From 6c32496964da0dc230cea763a0e934b2e02dabd5 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Wed, 8 Jun 2022 20:22:05 +0200 Subject: [PATCH 01/56] mm/slub: add missing TID updates on slab deactivation commit eeaa345e128515135ccb864c04482180c08e3259 upstream. The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab. If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains slab objects. (I haven't actually tested these cases though, this is just based on looking at the code. Writing testcases for this stuff seems like it'd be a pain...) The race leading to state inconsistency is (all operations on the same CPU and kmem_cache): - task A: begin do_slab_free(): - read TID - read pcpu freelist (==NULL) - check `slab == c->slab` (true) - [PREEMPT A->B] - task B: begin slab_alloc_node(): - fastpath fails (`c->freelist` is NULL) - enter __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - take local_lock_irqsave() - read c->freelist as NULL - get_freelist() returns NULL - write `c->slab = NULL` - drop local_unlock_irqrestore() - goto new_slab - slub_percpu_partial() is NULL - get_partial() returns NULL - slub_put_cpu_ptr() (enables preemption) - [PREEMPT B->A] - task A: finish do_slab_free(): - this_cpu_cmpxchg_double() succeeds() - [CORRUPT STATE: c->slab==NULL, c->freelist!=NULL] From there, the object on c->freelist will get lost if task B is allowed to continue from here: It will proceed to the retry_load_slab label, set c->slab, then jump to load_freelist, which clobbers c->freelist. But if we instead continue as follows, we get worse corruption: - task A: run __slab_free() on object from other struct slab: - CPU_PARTIAL_FREE case (slab was on no list, is now on pcpu partial) - task A: run slab_alloc_node() with NUMA node constraint: - fastpath fails (c->slab is NULL) - call __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - c->slab is NULL: goto new_slab - slub_percpu_partial() is non-NULL - set c->slab to slub_percpu_partial(c) - [CORRUPT STATE: c->slab points to slab-1, c->freelist has objects from slab-2] - goto redo - node_match() fails - goto deactivate_slab - existing c->freelist is passed into deactivate_slab() - inuse count of slab-1 is decremented to account for object from slab-2 At this point, the inuse count of slab-1 is 1 lower than it should be. This means that if we free all allocated objects in slab-1 except for one, SLUB will think that slab-1 is completely unused, and may free its page, leading to use-after-free. Fixes: c17dda40a6a4e ("slub: Separate out kmem_cache_cpu processing from deactivate_slab") Fixes: 03e404af26dc2 ("slub: fast release on full slab") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Acked-by: Christoph Lameter Acked-by: David Rientjes Reviewed-by: Muchun Song Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka Link: https://lore.kernel.org/r/20220608182205.2945720-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman --- mm/slub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 1384dc906833..b395ef064544 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2297,6 +2297,7 @@ redo: c->page = NULL; c->freelist = NULL; + c->tid = next_tid(c->tid); } /* @@ -2430,8 +2431,6 @@ static inline void flush_slab(struct kmem_cache *s, struct kmem_cache_cpu *c) { stat(s, CPUSLAB_FLUSH); deactivate_slab(s, c->page, c->freelist, c); - - c->tid = next_tid(c->tid); } /* @@ -2717,6 +2716,7 @@ redo: if (!freelist) { c->page = NULL; + c->tid = next_tid(c->tid); stat(s, DEACTIVATE_BYPASS); goto new_slab; } From b75d4bec85b81109726c0a7d982067e766714509 Mon Sep 17 00:00:00 2001 From: Tim Crawford Date: Fri, 24 Jun 2022 08:41:09 -0600 Subject: [PATCH 02/56] ALSA: hda/realtek: Add quirk for Clevo L140PU commit 11bea26929a1a3a9dd1a287b60c2f471701bf706 upstream. Fixes headset detection on Clevo L140PU. Signed-off-by: Tim Crawford Cc: Link: https://lore.kernel.org/r/20220624144109.3957-1-tcrawford@system76.