diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst index 0d45f0fc8e57..afe2d5e54db6 100644 --- a/Documentation/powerpc/index.rst +++ b/Documentation/powerpc/index.rst @@ -30,6 +30,7 @@ powerpc syscall64-abi transactional_memory ultravisor + vas-api .. only:: subproject and html diff --git a/Documentation/powerpc/transactional_memory.rst b/Documentation/powerpc/transactional_memory.rst index 09955103acb4..b5b09bf00966 100644 --- a/Documentation/powerpc/transactional_memory.rst +++ b/Documentation/powerpc/transactional_memory.rst @@ -245,3 +245,30 @@ POWER9N DD2.2. Guest migration from POWER8 to POWER9 will work with POWER9N DD2.2 and POWER9C DD1.2. Since earlier POWER9 processors don't support TM emulation, migration from POWER8 to POWER9 is not supported there. + +Kernel implementation +===================== + +h/rfid mtmsrd quirk +------------------- + +As defined in the ISA, rfid has a quirk which is useful in early +exception handling. When in a userspace transaction and we enter the +kernel via some exception, MSR will end up as TM=0 and TS=01 (ie. TM +off but TM suspended). Regularly the kernel will want change bits in +the MSR and will perform an rfid to do this. In this case rfid can +have SRR0 TM = 0 and TS = 00 (ie. TM off and non transaction) and the +resulting MSR will retain TM = 0 and TS=01 from before (ie. stay in +suspend). This is a quirk in the architecture as this would normally +be a transition from TS=01 to TS=00 (ie. suspend -> non transactional) +which is an illegal transition. + +This quirk is described the architecture in the definition of rfid +with these lines: + + if (MSR 29:31 ¬ = 0b010 | SRR1 29:31 ¬ = 0b000) then + MSR 29:31 <- SRR1 29:31 + +hrfid and mtmsrd have the same quirk. + +The Linux kernel uses this quirk in it's early exception handling. diff --git a/Documentation/powerpc/vas-api.rst b/Documentation/powerpc/vas-api.rst new file mode 100644 index 000000000000..1217c2f1595e --- /dev/null +++ b/Documentation/powerpc/vas-api.rst @@ -0,0 +1,292 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _VAS-API: + +=================================================== +Virtual Accelerator Switchboard (VAS) userspace API +=================================================== + +Introduction +============ + +Power9 processor introduced Virtual Accelerator Switchboard (VAS) which +allows both userspace and kernel communicate to co-processor +(hardware accelerator) referred to as the Nest Accelerator (NX). The NX +unit comprises of one or more hardware engines or co-processor types +such as 842 compression, GZIP compression and encryption. On power9, +userspace applications will have access to only GZIP Compression engine +which supports ZLIB and GZIP compression algorithms in the hardware. + +To communicate with NX, kernel has to establish a channel or window and +then requests can be submitted directly without kernel involvement. +Requests to the GZIP engine must be formatted as a co-processor Request +Block (CRB) and these CRBs must be submitted to the NX using COPY/PASTE +instructions to paste the CRB to hardware address that is associated with +the engine's request queue. + +The GZIP engine provides two priority levels of requests: Normal and +High. Only Normal requests are supported from userspace right now. + +This document explains userspace API that is used to interact with +kernel to setup channel / window which can be used to send compression +requests directly to NX accelerator. + + +Overview +======== + +Application access to the GZIP engine is provided through +/dev/crypto/nx-gzip device node implemented by the VAS/NX device driver. +An application must open the /dev/crypto/nx-gzip device to obtain a file +descriptor (fd). Then should issue VAS_TX_WIN_OPEN ioctl with this fd to +establish connection to the engine. It means send window is opened on GZIP +engine for this process. Once a connection is established, the application +should use the mmap() system call to map the hardware address of engine's +request queue into the application's virtual address space. + +The application can then submit one or more requests to the the engine by +using copy/paste instructions and pasting the CRBs to the virtual address +(aka paste_address) returned by mmap(). User space can close the +established connection or send window by closing the file descriptior +(close(fd)) or upon the process exit. + +Note that applications can send several requests with the same window or +can establish multiple windows, but one window for each file descriptor. + +Following sections provide additional details and references about the +individual steps. + +NX-GZIP Device Node +=================== + +There is one /dev/crypto/nx-gzip node in the system and it provides +access to all GZIP engines in the system. The only valid operations on +/dev/crypto/nx-gzip are: + + * open() the device for read and write. + * issue VAS_TX_WIN_OPEN ioctl + * mmap() the engine's request queue into application's virtual + address space (i.e. get a paste_address for the co-processor + engine). + * close the device node. + +Other file operations on this device node are undefined. + +Note that the copy and paste operations go directly to the hardware and +do not go through this device. Refer COPY/PASTE document for more +details. + +Although a system may have several instances of the NX co-processor +engines (typically, one per P9 chip) there is just one +/dev/crypto/nx-gzip device node in the system. When the nx-gzip device +node is opened, Kernel opens send window on a suitable instance of NX +accelerator. It finds CPU on which the user process is executing and +determine the NX instance for the corresponding chip on which this CPU +belongs. + +Applications may chose a specific instance of the NX co-processor using +the vas_id field in the VAS_TX_WIN_OPEN ioctl as detailed below. + +A userspace library libnxz is available here but still in development: + https://github.com/abalib/power-gzip + +Applications that use inflate / deflate calls can link with libnxz +instead of libz and use NX GZIP compression without any modification. + +Open /dev/crypto/nx-gzip +======================== + +The nx-gzip device should be opened for read and write. No special +privileges are needed to open the device. Each window corresponds to one +file descriptor. So if the userspace process needs multiple windows, +several open calls have to be issued. + +See open(2) system call man pages for other details such as return values, +error codes and restrictions. + +VAS_TX_WIN_OPEN ioctl +===================== + +Applications should use the VAS_TX_WIN_OPEN ioctl as follows to establish +a connection with NX co-processor engine: + + :: + struct vas_tx_win_open_attr { + __u32 version; + __s16 vas_id; /* specific instance of vas or -1 + for default */ + __u16 reserved1; + __u64 flags; /* For future use */ + __u64 reserved2[6]; + }; + + version: The version field must be currently set to 1. + vas_id: If '-1' is passed, kernel will make a best-effort attempt + to assign an optimal instance of NX for the process. To + select the specific VAS instance, refer + "Discovery of available VAS engines" section below. + + flags, reserved1 and reserved2[6] fields are for future extension + and must be set to 0. + + The attributes attr for the VAS_TX_WIN_OPEN ioctl are defined as + follows: + #define VAS_MAGIC 'v' + #define VAS_TX_WIN_OPEN _IOW(VAS_MAGIC, 1, + struct vas_tx_win_open_attr) + + struct vas_tx_win_open_attr attr; + rc = ioctl(fd, VAS_TX_WIN_OPEN, &attr); + + The VAS_TX_WIN_OPEN ioctl returns 0 on success. On errors, it + returns -1 and sets the errno variable to indicate the error. + + Error conditions: + EINVAL fd does not refer to a valid VAS device. + EINVAL Invalid vas ID + EINVAL version is not set with proper value + EEXIST Window is already opened for the given fd + ENOMEM Memory is not available to allocate window + ENOSPC System has too many active windows (connections) + opened + EINVAL reserved fields are not set to 0. + + See the ioctl(2) man page for more details, error codes and + restrictions. + +mmap() NX-GZIP device +===================== + +The mmap() system call for a NX-GZIP device fd returns a paste_address +that the application can use to copy/paste its CRB to the hardware engines. + :: + + paste_addr = mmap(addr, size, prot, flags, fd, offset); + + Only restrictions on mmap for a NX-GZIP device fd are: + * size should be PAGE_SIZE + * offset parameter should be 0ULL + + Refer to mmap(2) man page for additional details/restrictions. + In addition to the error conditions listed on the mmap(2) man + page, can also fail with one of the following error codes: + + EINVAL fd is not associated with an open window + (i.e mmap() does not follow a successful call + to the VAS_TX_WIN_OPEN ioctl). + EINVAL offset field is not 0ULL. + +Discovery of available VAS engines +================================== + +Each available VAS instance in the system will have a device tree node +like /proc/device-tree/vas@* or /proc/device-tree/xscom@*/vas@*. +Determine the chip or VAS instance and use the corresponding ibm,vas-id +property value in this node to select specific VAS instance. + +Copy/Paste operations +===================== + +Applications should use the copy and paste instructions to send CRB to NX. +Refer section 4.4 in PowerISA for Copy/Paste instructions: +https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0 + +CRB Specification and use NX +============================ + +Applications should format requests to the co-processor using the +co-processor Request Block (CRBs). Refer NX-GZIP user's manual for the format +of CRB and use NX from userspace such as sending requests and checking +request status. + +NX Fault handling +================= + +Applications send requests to NX and wait for the status by polling on +co-processor Status Block (CSB) flags. NX updates status in CSB after each +request is processed. Refer NX-GZIP user's manual for the format of CSB and +status flags. + +In case if NX encounters translation error (called NX page fault) on CSB +address or any request buffer, raises an interrupt on the CPU to handle the +fault. Page fault can happen if an application passes invalid addresses or +request buffers are not in memory. The operating system handles the fault by +updating CSB with the following data: + + csb.flags = CSB_V; + csb.cc = CSB_CC_TRANSLATION; + csb.ce = CSB_CE_TERMINATION; + csb.address = fault_address; + +When an application receives translation error, it can touch or access +the page that has a fault address so that this page will be in memory. Then +the application can resend this request to NX. + +If the OS can not update CSB due to invalid CSB address, sends SEGV signal +to the process who opened the send window on which the original request was +issued. This signal returns with the following siginfo struct: + + siginfo.si_signo = SIGSEGV; + siginfo.si_errno = EFAULT; + siginfo.si_code = SEGV_MAPERR; + siginfo.si_addr = CSB adress; + +In the case of multi-thread applications, NX send windows can be shared +across all threads. For example, a child thread can open a send window, +but other threads can send requests to NX using this window. These +requests will be successful even in the case of OS handling faults as long +as CSB address is valid. If the NX request contains an invalid CSB address, +the signal will be sent to the child thread that opened the window. But if +the thread is exited without closing the window and the request is issued +using this window. the signal will be issued to the thread group leader +(tgid). It is up to the application whether to ignore or handle these +signals. + +NX-GZIP User's Manual: +https://github.com/libnxz/power-gzip/blob/master/power_nx_gzip_um.pdf + +Simple example +============== + + :: + int use_nx_gzip() + { + int rc, fd; + void *addr; + struct vas_setup_attr txattr; + + fd = open("/dev/crypto/nx-gzip", O_RDWR); + if (fd < 0) { + fprintf(stderr, "open nx-gzip failed\n"); + return -1; + } + memset(&txattr, 0, sizeof(txattr)); + txattr.version = 1; + txattr.vas_id = -1 + rc = ioctl(fd, VAS_TX_WIN_OPEN, + (unsigned long)&txattr); + if (rc < 0) { + fprintf(stderr, "ioctl() n %d, error %d\n", + rc, errno); + return rc; + } + addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, + MAP_SHARED, fd, 0ULL); + if (addr == MAP_FAILED) { + fprintf(stderr, "mmap() failed, errno %d\n", + errno); + return -errno; + } + do { + //Format CRB request with compression or + //uncompression + // Refer tests for vas_copy/vas_paste + vas_copy((&crb, 0, 1); + vas_paste(addr, 0, 1); + // Poll on csb.flags with timeout + // csb address is listed in CRB + } while (true) + close(fd) or window can be closed upon process exit + } + + Refer https://github.com/abalib/power-gzip for tests or more + use cases. diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index ba5e944c7a63..1699b7f8e63a 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -16,7 +16,7 @@ for a list of items to check before submitting code. If you are submitting a driver, also read :ref:`Documentation/process/submitting-drivers.rst `; for device tree binding patches, read -Documentation/devicetree/bindings/submitting-patches.txt. +Documentation/devicetree/bindings/submitting-patches.rst. Many of these steps describe the default behavior of the ``git`` version control system; if you use ``git`` to prepare your patches, you'll find much diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index 3b5614b1d1a5..430a16283103 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -1524,7 +1524,7 @@ display-graph option:: => remove_vma => exit_mmap => mmput - => flush_old_exec + => begin_new_exec => load_elf_binary => search_binary_handler => __do_execve_file.isra.32 diff --git a/Documentation/translations/it_IT/process/submitting-patches.rst b/Documentation/translations/it_IT/process/submitting-patches.rst index cba1f8cb61ed..7c23c08e4401 100644 --- a/Documentation/translations/it_IT/process/submitting-patches.rst +++ b/Documentation/translations/it_IT/process/submitting-patches.rst @@ -21,7 +21,7 @@ Leggete anche :ref:`Documentation/translations/it_IT/process/submit-checklist.rs per una lista di punti da verificare prima di inviare del codice. Se state inviando un driver, allora leggete anche :ref:`Documentation/translations/it_IT/process/submitting-drivers.rst `; per delle patch relative alle associazioni per Device Tree leggete -Documentation/devicetree/bindings/submitting-patches.txt. +Documentation/devicetree/bindings/submitting-patches.rst. Molti di questi passi descrivono il comportamento di base del sistema di controllo di versione ``git``; se utilizzate ``git`` per preparare le vostre diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 52bf58417653..1f3da8f32fc1 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -287,6 +287,7 @@ Code Seq# Include File Comments 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! 'v' 00-0F media/v4l2-subdev.h conflict! +'v' 20-27 arch/powerpc/include/uapi/asm/vas-api.h VAS API 'v' C0-FF linux/meye.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications diff --git a/MAINTAINERS b/MAINTAINERS index be22fca436a3..610d5ee81210 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1350,10 +1350,11 @@ F: arch/arm/mach-integrator/ F: arch/arm/mach-realview/ F: arch/arm/mach-versatile/ F: arch/arm/plat-versatile/ +F: drivers/bus/arm-integrator-lm.c F: drivers/clk/versatile/ F: drivers/i2c/busses/i2c-versatile.c F: drivers/irqchip/irq-versatile-fpga.c -F: drivers/mtd/maps/physmap_of_versatile.c +F: drivers/mtd/maps/physmap-versatile.* F: drivers/power/reset/arm-versatile-reboot.c F: drivers/soc/versatile/ @@ -1703,11 +1704,6 @@ S: Maintained T: git git://git.armlinux.org.uk/~rmk/linux-arm.git clkdev F: drivers/clk/clkdev.c -ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT -M: Mike Rapoport -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained - ARM/CONEXANT DIGICOLOR MACHINE SUPPORT M: Baruch Siach L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2016,6 +2012,7 @@ F: arch/arm/mach-dove/ F: arch/arm/mach-mv78xx0/ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ +F: drivers/soc/dove/ ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SOC support M: Jason Cooper @@ -2292,6 +2289,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-realtek-soc@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/arm/realtek.yaml +F: arch/arm/boot/dts/rtd* +F: arch/arm/mach-realtek/ F: arch/arm64/boot/dts/realtek/ ARM/RENESAS ARM64 ARCHITECTURE @@ -2714,8 +2713,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported W: http://wiki.xilinx.com T: git https://github.com/Xilinx/linux-xlnx.git -F: Documentation/devicetree/bindings/i2c/i2c-cadence.txt -F: Documentation/devicetree/bindings/i2c/i2c-xiic.txt +F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml +F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml F: arch/arm/mach-zynq/ F: drivers/block/xsysace.c F: drivers/clocksource/timer-cadence-ttc.c @@ -3340,7 +3339,7 @@ L: bcm-kernel-feedback-list@broadcom.com L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -T: git git://github.com/anholt/linux +T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml F: drivers/pci/controller/pcie-brcmstb.c F: drivers/staging/vc04_services @@ -4089,12 +4088,11 @@ M: Charles Keepax M: Richard Fitzgerald L: patches@opensource.cirrus.com S: Supported -F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt -F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt -F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt -F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt -F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt -F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt +F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml +F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml +F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml F: Documentation/hwmon/lochnagar.rst F: drivers/clk/clk-lochnagar.c F: drivers/hwmon/lochnagar-hwmon.c @@ -4114,9 +4112,9 @@ L: patches@opensource.cirrus.com S: Supported W: https://github.com/CirrusLogic/linux-drivers/wiki T: git https://github.com/CirrusLogic/linux-drivers.git -F: Documentation/devicetree/bindings/mfd/madera.txt -F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt -F: Documentation/devicetree/bindings/sound/madera.txt +F: Documentation/devicetree/bindings/mfd/cirrus,madera.yaml +F: Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +F: Documentation/devicetree/bindings/sound/cirrus,madera.yaml F: drivers/gpio/gpio-madera* F: drivers/irqchip/irq-madera* F: drivers/mfd/cs47l* @@ -9876,7 +9874,7 @@ F: arch/powerpc/platforms/83xx/ F: arch/powerpc/platforms/85xx/ LINUX FOR POWERPC EMBEDDED PPC8XX -M: Christophe Leroy +M: Christophe Leroy L: linuxppc-dev@lists.ozlabs.org S: Maintained F: arch/powerpc/platforms/8xx/ @@ -12660,8 +12658,8 @@ M: Pantelis Antoniou M: Frank Rowand L: devicetree@vger.kernel.org S: Maintained -F: Documentation/devicetree/dynamic-resolution-notes.txt -F: Documentation/devicetree/overlay-notes.txt +F: Documentation/devicetree/dynamic-resolution-notes.rst +F: Documentation/devicetree/overlay-notes.rst F: drivers/of/overlay.c F: drivers/of/resolver.c K: of_overlay_notifier_ @@ -16736,6 +16734,16 @@ M: Laxman Dewangan S: Supported F: drivers/spi/spi-tegra* +TEGRA VIDEO DRIVER +M: Thierry Reding +M: Jonathan Hunter +M: Sowjanya Komatineni +L: linux-media@vger.kernel.org +L: linux-tegra@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +F: drivers/staging/media/tegra-video/ + TEGRA XUSB PADCTL DRIVER M: JC Kuo S: Supported @@ -18407,11 +18415,11 @@ L: patches@opensource.cirrus.com S: Supported W: https://github.com/CirrusLogic/linux-drivers/wiki T: git https://github.com/CirrusLogic/linux-drivers.git -F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt -F: Documentation/devicetree/bindings/mfd/arizona.txt +F: Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +F: Documentation/devicetree/bindings/mfd/wlf,arizona.yaml F: Documentation/devicetree/bindings/mfd/wm831x.txt -F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt -F: Documentation/devicetree/bindings/sound/wlf,arizona.txt +F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml F: Documentation/hwmon/wm83??.rst F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c index a8d0d6e06526..e4be7a543ecf 100644 --- a/arch/alpha/kernel/binfmt_loader.c +++ b/arch/alpha/kernel/binfmt_loader.c @@ -19,10 +19,6 @@ static int load_binary(struct linux_binprm *bprm) if (bprm->loader) return -ENOEXEC; - allow_write_access(bprm->file); - fput(bprm->file); - bprm->file = NULL; - loader = bprm->vma->vm_end - sizeof(void *); file = open_exec("/sbin/loader"); @@ -33,12 +29,9 @@ static int load_binary(struct linux_binprm *bprm) /* Remember if the application is TASO. */ bprm->taso = eh->ah.entry < 0x100000000UL; - bprm->file = file; + bprm->interpreter = file; bprm->loader = loader; - retval = prepare_binprm(bprm); - if (retval < 0) - return retval; - return search_binary_handler(bprm); + return 0; } static struct linux_binfmt loader_format = { diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index ff306246d0f8..471ef22216c4 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -6,6 +6,7 @@ config ARC def_bool y select ARC_TIMERS + select ARCH_HAS_DEBUG_VM_PGTABLE select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SETUP_DMA_OPS diff --git a/arch/arc/include/asm/highmem.h b/arch/arc/include/asm/highmem.h index 1af00accb37f..6e5eafb3afdd 100644 --- a/arch/arc/include/asm/highmem.h +++ b/arch/arc/include/asm/highmem.h @@ -25,17 +25,8 @@ #define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) #define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT) -#define kmap_prot PAGE_KERNEL - - #include -extern void *kmap(struct page *page); -extern void *kmap_high(struct page *page); -extern void *kmap_atomic(struct page *page); -extern void __kunmap_atomic(void *kvaddr); -extern void kunmap_high(struct page *page); - extern void kmap_init(void); static inline void flush_cache_kmaps(void) @@ -43,15 +34,6 @@ static inline void flush_cache_kmaps(void) flush_cache_all(); } -static inline void kunmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} - - #endif #endif diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c index fc8849e4f72e..479b0d72d3cf 100644 --- a/arch/arc/mm/highmem.c +++ b/arch/arc/mm/highmem.c @@ -49,38 +49,23 @@ extern pte_t * pkmap_page_table; static pte_t * fixmap_page_table; -void *kmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return page_address(page); - - return kmap_high(page); -} -EXPORT_SYMBOL(kmap); - -void *kmap_atomic(struct page *page) +void *kmap_atomic_high_prot(struct page *page, pgprot_t prot) { int idx, cpu_idx; unsigned long vaddr; - preempt_disable(); - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - cpu_idx = kmap_atomic_idx_push(); idx = cpu_idx + KM_TYPE_NR * smp_processor_id(); vaddr = FIXMAP_ADDR(idx); set_pte_at(&init_mm, vaddr, fixmap_page_table + idx, - mk_pte(page, kmap_prot)); + mk_pte(page, prot)); return (void *)vaddr; } -EXPORT_SYMBOL(kmap_atomic); +EXPORT_SYMBOL(kmap_atomic_high_prot); -void __kunmap_atomic(void *kv) +void kunmap_atomic_high(void *kv) { unsigned long kvaddr = (unsigned long)kv; @@ -102,11 +87,8 @@ void __kunmap_atomic(void *kv) kmap_atomic_idx_pop(); } - - pagefault_enable(); - preempt_enable(); } -EXPORT_SYMBOL(__kunmap_atomic); +EXPORT_SYMBOL(kunmap_atomic_high); static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr) { diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 16fbf74030fe..fb6c85c5d344 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -702,6 +702,8 @@ source "arch/arm/mach-qcom/Kconfig" source "arch/arm/mach-rda/Kconfig" +source "arch/arm/mach-realtek/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" @@ -739,7 +741,6 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" -source "arch/arm/plat-versatile/Kconfig" source "arch/arm/mach-vt8500/Kconfig" @@ -1249,7 +1250,6 @@ config HAVE_ARM_ARCH_TIMER bool "Architected timer support" depends on CPU_V7 select ARM_ARCH_TIMER - select GENERIC_CLOCKEVENTS help This option enables support for the ARM architected timer diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f46e18a77645..26a158e35e2c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -976,6 +976,13 @@ choice Say Y here if you want kernel low-level debugging support via SCIF4 on Renesas RZ/G1E (R8A7745). + config DEBUG_RCAR_GEN2_SCIFA2 + bool "Kernel low-level debugging messages via SCIFA2 on R8A7742" + depends on ARCH_R8A7742 + help + Say Y here if you want kernel low-level debugging support + via SCIFA2 on Renesas RZ/G1H (R8A7742). + config DEBUG_RMOBILE_SCIFA0 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" depends on ARCH_R8A73A4 @@ -1577,6 +1584,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 @@ -1696,6 +1704,7 @@ config DEBUG_UART_PHYS default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 + default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2 default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 @@ -1737,6 +1746,7 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ + DEBUG_RCAR_GEN2_SCIFA2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7d5cd0f85461..0fb6de83dd50 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -148,6 +148,8 @@ head-y := arch/arm/kernel/head$(MMUEXT).o textofs-y := 0x00008000 # We don't want the htc bootloader to corrupt kernel during resume textofs-$(CONFIG_PM_H1940) := 0x00108000 +# RTD1195 has Boot ROM at start of address space +textofs-$(CONFIG_ARCH_REALTEK) := 0x00108000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 @@ -208,6 +210,7 @@ machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_RDA) += rda +machine-$(CONFIG_ARCH_REALTEK) += realtek machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..e6a1cac0bfc7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d27_wlsom1_ek.dtb \ + at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ @@ -181,6 +182,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \ exynos3250-monk.dtb \ exynos3250-rinato.dtb dtb-$(CONFIG_ARCH_EXYNOS4) += \ + exynos4210-i9100.dtb \ exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ @@ -237,6 +239,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \ hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ + integratorap-im-pd1.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_IXP4XX) += \ intel-ixp42x-linksys-nslu2.dtb \ @@ -279,6 +282,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-iomega_ix2_200.dtb \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ + kirkwood-l-50.dtb \ kirkwood-laplug.dtb \ kirkwood-linkstation-lsqvl.dtb \ kirkwood-linkstation-lsvl.dtb \ @@ -412,6 +416,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ imx6dl-colibri-eval-v3.dtb \ + imx6dl-colibri-v1_1-eval-v3.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ @@ -832,6 +837,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ @@ -896,6 +902,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ dtb-$(CONFIG_ARCH_RDA) += \ rda8810pl-orangepi-2g-iot.dtb \ rda8810pl-orangepi-i96.dtb +dtb-$(CONFIG_ARCH_REALTEK) += \ + rtd1195-horseradish.dtb \ + rtd1195-mele-x1000.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ arm-realview-pb11mp.dtb \ @@ -917,6 +926,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r7s9210-rza2mevb.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7742-iwg21d-q7.dtb \ r8a7743-iwg20d-q7.dtb \ r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ @@ -1029,11 +1039,15 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32mp157a-avenger96.dtb \ + stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157a-iot-box.dtb \ + stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ - stm32mp157c-ev1.dtb + stm32mp157c-ev1.dtb \ + stm32mp157c-lxa-mc1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -1110,6 +1124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som204-evb.dtb \ sun7i-a20-olimex-som204-evb-emmc.dtb \ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime-emmc.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ @@ -1339,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ aspeed-bmc-facebook-yamp.dtb \ + aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ @@ -1347,6 +1363,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 5ed7f3c58c0f..7ff11d6bf0f2 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -330,9 +330,8 @@ }; }; - target-module@31000 { /* 0x44e31000, ap 25 40.0 */ + timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x31000 0x4>, <0x31010 0x4>, <0x31014 0x4>; @@ -1117,9 +1116,8 @@ }; }; - target-module@40000 { /* 0x48040000, ap 22 1e.0 */ + timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x40000 0x4>, <0x40010 0x4>, <0x40014 0x4>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index a35f5052d76f..3b177c9c4412 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -619,3 +619,23 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index e0b5a00e2078..dc8927f14b6c 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -169,5 +169,25 @@ status = "disabled"; }; -/include/ "am35xx-clocks.dtsi" -/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" +#include "am35xx-clocks.dtsi" +#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index dba87bfaf33e..b4861f70f178 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -553,3 +553,23 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 49c6a872052e..0d0f9fe4a882 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -328,9 +328,8 @@ }; }; - target-module@31000 { /* 0x44e31000, ap 24 40.0 */ + timer1_target: target-module@31000 { /* 0x44e31000, ap 24 40.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x31000 0x4>, <0x31010 0x4>, <0x31014 0x4>; @@ -450,7 +449,6 @@ target-module@86000 { /* 0x44e86000, ap 40 70.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x86000 0x4>, <0x86004 0x4>; reg-names = "rev", "sysc"; @@ -868,9 +866,8 @@ }; }; - target-module@40000 { /* 0x48040000, ap 18 1e.0 */ + timer2_target: target-module@40000 { /* 0x48040000, ap 18 1e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x40000 0x4>, <0x40010 0x4>, <0x40014 0x4>; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index c13756fa0f55..99a408a2ec6a 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -10,6 +10,7 @@ #include "dra7-mmc-iodelay.dtsi" #include "dra72x-mmc-iodelay.dtsi" #include "am57xx-idk-common.dtsi" +#include "dra7-ipu-dsp-common.dtsi" / { model = "TI AM5718 IDK"; @@ -20,6 +21,33 @@ reg = <0x0 0x80000000 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + leds { compatible = "gpio-leds"; cpu0-led { @@ -148,21 +176,19 @@ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; }; -&mailbox5 { +&ipu2 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; + memory-region = <&ipu2_memory_region>; }; -&mailbox6 { +&ipu1 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; }; &pcie1_rc { diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts new file mode 100644 index 000000000000..9877d7709d41 --- /dev/null +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -0,0 +1,731 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "dra74x.dtsi" +#include "am57xx-commercial-grade.dtsi" +#include "dra74x-mmc-iodelay.dtsi" +#include +#include +#include + +/ { + model = "BeagleBoard.org BeagleBone AI"; + compatible = "beagle,am5729-beagleboneai", "ti,am5728", + "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + rtc0 = &tps659038_rtc; + rtc1 = &rtc; + display0 = &hdmi_conn; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + + }; + + vdd_adc: gpioregulator-vdd_adc { + compatible = "regulator-gpio"; + regulator-name = "vdd_adc"; + vin-supply = <&vdd_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + states = <1800000 0 + 3300000 1>; + }; + + vdd_5v: fixedregulator-vdd_5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vtt_fixed: fixedregulator-vtt { + /* TPS51200 */ + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + vin-supply = <&vdd_ddr>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "beaglebone:green:usr0"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + label = "beaglebone:green:usr1"; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "beaglebone:green:usr2"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr3"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr4"; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "netdev"; + default-state = "off"; + }; + }; + + hdmi_conn: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_encoder_out>; + }; + }; + }; + + hdmi_enc: encoder@0 { + /* "ti,tpd12s016" software compatible with "ti,tpd12s015" + * no need for individual driver + */ + compatible = "ti,tpd12s015"; + gpios = <0>, + <0>, + <&gpio7 12 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <0x1>; + #size-cells = <0x0>; + + port@0 { + reg = <0x0>; + + hdmi_encoder_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <0x1>; + + hdmi_encoder_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + emmc_pwrseq: emmc_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + }; + + brcmf_pwrseq: brcmf_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */ + <&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */ + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + ti,enable-id-detection; + id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + ti,palmas-override-powerhold; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + smps12-in-supply = <&vdd_5v>; + smps3-in-supply = <&vdd_5v>; + smps45-in-supply = <&vdd_5v>; + smps6-in-supply = <&vdd_5v>; + smps7-in-supply = <&vdd_5v>; + mps3-in-supply = <&vdd_5v>; + smps8-in-supply = <&vdd_5v>; + smps9-in-supply = <&vdd_5v>; + ldo1-in-supply = <&vdd_5v>; + ldo2-in-supply = <&vdd_5v>; + ldo3-in-supply = <&vdd_5v>; + ldo4-in-supply = <&vdd_5v>; + ldo9-in-supply = <&vdd_5v>; + ldoln-in-supply = <&vdd_5v>; + ldousb-in-supply = <&vdd_5v>; + ldortc-in-supply = <&vdd_5v>; + + regulators { + vdd_mpu: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_ddr: smps3 { + /* VDD_DDR EMIF1 EMIF2 */ + regulator-name = "smps3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_dspeve: smps45 { + /* VDD_DSPEVE on AM572 */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_gpu: smps6 { + /* VDD_GPU */ + regulator-name = "smps6"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_core: smps7 { + /* VDD_CORE */ + regulator-name = "smps7"; + regulator-min-microvolt = < 850000>; /*** 1.15V */ + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_iva: smps8 { + /* VDD_IVAHD */ /*** 1.06V */ + regulator-name = "smps8"; + }; + + vdd_3v3: smps9 { + /* VDD_3V3 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_sd: ldo1 { + /* VDDSHV8 - VSDMMC */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: ldo2 { + /* VDDSH18V */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_phy_ldo3: ldo3 { + /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_phy_ldo4: ldo4 { + /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* LDO5-8 unused */ + + vdd_rtc: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = < 840000>; + regulator-max-microvolt = <1160000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_pll: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldortc_reg: ldortc { + /* VDDA_RTC */ + regulator-name = "ldortc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + regen1: regen1 { + /* VDD_3V3_ON */ + regulator-name = "regen1"; + regulator-boot-on; + regulator-always-on; + }; + + regen2: regen2 { + /* Needed for PMIC internal resource */ + regulator-name = "regen2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659038_rtc: tps659038_rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&tps659038>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio2>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */ + adc0: iio-device@0 { + #io-channel-cells = <1>; + iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>; + iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38", + "AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35"; + }; + }; + + stmpe_touchscreen { + status = "disabled"; + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + + stmpe_gpio { + compatible = "st,stmpe-gpio"; + }; + + stmpe_pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; +}; + +&mcspi3 { + status = "okay"; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + +&cpu0 { + vdd-supply = <&vdd_mpu>; + voltage-tolerance = <1>; +}; + +&uart1 { + status = "okay"; +}; + +&davinci_mdio { + reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + reg = <4>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +&mac { + slaves = <1>; + status = "okay"; +}; + +&cpsw_emac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii"; +}; + +&ocp { + pruss1_shmem: pruss_shmem@4b200000 { + status = "okay"; + compatible = "ti,pruss-shmem"; + reg = <0x4b200000 0x020000>; + }; + + pruss2_shmem: pruss_shmem@4b280000 { + status = "okay"; + compatible = "ti,pruss-shmem"; + reg = <0x4b280000 0x020000>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vdd_sd>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vdd_1v8>; + vqmmc-supply = <&vdd_1v8>; + bus-width = <8>; + ti,non-removable; + non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + + ti,needs-special-reset; + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; + dma-names = "tx", "rx"; + +}; + +&mmc4 { + /* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */ + /* HS: High speed up to 50 MHz (3.3 V signaling). */ + /* SDR12: SDR up to 25 MHz (1.8 V signaling). */ + /* SDR25: SDR up to 50 MHz (1.8 V signaling). */ + /* SDR50: SDR up to 100 MHz (1.8 V signaling). */ + /* SDR104: SDR up to 208 MHz (1.8 V signaling) */ + /* DDR50: DDR up to 50 MHz (1.8 V signaling). */ + status = "okay"; + + ti,needs-special-reset; + vmmc-supply = <&vdd_3v3>; + cap-power-off-card; + keep-power-in-suspend; + bus-width = <4>; + ti,non-removable; + non-removable; + no-1-8-v; + max-frequency = <24000000>; + + #address-cells = <1>; + #size-cells = <0>; + mmc-pwrseq = <&brcmf_pwrseq>; + + brcmf: wifi@1 { + status = "okay"; + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + brcm,sd-head-align = <4>; + brcm,sd_head_align = <4>; + brcm,sd_sgentry_align = <512>; + + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + status = "okay"; + dr_mode = "otg"; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&usb2 { + status = "okay"; + dr_mode = "host"; +}; + +&dss { + status = "okay"; + vdda_video-supply = <&vdd_1v8_pll>; +}; + +&hdmi { + status = "okay"; + vdda-supply = <&vdd_1v8_phy_ldo4>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_encoder_in>; + }; + }; +}; + +&bandgap { + status = "okay"; +}; + +&mailbox1 { + status = "okay"; +}; + +&mailbox2 { + status = "okay"; +}; + +&mailbox3 { + status = "okay"; +}; + +&mailbox4 { + status = "okay"; +}; + +&mailbox5 { + status = "okay"; +}; + +&mailbox6 { + status = "okay"; +}; + +&mailbox7 { + status = "okay"; +}; + +&mailbox8 { + status = "okay"; +}; + +&mailbox9 { + status = "okay"; +}; + +&mailbox10 { + status = "okay"; +}; + +&mailbox11 { + status = "okay"; +}; + +&mailbox12 { + status = "okay"; +}; + +&mailbox13 { + status = "okay"; +}; + +&cpu_alert0 { + temperature = <55000>; /* milliCelsius */ +}; + +&cpu_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&gpu_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&core_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&dspeve_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&iva_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&sata { + status = "disabled"; +}; + +&sata_phy { + status = "disabled"; +}; + +/* bluetooth */ +&uart6 { + status = "okay"; +}; + +/* cape header stuff */ +&i2c4 { + status = "okay"; + clock-frequency = <100000>; +}; + +&cpu0_opp_table { + opp_slow-500000000 { + opp-shared; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index ddf123620e96..37ce2d7c4173 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -6,6 +6,7 @@ #include #include #include "am57xx-idk-common.dtsi" +#include "dra74-ipu-dsp-common.dtsi" / { memory@0 { @@ -13,6 +14,40 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + status-leds { compatible = "gpio-leds"; cpu0-led { @@ -147,22 +182,22 @@ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; -&mailbox5 { +&ipu2 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; + memory-region = <&ipu2_memory_region>; }; -&mailbox6 { +&ipu1 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 565675354de4..94135fc5dd44 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -7,6 +7,7 @@ #include "am5728.dtsi" #include "am57xx-commercial-grade.dtsi" #include "dra74x-mmc-iodelay.dtsi" +#include "dra74-ipu-dsp-common.dtsi" #include #include @@ -50,6 +51,40 @@ regulator-boot-on; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + vdd_3v3: fixedregulator-vdd_3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; @@ -584,22 +619,22 @@ rx-num-evt = <32>; }; -&mailbox5 { +&ipu2 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; + memory-region = <&ipu2_memory_region>; }; -&mailbox6 { +&ipu1 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index a3ff1237d1fa..2c0aab352b44 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -35,6 +35,16 @@ regulator-boot-on; }; + v1_2d: fixedregulator-v1_2d { + compatible = "regulator-fixed"; + regulator-name = "V1_2D"; + vin-supply = <&vmain>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + vtt_fixed: fixedregulator-vtt { /* TPS51200 */ compatible = "regulator-fixed"; @@ -139,6 +149,12 @@ }; }; }; + + src_clk_x1: src_clk_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; }; &dra7_pmx_core { @@ -378,6 +394,32 @@ gpio-controller; #gpio-cells = <2>; }; + + dsi_bridge: tc358778@e { + compatible = "toshiba,tc358778", "toshiba,tc358768"; + reg = <0xe>; + status = "disabled"; + + clocks = <&src_clk_x1>; + clock-names = "refclk"; + + vddc-supply = <&v1_2d>; + vddmipi-supply = <&v1_2d>; + vddio-supply = <&v3_3d>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + rgb_in: endpoint { + remote-endpoint = <&dpi_out>; + data-lines = <24>; + }; + }; + }; + }; }; &mcspi3 { @@ -543,4 +585,20 @@ &dss { status = "okay"; + + vdda_video-supply = <&ldoln_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + remote-endpoint = <&rgb_in>; + data-lines = <24>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index c15f5e92f97f..0b8c2a64b36f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -114,7 +114,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <31>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -124,7 +123,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <32>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 2932a29ae272..9805e507c695 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -236,7 +236,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -247,7 +246,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index e038abc0c6b4..348116501aa2 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -153,7 +153,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -164,7 +163,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index b1b86934c688..e0b7c2099831 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -108,7 +108,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -119,7 +118,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -130,7 +128,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -141,7 +138,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = ; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 4afa8662c4e8..8d0f4656aa05 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -213,3 +213,7 @@ &i2c15 { status = "okay"; }; + +&fsim0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 5d7cbd9164d4..2d44d9ad4e40 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -5,6 +5,7 @@ #include "aspeed-g5.dtsi" #include +#include / { model = "Facebook TiogaPass BMC"; @@ -112,13 +113,76 @@ &kcs2 { // BMC KCS channel 2 status = "okay"; - kcs_addr = <0xca8>; + aspeed,lpc-io-reg = <0xca8>; }; &kcs3 { // BMC KCS channel 3 status = "okay"; - kcs_addr = <0xca2>; + aspeed,lpc-io-reg = <0xca2>; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "BMC_CPLD_FPGA_SEL","","","","","","","", + /*B0-B7*/ "","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK", + "IRQ_PVDDQ_GHJ_VRHOT_LVT3", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","", + "BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2", + "CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC", + /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON", + "POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC", + "CPU1_PROCHOT_LVT3_ BMC", + /*F0-F7*/ "IRQ_PVDDQ_ABC_VRHOT_LVT3","", + "IRQ_PVCCIN_CPU0_VRHOT_LVC3", + "IRQ_PVCCIN_CPU1_VRHOT_LVC3", + "IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","", + /*G0-G7*/ "CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP", + "CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE", + /*H0-H7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2", + "LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5", + "LED_POST_CODE_6","LED_POST_CODE_7", + /*I0-I7*/ "CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3", + "FORCE_ADR","UV_ADR_TRIGGER_EN","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","", + "MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","", + /*M0-M7*/ "CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN", + "CPU0_THERMTRIP_LATCH_LVT3", + "CPU1_THERMTRIP_LATCH_LVT3","","", + /*N0-N7*/ "","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2", + "BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ", + "BMC_PWR_DEBUG","RST_RSMRST", + /*Q0-Q7*/ "","","","","UARTSW_LSB","UARTSW_MSB", + "POST_CARD_PRES_BMC","PE_BMC_WAKE", + /*R0-R7*/ "","","BMC_TCK_MUX_SEL","BMC_PRDY", + "BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0", + "SLT_CFG1", + /*S0-S7*/ "THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","", + "","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","BMC_FAULT","","", + /*V0-V7*/ "","","","FAST_PROCHOT_EN","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","GLOBAL_RST_WARN", + "CPU0_MEMABC_MEMHOT_LVT3_BMC", + "CPU0_MEMDEF_MEMHOT_LVT3_BMC", + "CPU1_MEMGHJ_MEMHOT_LVT3_BMC", + "CPU1_MEMKLM_MEMHOT_LVT3_BMC", + /*Y0-Y7*/ "SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","", + "","","", + /*Z0-Z7*/ "","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","", + "","","","", + /*AA0-AA7*/ "CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT", + "SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET", + "","POST_COMPLETE", + /*AB0-AB7*/ "IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; }; &mac0 { @@ -368,6 +432,11 @@ &i2c4 { status = "okay"; // BMC Debug Header + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &i2c5 { @@ -449,6 +518,11 @@ &i2c9 { status = "okay"; //USB Debug Connector + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &pwm_tacho { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts new file mode 100644 index 000000000000..8864e9c312a8 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; +#include "aspeed-g5.dtsi" +#include + +/ { + model = "Facebook Yosemitev2 BMC"; + compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500"; + aliases { + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + iio-hwmon { + // VOLATAGE SENSOR + compatible = "iio-hwmon"; + io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> , + <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> , + <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> , + <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; +&uart1 { + // Host1 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + // Host2 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; + +}; + +&uart3 { + // Host3 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + // Host4 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&vuart { + // Virtual UART + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; + mlx,multi-host; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&i2c1 { + //Host1 IPMB bus + status = "okay"; + multi-master; + ipmb1@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c3 { + //Host2 IPMB bus + status = "okay"; + multi-master; + ipmb3@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c5 { + //Host3 IPMB bus + status = "okay"; + multi-master; + ipmb5@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c7 { + //Host4 IPMB bus + status = "okay"; + multi-master; + ipmb7@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c8 { + status = "okay"; + //FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c9 { + status = "okay"; + tmp421@4e { + //INLET TEMP + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + //OUTLET TEMP + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c10 { + status = "okay"; + //HSC + adm1278@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c11 { + status = "okay"; + //MEZZ_TEMP_SENSOR + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; +}; + +&i2c12 { + status = "okay"; + //MEZZ_FRU + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&pwm_tacho { + status = "okay"; + //FSC + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 6232cd726a7f..bdfe342bf7c5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -4,6 +4,7 @@ #include "aspeed-g6.dtsi" #include +#include / { model = "Rainier"; @@ -32,6 +33,11 @@ no-map; reg = <0xB8000000 0x04000000>; /* 64M */ }; + + vga_memory: region@bf000000 { + no-map; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; }; gpio-keys { @@ -64,6 +70,40 @@ }; +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", + "","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &emmc_controller { status = "okay"; }; @@ -72,6 +112,88 @@ status = "okay"; }; +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + &ibt { status = "okay"; }; @@ -269,66 +391,82 @@ gpio@0 { reg = <0>; + type = ; }; gpio@1 { reg = <1>; + type = ; }; gpio@2 { reg = <2>; + type = ; }; gpio@3 { reg = <3>; + type = ; }; gpio@4 { reg = <4>; + type = ; }; gpio@5 { reg = <5>; + type = ; }; gpio@6 { reg = <6>; + type = ; }; gpio@7 { reg = <7>; + type = ; }; gpio@8 { reg = <8>; + type = ; }; gpio@9 { reg = <9>; + type = ; }; gpio@10 { reg = <10>; + type = ; }; gpio@11 { reg = <11>; + type = ; }; gpio@12 { reg = <12>; + type = ; }; gpio@13 { reg = <13>; + type = ; }; gpio@14 { reg = <14>; + type = ; }; gpio@15 { reg = <15>; + type = ; }; }; @@ -386,21 +524,6 @@ &i2c9 { status = "okay"; - ir35221@42 { - compatible = "infineon,ir35221"; - reg = <0x42>; - }; - - ir35221@43 { - compatible = "infineon,ir35221"; - reg = <0x43>; - }; - - ir35221@44 { - compatible = "infineon,ir35221"; - reg = <0x44>; - }; - tmp423a@4c { compatible = "ti,tmp423"; reg = <0x4c>; @@ -411,21 +534,6 @@ reg = <0x4d>; }; - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - - ir35221@73 { - compatible = "infineon,ir35221"; - reg = <0x73>; - }; - - ir35221@74 { - compatible = "infineon,ir35221"; - reg = <0x74>; - }; - eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; @@ -435,21 +543,6 @@ &i2c10 { status = "okay"; - ir35221@42 { - compatible = "infineon,ir35221"; - reg = <0x42>; - }; - - ir35221@43 { - compatible = "infineon,ir35221"; - reg = <0x43>; - }; - - ir35221@44 { - compatible = "infineon,ir35221"; - reg = <0x44>; - }; - tmp423a@4c { compatible = "ti,tmp423"; reg = <0x4c>; @@ -460,21 +553,6 @@ reg = <0x4d>; }; - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - - ir35221@73 { - compatible = "infineon,ir35221"; - reg = <0x73>; - }; - - ir35221@74 { - compatible = "infineon,ir35221"; - reg = <0x74>; - }; - eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; @@ -540,6 +618,10 @@ status = "okay"; }; +&vuart2 { + status = "okay"; +}; + &lpc_ctrl { status = "okay"; memory-region = <&flash_memory>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index f7e935ede919..60e545b6396f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -8,6 +8,52 @@ model = "Mihawk BMC"; compatible = "ibm,mihawk-bmc", "aspeed,ast2500"; + aliases { + i2c215 = &bus6_mux215; + i2c216 = &bus6_mux216; + i2c217 = &bus6_mux217; + i2c218 = &bus6_mux218; + i2c219 = &bus6_mux219; + i2c220 = &bus6_mux220; + i2c221 = &bus6_mux221; + i2c222 = &bus6_mux222; + i2c223 = &bus7_mux223; + i2c224 = &bus7_mux224; + i2c225 = &bus7_mux225; + i2c226 = &bus7_mux226; + i2c227 = &bus7_mux227; + i2c228 = &bus7_mux228; + i2c229 = &bus7_mux229; + i2c230 = &bus7_mux230; + i2c231 = &bus9_mux231; + i2c232 = &bus9_mux232; + i2c233 = &bus9_mux233; + i2c234 = &bus9_mux234; + i2c235 = &bus9_mux235; + i2c236 = &bus9_mux236; + i2c237 = &bus9_mux237; + i2c238 = &bus9_mux238; + i2c239 = &bus10_mux239; + i2c240 = &bus10_mux240; + i2c241 = &bus10_mux241; + i2c242 = &bus10_mux242; + i2c243 = &bus10_mux243; + i2c244 = &bus10_mux244; + i2c245 = &bus10_mux245; + i2c246 = &bus10_mux246; + i2c247 = &bus12_mux247; + i2c248 = &bus12_mux248; + i2c249 = &bus12_mux249; + i2c250 = &bus12_mux250; + i2c251 = &bus13_mux251; + i2c252 = &bus13_mux252; + i2c253 = &bus13_mux253; + i2c254 = &bus13_mux254; + i2c255 = &bus13_mux255; + i2c256 = &bus13_mux256; + i2c257 = &bus13_mux257; + i2c258 = &bus13_mux258; + }; chosen { stdout-path = &uart5; @@ -120,35 +166,24 @@ leds { compatible = "gpio-leds"; - fault { + front-fault { retain-state-shutdown; default-state = "keep"; gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; }; - power { + power-button { retain-state-shutdown; default-state = "keep"; gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; }; - rear-id { + front-id { retain-state-shutdown; default-state = "keep"; gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; }; - rear-g { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>; - }; - - rear-ok { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>; - }; fan0 { retain-state-shutdown; @@ -630,6 +665,54 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + + bus7_mux223: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus7_mux224: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus7_mux225: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus7_mux226: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + bus7_mux227: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + bus7_mux228: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + bus7_mux229: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + bus7_mux230: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; @@ -644,6 +727,54 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + + bus6_mux215: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus6_mux216: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus6_mux217: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus6_mux218: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + bus6_mux219: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + bus6_mux220: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + bus6_mux221: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + bus6_mux222: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; @@ -684,6 +815,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus9_mux231: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus9_mux232: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus9_mux233: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus9_mux234: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; pca9545@71 { @@ -695,6 +850,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus9_mux235: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus9_mux236: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus9_mux237: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus9_mux238: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; }; @@ -725,6 +904,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus10_mux239: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus10_mux240: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus10_mux241: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus10_mux242: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; pca9545@71 { @@ -736,6 +939,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus10_mux243: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus10_mux244: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus10_mux245: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus10_mux246: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; }; @@ -796,7 +1023,7 @@ interrupt-controller; #interrupt-cells = <2>; - i2c@0 { + bus12_mux247: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -807,7 +1034,7 @@ }; }; - i2c@1 { + bus12_mux248: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -818,7 +1045,7 @@ }; }; - i2c@2 { + bus12_mux249: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -829,7 +1056,7 @@ }; }; - i2c@3 { + bus12_mux250: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -857,6 +1084,53 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + bus13_mux251: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus13_mux252: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus13_mux253: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus13_mux254: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + bus13_mux255: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + bus13_mux256: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + bus13_mux257: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + bus13_mux258: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts new file mode 100644 index 000000000000..91dced7e7849 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; +#include "aspeed-g5.dtsi" +#include + +/ { + model = "Nicole BMC"; + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "platform:green:power"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + }; + + identify { + label = "platform:blue:indicator"; + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + }; + + fault { + label = "platform:red:fault"; + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; + }; + + attention { + label = "platform:yellow:alarm"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c2 { + status = "okay"; + /* CPU0 characterization connector */ +}; + +&i2c3 { + status = "okay"; + /* CLK GEN SI5338 */ +}; + +&i2c4 { + status = "okay"; + /* Voltage regulators for CPU0 */ +}; + +&i2c5 { + status = "okay"; + /* Voltage regulators for CPU1 */ +}; + +&i2c6 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c7 { + status = "okay"; + /* CPLD */ +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf", + "func_mode0","func_mode1","func_mode2","","", + /*E0-E7*/ "","ncsi_cfg","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","power-button","","","","","", + /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","software_pwrgood","","","","","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault", + "led-power","","","led-identify", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + + func_mode0 { + gpio-hog; + gpios = ; + output-low; + }; + func_mode1 { + gpio-hog; + gpios = ; + output-low; + }; + func_mode2 { + gpio-hog; + gpios = ; + output-low; + }; + seq_cont { + gpio-hog; + gpios = ; + output-low; + }; + ncsi_cfg { + gpio-hog; + input; + gpios = ; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index edfa44fe1f75..fd2e014dae75 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -231,23 +231,52 @@ }; &gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","power-button","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","led-fault","", + "led-identify","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","","fsi-trans","","","led-power","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","","fsi-data","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + nic_func_mode0 { gpio-hog; gpios = ; output-low; - line-name = "nic_func_mode0"; }; nic_func_mode1 { gpio-hog; gpios = ; output-low; - line-name = "nic_func_mode1"; }; seq_cont { gpio-hog; gpios = ; output-low; - line-name = "seq_cont"; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index ff49ec76fa7c..13c4aa02f4de 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -31,6 +31,59 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -89,6 +142,49 @@ linux,code = <7>; }; }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + + iio-hwmon-bmp280 { + compatible = "iio-hwmon"; + io-channels = <&bmp 1>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "fsi-mux","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "power-button","","","checkstop","","presence-ps1","","led-rear-fault", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","presence-ps0","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "led-rear-power","led-rear-id","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; }; &fmc { @@ -132,6 +228,10 @@ use-ncsi; }; +&emmc_controller { + status = "okay"; +}; + &emmc { status = "okay"; }; @@ -142,6 +242,9 @@ #address-cells = <2>; #size-cells = <0>; + fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + cfam@0,0 { reg = <0 0>; #address-cells = <1>; @@ -394,6 +497,11 @@ &i2c1 { status = "okay"; + + tpm: tpm@2e { + compatible = "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; }; &i2c2 { @@ -774,6 +882,10 @@ status = "okay"; }; +&vuart2 { + status = "okay"; +}; + &lpc_ctrl { status = "okay"; memory-region = <&flash_memory>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 421aa600148b..a0f99e34ac8e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -191,6 +191,40 @@ }; +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","air-water","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","","","","","", + /*E0-E7*/ "fsi-data","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "presence-ps1","","led-rear-fault","led-rear-power", + "led-rear-id","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","presence-ps0", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","fsi-trans","","","power-button","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &fmc { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index bc60ec291681..4bcc82046362 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -478,32 +478,61 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpioh_unbiased>; + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention", + "led-fault", + /*E0-E7*/ "","","","","","","","presence-pcie-e2b", + /*F0-F7*/ "","","","","","","","checkstop", + /*G0-G7*/ "fsi-clock","fsi-data","","","","","","", + /*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","", + /*I0-I7*/ "","","","power-button","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","", + /*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","", + "","fsi-mux","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","led-hdd-fault","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + line_iso_u146_en { gpio-hog; gpios = ; output-high; - line-name = "iso_u164_en"; }; ncsi_mux_en_n { gpio-hog; gpios = ; output-low; - line-name = "ncsi_mux_en_n"; }; line_bmc_i2c2_sw_rst_n { gpio-hog; gpios = ; output-high; - line-name = "bmc_i2c2_sw_rst_n"; }; line_bmc_i2c5_sw_rst_n { gpio-hog; gpios = ; output-high; - line-name = "bmc_i2c5_sw_rst_n"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 8e04303e8514..82f0213e3a3c 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -219,6 +219,16 @@ reg = <0x1e720000 0x8000>; // 32K }; + video: video@1e700000 { + compatible = "aspeed,ast2400-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <7>; + status = "disabled"; + }; + sdmmc: sd-controller@1e740000 { compatible = "aspeed,ast2400-sd-controller"; reg = <0x1e740000 0x100>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index f12ec04d3cbc..de7fd80b022a 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -224,6 +224,14 @@ #clock-cells = <1>; #reset-cells = <1>; + scu_ic: interrupt-controller@18 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-scu-ic"; + reg = <0x18 0x4>; + interrupts = <21>; + interrupt-controller; + }; + p2a: p2a-control@2c { compatible = "aspeed,ast2500-p2a-ctrl"; reg = <0x2c 0x4>; @@ -254,6 +262,17 @@ interrupts = <0x19>; }; + xdma: xdma@1e6e7000 { + compatible = "aspeed,ast2500-xdma"; + reg = <0x1e6e7000 0x100>; + clocks = <&syscon ASPEED_CLK_GATE_BCLK>; + resets = <&syscon ASPEED_RESET_XDMA>; + interrupts-extended = <&vic 6>, <&scu_ic 2>; + pcie-device = "bmc"; + aspeed,scu = <&syscon>; + status = "disabled"; + }; + adc: adc@1e6e9000 { compatible = "aspeed,ast2500-adc"; reg = <0x1e6e9000 0xb0>; @@ -426,22 +445,22 @@ #size-cells = <1>; ranges = <0x0 0x0 0x80>; - kcs1: kcs1@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; interrupts = <8>; - kcs_chan = <1>; status = "disabled"; }; - kcs2: kcs2@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; interrupts = <8>; - kcs_chan = <2>; status = "disabled"; }; - kcs3: kcs3@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; interrupts = <8>; - kcs_chan = <3>; status = "disabled"; }; }; @@ -455,10 +474,10 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; - kcs4: kcs4@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs4: kcs@94 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; interrupts = <8>; - kcs_chan = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 0a29b3b57a9d..9d8d8e18bc90 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -65,6 +65,7 @@ ; clocks = <&syscon ASPEED_CLK_HPLL>; arm,cpu-registers-not-fw-configured; + always-on; }; ahb { @@ -313,6 +314,22 @@ compatible = "aspeed,ast2600-smpmem"; reg = <0x180 0x40>; }; + + scu_ic0: interrupt-controller@560 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2600-scu-ic0"; + reg = <0x560 0x4>; + interrupts = ; + interrupt-controller; + }; + + scu_ic1: interrupt-controller@570 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2600-scu-ic1"; + reg = <0x570 0x4>; + interrupts = ; + interrupt-controller; + }; }; rng: hwrng@1e6e2524 { @@ -322,6 +339,29 @@ quality = <100>; }; + xdma: xdma@1e6e7000 { + compatible = "aspeed,ast2600-xdma"; + reg = <0x1e6e7000 0x100>; + clocks = <&syscon ASPEED_CLK_GATE_BCLK>; + resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>; + reset-names = "device", "root-complex"; + interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <&scu_ic0 2>; + pcie-device = "bmc"; + aspeed,scu = <&syscon>; + status = "disabled"; + }; + + video: video@1e700000 { + compatible = "aspeed,ast2600-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = ; + status = "disabled"; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; @@ -368,6 +408,7 @@ <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB1>; clock-names = "PCLK"; + status = "disabled"; }; uart1: serial@1e783000 { @@ -433,22 +474,23 @@ #size-cells = <1>; ranges = <0x0 0x0 0x80>; - kcs1: kcs1@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; interrupts = ; kcs_chan = <1>; status = "disabled"; }; - kcs2: kcs2@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; interrupts = ; - kcs_chan = <2>; status = "disabled"; }; - kcs3: kcs3@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; interrupts = ; - kcs_chan = <3>; status = "disabled"; }; }; @@ -462,10 +504,10 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; - kcs4: kcs4@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs4: kcs@94 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; interrupts = ; - kcs_chan = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi index 21876da7c442..c1c8650dafce 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -62,7 +62,7 @@ wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck2>; + clocks = <&pmc PMC_TYPE_SYSTEM 10>; clock-names = "mclk"; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts index 8734e7f8939e..0da1f0557eaf 100644 --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -283,7 +283,7 @@ &flx3 { status = "okay"; - uart6: serial@200 { + uart8: serial@200 { status = "okay"; }; }; @@ -291,7 +291,7 @@ &flx4 { status = "okay"; - i2c2: i2c@600 { + i2c6: i2c@600 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 299e74d23184..7c3076e245ef 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -28,7 +28,7 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - serial6 = &uart6; + serial6 = &uart8; }; chosen { @@ -207,7 +207,7 @@ }; }; - pinctrl_flx4_default: flx4_i2c2_default { + pinctrl_flx4_default: flx4_i2c6_default { pinmux = , //DATA ; //CLK bias-disable; @@ -299,21 +299,8 @@ status = "disabled"; uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x400>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(11))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(12))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <32>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -324,22 +311,9 @@ atmel,flexcom-mode = ; status = "disabled"; - uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x400>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(17))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(18))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "usart"; + uart8: serial@200 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <32>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -350,23 +324,9 @@ atmel,flexcom-mode = ; status = "disabled"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(19))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(20))>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + i2c6: i2c@600 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <16>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index b484745bf2d4..a5f5718c711a 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -542,6 +542,18 @@ }; }; + sdmmc1 { + pinctrl_sdmmc1_default: sdmmc1 { + atmel,pins = + ; /* PA4 DAT3 periph B with pullup */ + }; + }; + gpio_keys { pinctrl_key_gpio_default: pinctrl_key_gpio { atmel,pins = ; @@ -568,6 +580,15 @@ disable-wp; }; +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + no-1-8-v; + non-removable; + status = "disabled"; /* Conflict with flx4. */ +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi>; @@ -579,6 +600,8 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; at91bootstrap@0 { diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 6281590150c8..b1f994c0ae79 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -13,6 +13,10 @@ model = "Atmel SAMA5D27 SoM1"; compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + i2c0 = &i2c0; + }; + clocks { slow_xtal { clock-frequency = <32768>; @@ -34,12 +38,44 @@ pinctrl-0 = <&pinctrl_qspi1_default>; flash@0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; + + at91bootstrap@00000000 { + label = "at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@00040000 { + label = "bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@00100000 { + label = "bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@00140000 { + label = "bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@00180000 { + label = "device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@00200000 { + label = "kernel"; + reg = <0x00200000 0x00600000>; + }; }; }; @@ -57,7 +93,25 @@ }; }; + i2c0: i2c@f8028000 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + status = "okay"; + + at24@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <8>; + }; + }; + pinctrl@fc038000 { + pinctrl_i2c0_default: i2c0_default { + pinmux = , + ; + bias-disable; + }; pinctrl_qspi1_default: qspi1_default { sck_cs { diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index b0853bf7901c..0e159f879c15 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -21,7 +21,7 @@ serial1 = &uart4; /* mikro BUS 1 */ serial2 = &uart2; /* mikro BUS 2 */ i2c1 = &i2c1; - i2c2 = &i2c2; + i2c2 = &i2c3; }; chosen { @@ -125,21 +125,13 @@ atmel,flexcom-mode = ; status = "okay"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + i2c3: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; - atmel,fifo-size = <16>; status = "okay"; }; }; @@ -178,27 +170,17 @@ atmel,flexcom-mode = ; status = "disabled"; - uart7: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "usart"; + uart8: serial@200 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <32>; status = "disabled"; /* Conflict with isc. */ }; - spi2: spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "spi_clk"; + spi5: spi@400 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <16>; status = "disabled"; /* Conflict with isc. */ }; }; @@ -207,43 +189,25 @@ atmel,flexcom-mode = ; status = "okay"; - uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - clock-names = "usart"; + uart9: serial@200 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <32>; - status = "disabled"; /* Conflict with spi3 and i2c3. */ + status = "disabled"; /* Conflict with spi6 and i2c6. */ }; - spi3: spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - clock-names = "spi_clk"; + spi6: spi@400 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; - atmel,fifo-size = <16>; - status = "okay"; /* Conflict with uart6 and i2c3. */ + status = "okay"; /* Conflict with uart5 and i2c6. */ }; - i2c3: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + i2c6: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <16>; - status = "disabled"; /* Conflict with uart6 and spi3. */ + status = "disabled"; /* Conflict with uart5 and spi6. */ }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index db3e2239eee8..a06700e53e4c 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -17,6 +17,10 @@ model = "Microchip SAMA5D27 WLSOM1"; compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + i2c0 = &i2c0; + }; + clocks { slow_xtal { clock-frequency = <32768>; @@ -32,18 +36,6 @@ atmel,flexcom-mode = ; uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(13))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(14))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; - clock-names = "usart"; pinctrl-0 = <&pinctrl_flx1_default>; pinctrl-names = "default"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 6b8461278950..6b38fa3f5568 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -77,18 +77,6 @@ status = "okay"; uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(11))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(12))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-names = "default"; atmel,use-dma-rx; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts new file mode 100644 index 000000000000..8d19925fc09e --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -0,0 +1,767 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Radu Pirea & Razvan Stefanescu, + * Codrin Ciubotariu , + * Cristian Birsan + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include +#include + +/ { + model = "Microchip SAMA5D2-ICP"; + compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; /* debug uart0 + mikro BUS 1 */ + serial1 = &uart1; /* mikro BUS 3 */ + serial3 = &uart3; /* mikro BUS 2 */ + serial5 = &uart7; /* flx2 */ + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + status = "okay"; + + sw4 { + label = "USER_PB1"; + gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; /* conflict with pwm0 */ + + red { + label = "red"; + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd_io_reg>; + vref-supply = <&vdd_io_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&flx0 { /* mikrobus2 spi */ + atmel,flexcom-mode = ; + status = "okay"; + + spi2: spi@400 { + dmas = <0>, <0>; + cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + switch0: ksz8563@0 { + compatible = "microchip,ksz8563"; + reg = <0>; + phy-mode = "mii"; + reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>; + + spi-max-frequency = <500000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&macb0>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&flx2 { + atmel,flexcom-mode = ; + status = "okay"; + + uart7: serial@200 { + pinctrl-0 = <&pinctrl_flx2_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; /* Conflict w/ qspi1. */ + }; +}; + +&flx3 { /* mikrobus1 spi */ + atmel,flexcom-mode = ; + status = "okay"; + + spi5: spi@400 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c6: i2c@600 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; + + regulators { + vdd_io_reg: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; + }; + }; +}; + +&i2c0 { /* mikrobus i2c */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus_i2c>; + status = "okay"; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <16>; + status = "okay"; + }; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <16>; + status = "disabled"; + }; + + eeprom@53 { + compatible = "atmel,24c32"; + reg = <0x53>; + pagesize = <16>; + status = "disabled"; + }; +}; + +&macb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&pioA { + pinctrl_adc_default: adc_default { + pinmux = , + , + ; + bias-disable; + }; + + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can0_default: can0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = , + , + ; + bias-pull-up; + }; + + pinctrl_qspi1_default: qspi1_default { + pinmux = , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = , + , + , + , + ; + bias-disable; + }; + + ck_cd { + pinmux = , + ; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = , + , + , + ; + bias-disable; + }; + + ck_cd { + pinmux = , + ; + bias-disable; + }; + }; + + pinctrl_mikrobus_i2c: mikrobus_i2c { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus1_an: mikrobus1_an { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_rst: mikrobus1_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_spi: mikrobus1_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_mikrobus1_pwm: mikrobus1_pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_int: mikrobus1_int { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_uart: mikrobus1_uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus2_an: mikrobus2_an { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_rst: mikrobus2_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_spi: mikrobus2_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_ksz_spi_cs: ksz_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_pwm: mikrobus2_pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_int: mikrobus2_int { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_uart: mikrobus2_uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_mikrobus3_an: mikrobus3_an { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_rst: mikrobus3_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_spi: mikrobus3_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_mikrobus3_pwm: mikrobus3_pwm { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_int: mikrobus3_int { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus3_uart: mikrobus3_uart { + pinmux = , + ; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = ; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = ; + bias-disable; + }; + + pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { + pinmux = , + ; + bias-pull-up; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = ; + bias-disable; + }; + + pinctrl_macb0_rst: macb0_sw_rst { + pinmux = ; + bias-disable; + }; + + pinctrl_flx2_default: flx2_default { + pinmux = , + , + , + ; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; + status = "disabled"; /* conflict with leds, HSIC */ +}; + +&qspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@0 { + label = "qspi: at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@40000 { + label = "qspi: bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@100000 { + label = "qspi: bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@140000 { + label = "qspi: bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@180000 { + label = "qspi: device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@200000 { + label = "qspi: kernel"; + reg = <0x00200000 0x00600000>; + }; + }; +}; + +&sdmmc0 { + no-1-8-v; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&spi0 { /* mikrobus3 spi */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus3_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 1c24ac8019ba..c894c7c788a9 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -18,9 +18,9 @@ compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; aliases { - serial0 = &uart0; - i2c0 = &i2c0; - i2c1 = &i2c1; + serial0 = &uart0; /* DBGU */ + i2c0 = &i2c0; /* mikroBUS 1 */ + i2c1 = &i2c1; /* XPRO EXT1 */ i2c2 = &i2c2; }; @@ -40,7 +40,7 @@ ahb { usb0: gadget@300000 { - atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -125,8 +125,6 @@ bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; - non-removable; - mmc-ddr-1_8v; status = "okay"; }; @@ -184,7 +182,7 @@ pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -193,20 +191,12 @@ status = "okay"; i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-1 = <&pinctrl_flx0_gpio>; sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; - atmel,fifo-size = <16>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; }; @@ -236,7 +226,7 @@ pinctrl-0 = <&pinctrl_i2c1_default>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@50 { @@ -414,6 +404,7 @@ label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 055ee53e4773..a927165ea7c2 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -16,6 +16,13 @@ model = "Atmel SAMA5D2 Xplained"; compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; + aliases { + serial0 = &uart1; /* DBGU */ + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; /* XPRO EXT2 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -72,6 +79,58 @@ }; apb { + qspi0: spi@f0020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0_default>; + status = "disabled"; /* conflict with sdmmc1 */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@00000000 { + label = "at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@00040000 { + label = "bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@00100000 { + label = "bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@00140000 { + label = "bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@00180000 { + label = "device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@00200000 { + label = "kernel"; + reg = <0x00200000 0x00600000>; + }; + + misc@00800000 { + label = "misc"; + reg = <0x00800000 0x00000000>; + }; + }; + }; + spi0: spi@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; @@ -133,7 +192,7 @@ pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-sda-hold-time-ns = <350>; status = "okay"; @@ -275,16 +334,25 @@ status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <32>; status = "okay"; }; + + i2c2: i2c@600 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-sda-hold-time-ns = <350>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + }; }; shdwc@f8048010 { @@ -325,21 +393,13 @@ atmel,flexcom-mode = ; status = "okay"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + i2c6: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx4_default>; pinctrl-1 = <&pinctrl_flx4_gpio>; sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; - atmel,fifo-size = <16>; + scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; @@ -356,7 +416,7 @@ i2c-digital-filter-width-ns = <35>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@54 { @@ -480,6 +540,12 @@ bias-disable; }; + pinctrl_i2c2_gpio: i2c2_gpio { + pinmux = , + ; + bias-disable; + }; + pinctrl_i2s0_default: i2s0_default { pinmux = , , @@ -535,6 +601,22 @@ bias-disable; }; + pinctrl_qspi0_default: qspi0_default { + sck_cs { + pinmux = , + ; + bias-disable; + }; + + data { + pinmux = , + , + , + ; + bias-pull-up; + }; + }; + pinctrl_sdmmc0_default: sdmmc0_default { cmd_data { pinmux = , diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi index 4ed8500a5cb8..1487b893cfa7 100644 --- a/arch/arm/boot/dts/at91-wb50n.dtsi +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -46,10 +46,6 @@ atmel,osc-bypass; }; -&usart1_clk { - atmel,clk-output-range = <0 132000000>; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 44385718d9d4..a5040f5ea641 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -101,259 +101,9 @@ compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <80000000 160000000 0>, - <150000000 180000000 2>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <80000000 160000000 0>, - <150000000 180000000 2>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 80000000>; - atmel,clk-divisors = <1 2 3 4>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 0 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = ; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = ; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = ; - }; - - prog3: prog3 { - #clock-cells = <0>; - reg = <3>; - interrupts = ; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - udpck: udpck { - #clock-cells = <0>; - reg = <2>; - clocks = <&usb>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <4>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - pck3: pck3 { - #clock-cells = <0>; - reg = <11>; - clocks = <&prog3>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <9>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <10>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <11>; - }; - - twi0_clk: twi0_clk { - reg = <12>; - #clock-cells = <0>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc2_clk: ssc2_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <19>; - }; - - tc3_clk: tc3_clk { - #clock-cells = <0>; - reg = <20>; - }; - - tc4_clk: tc4_clk { - #clock-cells = <0>; - reg = <21>; - }; - - tc5_clk: tc5_clk { - #clock-cells = <0>; - reg = <22>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <23>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <24>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; st: timer@fffffd00 { @@ -383,7 +133,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -395,7 +145,7 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 21 IRQ_TYPE_LEVEL_HIGH 0 22 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -405,7 +155,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -415,7 +165,7 @@ compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -429,7 +179,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "pclk"; status = "disabled"; }; @@ -440,7 +190,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "pclk"; status = "disabled"; }; @@ -451,7 +201,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; - clocks = <&ssc2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -463,7 +213,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "ether_clk"; status = "disabled"; }; @@ -803,7 +553,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -814,7 +564,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -825,7 +575,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffffa00 { @@ -836,7 +586,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; @@ -846,7 +596,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -859,7 +609,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -872,7 +622,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -885,7 +635,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -898,7 +648,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -907,7 +657,7 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -920,7 +670,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -947,7 +697,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fd179097a4bf..3034c23e697d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -103,14 +103,14 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe400 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; ramc1: ramc@ffffe600 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe600 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; @@ -128,271 +128,9 @@ compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0 - 695000000 750000000 1 0 - 645000000 700000000 2 0 - 595000000 650000000 3 0 - 545000000 600000000 0 1 - 495000000 555000000 1 1 - 445000000 500000000 2 1 - 400000000 450000000 3 1>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 133333333>; - atmel,clk-divisors = <1 2 4 3>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9g45-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = ; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = ; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - pioDE_clk: pioDE_clk { - #clock-cells = <0>; - reg = <5>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <9>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <10>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <11>; - }; - - twi0_clk: twi0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <16>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <18>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <19>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <20>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <23>; - }; - - ac97_clk: ac97_clk { - #clock-cells = <0>; - reg = <24>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <25>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <26>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <27>; - }; - - aestdessha_clk: aestdessha_clk { - #clock-cells = <0>; - reg = <28>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <29>; - }; - - vdec_clk: vdec_clk { - #clock-cells = <0>; - reg = <30>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; rstc@fffffd00 { @@ -405,7 +143,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; @@ -421,7 +159,7 @@ #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -431,7 +169,7 @@ #size-cells = <0>; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -440,7 +178,7 @@ reg = <0xffffec00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; @@ -883,7 +621,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff400 { @@ -894,7 +632,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff600 { @@ -905,7 +643,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffff800 { @@ -916,7 +654,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; pioE: gpio@fffffa00 { @@ -927,7 +665,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; @@ -937,7 +675,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -950,7 +688,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -963,7 +701,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -976,7 +714,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -989,7 +727,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; status = "disabled"; }; @@ -1000,7 +738,7 @@ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -1009,7 +747,7 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; i2c0: i2c@fff84000 { @@ -1020,7 +758,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; status = "disabled"; }; @@ -1032,7 +770,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; status = "disabled"; }; @@ -1042,7 +780,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -1053,7 +791,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "pclk"; status = "disabled"; }; @@ -1064,7 +802,7 @@ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ac97>; - clocks = <&ac97_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "ac97_clk"; status = "disabled"; }; @@ -1075,7 +813,7 @@ compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, <&adc_op_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -1111,7 +849,7 @@ compatible = "atmel,at91sam9g45-isi"; reg = <0xfffb4000 0x4000>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "isi_clk"; status = "disabled"; port { @@ -1125,7 +863,7 @@ reg = <0xfffb8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; @@ -1138,7 +876,7 @@ dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "mci_clk"; status = "disabled"; }; @@ -1152,7 +890,7 @@ dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "mci_clk"; status = "disabled"; }; @@ -1176,7 +914,7 @@ interrupts = <14 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1189,7 +927,7 @@ interrupts = <15 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1201,7 +939,7 @@ reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -1294,7 +1032,7 @@ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&lcd_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; @@ -1303,7 +1041,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1312,7 +1050,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1330,7 +1068,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 84bed6f55fcd..a3a5c82d9f29 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -72,9 +72,9 @@ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck1>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; clock-names = "xvclk"; - assigned-clocks = <&pck1>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; assigned-clock-rates = <25000000>; port { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index ea675174432e..a994d076dc7e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -104,7 +104,7 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; @@ -116,278 +116,10 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc>, <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, - <695000000 750000000 1 0>, - <645000000 700000000 2 0>, - <595000000 650000000 3 0>, - <545000000 600000000 0 1>, - <495000000 555000000 1 1>, - <445000000 500000000 2 1>, - <400000000 450000000 3 1>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <30000000 100000000 0>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>; - atmel,clk-output-range = <0 133333333>; - atmel,clk-divisors = <1 2 4 3>; - atmel,master-clk-have-div3-pres; - }; - - usb: usbck { - compatible = "atmel,at91sam9n12-clk-usb"; - #clock-cells = <0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = ; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = ; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioAB_clk: pioAB_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioCD_clk: pioCD_clk { - #clock-cells = <0>; - reg = <3>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <8>; - }; - - twi0_clk: twi0_clk { - reg = <9>; - #clock-cells = <0>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <10>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <14>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <15>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tcb_clk: tcb_clk { - #clock-cells = <0>; - reg = <17>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <18>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <19>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <20>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <23>; - }; - - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <25>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <27>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <28>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <29>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <30>; - }; - }; }; rstc@fffffe00 { @@ -400,7 +132,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; shdwc@fffffe10 { @@ -439,7 +171,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -452,7 +184,7 @@ #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -462,7 +194,7 @@ #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -470,7 +202,7 @@ compatible = "atmel,at91sam9n12-hlcdc"; reg = <0xf8038000 0x2000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk", "sys_clk", "slow_clk"; status = "disabled"; @@ -499,7 +231,7 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "dma_clk"; }; @@ -817,7 +549,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -828,7 +560,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioC: gpio@fffff800 { @@ -839,7 +571,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioD: gpio@fffffa00 { @@ -850,7 +582,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; }; @@ -860,7 +592,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -874,7 +606,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "pclk"; status = "disabled"; }; @@ -885,7 +617,7 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; status = "disabled"; }; @@ -896,7 +628,7 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -907,7 +639,7 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -918,7 +650,7 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -934,7 +666,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; status = "disabled"; }; @@ -949,7 +681,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; status = "disabled"; }; @@ -964,7 +696,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -980,7 +712,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1009,7 +741,7 @@ reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; status = "disabled"; }; @@ -1017,7 +749,7 @@ compatible = "atmel,at91sam9260-udc"; reg = <0xf803c000 0x4000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -1027,7 +759,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1045,7 +777,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d36e162a8817..870b83ff6b97 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -59,7 +59,7 @@ wm8904: codec@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "mclk"; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index e26ea9006378..c7f1d97e69bb 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -56,6 +56,16 @@ 3300000 0x0>; status = "okay"; }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; }; &firmware { @@ -69,7 +79,7 @@ "GLOBAL_RESET", "VDD_SD_IO_SEL", "CAM_GPIO", - "", + "SD_PWR_ON", ""; status = "okay"; }; @@ -174,6 +184,7 @@ /* EMMC2 is used to drive the SD card */ &emmc2 { vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; broken-cd; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index 2b1d9d4c0cde..4119271c979d 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -130,7 +130,6 @@ compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; interrupts = <1 10>; - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; }; vc4: gpu { diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi new file mode 100644 index 000000000000..8a55b6cded59 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's + * firmware interface. + */ + +#include + +&v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 53bf4579cc22..0549686134ea 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 82d6c4662ae4..b390006aef79 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 9e95fee78e19..0199ec98cd61 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -1,5 +1,6 @@ #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2837"; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index d2f7d984bba5..3ab3cd250da7 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -77,7 +77,7 @@ ranges = <0 0xf7000000 0x1000000>; - sdhci0: sdhci@ab0000 { + sdhci0: mmc@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; @@ -86,7 +86,7 @@ status = "disabled"; }; - sdhci1: sdhci@ab0800 { + sdhci1: mmc@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>; @@ -95,7 +95,7 @@ status = "disabled"; }; - sdhci2: sdhci@ab1000 { + sdhci2: mmc@ab1000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = ; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index e5c1f4213ff9..7cf3e6302d75 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -62,7 +62,7 @@ ranges = <0 0xf7000000 0x1000000>; - sdhci0: sdhci@ab0000 { + sdhci0: mmc@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 99d6872a6dfc..c44a32e873f4 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -122,7 +122,7 @@ ranges = <0 0xf7000000 0x1000000>; interrupt-parent = <&gic>; - sdhci0: sdhci@ab0000 { + sdhci0: mmc@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; @@ -131,7 +131,7 @@ status = "disabled"; }; - sdhci1: sdhci@ab0800 { + sdhci1: mmc@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; @@ -140,7 +140,7 @@ status = "disabled"; }; - sdhci2: sdhci@ab1000 { + sdhci2: mmc@ab1000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = ; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index c28ca0540f03..7702e048e110 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -308,14 +308,30 @@ ti,hwmods = "mcspi4"; }; - timer1: timer@2e000 { - compatible = "ti,dm814-timer"; - reg = <0x2e000 0x2000>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@2e000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = ; + ti,sysc-sidle = , + , + , + ; clocks = <&timer1_fck>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; }; uart1: uart@20000 { @@ -348,13 +364,29 @@ dma-names = "tx", "rx"; }; - timer2: timer@40000 { - compatible = "ti,dm814-timer"; - reg = <0x40000 0x2000>; - interrupts = <68>; - ti,hwmods = "timer2"; + timer2_target: target-module@40000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = ; + ti,sysc-sidle = , + , + , + ; clocks = <&timer2_fck>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,dm814-timer"; + reg = <0 0x1000>; + interrupts = <68>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; }; timer3: timer@42000 { @@ -735,3 +767,23 @@ }; #include "dm814x-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&devosc_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&devosc_ck>; + }; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 2a4934b60ded..3551a64963f8 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -440,23 +440,55 @@ dma-names = "tx", "rx"; }; - timer1: timer@4802e000 { - compatible = "ti,dm816-timer"; - reg = <0x4802e000 0x2000>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&timer1_fck>; + timer1_target: target-module@4802e000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x4802e000 0x4>, + <0x4802e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = ; + ti,sysc-sidle = , + , + , + ; + clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4802e000 0x1000>; + + timer1: timer@0 { + compatible = "ti,dm816-timer"; + reg = <0 0x1000>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + }; }; - timer2: timer@48040000 { - compatible = "ti,dm816-timer"; - reg = <0x48040000 0x2000>; - interrupts = <68>; - ti,hwmods = "timer2"; - clocks = <&timer2_fck>; + timer2_target: target-module@48040000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x48040000 0x4>, + <0x48040010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = ; + ti,sysc-sidle = , + , + , + ; + clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48040000 0x1000>; + + timer2: timer@0 { + compatible = "ti,dm816-timer"; + reg = <0 0x1000>; + interrupts = <68>; + clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + }; }; timer3: timer@48042000 { @@ -642,3 +674,23 @@ }; #include "dm816x-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 3081b04e8c08..89e0bdaf3a85 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -175,7 +175,6 @@ #size-cells = <0>; interrupts = <11>; clock-frequency = <400000>; - timeout-ms = <1000>; clocks = <&core_clk 0>; status = "okay"; }; @@ -248,7 +247,7 @@ marvell,#interrupts = <5>; }; - intc: main-interrupt-ctrl@20200 { + intc: interrupt-controller@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 23244b5a9942..f89a64cbcd53 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ */ +#include "dra74-ipu-dsp-common.dtsi" #include #include #include diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index af06a55d1c5c..7aeb30daf3b8 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -35,6 +35,40 @@ regulator-max-microvolt = <1800000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -537,3 +571,23 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; +}; diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi new file mode 100644 index 000000000000..a25749a1c365 --- /dev/null +++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common IPU and DSP data for TI DRA7xx/AM57xx platforms + */ + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; + +&ipu2 { + mboxes = <&mailbox6 &mbox_ipu2_ipc3x>; + ti,timers = <&timer3>; + ti,watchdog-timers = <&timer4>, <&timer9>; +}; + +&ipu1 { + mboxes = <&mailbox5 &mbox_ipu1_ipc3x>; + ti,timers = <&timer11>; + ti,watchdog-timers = <&timer7>, <&timer8>; +}; + +&dsp1 { + mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; + ti,timers = <&timer5>; + ti,watchdog-timers = <&timer10>; +}; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 2119a78e9c15..62ca89551219 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1143,7 +1143,6 @@ target-module@32000 { /* 0x48032000, ap 5 3e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x32000 0x4>, <0x32010 0x4>; reg-names = "rev", "sysc"; @@ -1163,15 +1162,14 @@ timer2: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; target-module@34000 { /* 0x48034000, ap 7 46.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer3"; reg = <0x34000 0x4>, <0x34010 0x4>; reg-names = "rev", "sysc"; @@ -1191,15 +1189,14 @@ timer3: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; target-module@36000 { /* 0x48036000, ap 9 4e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer4"; reg = <0x36000 0x4>, <0x36010 0x4>; reg-names = "rev", "sysc"; @@ -1210,8 +1207,9 @@ , ; /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>, + <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x36000 0x1000>; @@ -1219,8 +1217,8 @@ timer4: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1246,8 +1244,8 @@ timer9: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1853,8 +1851,8 @@ timer10: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1880,8 +1878,8 @@ timer11: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -3354,8 +3352,8 @@ , ; /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ - clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x20000 0x1000>; @@ -3381,8 +3379,9 @@ , ; /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ - clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>, + <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x22000 0x1000>; @@ -3417,8 +3416,8 @@ timer7: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -3444,8 +3443,8 @@ timer8: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -3471,8 +3470,8 @@ timer13: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -4295,7 +4294,6 @@ target-module@4000 { /* 0x4ae04000, ap 15 40.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x4000 0x4>, <0x4010 0x4>; reg-names = "rev", "sysc"; @@ -4430,9 +4428,8 @@ }; }; - target-module@8000 { /* 0x4ae18000, ap 9 30.0 */ + timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 30.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x8000 0x4>, <0x8010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 7191ee6a1b82..099546be5014 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -410,6 +410,42 @@ ti,hwmods = "dmm"; }; + ipu1: ipu@58820000 { + compatible = "ti,dra7-ipu"; + reg = <0x58820000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu1>; + status = "disabled"; + resets = <&prm_ipu 0>, <&prm_ipu 1>; + clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>; + firmware-name = "dra7-ipu1-fw.xem4"; + }; + + ipu2: ipu@55020000 { + compatible = "ti,dra7-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu2>; + status = "disabled"; + resets = <&prm_core 0>, <&prm_core 1>; + clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>; + firmware-name = "dra7-ipu2-fw.xem4"; + }; + + dsp1: dsp@40800000 { + compatible = "ti,dra7-dsp"; + reg = <0x40800000 0x48000>, + <0x40e00000 0x8000>, + <0x40f00000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x55c 10>; + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; + status = "disabled"; + resets = <&prm_dsp1 0>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + firmware-name = "dra7-dsp1-fw.xe66"; + }; + target-module@40d01000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x40d01000 0x4>, @@ -1044,3 +1080,13 @@ reg = <0x1c00 0x60>; }; }; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index fabeb7704753..a5d275ea7bd3 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -17,6 +17,33 @@ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { compatible = "regulator-gpio"; @@ -270,3 +297,18 @@ &extcon_usb2 { vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 01558a86af82..c84b63bf0fc8 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "dra72x.dtsi" +#include "dra7-ipu-dsp-common.dtsi" #include #include @@ -583,23 +584,6 @@ rx-num-evt = <32>; }; -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; -}; - &pcie1_rc { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 2bb2e8be6276..6e70858f6313 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -14,6 +14,33 @@ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_cma_pool: ipu2_cma@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_cma_pool: dsp1_cma@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_cma_pool: ipu1_cma@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + evm_1v8_sw: fixedregulator-evm_1v8 { compatible = "regulator-fixed"; regulator-name = "evm_1v8"; @@ -113,3 +140,18 @@ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; vmmc-supply = <&evm_1v8_sw>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_cma_pool>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_cma_pool>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_cma_pool>; +}; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 9adb77585ef1..951152fe206a 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -12,6 +12,33 @@ reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + evm_1v8_sw: fixedregulator-evm_1v8 { compatible = "regulator-fixed"; regulator-name = "evm_1v8"; @@ -78,3 +105,18 @@ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>; vmmc-supply = <&evm_1v8_sw>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index da334489b18f..ae23ec14e8fa 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -10,6 +10,12 @@ / { compatible = "ti,dra722", "ti,dra72", "ti,dra7"; + aliases { + rproc0 = &ipu1; + rproc1 = &ipu2; + rproc2 = &dsp1; + }; + pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi new file mode 100644 index 000000000000..b1147a4b77f9 --- /dev/null +++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms + */ + +#include "dra7-ipu-dsp-common.dtsi" + +&mailbox6 { + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; + +&dsp2 { + mboxes = <&mailbox6 &mbox_dsp2_ipc3x>; + ti,timers = <&timer6>; + ti,watchdog-timers = <&timer13>; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 7b1c61298253..46d8e7615180 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -29,6 +29,13 @@ }; }; + aliases { + rproc0 = &ipu1; + rproc1 = &ipu2; + rproc2 = &dsp1; + rproc3 = &dsp2; + }; + pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; @@ -124,6 +131,20 @@ ti,syscon-mmuconfig = <&dsp2_system 0x1>; }; }; + + dsp2: dsp@41000000 { + compatible = "ti,dra7-dsp"; + reg = <0x41000000 0x48000>, + <0x41600000 0x8000>, + <0x41700000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x560 10>; + iommus = <&mmu0_dsp2>, <&mmu1_dsp2>; + status = "disabled"; + resets = <&prm_dsp2 0>; + clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; + firmware-name = "dra7-dsp2-fw.xe66"; + }; }; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index e958cb3d1b31..820a0ece20d4 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -25,6 +25,40 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_cma_pool: ipu2_cma@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_cma_pool: dsp1_cma@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_cma_pool: ipu1_cma@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_cma_pool: dsp2_cma@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + vsys_12v0: fixedregulator-vsys12v0 { /* main supply */ compatible = "regulator-fixed"; @@ -548,3 +582,23 @@ data-lanes = <1 2>; }; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_cma_pool>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_cma_pool>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_cma_pool>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_cma_pool>; +}; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index ce50c4dc6f2a..3af1ab4458ef 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -117,6 +117,8 @@ ricoh619: pmic@32 { compatible = "ricoh,rc5t619"; reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; system-power-controller; regulators { diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 248bd372fe70..ca29d7ed8216 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -57,7 +57,8 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 86c26a4edfd7..aba8350cfdaf 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -50,9 +50,15 @@ }; }; + wlan_pwrseq: mshc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + }; + i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; @@ -605,8 +611,6 @@ }; &mshc_0 { - #address-cells = <1>; - #size-cells = <0>; broken-cd; non-removable; cap-mmc-highspeed; @@ -625,10 +629,48 @@ status = "okay"; }; +&mshc_1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4334-fmac"; + reg = <1>; + + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { assigned-clocks = <&cmu CLK_SCLK_UART0>; assigned-clock-rates = <100000000>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps14_osc S2MPS11_CLK_BT>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts new file mode 100644 index 000000000000..6d0c04d77a39 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -0,0 +1,768 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2020 Stenkin Evgeniy + * Copyright (c) 2020 Paul Cercueil + */ + +/dts-v1/; +#include "exynos4210.dtsi" +#include "exynos4412-ppmu-common.dtsi" + +#include +#include + +/ { + model = "Samsung Galaxy S2 (GT-I9100)"; + compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + vol-down { + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "volume down"; + debounce-interval = <10>; + }; + + vol-up { + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "volume up"; + debounce-interval = <10>; + }; + + power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + ok { + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "ok"; + debounce-interval = <10>; + }; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + + i2c_max17042_fuel: i2c-gpio { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + + battery@36 { + compatible = "maxim,max17042"; + + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&max17042_fuel_irq>; + pinctrl-names = "default"; + + reg = <0x36>; + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + }; + }; + + spi-lcd { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + num-chipselects = <1>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; + + lcd@0 { + compatible = "samsung,ld9040"; + reg = <0>; + + spi-max-frequency = <1200000>; + + vdd3-supply = <&vmipi_reg>; + vci-supply = <&vcclcd_reg>; + + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + power-on-delay = <10>; + reset-delay = <10>; + + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; +}; + +&camera { + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + +&ehci { + status = "okay"; + + phys = <&exynos_usbphy 1>; + phy-names = "host"; +}; + +&exynos_usbphy { + status = "okay"; + + vbus-supply = <&safe1_sreg>; +}; + +&fimc_0 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_1 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_2 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_3 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimd { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; +}; + +&gpu { + status = "okay"; + + mali-supply = <&vg3d_breg>; + regulator-microvolt-offset = <50000>; + regulator-microsecs-delay = <50>; +}; + +&hsotg { + status = "okay"; + + dr_mode = "otg"; + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; +}; + +&i2c_3 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + + mxt224-touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c_5 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; + pinctrl-names = "default"; + + regulators { + vadc_reg: LDO1 { + regulator-name = "VADC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + }; + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vhsic_reg: LDO5 { + regulator-name = "VHSIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vtouch_reg: LDO11 { + regulator-name = "TOUCH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vmotor_reg: LDO14 { + regulator-name = "VCC_2.8V_MOTOR"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vled_reg: LDO15 { + regulator-name = "LED_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vtf_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vtouchled_reg: LDO18 { + regulator-name = "TOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vg3d_breg: BUCK3 { + regulator-name = "G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + regulator-always-on; + }; + + chargercv_reg: CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <4100000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_7 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-states { + gpa0-0 { + samsung,pins = "gpa0-0"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + gpa0-1 { + samsung,pins = "gpa0-1"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + gpa0-2 { + samsung,pins = "gpa0-2"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + gpa0-3 { + samsung,pins = "gpa0-3"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + }; +}; + +&pinctrl_1 { + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = ; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + usb_sel: usb-sel { + samsung,pins = "gpl0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + bt_en: bt-en { + samsung,pins = "gpl0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + bt_res: bt-res { + samsung,pins = "gpl1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + otg_gp: otg-gp { + samsung,pins = "gpx3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + mag_mhl_gpio: mag-mhl-gpio { + samsung,pins = "gpd0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + max8997_irq: max8997-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = ; + }; + + max17042_fuel_irq: max17042-fuel-irq { + samsung,pins = "gpx2-3"; + samsung,pin-pud = ; + }; + + tsp224_irq: tsp224-irq { + samsung,pins = "gpx0-4"; + samsung,pin-pud = ; + }; +}; + +&sdhci_0 { + status = "okay"; + + bus-width = <8>; + non-removable; + vmmc-supply = <&vemmc_reg>; + + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>; + pinctrl-names = "default"; +}; + +&sdhci_2 { + status = "okay"; + + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vtf_reg>; + + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>; + pinctrl-names = "default"; +}; + +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&vtf_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0d1e1a9c2f6e..890525b10d22 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -251,12 +251,7 @@ }; buck1_reg: BUCK1 { - /* - * HACK: The real name is VDD_ARM_1.2V, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM_1.2V"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 7c39dd1c4d3a..3d791db6095c 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -121,6 +121,11 @@ }; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -280,11 +285,10 @@ max8997_pmic@66 { compatible = "maxim,max8997-pmic"; - interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>; reg = <0x66>; - interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; max8997,pmic-buck1-uses-gpio-dvs; max8997,pmic-buck2-uses-gpio-dvs; @@ -403,12 +407,7 @@ }; varm_breg: BUCK1 { - /* - * HACK: The real name is VARM_1.2V_C210, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; + regulator-name = "VARM_1.2V_C210"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -471,6 +470,30 @@ status = "okay"; }; +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&tflash_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9dda6bdb9253..02fde1a75ebd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -50,6 +50,11 @@ enable-active-high; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -164,7 +169,8 @@ hdmi_ddc: i2c-ddc { compatible = "i2c-gpio"; - gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -317,7 +323,7 @@ max8952,sync-freq = <0>; max8952,ramp-speed = <0>; - regulator-name = "vdd_arm"; + regulator-name = "VARM_1.2V_C210"; regulator-min-microvolt = <770000>; regulator-max-microvolt = <1400000>; regulator-always-on; @@ -563,6 +569,29 @@ status = "okay"; }; +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&ldo5_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; /delete-property/dmas; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 44f97546dd0a..53b3ca3effab 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -53,7 +53,8 @@ i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -68,7 +69,8 @@ i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 3023bc3b68ce..2c8111c6b065 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -140,7 +140,8 @@ i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -188,7 +189,8 @@ i2c_max77693_fuel: i2c-gpio-3 { compatible = "i2c-gpio"; - gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -228,7 +230,8 @@ i2c-mhl { compatible = "i2c-gpio"; - gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -820,7 +823,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -831,7 +834,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -842,7 +845,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; @@ -853,7 +856,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 73d6a71da88d..a5c1ce1e396c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -430,7 +430,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -438,7 +438,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -446,7 +446,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1050000>; regulator-always-on; @@ -454,7 +454,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1100000>; regulator-microvolt-offset = <50000>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ecd14b283a6b..dc865be40751 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -363,7 +363,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -372,7 +372,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -381,7 +381,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -390,7 +390,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -399,7 +399,7 @@ }; buck5_reg: BUCK5 { - regulator-name = "vdd_m12"; + regulator-name = "VDD_M12"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -408,7 +408,7 @@ }; buck6_reg: BUCK6 { - regulator-name = "vdd12_5m"; + regulator-name = "VDD12_5M"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -417,7 +417,7 @@ }; buck9_reg: BUCK9 { - regulator-name = "vddf28_emmc"; + regulator-name = "VDDF28_EMMC"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <3000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6904091d4837..c4cc7611898c 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -454,7 +454,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -463,7 +463,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <912500>; regulator-max-microvolt = <1300000>; regulator-always-on; @@ -472,7 +472,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -481,7 +481,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1300000>; regulator-always-on; @@ -641,9 +641,8 @@ pinctrl-0 = <&i2c2_gpio_bus>; status = "okay"; compatible = "i2c-gpio"; - gpios = <&gpa0 6 0 /* sda */ - &gpa0 7 0 /* scl */ - >; + sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index e9a09dd0a49b..dd7f8385d81e 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -673,7 +673,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "PVDD_ARM_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1500000>; regulator-always-on; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index d325658901c5..1f4ecbca5225 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -288,11 +288,6 @@ reg = <0x53fa8000 0x4000>; }; - gpr: iomuxc-gpr@53fa8000 { - compatible = "fsl,imx50-iomuxc-gpr", "syscon"; - reg = <0x53fa8000 0xc>; - }; - pwm1: pwm@53fb4000 { #pwm-cells = <2>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; @@ -333,9 +328,10 @@ status = "disabled"; }; - src: src@53fd0000 { + src: reset-controller@53fd0000 { compatible = "fsl,imx50-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 92fbb90bec57..d3583aad8323 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -439,9 +439,10 @@ status = "disabled"; }; - src: src@73fd0000 { + src: reset-controller@73fd0000 { compatible = "fsl,imx51-src"; reg = <0x73fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index 0a475c234054..cfb18849a92b 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -59,23 +59,26 @@ }; dvi-converter { - #address-cells = <1>; - #size-cells = <0>; compatible = "ti,tfp410"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - tfp410_in: endpoint { - remote-endpoint = <&display0_out>; + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&display0_out>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 8536f59f59e6..afa57bf7b0ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -588,9 +588,10 @@ status = "disabled"; }; - src: src@53fd0000 { + src: reset-controller@53fd0000 { compatible = "fsl,imx53-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts new file mode 100644 index 000000000000..223275f028f1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-eval-v3.dts" +#include "imx6qdl-colibri-v1_1-uhs.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", + "toradex,colibri_imx6dl-v1_1", + "toradex,colibri_imx6dl-eval-v3", + "toradex,colibri_imx6dl", + "fsl,imx6dl"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; + /* + * Please make sure your carrier board does not pull-up any of + * the MMC/SD signals to 3.3 volt before attempting to activate + * UHS-I support. + * To let signaling voltage be changed to 1.8V, please + * delete no-1-8-v property (example below): + * /delete-property/no-1-8-v; + */ +}; diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index bb74fc62d913..a2dd7e549568 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -22,6 +22,53 @@ clock-frequency = <24000000>; }; + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + ddc-i2c-bus = <&i2c2>; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + sound { compatible = "fsl,imx-audio-sgtl5000"; model = "imx-sgtl5000"; @@ -65,6 +112,15 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <&sw2_reg>; }; + + touchscreen@38 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + }; }; &iomuxc { @@ -77,9 +133,7 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 - MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 @@ -132,6 +186,52 @@ >; }; + pinctrl_ipu1_lcdif: ipu1-lcdif-grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_touchscreen: touchscreen-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1 + >; + }; + pinctrl_pcie: pcie-grp { fsl,pins = < MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 @@ -139,6 +239,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -146,6 +250,13 @@ status = "okay"; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; + status = "okay"; +}; + &ssi1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi new file mode 100644 index 000000000000..7672fbfc29be --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +&iomuxc { + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; + wakeup-source; + keep-power-in-suspend; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 6e3c6b4925a7..240b86d2eb71 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -193,7 +193,16 @@ regulator-always-on; }; - /* vgen3: unused */ + /* + * +V3.3_1.8_SD1 coming off VGEN3 and supplying + * the i.MX 6 NVCC_SD1. + */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index dc646b72b59a..bb3597132c62 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -258,6 +258,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -359,6 +367,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index e8e36dfd0a6b..69ca70d3baa8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -295,6 +295,15 @@ VDDIO-supply = <®_3p3v>; }; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + }; + tca8418: keypad@34 { compatible = "ti,tca8418"; pinctrl-names = "default"; @@ -389,6 +398,16 @@ }; }; }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + }; }; &i2c3 { @@ -609,6 +628,12 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0 + >; + }; + pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ @@ -616,6 +641,12 @@ >; }; + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 6d21cc6a9d4b..76d6cf57f1c3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -248,6 +248,15 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + }; + ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; @@ -320,6 +329,16 @@ }; }; }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + }; }; &i2c3 { @@ -501,6 +520,18 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 30fe47ff64a4..0857de505192 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -81,20 +81,6 @@ enable-active-high; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_bt: regulator-bt { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_bt>; - compatible = "regulator-fixed"; - regulator-name = "bt"; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - startup-delay-us = <100>; - enable-active-high; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; }; }; @@ -231,9 +217,14 @@ /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; + pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; }; /* GPS */ @@ -259,7 +250,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <®_wl>; non-removable; bus-width = <4>; status = "okay"; @@ -288,6 +279,12 @@ >; }; + pinctrl_bten: btengrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + >; + }; + pinctrl_ecspi3: escpi3grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 @@ -393,12 +390,6 @@ >; }; - pinctrl_reg_bt: regbtgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 - >; - }; - pinctrl_reg_wl: regwlgrp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 6d7f6b9035bc..b06577808ff4 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,10 +53,21 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 48f50161ea21..32114cf6acee 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -74,7 +74,8 @@ interrupt-parent = <&gpc>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; #thermal-sensor-cells = <0>; }; @@ -857,7 +858,7 @@ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -1171,6 +1172,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; tzasc@21d0000 { /* TZASC1 */ diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 8230b45057a1..911d8cf77f2c 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -98,7 +98,8 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpc>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; }; @@ -677,7 +678,7 @@ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6sl-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -961,6 +962,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; audmux: audmux@21d8000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 09f21aaee936..94e3df47d1ad 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -754,7 +754,7 @@ interrupts = ; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6sx-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 345ae9b0db37..5379a03391bd 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -677,7 +677,7 @@ interrupts = ; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6ul-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi index 9aaed85138cb..8773344b54aa 100644 --- a/arch/arm/boot/dts/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -16,7 +16,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &i2c1 { diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 89267cd59037..713483c39c9d 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -37,6 +37,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index c59d72e50920..219a0404a058 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -13,6 +13,10 @@ }; }; +&cpu1 { + cpu-supply = <®_DCDC2>; +}; + &gpmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 6b4acea1ef79..e0751e6ba3c0 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -121,6 +121,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 08ca1608fdb1..69f2c1ec8254 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -592,7 +592,7 @@ #define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 -#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0574 0x6 0x1 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 #define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 869efbc4af42..17cca8a9f77b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -162,6 +162,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi index 8ad3048dac0d..598aed1ffd99 100644 --- a/arch/arm/boot/dts/imx7d-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -9,3 +9,7 @@ #include "imx7d.dtsi" #include "imx7-tqma7.dtsi" + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 2b8d6cc45a53..e5e20b07f184 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -33,7 +33,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &ecspi1 { diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 39812c92bf0d..cbf0dbb4c198 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -182,7 +182,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &clks { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 5bf0b39fa99b..f6bb35d3ce51 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -624,7 +624,7 @@ clock-names = "ckil", "osc"; }; - src: src@30390000 { + src: reset-controller@30390000 { compatible = "fsl,imx7d-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = ; diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts new file mode 100644 index 000000000000..1412a1a968fc --- /dev/null +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for the ARM Integrator/AP platform + * with the IM-PD1 example logical module mounted. + */ + +#include "integratorap.dts" + +/ { + model = "ARM Integrator/AP with IM-PD1"; + compatible = "arm,integrator-ap"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + impd1_ram: vram@c2000000 { + /* 1 MB of designated video RAM on the IM-PD1 */ + compatible = "shared-dma-pool"; + reg = <0xc2000000 0x00100000>; + no-map; + }; + }; +}; + +&lm0 { + syscon@0 { + compatible = "arm,im-pd1-syscon", "syscon"; + reg = <0x00000000 0x1000>; + + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + + vco2: clock@04 { + compatible = "arm,impd1-vco2"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x04>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO2"; + }; + }; + + /* Also used for the Smart Card Interface SCI */ + impd1_uartclk: clock@1_4 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV4"; + }; + + /* For the SSP the clock is divided by 64 */ + impd1_sspclk: clock@1_64 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <64>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV64"; + }; + + /* Fixed regulator for the MMC */ + impd1_3v3: regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* Push buttons on the IM-PD1 */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + debounce-interval = <50>; + linux,code = ; + label = "UP"; + gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>; + }; + button@1 { + debounce-interval = <50>; + linux,code = ; + label = "DOWN"; + gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + button@2 { + debounce-interval = <50>; + linux,code = ; + label = "LEFT"; + gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + button@3 { + debounce-interval = <50>; + linux,code = ; + label = "UP"; + gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + button@4 { + debounce-interval = <50>; + linux,code = ; + label = "ESC"; + gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>; + }; + button@5 { + debounce-interval = <50>; + linux,code = ; + label = "ENTER"; + gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>; + }; + }; + + + bridge { + compatible = "ti,ths8134b", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + + uart@100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00100000 0x1000>; + interrupts-extended = <&impd1_vic 1>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart@200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00200000 0x1000>; + interrupts-extended = <&impd1_vic 2>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp@300000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x00300000 0x1000>; + interrupts-extended = <&impd1_vic 3>; + clocks = <&impd1_sspclk>, <&sysclk>; + clock-names = "spiclk", "apb_pclk"; + }; + + impd1_gpio0: gpio@400000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00400000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 4>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + impd1_gpio1: gpio@500000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00500000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 5>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + rtc@600000 { + compatible = "arm,pl030", "arm,primecell"; + reg = <0x00600000 0x1000>; + interrupts-extended = <&impd1_vic 6>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + mmc@700000 { + compatible = "arm,pl181", "arm,primecell"; + reg = <0x00700000 0x1000>; + interrupts-extended = <&impd1_vic 7>, + <&impd1_vic 8>; + clocks = <&sysclk>, <&sysclk>; + clock-names = "mclk", "apb_pclk"; + bus-width = <1>; + max-frequency = <515633>; + vmmc-supply = <&impd1_3v3>; + wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>; + cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>; + }; + + aaci@800000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x00800000 0x1000>; + interrupts-extended = <&impd1_vic 9>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + display@1000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x01000000 0x1000>; + interrupts-extended = <&impd1_vic 11>; + clocks = <&vco1>, <&sysclk>; + clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; + memory-region = <&impd1_ram>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + clcd_pads_vga_dac: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + }; + + impd1_vic: interrupt-controller@3000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x03000000 0x1000>; + /* Valid interrupts, 0-9 and 11 */ + valid-mask = <0x00000bff>; + /* LM site 0 has IRQ 9 on the PIC */ + interrupts-extended = <&pic 9>; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 198d66181c50..67d1f9b24a52 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -4,7 +4,9 @@ */ /dts-v1/; -/include/ "integrator.dtsi" +#include "integrator.dtsi" +#include +#include / { model = "ARM Integrator/AP"; @@ -107,9 +109,6 @@ syscon { compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; - interrupt-parent = <&pic>; - /* These are the logical module IRQs */ - interrupts = <9>, <10>, <11>, <12>; /* * SYSCLK clocks PCIv3 bridge, system controller and the @@ -239,4 +238,50 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; }; + + /* + * Logic module bus, we support up to 4 logical modules + * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000 + * and use interrupts 9, 10, 11 and 12 respectively. + */ + bus@c0000000 { + compatible = "arm,integrator-ap-lm"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc0000000 0xc0000000 0x40000000>; + dma-ranges; + + lm0: bus@c0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xc0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xc0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm1: bus@d0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xd0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xd0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm2: bus@e0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xe0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xe0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm3: bus@f0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xf0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 085e7326ea8e..2d94faf31fab 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -86,14 +86,14 @@ }; }; - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@1f0000 { + bm-sram@1f0000 { reg = <0x001f0000 0x8000>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index b7f10bf94576..db640bab8c1d 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -45,6 +45,19 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + + hdmi: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; }; &k2g_pinctrl { @@ -89,6 +102,13 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + ecap0_pins: ecap0_pins { pinctrl-single,pins = < K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ @@ -160,6 +180,40 @@ K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ >; }; + + vout_pins: pinmux_vout_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */ + K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */ + K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */ + K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */ + K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */ + K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */ + K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */ + K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */ + K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */ + K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */ + K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */ + K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */ + K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */ + K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */ + K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */ + K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */ + K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */ + K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */ + K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */ + K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */ + K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */ + K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */ + K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */ + K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */ + K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */ + K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */ + K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */ + K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */ + K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */ + >; + }; }; &uart0 { @@ -357,3 +411,50 @@ pinctrl-0 = <&emac_pins>; status = "okay"; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <400000>; + + sii9022: sii9022@3b { + #sound-dai-cells = <0>; + compatible = "sil,sii9022"; + reg = <0x3b>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&vout_pins>; + status = "ok"; + + port { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 1c833105d6c5..05a75019275e 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -95,14 +95,14 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x100000>; ranges = <0x0 0x0c000000 0x100000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@f7000 { + bm-sram@f7000 { reg = <0x000f7000 0x8000>; }; }; @@ -324,6 +324,28 @@ clock-names = "gpio"; }; + dss: dss@02540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = ; + + power-domains = <&k2g_pds 0x2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + max-memory-bandwidth = <230000000>; + }; + edma0: edma@2700000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02700000 0x8000>; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index ca0f198ba627..8a9447703310 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -57,14 +57,14 @@ &soc0 { /include/ "keystone-k2hk-clocks.dtsi" - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x600000>; ranges = <0x0 0x0c000000 0x600000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@5f0000 { + bm-sram@5f0000 { reg = <0x5f0000 0x8000>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 374c80124c4e..dff5fea72b2f 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -255,14 +255,14 @@ }; }; - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@1f8000 { + bm-sram@1f8000 { reg = <0x001f8000 0x8000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts new file mode 100644 index 000000000000..0d81c43a6a73 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Check Point L-50 Board Description + * Copyright 2020 Pawel Dembicki + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Check Point L-50"; + compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>; + pinctrl-names = "default"; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_button29: pmx_button29 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led38: pmx_led38 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + mvsdio@90000 { + status = "okay"; + cd-gpios = <&gpio1 14 9>; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + gpio2: gpio-expander@20{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1505q"; + reg = <0x20>; + + gpio-controller; + }; + + /* Three GPIOs from 0x21 exp. are undescribed in dts: + * 1: DSL module reset (active low) + * 5: mPCIE reset (active low) + * 6: Express card reset (active low) + */ + gpio3: gpio-expander@21{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1505q"; + reg = <0x21>; + + gpio-controller; + }; + + rtc@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_green { + label = "l-50:green:status"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + status_red { + label = "l-50:red:status"; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "l-50:green:wifi"; + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + internet_green { + label = "l-50:green:internet"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + internet_red { + label = "l-50:red:internet"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + usb1_green { + label = "l-50:green:usb1"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port3>; + }; + + usb1_red { + label = "l-50:red:usb1"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + usb2_green { + label = "l-50:green:usb2"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port1>; + }; + + usb2_red { + label = "l-50:red:usb2"; + gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_pwr { + compatible = "regulator-fixed"; + regulator-name = "usb2_pwr"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + usb1_pwr { + compatible = "regulator-fixed"; + regulator-name = "usb1_pwr"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + mpcie_pwr { + compatible = "regulator-fixed"; + regulator-name = "mpcie_pwr"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + express_card_pwr { + compatible = "regulator-fixed"; + regulator-name = "express_card_pwr"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; + + factory_defaults { + label = "factory_defaults"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy8: ethernet-phy@8 { + reg = <0x08>; + }; + + switch0: switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan7"; + }; + + switch0port5: port@5 { + reg = <5>; + phy-mode = "rgmii-txid"; + link = <&switch1port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <ð1port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + switch@11 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan8"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "dmz"; + }; + + switch1port5: port@5 { + reg = <5>; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "dsl"; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy8>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x000c0000>; + }; + + partition@a0000 { + label = "bootldr-env"; + reg = <0x000c0000 0x00040000>; + }; + + partition@100000 { + label = "kernel-1"; + reg = <0x00100000 0x00800000>; + }; + + partition@900000 { + label = "rootfs-1"; + reg = <0x00900000 0x07100000>; + }; + + partition@7a00000 { + label = "kernel-2"; + reg = <0x07a00000 0x00800000>; + }; + + partition@8200000 { + label = "rootfs-2"; + reg = <0x08200000 0x07100000>; + }; + + partition@f300000 { + label = "default_sw"; + reg = <0x0f300000 0x07900000>; + }; + + partition@16c00000 { + label = "logs"; + reg = <0x16c00000 0x01800000>; + }; + + partition@18400000 { + label = "preset_cfg"; + reg = <0x18400000 0x00100000>; + }; + + partition@18500000 { + label = "adsl"; + reg = <0x18500000 0x00100000>; + }; + + partition@18600000 { + label = "storage"; + reg = <0x18600000 0x07a00000>; + }; +}; + +&rtc { + status = "disabled"; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&sata_phy0 { + status = "disabled"; +}; + +&sata_phy1 { + status = "disabled"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + #trigger-source-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + hub_port3: port@3 { + reg = <3>; + #trigger-source-cells = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index 8cc8550242ef..b13aee570804 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -113,6 +113,20 @@ }; }; + auxdisplay { + compatible = "hit,hd44780"; + data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>, + <&gpio1 1 GPIO_ACTIVE_HIGH>, + <&gpio1 3 GPIO_ACTIVE_HIGH>, + <&gpio1 17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + display-height-chars = <2>; + display-width-chars = <16>; + }; + gpio-leds { compatible = "gpio-leds"; pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2161e23bd98e..6c8d94beae78 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -228,7 +228,7 @@ reg = <0x20128 0x4>; }; - intc: main-interrupt-ctrl@20200 { + intc: interrupt-controller@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 9b1fe99d55b1..5edf001f6138 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -242,6 +242,20 @@ status = "okay"; }; +&qspi { + status = "okay"; + + n25q128a130: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sai1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 5d198309058a..ae89deaa8c9c 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -229,6 +229,9 @@ interrupts = ; phys = <&usb0_phy>; phy-names = "usb2-phy"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <500>; + g-tx-fifo-size = <256 192 128 128 128>; dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index a2a47804fc4a..cb21ac9f517c 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -202,9 +202,8 @@ pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; - phy-mode = "rgmii"; phy-handle = <ð_phy>; - amlogic,tx-delay-ns = <4>; + phy-mode = "rgmii-id"; nvmem-cells = <ðernet_mac_address>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index e34b039b9357..ba36168b9c1b 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -425,8 +425,9 @@ clocks = <&clkc CLKID_ETH>, <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index d54477b1001c..cc498191ddd1 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -69,9 +69,7 @@ pinctrl-names = "default"; phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - amlogic,tx-delay-ns = <4>; + phy-mode = "rgmii-id"; mdio { compatible = "snps,dwmac-mdio"; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index 5bde7f502007..2397ba06d608 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -30,8 +30,9 @@ 0xc1108140 0x8>; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; }; @@ -64,6 +65,14 @@ compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; }; +&usb0_phy { + compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy"; +}; + +&usb1_phy { + compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy"; +}; + &wdt { compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index da10567b5aca..4306f3a6742b 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -364,7 +364,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <1 0>; + interrupts = <1>, <0>; interrupt-names = "rtc 1Hz", "rtc alarm"; interrupt-parent = <&intcmux5>; clocks = <&soc_clocks MMP2_CLK_RTC>; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 826f0a577859..57231d49d938 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -183,14 +183,14 @@ mrvl,intc-nr-irqs = <5>; }; - usb_otg_phy0: usb-otg-phy@d4207000 { + usb_otg_phy0: usb-phy@d4207000 { compatible = "marvell,mmp3-usb-phy"; reg = <0xd4207000 0x40>; #phy-cells = <0>; status = "disabled"; }; - usb_otg0: usb-otg@d4208000 { + usb_otg0: usb@d4208000 { compatible = "marvell,pxau2o-ehci"; reg = <0xd4208000 0x200>; interrupts = ; @@ -201,14 +201,14 @@ status = "disabled"; }; - hsic_phy0: hsic-phy@f0001800 { + hsic_phy0: usb-phy@f0001800 { compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0001800 0x40>; #phy-cells = <0>; status = "disabled"; }; - hsic0: hsic@f0001000 { + hsic0: usb@f0001000 { compatible = "marvell,pxau2o-ehci"; reg = <0xf0001000 0x200>; interrupts = ; @@ -222,14 +222,14 @@ status = "disabled"; }; - hsic_phy1: hsic-phy@f0002800 { + hsic_phy1: usb-phy@f0002800 { compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0002800 0x40>; #phy-cells = <0>; status = "disabled"; }; - hsic1: hsic@f0002000 { + hsic1: usb@f0002000 { compatible = "marvell,pxau2o-ehci"; reg = <0xf0002000 0x200>; interrupts = ; @@ -279,6 +279,16 @@ status = "disabled"; }; + mmc5: mmc@d4217000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4217000 0x120>; + clocks = <&soc_clocks MMP3_CLK_SDH4>; + clock-names = "io"; + interrupt-parent = <&hsi1_mux>; + interrupts = <0>; + status = "disabled"; + }; + camera0: camera@d420a000 { compatible = "marvell,mmp2-ccic"; reg = <0xd420a000 0x800>; @@ -472,7 +482,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <1 0>; + interrupts = <1>, <0>; interrupt-names = "rtc 1Hz", "rtc alarm"; interrupt-parent = <&rtc_mux>; clocks = <&soc_clocks MMP2_CLK_RTC>; @@ -521,7 +531,7 @@ }; }; - l2: l2-cache-controller@d0020000 { + l2: cache-controller@d0020000 { compatible = "marvell,tauros3-cache", "arm,pl310-cache"; reg = <0xd0020000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 88f8fd22302a..d1535f385f36 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include #include "mt2701.dtsi" / { @@ -61,6 +62,15 @@ >; default-brightness-level = <9>; }; + + usb_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 45 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &auxadc { @@ -230,3 +240,14 @@ &uart0 { status = "okay"; }; + +&usb2 { + status = "okay"; + usb-role-switch; + connector{ + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_vbus>; + }; +}; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 2093b38d6e6d..39b3a2f4bef4 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -671,6 +671,39 @@ }; }; + usb2: usb@11200000 { + compatible = "mediatek,mt2701-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = ; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + status = "disabled"; + }; + + u2phy0: usb-phy@11210000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0 0x11210000 0 0x0800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port2: usb-phy@1a1c4800 { + reg = <0 0x11210800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + ethsys: syscon@1b000000 { compatible = "mediatek,mt2701-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index f76b4a3c34b9..3a6b856e5b74 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2017-2018 MediaTek Inc. * Author: John Crispin * Sean Wang + * Ryder Lee * */ @@ -733,6 +734,30 @@ #reset-cells = <1>; }; + mali: gpu@13040000 { + compatible = "mediatek,mt7623-mali", "arm,mali-450"; + reg = <0 0x13040000 0 0x30000>; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", + "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3", + "pp"; + clocks = <&topckgen CLK_TOP_MMPLL>, + <&g3dsys CLK_G3DSYS_CORE>; + clock-names = "bus", "core"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>; + resets = <&g3dsys MT2701_G3DSYS_CORE_RST>; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts index b7606130ade9..0447748f9fa0 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -138,6 +138,7 @@ mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + phy-mode = "rgmii"; phy-handle = <&phy5>; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 0e453fec2e3a..8a5cb44bfe2f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -201,11 +201,32 @@ clock-frequency = <48000000>; }; - timer2: timer@4802a000 { - compatible = "ti,omap2420-timer"; - reg = <0x4802a000 0x400>; - interrupts = <38>; - ti,hwmods = "timer2"; + timer2_target: target-module@4802a000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x4802a000 0x4>, + <0x4802a010 0x4>, + <0x4802a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&gpt2_fck>, <&gpt2_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4802a000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap2420-timer"; + reg = <0 0x400>; + interrupts = <38>; + }; }; timer3: timer@48078000 { diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index aba542d63d6d..6c5c7c0e8b94 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -68,10 +68,23 @@ }; }; - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x20>; - ti,hwmods = "counter_32k"; + target-module@4000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + ; + clocks = <&func_32k_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0 0x20>; + }; }; }; @@ -194,12 +207,33 @@ }; }; - timer1: timer@48028000 { - compatible = "ti,omap2420-timer"; - reg = <0x48028000 0x400>; - interrupts = <37>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@48028000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x48028000 0x4>, + <0x48028010 0x4>, + <0x48028014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&gpt1_fck>, <&gpt1_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48028000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap2420-timer"; + reg = <0 0x400>; + interrupts = <37>; + ti,timer-alwon; + }; }; wd_timer2: wdt@48022000 { @@ -218,5 +252,15 @@ compatible = "ti,omap2420-i2c"; }; -/include/ "omap24xx-clocks.dtsi" -/include/ "omap2420-clocks.dtsi" +#include "omap24xx-clocks.dtsi" +#include "omap2420-clocks.dtsi" + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&func_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 15ef7593be12..6a1f5bb3c06a 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -81,10 +81,23 @@ }; }; - counter32k: counter@20000 { - compatible = "ti,omap-counter32k"; - reg = <0x20000 0x20>; - ti,hwmods = "counter_32k"; + target-module@20000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x20000 0x4>, + <0x20004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + ; + clocks = <&func_32k_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0 0x20>; + }; }; }; @@ -277,12 +290,33 @@ }; }; - timer1: timer@49018000 { - compatible = "ti,omap2420-timer"; - reg = <0x49018000 0x400>; - interrupts = <37>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@49018000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x49018000 0x4>, + <0x49018010 0x4>, + <0x49018014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&gpt1_fck>, <&gpt1_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49018000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap2420-timer"; + reg = <0 0x400>; + interrupts = <37>; + ti,timer-alwon; + }; }; mcspi3: spi@480b8000 { @@ -321,5 +355,15 @@ compatible = "ti,omap2430-i2c"; }; -/include/ "omap24xx-clocks.dtsi" -/include/ "omap2430-clocks.dtsi" +#include "omap24xx-clocks.dtsi" +#include "omap2430-clocks.dtsi" + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&func_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4ed3f93f5841..dfa158647d91 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -304,6 +304,39 @@ phys = <0 &hsusb2_phy>; }; +/* Unusable as clocksource because of unreliable oscillator */ +&counter32k { + status = "disabled"; +}; + +/* Unusable as clockevent because if unreliable oscillator, allow to idle */ +&timer1_target { + /delete-property/ti,no-reset-on-init; + /delete-property/ti,no-idle; + timer@0 { + /delete-property/ti,timer-alwon; + }; +}; + +/* Preferred always-on timer for clocksource */ +&timer12_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + /* Always clocked by secure_32k_fck */ + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; + &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 162d0726b008..c2995a280729 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -14,3 +14,36 @@ display2 = &tv0; }; }; + +/* Unusable as clocksource because of unreliable oscillator */ +&counter32k { + status = "disabled"; +}; + +/* Unusable as clockevent because if unreliable oscillator, allow to idle */ +&timer1_target { + /delete-property/ti,no-reset-on-init; + /delete-property/ti,no-idle; + timer@0 { + /delete-property/ti,timer-alwon; + }; +}; + +/* Preferred always-on timer for clocksource */ +&timer12_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + /* Always clocked by secure_32k_fck */ + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 634ea16a711e..1296d0643943 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -193,10 +193,23 @@ }; }; - counter32k: counter@48320000 { - compatible = "ti,omap-counter32k"; - reg = <0x48320000 0x20>; - ti,hwmods = "counter_32k"; + target-module@48320000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x48320000 0x4>, + <0x48320004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + ; + clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48320000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x20>; + }; }; intc: interrupt-controller@48200000 { @@ -637,19 +650,63 @@ dma-names = "rx"; }; - timer1: timer@48318000 { - compatible = "ti,omap3430-timer"; - reg = <0x48318000 0x400>; - interrupts = <37>; - ti,hwmods = "timer1"; - ti,timer-alwon; + timer1_target: target-module@48318000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x48318000 0x4>, + <0x48318010 0x4>, + <0x48318014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&gpt1_fck>, <&gpt1_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48318000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&gpt1_fck>; + clock-names = "fck"; + interrupts = <37>; + ti,timer-alwon; + }; }; - timer2: timer@49032000 { - compatible = "ti,omap3430-timer"; - reg = <0x49032000 0x400>; - interrupts = <38>; - ti,hwmods = "timer2"; + timer2_target: target-module@49032000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x49032000 0x4>, + <0x49032010 0x4>, + <0x49032014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&gpt2_fck>, <&gpt2_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49032000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0 0x400>; + interrupts = <38>; + }; }; timer3: timer@49034000 { @@ -723,13 +780,34 @@ ti,timer-pwm; }; - timer12: timer@48304000 { - compatible = "ti,omap3430-timer"; - reg = <0x48304000 0x400>; - interrupts = <95>; - ti,hwmods = "timer12"; - ti,timer-alwon; - ti,timer-secure; + timer12_target: target-module@48304000 { + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + reg = <0x48304000 0x4>, + <0x48304010 0x4>, + <0x48304014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&gpt12_fck>, <&gpt12_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48304000 0x1000>; + + timer12: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0 0x400>; + interrupts = <95>; + ti,timer-alwon; + ti,timer-secure; + }; }; usbhstll: usbhstll@48062000 { @@ -886,4 +964,14 @@ }; }; -/include/ "omap3xxx-clocks.dtsi" +#include "omap3xxx-clocks.dtsi" + +/* Preferred always-on timer for clockevent. Some boards must use dmtimer12 */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&omap_32k_fck>; + }; +}; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index ef59e4e97d7c..fcc52121ff09 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -974,7 +974,6 @@ target-module@4000 { /* 0x4a304000, ap 17 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x4000 0x4>, <0x4004 0x4>; reg-names = "rev", "sysc"; @@ -1139,9 +1138,8 @@ }; }; - target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ + timer1_target: target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x8000 0x4>, <0x8010 0x4>, <0x8014 0x4>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 763bdea8c829..6c2b07f0704d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -655,3 +655,13 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index f68740abb8aa..5217805bf126 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1003,6 +1003,7 @@ <0x00090000 0x00090000 0x002000>, /* ap 55 */ <0x00092000 0x00092000 0x001000>, /* ap 56 */ <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a5000 0x000a5000 0x001000>, <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ @@ -1908,6 +1909,36 @@ <0x00001000 0x000a5000 0x00001000>; }; + des_target: target-module@a5000 { /* 0x480a5000 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xa5030 0x4>, + <0xa5034 0x4>, + <0xa5038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_DES3DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa5000 0x00001000>; + status = "disabled"; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + }; + }; + target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */ compatible = "ti,sysc"; status = "disabled"; @@ -2150,7 +2181,6 @@ target-module@4000 { /* 0x4ae04000, ap 17 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "counter_32k"; reg = <0x4000 0x4>, <0x4010 0x4>; reg-names = "rev", "sysc"; @@ -2336,9 +2366,8 @@ }; }; - target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ + timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x8000 0x4>, <0x8010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 2ac7f021c284..fb889c5b00c9 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -247,6 +247,92 @@ hw-caps-temp-alert; }; + aes1_target: target-module@4b501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b501080 0x4>, + <0x4b501084 0x4>, + <0x4b501088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b501000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&sdma 111>, <&sdma 110>; + dma-names = "tx", "rx"; + }; + }; + + aes2_target: target-module@4b701000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b701080 0x4>, + <0x4b701084 0x4>, + <0x4b701088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b701000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&sdma 114>, <&sdma 113>; + dma-names = "tx", "rx"; + }; + }; + + sham_target: target-module@4b100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x4b100100 0x4>, + <0x4b100110 0x4>, + <0x4b100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap4-sham"; + reg = <0 0x300>; + interrupts = ; + dmas = <&sdma 119>; + dma-names = "rx"; + }; + }; + bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -581,3 +667,13 @@ #reset-cells = <1>; }; }; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; + }; +}; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 9a9e38245e88..4fe7735c7c58 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -97,7 +97,7 @@ resets = <&soc_clocks PXA168_CLK_GPIO>; interrupt-names = "gpio_mux"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; ranges; gcb0: gpio@d4019000 { @@ -119,6 +119,8 @@ twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; clocks = <&soc_clocks PXA168_CLK_TWSI0>; @@ -129,6 +131,8 @@ twsi2: i2c@d4025000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4025000 0x1000>; interrupts = <58>; clocks = <&soc_clocks PXA168_CLK_TWSI1>; @@ -139,7 +143,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <5 6>; + interrupts = <5>, <6>; interrupt-names = "rtc 1Hz", "rtc alarm"; clocks = <&soc_clocks PXA168_CLK_RTC>; resets = <&soc_clocks PXA168_CLK_RTC>; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index c237a0e4b12a..d19674812cd2 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -170,7 +170,7 @@ clocks = <&clks CLK_GPIO>; gpio-ranges = <&pinctrl 0 0 128>; interrupt-names = "gpio0", "gpio1", "gpio_mux"; - interrupts = <8 9 10>; + interrupts = <8>, <9>, <10>; gpio-controller; #gpio-cells = <0x2>; interrupt-controller; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 587a5e7f0702..352a39357810 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -109,7 +109,7 @@ clocks = <&soc_clocks PXA910_CLK_GPIO>; resets = <&soc_clocks PXA910_CLK_GPIO>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; ranges; gcb0: gpio@d4019000 { @@ -155,7 +155,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <5 6>; + interrupts = <5>, <6>; interrupt-names = "rtc 1Hz", "rtc alarm"; clocks = <&soc_clocks PXA910_CLK_RTC>; resets = <&soc_clocks PXA910_CLK_RTC>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b9839f86e703..74d8e2c8e4b3 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -166,6 +166,7 @@ <1 4 0xf08>, <1 1 0xf08>; clock-frequency = <48000000>; + always-on; }; soc { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 4021f661cd11..b912da9a3ff3 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -93,6 +93,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq806x", "qcom,scm"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index eaa1001d0a46..d4dc98214225 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "qcom-pma8084.dtsi" +#include +#include +#include / { model = "Samsung Galaxy S5"; @@ -14,6 +16,194 @@ chosen { stdout-path = "serial0:115200n8"; }; + + smd { + rpm { + rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + status = "okay"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; + }; + }; + }; + + /delete-node/ vreg-boost; }; &soc { @@ -21,4 +211,215 @@ status = "ok"; }; + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + pinctrl@fd510000 { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + }; + + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + /*extcon = <&smbb>, <&usb_id>;*/ + /*vbus-supply = <&chg_otg>;*/ + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + /*extcon = <&smbb>;*/ + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + + pinctrl@fd510000 { + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; + }; + + i2c@f9928000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; + }; +}; + +&spmi_bus { + pma8084@0 { + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2ea2308d91b3..51f5f904f9eb 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -974,6 +974,17 @@ #size-cells = <0>; }; + blsp_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 90feb2cf9960..0588d4446f9a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -83,7 +83,7 @@ }; cmt1: timer@e6138000 { - compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; + compatible = "renesas,r8a7740-cmt1"; reg = <0xe6138000 0x170>; interrupts = ; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts new file mode 100644 index 000000000000..1f5c35c66d91 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1H Qseven board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7742-iwg21m.dtsi" + +/ { + model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H"; + compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; + + aliases { + serial2 = &scifa2; + }; + + chosen { + bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait"; + stdout-path = "serial2:115200n8"; + }; +}; + +&pfc { + scifa2_pins: scifa2 { + groups = "scifa2_data_c"; + function = "scifa2"; + }; +}; + +&scifa2 { + pinctrl-0 = <&scifa2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi new file mode 100644 index 000000000000..85aff429d408 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave RZ/G1H Qseven SOM + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a7742.dtsi" +#include + +/ { + compatible = "iwave,g21m", "renesas,r8a7742"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + mmc1_pins: mmc1 { + groups = "mmc1_data4", "mmc1_ctrl"; + function = "mmc1"; + }; +}; + +&mmcif1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <4>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi new file mode 100644 index 000000000000..305d8086a3dd --- /dev/null +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a7742 SoC + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include +#include +#include +#include + +/ { + compatible = "renesas,r8a7742"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU2>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU3>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU0>; + next-level-cache = <&L2_CA7>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU1>; + next-level-cache = <&L2_CA7>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU2>; + next-level-cache = <&L2_CA7>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU3>; + next-level-cache = <&L2_CA7>; + }; + + L2_CA15: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A7742_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A7742_PD_CA7_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + pmu-0 { + compatible = "arm,cortex-a15-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + pmu-1 { + compatible = "arm,cortex-a7-pmu"; + interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7742"; + reg = <0 0xe6060000 0 0x250>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7742-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7742-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7742-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7742", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x100>; + }; + }; + + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe6300000 0x40000>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7742", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7742", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7742", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7742", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7742", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7742", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7742", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7742", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7742", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7742", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; + + scif2: serial@e6e56000 { + compatible = "renesas,scif-r8a7742", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e56000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7742", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7742", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + mmcif1: mmc@ee220000 { + compatible = "renesas,mmcif-r8a7742", + "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupts = ; + clocks = <&cpg CPG_MOD 305>; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, + <&dmac1 0xe1>, <&dmac1 0xe2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 305>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index e8b340bb99bc..fff123753b85 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -338,7 +338,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -348,7 +348,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -357,7 +357,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -367,7 +367,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -376,7 +376,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -386,7 +386,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index def840b8b2d3..5050ac19041d 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -338,7 +338,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -348,7 +348,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -357,7 +357,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -367,7 +367,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -376,7 +376,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -386,7 +386,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 7ab58d8bb740..b0d1fc24e97e 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -302,7 +302,7 @@ resets = <&cpg 407>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -312,7 +312,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -321,7 +321,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -331,7 +331,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -340,7 +340,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -350,7 +350,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e5ef9fd4284a..166d5566229d 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -427,7 +427,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -437,7 +437,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -446,7 +446,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -456,7 +456,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -465,7 +465,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -475,7 +475,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e5bd86731cd..225676fbe312 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -291,6 +291,17 @@ reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7791", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = ; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7791-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -350,7 +361,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -360,7 +371,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -369,7 +380,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -379,7 +390,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -388,7 +399,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -398,7 +409,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; @@ -407,7 +418,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; @@ -1067,6 +1078,76 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + adc: adc@e6e54000 { compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index dadbda16161b..1b62a7e06b42 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -336,7 +336,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -346,7 +346,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -355,7 +355,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -365,7 +365,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -374,7 +374,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -384,7 +384,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; @@ -393,7 +393,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 2c9e7a1ebfec..8d7f8798628a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -290,7 +290,7 @@ resets = <&cpg 407>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -300,7 +300,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -309,7 +309,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -319,7 +319,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -328,7 +328,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -338,7 +338,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 2ff9f152d29b..7154b827ea2f 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -16,7 +16,7 @@ leds: gpio-leds { compatible = "gpio-leds"; - work { + work_led: led-0 { gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 365eff621113..eed9e60cffa2 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -22,7 +22,7 @@ gpio-leds { compatible = "gpio-leds"; - blue { + blue_led: led-0 { label = "mk808:blue:power"; gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index c9a7f5409960..b0fef82c0a71 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -33,19 +33,19 @@ gpio-leds { compatible = "gpio-leds"; - green { + green_led: led-0 { label = "rock:green:user1"; gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; - blue { + blue_led: led-1 { label = "rock:blue:user2"; gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; - sleep { + sleep_led: led-2 { label = "rock:red:power"; gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts index 933ef69da32a..263393ac4fa6 100644 --- a/arch/arm/boot/dts/rk3229-xms6.dts +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -33,12 +33,18 @@ power-led { compatible = "gpio-leds"; - blue { + blue_led: led-0 { gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, + <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -131,7 +137,6 @@ &emmc { cap-mmc-highspeed; - disable-wp; non-removable; status = "okay"; }; @@ -202,6 +207,16 @@ status = "okay"; }; +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + vqmmc-supply = <&vccio_1v8>; + status = "okay"; +}; + &sdmmc { cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 5485a9918da6..b0fd92befdeb 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -615,6 +615,16 @@ status = "disabled"; }; + rga: rga@20060000 { + compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga"; + reg = <0x20060000 0x1000>; + interrupts = ; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>; + reset-names = "core", "axi", "ahb"; + }; + iep_mmu: iommu@20070800 { compatible = "rockchip,iommu"; reg = <0x20070800 0x100>; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 8c38bda21a7c..9a4a9749c405 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -45,20 +45,20 @@ leds { compatible = "gpio-leds"; - power { + power_led: led-0 { gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:blue:power"; pinctrl-names = "default"; - pinctrl-0 = <&power_led>; + pinctrl-0 = <&power_led_pin>; panic-indicator; }; - work { + work_led: led-1 { gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; - pinctrl-0 = <&work_led>; + pinctrl-0 = <&work_led_pin>; }; }; @@ -334,11 +334,11 @@ }; leds { - power_led: power-led { + power_led_pin: power-led-pin { rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led: work-led { + work_led_pin: work-led-pin { rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 5e0a19004e46..e5c4fd4ea67e 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -62,20 +62,20 @@ leds { compatible = "gpio-leds"; - work { + work_led: led-0 { gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; - pinctrl-0 = <&work_led>; + pinctrl-0 = <&work_led_pin>; }; - power { + power_led: led-1 { gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:green:power"; linux,default-trigger = "default-on"; pinctrl-names = "default"; - pinctrl-0 = <&power_led>; + pinctrl-0 = <&power_led_pin>; }; }; @@ -429,11 +429,11 @@ }; leds { - power_led: power-led { + power_led_pin: power-led-pin { rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led: work-led { + work_led_pin: work-led-pin { rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index c41d012c8850..213c9eb84f76 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -30,7 +30,7 @@ leds { compatible = "gpio-leds"; - work { + work_led: led-0 { gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; label = "miqi:green:user"; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index 77a47b9b756d..e43887c9635f 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -36,9 +36,9 @@ leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&user_led>; + pinctrl-0 = <&user_led_pin>; - user { + user_led: led-0 { label = "green_led"; gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -372,7 +372,7 @@ }; leds { - user_led: user-led { + user_led_pin: user-led-pin { rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index cdcdc921ee09..3cca4d0f9b09 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -41,13 +41,13 @@ gpio-leds { compatible = "gpio-leds"; - heartbeat { + heartbeat_led: led-0 { gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; label = "rock2:green:state1"; linux,default-trigger = "heartbeat"; }; - mmc { + mmc_led: led-1 { gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; label = "rock2:blue:state2"; linux,default-trigger = "mmc0"; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index acfaa12ec239..90e9be443fe6 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -46,17 +46,17 @@ gpio-leds { compatible = "gpio-leds"; - act-led { + act_led: led-0 { gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - heartbeat-led { + heartbeat_led: led-1 { gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pwr-led { + pwr_led: led-2 { gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0cd88774db95..2e1edd85f04a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -7,7 +7,6 @@ #include #include #include -#include #include / { diff --git a/arch/arm/boot/dts/rtd1195-horseradish.dts b/arch/arm/boot/dts/rtd1195-horseradish.dts new file mode 100644 index 000000000000..9d06d3d34c74 --- /dev/null +++ b/arch/arm/boot/dts/rtd1195-horseradish.