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 604f55ec7944..f7645720d29c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8934,6 +8934,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x70f4, "Clevo NH77EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x70f6, "Clevo NH77DPQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x7716, "Clevo NS50PU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x7718, "Clevo L140PU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), From 85cd41070df992d3c0dfd828866fdd243d3b774a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 20 May 2022 20:32:39 +0200 Subject: [PATCH 03/56] can: bcm: use call_rcu() instead of costly synchronize_rcu() commit f1b4e32aca0811aa011c76e5d6cf2fa19224b386 upstream. In commit d5f9023fa61e ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") Thadeu Lima de Souza Cascardo introduced two synchronize_rcu() calls in bcm_release() (only once at socket close) and in bcm_delete_rx_op() (called on removal of each single bcm_op). Unfortunately this slow removal of the bcm_op's affects user space applications like cansniffer where the modification of a filter removes 2048 bcm_op's which blocks the cansniffer application for 40(!) seconds. In commit 181d4447905d ("can: gw: use call_rcu() instead of costly synchronize_rcu()") Eric Dumazet replaced the synchronize_rcu() calls with several call_rcu()'s to safely remove the data structures after the removal of CAN ID subscriptions with can_rx_unregister() calls. This patch adopts Erics approach for the can-bcm which should be applicable since the removal of tasklet_kill() in bcm_remove_op() and the introduction of the HRTIMER_MODE_SOFT timer handling in Linux 5.4. Fixes: d5f9023fa61e ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") # >= 5.4 Link: https://lore.kernel.org/all/20220520183239.19111-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Cc: Eric Dumazet Cc: Norbert Slusarek Cc: Thadeu Lima de Souza Cascardo Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- net/can/bcm.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/net/can/bcm.c b/net/can/bcm.c index 0928a39c4423..e918a0f3cda2 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -100,6 +100,7 @@ static inline u64 get_u64(const struct canfd_frame *cp, int offset) struct bcm_op { struct list_head list; + struct rcu_head rcu; int ifindex; canid_t can_id; u32 flags; @@ -718,10 +719,9 @@ static struct bcm_op *bcm_find_op(struct list_head *ops, return NULL; } -static void bcm_remove_op(struct bcm_op *op) +static void bcm_free_op_rcu(struct rcu_head *rcu_head) { - hrtimer_cancel(&op->timer); - hrtimer_cancel(&op->thrtimer); + struct bcm_op *op = container_of(rcu_head, struct bcm_op, rcu); if ((op->frames) && (op->frames != &op->sframe)) kfree(op->frames); @@ -732,6 +732,14 @@ static void bcm_remove_op(struct bcm_op *op) kfree(op); } +static void bcm_remove_op(struct bcm_op *op) +{ + hrtimer_cancel(&op->timer); + hrtimer_cancel(&op->thrtimer); + + call_rcu(&op->rcu, bcm_free_op_rcu); +} + static void bcm_rx_unreg(struct net_device *dev, struct bcm_op *op) { if (op->rx_reg_dev == dev) { @@ -757,6 +765,9 @@ static int bcm_delete_rx_op(struct list_head *ops, struct bcm_msg_head *mh, if ((op->can_id == mh->can_id) && (op->ifindex == ifindex) && (op->flags & CAN_FD_FRAME) == (mh->flags & CAN_FD_FRAME)) { + /* disable automatic timer on frame reception */ + op->flags |= RX_NO_AUTOTIMER; + /* * Don't care if we're bound or not (due to netdev * problems) can_rx_unregister() is always a save @@ -785,7 +796,6 @@ static int bcm_delete_rx_op(struct list_head *ops, struct bcm_msg_head *mh, bcm_rx_handler, op); list_del(&op->list); - synchronize_rcu(); bcm_remove_op(op); return 1; /* done */ } From b6f4b347a1fb4ddf217ca3ed15ce04c7d4d8cbeb Mon Sep 17 00:00:00 2001 From: Liang He Date: Sun, 19 Jun 2022 15:02:57 +0800 Subject: [PATCH 04/56] can: grcan: grcan_probe(): remove extra of_node_get() commit 562fed945ea482833667f85496eeda766d511386 upstream. In grcan_probe(), of_find_node_by_path() has already increased the refcount. There is no need to call of_node_get() again, so remove it. Link: https://lore.kernel.org/all/20220619070257.4067022-1-windhl@126.com Fixes: 1e93ed26acf0 ("can: grcan: grcan_probe(): fix broken system id check for errata workaround needs") Cc: stable@vger.kernel.org # v5.18 Cc: Andreas Larsson Signed-off-by: Liang He Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/grcan.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c index 4923f9ac6a43..3794a7b2c64e 100644 --- a/drivers/net/can/grcan.c +++ b/drivers/net/can/grcan.c @@ -1659,7 +1659,6 @@ static int grcan_probe(struct platform_device *ofdev) */ sysid_parent = of_find_node_by_path("/ambapp0"); if (sysid_parent) { - of_node_get(sysid_parent); err = of_property_read_u32(sysid_parent, "systemid", &sysid); if (!err && ((sysid & GRLIB_VERSION_MASK) >= GRCAN_TXBUG_SAFE_GRLIB_VERSION)) From d0b8e223998866b3e7b2895927d4e9689b0a80d8 Mon Sep 17 00:00:00 2001 From: Rhett Aultman Date: Sun, 3 Jul 2022 19:33:06 +0200 Subject: [PATCH 05/56] can: gs_usb: gs_usb_open/close(): fix memory leak commit 2bda24ef95c0311ab93bda00db40486acf30bd0a upstream. The gs_usb driver appears to suffer from a malady common to many USB CAN adapter drivers in that it performs usb_alloc_coherent() to allocate a number of USB request blocks (URBs) for RX, and then later relies on usb_kill_anchored_urbs() to free them, but this doesn't actually free them. As a result, this may be leaking DMA memory that's been used by the driver. This commit is an adaptation of the techniques found in the esd_usb2 driver where a similar design pattern led to a memory leak. It explicitly frees the RX URBs and their DMA memory via a call to usb_free_coherent(). Since the RX URBs were allocated in the gs_can_open(), we remove them in gs_can_close() rather than in the disconnect function as was done in esd_usb2. For more information, see the 928150fad41b ("can: esd_usb2: fix memory leak"). Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Rhett Aultman Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/usb/gs_usb.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index e023c401f4f7..1bfc497da9ac 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -184,6 +184,8 @@ struct gs_can { struct usb_anchor tx_submitted; atomic_t active_tx_urbs; + void *rxbuf[GS_MAX_RX_URBS]; + dma_addr_t rxbuf_dma[GS_MAX_RX_URBS]; }; /* usb interface struct */ @@ -592,6 +594,7 @@ static int gs_can_open(struct net_device *netdev) for (i = 0; i < GS_MAX_RX_URBS; i++) { struct urb *urb; u8 *buf; + dma_addr_t buf_dma; /* alloc rx urb */ urb = usb_alloc_urb(0, GFP_KERNEL); @@ -602,7 +605,7 @@ static int gs_can_open(struct net_device *netdev) buf = usb_alloc_coherent(dev->udev, sizeof(struct gs_host_frame), GFP_KERNEL, - &urb->transfer_dma); + &buf_dma); if (!buf) { netdev_err(netdev, "No memory left for USB buffer\n"); @@ -610,6 +613,8 @@ static int gs_can_open(struct net_device *netdev) return -ENOMEM; } + urb->transfer_dma = buf_dma; + /* fill, anchor, and submit rx urb */ usb_fill_bulk_urb(urb, dev->udev, @@ -633,10 +638,17 @@ static int gs_can_open(struct net_device *netdev) rc); usb_unanchor_urb(urb); + usb_free_coherent(dev->udev, + sizeof(struct gs_host_frame), + buf, + buf_dma); usb_free_urb(urb); break; } + dev->rxbuf[i] = buf; + dev->rxbuf_dma[i] = buf_dma; + /* Drop reference, * USB core will take care of freeing it */ @@ -701,13 +713,20 @@ static int gs_can_close(struct net_device *netdev) int rc; struct gs_can *dev = netdev_priv(netdev); struct gs_usb *parent = dev->parent; + unsigned int i; netif_stop_queue(netdev); /* Stop polling */ parent->active_channels--; - if (!parent->active_channels) + if (!parent->active_channels) { usb_kill_anchored_urbs(&parent->rx_submitted); + for (i = 0; i < GS_MAX_RX_URBS; i++) + usb_free_coherent(dev->udev, + sizeof(struct gs_host_frame), + dev->rxbuf[i], + dev->rxbuf_dma[i]); + } /* Stop sending URBs */ usb_kill_anchored_urbs(&dev->tx_submitted); From 9adec7334969d9a20b9359ee745d17efc8f9890f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 1 Jul 2022 14:47:24 +0200 Subject: [PATCH 06/56] bpf: Fix incorrect verifier simulation around jmp32's jeq/jne commit a12ca6277eca6aeeccf66e840c23a2b520e24c8f upstream. Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the register value does not match expectations for the fall-through path. For example: Before fix: 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r2 = 0 ; R2_w=P0 1: (b7) r6 = 563 ; R6_w=P563 2: (87) r2 = -r2 ; R2_w=Pscalar() 3: (87) r2 = -r2 ; R2_w=Pscalar() 4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563 5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P571 <--- [*] 6: (95) exit R0 !read_ok After fix: 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r2 = 0 ; R2_w=P0 1: (b7) r6 = 563 ; R6_w=P563 2: (87) r2 = -r2 ; R2_w=Pscalar() 3: (87) r2 = -r2 ; R2_w=Pscalar() 4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563 5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P8 <--- [*] 6: (95) exit R0 !read_ok As can be seen on line 5 for the branch fall-through path in R2 [*] is that given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as upper 32 bit are known to be zero. However, verifier incorrectly concludes that r2 = 571 which is far off. The problem is it only marks false{true}_reg as known in the switch for JE/NE case, but at the end of the function, it uses {false,true}_{64,32}off to update {false,true}_reg->var_off and they still hold the prior value of {false,true}_reg->var_off before it got marked as known. The subsequent __reg_combine_32_into_64() then propagates this old var_off and derives new bounds. The information between min/max bounds on {false,true}_reg from setting the register to known const combined with the {false,true}_reg->var_off based on the old information then derives wrong register data. Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant {false,true}_{64,32}off tnums along with the register marking to known constant. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Kuee K1r0a Signed-off-by: Daniel Borkmann Signed-off-by: Andrii Nakryiko Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20220701124727.11153-1-daniel@iogearbox.net Signed-off-by: Greg Kroah-Hartman --- kernel/bpf/verifier.c | 43 +++++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 18 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 015bf2ba4a0b..20ffc609259c 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -7512,26 +7512,33 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, return; switch (opcode) { + /* JEQ/JNE comparison doesn't change the register equivalence. + * + * r1 = r2; + * if (r1 == 42) goto label; + * ... + * label: // here both r1 and r2 are known to be 42. + * + * Hence when marking register as known preserve it's ID. + */ case BPF_JEQ: - case BPF_JNE: - { - struct bpf_reg_state *reg = - opcode == BPF_JEQ ? true_reg : false_reg; - - /* JEQ/JNE comparison doesn't change the register equivalence. - * r1 = r2; - * if (r1 == 42) goto label; - * ... - * label: // here both r1 and r2 are known to be 42. - * - * Hence when marking register as known preserve it's ID. - */ - if (is_jmp32) - __mark_reg32_known(reg, val32); - else - ___mark_reg_known(reg, val); + if (is_jmp32) { + __mark_reg32_known(true_reg, val32); + true_32off = tnum_subreg(true_reg->var_off); + } else { + ___mark_reg_known(true_reg, val); + true_64off = true_reg->var_off; + } + break; + case BPF_JNE: + if (is_jmp32) { + __mark_reg32_known(false_reg, val32); + false_32off = tnum_subreg(false_reg->var_off); + } else { + ___mark_reg_known(false_reg, val); + false_64off = false_reg->var_off; + } break; - } case BPF_JSET: if (is_jmp32) { false_32off = tnum_and(false_32off, tnum_const(~val32)); From e917be1f83ea14a68b3cf64d3da9968eaf991dae Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 1 Jul 2022 14:47:25 +0200 Subject: [PATCH 07/56] bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals commit 3844d153a41adea718202c10ae91dc96b37453b5 upstream. Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has not been done at that point via __update_reg_bounds(), which would have improved the umax to be equal to umin. Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync() helper and use it consistently everywhere. After the fix, bounds have been corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register is regarded as a 'proper' constant scalar of 0. After: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Reported-by: Kuee K1r0a Signed-off-by: Daniel Borkmann Signed-off-by: Andrii Nakryiko Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20220701124727.11153-2-daniel@iogearbox.net Signed-off-by: Greg Kroah-Hartman --- kernel/bpf/verifier.c | 72 ++++++++++++++----------------------------- 1 file changed, 23 insertions(+), 49 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 20ffc609259c..15ddc4292bc0 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1249,6 +1249,21 