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1195.dtsi" + +/ { + compatible = "realtek,horseradish", "realtek,rtd1195"; + model = "Realtek Horseradish EVB"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@a800 { + device_type = "memory"; + reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */ + <0x18070000 0x00090000>, /* r-bus to NOR flash */ + <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts new file mode 100644 index 000000000000..c7951b9a2c97 --- /dev/null +++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1195.dtsi" + +/ { + compatible = "mele,x1000", "realtek,rtd1195"; + model = "MeLE X1000"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@a800 { + device_type = "memory"; + reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */ + <0x18070000 0x00090000>, /* r-bus to NOR flash */ + <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi new file mode 100644 index 000000000000..21897210d9d0 --- /dev/null +++ b/arch/arm/boot/dts/rtd1195.dtsi @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/memreserve/ 0x00000000 0x0000a800; /* boot code */ +/memreserve/ 0x0000a800 0x000f5800; +/memreserve/ 0x17fff000 0x00001000; + +#include +#include + +/ { + compatible = "realtek,rtd1195"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + clock-frequency = <1000000000>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rpc_comm: rpc@b000 { + reg = <0x0000b000 0x1000>; + }; + + audio@1b00000 { + reg = <0x01b00000 0x400000>; + }; + + rpc_ringbuf: rpc@1ffe000 { + reg = <0x01ffe000 0x4000>; + }; + + secure@10000000 { + reg = <0x10000000 0x100000>; + no-map; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + ; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <27000000>; + }; + + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x0000a800>, + <0x18000000 0x18000000 0x00070000>, + <0x18100000 0x18100000 0x01000000>, + <0x80000000 0x80000000 0x80000000>; + + rbus: bus@18000000 { + compatible = "simple-bus"; + reg = <0x18000000 0x70000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x70000>; + + crt: syscon@0 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + iso: syscon@7000 { + compatible = "syscon", "simple-mfd"; + reg = <0x7000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + }; + + sb2: syscon@1a000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1a000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + misc: syscon@1b000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1b000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b000 0x1000>; + }; + + scpu_wrapper: syscon@1d000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1d000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1d000 0x1000>; + }; + }; + + gic: interrupt-controller@ff011000 { + compatible = "arm,cortex-a7-gic"; + reg = <0xff011000 0x1000>, + <0xff012000 0x2000>, + <0xff014000 0x2000>, + <0xff016000 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; +}; + +&crt { + reset1: reset-controller@0 { + compatible = "snps,dw-low-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@4 { + compatible = "snps,dw-low-reset"; + reg = <0x4 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@8 { + compatible = "snps,dw-low-reset"; + reg = <0x8 0x4>; + #reset-cells = <1>; + }; +}; + +&iso { + iso_reset: reset-controller@88 { + compatible = "snps,dw-low-reset"; + reg = <0x88 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x680 0x100>; + clocks = <&osc27M>; + }; + + uart0: serial@800 { + compatible = "snps,dw-apb-uart"; + reg = <0x800 0x400>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&iso_reset RTD1195_ISO_RSTN_UR0>; + clock-frequency = <27000000>; + status = "disabled"; + }; +}; + +&misc { + uart1: serial@200 { + compatible = "snps,dw-apb-uart"; + reg = <0x200 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&reset2 RTD1195_RSTN_UR1>; + clock-frequency = <27000000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 8ff70b856334..cf858029292e 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -11,9 +11,15 @@ / { compatible = "samsung,aries", "samsung,s5pv210"; - aliases { + aliases: aliases { + i2c4 = &i2c_sound; + i2c5 = &i2c_accel; i2c6 = &i2c_pmic; + i2c7 = &i2c_musb; i2c9 = &i2c_fuel; + i2c10 = &i2c_touchkey; + i2c11 = &i2c_prox; + i2c12 = &i2c_magnetometer; }; memory@30000000 { @@ -46,6 +52,21 @@ regulator-name = "vibrator-en"; enable-active-high; gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctr-0 = <&vibrator_ena>; + }; + + touchkey_vdd: regulator-fixed-1 { + compatible = "regulator-fixed"; + regulator-name = "VTOUCH_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_vdd_ena>; }; wifi_pwrseq: wifi-pwrseq { @@ -57,7 +78,71 @@ power-off-delay-us = <500>; }; - i2c_pmic: i2c-gpio-0 { + i2c_sound: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&sound_i2c_pins>; + + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + + #sound-dai-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clocks MOUT_CLKOUT>; + clock-names = "MCLK1"; + + AVDD2-supply = <&buck3_reg>; + DBVDD-supply = <&buck3_reg>; + CPVDD-supply = <&buck3_reg>; + SPKVDD1-supply = <&buck3_reg>; + SPKVDD2-supply = <&buck3_reg>; + + wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100 + 0xa101 0x0100 0x8100 0x0100 0x0100 + 0x0100>; + + wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>; + + wlf,lineout1-se; + wlf,lineout2-se; + + assigned-clocks = <&clocks MOUT_CLKOUT>; + assigned-clock-rates = <0>; + assigned-clock-parents = <&xusbxti>; + + pinctrl-names = "default"; + pinctrl-0 = <&codec_ldo>; + }; + }; + + i2c_accel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_i2c_pins>; + + status = "disabled"; + + /* bma023 accelerometer, no mainline binding */ + }; + + i2c_pmic: i2c-gpio-2 { compatible = "i2c-gpio"; sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -65,6 +150,9 @@ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_i2c_pins>; + pmic@66 { compatible = "maxim,max8998"; reg = <0x66>; @@ -81,6 +169,9 @@ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_dvs_pins &pmic_irq>; + regulators { ldo2_reg: LDO2 { regulator-name = "VALIVE_1.2V"; @@ -107,7 +198,6 @@ regulator-name = "VADC_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; @@ -134,8 +224,6 @@ regulator-name = "VLCD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* Till we get panel driver */ - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; @@ -234,8 +322,6 @@ regulator-name = "VCC_3.0V_LCD"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - /* Till we get panel driver */ - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; @@ -306,7 +392,29 @@ }; }; - i2c_fuel: i2c-gpio-1 { + i2c_musb: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&musb_i2c_pins>; + + fsa9480: musb@25 { + compatible = "fcs,fsa9480"; + reg = <0x25>; + interrupt-parent = <&gph2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&musb_irq>; + }; + }; + + i2c_fuel: i2c-gpio-4 { compatible = "i2c-gpio"; sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -314,6 +422,9 @@ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&fg_i2c_pins>; + fuelgauge@36 { compatible = "maxim,max17040"; interrupt-parent = <&vic0>; @@ -322,6 +433,64 @@ }; }; + i2c_touchkey: i2c-gpio-5 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_i2c_pins>; + + touchkey@20 { + compatible = "cypress,aries-touchkey"; + reg = <0x20>; + vdd-supply = <&touchkey_vdd>; + vcc-supply = <&buck3_reg>; + linux,keycodes = ; + interrupt-parent = <&gpj4>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_irq>; + }; + }; + + i2c_prox: i2c-gpio-6 { + compatible = "i2c-gpio"; + sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&prox_i2c_pins>; + + status = "disabled"; + + /* Sharp gp2a prox/light sensor, incomplete mainline binding */ + }; + + i2c_magnetometer: i2c-gpio-7 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&magnetometer_i2c_pins>; + + status = "disabled"; + + /* Yamaha yas529 magnetometer, no mainline binding */ + }; + vibrator: pwm-vibrator { compatible = "pwm-vibrator"; pwms = <&pwm 1 44642 0>; @@ -337,6 +506,45 @@ offset = <0x681c>; /* PS_HOLD_CONTROL */ value = <0x5200>; }; + + spi_lcd: spi-gpio-0 { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_spi_pins>; + + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + spi-cs-high; + spi-max-frequency = <1200000>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_rst>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo4_reg>; + + status = "okay"; }; &fimd { @@ -347,18 +555,13 @@ samsung,invert-vden; samsung,invert-vclk; - display-timings { - timing-0 { - /* 480x800@60Hz */ - clock-frequency = <25628040>; - hactive = <480>; - vactive = <800>; - hfront-porch = <16>; - hback-porch = <16>; - hsync-len = <2>; - vfront-porch = <28>; - vback-porch = <1>; - vsync-len = <2>; + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + fimd_ep: endpoint { + remote-endpoint = <&lcd_ep>; }; }; }; @@ -399,12 +602,39 @@ samsung,pin-val = <1>; }; + codec_ldo: codec-ldo { + samsung,pins = "gpf3-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + prox_i2c_pins: gp2a-i2c-pins { + samsung,pins = "gpg0-2", "gpg2-2"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + wlan_gpio_rst: wlan-gpio-rst { samsung,pins = "gpg1-2"; samsung,pin-function = ; samsung,pin-pud = ; }; + pmic_dvs_pins: pmic-dvs-pins { + samsung,pins = "gph0-3", "gph0-4", "gph0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + pmic_irq: pmic-irq { + samsung,pins = "gph0-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + wifi_host_wake: wifi-host-wake { samsung,pins = "gph2-4"; samsung,pin-function = ; @@ -419,6 +649,13 @@ samsung,pin-drv = ; }; + musb_irq: musq-irq { + samsung,pins = "gph2-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + tf_detect: tf-detect { samsung,pins = "gph3-4"; samsung,pin-function = ; @@ -432,12 +669,85 @@ samsung,pin-pud = ; }; + magnetometer_i2c_pins: yas529-i2c-pins { + samsung,pins = "gpj0-0", "gpj0-1"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + ts_irq: ts-irq { samsung,pins = "gpj0-5"; samsung,pin-function = ; samsung,pin-pud = ; samsung,pin-drv = ; }; + + vibrator_ena: vibrator-ena { + samsung,pins = "gpj1-1"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + touchkey_i2c_pins: touchkey-i2c-pins { + samsung,pins = "gpj3-0", "gpj3-1"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + touchkey_vdd_ena: touchkey-vdd-ena { + samsung,pins = "gpj3-2"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + musb_i2c_pins: musb-i2c-pins { + samsung,pins = "gpj3-4", "gpj3-5"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + accel_i2c_pins: accel-i2c-pins { + samsung,pins = "gpj3-6", "gpj3-7"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + pmic_i2c_pins: pmic-i2c-pins { + samsung,pins = "gpj4-0", "gpj4-3"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + touchkey_irq: touchkey-irq { + samsung,pins = "gpj4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + lcd_spi_pins: spi-lcd-pins { + samsung,pins = "mp01-1", "mp04-1", "mp04-3"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + fg_i2c_pins: fg-i2c-pins { + samsung,pins = "mp05-0", "mp05-1"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + sound_i2c_pins: sound-i2c-pins { + samsung,pins = "mp05-2", "mp05-3"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + panel_rst: panel-rst { + samsung,pins = "mp05-5"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; }; &pwm { @@ -454,11 +764,16 @@ pinctrl-names = "default"; cap-sd-highspeed; cap-mmc-highspeed; + keep-power-in-suspend; mmc-pwrseq = <&wifi_pwrseq>; non-removable; status = "okay"; + assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>; + assigned-clock-rates = <0>, <50000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; + wlan@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; @@ -475,6 +790,10 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>; pinctrl-names = "default"; status = "okay"; + + assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>; + assigned-clock-rates = <0>, <50000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; }; &uart0 { diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index 07a8d9bbe5b8..5e1b81823a8d 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -36,3 +36,252 @@ }; }; }; + +&pinctrl0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep_cfg>; + + /* Based on vendor kernel v2.6.35.7 */ + sleep_cfg: sleep-cfg { + PIN_SLP(gpa0-0, PREV, NONE); + PIN_SLP(gpa0-1, PREV, NONE); + PIN_SLP(gpa0-2, PREV, NONE); + PIN_SLP(gpa0-3, OUT1, NONE); + PIN_SLP(gpa0-4, PREV, NONE); + PIN_SLP(gpa0-5, PREV, NONE); + PIN_SLP(gpa0-6, PREV, NONE); + PIN_SLP(gpa0-7, PREV, NONE); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, OUT0, NONE); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, OUT0, NONE); + + PIN_SLP(gpb-0, OUT0, NONE); + PIN_SLP(gpb-1, OUT1, NONE); + PIN_SLP(gpb-2, OUT0, NONE); + PIN_SLP(gpb-3, PREV, NONE); + PIN_SLP(gpb-4, INPUT, NONE); + PIN_SLP(gpb-5, PREV, NONE); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, OUT0, NONE); + + PIN_SLP(gpc0-0, OUT0, NONE); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, OUT0, NONE); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, OUT0, NONE); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, DOWN); + PIN_SLP(gpd0-3, INPUT, DOWN); + + PIN_SLP(gpd1-0, INPUT, NONE); + PIN_SLP(gpd1-1, INPUT, NONE); + PIN_SLP(gpd1-2, INPUT, DOWN); + PIN_SLP(gpd1-3, INPUT, DOWN); + PIN_SLP(gpd1-4, INPUT, DOWN); + PIN_SLP(gpd1-5, INPUT, DOWN); + + PIN_SLP(gpe0-0, INPUT, DOWN); + PIN_SLP(gpe0-1, INPUT, DOWN); + PIN_SLP(gpe0-2, INPUT, DOWN); + PIN_SLP(gpe0-3, INPUT, DOWN); + PIN_SLP(gpe0-4, INPUT, DOWN); + PIN_SLP(gpe0-5, INPUT, DOWN); + PIN_SLP(gpe0-6, INPUT, DOWN); + PIN_SLP(gpe0-7, INPUT, DOWN); + + PIN_SLP(gpe1-0, INPUT, DOWN); + PIN_SLP(gpe1-1, INPUT, DOWN); + PIN_SLP(gpe1-2, INPUT, DOWN); + PIN_SLP(gpe1-3, OUT0, NONE); + PIN_SLP(gpe1-4, INPUT, DOWN); + + PIN_SLP(gpf0-0, OUT0, NONE); + PIN_SLP(gpf0-1, OUT0, NONE); + PIN_SLP(gpf0-2, OUT0, NONE); + PIN_SLP(gpf0-3, OUT0, NONE); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, OUT0, NONE); + PIN_SLP(gpf0-7, OUT0, NONE); + + PIN_SLP(gpf1-0, OUT0, NONE); + PIN_SLP(gpf1-1, OUT0, NONE); + PIN_SLP(gpf1-2, OUT0, NONE); + PIN_SLP(gpf1-3, OUT0, NONE); + PIN_SLP(gpf1-4, OUT0, NONE); + PIN_SLP(gpf1-5, OUT0, NONE); + PIN_SLP(gpf1-6, OUT0, NONE); + PIN_SLP(gpf1-7, OUT0, NONE); + + PIN_SLP(gpf2-0, OUT0, NONE); + PIN_SLP(gpf2-1, OUT0, NONE); + PIN_SLP(gpf2-2, OUT0, NONE); + PIN_SLP(gpf2-3, OUT0, NONE); + PIN_SLP(gpf2-4, OUT0, NONE); + PIN_SLP(gpf2-5, OUT0, NONE); + PIN_SLP(gpf2-6, OUT0, NONE); + PIN_SLP(gpf2-7, OUT0, NONE); + + PIN_SLP(gpf3-0, OUT0, NONE); + PIN_SLP(gpf3-1, OUT0, NONE); + PIN_SLP(gpf3-2, OUT0, NONE); + PIN_SLP(gpf3-3, OUT0, NONE); + PIN_SLP(gpf3-4, PREV, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpg0-0, INPUT, DOWN); + PIN_SLP(gpg0-1, INPUT, DOWN); + PIN_SLP(gpg0-2, INPUT, NONE); + PIN_SLP(gpg0-3, INPUT, DOWN); + PIN_SLP(gpg0-4, INPUT, DOWN); + PIN_SLP(gpg0-5, INPUT, DOWN); + PIN_SLP(gpg0-6, INPUT, DOWN); + + PIN_SLP(gpg1-0, OUT0, NONE); + PIN_SLP(gpg1-1, OUT1, NONE); + PIN_SLP(gpg1-2, PREV, NONE); + PIN_SLP(gpg1-3, OUT1, NONE); + PIN_SLP(gpg1-4, OUT1, NONE); + PIN_SLP(gpg1-5, OUT1, NONE); + PIN_SLP(gpg1-6, OUT1, NONE); + + PIN_SLP(gpg2-0, OUT0, NONE); + PIN_SLP(gpg2-1, OUT0, NONE); + PIN_SLP(gpg2-2, INPUT, NONE); + PIN_SLP(gpg2-3, OUT0, NONE); + PIN_SLP(gpg2-4, OUT0, NONE); + PIN_SLP(gpg2-5, OUT0, NONE); + PIN_SLP(gpg2-6, OUT0, NONE); + + PIN_SLP(gpg3-0, PREV, UP); + PIN_SLP(gpg3-1, PREV, UP); + PIN_SLP(gpg3-2, INPUT, NONE); + PIN_SLP(gpg3-3, INPUT, DOWN); + PIN_SLP(gpg3-4, OUT0, NONE); + PIN_SLP(gpg3-5, OUT0, NONE); + PIN_SLP(gpg3-6, INPUT, DOWN); + + PIN_SLP(gpi-0, PREV, NONE); + PIN_SLP(gpi-1, INPUT, DOWN); + PIN_SLP(gpi-2, PREV, NONE); + PIN_SLP(gpi-3, PREV, NONE); + PIN_SLP(gpi-4, PREV, NONE); + PIN_SLP(gpi-5, INPUT, DOWN); + PIN_SLP(gpi-6, INPUT, DOWN); + + PIN_SLP(gpj0-0, INPUT, NONE); + PIN_SLP(gpj0-1, INPUT, NONE); + PIN_SLP(gpj0-2, INPUT, NONE); + PIN_SLP(gpj0-3, INPUT, NONE); + PIN_SLP(gpj0-4, INPUT, NONE); + PIN_SLP(gpj0-5, INPUT, DOWN); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, INPUT, NONE); + + PIN_SLP(gpj1-0, OUT1, NONE); + PIN_SLP(gpj1-1, OUT0, NONE); + PIN_SLP(gpj1-2, INPUT, DOWN); + PIN_SLP(gpj1-3, PREV, NONE); + PIN_SLP(gpj1-4, PREV, NONE); + PIN_SLP(gpj1-5, OUT0, NONE); + + PIN_SLP(gpj2-0, INPUT, DOWN); + PIN_SLP(gpj2-1, INPUT, DOWN); + PIN_SLP(gpj2-2, OUT0, NONE); + PIN_SLP(gpj2-3, INPUT, DOWN); + PIN_SLP(gpj2-4, INPUT, DOWN); + PIN_SLP(gpj2-5, PREV, NONE); + PIN_SLP(gpj2-6, PREV, NONE); + PIN_SLP(gpj2-7, INPUT, DOWN); + + PIN_SLP(gpj3-0, INPUT, NONE); + PIN_SLP(gpj3-1, INPUT, NONE); + PIN_SLP(gpj3-2, OUT0, NONE); + PIN_SLP(gpj3-3, INPUT, DOWN); + PIN_SLP(gpj3-4, INPUT, NONE); + PIN_SLP(gpj3-5, INPUT, NONE); + PIN_SLP(gpj3-6, INPUT, NONE); + PIN_SLP(gpj3-7, INPUT, NONE); + + PIN_SLP(gpj4-0, INPUT, NONE); + PIN_SLP(gpj4-1, INPUT, DOWN); + PIN_SLP(gpj4-2, PREV, NONE); + PIN_SLP(gpj4-3, INPUT, NONE); + PIN_SLP(gpj4-4, INPUT, DOWN); + + PIN_SLP(mp01-0, OUT1, NONE); + PIN_SLP(mp01-1, OUT0, NONE); + PIN_SLP(mp01-2, INPUT, DOWN); + PIN_SLP(mp01-3, INPUT, DOWN); + PIN_SLP(mp01-4, OUT1, NONE); + PIN_SLP(mp01-5, INPUT, DOWN); + PIN_SLP(mp01-6, INPUT, DOWN); + PIN_SLP(mp01-7, INPUT, DOWN); + + PIN_SLP(mp02-0, INPUT, DOWN); + PIN_SLP(mp02-1, INPUT, DOWN); + PIN_SLP(mp02-2, INPUT, NONE); + PIN_SLP(mp02-3, INPUT, DOWN); + + PIN_SLP(mp03-0, INPUT, DOWN); + PIN_SLP(mp03-1, INPUT, DOWN); + PIN_SLP(mp03-2, OUT1, NONE); + PIN_SLP(mp03-3, OUT0, NONE); + PIN_SLP(mp03-4, INPUT, NONE); + PIN_SLP(mp03-5, OUT0, NONE); + PIN_SLP(mp03-6, INPUT, DOWN); + PIN_SLP(mp03-7, INPUT, DOWN); + + PIN_SLP(mp04-0, INPUT, DOWN); + PIN_SLP(mp04-1, OUT0, NONE); + PIN_SLP(mp04-2, INPUT, DOWN); + PIN_SLP(mp04-3, OUT0, NONE); + PIN_SLP(mp04-4, INPUT, DOWN); + PIN_SLP(mp04-5, INPUT, DOWN); + PIN_SLP(mp04-6, OUT0, NONE); + PIN_SLP(mp04-7, INPUT, DOWN); + + PIN_SLP(mp05-0, INPUT, NONE); + PIN_SLP(mp05-1, INPUT, NONE); + PIN_SLP(mp05-2, INPUT, NONE); + PIN_SLP(mp05-3, INPUT, NONE); + PIN_SLP(mp05-4, INPUT, DOWN); + PIN_SLP(mp05-5, OUT0, NONE); + PIN_SLP(mp05-6, INPUT, DOWN); + PIN_SLP(mp05-7, PREV, NONE); + + PIN_SLP(mp06-0, INPUT, DOWN); + PIN_SLP(mp06-1, INPUT, DOWN); + PIN_SLP(mp06-2, INPUT, DOWN); + PIN_SLP(mp06-3, INPUT, DOWN); + PIN_SLP(mp06-4, INPUT, DOWN); + PIN_SLP(mp06-5, INPUT, DOWN); + PIN_SLP(mp06-6, INPUT, DOWN); + PIN_SLP(mp06-7, INPUT, DOWN); + + PIN_SLP(mp07-0, INPUT, DOWN); + PIN_SLP(mp07-1, INPUT, DOWN); + PIN_SLP(mp07-2, INPUT, DOWN); + PIN_SLP(mp07-3, INPUT, DOWN); + PIN_SLP(mp07-4, INPUT, DOWN); + PIN_SLP(mp07-5, INPUT, DOWN); + PIN_SLP(mp07-6, INPUT, DOWN); + PIN_SLP(mp07-7, INPUT, DOWN); + }; +}; + +&wm8994 { + /* GPIO3 (BCLK2) and GPIO4 (LRCLK2) as outputs */ + wlf,gpio-cfg = <0xa101 0x8100 0x8100 0x8100 0x8100 0xa101 + 0x0100 0x8100 0x0100 0x0100 0x0100>; +}; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index cf161bbfbacf..5d10dd67eacc 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -49,15 +49,303 @@ wakeup-source; }; }; + + i2c_fmradio: i2c-gpio-8 { + compatible = "i2c-gpio"; + sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&fm_i2c_pins>; + + fmradio@10 { + compatible = "silabs,si470x"; + reg = <0x10>; + interrupt-parent = <&gpj2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&fm_irq &fm_rst>; + }; + }; +}; + +&aliases { + i2c8 = &i2c_fmradio; }; &pinctrl0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep_cfg>; + + fm_i2c_pins: fm-i2c-pins { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + fm_irq: fm-irq { + samsung,pins = "gpj2-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + fm_rst: fm-rst { + samsung,pins = "gpj2-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + massmemory_en: massmemory-en { samsung,pins = "gpj2-7"; samsung,pin-function = ; samsung,pin-pud = ; samsung,pin-drv = ; }; + + /* Based on CyanogenMod 3.0.101 kernel */ + sleep_cfg: sleep-cfg { + PIN_SLP(gpa0-0, PREV, NONE); + PIN_SLP(gpa0-1, PREV, NONE); + PIN_SLP(gpa0-2, PREV, NONE); + PIN_SLP(gpa0-3, OUT1, NONE); + PIN_SLP(gpa0-4, INPUT, DOWN); + PIN_SLP(gpa0-5, OUT0, NONE); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, OUT1, NONE); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, OUT0, NONE); + PIN_SLP(gpa1-2, INPUT, NONE); + PIN_SLP(gpa1-3, OUT0, NONE); + + PIN_SLP(gpb-0, OUT0, NONE); + PIN_SLP(gpb-1, OUT1, NONE); + PIN_SLP(gpb-2, OUT0, NONE); + PIN_SLP(gpb-3, PREV, NONE); + PIN_SLP(gpb-4, INPUT, NONE); + PIN_SLP(gpb-5, PREV, NONE); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, OUT0, NONE); + + PIN_SLP(gpc0-0, OUT0, NONE); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, OUT0, NONE); + PIN_SLP(gpc0-3, INPUT, NONE); + PIN_SLP(gpc0-4, OUT0, NONE); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, DOWN); + PIN_SLP(gpd0-3, INPUT, DOWN); + + PIN_SLP(gpd1-0, INPUT, NONE); + PIN_SLP(gpd1-1, INPUT, NONE); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + PIN_SLP(gpd1-4, INPUT, DOWN); + PIN_SLP(gpd1-5, INPUT, DOWN); + + PIN_SLP(gpe0-0, INPUT, DOWN); + PIN_SLP(gpe0-1, INPUT, DOWN); + PIN_SLP(gpe0-2, INPUT, DOWN); + PIN_SLP(gpe0-3, INPUT, DOWN); + PIN_SLP(gpe0-4, INPUT, DOWN); + PIN_SLP(gpe0-5, INPUT, DOWN); + PIN_SLP(gpe0-6, INPUT, DOWN); + PIN_SLP(gpe0-7, INPUT, DOWN); + + PIN_SLP(gpe1-0, INPUT, DOWN); + PIN_SLP(gpe1-1, INPUT, DOWN); + PIN_SLP(gpe1-2, INPUT, DOWN); + PIN_SLP(gpe1-3, OUT0, NONE); + PIN_SLP(gpe1-4, INPUT, DOWN); + + PIN_SLP(gpf0-0, OUT0, NONE); + PIN_SLP(gpf0-1, OUT0, NONE); + PIN_SLP(gpf0-2, OUT0, NONE); + PIN_SLP(gpf0-3, OUT0, NONE); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, OUT0, NONE); + PIN_SLP(gpf0-7, OUT0, NONE); + + PIN_SLP(gpf1-0, OUT0, NONE); + PIN_SLP(gpf1-1, OUT0, NONE); + PIN_SLP(gpf1-2, OUT0, NONE); + PIN_SLP(gpf1-3, OUT0, NONE); + PIN_SLP(gpf1-4, OUT0, NONE); + PIN_SLP(gpf1-5, OUT0, NONE); + PIN_SLP(gpf1-6, OUT0, NONE); + PIN_SLP(gpf1-7, OUT0, NONE); + + PIN_SLP(gpf2-0, OUT0, NONE); + PIN_SLP(gpf2-1, OUT0, NONE); + PIN_SLP(gpf2-2, OUT0, NONE); + PIN_SLP(gpf2-3, OUT0, NONE); + PIN_SLP(gpf2-4, OUT0, NONE); + PIN_SLP(gpf2-5, OUT0, NONE); + PIN_SLP(gpf2-6, OUT0, NONE); + PIN_SLP(gpf2-7, OUT0, NONE); + + PIN_SLP(gpf3-0, OUT0, NONE); + PIN_SLP(gpf3-1, OUT0, NONE); + PIN_SLP(gpf3-2, OUT0, NONE); + PIN_SLP(gpf3-3, OUT0, NONE); + PIN_SLP(gpf3-4, PREV, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpg0-0, OUT0, NONE); + PIN_SLP(gpg0-1, INPUT, NONE); + PIN_SLP(gpg0-2, INPUT, NONE); + PIN_SLP(gpg0-3, INPUT, NONE); + PIN_SLP(gpg0-4, INPUT, NONE); + PIN_SLP(gpg0-5, INPUT, NONE); + PIN_SLP(gpg0-6, INPUT, NONE); + + PIN_SLP(gpg1-0, OUT0, NONE); + PIN_SLP(gpg1-1, OUT1, NONE); + PIN_SLP(gpg1-2, PREV, NONE); + PIN_SLP(gpg1-3, OUT1, NONE); + PIN_SLP(gpg1-4, OUT1, NONE); + PIN_SLP(gpg1-5, OUT1, NONE); + PIN_SLP(gpg1-6, OUT1, NONE); + + PIN_SLP(gpg2-0, OUT0, NONE); + PIN_SLP(gpg2-1, OUT0, NONE); + PIN_SLP(gpg2-2, INPUT, NONE); + PIN_SLP(gpg2-3, OUT0, NONE); + PIN_SLP(gpg2-4, OUT0, NONE); + PIN_SLP(gpg2-5, OUT0, NONE); + PIN_SLP(gpg2-6, OUT0, NONE); + + PIN_SLP(gpg3-0, OUT1, NONE); + PIN_SLP(gpg3-1, OUT0, NONE); + PIN_SLP(gpg3-2, INPUT, NONE); + PIN_SLP(gpg3-3, INPUT, DOWN); + PIN_SLP(gpg3-4, OUT0, NONE); + PIN_SLP(gpg3-5, OUT0, NONE); + PIN_SLP(gpg3-6, INPUT, DOWN); + + PIN_SLP(gpi-0, PREV, NONE); + PIN_SLP(gpi-1, INPUT, DOWN); + PIN_SLP(gpi-2, PREV, NONE); + PIN_SLP(gpi-3, PREV, NONE); + PIN_SLP(gpi-4, PREV, NONE); + PIN_SLP(gpi-5, INPUT, DOWN); + PIN_SLP(gpi-6, INPUT, DOWN); + + PIN_SLP(gpj0-0, INPUT, NONE); + PIN_SLP(gpj0-1, INPUT, NONE); + PIN_SLP(gpj0-2, INPUT, NONE); + PIN_SLP(gpj0-3, INPUT, NONE); + PIN_SLP(gpj0-4, INPUT, NONE); + PIN_SLP(gpj0-5, INPUT, DOWN); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, INPUT, NONE); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, OUT0, NONE); + PIN_SLP(gpj1-2, INPUT, DOWN); + PIN_SLP(gpj1-3, PREV, NONE); + PIN_SLP(gpj1-4, PREV, NONE); + PIN_SLP(gpj1-5, OUT0, NONE); + + PIN_SLP(gpj2-0, INPUT, DOWN); + PIN_SLP(gpj2-1, INPUT, DOWN); + PIN_SLP(gpj2-2, OUT0, NONE); + PIN_SLP(gpj2-3, INPUT, DOWN); + PIN_SLP(gpj2-4, INPUT, UP); + PIN_SLP(gpj2-5, PREV, NONE); + PIN_SLP(gpj2-6, PREV, NONE); + PIN_SLP(gpj2-7, OUT1, NONE); + + PIN_SLP(gpj3-0, INPUT, NONE); + PIN_SLP(gpj3-1, INPUT, NONE); + PIN_SLP(gpj3-2, OUT0, NONE); + PIN_SLP(gpj3-3, INPUT, DOWN); + PIN_SLP(gpj3-4, INPUT, NONE); + PIN_SLP(gpj3-5, INPUT, NONE); + PIN_SLP(gpj3-6, INPUT, NONE); + PIN_SLP(gpj3-7, INPUT, NONE); + + PIN_SLP(gpj4-0, INPUT, NONE); + PIN_SLP(gpj4-1, INPUT, DOWN); + PIN_SLP(gpj4-2, PREV, NONE); + PIN_SLP(gpj4-3, INPUT, NONE); + PIN_SLP(gpj4-4, INPUT, DOWN); + + PIN_SLP(mp01-0, INPUT, DOWN); + PIN_SLP(mp01-1, OUT0, NONE); + PIN_SLP(mp01-2, INPUT, DOWN); + PIN_SLP(mp01-3, INPUT, DOWN); + PIN_SLP(mp01-4, OUT1, NONE); + PIN_SLP(mp01-5, INPUT, DOWN); + PIN_SLP(mp01-6, INPUT, DOWN); + PIN_SLP(mp01-7, INPUT, DOWN); + + PIN_SLP(mp02-0, INPUT, DOWN); + PIN_SLP(mp02-1, INPUT, DOWN); + PIN_SLP(mp02-2, INPUT, NONE); + PIN_SLP(mp02-3, INPUT, DOWN); + + PIN_SLP(mp03-0, INPUT, DOWN); + PIN_SLP(mp03-1, INPUT, DOWN); + PIN_SLP(mp03-2, OUT1, NONE); + PIN_SLP(mp03-3, OUT0, NONE); + PIN_SLP(mp03-4, INPUT, NONE); + PIN_SLP(mp03-5, OUT1, NONE); + PIN_SLP(mp03-6, INPUT, DOWN); + PIN_SLP(mp03-7, INPUT, DOWN); + + PIN_SLP(mp04-0, INPUT, DOWN); + PIN_SLP(mp04-1, OUT0, NONE); + PIN_SLP(mp04-2, INPUT, DOWN); + PIN_SLP(mp04-3, OUT0, NONE); + PIN_SLP(mp04-4, INPUT, DOWN); + PIN_SLP(mp04-5, INPUT, DOWN); + PIN_SLP(mp04-6, OUT0, NONE); + PIN_SLP(mp04-7, INPUT, DOWN); + + PIN_SLP(mp05-0, INPUT, NONE); + PIN_SLP(mp05-1, INPUT, NONE); + PIN_SLP(mp05-2, INPUT, NONE); + PIN_SLP(mp05-3, INPUT, NONE); + PIN_SLP(mp05-4, INPUT, DOWN); + PIN_SLP(mp05-5, OUT0, NONE); + PIN_SLP(mp05-6, INPUT, DOWN); + PIN_SLP(mp05-7, PREV, NONE); + + PIN_SLP(mp06-0, INPUT, DOWN); + PIN_SLP(mp06-1, INPUT, DOWN); + PIN_SLP(mp06-2, INPUT, DOWN); + PIN_SLP(mp06-3, INPUT, DOWN); + PIN_SLP(mp06-4, INPUT, DOWN); + PIN_SLP(mp06-5, INPUT, DOWN); + PIN_SLP(mp06-6, INPUT, DOWN); + PIN_SLP(mp06-7, INPUT, DOWN); + + PIN_SLP(mp07-0, INPUT, DOWN); + PIN_SLP(mp07-1, INPUT, DOWN); + PIN_SLP(mp07-2, INPUT, DOWN); + PIN_SLP(mp07-3, INPUT, DOWN); + PIN_SLP(mp07-4, INPUT, DOWN); + PIN_SLP(mp07-5, INPUT, DOWN); + PIN_SLP(mp07-6, INPUT, DOWN); + PIN_SLP(mp07-7, INPUT, DOWN); + }; }; &sdhci0 { @@ -67,4 +355,8 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; pinctrl-names = "default"; status = "okay"; + + assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>; + assigned-clock-rates = <0>, <52000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; }; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 7f0c9d447871..5e8b66281f01 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -18,6 +18,13 @@ #include +#define PIN_SLP(_pin, _mode, _pull) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-con-pdn = ; \ + samsung,pin-pud-pdn = ; \ + } + &pinctrl0 { gpa0: gpa0 { gpio-controller; @@ -195,7 +202,7 @@ #interrupt-cells = <2>; }; - gpgi: gpgi { + gpi: gpi { gpio-controller; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 2ad642f51fd9..1b0ee884e91d 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -159,6 +159,18 @@ }; }; + adc: adc@e1700000 { + compatible = "samsung,s5pv210-adc"; + reg = <0xe1700000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <23>, <24>; + clocks = <&clocks CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + spi0: spi@e1300000 { compatible = "samsung,s5pv210-spi"; reg = <0xe1300000 0x1000>; @@ -614,7 +626,7 @@ clock-names = "fimc", "sclk_fimc"; samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; + samsung,min-pix-alignment = <16 8>; samsung,cam-if; }; @@ -628,8 +640,10 @@ clock-names = "fimc", "sclk_fimc"; samsung,pix-limits = <4224 8192 1920 4224>; + samsung,min-pix-alignment = <1 1>; samsung,mainscaler-ext; samsung,cam-if; + samsung,lcd-wb; }; fimc2: fimc@fb400000 { @@ -641,9 +655,10 @@ <&clocks SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,lcd-wb; + samsung,pix-limits = <1920 8192 1280 1920>; + samsung,min-pix-alignment = <16 8>; + samsung,rotators = <0>; + samsung,cam-if; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index ab550d69db91..c0a3ca8f9bf7 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -21,10 +21,6 @@ aliases { serial0 = &uart1; serial1 = &uart3; - tcb0 = &tcb0; - tcb1 = &tcb1; - i2s0 = &i2s0; - i2s1 = &i2s1; }; cpus { @@ -635,6 +631,64 @@ #size-cells = <1>; ranges = <0x0 0xf8034000 0x800>; status = "disabled"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; flx1: flexcom@f8038000 { @@ -645,6 +699,64 @@ #size-cells = <1>; ranges = <0x0 0xf8038000 0x800>; status = "disabled"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; securam: sram@f8044000 { @@ -794,6 +906,64 @@ #size-cells = <1>; ranges = <0x0 0xfc010000 0x800>; status = "disabled"; + + uart7: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; flx3: flexcom@fc014000 { @@ -804,6 +974,65 @@ #size-cells = <1>; ranges = <0x0 0xfc014000 0x800>; status = "disabled"; + + uart8: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c5: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; flx4: flexcom@fc018000 { @@ -814,6 +1043,64 @@ #size-cells = <1>; ranges = <0x0 0xfc018000 0x800>; status = "disabled"; + + uart9: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi6: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; trng@fc01c000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index f11b018e9173..c53e48445e4d 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -108,7 +108,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "mci_clk"; }; @@ -123,7 +123,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "spi_clk"; status = "disabled"; }; @@ -137,7 +137,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "pclk"; status = "disabled"; }; @@ -148,7 +148,7 @@ #size-cells = <0>; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -163,10 +163,10 @@ pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; status = "disabled"; }; @@ -181,10 +181,10 @@ pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; @@ -197,7 +197,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "usart"; status = "disabled"; }; @@ -211,7 +211,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; status = "disabled"; }; @@ -222,7 +222,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -232,7 +232,7 @@ reg = <0xf002c000 0x300>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; status = "disabled"; }; @@ -242,7 +242,7 @@ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "isi_clk"; status = "disabled"; port { @@ -267,7 +267,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "mci_clk"; }; @@ -282,7 +282,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "spi_clk"; status = "disabled"; }; @@ -296,7 +296,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "pclk"; status = "disabled"; }; @@ -323,7 +323,7 @@ &pinctrl_adc0_ad10 &pinctrl_adc0_ad11 >; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xfff>; @@ -367,10 +367,10 @@ pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; status = "disabled"; }; @@ -383,7 +383,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "usart"; status = "disabled"; }; @@ -397,7 +397,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; status = "disabled"; }; @@ -408,7 +408,7 @@ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "sha_clk"; }; @@ -419,7 +419,7 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "aes_clk"; }; @@ -430,7 +430,7 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; clock-names = "tdes_clk"; }; @@ -438,14 +438,14 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xf8040000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; }; hsmc: hsmc@ffffc000 { compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xffffc000 0x1000>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -462,7 +462,7 @@ reg = <0xffffe600 0x200>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "dma_clk"; }; @@ -471,14 +471,14 @@ reg = <0xffffe800 0x200>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "dma_clk"; }; ramc0: ramc@ffffea00 { compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; @@ -491,7 +491,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&dbgu_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; clock-names = "usart"; status = "disabled"; }; @@ -967,7 +967,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; pioB: gpio@fffff400 { @@ -978,7 +978,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; }; pioC: gpio@fffff600 { @@ -989,7 +989,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; }; pioD: gpio@fffff800 { @@ -1000,7 +1000,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; }; pioE: gpio@fffffa00 { @@ -1011,7 +1011,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; }; }; @@ -1019,353 +1019,9 @@ compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = ; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = ; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = ; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = ; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <8000000 50000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = ; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = ; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 166000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = ; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = ; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = ; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dbgu_clk: dbgu_clk { - #clock-cells = <0>; - reg = <2>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <5>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <6>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <7>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <8>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <9>; - }; - - pioE_clk: pioE_clk { - #clock-cells = <0>; - reg = <10>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <12>; - atmel,clk-output-range = <0 83000000>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <13>; - atmel,clk-output-range = <0 83000000>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <14>; - atmel,clk-output-range = <0 83000000>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <15>; - atmel,clk-output-range = <0 83000000>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <16>; - atmel,clk-output-range = <0 83000000>; - }; - - twi0_clk: twi0_clk { - reg = <18>; - #clock-cells = <0>; - atmel,clk-output-range = <0 41500000>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <19>; - atmel,clk-output-range = <0 41500000>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <20>; - atmel,clk-output-range = <0 41500000>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <22>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <24>; - atmel,clk-output-range = <0 166000000>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <25>; - atmel,clk-output-range = <0 166000000>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <26>; - atmel,clk-output-range = <0 166000000>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <28>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <29>; - atmel,clk-output-range = <0 83000000>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <30>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <31>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <32>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <33>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <37>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <39>; - atmel,clk-output-range = <0 83000000>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <42>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <43>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <44>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <45>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <48>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <49>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; reset_controller: rstc@fffffe00 { @@ -1384,7 +1040,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; watchdog: watchdog@fffffe40 { @@ -1426,7 +1082,7 @@ reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -1540,7 +1196,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1549,7 +1205,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1565,7 +1221,7 @@ 0x1 0x0 0x40000000 0x10000000 0x2 0x0 0x50000000 0x10000000 0x3 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index 2470dd3fff25..9ac29bf3f933 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -31,29 +31,13 @@ }; - pmc: pmc@fffffc00 { - periphck { - can0_clk: can0_clk { - #clock-cells = <0>; - reg = <40>; - atmel,clk-output-range = <0 83000000>; - }; - - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <41>; - atmel,clk-output-range = <0 83000000>; - }; - }; - }; - can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; - clocks = <&can0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; clock-names = "can_clk"; status = "disabled"; }; @@ -64,7 +48,7 @@ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; - clocks = <&can1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "can_clk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 9aef414bcd2e..45226108850d 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -31,12 +31,6 @@ }; pmc: pmc@fffffc00 { - periphck { - macb1_clk: macb1_clk { - #clock-cells = <0>; - reg = <35>; - }; - }; }; macb1: ethernet@f802c000 { @@ -45,7 +39,7 @@ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; - clocks = <&macb1_clk>, <&macb1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index 3667765a138b..884df7a54dbb 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -63,22 +63,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <34>; - }; - }; - }; - macb0: ethernet@f0028000 { compatible = "atmel,sama5d3-gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index 2cf046cd4e99..308d2fc276d6 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -16,7 +16,7 @@ compatible = "atmel,sama5d3-hlcdc"; reg = <0xf0030000 0x2000>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -192,23 +192,6 @@ }; }; }; - - pmc: pmc@fffffc00 { - periphck { - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <36>; - }; - }; - - systemck { - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 3c83c1c36ac8..7141ee97ec3e 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -30,15 +30,6 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - mci2_clk: mci2_clk { - #clock-cells = <0>; - reg = <23>; - }; - }; - }; - mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; @@ -47,7 +38,7 @@ dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; - clocks = <&mci2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "mci_clk"; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 215802b8db30..2b18c5c2cc03 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -17,23 +17,13 @@ ahb { apb { - pmc: pmc@fffffc00 { - periphck { - tcb1_clk: tcb1_clk { - #clock-cells = <0>; - reg = <27>; - atmel,clk-output-range = <0 166000000>; - }; - }; - }; - tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf8014000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; }; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index cb62adbd28ed..a3eaba995cf4 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -36,29 +36,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <16>; - atmel,clk-output-range = <0 83000000>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <17>; - atmel,clk-output-range = <0 83000000>; - }; - }; - }; - uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -69,7 +53,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "usart"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 35031bbc7e70..a499de8a7a64 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -46,7 +46,7 @@ wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "mclk"; }; }; @@ -60,9 +60,9 @@ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; /* use pck1 for the master clock of ov2640 */ - clocks = <&pck1>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; clock-names = "xvclk"; - assigned-clocks = <&pck1>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; assigned-clock-rates = <25000000>; port { diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 8a6916a69da4..fa9e5e2a745d 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -45,7 +45,7 @@ wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "mclk"; }; }; @@ -59,9 +59,9 @@ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; /* use pck1 for the master clock of ov2640 */ - clocks = <&pck1>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; clock-names = "xvclk"; - assigned-clocks = <&pck1>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; assigned-clock-rates = <25000000>; port { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index c9c0316b5b0e..fff679734c9c 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -462,7 +462,7 @@ pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; @@ -484,7 +484,7 @@ pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; @@ -529,7 +529,7 @@ pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c134154bcce8..01fd06328420 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -99,7 +99,7 @@ }; cmt1: timer@e6138000 { - compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; + compatible = "renesas,sh73a0-cmt1"; reg = <0xe6138000 0x200>; interrupts = ; clocks = <&mstp3_clks SH73A0_CLK_CMT1>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4f3993cc0227..c2b54af417a2 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -531,6 +531,7 @@ reg = <0xff400000 0x100000>; resets = <&rst LWHPS2FPGA_RESET>; clocks = <&l4_main_clk>; + status = "disabled"; }; fpga_bridge1: fpga_bridge@ff500000 { @@ -538,6 +539,21 @@ reg = <0xff500000 0x10000>; resets = <&rst HPS2FPGA_RESET>; clocks = <&l4_main_clk>; + status = "disabled"; + }; + + fpga_bridge2: fpga-bridge@ff600000 { + compatible = "altr,socfpga-fpga2hps-bridge"; + reg = <0xff600000 0x100000>; + resets = <&rst FPGA2HPS_RESET>; + clocks = <&l4_main_clk>; + status = "disabled"; + }; + + fpga_bridge3: fpga-bridge@ffc25080 { + compatible = "altr,socfpga-fpga2sdram-bridge"; + reg = <0xffc25080 0x4>; + status = "disabled"; }; fpgamgr0: fpgamgr@ff706000 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 313f0ab16866..5b499c0b2745 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -24,6 +24,26 @@ stdout-path = &serial2; }; + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&ab8500_ldo_aux8_reg>; + }; + }; + soc { /* External Micro SD card slot */ sdi0_per1@80126000 { @@ -146,6 +166,32 @@ pinctrl-1 = <&u2rxtx_c_1_sleep>; }; + i2c@80004000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + compatible = "sharp,gp2ap002s00f"; + reg = <0x44>; + + /* GPIO146 (PS_INT) */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux8_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&proximity_default>; + + sharp,proximity-far-hysteresis = <0x40>; + sharp,proximity-close-hysteresis = <0x0f>; + }; + }; + i2c@80128000 { status = "okay"; @@ -357,6 +403,16 @@ }; }; + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + golden_cfg1 { + pins = "GPIO151", /* COMP_SCL */ + "GPIO152"; /* COMP_SDA */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + sdi0 { sd_level_translator_default: sd_level_translator_default { golden_cfg1 { @@ -375,6 +431,15 @@ }; }; + proximity { + proximity_default: proximity_default { + golden_cfg1 { + pins = "GPIO146_D13"; /* PS_INT */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + imu { imu_default: imu_default { golden_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 292ed5286652..8edef161613a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -140,7 +140,12 @@ pinctrl-0 = <&i2c_gpio_1_default>; #address-cells = <1>; #size-cells = <0>; - /* TODO: this should be used by the ALPS HSCDTD008A compass sensor */ + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&ab8500_ldo_aux8_reg>; + }; }; soc { @@ -362,7 +367,28 @@ pinctrl-0 = <&i2c3_c_2_default>; pinctrl-1 = <&i2c3_c_2_sleep>; - /* TODO: this should be used by the Cypress TMA140 touchscreen */ + /* Cypress CY8CTMA140 touchscreen */ + touchscreen@20 { + compatible = "cypress,cy8ctma140"; + clock-frequency = <400000>; + reg = <0x20>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + touchscreen-max-pressure = <255>; + + /* GPIO218 for IRQ */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + /* VDD is "digital supply" nominally 1.71-3.6V */ + vdd-supply = <&ab8500_ldo_aux2_reg>; + /* VCPIN is "analog supply", 2.7-3.6 V */ + vcpin-supply = <&ab8500_ldo_aux2_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&tma140_skomer_default>; + }; }; mcde@a0350000 { @@ -557,6 +583,15 @@ }; }; }; + /* Interrupt line for the Cypress TMA140 touchscreen */ + touchscreen { + tma140_skomer_default: tma140_skomer { + skomer_cfg1 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; }; &ab8505_gpio { diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 7c36c37260a4..23a1746f3baa 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -767,20 +767,6 @@ <&clk_s_c0_flexgen CLK_ETH_PHY>; }; - rng10: rng@8a89000 { - compatible = "st,rng"; - reg = <0x08a89000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; - }; - - rng11: rng@8a8a000 { - compatible = "st,rng"; - reg = <0x08a8a000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; - }; - mailbox0: mailbox@8f00000 { compatible = "st,stih407-mailbox"; reg = <0x8f00000 0x1000>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 83411322bd92..a05e2278b448 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -50,7 +50,7 @@ ohci0: usb@9a03c00 { compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; - interrupts = ; + interrupts = ; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; @@ -62,7 +62,7 @@ ehci0: usb@9a03e00 { compatible = "st,st-ehci-300x"; reg = <0x9a03e00 0x100>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; @@ -76,7 +76,7 @@ ohci1: usb@9a83c00 { compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; - interrupts = ; + interrupts = ; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; @@ -88,7 +88,7 @@ ehci1: usb@9a83e00 { compatible = "st,st-ehci-300x"; reg = <0x9a83e00 0x100>; - interrupts = ; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index d7770699feb5..393f43c85a3c 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -414,14 +414,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 05eb02e6d083..9b7fc68380e9 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -180,14 +180,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 73c07f0dfad2..7eb858732d6d 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -6,7 +6,7 @@ #include &pinctrl { - adc1_in6_pins_a: adc1-in6 { + adc1_in6_pins_a: adc1-in6-0 { pins { pinmux = ; }; @@ -21,6 +21,13 @@ }; }; + adc12_ain_pins_b: adc12-ain-1 { + pins { + pinmux = , /* ADC1 in6 */ + ; /* ADC2 in2 */ + }; + }; + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { pins { pinmux = , /* ADC12 in18 */ @@ -37,7 +44,7 @@ }; }; - cec_pins_sleep_a: cec-sleep-0 { + cec_sleep_pins_a: cec-sleep-0 { pins { pinmux = ; /* HDMI_CEC */ }; @@ -52,19 +59,19 @@ }; }; - cec_pins_sleep_b: cec-sleep-1 { + cec_sleep_pins_b: cec-sleep-1 { pins { pinmux = ; /* HDMI_CEC */ }; }; - dac_ch1_pins_a: dac-ch1 { + dac_ch1_pins_a: dac-ch1-0 { pins { pinmux = ; }; }; - dac_ch2_pins_a: dac-ch2 { + dac_ch2_pins_a: dac-ch2-0 { pins { pinmux = ; }; @@ -142,7 +149,7 @@ }; }; - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 { pins1 { pinmux = , /* ETH_RGMII_CLK125 */ , /* ETH_RGMII_GTX_CLK */ @@ -162,6 +169,108 @@ }; }; + ethernet0_rgmii_pins_b: rgmii-1 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDC */ + , /* ETH_MDIO */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + + ethernet0_rgmii_pins_c: rgmii-2 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + ethernet0_rmii_pins_a: rmii-0 { pins1 { pinmux = , /* ETH1_RMII_TXD0 */ @@ -182,7 +291,7 @@ }; }; - ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + ethernet0_rmii_sleep_pins_a: rmii-sleep-0 { pins1 { pinmux = , /* ETH1_RMII_TXD0 */ , /* ETH1_RMII_TXD1 */ @@ -250,14 +359,14 @@ }; }; - i2c1_pins_sleep_a: i2c1-1 { + i2c1_sleep_pins_a: i2c1-sleep-0 { pins { pinmux = , /* I2C1_SCL */ ; /* I2C1_SDA */ }; }; - i2c1_pins_b: i2c1-2 { + i2c1_pins_b: i2c1-1 { pins { pinmux = , /* I2C1_SCL */ ; /* I2C1_SDA */ @@ -267,7 +376,7 @@ }; }; - i2c1_pins_sleep_b: i2c1-3 { + i2c1_sleep_pins_b: i2c1-sleep-1 { pins { pinmux = , /* I2C1_SCL */ ; /* I2C1_SDA */ @@ -284,14 +393,14 @@ }; }; - i2c2_pins_sleep_a: i2c2-1 { + i2c2_sleep_pins_a: i2c2-sleep-0 { pins { pinmux = , /* I2C2_SCL */ ; /* I2C2_SDA */ }; }; - i2c2_pins_b1: i2c2-2 { + i2c2_pins_b1: i2c2-1 { pins { pinmux = ; /* I2C2_SDA */ bias-disable; @@ -300,12 +409,29 @@ }; }; - i2c2_pins_sleep_b1: i2c2-3 { + i2c2_sleep_pins_b1: i2c2-sleep-1 { pins { pinmux = ; /* I2C2_SDA */ }; }; + i2c2_pins_c: i2c2-2 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_c: i2c2-sleep-2 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = , /* I2C5_SCL */ @@ -316,7 +442,7 @@ }; }; - i2c5_pins_sleep_a: i2c5-1 { + i2c5_sleep_pins_a: i2c5-sleep-0 { pins { pinmux = , /* I2C5_SCL */ ; /* I2C5_SDA */ @@ -324,6 +450,23 @@ }; }; + i2c5_pins_b: i2c5-1 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_sleep_pins_b: i2c5-sleep-1 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + }; + }; + i2s2_pins_a: i2s2-0 { pins { pinmux = , /* I2S2_SDO */ @@ -335,7 +478,7 @@ }; }; - i2s2_pins_sleep_a: i2s2-1 { + i2s2_sleep_pins_a: i2s2-sleep-0 { pins { pinmux = , /* I2S2_SDO */ , /* I2S2_WS */ @@ -343,7 +486,7 @@ }; }; - ltdc_pins_a: ltdc-a-0 { + ltdc_pins_a: ltdc-0 { pins { pinmux = , /* LCD_CLK */ , /* LCD_HSYNC */ @@ -379,7 +522,7 @@ }; }; - ltdc_pins_sleep_a: ltdc-a-1 { + ltdc_sleep_pins_a: ltdc-sleep-0 { pins { pinmux = , /* LCD_CLK */ , /* LCD_HSYNC */ @@ -412,7 +555,7 @@ }; }; - ltdc_pins_b: ltdc-b-0 { + ltdc_pins_b: ltdc-1 { pins { pinmux = , /* LCD_CLK */ , /* LCD_HSYNC */ @@ -448,7 +591,7 @@ }; }; - ltdc_pins_sleep_b: ltdc-b-1 { + ltdc_sleep_pins_b: ltdc-sleep-1 { pins { pinmux = , /* LCD_CLK */ , /* LCD_HSYNC */ @@ -481,6 +624,142 @@ }; }; + ltdc_pins_c: ltdc-2 { + pins1 { + pinmux = , /* LTDC_R6 */ + , /* LTDC_B7 */ + , /* LTDC_R5 */ + , /* LTDC_G7 */ + , /* LTDC_B2 */ + , /* LTDC_B3 */ + , /* LTDC_G3 */ + , /* LTDC_B4 */ + , /* LTDC_DE */ + , /* LTDC_R7 */ + , /* LTDC_G5 */ + , /* LTDC_R2 */ + , /* LTDC_R3 */ + , /* LTDC_R4 */ + , /* LTDC_G2 */ + , /* LTDC_G4 */ + , /* LTDC_G6 */ + , /* LTDC_B5 */ + , /* LTDC_B6 */ + , /* LTDC_VSYNC */ + ; /* LTDC_HSYNC */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* LTDC_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_sleep_pins_c: ltdc-sleep-2 { + pins1 { + pinmux = , /* LTDC_R6 */ + , /* LTDC_B7 */ + , /* LTDC_R5 */ + , /* LTDC_G7 */ + , /* LTDC_B2 */ + , /* LTDC_B3 */ + , /* LTDC_G3 */ + , /* LTDC_B4 */ + , /* LTDC_DE */ + , /* LTDC_R7 */ + , /* LTDC_G5 */ + , /* LTDC_R2 */ + , /* LTDC_R3 */ + , /* LTDC_R4 */ + , /* LTDC_G2 */ + , /* LTDC_G4 */ + , /* LTDC_G6 */ + , /* LTDC_B5 */ + , /* LTDC_B6 */ + , /* LTDC_VSYNC */ + , /* LTDC_HSYNC */ + ; /* LTDC_CLK */ + }; + }; + + ltdc_pins_d: ltdc-3 { + pins1 { + pinmux = ; /* LCD_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ltdc_sleep_pins_d: ltdc-sleep-3 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = ; /* CAN1_TX */ @@ -501,6 +780,46 @@ }; }; + m_can1_pins_b: m-can1-1 { + pins1 { + pinmux = ; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_b: m_can1-sleep-1 { + pins { + pinmux = , /* CAN1_TX */ + ; /* CAN1_RX */ + }; + }; + + m_can2_pins_a: m-can2-0 { + pins1 { + pinmux = ; /* CAN2_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* CAN2_RX */ + bias-disable; + }; + }; + + m_can2_sleep_pins_a: m_can2-sleep-0 { + pins { + pinmux = , /* CAN2_TX */ + ; /* CAN2_RX */ + }; + }; + pwm1_pins_a: pwm1-0 { pins { pinmux = , /* TIM1_CH1 */ @@ -550,6 +869,21 @@ }; }; + pwm3_pins_b: pwm3-1 { + pins { + pinmux = ; /* TIM3_CH2 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_b: pwm3-sleep-1 { + pins { + pinmux = ; /* TIM3_CH2 */ + }; + }; + pwm4_pins_a: pwm4-0 { pins { pinmux = , /* TIM4_CH3 */ @@ -597,6 +931,25 @@ }; }; + pwm5_pins_b: pwm5-1 { + pins { + pinmux = , /* TIM5_CH2 */ + , /* TIM5_CH3 */ + ; /* TIM5_CH4 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_b: pwm5-sleep-1 { + pins { + pinmux = , /* TIM5_CH2 */ + , /* TIM5_CH3 */ + ; /* TIM5_CH4 */ + }; + }; + pwm8_pins_a: pwm8-0 { pins { pinmux = ; /* TIM8_CH4 */ @@ -710,7 +1063,7 @@ }; }; - sai2a_sleep_pins_a: sai2a-1 { + sai2a_sleep_pins_a: sai2a-sleep-0 { pins { pinmux = , /* SAI2_SCK_A */ , /* SAI2_SD_A */ @@ -720,7 +1073,7 @@ }; - sai2a_pins_b: sai2a-2 { + sai2a_pins_b: sai2a-1 { pins1 { pinmux = , /* SAI2_SD_A */ , /* SAI2_FS_A */ @@ -731,7 +1084,7 @@ }; }; - sai2a_sleep_pins_b: sai2a-sleep-3 { + sai2a_sleep_pins_b: sai2a-sleep-1 { pins { pinmux = , /* SAI2_SD_A */ , /* SAI2_FS_A */ @@ -739,6 +1092,25 @@ }; }; + sai2a_pins_c: sai2a-4 { + pins { + pinmux = , /* SAI2_SCK_A */ + , /* SAI2_SD_A */ + ; /* SAI2_FS_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_c: sai2a-5 { + pins { + pinmux = , /* SAI2_SCK_A */ + , /* SAI2_SD_A */ + ; /* SAI2_FS_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = , /* SAI2_SCK_B */ @@ -754,7 +1126,7 @@ }; }; - sai2b_sleep_pins_a: sai2b-1 { + sai2b_sleep_pins_a: sai2b-sleep-0 { pins { pinmux = , /* SAI2_SD_B */ , /* SAI2_SCK_B */ @@ -763,14 +1135,27 @@ }; }; - sai2b_pins_b: sai2b-2 { + sai2b_pins_b: sai2b-1 { pins { pinmux = ; /* SAI2_SD_B */ bias-disable; }; }; - sai2b_sleep_pins_b: sai2b-3 { + sai2b_sleep_pins_b: sai2b-sleep-1 { + pins { + pinmux = ; /* SAI2_SD_B */ + }; + }; + + sai2b_pins_c: sai2a-4 { + pins1 { + pinmux = ; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_c: sai2a-sleep-5 { pins { pinmux = ; /* SAI2_SD_B */ }; @@ -785,7 +1170,7 @@ }; }; - sai4a_sleep_pins_a: sai4a-1 { + sai4a_sleep_pins_a: sai4a-sleep-0 { pins { pinmux = ; /* SAI4_SD_A */ }; @@ -869,6 +1254,30 @@ }; }; + sdmmc1_dir_pins_b: sdmmc1-dir-1 { + pins1 { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + ; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = ; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 { + pins { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + , /* SDMMC1_CDIR */ + ; /* SDMMC1_CKIN */ + }; + }; + sdmmc2_b4_pins_a: sdmmc2-b4-0 { pins1 { pinmux = , /* SDMMC2_D0 */ @@ -987,6 +1396,48 @@ }; }; + sdmmc2_d47_pins_b: sdmmc2-d47-1 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_pins_c: sdmmc2-d47-2 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = , /* SDMMC3_D0 */ @@ -1041,6 +1492,60 @@ }; }; + sdmmc3_b4_pins_b: sdmmc3-b4-1 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + ; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + ; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 { + pins { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + , /* SDMMC3_CK */ + ; /* SDMMC3_CMD */ + }; + }; + spdifrx_pins_a: spdifrx-0 { pins { pinmux = ; /* SPDIF_IN1 */ @@ -1048,12 +1553,75 @@ }; }; - spdifrx_sleep_pins_a: spdifrx-1 { + spdifrx_sleep_pins_a: spdifrx-sleep-0 { pins { pinmux = ; /* SPDIF_IN1 */ }; }; + spi2_pins_a: spi2-0 { + pins1 { + pinmux = , /* SPI1_SCK */ + ; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI1_MISO */ + bias-disable; + }; + }; + + usart2_pins_a: usart2-0 { + pins1 { + pinmux = , /* USART2_TX */ + ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + }; + }; + + usart2_pins_b: usart2-1 { + pins1 { + pinmux = , /* USART2_TX */ + ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + }; + }; + usart3_pins_a: usart3-0 { pins1 { pinmux = ; /* USART3_TX */ @@ -1093,6 +1661,19 @@ }; }; + uart4_pins_c: uart4-2 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = ; /* UART4_TX */ @@ -1108,6 +1689,19 @@ }; }; + uart7_pins_b: uart7-1 { + pins1 { + pinmux = ; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-disable; + }; + }; + uart8_pins_a: uart8-0 { pins1 { pinmux = ; /* UART8_TX */ @@ -1145,7 +1739,7 @@ }; }; - i2c2_pins_sleep_b2: i2c2-1 { + i2c2_sleep_pins_b2: i2c2-sleep-0 { pins { pinmux = ; /* I2C2_SCL */ }; @@ -1161,7 +1755,7 @@ }; }; - i2c4_pins_sleep_a: i2c4-1 { + i2c4_sleep_pins_a: i2c4-sleep-0 { pins { pinmux = , /* I2C4_SCL */ ; /* I2C4_SDA */ @@ -1182,4 +1776,18 @@ bias-disable; }; }; + + spi4_pins_a: spi4-0 { + pins { + pinmux = , /* SPI4_SCK */ + ; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* SPI4_MISO */ + bias-disable; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3ea05ba48215..36f38a95b4de 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -24,10 +24,8 @@ }; psci { - compatible = "arm,psci"; + compatible = "arm,psci-1.0"; method = "smc"; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; }; intc: interrupt-controller@a0021000 { @@ -475,7 +473,7 @@ }; i2c1: i2c@40012000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40012000 0x400>; interrupt-names = "event", "error"; interrupts = , @@ -484,12 +482,13 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; status = "disabled"; }; i2c2: i2c@40013000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40013000 0x400>; interrupt-names = "event", "error"; interrupts = , @@ -498,12 +497,13 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; status = "disabled"; }; i2c3: i2c@40014000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40014000 0x400>; interrupt-names = "event", "error"; interrupts = , @@ -512,12 +512,13 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; status = "disabled"; }; i2c5: i2c@40015000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40015000 0x400>; interrupt-names = "event", "error"; interrupts = , @@ -526,6 +527,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; status = "disabled"; }; @@ -550,14 +552,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; @@ -1124,6 +1126,11 @@ }; }; + pwr_mcu: pwr_mcu@50001014 { + compatible = "syscon"; + reg = <0x50001014 0x4>; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp1-exti", "syscon"; interrupt-controller; @@ -1423,6 +1430,11 @@ clock-names = "lcd"; resets = <&rcc LTDC_R>; status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + }; }; iwdg2: watchdog@5a002000 { @@ -1476,7 +1488,7 @@ }; i2c4: i2c@5c002000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x5c002000 0x400>; interrupt-names = "event", "error"; interrupts = , @@ -1485,6 +1497,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; status = "disabled"; }; @@ -1512,7 +1525,7 @@ }; i2c6: i2c@5c009000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x5c009000 0x400>; interrupt-names = "event", "error"; interrupts = , @@ -1521,6 +1534,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; status = "disabled"; }; @@ -1700,6 +1714,7 @@ resets = <&rcc MCU_R>; st,syscfg-holdboot = <&rcc 0x10C 0x1>; st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi index 3f0a4a91cce6..54e73ccea446 100644 --- a/arch/arm/boot/dts/stm32mp157.dtsi +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -15,7 +15,6 @@ clocks = <&rcc GPU>, <&rcc GPU_K>; clock-names = "bus" ,"core"; resets = <&rcc GPU_R>; - status = "disabled"; }; dsi: dsi@5a000000 { @@ -25,7 +24,14 @@ clock-names = "pclk", "ref", "px_clk"; resets = <&rcc DSI_R>; reset-names = "apb"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 425175f7d83c..8a6eaca994d1 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -2,318 +2,10 @@ /* * Copyright (C) Linaro Ltd 2019 - All Rights Reserved * Author: Manivannan Sadhasivam + * Copyright (C) 2020 Marek Vasut */ /dts-v1/; -#include "stm32mp157.dtsi" -#include "stm32mp15-pinctrl.dtsi" -#include "stm32mp15xxac-pinctrl.dtsi" -#include -#include - -/ { - model = "Arrow Electronics STM32MP157A Avenger96 board"; - compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; - - aliases { - ethernet0 = ðernet0; - mmc0 = &sdmmc1; - serial0 = &uart4; - serial1 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x40000000>; - }; - - led { - compatible = "gpio-leds"; - led1 { - label = "green:user1"; - gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led2 { - label = "green:user2"; - gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led3 { - label = "green:user3"; - gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led4 { - label = "green:user3"; - gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - default-state = "off"; - panic-indicator; - }; - - led5 { - label = "yellow:wifi"; - gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led6 { - label = "blue:bt"; - gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@7 { - reg = <7>; - }; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_b>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - - ldo1-supply = <&v3v3>; - ldo2-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo5-supply = <&v3v3>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - vdda: ldo1 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = ; - interrupt-parent = <&pmic>; - }; - - v2v8: ldo2 { - regulator-name = "v2v8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - interrupts = ; - interrupt-parent = <&pmic>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - interrupts = ; - interrupt-parent = <&pmic>; - }; - - vdd_sd: ldo5 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = ; - interrupt-parent = <&pmic>; - regulator-boot-on; - }; - - v1v8: ldo6 { - regulator-name = "v1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - interrupts = ; - interrupt-parent = <&pmic>; - regulator-enable-ramp-delay = <300000>; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = ; - interrupt-parent = <&pmic>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = ; - interrupt-parent = <&pmic>; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = ; - interrupt-parent = <&pmic>; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = , ; - interrupt-names = "onkey-falling", "onkey-rising"; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - disable-wp; - st,sig-dir; - st,neg-edge; - st,use-ckin; - bus-width = <4>; - vmmc-supply = <&vdd_sd>; - status = "okay"; -}; - -&uart4 { - /* On Low speed expansion header */ - label = "LS-UART1"; - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_b>; - status = "okay"; -}; - -&uart7 { - /* On Low speed expansion header */ - label = "LS-UART0"; - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; -}; +/* This DT is here only for backward compatibility */ +#include "stm32mp157a-dhcor-avenger96.dts" diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts new file mode 100644 index 000000000000..2e3c9fbb4eb3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam + * Copyright (C) 2020 Marek Vasut + * + * DHCOR STM32MP1 variant: + * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG + * DHCOR PCB number: 586-100 or newer + * Avenger96 PCB number: 588-200 or newer + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcor-som.dtsi" +#include "stm32mp15xx-dhcor-avenger96.dtsi" + +/ { + model = "Arrow Electronics STM32MP157A Avenger96 board"; + compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som", + "st,stm32mp157"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_b>; + pinctrl-1 = <&m_can1_sleep_pins_b>; + status = "disabled"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts new file mode 100644 index 000000000000..70f394b4d3c0 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Manivannan Sadhasivam + */ + +/dts-v1/; +#include "stm32mp157a-stinger96.dtsi" + +/ { + model = "Shiratech STM32MP157A IoT Box"; + compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157"; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&i2c2 { + ccs811@5b { + compatible = "ams,ccs811"; + reg = <0x5b>; + wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + }; +}; + +/* WiFi */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <1>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* Bluetooth */ +&uart4 { + /* Note: HW flow control is broken, hence using custom CTS/RTS gpios */ + /delete-property/st,hw-flow-ctrl; + cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + shutdown-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + compatible = "brcm,bcm43438-bt"; + max-speed = <115200>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dts b/arch/arm/boot/dts/stm32mp157a-stinger96.dts new file mode 100644 index 000000000000..249a53877512 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Manivannan Sadhasivam + */ + +/dts-v1/; +#include "stm32mp157a-stinger96.dtsi" + +/ { + model = "Shiratech STM32MP157A Stinger96 board"; + compatible = "shiratech,stm32mp157a-stinger96", "st,stm32mp157"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi new file mode 100644 index 000000000000..58275bcf9e26 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -0,0 +1,342 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include +#include + +/ { + aliases { + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + serial2 = &usart2; + spi0 = &spi4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x10000000>; + }; + + led { + compatible = "gpio-leds"; + + led1 { + label = "green:user1"; + gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpioh 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpioh 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user4"; + gpios = <&gpiof 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + regulator-always-on; + + gpios = <&gpioa 8 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; +}; + +/* Only headless mode is supported */ +&gpu { + status = "disabled"; +}; + +/* LS-I2C0 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <1000>; + i2c-scl-falling-time-ns = <300>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + }; + + v2v9: ldo2 { + regulator-name = "v2v9"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; + broken-cd; + disable-wp; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + +/* LS-SPI0 */ +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins_a>; + cs-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* BG96 */ +&usart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart2_pins_b>; + pinctrl-1 = <&usart2_sleep_pins_b>; + st,hw-flow-ctrl; + status = "okay"; +}; + +/* LS-UART0 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_c>; + st,hw-flow-ctrl; + status = "okay"; +}; + +/* Debug console */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_b>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts index af99e132e1b1..197aa98d49e2 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -1,160 +1,23 @@ // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* - * Copyright (C) 2019 Marek Vasut + * Copyright (C) 2019-2020 Marek Vasut + * + * DHCOM STM32MP1 variant: + * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2 + * DHCOR PCB number: 587-200 or newer + * PDK2 PCB number: 516-400 or newer */ +/dts-v1/; -#include "stm32mp157c-dhcom-som.dtsi" -#include +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-pdk2.dtsi" / { - model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)"; - compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157"; - - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - ethernet0 = ðernet0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clk_ext_audio_codec: clock-codec { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - display_bl: display-bl { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; - default-brightness-level = <8>; - enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; - - panel { - compatible = "edt,etm0700g0edh6"; - backlight = <&display_bl>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - - sound { - compatible = "audio-graph-card"; - routing = - "MIC_IN", "Capture", - "Capture", "Mic Bias", - "Playback", "HP_OUT"; - dais = <&sai2a_port &sai2b_port>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default"; - pinctrl-0 = <&cec_pins_a>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - -&i2c5 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - clocks = <&clk_ext_audio_codec>; - VDDA-supply = <&v3v3>; - VDDIO-supply = <&vdd>; - - sgtl5000_port: port { - #address-cells = <1>; - #size-cells = <0>; - - sgtl5000_tx_endpoint: endpoint@0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - sgtl5000_rx_endpoint: endpoint@1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - - }; - - polytouch@38 { - compatible = "edt,edt-ft5x06"; - reg = <0x38>; - interrupt-parent = <&gpiog>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ - linux,wakeup; - }; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_b>; - pinctrl-1 = <<dc_pins_sleep_b>; - status = "okay"; - - port { - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; + model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)"; + compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som", + "st,stm32mp157"; }; &m_can1 { @@ -163,103 +26,3 @@ pinctrl-1 = <&m_can1_sleep_pins_a>; status = "okay"; }; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller@4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&sgtl5000_tx_endpoint>; - format = "i2s"; - mclk-fs = <512>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <16>; - }; - }; - }; - - sai2b: audio-controller@4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&sgtl5000_rx_endpoint>; - format = "i2s"; - mclk-fs = <512>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <16>; - }; - }; - }; -}; - -&timers2 { - /* spare dmas for other usage (un-delete to enable pwm capture) */ - /delete-property/dmas; - /delete-property/dma-names; - status = "okay"; - pwm2: pwm { - pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - timer@1 { - status = "okay"; - }; -}; - -&usart3 { - pinctrl-names = "default"; - pinctrl-0 = <&usart3_pins_a>; - status = "okay"; -}; - -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a>; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; -}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 7985b80967ca..9a8a26710ac1 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -27,15 +27,10 @@ }; &dsi { - #address-cells = <1>; - #size-cells = <0>; status = "okay"; phy-dsi-supply = <®18>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; dsi_in: endpoint { @@ -83,9 +78,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep1_out: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 9d2592db630c..32ccd50b4144 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -126,13 +126,12 @@ &gpu { contiguous-area = <&gpu_reserved>; - status = "okay"; }; &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_pins_sleep_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; clock-frequency = <400000>; @@ -320,6 +319,10 @@ bus-width = <4>; vmmc-supply = <&vdd_sd>; vqmmc-supply = <&sd_switch>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 8a4c7ff31a92..b19056557ef0 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -98,15 +98,10 @@ }; &dsi { - #address-cells = <1>; - #size-cells = <0>; phy-dsi-supply = <®18>; status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; dsi_in: endpoint { @@ -141,7 +136,7 @@ ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii-id"; max-speed = <1000>; @@ -176,7 +171,7 @@ &i2c2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; - pinctrl-1 = <&i2c2_pins_sleep_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -230,7 +225,7 @@ &i2c5 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; - pinctrl-1 = <&i2c5_pins_sleep_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -240,9 +235,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts new file mode 100644 index 000000000000..5700e6b700d3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xx-osd32.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" + +#include +#include + +/ { + model = "Linux Automation MC-1 board"; + compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + serial0 = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <7>; + power-supply = <®_5v2>; /* 3V3_BACKLIGHT */ + }; + + chosen { + stdout-path = &uart4; + }; + + led-act { + compatible = "gpio-leds"; + + led-green { + label = "mc1:green:act"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + led-rgb { + compatible = "pwm-leds"; + + led-red { + label = "mc1:red:rgb"; + pwms = <&leds_pwm 1 1000000 0>; + max-brightness = <255>; + active-low; + }; + + led-green { + label = "mc1:green:rgb"; + pwms = <&leds_pwm 2 1000000 0>; + max-brightness = <255>; + active-low; + }; + + led-blue { + label = "mc1:blue:rgb"; + pwms = <&leds_pwm 3 1000000 0>; + max-brightness = <255>; + active-low; + }; + }; + + panel: panel { + compatible = "edt,etm0700g0edh6", "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + + port { + panel_input: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + + reg_3v3: regulator_3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; + + /* supplied by either debug board or PoE */ + reg_5v2: regulator_5v2 { + compatible = "regulator-fixed"; + regulator-name = "5V2"; + regulator-min-microvolt = <5200000>; + regulator-max-microvolt = <5200000>; + regulator-always-on; + }; +}; + +ðernet0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ðernet0_rgmii_pins_b>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_b>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + status = "okay"; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { /* KSZ9031RN */ + reg = <3>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + interrupt-parent = <&gpioa>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ + rxc-skew-ps = <1860>; + txc-skew-ps = <1860>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + micrel,force-master; + }; + }; +}; + +&gpioz { + gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "", + "HWID4", "HWID5"; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_b>; + pinctrl-1 = <&i2c5_sleep_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + interrupt-parent = <&gpiod>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */ + vcc-supply = <®_3v3>; + reg = <0x38>; + reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */ + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; + wakeup-source; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_c>; + pinctrl-1 = <<dc_sleep_pins_c>; + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; +}; + +&pmic { + regulators { + buck4-supply = <®_5v2>; /* VIN */ + ldo2-supply = <®_5v2>; /* PMIC_LDO25IN */ + ldo5-supply = <®_5v2>; /* PMIC_LDO25IN */ + boost-supply = <®_5v2>; /* PMIC_BSTIN */ + pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */ + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + bus-width = <4>; + cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + disable-wp; + no-1-8-v; + st,neg-edge; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_pins_a { + /* + * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to + * work, thus enable internal pull-ups. + */ + pins1 { + /delete-property/ bias-disable; + bias-pull-up; + }; + pins2 { + /delete-property/ bias-disable; + bias-pull-up; + }; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&timers3 { + status = "okay"; + + backlight_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm3_pins_b>; + pinctrl-1 = <&pwm3_sleep_pins_b>; + status = "okay"; + }; +}; + +&timers5 { + status = "okay"; + + leds_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm5_pins_b>; + pinctrl-1 = <&pwm5_sleep_pins_b>; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi new file mode 100644 index 000000000000..7c4bd615b311 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019-2020 Marek Vasut + */ + +#include +#include + +/ { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + ethernet0 = ðernet0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #size-cells = <0>; + poll-interval = <20>; + + /* + * The EXTi IRQ line 3 is shared with touchscreen and ethernet, + * so mark this as polled GPIO key. + */ + button-0 { + label = "TA1-GPIO-A"; + linux,code = ; + gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #size-cells = <0>; + + button-1 { + label = "TA2-GPIO-B"; + linux,code = ; + gpios = <&gpiod 6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-2 { + label = "TA3-GPIO-C"; + linux,code = ; + gpios = <&gpioi 11 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-3 { + label = "TA4-GPIO-D"; + linux,code = ; + gpios = <&gpiod 12 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + label = "green:led5"; + gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + label = "green:led6"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "green:led7"; + gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + label = "green:led8"; + gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + sound { + compatible = "audio-graph-card"; + routing = + "MIC_IN", "Capture", + "Capture", "Mic Bias", + "Playback", "HP_OUT"; + dais = <&sai2a_port &sai2b_port>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c2 { /* Header X22 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&i2c5 { /* Header X21 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <&v3v3>; + VDDIO-supply = <&vdd>; + + sgtl5000_port: port { + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + sgtl5000_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + + }; + + polytouch@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpiog>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + linux,wakeup; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_b>; + pinctrl-1 = <<dc_sleep_pins_b>; + status = "okay"; + + port { + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&sgtl5000_tx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&sgtl5000_rx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; +}; + +&timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + pwm2: pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi similarity index 98% rename from arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi rename to arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index f81dc3134135..ba905196fb54 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -1,11 +1,8 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright (C) 2019 Marek Vasut + * Copyright (C) 2019-2020 Marek Vasut */ -/dts-v1/; -#include "stm32mp157.dtsi" -#include "stm32mp15xc.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include @@ -97,10 +94,6 @@ status = "okay"; }; -&gpu { - status = "okay"; -}; - &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi new file mode 100644 index 000000000000..930202742a3f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam + * Copyright (C) 2020 Marek Vasut + */ + +/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */ +#include "stm32mp15xx-dhcor-io1v8.dtsi" + +/ { + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + serial2 = &usart2; + spi0 = &qspi; + }; + + /* XTal Q1 */ + cec_clock: clk-cec-fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7513_out>; + }; + }; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "green:user0"; + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user1"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user2"; + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user3"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + regulator-always-on; + + gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-AV96-HDMI"; + dais = <&sai2a_port>; + status = "okay"; + }; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_b>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 6>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <0 1 2>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + + phy0: ethernet-phy@7 { + reg = <7>; + + rxc-skew-ps = <1500>; + rxdv-skew-ps = <540>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + + txc-skew-ps = <1440>; + txen-skew-ps = <540>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <420>; + txd3-skew-ps = <420>; + }; + }; +}; + +&i2c1 { /* X6 I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c2 { /* X6 I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_c>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + hdmi-transmitter@3d { + compatible = "adi,adv7513"; + reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>; + reg-names = "main", "cec", "edid", "packet"; + clocks = <&cec_clock>; + clock-names = "cec"; + + avdd-supply = <&v3v3>; + dvdd-supply = <&v3v3>; + pvdd-supply = <&v3v3>; + dvdd-3v-supply = <&v3v3>; + bgvdd-supply = <&v3v3>; + + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + + status = "okay"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7513_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + port@2 { + reg = <2>; + adv7513_i2s0: endpoint { + remote-endpoint = <&sai2a_endpoint>; + }; + }; + }; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_d>; + pinctrl-1 = <<dc_sleep_pins_d>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&adv7513_in>; + }; + }; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_c>; + pinctrl-1 = <&sai2a_sleep_pins_c>; + clock-names = "pclk", "x8k", "x11k"; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&adv7513_i2s0>; + format = "i2s"; + mclk-fs = <256>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + bus-width = <8>; + mmc-ddr-1_8v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd_io>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + cs-gpios = <&gpioi 0 0>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&uart4 { + /* On Low speed expansion header */ + label = "LS-UART1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; + status = "okay"; +}; + +&uart7 { + /* On Low speed expansion header */ + label = "LS-UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + st,hw-flow-ctrl; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + status = "okay"; + vbus-supply = <&vbus_otg>; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi new file mode 100644 index 000000000000..75172314d7af --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam + * Copyright (C) 2020 Marek Vasut + */ + +/ { + /* Enpirion EP3A8LQI U2 on the DHCOR */ + vdd_io: regulator-buck-io { + compatible = "regulator-fixed"; + regulator-name = "buck-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&pwr_regulators { + vdd-supply = <&vdd_io>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi new file mode 100644 index 000000000000..04fbb324a541 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam + * Copyright (C) 2020 Marek Vasut + */ + +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include +#include + +/ { + aliases { + spi0 = &qspi; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x40000000>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = ; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = ; + regulator-enable-ramp-delay = <300000>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + regulator-active-discharge = <1>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index d946e0a02f5c..70db923a45f7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -112,14 +112,18 @@ &cec { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; + pinctrl-1 = <&cec_sleep_pins_b>; + status = "okay"; +}; + +&dts { status = "okay"; }; ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii-id"; max-speed = <1000>; @@ -137,13 +141,12 @@ &gpu { contiguous-area = <&gpu_reserved>; - status = "okay"; }; &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; i2c-scl-rising-time-ns = <100>; i2c-scl-falling-time-ns = <7>; status = "okay"; @@ -218,7 +221,7 @@ &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_pins_sleep_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; clock-frequency = <400000>; @@ -367,7 +370,7 @@ clock-names = "pclk", "i2sclk", "x8k", "x11k"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; + pinctrl-1 = <&i2s2_sleep_pins_a>; status = "okay"; i2s2_port: port { @@ -391,13 +394,10 @@ <dc { pinctrl-names = "default", "sleep"; pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; + pinctrl-1 = <<dc_sleep_pins_a>; status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&sii9022_in>; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi new file mode 100644 index 000000000000..713485a95795 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +#include "stm32mp15-pinctrl.dtsi" + +#include + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + reg_sip_eeprom: regulator_eeprom { + compatible = "regulator-fixed"; + regulator-name = "sip_eeprom"; + regulator-always-on; + }; +}; + +&i2c4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = ; + + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = ; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + }; + + pmic_watchdog: watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + sip_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + vcc-supply = <®_sip_eeprom>; + reg = <0x50>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts new file mode 100644 index 000000000000..033cab3443f8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Olimex Ltd. + * Author: Stefan Mavrodiev + */ + +#include "sun7i-a20-olinuxino-lime.dts" + +/ { + model = "Olimex A20-OLinuXino-LIME-eMMC"; + compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 655404d6d3a3..c010b27fdb6a 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -610,6 +610,16 @@ clock-names = "bus", "mod"; }; + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-a83t-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = ; + #mbox-cells = <1>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index d277d043031b..4c6704e4c57e 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -31,7 +31,7 @@ pwr_led { label = "bananapi-m2-zero:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e83aa6866e7e..4e89701df91f 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -112,6 +112,26 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + }; + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = , @@ -205,9 +225,7 @@ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; clock-names = "bus", "core"; resets = <&ccu RST_BUS_GPU>; - - assigned-clocks = <&ccu CLK_GPU>; - assigned-clock-rates = <384000000>; + operating-points-v2 = <&gpu_opp_table>; }; ths: thermal-sensor@1c25000 { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 01a5df9aa71b..22d533d18992 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -239,6 +239,16 @@ }; }; + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = ; + #mbox-cells = <1>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index d3e032e7d21a..08be733ee2cd 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -46,8 +46,7 @@ avdd-dsi-csi-supply = <&avdd_1v2_reg>; panel@0 { - compatible = "panasonic,vvx10f004b00", - "simple-panel"; + compatible = "panasonic,vvx10f004b00"; reg = <0>; power-supply = <&avdd_lcd_reg>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 8c2ee6e7d6f1..73361dbe2e43 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1087,7 +1087,7 @@ }; panel: panel { - compatible = "lg,lp129qe", "simple-panel"; + compatible = "lg,lp129qe"; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts index 3c0f2681fcde..37ad508b61d9 100644 --- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts @@ -223,7 +223,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index d8004d68efa0..af4740847769 100644 --- a/arch/arm/boot/dts/tegra20-colibri-iris.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -205,7 +205,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 1d96d92b72a7..02cd67ea2503 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -665,7 +665,7 @@ }; panel: panel { - compatible = "auo,b101aw03", "simple-panel"; + compatible = "auo,b101aw03"; power-supply = <&vdd_pnl_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index cda5448c2ace..c73510cd501c 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -57,7 +57,7 @@ }; panel: panel { - compatible = "innolux,n156bge-l21", "simple-panel"; + compatible = "innolux,n156bge-l21"; power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index be0ab9b84b9a..cce3a3fb82ed 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -604,7 +604,7 @@ }; panel: panel { - compatible = "samsung,ltn101nt05", "simple-panel"; + compatible = "samsung,ltn101nt05"; ddc-i2c-bus = <&lvds_ddc>; power-supply = <&vdd_pnl_reg>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f91441683aad..376ecb6435f4 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -826,7 +826,7 @@ }; panel: panel { - compatible = "chunghwa,claa101wa01a", "simple-panel"; + compatible = "chunghwa,claa101wa01a"; power-supply = <&vdd_pnl_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index f44551e2d9d0..022649119821 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -611,7 +611,7 @@ }; panel: panel { - compatible = "chunghwa,claa101wa01a", "simple-panel"; + compatible = "chunghwa,claa101wa01a"; power-supply = <&vdd_pnl_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 749fc6d1ff70..b39c26806bf2 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -195,7 +195,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts index 0be50e881684..e29dca92ba0a 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts @@ -196,7 +196,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 45ef6002b225..6b6fd8a8058f 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" / { model = "NVIDIA Tegra30 Beaver evaluation board"; @@ -1806,9 +1808,14 @@ vddctrl_reg: vddctrl { regulator-name = "vdd_cpu,vdd_sys"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&core_vdd_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; vio_reg: vio { @@ -1868,17 +1875,22 @@ }; }; - tps62361@60 { + core_vdd_reg: tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; regulator-name = "tps62361-vout"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1500000>; + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-boot-on; regulator-always-on; ti,vsel0-state-high; ti,vsel1-state-high; + + nvidia,tegra-core-regulator; }; }; @@ -2120,4 +2132,26 @@ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, <&tegra_car TEGRA30_CLK_EXTERN1>; }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 4b4f49a49394..5ee5d141bd81 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -432,7 +432,7 @@ }; panel: panel { - compatible = "chunghwa,claa101wb01", "simple-panel"; + compatible = "chunghwa,claa101wb01"; ddc-i2c-bus = <&panelddc>; power-supply = <&vdd_pnl1_reg>; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 5965150ecdd2..8e106e784dce 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -159,7 +159,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 06e7400d2940..b52957ccda0d 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -67,6 +67,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 60994b6e8b99..079cadc11e6c 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -29,6 +29,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 92cc48dd86d0..64246fad325c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -26,6 +26,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 854f2eba3e72..181442c48532 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -29,6 +29,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index dda1a2f214a8..5396556dee58 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -25,6 +25,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 1c866f0306fc..a53b73ee93e9 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -75,6 +75,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -426,6 +428,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 8f1ae0957f5f..feadb4a378eb 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -160,6 +160,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -171,6 +173,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -408,6 +412,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index e27fd4f2a569..8e9ac579aa9a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -26,6 +26,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 23fe42b7408b..8eacc7bdecb7 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -24,6 +24,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 2f2a24994c69..b0b15c97306b 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -173,6 +173,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -184,6 +186,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -508,6 +512,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 09992163e1f4..96a766deb8d1 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -67,6 +67,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 5c183483ec3b..e6308fb76183 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -19,8 +19,162 @@ */ / { + v2m_fixed_3v3: fixed-regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "disk-activity"; + }; + + led-3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + led-4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + led-5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + led-6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + led-7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + led-8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + oscclk0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 65000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: oscclk2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt-vio { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp-mcc { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; + bus@8000000 { - motherboard { + motherboard-bus { model = "V2M-P1"; arm,hbi = <0x190>; arm,vexpress,site = <0>; @@ -31,7 +185,7 @@ #interrupt-cells = <1>; ranges; - nor_flash: flash@0,00000000 { + nor_flash: flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; @@ -41,13 +195,13 @@ }; }; - psram@1,00000000 { + psram@100000000 { compatible = "arm,vexpress-psram", "mtd-ram"; reg = <1 0x00000000 0x02000000>; bank-width = <4>; }; - ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x02000000 0x10000>; interrupts = <15>; @@ -59,14 +213,14 @@ vddvario-supply = <&v2m_fixed_3v3>; }; - usb@2,03000000 { + usb@203000000 { compatible = "nxp,usb-isp1761"; reg = <2 0x03000000 0x20000>; interrupts = <16>; port1-otg; }; - iofpga@3,00000000 { + iofpga-bus@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -162,7 +316,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -170,7 +324,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -178,7 +332,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -186,7 +340,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -282,160 +436,6 @@ }; }; }; - - v2m_fixed_3v3: fixed-regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - leds { - compatible = "gpio-leds"; - - user1 { - label = "v2m:green:user1"; - gpios = <&v2m_led_gpios 0 0>; - linux,default-trigger = "heartbeat"; - }; - - user2 { - label = "v2m:green:user2"; - gpios = <&v2m_led_gpios 1 0>; - linux,default-trigger = "mmc0"; - }; - - user3 { - label = "v2m:green:user3"; - gpios = <&v2m_led_gpios 2 0>; - linux,default-trigger = "cpu0"; - }; - - user4 { - label = "v2m:green:user4"; - gpios = <&v2m_led_gpios 3 0>; - linux,default-trigger = "cpu1"; - }; - - user5 { - label = "v2m:green:user5"; - gpios = <&v2m_led_gpios 4 0>; - linux,default-trigger = "cpu2"; - }; - - user6 { - label = "v2m:green:user6"; - gpios = <&v2m_led_gpios 5 0>; - linux,default-trigger = "cpu3"; - }; - - user7 { - label = "v2m:green:user7"; - gpios = <&v2m_led_gpios 6 0>; - linux,default-trigger = "cpu4"; - }; - - user8 { - label = "v2m:green:user8"; - gpios = <&v2m_led_gpios 7 0>; - linux,default-trigger = "cpu5"; - }; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; - - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; - - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; - - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; - - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; }; }; }; diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 8e7a3ed2a4df..44ff9cd88d81 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -103,6 +103,7 @@ CONFIG_WATCHDOG=y CONFIG_BCM2835_WDT=y CONFIG_MFD_SYSCON=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig deleted file mode 100644 index fa997ae2673e..000000000000 --- a/arch/arm/configs/cm_x2xx_defconfig +++ /dev/null @@ -1,173 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_ARMCORE=y -CONFIG_PCI=y -CONFIG_PCCARD=m -CONFIG_YENTA=m -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_ENE_TUNE is not set -# CONFIG_YENTA_TOSHIBA is not set -CONFIG_PCMCIA_PXA2XX=m -CONFIG_NO_HZ=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_BNEP=m -CONFIG_BT_HIDP=m -CONFIG_LIB80211=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PXA2XX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_CM_X270=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=m -# CONFIG_SATA_PMP is not set -CONFIG_PATA_PCMCIA=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -CONFIG_NET_PCI=y -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_PXA27x=m -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_UCB1400=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=m -# CONFIG_HWMON is not set -CONFIG_UCB1400_CORE=m -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -# CONFIG_LCD_CLASS_DEVICE is not set -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set -CONFIG_SND_PXA2XX_AC97=m -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=m -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_V3020=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=m -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_FRAME_WARN=0 -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig deleted file