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) reg->var_off = tnum_or(tnum_clear_subreg(var64_off), var32_off); } +static void reg_bounds_sync(struct bpf_reg_state *reg) +{ + /* We might have learned new bounds from the var_off. */ + __update_reg_bounds(reg); + /* We might have learned something about the sign bit. */ + __reg_deduce_bounds(reg); + /* We might have learned some bits from the bounds. */ + __reg_bound_offset(reg); + /* Intersecting with the old var_off might have improved our bounds + * slightly, e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), + * then new var_off is (0; 0x7f...fc) which improves our umax. + */ + __update_reg_bounds(reg); +} + static bool __reg32_bound_s64(s32 a) { return a >= 0 && a <= S32_MAX; @@ -1290,16 +1305,8 @@ static void __reg_combine_32_into_64(struct bpf_reg_state *reg) * so they do not impact tnum bounds calculation. */ __mark_reg64_unbounded(reg); - __update_reg_bounds(reg); } - - /* Intersecting with the old var_off might have improved our bounds - * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), - * then new var_off is (0; 0x7f...fc) which improves our umax. - */ - __reg_deduce_bounds(reg); - __reg_bound_offset(reg); - __update_reg_bounds(reg); + reg_bounds_sync(reg); } static bool __reg64_bound_s32(s64 a) @@ -1315,7 +1322,6 @@ static bool __reg64_bound_u32(u64 a) static void __reg_combine_64_into_32(struct bpf_reg_state *reg) { __mark_reg32_unbounded(reg); - if (__reg64_bound_s32(reg->smin_value) && __reg64_bound_s32(reg->smax_value)) { reg->s32_min_value = (s32)reg->smin_value; reg->s32_max_value = (s32)reg->smax_value; @@ -1324,14 +1330,7 @@ static void __reg_combine_64_into_32(struct bpf_reg_state *reg) reg->u32_min_value = (u32)reg->umin_value; reg->u32_max_value = (u32)reg->umax_value; } - - /* Intersecting with the old var_off might have improved our bounds - * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), - * then new var_off is (0; 0x7f...fc) which improves our umax. - */ - __reg_deduce_bounds(reg); - __reg_bound_offset(reg); - __update_reg_bounds(reg); + reg_bounds_sync(reg); } /* Mark a register as having a completely unknown (scalar) value. */ @@ -5230,9 +5229,7 @@ static void do_refine_retval_range(struct bpf_reg_state *regs, int ret_type, ret_reg->s32_max_value = meta->msize_max_value; ret_reg->smin_value = -MAX_ERRNO; ret_reg->s32_min_value = -MAX_ERRNO; - __reg_deduce_bounds(ret_reg); - __reg_bound_offset(ret_reg); - __update_reg_bounds(ret_reg); + reg_bounds_sync(ret_reg); } static int @@ -6197,11 +6194,7 @@ reject: if (!check_reg_sane_offset(env, dst_reg, ptr_reg->type)) return -EINVAL; - - __update_reg_bounds(dst_reg); - __reg_deduce_bounds(dst_reg); - __reg_bound_offset(dst_reg); - + reg_bounds_sync(dst_reg); if (sanitize_check_bounds(env, insn, dst_reg) < 0) return -EACCES; if (sanitize_needed(opcode)) { @@ -6939,10 +6932,7 @@ static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env, /* ALU32 ops are zero extended into 64bit register */ if (alu32) zext_32_to_64(dst_reg); - - __update_reg_bounds(dst_reg); - __reg_deduce_bounds(dst_reg); - __reg_bound_offset(dst_reg); + reg_bounds_sync(dst_reg); return 0; } @@ -7131,10 +7121,7 @@ static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn) insn->dst_reg); } zext_32_to_64(dst_reg); - - __update_reg_bounds(dst_reg); - __reg_deduce_bounds(dst_reg); - __reg_bound_offset(dst_reg); + reg_bounds_sync(dst_reg); } } else { /* case: R = imm @@ -7693,21 +7680,8 @@ static void __reg_combine_min_max(struct bpf_reg_state *src_reg, dst_reg->smax_value); src_reg->var_off = dst_reg->var_off = tnum_intersect(src_reg->var_off, dst_reg->var_off); - /* We might have learned new bounds from the var_off. */ - __update_reg_bounds(src_reg); - __update_reg_bounds(dst_reg); - /* We might have learned something about the sign bit. */ - __reg_deduce_bounds(src_reg); - __reg_deduce_bounds(dst_reg); - /* We might have learned some bits from the bounds. */ - __reg_bound_offset(src_reg); - __reg_bound_offset(dst_reg); - /* Intersecting with the old var_off might have improved our bounds - * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), - * then new var_off is (0; 0x7f...fc) which improves our umax. - */ - __update_reg_bounds(src_reg); - __update_reg_bounds(dst_reg); + reg_bounds_sync(src_reg); + reg_bounds_sync(dst_reg); } static void reg_combine_min_max(struct bpf_reg_state *true_src, From 0085da9df3dced730027923a6b48f58e9016af91 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 5 Jul 2022 14:53:51 +0200 Subject: [PATCH 08/56] usbnet: fix memory leak in error case commit b55a21b764c1e182014630fa5486d717484ac58f upstream. usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/usbnet.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 74a833ad7aa9..58dd77efcaad 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -2102,7 +2102,7 @@ static void usbnet_async_cmd_cb(struct urb *urb) int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype, u16 value, u16 index, const void *data, u16 size) { - struct usb_ctrlrequest *req = NULL; + struct usb_ctrlrequest *req; struct urb *urb; int err = -ENOMEM; void *buf = NULL; @@ -2120,7 +2120,7 @@ int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype, if (!buf) { netdev_err(dev->net, "Error allocating buffer" " in %s!\n", __func__); - goto fail_free; + goto fail_free_urb; } } @@ -2144,14 +2144,21 @@ int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype, if (err < 0) { netdev_err(dev->net, "Error submitting the control" " message: status=%d\n", err); - goto fail_free; + goto fail_free_all; } return 0; +fail_free_all: + kfree(req); fail_free_buf: kfree(buf); -fail_free: - kfree(req); + /* + * avoid a double free + * needed because the flag can be set only + * after filling the URB + */ + urb->transfer_flags = 0; +fail_free_urb: usb_free_urb(urb); fail: return err; From 4f59d12efe3067661a66be13166d790341831948 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Tue, 5 Jul 2022 20:56:10 +0800 Subject: [PATCH 09/56] net: rose: fix UAF bug caused by rose_t0timer_expiry commit 148ca04518070910739dfc4eeda765057856403d upstream. There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- net/rose/rose_route.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index 6e35703ff353..95b198f84a3a 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -227,8 +227,8 @@ static void rose_remove_neigh(struct rose_neigh *rose_neigh) { struct rose_neigh *s; - rose_stop_ftimer(rose_neigh); - rose_stop_t0timer(rose_neigh); + del_timer_sync(&rose_neigh->ftimer); + del_timer_sync(&rose_neigh->t0timer); skb_queue_purge(&rose_neigh->queue); From 4a6430b99f67842617c7208ca55a411e903ba03a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 2 Jul 2022 04:16:31 +0200 Subject: [PATCH 10/56] netfilter: nft_set_pipapo: release elements in clone from abort path commit 9827a0e6e23bf43003cd3d5b7fb11baf59a35e1e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman --- net/netfilter/nft_set_pipapo.c | 48 +++++++++++++++++++++++----------- 1 file changed, 33 insertions(+), 15 deletions(-) diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index f67c4436c5d3..949da87dbb06 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -2120,6 +2120,32 @@ out_scratch: return err; } +/** + * nft_set_pipapo_match_destroy() - Destroy elements from key mapping array + * @set: nftables API set representation + * @m: matching data pointing to key mapping array + */ +static void nft_set_pipapo_match_destroy(const struct nft_set *set, + struct nft_pipapo_match *m) +{ + struct nft_pipapo_field *f; + int i, r; + + for (i = 0, f = m->f; i < m->field_count - 1; i++, f++) + ; + + for (r = 0; r < f->rules; r++) { + struct nft_pipapo_elem *e; + + if (r < f->rules - 1 && f->mt[r + 1].e == f->mt[r].e) + continue; + + e = f->mt[r].e; + + nft_set_elem_destroy(set, e, true); + } +} + /** * nft_pipapo_destroy() - Free private data for set and all committed elements * @set: nftables API set representation @@ -2128,26 +2154,13 @@ static void nft_pipapo_destroy(const struct nft_set *set) { struct nft_pipapo *priv = nft_set_priv(set); struct nft_pipapo_match *m; - struct nft_pipapo_field *f; - int i, r, cpu; + int cpu; m = rcu_dereference_protected(priv->match, true); if (m) { rcu_barrier(); - for (i = 0, f = m->f; i < m->field_count - 1; i++, f++) - ; - - for (r = 0; r < f->rules; r++) { - struct nft_pipapo_elem *e; - - if (r < f->rules - 1 && f->mt[r + 1].e == f->mt[r].e) - continue; - - e = f->mt[r].e; - - nft_set_elem_destroy(set, e, true); - } + nft_set_pipapo_match_destroy(set, m); #ifdef NFT_PIPAPO_ALIGN free_percpu(m->scratch_aligned); @@ -2161,6 +2174,11 @@ static void nft_pipapo_destroy(const struct nft_set *set) } if (priv->clone) { + m = priv->clone; + + if (priv->dirty) + nft_set_pipapo_match_destroy(set, m); + #ifdef NFT_PIPAPO_ALIGN free_percpu(priv->clone->scratch_aligned); #endif From 0a5e36dbcb448a7a8ba63d1d4b6ade2c9d3cc8bf Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 2 Jul 2022 04:16:30 +0200 Subject: [PATCH 11/56] netfilter: nf_tables: stricter validation of element data commit 7e6bc1f6cabcd30aba0b11219d8e01b952eacbb6 upstream. Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman --- net/netfilter/nf_tables_api.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 3c17fadaab5f..e5622e925ea9 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4886,13 +4886,20 @@ static int nft_setelem_parse_data(struct nft_ctx *ctx, struct nft_set *set, struct nft_data *data, struct nlattr *attr) { + u32 dtype; int err; err = nft_data_init(ctx, data, NFT_DATA_VALUE_MAXLEN, desc, attr); if (err < 0) return err; - if (desc->type != NFT_DATA_VERDICT && desc->len != set->dlen) { + if (set->dtype == NFT_DATA_VERDICT) + dtype = NFT_DATA_VERDICT; + else + dtype = NFT_DATA_VALUE; + + if (dtype != desc->type || + set->dlen != desc->len) { nft_data_release(data, desc->type); return -EINVAL; } From 963c80f070ed513b9c6ac29c9236801fba6eefc4 Mon Sep 17 00:00:00 2001 From: Yian Chen Date: Fri, 20 May 2022 17:21:15 -0700 Subject: [PATCH 12/56] iommu/vt-d: Fix PCI bus rescan device hot add commit 316f92a705a4c2bf4712135180d56f3cca09243a upstream. Notifier calling chain uses priority to determine the execution order of the notifiers or listeners registered to the chain. PCI bus device hot add utilizes the notification mechanism. The current code sets low priority (INT_MIN) to Intel dmar_pci_bus_notifier and postpones DMAR decoding after adding new device into IOMMU. The result is that struct device pointer cannot be found in DRHD search for the new device's DMAR/IOMMU. Subsequently, the device is put under the "catch-all" IOMMU instead of the correct one. This could cause system hang when device TLB invalidation is sent to the wrong IOMMU. Invalidation timeout error and hard lockup have been observed and data inconsistency/crush may occur as well. This patch fixes the issue by setting a positive priority(1) for dmar_pci_bus_notifier while the priority of IOMMU bus notifier uses the default value(0), therefore DMAR decoding will be in advance of DRHD search for a new device to find the correct IOMMU. Following is a 2-step example that triggers the bug by simulating PCI device hot add behavior in Intel Sapphire Rapids server. echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove echo 1 > /sys/bus/pci/rescan Fixes: 59ce0515cdaf ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope") Cc: stable@vger.kernel.org # v3.15+ Reported-by: Zhang, Bernice Signed-off-by: Jacob Pan Signed-off-by: Yian Chen Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman --- drivers/iommu/intel/dmar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c index b8d0b56a7575..70d569b80ecf 100644 --- a/drivers/iommu/intel/dmar.c +++ b/drivers/iommu/intel/dmar.c @@ -385,7 +385,7 @@ static int dmar_pci_bus_notifier(struct notifier_block *nb, static struct notifier_block dmar_pci_bus_nb = { .notifier_call = dmar_pci_bus_notifier, - .priority = INT_MIN, + .priority = 1, }; static struct dmar_drhd_unit * From d03e8ed72d7dae6874ee6cf7ae02029a727e7559 Mon Sep 17 00:00:00 2001 From: Guiling Deng Date: Tue, 28 Jun 2022 09:36:41 -0700 Subject: [PATCH 13/56] fbdev: fbmem: Fix logo center image dx issue commit 955f04766d4e6eb94bf3baa539e096808c74ebfb upstream. Image.dx gets wrong value because of missing '()'. If xres == logo->width and n == 1, image.dx = -16. Signed-off-by: Guiling Deng Fixes: 3d8b1933eb1c ("fbdev: fbmem: add config option to center the bootup logo") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fbmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index 00939ca2065a..bf61770f6f6b 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -513,7 +513,7 @@ static int fb_show_logo_line(struct