mode 100644 index d08f02014755..000000000000 --- a/arch/arm/configs/em_x270_defconfig +++ /dev/null @@ -1,178 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_EM_X270=y -CONFIG_MACH_EXEDA=y -CONFIG_NO_HZ=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_BNEP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HCIBTUSB=m -CONFIG_LIB80211=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PXA2XX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_APMPOWER=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_PXA27x=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_DA9034 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -# CONFIG_TOUCHSCREEN_WM9705 is not set -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=y -CONFIG_POWER_SUPPLY=y -CONFIG_BATTERY_DA9030=y -# CONFIG_HWMON is not set -CONFIG_PMIC_DA903X=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DA903X=y -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_TDO24M=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_DA903X=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_EM_X270=m -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=m -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_DA903X=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_V3020=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=m -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_FRAME_WARN=0 -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 2c779ac13270..374fbff8eaa6 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -69,6 +69,7 @@ CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y CONFIG_BT_HCIUART_INTEL=y +CONFIG_BT_HCIUART_BCM=y CONFIG_BT_HCIUART_AG6XX=y CONFIG_BT_HCIUART_MRVL=y CONFIG_BT_HCIBCM203X=m @@ -78,8 +79,8 @@ CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m CONFIG_BT_ATH3K=m -CONFIG_CFG80211=y -CONFIG_MAC80211=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m CONFIG_MAC80211_LEDS=y CONFIG_NFC=y CONFIG_NFC_DIGITAL=m @@ -94,7 +95,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y @@ -133,6 +134,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_HW_RANDOM=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5a20d12d62bd..87e6400c436b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -395,6 +395,7 @@ CONFIG_RTC_DRV_DA9063=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_RTC_DRV_MXC_V2=y +CONFIG_RTC_DRV_RC5T619=y CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y CONFIG_FSL_EDMA=y @@ -408,6 +409,7 @@ CONFIG_COMMON_CLK_PWM=y CONFIG_IIO=y CONFIG_MMA8452=y CONFIG_IMX7D_ADC=y +CONFIG_RN5T618_ADC=y CONFIG_VF610_ADC=y CONFIG_SENSORS_ISL29018=y CONFIG_MAG3110=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 9c86b1ab2f1d..95543914d3c7 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -979,6 +979,7 @@ CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R7S9210=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7742=y CONFIG_ARCH_R8A7743=y CONFIG_ARCH_R8A7744=y CONFIG_ARCH_R8A7745=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index b817c57f05f1..e6559e3350e6 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -38,8 +38,6 @@ CONFIG_MACH_ARCOM_ZEUS=y CONFIG_MACH_BALLOON3=y CONFIG_MACH_CSB726=y CONFIG_CSB726_CSB701=y -CONFIG_MACH_ARMCORE=y -CONFIG_MACH_EM_X270=y CONFIG_MACH_EXEDA=y CONFIG_MACH_CM_X300=y CONFIG_MACH_CAPC7117=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index bab7861443dc..8e1f78c19920 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -128,6 +128,7 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_SAMA5D2_PIOBU=m CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_ACT8945A=y CONFIG_POWER_RESET=y @@ -142,6 +143,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y +CONFIG_REGULATOR_MCP16502=m CONFIG_REGULATOR_PWM=m CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 838307a9bb92..9cf3143025e1 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -125,6 +125,7 @@ CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_DISPLAY_CONNECTOR=y CONFIG_DRM_LVDS_CODEC=y CONFIG_DRM_SII902X=y CONFIG_DRM_SIMPLE_BRIDGE=y @@ -178,6 +179,7 @@ CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R7S9210=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7742=y CONFIG_ARCH_R8A7743=y CONFIG_ARCH_R8A7744=y CONFIG_ARCH_R8A7745=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 61b8be19e527..b105ce7120cc 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -107,6 +107,7 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SUN4I_CODEC=y +CONFIG_SND_SUN8I_CODEC_ANALOG=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 4dd5c92fe3b7..28dd7cf56048 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -32,6 +32,9 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y CONFIG_PHONET=y +CONFIG_BT=y +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=y CONFIG_CFG80211_DEBUGFS=y CONFIG_MAC80211=y @@ -44,6 +47,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y +CONFIG_BRCMFMAC=m CONFIG_CW1200=y CONFIG_CW1200_WLAN_SDIO=y CONFIG_INPUT_EVDEV=y @@ -54,9 +58,11 @@ CONFIG_KEYBOARD_STMPE=y CONFIG_KEYBOARD_TC3589X=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_BU21013=y CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y +CONFIG_INPUT_GPIO_VIBRA=y CONFIG_RMI4_CORE=y CONFIG_RMI4_I2C=y CONFIG_RMI4_F11=y @@ -64,7 +70,9 @@ CONFIG_RMI4_F11=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_HW_RANDOM=y +CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y @@ -78,11 +86,14 @@ CONFIG_MFD_TC3589X=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_GPIO=y CONFIG_DRM=y +CONFIG_DRM_PANEL_NOVATEK_NT35510=y CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y +CONFIG_DRM_PANEL_SONY_ACX424AKP=y CONFIG_DRM_LIMA=y CONFIG_DRM_MCDE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_GPIO=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -113,9 +124,12 @@ CONFIG_HWSPINLOCK=y CONFIG_HSEM_U8500=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y +CONFIG_BMA180=y CONFIG_IIO_ST_ACCEL_3AXIS=y CONFIG_IIO_ST_GYRO_3AXIS=y +CONFIG_INV_MPU6050_I2C=y CONFIG_BH1780=y +CONFIG_GP2AP002=y CONFIG_AK8974=y CONFIG_IIO_ST_MAGN_3AXIS=y CONFIG_IIO_HRTIMER_TRIGGER=y diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index eb4e4207cd3c..31811be38d78 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -10,8 +10,6 @@ #define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT) #define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) -#define kmap_prot PAGE_KERNEL - #define flush_cache_kmaps() \ do { \ if (cache_is_vivt()) \ @@ -20,9 +18,6 @@ extern pte_t *pkmap_page_table; -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - /* * The reason for kmap_high_get() is to ensure that the currently kmap'd * page usage count does not decrease to zero while we're using its @@ -63,10 +58,6 @@ static inline void *kmap_high_get(struct page *page) * when CONFIG_HIGHMEM is not set. */ #ifdef CONFIG_HIGHMEM -extern void *kmap(struct page *page); -extern void kunmap(struct page *page); -extern void *kmap_atomic(struct page *page); -extern void __kunmap_atomic(void *kvaddr); extern void *kmap_atomic_pfn(unsigned long pfn); #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index befc8fcec98f..fba20607c53c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -17,7 +17,6 @@ #else -#define __ARCH_USE_5LEVEL_HACK #include #include #include diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index dddc7ebf4db4..09b149b09c43 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -8,7 +8,6 @@ * This file contains the ARM-specific time handling details: * reading the RTC at bootup, etc... */ -#include #include #include #include @@ -17,6 +16,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index c9450982a155..d72b14c96670 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -24,6 +24,7 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) { unsigned long addr = (unsigned long)_addr; pgd_t *pgd; + p4d_t *p4d; pmd_t *pmd; pte_t *pte; pud_t *pud; @@ -33,7 +34,11 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) return 0; - pud = pud_offset(pgd, addr); + p4d = p4d_offset(pgd, addr); + if (unlikely(p4d_none(*p4d) || p4d_bad(*p4d))) + return 0; + + pud = pud_offset(p4d, addr); if (unlikely(pud_none(*pud) || pud_bad(*pud))) return 0; diff --git a/arch/arm/mach-actions/Kconfig b/arch/arm/mach-actions/Kconfig index b5e0ac965ec0..00fb4babccdd 100644 --- a/arch/arm/mach-actions/Kconfig +++ b/arch/arm/mach-actions/Kconfig @@ -7,7 +7,6 @@ menuconfig ARCH_ACTIONS select ARM_GLOBAL_TIMER select CACHE_L2X0 select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK - select COMMON_CLK select GENERIC_IRQ_CHIP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index bc04c91294cf..6a68a162385b 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -7,7 +7,6 @@ config ARCH_ALPINE select ARM_GIC select GENERIC_IRQ_CHIP select HAVE_ARM_ARCH_TIMER - select HAVE_SMP select MFD_SYSCON select FORCE_PCI select PCI_HOST_GENERIC diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index e42dbaa53bc6..a2e1d0aaf252 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -4,6 +4,5 @@ config MACH_ASM9260 depends on ARCH_MULTI_V5 select CPU_ARM926T select ASM9260_TIMER - select GENERIC_CLOCKEVENTS help Support for Alphascale ASM9260 based platform. diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index e8d6e9957d65..ea96d11b8502 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -39,7 +39,6 @@ config MACH_ASPEED_G6 select PINCTRL_ASPEED_G6 select ARM_GIC select HAVE_ARM_ARCH_TIMER - select HAVE_SMP help Say yes if you intend to run on an Aspeed ast2600 or similar sixth generation Aspeed BMCs. diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 5b1f61fd7878..01861fa72c97 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -19,7 +19,6 @@ config MACH_BERLIN_BG2 select CPU_PJ4B select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select PINCTRL_BERLIN_BG2 config MACH_BERLIN_BG2CD diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index fc9188b54dd6..314de9477b84 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -2,15 +2,10 @@ menuconfig ARCH_CLPS711X bool "Cirrus Logic EP721x/EP731x-based" depends on ARCH_MULTI_V4T - select AUTO_ZRELADDR - select TIMER_OF select CLPS711X_TIMER - select COMMON_CLK select CPU_ARM720T - select GENERIC_CLOCKEVENTS select GPIOLIB select MFD_SYSCON select OF_IRQ - select USE_OF help Select this if you use ARMv4T Cirrus Logic chips. diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 02b180ad7245..d028d38a44bf 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -64,7 +64,6 @@ config MACH_DA8XX_DT default y depends on ARCH_DAVINCI_DA850 select PINCTRL - select TIMER_OF help Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 3461d12bbfc0..a5d3708fedf6 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -655,19 +655,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, }; -/* Fixed regulator support */ -static struct regulator_consumer_supply fixed_supplies_3_3v[] = { - /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */ - REGULATOR_SUPPLY("AVDD", "1-001b"), - REGULATOR_SUPPLY("DRVDD", "1-001b"), -}; - -static struct regulator_consumer_supply fixed_supplies_1_8v[] = { - /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */ - REGULATOR_SUPPLY("IOVDD", "1-001b"), - REGULATOR_SUPPLY("DVDD", "1-001b"), -}; - #define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12) #define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11) @@ -700,6 +687,19 @@ static void __init evm_init_i2c(void) } #endif +/* Fixed regulator support */ +static struct regulator_consumer_supply fixed_supplies_3_3v[] = { + /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */ + REGULATOR_SUPPLY("AVDD", "1-001b"), + REGULATOR_SUPPLY("DRVDD", "1-001b"), +}; + +static struct regulator_consumer_supply fixed_supplies_1_8v[] = { + /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */ + REGULATOR_SUPPLY("IOVDD", "1-001b"), + REGULATOR_SUPPLY("DVDD", "1-001b"), +}; + #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) /* venc standard timings */ diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5aa5796cff0e..72c3fcc32910 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -49,7 +49,6 @@ void imx_aips_allow_unprivileged_access(const char *compat); int mxc_device_init(void); void imx_set_soc_revision(unsigned int rev); void imx_init_revision_from_anatop(void); -struct device *imx_soc_device_init(void); void imx6_enable_rbc(bool enable); void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 06f8d64b65af..65c7224f5250 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,25 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 #include -#include #include #include #include #include -#include -#include -#include #include "hardware.h" #include "common.h" -#define OCOTP_UID_H 0x420 -#define OCOTP_UID_L 0x410 - -#define OCOTP_ULP_UID_1 0x4b0 -#define OCOTP_ULP_UID_2 0x4c0 -#define OCOTP_ULP_UID_3 0x4d0 -#define OCOTP_ULP_UID_4 0x4e0 - unsigned int __mxc_cpu_type; static unsigned int imx_soc_revision; @@ -82,150 +70,3 @@ void __init imx_aips_allow_unprivileged_access( imx_set_aips(aips_base_addr); } } - -struct device * __init imx_soc_device_init(void) -{ - struct soc_device_attribute *soc_dev_attr; - const char *ocotp_compat = NULL; - struct soc_device *soc_dev; - struct device_node *root; - struct regmap *ocotp = NULL; - const char *soc_id; - u64 soc_uid = 0; - u32 val; - int ret; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return NULL; - - soc_dev_attr->family = "Freescale i.MX"; - - root = of_find_node_by_path("/"); - ret = of_property_read_string(root, "model", &soc_dev_attr->machine); - of_node_put(root); - if (ret) - goto free_soc; - - switch (__mxc_cpu_type) { - case MXC_CPU_MX1: - soc_id = "i.MX1"; - break; - case MXC_CPU_MX21: - soc_id = "i.MX21"; - break; - case MXC_CPU_MX25: - soc_id = "i.MX25"; - break; - case MXC_CPU_MX27: - soc_id = "i.MX27"; - break; - case MXC_CPU_MX31: - soc_id = "i.MX31"; - break; - case MXC_CPU_MX35: - soc_id = "i.MX35"; - break; - case MXC_CPU_MX51: - soc_id = "i.MX51"; - break; - case MXC_CPU_MX53: - soc_id = "i.MX53"; - break; - case MXC_CPU_IMX6SL: - ocotp_compat = "fsl,imx6sl-ocotp"; - soc_id = "i.MX6SL"; - break; - case MXC_CPU_IMX6DL: - ocotp_compat = "fsl,imx6q-ocotp"; - soc_id = "i.MX6DL"; - break; - case MXC_CPU_IMX6SX: - ocotp_compat = "fsl,imx6sx-ocotp"; - soc_id = "i.MX6SX"; - break; - case MXC_CPU_IMX6Q: - ocotp_compat = "fsl,imx6q-ocotp"; - soc_id = "i.MX6Q"; - break; - case MXC_CPU_IMX6UL: - ocotp_compat = "fsl,imx6ul-ocotp"; - soc_id = "i.MX6UL"; - break; - case MXC_CPU_IMX6ULL: - ocotp_compat = "fsl,imx6ull-ocotp"; - soc_id = "i.MX6ULL"; - break; - case MXC_CPU_IMX6ULZ: - ocotp_compat = "fsl,imx6ull-ocotp"; - soc_id = "i.MX6ULZ"; - break; - case MXC_CPU_IMX6SLL: - ocotp_compat = "fsl,imx6sll-ocotp"; - soc_id = "i.MX6SLL"; - break; - case MXC_CPU_IMX7D: - ocotp_compat = "fsl,imx7d-ocotp"; - soc_id = "i.MX7D"; - break; - case MXC_CPU_IMX7ULP: - ocotp_compat = "fsl,imx7ulp-ocotp"; - soc_id = "i.MX7ULP"; - break; - default: - soc_id = "Unknown"; - } - soc_dev_attr->soc_id = soc_id; - - if (ocotp_compat) { - ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat); - if (IS_ERR(ocotp)) - pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat); - } - - if (!IS_ERR_OR_NULL(ocotp)) { - if (__mxc_cpu_type == MXC_CPU_IMX7ULP) { - regmap_read(ocotp, OCOTP_ULP_UID_4, &val); - soc_uid = val & 0xffff; - regmap_read(ocotp, OCOTP_ULP_UID_3, &val); - soc_uid <<= 16; - soc_uid |= val & 0xffff; - regmap_read(ocotp, OCOTP_ULP_UID_2, &val); - soc_uid <<= 16; - soc_uid |= val & 0xffff; - regmap_read(ocotp, OCOTP_ULP_UID_1, &val); - soc_uid <<= 16; - soc_uid |= val & 0xffff; - } else { - regmap_read(ocotp, OCOTP_UID_H, &val); - soc_uid = val; - regmap_read(ocotp, OCOTP_UID_L, &val); - soc_uid <<= 32; - soc_uid |= val; - } - } - - soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", - (imx_soc_revision >> 4) & 0xf, - imx_soc_revision & 0xf); - if (!soc_dev_attr->revision) - goto free_soc; - - soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid); - if (!soc_dev_attr->serial_number) - goto free_rev; - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) - goto free_serial_number; - - return soc_device_to_device(soc_dev); - -free_serial_number: - kfree(soc_dev_attr->serial_number); -free_rev: - kfree(soc_dev_attr->revision); -free_soc: - kfree(soc_dev_attr); - return NULL; -} diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 284bce1112d2..85c084a716ab 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -245,21 +245,15 @@ static void __init imx6q_axi_init(void) static void __init imx6q_init_machine(void) { - struct device *parent; - if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0) imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0); else imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", imx_get_soc_revision()); - parent = imx_soc_device_init(); - if (parent == NULL) - pr_warn("failed to initialize soc device\n"); - imx6q_enet_phy_init(); - of_platform_default_populate(NULL, NULL, parent); + of_platform_default_populate(NULL, NULL, NULL); imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index e27a6889cc56..f6e87363d605 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -45,13 +45,7 @@ static void __init imx6sl_init_late(void) static void __init imx6sl_init_machine(void) { - struct device *parent; - - parent = imx_soc_device_init(); - if (parent == NULL) - pr_warn("failed to initialize soc device\n"); - - of_platform_default_populate(NULL, NULL, parent); + of_platform_default_populate(NULL, NULL, NULL); if (cpu_is_imx6sl()) imx6sl_fec_init(); diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index d5310bf307ff..781e2a94fdd7 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -63,13 +63,7 @@ static inline void imx6sx_enet_init(void) static void __init imx6sx_init_machine(void) { - struct device *parent; - - parent = imx_soc_device_init(); - if (parent == NULL) - pr_warn("failed to initialize soc device\n"); - - of_platform_default_populate(NULL, NULL, parent); + of_platform_default_populate(NULL, NULL, NULL); imx6sx_enet_init(); imx_anatop_init(); diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 3b0e16ccd59d..e018e716735f 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -55,13 +55,7 @@ static inline void imx6ul_enet_init(void) static void __init imx6ul_init_machine(void) { - struct device *parent; - - parent = imx_soc_device_init(); - if (parent == NULL) - pr_warn("failed to initialize soc device\n"); - - of_platform_default_populate(NULL, NULL, parent); + of_platform_default_populate(NULL, NULL, NULL); imx6ul_enet_init(); imx_anatop_init(); imx6ul_pm_init(); diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index ebb27592a9f7..879c35929a13 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -78,12 +78,6 @@ static inline void imx7d_enet_init(void) static void __init imx7d_init_machine(void) { - struct device *parent; - - parent = imx_soc_device_init(); - if (parent == NULL) - pr_warn("failed to initialize soc device\n"); - imx_anatop_init(); imx7d_enet_init(); } diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c index 11ac71aaf965..128cf4c92aab 100644 --- a/arch/arm/mach-imx/mach-imx7ulp.c +++ b/arch/arm/mach-imx/mach-imx7ulp.c @@ -57,7 +57,7 @@ static void __init imx7ulp_init_machine(void) mxc_set_cpu_type(MXC_CPU_IMX7ULP); imx7ulp_set_revision(); - of_platform_default_populate(NULL, NULL, imx_soc_device_init()); + of_platform_default_populate(NULL, NULL, NULL); } static const char *const imx7ulp_dt_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index bd9443fa6edc..c7d23e9d4f8b 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -404,7 +404,7 @@ static struct resource pcm970_sja1000_resources[] = { }, }; -struct sja1000_platform_data pcm970_sja1000_platform_data = { +static struct sja1000_platform_data pcm970_sja1000_platform_data = { .osc_freq = 16000000, .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, .cdr = CDR_CBP, diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 9c929b09310c..208ff640698d 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -3,11 +3,57 @@ * Copyright 2012-2013 Freescale Semiconductor, Inc. */ +#include #include +#include + #include #include #include +#include "common.h" +#include "hardware.h" + +#define MSCM_CPxCOUNT 0x00c +#define MSCM_CPxCFG1 0x014 + +static void __init vf610_detect_cpu(void) +{ + struct device_node *np; + u32 cpxcount, cpxcfg1; + unsigned int cpu_type; + void __iomem *mscm; + + np = of_find_compatible_node(NULL, NULL, "fsl,vf610-mscm-cpucfg"); + if (WARN_ON(!np)) + return; + + mscm = of_iomap(np, 0); + of_node_put(np); + + if (WARN_ON(!mscm)) + return; + + cpxcount = readl_relaxed(mscm + MSCM_CPxCOUNT); + cpxcfg1 = readl_relaxed(mscm + MSCM_CPxCFG1); + + iounmap(mscm); + + cpu_type = cpxcount ? MXC_CPU_VF600 : MXC_CPU_VF500; + + if (cpxcfg1) + cpu_type |= MXC_CPU_VFx10; + + mxc_set_cpu_type(cpu_type); +} + +static void __init vf610_init_machine(void) +{ + vf610_detect_cpu(); + + of_platform_default_populate(NULL, NULL, NULL); +} + static const char * const vf610_dt_compat[] __initconst = { "fsl,vf500", "fsl,vf510", @@ -20,5 +66,6 @@ static const char * const vf610_dt_compat[] __initconst = { DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, + .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 2bfd2d59b4a6..fe2d0f5abfcc 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -8,35 +8,15 @@ #define __ASM_ARCH_MXC_H__ #include +#include #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #error "Do not include directly." #endif -#define MXC_CPU_MX1 1 -#define MXC_CPU_MX21 21 -#define MXC_CPU_MX25 25 -#define MXC_CPU_MX27 27 -#define MXC_CPU_MX31 31 -#define MXC_CPU_MX35 35 -#define MXC_CPU_MX51 51 -#define MXC_CPU_MX53 53 -#define MXC_CPU_IMX6SL 0x60 -#define MXC_CPU_IMX6DL 0x61 -#define MXC_CPU_IMX6SX 0x62 -#define MXC_CPU_IMX6Q 0x63 -#define MXC_CPU_IMX6UL 0x64 -#define MXC_CPU_IMX6ULL 0x65 -/* virtual cpu id for i.mx6ulz */ -#define MXC_CPU_IMX6ULZ 0x6b -#define MXC_CPU_IMX6SLL 0x67 -#define MXC_CPU_IMX7D 0x72 -#define MXC_CPU_IMX7ULP 0xff - #define IMX_DDR_TYPE_LPDDR2 1 #ifndef __ASSEMBLY__ -extern unsigned int __mxc_cpu_type; #ifdef CONFIG_SOC_IMX6SL static inline bool cpu_is_imx6sl(void) diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 982eabc36163..7a9808b01763 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -3,7 +3,8 @@ menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA - select COMMON_CLK_VERSATILE + select CMA + select DMA_CMA select HAVE_TCM select ICST select MFD_SYSCON @@ -12,7 +13,6 @@ menuconfig ARCH_INTEGRATOR select POWER_RESET_VERSATILE select POWER_SUPPLY select SOC_INTEGRATOR_CM - select SPARSE_IRQ select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -35,14 +35,13 @@ config INTEGRATOR_IMPD1 select ARM_VIC select GPIO_PL061 select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. The IM-PD1 can be found on the Integrator/PP2 platform. - To compile this driver as a module, choose M here: the - module will be called impd1. - config INTEGRATOR_CM7TDMI bool "Integrator/CM7TDMI core module" depends on ARCH_INTEGRATOR_AP diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 71b97ffe8d32..7857a55c90b0 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -5,7 +5,6 @@ # Object file lists. -obj-y := core.o lm.o +obj-y := core.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o -obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c deleted file mode 100644 index 6f875ded8419..000000000000 --- a/arch/arm/mach-integrator/impd1.c +++ /dev/null @@ -1,475 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-integrator/impd1.c - * - * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. - * - * This file provides the core support for the IM-PD1 module. - * - * Module / boot parameters. - * lmid=n impd1.lmid=n - set the logic module position in stack to 'n' - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "lm.h" -#include "impd1.h" - -static int module_id; - -module_param_named(lmid, module_id, int, 0444); -MODULE_PARM_DESC(lmid, "logic module stack position"); - -struct impd1_module { - void __iomem *base; - void __iomem *vic_base; -}; - -void impd1_tweak_control(struct device *dev, u32 mask, u32 val) -{ - struct impd1_module *impd1 = dev_get_drvdata(dev); - u32 cur; - - val &= mask; - cur = readl(impd1->base + IMPD1_CTRL) & ~mask; - writel(cur | val, impd1->base + IMPD1_CTRL); -} - -EXPORT_SYMBOL(impd1_tweak_control); - -/* - * MMC support - */ -static struct mmci_platform_data mmc_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -}; - -/* - * CLCD support - */ -#define PANEL PROSPECTOR - -#define LTM10C209 1 -#define PROSPECTOR 2 -#define SVGA 3 -#define VGA 4 - -#if PANEL == VGA -#define PANELTYPE vga -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .connector = IMPD1_CTRL_DISP_VGA, - .bpp = 16, - .grayscale = 0, -}; - -#elif PANEL == SVGA -#define PANELTYPE svga -static struct clcd_panel svga = { - .mode = { - .name = "SVGA", - .refresh = 0, - .xres = 800, - .yres = 600, - .pixclock = 27778, - .left_margin = 20, - .right_margin = 20, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 164, - .vsync_len = 62, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .connector = IMPD1_CTRL_DISP_VGA, - .caps = CLCD_CAP_5551, - .bpp = 16, - .grayscale = 0, -}; - -#elif PANEL == PROSPECTOR -#define PANELTYPE prospector -static struct clcd_panel prospector = { - .mode = { - .name = "PROSPECTOR", - .refresh = 0, - .xres = 640, - .yres = 480, - .pixclock = 40000, - .left_margin = 33, - .right_margin = 64, - .upper_margin = 36, - .lower_margin = 7, - .hsync_len = 64, - .vsync_len = 25, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .fixedtimings = 1, - .connector = IMPD1_CTRL_DISP_LCD, - .bpp = 16, - .grayscale = 0, -}; - -#elif PANEL == LTM10C209 -#define PANELTYPE ltm10c209 -/* - * Untested. - */ -static struct clcd_panel ltm10c209 = { - .mode = { - .name = "LTM10C209", - .refresh = 0, - .xres = 640, - .yres = 480, - .pixclock = 40000, - .left_margin = 20, - .right_margin = 20, - .upper_margin = 19, - .lower_margin = 19, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .fixedtimings = 1, - .connector = IMPD1_CTRL_DISP_LCD, - .bpp = 16, - .grayscale = 0, -}; -#endif - -/* - * Disable all display connectors on the interface module. - */ -static void impd1fb_clcd_disable(struct clcd_fb *fb) -{ - impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0); -} - -/* - * Enable the relevant connector on the interface module. - */ -static void impd1fb_clcd_enable(struct clcd_fb *fb) -{ - impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, - fb->panel->connector | IMPD1_CTRL_DISP_ENABLE); -} - -static int impd1fb_clcd_setup(struct clcd_fb *fb) -{ - unsigned long framebase = fb->dev->res.start + 0x01000000; - unsigned long framesize = SZ_1M; - int ret = 0; - - fb->panel = &PANELTYPE; - - if (!request_mem_region(framebase, framesize, "clcd framebuffer")) { - printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n"); - return -EBUSY; - } - - fb->fb.screen_base = ioremap(framebase, framesize); - if (!fb->fb.screen_base) { - printk(KERN_ERR "IM-PD1: unable to map framebuffer\n"); - ret = -ENOMEM; - goto free_buffer; - } - - fb->fb.fix.smem_start = framebase; - fb->fb.fix.smem_len = framesize; - - return 0; - - free_buffer: - release_mem_region(framebase, framesize); - return ret; -} - -static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - unsigned long start, size; - - start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT); - size = vma->vm_end - vma->vm_start; - - return remap_pfn_range(vma, vma->vm_start, start, size, - vma->vm_page_prot); -} - -static void impd1fb_clcd_remove(struct clcd_fb *fb) -{ - iounmap(fb->fb.screen_base); - release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static struct clcd_board impd1_clcd_data = { - .name = "IM-PD/1", - .caps = CLCD_CAP_5551 | CLCD_CAP_888, - .check = clcdfb_check, - .decode = clcdfb_decode, - .disable = impd1fb_clcd_disable, - .enable = impd1fb_clcd_enable, - .setup = impd1fb_clcd_setup, - .mmap = impd1fb_clcd_mmap, - .remove = impd1fb_clcd_remove, -}; - -struct impd1_device { - unsigned long offset; - unsigned int irq[2]; - unsigned int id; - void *platform_data; -}; - -static struct impd1_device impd1_devs[] = { - { - .offset = 0x00100000, - .irq = { 1 }, - .id = 0x00141011, - }, { - .offset = 0x00200000, - .irq = { 2 }, - .id = 0x00141011, - }, { - .offset = 0x00300000, - .irq = { 3 }, - .id = 0x00041022, - }, { - .offset = 0x00400000, - .irq = { 4 }, - .id = 0x00041061, - }, { - .offset = 0x00500000, - .irq = { 5 }, - .id = 0x00041061, - }, { - .offset = 0x00600000, - .irq = { 6 }, - .id = 0x00041130, - }, { - .offset = 0x00700000, - .irq = { 7, 8 }, - .id = 0x00041181, - .platform_data = &mmc_data, - }, { - .offset = 0x00800000, - .irq = { 9 }, - .id = 0x00041041, - }, { - .offset = 0x01000000, - .irq = { 11 }, - .id = 0x00041110, - .platform_data = &impd1_clcd_data, - } -}; - -/* - * Valid IRQs: 0 thru 9 and 11, 10 unused. - */ -#define IMPD1_VALID_IRQS 0x00000bffU - -/* - * As this module is bool, it is OK to have this as __ref() - no - * probe calls will be done after the initial system bootup, as devices - * are discovered as part of the machine startup. - */ -static int __ref impd1_probe(struct lm_device *dev) -{ - struct impd1_module *impd1; - int irq_base; - int i; - - if (dev->id != module_id) - return -EINVAL; - - if (!devm_request_mem_region(&dev->dev, dev->resource.start, - SZ_4K, "LM registers")) - return -EBUSY; - - impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module), - GFP_KERNEL); - if (!impd1) - return -ENOMEM; - - impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K); - if (!impd1->base) - return -ENOMEM; - - integrator_impd1_clk_init(impd1->base, dev->id); - - if (!devm_request_mem_region(&dev->dev, - dev->resource.start + 0x03000000, - SZ_4K, "VIC")) - return -EBUSY; - - impd1->vic_base = devm_ioremap(&dev->dev, - dev->resource.start + 0x03000000, - SZ_4K); - if (!impd1->vic_base) - return -ENOMEM; - - irq_base = vic_init_cascaded(impd1->vic_base, dev->irq, - IMPD1_VALID_IRQS, 0); - - lm_set_drvdata(dev, impd1); - - dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n", - (unsigned long)dev->resource.start); - - for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { - struct impd1_device *idev = impd1_devs + i; - struct amba_device *d; - unsigned long pc_base; - char devname[32]; - int irq1 = idev->irq[0]; - int irq2 = idev->irq[1]; - - /* Translate IRQs to IM-PD1 local numberspace */ - if (irq1) - irq1 += irq_base; - if (irq2) - irq2 += irq_base; - - pc_base = dev->resource.start + idev->offset; - snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); - - /* Add GPIO descriptor lookup table for the PL061 block */ - if (idev->offset == 0x00400000) { - struct gpiod_lookup_table *lookup; - char *chipname; - char *mmciname; - - lookup = devm_kzalloc(&dev->dev, - struct_size(lookup, table, 3), - GFP_KERNEL); - chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); - mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL, - "lm%x:00700", dev->id); - if (!lookup || !chipname || !mmciname) - return -ENOMEM; - - lookup->dev_id = mmciname; - /* - * Offsets on GPIO block 1: - * 3 = MMC WP (write protect) - * 4 = MMC CD (card detect) - * - * Offsets on GPIO block 2: - * 0 = Up key - * 1 = Down key - * 2 = Left key - * 3 = Right key - * 4 = Key lower left - * 5 = Key lower right - */ - /* We need the two MMCI GPIO entries */ - lookup->table[0] = (struct gpiod_lookup) - GPIO_LOOKUP(chipname, 3, "wp", 0); - lookup->table[1] = (struct gpiod_lookup) - GPIO_LOOKUP(chipname, 4, "cd", GPIO_ACTIVE_LOW); - gpiod_add_lookup_table(lookup); - } - - d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, - irq1, irq2, - idev->platform_data, idev->id, - &dev->resource); - if (IS_ERR(d)) { - dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d)); - continue; - } - } - - return 0; -} - -static int impd1_remove_one(struct device *dev, void *data) -{ - device_unregister(dev); - return 0; -} - -static void impd1_remove(struct lm_device *dev) -{ - device_for_each_child(&dev->dev, NULL, impd1_remove_one); - integrator_impd1_clk_exit(dev->id); - - lm_set_drvdata(dev, NULL); -} - -static struct lm_driver impd1_driver = { - .drv = { - .name = "impd1", - /* - * As we're dropping the probe() function, suppress driver - * binding from sysfs. - */ - .suppress_bind_attrs = true, - }, - .probe = impd1_probe, - .remove = impd1_remove, -}; - -static int __init impd1_init(void) -{ - return lm_driver_register(&impd1_driver); -} - -static void __exit impd1_exit(void) -{ - lm_driver_unregister(&impd1_driver); -} - -module_init(impd1_init); -module_exit(impd1_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver"); -MODULE_AUTHOR("Deep Blue Solutions Ltd"); diff --git a/arch/arm/mach-integrator/impd1.h b/arch/arm/mach-integrator/impd1.h deleted file mode 100644 index 36124d34c8f7..000000000000 --- a/arch/arm/mach-integrator/impd1.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#define IMPD1_LEDS 0x0c -#define IMPD1_INT 0x10 -#define IMPD1_SW 0x14 -#define IMPD1_CTRL 0x18 - -#define IMPD1_CTRL_DISP_LCD (0 << 0) -#define IMPD1_CTRL_DISP_VGA (1 << 0) -#define IMPD1_CTRL_DISP_LCD1 (2 << 0) -#define IMPD1_CTRL_DISP_ENABLE (1 << 2) -#define IMPD1_CTRL_DISP_MASK (7 << 0) - -struct device; - -void impd1_tweak_control(struct device *dev, u32 mask, u32 val); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 035069ea2c8b..58b02cbbea72 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -23,7 +23,6 @@ #include "hardware.h" #include "cm.h" #include "common.h" -#include "lm.h" /* Regmap to the AP system controller */ static struct regmap *ap_syscon_map; @@ -174,10 +173,7 @@ static const struct of_device_id ap_syscon_match[] = { static void __init ap_init_of(void) { - u32 sc_dec; struct device_node *syscon; - int ret; - int i; of_platform_default_populate(NULL, ap_auxdata_lookup, NULL); @@ -189,33 +185,6 @@ static void __init ap_init_of(void) pr_crit("could not find Integrator/AP system controller\n"); return; } - - ret = regmap_read(ap_syscon_map, - INTEGRATOR_SC_DEC_OFFSET, - &sc_dec); - if (ret) { - pr_crit("could not read from Integrator/AP syscon\n"); - return; - } - - for (i = 0; i < 4; i++) { - struct lm_device *lmdev; - - if ((sc_dec & (16 << i)) == 0) - continue; - - lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); - if (!lmdev) - continue; - - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; - lmdev->resource.end = lmdev->resource.start + 0x0fffffff; - lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = irq_of_parse_and_map(syscon, i); - lmdev->id = i; - - lm_device_register(lmdev); - } } static const char * ap_dt_board_compat[] = { diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c deleted file mode 100644 index 55cd173d1d76..000000000000 --- a/arch/arm/mach-integrator/lm.c +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-integrator/lm.c - * - * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. - */ -#include -#include -#include -#include - -#include "lm.h" - -#define to_lm_device(d) container_of(d, struct lm_device, dev) -#define to_lm_driver(d) container_of(d, struct lm_driver, drv) - -static int lm_match(struct device *dev, struct device_driver *drv) -{ - return 1; -} - -static int lm_bus_probe(struct device *dev) -{ - struct lm_device *lmdev = to_lm_device(dev); - struct lm_driver *lmdrv = to_lm_driver(dev->driver); - - return lmdrv->probe(lmdev); -} - -static int lm_bus_remove(struct device *dev) -{ - struct lm_device *lmdev = to_lm_device(dev); - struct lm_driver *lmdrv = to_lm_driver(dev->driver); - - if (lmdrv->remove) - lmdrv->remove(lmdev); - return 0; -} - -static struct bus_type lm_bustype = { - .name = "logicmodule", - .match = lm_match, - .probe = lm_bus_probe, - .remove = lm_bus_remove, -// .suspend = lm_bus_suspend, -// .resume = lm_bus_resume, -}; - -static int __init lm_init(void) -{ - return bus_register(&lm_bustype); -} - -postcore_initcall(lm_init); - -int lm_driver_register(struct lm_driver *drv) -{ - drv->drv.bus = &lm_bustype; - return driver_register(&drv->drv); -} - -void lm_driver_unregister(struct lm_driver *drv) -{ - driver_unregister(&drv->drv); -} - -static void lm_device_release(struct device *dev) -{ - struct lm_device *d = to_lm_device(dev); - - kfree(d); -} - -int lm_device_register(struct lm_device *dev) -{ - int ret; - - dev->dev.release = lm_device_release; - dev->dev.bus = &lm_bustype; - - ret = dev_set_name(&dev->dev, "lm%d", dev->id); - if (ret) - return ret; - dev->resource.name = dev_name(&dev->dev); - - ret = request_resource(&iomem_resource, &dev->resource); - if (ret == 0) { - ret = device_register(&dev->dev); - if (ret) - release_resource(&dev->resource); - } - return ret; -} - -EXPORT_SYMBOL(lm_driver_register); -EXPORT_SYMBOL(lm_driver_unregister); diff --git a/arch/arm/mach-integrator/lm.h b/arch/arm/mach-integrator/lm.h deleted file mode 100644 index 172966a699bd..000000000000 --- a/arch/arm/mach-integrator/lm.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -struct lm_device { - struct device dev; - struct resource resource; - unsigned int irq; - unsigned int id; -}; - -struct lm_driver { - struct device_driver drv; - int (*probe)(struct lm_device *); - void (*remove)(struct lm_device *); - int (*suspend)(struct lm_device *, pm_message_t); - int (*resume)(struct lm_device *); -}; - -int lm_driver_register(struct lm_driver *drv); -void lm_driver_unregister(struct lm_driver *drv); - -int lm_device_register(struct lm_device *dev); - -#define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev) -#define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d) diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index f6f102fa9e23..e6e9f93a1f01 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index b58a03b18bde..6fe1550f43ec 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -110,7 +110,6 @@ config MACH_MMP_DT depends on ARCH_MULTI_V5 select PINCTRL select PINCTRL_SINGLE - select COMMON_CLK select ARCH_HAS_RESET_CONTROLLER select CPU_MOHAWK help diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 91214996acec..3f43c0867dca 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -8,7 +8,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 510c762ddc48..34a5fe4b3949 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 7a5629b9bede..34dbeaab94b0 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -47,7 +47,6 @@ config MACH_ARMADA_375 select ARMADA_375_CLK select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 help @@ -66,7 +65,6 @@ config MACH_ARMADA_38X select ARMADA_38X_CLK select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X help @@ -82,7 +80,6 @@ config MACH_ARMADA_39X select CACHE_L2X0 select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_39X help diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dca7d06c0b93..ea23205bf70f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -66,7 +66,6 @@ config SOC_AM43XX select ARCH_OMAP2PLUS select ARM_GIC select MACH_OMAP_GENERIC - select MIGHT_HAVE_CACHE_L2X0 select HAVE_ARM_SCU select GENERIC_CLOCKEVENTS_BROADCAST select HAVE_ARM_TWD diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 5017a3be0ff0..732e614c56b2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-omap/include # Common support -obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \ +obj-y := id.o io.o control.o devices.o fb.o pm.o \ common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o omap-headsmp.o sram.o @@ -46,6 +46,10 @@ obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) sleep44xx.o +omap5-dra7-common-$(CONFIG_SOC_HAS_REALTIME_COUNTER) = timer.o +obj-$(CONFIG_SOC_OMAP5) += $(omap5-dra7-common-y) +obj-$(CONFIG_SOC_DRA7XX) += $(omap5-dra7-common-y) + # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o obj-$(CONFIG_SOC_OMAP2430) += sram243x.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index ff992f8895ee..334923d7652d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,20 @@ static void __init __maybe_unused omap_generic_init(void) omap_soc_device_init(); } +/* Clocks are needed early, see drivers/clocksource for the rest */ +void __init __maybe_unused omap_init_time_of(void) +{ + omap_clk_init(); + timer_probe(); +} + +/* Used by am437x for ARM timer in non-SMP configurations */ +#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +void tick_broadcast(const struct cpumask *mask) +{ +} +#endif + #ifdef CONFIG_SOC_OMAP2420 static const char *const omap242x_boards_compat[] __initconst = { "ti,omap2420", @@ -42,7 +57,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_machine = omap_generic_init, - .init_time = omap_init_time, + .init_time = omap_init_time_of, .dt_compat = omap242x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -59,7 +74,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_machine = omap_generic_init, - .init_time = omap_init_time, + .init_time = omap_init_time_of, .dt_compat = omap243x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -106,7 +121,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap_init_time, + .init_time = omap_init_time_of, .dt_compat = n900_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -124,7 +139,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap_init_time, + .init_time = omap_init_time_of, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -141,7 +156,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .init_early = omap3630_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap_init_time, + .init_time = omap_init_time_of, .dt_compat = omap36xx_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -158,7 +173,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_secure_sync32k_timer_init, + .init_time = omap_init_time_of, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -174,7 +189,7 @@ DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") .init_early = am35xx_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_gptimer_timer_init, + .init_time = omap_init_time_of, .dt_compat = am3517_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -193,7 +208,7 @@ DT_MACHINE_START(TI814X_DT, "Generic ti814x (Flattened Device Tree)") .init_early = ti814x_init_early, .init_machine = omap_generic_init, .init_late = ti81xx_init_late, - .init_time = omap3_gptimer_timer_init, + .init_time = omap_init_time_of, .dt_compat = ti814x_boards_compat, .restart = ti81xx_restart, MACHINE_END @@ -210,7 +225,7 @@ DT_MACHINE_START(TI816X_DT, "Generic ti816x (Flattened Device Tree)") .init_early = ti816x_init_early, .init_machine = omap_generic_init, .init_late = ti81xx_init_late, - .init_time = omap3_gptimer_timer_init, + .init_time = omap_init_time_of, .dt_compat = ti816x_boards_compat, .restart = ti81xx_restart, MACHINE_END @@ -228,7 +243,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_early = am33xx_init_early, .init_machine = omap_generic_init, .init_late = am33xx_init_late, - .init_time = omap3_gptimer_timer_init, + .init_time = omap_init_time_of, .dt_compat = am33xx_boards_compat, .restart = am33xx_restart, MACHINE_END @@ -253,7 +268,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, .init_late = omap4430_init_late, - .init_time = omap4_local_timer_init, + .init_time = omap_init_time_of, .dt_compat = omap4_boards_compat, .restart = omap44xx_restart, MACHINE_END @@ -300,7 +315,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap3_gptimer_timer_init, + .init_time = omap_init_time_of, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 6005c4ed3bc6..8285be7c1eab 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -214,7 +214,7 @@ static struct clockdomain l4_secure_44xx_clkdm = { .dep_bit = OMAP4430_L4SEC_STATDEP_SHIFT, .wkdep_srcs = l4_secure_wkup_sleep_deps, .sleepdep_srcs = l4_secure_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l4_per_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/clockdomains54xx_data.c b/arch/arm/mach-omap2/clockdomains54xx_data.c index 3ab41fc89dd3..5611e08018a2 100644 --- a/arch/arm/mach-omap2/clockdomains54xx_data.c +++ b/arch/arm/mach-omap2/clockdomains54xx_data.c @@ -170,7 +170,7 @@ static struct clockdomain l4sec_54xx_clkdm = { .dep_bit = OMAP54XX_L4SEC_STATDEP_SHIFT, .wkdep_srcs = l4sec_wkup_sleep_deps, .sleepdep_srcs = l4sec_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain iva_54xx_clkdm = { diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 75d729943958..49926eced5f1 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -111,7 +111,14 @@ static inline int omap_l2_cache_init(void) #define OMAP_L2C_AUX_CTRL 0 #define omap4_l2c310_write_sec NULL #endif + +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER extern void omap5_realtime_timer_init(void); +#else +static inline void omap5_realtime_timer_init(void) +{ +} +#endif void omap2420_init_early(void); void omap2430_init_early(void); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 6a82fce3f822..570a987e6d1a 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -72,7 +72,7 @@ void __iomem *omap4_get_scu_base(void) } #ifdef CONFIG_OMAP5_ERRATA_801819 -void omap5_erratum_workaround_801819(void) +static void omap5_erratum_workaround_801819(void) { u32 acr, revidr; u32 acr_mask; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b14442cf6179..558fae4375ba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -264,14 +264,6 @@ static struct omap_hwmod_ocp_if omap2420_l3__dsp = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = { - .master = &omap2xxx_l4_wkup_hwmod, - .slave = &omap2xxx_timer1_hwmod, - .clk = "gpt1_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { .master = &omap2xxx_l4_wkup_hwmod, @@ -352,15 +344,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = { .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; - -/* l4_wkup -> 32ksync_counter */ -static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = { - .master = &omap2xxx_l4_wkup_hwmod, - .slave = &omap2xxx_counter_32k_hwmod, - .clk = "sync_32k_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if omap2420_l3__gpmc = { .master = &omap2xxx_l3_main_hwmod, .slave = &omap2xxx_gpmc_hwmod, @@ -382,8 +365,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__i2c2, &omap2420_l3__iva, &omap2420_l3__dsp, - &omap2420_l4_wkup__timer1, - &omap2xxx_l4_core__timer2, &omap2xxx_l4_core__timer3, &omap2xxx_l4_core__timer4, &omap2xxx_l4_core__timer5, @@ -411,7 +392,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l4_core__sham, &omap2xxx_l4_core__aes, &omap2420_l4_core__hdq1w, - &omap2420_l4_wkup__counter_32k, &omap2420_l3__gpmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 41a37c74f9a6..c93200801b34 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -436,14 +436,6 @@ static struct omap_hwmod_ocp_if omap2430_l3__iva = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = { - .master = &omap2xxx_l4_wkup_hwmod, - .slave = &omap2xxx_timer1_hwmod, - .clk = "gpt1_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { .master = &omap2xxx_l4_wkup_hwmod, @@ -548,14 +540,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = { .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; -/* l4_wkup -> 32ksync_counter */ -static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = { - .master = &omap2xxx_l4_wkup_hwmod, - .slave = &omap2xxx_counter_32k_hwmod, - .clk = "sync_32k_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if omap2430_l3__gpmc = { .master = &omap2xxx_l3_main_hwmod, .slave = &omap2xxx_gpmc_hwmod, @@ -581,8 +565,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l4_core__mcspi2, &omap2430_l4_core__mcspi3, &omap2430_l3__iva, - &omap2430_l4_wkup__timer1, - &omap2xxx_l4_core__timer2, &omap2xxx_l4_core__timer3, &omap2xxx_l4_core__timer4, &omap2xxx_l4_core__timer5, @@ -613,7 +595,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l4_core__rng, &omap2xxx_l4_core__sham, &omap2xxx_l4_core__aes, - &omap2430_l4_wkup__counter_32k, &omap2430_l3__gpmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index eef96adea411..518e877bb2a1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -95,14 +95,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_core -> timer2 */ -struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = { - .master = &omap2xxx_l4_core_hwmod, - .slave = &omap2xxx_timer2_hwmod, - .clk = "gpt2_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_core -> timer3 */ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = { .master = &omap2xxx_l4_core_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index a445704d43d9..9156f2bfbc8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -195,36 +195,6 @@ struct omap_hwmod omap2xxx_iva_hwmod = { .class = &iva_hwmod_class, }; -/* timer1 */ -struct omap_hwmod omap2xxx_timer1_hwmod = { - .name = "timer1", - .main_clk = "gpt1_fck", - .prcm = { - .omap2 = { - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, - }, - }, - .class = &omap2xxx_timer_hwmod_class, - .flags = HWMOD_SET_DEFAULT_CLOCKACT, -}; - -/* timer2 */ -struct omap_hwmod omap2xxx_timer2_hwmod = { - .name = "timer2", - .main_clk = "gpt2_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, - }, - }, - .class = &omap2xxx_timer_hwmod_class, - .flags = HWMOD_SET_DEFAULT_CLOCKACT, -}; - /* timer3 */ struct omap_hwmod omap2xxx_timer3_hwmod = { .name = "timer3", @@ -595,23 +565,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = { .class = &omap2xxx_mcspi_class, }; -static struct omap_hwmod_class omap2xxx_counter_hwmod_class = { - .name = "counter", -}; - -struct omap_hwmod omap2xxx_counter_32k_hwmod = { - .name = "counter_32k", - .main_clk = "func_32k_ck", - .prcm = { - .omap2 = { - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_32KSYNC_SHIFT, - }, - }, - .class = &omap2xxx_counter_hwmod_class, -}; - /* gpmc */ struct omap_hwmod omap2xxx_gpmc_hwmod = { .name = "gpmc", diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index fa2ff41f84b9..5f4ab24dd60d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -44,8 +44,6 @@ extern struct omap_hwmod am33xx_smartreflex0_hwmod; extern struct omap_hwmod am33xx_smartreflex1_hwmod; extern struct omap_hwmod am33xx_gpmc_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; -extern struct omap_hwmod am33xx_timer1_hwmod; -extern struct omap_hwmod am33xx_timer2_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 0ebbfbb4fb1c..b389d6589c32 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -106,14 +106,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .user = OCP_USER_MPU, }; -/* l4 per -> timer2 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l3 main -> ocmc */ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .master = &am33xx_l3_main_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index dca5a3a7b97c..4b3cd590fb52 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -307,72 +307,12 @@ struct omap_hwmod am33xx_rtc_hwmod = { }, }; -/* 'timer 2-7' class */ -static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_RESET_STATUS, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -struct omap_hwmod_class am33xx_timer_hwmod_class = { - .name = "timer", - .sysc = &am33xx_timer_sysc, -}; - -/* timer1 1ms */ -static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = { - .name = "timer", - .sysc = &am33xx_timer1ms_sysc, -}; - -struct omap_hwmod am33xx_timer1_hwmod = { - .name = "timer1", - .class = &am33xx_timer1ms_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "timer1_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_timer2_hwmod = { - .name = "timer2", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer2_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - static void omap_hwmod_am33xx_clkctrl(void) { - CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex0_hwmod, AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); @@ -399,12 +339,10 @@ void omap_hwmod_am33xx_reg(void) static void omap_hwmod_am43xx_clkctrl(void) { - CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex0_hwmod, AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index c64b735c8acc..3cf9c4c90b18 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -265,14 +265,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -/* l4 wkup -> timer1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_timer1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__emif, &am33xx_mpu__l3_main, @@ -291,9 +283,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__control, &am33xx_l4_wkup__smartreflex0, &am33xx_l4_wkup__smartreflex1, - &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, - &am33xx_l4_ls__timer2, &am33xx_l3_s__gpmc, &am33xx_l3_main__ocmc, NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 3c8d2b6e887a..ca02f91237e3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -147,36 +147,6 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { .sysc = &omap3xxx_timer_sysc, }; -/* timer1 */ -static struct omap_hwmod omap3xxx_timer1_hwmod = { - .name = "timer1", - .main_clk = "gpt1_fck", - .prcm = { - .omap2 = { - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT, - }, - }, - .class = &omap3xxx_timer_hwmod_class, - .flags = HWMOD_SET_DEFAULT_CLOCKACT, -}; - -/* timer2 */ -static struct omap_hwmod omap3xxx_timer2_hwmod = { - .name = "timer2", - .main_clk = "gpt2_fck", - .prcm = { - .omap2 = { - .module_offs = OMAP3430_PER_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, - }, - }, - .class = &omap3xxx_timer_hwmod_class, - .flags = HWMOD_SET_DEFAULT_CLOCKACT, -}; - /* timer3 */ static struct omap_hwmod omap3xxx_timer3_hwmod = { .name = "timer3", @@ -312,21 +282,6 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; -/* timer12 */ -static struct omap_hwmod omap3xxx_timer12_hwmod = { - .name = "timer12", - .main_clk = "gpt12_fck", - .prcm = { - .omap2 = { - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT, - }, - }, - .class = &omap3xxx_timer_hwmod_class, - .flags = HWMOD_SET_DEFAULT_CLOCKACT, -}; - /* * 'wd_timer' class * 32-bit watchdog upward counter that generates a pulse on the reset pin on @@ -1524,38 +1479,6 @@ static struct omap_hwmod omap3xxx_sad2d_hwmod = { .class = &omap3xxx_sad2d_class, }; -/* - * '32K sync counter' class - * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock - */ -static struct omap_hwmod_class_sysconfig omap3xxx_counter_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0004, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_counter_hwmod_class = { - .name = "counter", - .sysc = &omap3xxx_counter_sysc, -}; - -static struct omap_hwmod omap3xxx_counter_32k_hwmod = { - .name = "counter_32k", - .class = &omap3xxx_counter_hwmod_class, - .clkdm_name = "wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "wkup_32k_fck", - .prcm = { - .omap2 = { - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT, - }, - }, -}; - /* * 'gpmc' class * general purpose memory controller @@ -1868,25 +1791,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3__iva = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; - -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = { - .master = &omap3xxx_l4_wkup_hwmod, - .slave = &omap3xxx_timer1_hwmod, - .clk = "gpt1_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - - -/* l4_per -> timer2 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer2_hwmod, - .clk = "gpt2_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - - /* l4_per -> timer3 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = { .master = &omap3xxx_l4_per_hwmod, @@ -1965,15 +1869,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; - -/* l4_core -> timer12 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = { - .master = &omap3xxx_l4_sec_hwmod, - .slave = &omap3xxx_timer12_hwmod, - .clk = "gpt12_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { @@ -2325,16 +2220,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = { .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; -/* l4_wkup -> 32ksync_counter */ - - -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { - .master = &omap3xxx_l4_wkup_hwmod, - .slave = &omap3xxx_counter_32k_hwmod, - .clk = "omap_32ksync_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* am35xx has Davinci MDIO & EMAC */ static struct omap_hwmod_class am35xx_mdio_class = { .name = "davinci_mdio", @@ -2551,8 +2436,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3_l4_core__i2c2, &omap3_l4_core__i2c3, &omap3xxx_l4_wkup__l4_sec, - &omap3xxx_l4_wkup__timer1, - &omap3xxx_l4_per__timer2, &omap3xxx_l4_per__timer3, &omap3xxx_l4_per__timer4, &omap3xxx_l4_per__timer5, @@ -2580,27 +2463,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap34xx_l4_core__mcspi2, &omap34xx_l4_core__mcspi3, &omap34xx_l4_core__mcspi4, - &omap3xxx_l4_wkup__counter_32k, &omap3xxx_l3_main__gpmc, NULL, }; -/* GP-only hwmod links */ -static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = { - &omap3xxx_l4_sec__timer12, - NULL, -}; - -static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = { - &omap3xxx_l4_sec__timer12, - NULL, -}; - -static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = { - &omap3xxx_l4_sec__timer12, - NULL, -}; - /* crypto hwmod links */ static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__sham, @@ -2774,7 +2640,7 @@ static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus, int __init omap3xxx_hwmod_init(void) { int r; - struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL; + struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL; struct omap_hwmod_ocp_if **h_aes = NULL; struct device_node *bus; unsigned int rev; @@ -2797,18 +2663,15 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap34xx_hwmod_ocp_ifs; - h_gp = omap34xx_gp_hwmod_ocp_ifs; h_sham = omap34xx_sham_hwmod_ocp_ifs; h_aes = omap34xx_aes_hwmod_ocp_ifs; } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { h = am35xx_hwmod_ocp_ifs; - h_gp = am35xx_gp_hwmod_ocp_ifs; h_sham = am35xx_sham_hwmod_ocp_ifs; h_aes = am35xx_aes_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { h = omap36xx_hwmod_ocp_ifs; - h_gp = omap36xx_gp_hwmod_ocp_ifs; h_sham = omap36xx_sham_hwmod_ocp_ifs; h_aes = omap36xx_aes_hwmod_ocp_ifs; } else { @@ -2820,13 +2683,6 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; - /* Register GP-only hwmod links. */ - if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) { - r = omap_hwmod_register_links(h_gp); - if (r < 0) - return r; - } - /* * Register crypto hwmod links only if they are not disabled in DT. * If DT information is missing, enable them only for GP devices. diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index d2203f44af88..3f338732ee6c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -85,34 +85,6 @@ static struct omap_hwmod am43xx_control_hwmod = { }, }; -static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am43xx_synctimer_hwmod_class = { - .name = "synctimer", - .sysc = &am43xx_synctimer_sysc, -}; - -static struct omap_hwmod am43xx_synctimer_hwmod = { - .name = "counter_32k", - .class = &am43xx_synctimer_hwmod_class, - .clkdm_name = "l4_wkup_aon_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "synctimer_32kclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - - static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, @@ -206,20 +178,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_timer1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am43xx_synctimer_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = { .master = &am33xx_l3_s_hwmod, .slave = &am43xx_usb_otg_ss0_hwmod, @@ -235,7 +193,6 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = { }; static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { - &am33xx_l4_wkup__synctimer, &am33xx_mpu__l3_main, &am33xx_mpu__prcm, &am33xx_l3_s__l4_ls, @@ -252,8 +209,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__control, &am43xx_l4_wkup__smartreflex0, &am43xx_l4_wkup__smartreflex1, - &am43xx_l4_wkup__timer1, - &am33xx_l4_ls__timer2, &am33xx_l3_s__gpmc, &am33xx_l3_main__ocmc, &am43xx_l3_s__usbotgss0, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 33f6596c03f7..de13c46b984f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -231,39 +231,6 @@ static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = { * usim */ -/* - * 'counter' class - * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock - */ - -static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0004, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_counter_hwmod_class = { - .name = "counter", - .sysc = &omap44xx_counter_sysc, -}; - -/* counter_32k */ -static struct omap_hwmod omap44xx_counter_32k_hwmod = { - .name = "counter_32k", - .class = &omap44xx_counter_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "sys_32k_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET, - }, - }, -}; - /* * 'ctrl_module' class * attila core control module + core pad control module + wkup pad control @@ -672,45 +639,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = { }, }; -/* - * 'timer' class - * general purpose timer module with accurate 1ms tick - * This class contains several variants: ['timer_1ms', 'timer'] - */ - -static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap44xx_timer_1ms_sysc, -}; - -/* timer1 */ -static struct omap_hwmod omap44xx_timer1_hwmod = { - .name = "timer1", - .class = &omap44xx_timer_1ms_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dmt1_clk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* * 'usb_host_fs' class * full-speed usb host controller @@ -1063,14 +991,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> counter_32k */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_counter_32k_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> ctrl_module_core */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = { .master = &omap44xx_l4_cfg_hwmod, @@ -1199,14 +1119,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_timer1_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_host_fs */ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, @@ -1273,7 +1185,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, &omap44xx_l4_cfg__ctrl_module_pad_core, &omap44xx_l4_wkup__ctrl_module_wkup, @@ -1290,7 +1201,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, /* &omap44xx_l3_main_2__sl2if, */ - &omap44xx_l4_wkup__timer1, /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_tll_hs, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 08f34f4732fd..4cb194ac7a7e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -193,39 +193,6 @@ static struct omap_hwmod omap54xx_mpu_private_hwmod = { }, }; -/* - * 'counter' class - * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock - */ - -static struct omap_hwmod_class_sysconfig omap54xx_counter_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_counter_hwmod_class = { - .name = "counter", - .sysc = &omap54xx_counter_sysc, -}; - -/* counter_32k */ -static struct omap_hwmod omap54xx_counter_32k_hwmod = { - .name = "counter_32k", - .class = &omap54xx_counter_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "wkupaon_iclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET, - }, - }, -}; - /* * 'emif' class * external memory interface no1 (wrapper) @@ -299,44 +266,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { }, }; - -/* - * 'timer' class - * general purpose timer module with accurate 1ms tick - * This class contains several variants: ['timer_1ms', 'timer'] - */ - -static struct omap_hwmod_class_sysconfig omap54xx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap54xx_timer_1ms_sysc, -}; - -/* timer1 */ -static struct omap_hwmod omap54xx_timer1_hwmod = { - .name = "timer1", - .class = &omap54xx_timer_1ms_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "timer1_gfclk_mux", - .flags = HWMOD_SET_DEFAULT_CLOCKACT, - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* * 'usb_host_hs' class * high-speed multi-port usb host controller @@ -666,14 +595,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> counter_32k */ -static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = { - .master = &omap54xx_l4_wkup_hwmod, - .slave = &omap54xx_counter_32k_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { .master = &omap54xx_mpu_hwmod, @@ -698,14 +619,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = { - .master = &omap54xx_l4_wkup_hwmod, - .slave = &omap54xx_timer1_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_host_hs */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = { .master = &omap54xx_l4_cfg_hwmod, @@ -747,11 +660,9 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_2__l4_per, &omap54xx_l3_main_1__l4_wkup, &omap54xx_mpu__mpu_private, - &omap54xx_l4_wkup__counter_32k, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_cfg__mpu, - &omap54xx_l4_wkup__timer1, &omap54xx_l4_cfg__usb_host_hs, &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e95668bdbc3f..07b7458deae4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -221,40 +221,6 @@ static struct omap_hwmod dra7xx_bb2d_hwmod = { }, }; -/* - * 'counter' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_counter_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_counter_hwmod_class = { - .name = "counter", - .sysc = &dra7xx_counter_sysc, -}; - -/* counter_32k */ -static struct omap_hwmod dra7xx_counter_32k_hwmod = { - .name = "counter_32k", - .class = &dra7xx_counter_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "wkupaon_iclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET, - }, - }, -}; - /* * 'ctrl_module' class * @@ -525,103 +491,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { }, }; -/* - * 'timer' class - * - * This class contains several variants: ['timer_1ms', 'timer_secure', - * 'timer'] - */ - -static struct omap_hwmod_class_sysconfig dra7xx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &dra7xx_timer_1ms_sysc, -}; - -static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_timer_hwmod_class = { - .name = "timer", - .sysc = &dra7xx_timer_sysc, -}; - -/* timer1 */ -static struct omap_hwmod dra7xx_timer1_hwmod = { - .name = "timer1", - .class = &dra7xx_timer_1ms_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "timer1_gfclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* timer2 */ -static struct omap_hwmod dra7xx_timer2_hwmod = { - .name = "timer2", - .class = &dra7xx_timer_1ms_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "timer2_gfclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* timer3 */ -static struct omap_hwmod dra7xx_timer3_hwmod = { - .name = "timer3", - .class = &dra7xx_timer_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "timer3_gfclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* timer4 */ -static struct omap_hwmod dra7xx_timer4_hwmod = { - .name = "timer4", - .class = &dra7xx_timer_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "timer4_gfclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* * 'usb_otg_ss' class * @@ -864,14 +733,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> counter_32k */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__counter_32k = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_counter_32k_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_wkup -> ctrl_module_wkup */ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { .master = &dra7xx_l4_wkup_hwmod, @@ -952,38 +813,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer1 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_timer1_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> timer2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_timer2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> timer3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_timer3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> timer4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_timer4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per3 -> usb_otg_ss1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { .master = &dra7xx_l4_per3_hwmod, @@ -1062,7 +891,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__l4_wkup, &dra7xx_l4_per2__atl, &dra7xx_l3_main_1__bb2d, - &dra7xx_l4_wkup__counter_32k, &dra7xx_l4_wkup__ctrl_module_wkup, &dra7xx_l3_main_1__gpmc, &dra7xx_l4_cfg__mpu, @@ -1072,10 +900,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, &dra7xx_l4_cfg__sata, - &dra7xx_l4_wkup__timer1, - &dra7xx_l4_per1__timer2, - &dra7xx_l4_per1__timer3, - &dra7xx_l4_per1__timer4, &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 6a9f1ad9d413..50fb699b163f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -690,76 +690,6 @@ static struct omap_hwmod_class dm816x_timer_hwmod_class = { .sysc = &dm816x_timer_sysc, }; -static struct omap_hwmod dm814x_timer1_hwmod = { - .name = "timer1", - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "timer1_fck", - .class = &dm816x_timer_hwmod_class, - .flags = HWMOD_NO_IDLEST, -}; - -static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = { - .master = &dm81xx_l4_ls_hwmod, - .slave = &dm814x_timer1_hwmod, - .clk = "sysclk6_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod dm816x_timer1_hwmod = { - .name = "timer1", - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "timer1_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TIMER_1_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .class = &dm816x_timer_hwmod_class, -}; - -static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = { - .master = &dm81xx_l4_ls_hwmod, - .slave = &dm816x_timer1_hwmod, - .clk = "sysclk6_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod dm814x_timer2_hwmod = { - .name = "timer2", - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "timer2_fck", - .class = &dm816x_timer_hwmod_class, - .flags = HWMOD_NO_IDLEST, -}; - -static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = { - .master = &dm81xx_l4_ls_hwmod, - .slave = &dm814x_timer2_hwmod, - .clk = "sysclk6_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod dm816x_timer2_hwmod = { - .name = "timer2", - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "timer2_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TIMER_2_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .class = &dm816x_timer_hwmod_class, -}; - -static struct omap_hwmod_ocp_if dm816x_l4_ls__timer2 = { - .master = &dm81xx_l4_ls_hwmod, - .slave = &dm816x_timer2_hwmod, - .clk = "sysclk6_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod dm816x_timer3_hwmod = { .name = "timer3", .clkdm_name = "alwon_l3s_clkdm", @@ -1288,8 +1218,6 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, &ti81xx_l4_ls__rtc, - &dm814x_l4_ls__timer1, - &dm814x_l4_ls__timer2, &dm81xx_alwon_l3_slow__gpmc, &dm814x_default_l3_slow__usbss, &dm814x_alwon_l3_med__mmc3, @@ -1318,8 +1246,6 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__elm, &ti81xx_l4_ls__rtc, &dm816x_l4_ls__mmc1, - &dm816x_l4_ls__timer1, - &dm816x_l4_ls__timer2, &dm816x_l4_ls__timer3, &dm816x_l4_ls__timer4, &dm816x_l4_ls__timer5, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index c85cb8b5831c..0045e6680a63 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -21,8 +21,6 @@ extern struct omap_hwmod omap2xxx_l4_core_hwmod; extern struct omap_hwmod omap2xxx_l4_wkup_hwmod; extern struct omap_hwmod omap2xxx_mpu_hwmod; extern struct omap_hwmod omap2xxx_iva_hwmod; -extern struct omap_hwmod omap2xxx_timer1_hwmod; -extern struct omap_hwmod omap2xxx_timer2_hwmod; extern struct omap_hwmod omap2xxx_timer3_hwmod; extern struct omap_hwmod omap2xxx_timer4_hwmod; extern struct omap_hwmod omap2xxx_timer5_hwmod; @@ -47,7 +45,6 @@ extern struct omap_hwmod omap2xxx_gpio3_hwmod; extern struct omap_hwmod omap2xxx_gpio4_hwmod; extern struct omap_hwmod omap2xxx_mcspi1_hwmod; extern struct omap_hwmod omap2xxx_mcspi2_hwmod; -extern struct omap_hwmod omap2xxx_counter_32k_hwmod; extern struct omap_hwmod omap2xxx_gpmc_hwmod; extern struct omap_hwmod omap2xxx_rng_hwmod; extern struct omap_hwmod omap2xxx_sham_hwmod; diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 5455fc98c60e..58236c7dc83e 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -267,7 +267,7 @@ static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void) return NULL; } -void __iomem *am43xx_get_rtc_base_addr(void) +static void __iomem *am43xx_get_rtc_base_addr(void) { rtc_oh = omap_hwmod_lookup("rtc"); diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index ac1324c6453b..c4e97d35c310 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -72,7 +72,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r3, l2dis_3630_offset @ may be too distant for plain adr + adr r3, l2dis_3630_offset ldr r2, [r3] @ value for offset str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 8b09cdacc30d..620ba69c8f11 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -26,34 +26,12 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include -#include -#include -#include #include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "omap_hwmod.h" -#include "omap_device.h" -#include -#include #include "soc.h" #include "common.h" #include "control.h" -#include "powerdomain.h" #include "omap-secure.h" #define REALTIME_COUNTER_BASE 0x48243200 @@ -61,537 +39,12 @@ #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 #define NUMERATOR_DENUMERATOR_MASK 0xfffff000 -/* Clockevent code */ - -static struct omap_dm_timer clkev; -static struct clock_event_device clockevent_gpt; - -/* Clockevent hwmod for am335x and am437x suspend */ -static struct omap_hwmod *clockevent_gpt_hwmod; - -/* Clockesource hwmod for am437x suspend */ -static struct omap_hwmod *clocksource_gpt_hwmod; - -#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER static unsigned long arch_timer_freq; void set_cntfreq(void) { omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq); } -#endif - -static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_gpt; - - __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW); - - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static int omap2_gp_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, - 0xffffffff - cycles, OMAP_TIMER_POSTED); - - return 0; -} - -static int omap2_gp_timer_shutdown(struct clock_event_device *evt) -{ - __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); - return 0; -} - -static int omap2_gp_timer_set_periodic(struct clock_event_device *evt) -{ - u32 period; - - __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); - - period = clkev.rate / HZ; - period -= 1; - /* Looks like we need to first set the load value separately */ - __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period, - OMAP_TIMER_POSTED); - __omap_dm_timer_load_start(&clkev, - OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, OMAP_TIMER_POSTED); - return 0; -} - -static void omap_clkevt_idle(struct clock_event_device *unused) -{ - if (!clockevent_gpt_hwmod) - return; - - omap_hwmod_idle(clockevent_gpt_hwmod); -} - -static void omap_clkevt_unidle(struct clock_event_device *unused) -{ - if (!clockevent_gpt_hwmod) - return; - - omap_hwmod_enable(clockevent_gpt_hwmod); - __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); -} - -static struct clock_event_device clockevent_gpt = { - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = omap2_gp_timer_set_next_event, - .set_state_shutdown = omap2_gp_timer_shutdown, - .set_state_periodic = omap2_gp_timer_set_periodic, - .set_state_oneshot = omap2_gp_timer_shutdown, - .tick_resume = omap2_gp_timer_shutdown, -}; - -static const struct of_device_id omap_timer_match[] __initconst = { - { .compatible = "ti,omap2420-timer", }, - { .compatible = "ti,omap3430-timer", }, - { .compatible = "ti,omap4430-timer", }, - { .compatible = "ti,omap5430-timer", }, - { .compatible = "ti,dm814-timer", }, - { .compatible = "ti,dm816-timer", }, - { .compatible = "ti,am335x-timer", }, - { .compatible = "ti,am335x-timer-1ms", }, - { } -}; - -static int omap_timer_add_disabled_property(struct device_node *np) -{ - struct property *prop; - - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - if (!prop) - return -ENOMEM; - - prop->name = "status"; - prop->value = "disabled"; - prop->length = strlen(prop->value); - - return of_add_property(np, prop); -} - -static int omap_timer_update_dt(struct device_node *np) -{ - int error = 0; - - if (!of_device_is_compatible(np, "ti,omap-counter32k")) { - error = omap_timer_add_disabled_property(np); - if (error) - return error; - } - - /* No parent interconnect target module configured? */ - if (of_get_property(np, "ti,hwmods", NULL)) - return error; - - /* Tag parent interconnect target module disabled */ - error = omap_timer_add_disabled_property(np->parent); - if (error) - return error; - - return 0; -} - -/** - * omap_get_timer_dt - get a timer using device-tree - * @match - device-tree match structure for matching a device type - * @property - optional timer property to match - * - * Helper function to get a timer during early boot using device-tree for use - * as kernel system timer. Optionally, the property argument can be used to - * select a timer with a specific property. Once a timer is found then mark - * the timer node in device-tree as disabled, to prevent the kernel from - * registering this timer as a platform device and so no one else can use it. - */ -static struct device_node * __init omap_get_timer_dt(const struct of_device_id *match, - const char *property) -{ - struct device_node *np; - int error; - - for_each_matching_node(np, match) { - if (!of_device_is_available(np)) - continue; - - if (property && !of_get_property(np, property, NULL)) - continue; - - if (!property && (of_get_property(np, "ti,timer-alwon", NULL) || - of_get_property(np, "ti,timer-dsp", NULL) || - of_get_property(np, "ti,timer-pwm", NULL) || - of_get_property(np, "ti,timer-secure", NULL))) - continue; - - error = omap_timer_update_dt(np); - WARN(error, "%s: Could not update dt: %i\n", __func__, error); - - return np; - } - - return NULL; -} - -/** - * omap_dmtimer_init - initialisation function when device tree is used - * - * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure" - * cannot be used by the kernel as they are reserved. Therefore, to prevent the - * kernel registering these devices remove them dynamically from the device - * tree on boot. - */ -static void __init omap_dmtimer_init(void) -{ - struct device_node *np; - - if (!cpu_is_omap34xx() && !soc_is_dra7xx()) - return; - - /* If we are a secure device, remove any secure timer nodes */ - if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { - np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); - of_node_put(np); - } -} - -/** - * omap_dm_timer_get_errata - get errata flags for a timer - * - * Get the timer errata flags that are specific to the OMAP device being used. - */ -static u32 __init omap_dm_timer_get_errata(void) -{ - if (cpu_is_omap24xx()) - return 0; - - return OMAP_TIMER_ERRATA_I103_I767; -} - -static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, - const char *fck_source, - const char *property, - const char **timer_name, - int posted) -{ - const char *oh_name = NULL; - struct device_node *np; - struct omap_hwmod *oh; - struct clk *src; - int r = 0; - - np = omap_get_timer_dt(omap_timer_match, property); - if (!np) - return -ENODEV; - - of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); - if (!oh_name) { - of_property_read_string_index(np->parent, "ti,hwmods", 0, - &oh_name); - if (!oh_name) - return -ENODEV; - } - - timer->irq = irq_of_parse_and_map(np, 0); - if (!timer->irq) - return -ENXIO; - - timer->io_base = of_iomap(np, 0); - - timer->fclk = of_clk_get_by_name(np, "fck"); - - of_node_put(np); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) - return -ENODEV; - - *timer_name = oh->name; - - if (!timer->io_base) - return -ENXIO; - - omap_hwmod_setup_one(oh_name); - - /* After the dmtimer is using hwmod these clocks won't be needed */ - if (IS_ERR_OR_NULL(timer->fclk)) - timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); - if (IS_ERR(timer->fclk)) - return PTR_ERR(timer->fclk); - - src = clk_get(NULL, fck_source); - if (IS_ERR(src)) - return PTR_ERR(src); - - WARN(clk_set_parent(timer->fclk, src) < 0, - "Cannot set timer parent clock, no PLL clock driver?"); - - clk_put(src); - - omap_hwmod_enable(oh); - __omap_dm_timer_init_regs(timer); - - if (posted) - __omap_dm_timer_enable_posted(timer); - - /* Check that the intended posted configuration matches the actual */ - if (posted != timer->posted) - return -EINVAL; - - timer->rate = clk_get_rate(timer->fclk); - timer->reserved = 1; - - return r; -} - -#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) -void tick_broadcast(const struct cpumask *mask) -{ -} -#endif - -static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source, - const char *property) -{ - int res; - - clkev.id = gptimer_id; - clkev.errata = omap_dm_timer_get_errata(); - - /* - * For clock-event timers we never read the timer counter and - * so we are not impacted by errata i103 and i767. Therefore, - * we can safely ignore this errata for clock-event timers. - */ - __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); - - res = omap_dm_timer_init_one(&clkev, fck_source, property, - &clockevent_gpt.name, OMAP_TIMER_POSTED); - BUG_ON(res); - - if (request_irq(clkev.irq, omap2_gp_timer_interrupt, - IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev)) - pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq); - - __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); - - clockevent_gpt.cpumask = cpu_possible_mask; - clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev); - clockevents_config_and_register(&clockevent_gpt, clkev.rate, - 3, /* Timer internal resynch latency */ - 0xffffffff); - - if (soc_is_am33xx() || soc_is_am43xx()) { - clockevent_gpt.suspend = omap_clkevt_idle; - clockevent_gpt.resume = omap_clkevt_unidle; - - clockevent_gpt_hwmod = - omap_hwmod_lookup(clockevent_gpt.name); - } - - pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, - clkev.rate); -} - -/* Clocksource code */ -static struct omap_dm_timer clksrc; -static bool use_gptimer_clksrc __initdata; - -/* - * clocksource - */ -static u64 clocksource_read_cycles(struct clocksource *cs) -{ - return (u64)__omap_dm_timer_read_counter(&clksrc, - OMAP_TIMER_NONPOSTED); -} - -static struct clocksource clocksource_gpt = { - .rating = 300, - .read = clocksource_read_cycles, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static u64 notrace dmtimer_read_sched_clock(void) -{ - if (clksrc.reserved) - return __omap_dm_timer_read_counter(&clksrc, - OMAP_TIMER_NONPOSTED); - - return 0; -} - -static const struct of_device_id omap_counter_match[] __initconst = { - { .compatible = "ti,omap-counter32k", }, - { } -}; - -/* Setup free-running counter for clocksource */ -static int __init __maybe_unused omap2_sync32k_clocksource_init(void) -{ - int ret; - struct device_node *np = NULL; - struct omap_hwmod *oh; - const char *oh_name = "counter_32k"; - - /* - * See if the 32kHz counter is supported. - */ - np = omap_get_timer_dt(omap_counter_match, NULL); - if (!np) - return -ENODEV; - - of_property_read_string_index(np->parent, "ti,hwmods", 0, &oh_name); - if (!oh_name) { - of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); - if (!oh_name) - return -ENODEV; - } - - /* - * First check hwmod data is available for sync32k counter - */ - oh = omap_hwmod_lookup(oh_name); - if (!oh || oh->slaves_cnt == 0) - return -ENODEV; - - omap_hwmod_setup_one(oh_name); - - ret = omap_hwmod_enable(oh); - if (ret) { - pr_warn("%s: failed to enable counter_32k module (%d)\n", - __func__, ret); - return ret; - } - - return ret; -} - -static unsigned int omap2_gptimer_clksrc_load; - -static void omap2_gptimer_clksrc_suspend(struct clocksource *unused) -{ - omap2_gptimer_clksrc_load = - __omap_dm_timer_read_counter(&clksrc, OMAP_TIMER_NONPOSTED); - - omap_hwmod_idle(clocksource_gpt_hwmod); -} - -static void omap2_gptimer_clksrc_resume(struct clocksource *unused) -{ - omap_hwmod_enable(clocksource_gpt_hwmod); - - __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, - omap2_gptimer_clksrc_load, - OMAP_TIMER_NONPOSTED); -} - -static void __init omap2_gptimer_clocksource_init(int gptimer_id, - const char *fck_source, - const char *property) -{ - int res; - - clksrc.id = gptimer_id; - clksrc.errata = omap_dm_timer_get_errata(); - - res = omap_dm_timer_init_one(&clksrc, fck_source, property, - &clocksource_gpt.name, - OMAP_TIMER_NONPOSTED); - - if (soc_is_am43xx()) { - clocksource_gpt.suspend = omap2_gptimer_clksrc_suspend; - clocksource_gpt.resume = omap2_gptimer_clksrc_resume; - - clocksource_gpt_hwmod = - omap_hwmod_lookup(clocksource_gpt.name); - } - - BUG_ON(res); - - __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, - OMAP_TIMER_NONPOSTED); - sched_clock_register(dmtimer_read_sched_clock, 32, clksrc.rate); - - if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) - pr_err("Could not register clocksource %s\n", - clocksource_gpt.name); - else - pr_info("OMAP clocksource: %s at %lu Hz\n", - clocksource_gpt.name, clksrc.rate); -} - -static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src, - const char *clkev_prop, int clksrc_nr, const char *clksrc_src, - const char *clksrc_prop, bool gptimer) -{ - omap_clk_init(); - omap_dmtimer_init(); - omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop); - - /* Enable the use of clocksource="gp_timer" kernel parameter */ - if (clksrc_nr && (use_gptimer_clksrc || gptimer)) - omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src, - clksrc_prop); - else - omap2_sync32k_clocksource_init(); -} - -void __init omap_init_time(void) -{ - __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL, false); - - timer_probe(); -} - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) -void __init omap3_secure_sync32k_timer_init(void) -{ - __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure", - 2, "timer_sys_ck", NULL, false); - - timer_probe(); -} -#endif /* CONFIG_ARCH_OMAP3 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ - defined(CONFIG_SOC_AM43XX) -void __init omap3_gptimer_timer_init(void) -{ - __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, - 1, "timer_sys_ck", "ti,timer-alwon", true); - if (of_have_populated_dt()) - timer_probe(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) -static void __init omap4_sync32k_timer_init(void) -{ - __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", - 0, NULL, NULL, false); -} - -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); - timer_probe(); -} -#endif - -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) /* * The realtime counter also called master counter, is a free-running @@ -604,7 +57,6 @@ void __init omap4_local_timer_init(void) */ static void __init realtime_counter_init(void) { -#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void __iomem *base; static struct clk *sys_clk; unsigned long rate; @@ -703,39 +155,12 @@ sysclk1_based: set_cntfreq(); iounmap(base); -#endif } void __init omap5_realtime_timer_init(void) { - omap4_sync32k_timer_init(); + omap_clk_init(); realtime_counter_init(); timer_probe(); } -#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */ - -/** - * omap2_override_clocksource - clocksource override with user configuration - * - * Allows user to override default clocksource, using kernel parameter - * clocksource="gp_timer" (For all OMAP2PLUS architectures) - * - * Note that, here we are using same standard kernel parameter "clocksource=", - * and not introducing any OMAP specific interface. - */ -static int __init omap2_override_clocksource(char *str) -{ - if (!str) - return 0; - /* - * For OMAP architecture, we only have two options - * - sync_32k (default) - * - gp_timer (sys_clk based) - */ - if (!strcmp(str, "gp_timer")) - use_gptimer_clksrc = true; - - return 0; -} -early_param("clocksource", omap2_override_clocksource); diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 6f66785fab01..ea077f66372d 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -30,7 +30,6 @@ config ARCH_ATLAS7 select ARM_GIC select ATLAS7_TIMER select HAVE_ARM_SCU if SMP - select HAVE_SMP help Support for CSR SiRFSoC ARM Cortex A7 Platform diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f60bc29aef68..f7520a6cc7d4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -123,23 +123,6 @@ config CSB726_CSB701 bool "Enable support for CSB701 baseboard" depends on MACH_CSB726 -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI - select IWMMXT - select HAVE_PCI - select NEED_MACH_IO_H if PCI - select PXA25x - select PXA27x - -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" - select PXA27x - -config MACH_EXEDA - bool "CompuLab eXeda platform" - select PXA27x - config MACH_CM_X300 bool "CompuLab CM-X300 modules" select CPU_PXA300 diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f70728930c4f..177abe584dd5 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -40,11 +40,6 @@ obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o obj-$(CONFIG_MACH_BALLOON3) += balloon3.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o -ifeq ($(CONFIG_PCI),y) -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o -endif -obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c deleted file mode 100644 index ea1e85775759..000000000000 --- a/arch/arm/mach-pxa/cm-x255.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x255.c - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Mike Rapoport - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "pxa25x.h" - -#include "generic.h" - -#define GPIO_NAND_CS (5) -#define GPIO_NAND_ALE (4) -#define GPIO_NAND_CLE (3) -#define GPIO_NAND_RB (10) - -static unsigned long cmx255_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* SSP1 */ - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* SSP2 */ - GPIO81_SSP2_CLK_OUT, - GPIO82_SSP2_FRM_OUT, - GPIO83_SSP2_TXD, - GPIO84_SSP2_RXD, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO33_nCS_5, - GPIO18_RDY, - - /* GPIO */ - GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, - GPIO9_GPIO, /* PC card reset */ - - /* NAND controls */ - GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */ - GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */ - GPIO10_GPIO, /* NAND Ready/Busy */ - - /* interrupts */ - GPIO22_GPIO, /* DM9000 interrupt */ -}; - -#if defined(CONFIG_SPI_PXA2XX) -static struct pxa2xx_spi_controller pxa_ssp_master_info = { - .num_chipselect = 1, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - [0] = { - .modalias = "rtc-max6902", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static void __init cmx255_init_rtc(void) -{ - pxa2xx_set_spi_info(1, &pxa_ssp_master_info); - spi_register_board_info(ARRAY_AND_SIZE(spi_board_info)); -} -#else -static inline void cmx255_init_rtc(void) {} -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition cmx255_nor_partitions[] = { - { - .name = "ARMmon", - .size = 0x00030000, - .offset = 0, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } , { - .name = "ARMmon setup block", - .size = 0x00010000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } , { - .name = "kernel", - .size = 0x00160000, - .offset = MTDPART_OFS_APPEND, - } , { - .name = "ramdisk", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND - } -}; - -static struct physmap_flash_data cmx255_nor_flash_data[] = { - { - .width = 2, /* bankwidth in bytes */ - .parts = cmx255_nor_partitions, - .nr_parts = ARRAY_SIZE(cmx255_nor_partitions) - } -}; - -static struct resource cmx255_nor_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cmx255_nor = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = cmx255_nor_flash_data, - }, - .resource = &cmx255_nor_resource, - .num_resources = 1, -}; - -static void __init cmx255_init_nor(void) -{ - platform_device_register(&cmx255_nor); -} -#else -static inline void cmx255_init_nor(void) {} -#endif - -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) - -static struct gpiod_lookup_table cmx255_nand_gpiod_table = { - .dev_id = "gpio-nand", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH), - }, -}; - -static struct resource cmx255_nand_resource[] = { - [0] = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + 11, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_CS5_PHYS, - .end = PXA_CS5_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct mtd_partition cmx255_nand_parts[] = { - [0] = { - .name = "cmx255-nand", - .size = MTDPART_SIZ_FULL, - .offset = 0, - }, -}; - -static struct gpio_nand_platdata cmx255_nand_platdata = { - .parts = cmx255_nand_parts, - .num_parts = ARRAY_SIZE(cmx255_nand_parts), - .chip_delay = 25, -}; - -static struct platform_device cmx255_nand = { - .name = "gpio-nand", - .num_resources = ARRAY_SIZE(cmx255_nand_resource), - .resource = cmx255_nand_resource, - .id = -1, - .dev = { - .platform_data = &cmx255_nand_platdata, - } -}; - -static void __init cmx255_init_nand(void) -{ - gpiod_add_lookup_table(&cmx255_nand_gpiod_table); - platform_device_register(&cmx255_nand); -} -#else -static inline void cmx255_init_nand(void) {} -#endif - -void __init cmx255_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config)); - - cmx255_init_rtc(); - cmx255_init_nor(); - cmx255_init_nand(); -} diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c deleted file mode 100644 index 9baad11314f2..000000000000 --- a/arch/arm/mach-pxa/cm-x270.c +++ /dev/null @@ -1,419 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x270.c - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Mike Rapoport - */ - -#include -#include -#include -#include -#include - -#include -#include