fb_info *info, int rotate, while (n && (n * (logo->width + 8) - 8 > xres)) --n; - image.dx = (xres - n * (logo->width + 8) - 8) / 2; + image.dx = (xres - (n * (logo->width + 8) - 8)) / 2; image.dy = y ?: (yres - logo->height) / 2; } else { image.dx = 0; From b81212828ad19ab3eccf00626cd04099215060bf Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 29 Jun 2022 15:53:55 +0200 Subject: [PATCH 14/56] fbmem: Check virtual screen sizes in fb_set_var() commit 6c11df58fd1ac0aefcb3b227f72769272b939e56 upstream. Verify that the fbdev or drm driver correctly adjusted the virtual screen sizes. On failure report the failing driver and reject the screen size change. Signed-off-by: Helge Deller Reviewed-by: Geert Uytterhoeven Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fbmem.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index bf61770f6f6b..213e738d9eb7 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -1019,6 +1019,16 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) if (ret) return ret; + /* verify that virtual resolution >= physical resolution */ + if (var->xres_virtual < var->xres || + var->yres_virtual < var->yres) { + pr_warn("WARNING: fbcon: Driver '%s' missed to adjust virtual screen size (%ux%u vs. %ux%u)\n", + info->fix.id, + var->xres_virtual, var->yres_virtual, + var->xres, var->yres); + return -EINVAL; + } + if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_NOW) return 0; From b727561ddc9360de9631af2d970d8ffed676a750 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 25 Jun 2022 12:56:49 +0200 Subject: [PATCH 15/56] fbcon: Disallow setting font bigger than screen size commit 65a01e601dbba8b7a51a2677811f70f783766682 upstream. Prevent that users set a font size which is bigger than the physical screen. It's unlikely this may happen (because screens are usually much larger than the fonts and each font char is limited to 32x32 pixels), but it may happen on smaller screens/LCD displays. Signed-off-by: Helge Deller Reviewed-by: Daniel Vetter Reviewed-by: Geert Uytterhoeven Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fbcon.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 13de2bebb09a..5bf68050a26e 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -2510,6 +2510,11 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font, if (charcount != 256 && charcount != 512) return -EINVAL; + /* font bigger than screen resolution ? */ + if (w > FBCON_SWAP(info->var.rotate, info->var.xres, info->var.yres) || + h > FBCON_SWAP(info->var.rotate, info->var.yres, info->var.xres)) + return -EINVAL; + /* Make sure drawing engine can handle the font */ if (!(info->pixmap.blit_x & (1 << (font->width - 1))) || !(info->pixmap.blit_y & (1 << (font->height - 1)))) From cecb806c766c78e1be62b6b7b1483ef59bbaeabe Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 25 Jun 2022 13:00:34 +0200 Subject: [PATCH 16/56] fbcon: Prevent that screen size is smaller than font size commit e64242caef18b4a5840b0e7a9bff37abd4f4f933 upstream. We need to prevent that users configure a screen size which is smaller than the currently selected font size. Otherwise rendering chars on the screen will access memory outside the graphics memory region. This patch adds a new function fbcon_modechange_possible() which implements this check and which later may be extended with other checks if necessary. The new function is called from the FBIOPUT_VSCREENINFO ioctl handler in fbmem.c, which will return -EINVAL if userspace asked for a too small screen size. Signed-off-by: Helge Deller Reviewed-by: Geert Uytterhoeven Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fbcon.c | 28 ++++++++++++++++++++++++++++ drivers/video/fbdev/core/fbmem.c | 4 +++- include/linux/fbcon.h | 4 ++++ 3 files changed, 35 insertions(+), 1 deletion(-) diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 5bf68050a26e..76fedfd1b1b0 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -2776,6 +2776,34 @@ void fbcon_update_vcs(struct fb_info *info, bool all) } EXPORT_SYMBOL(fbcon_update_vcs); +/* let fbcon check if it supports a new screen resolution */ +int fbcon_modechange_possible(struct fb_info *info, struct fb_var_screeninfo *var) +{ + struct fbcon_ops *ops = info->fbcon_par; + struct vc_data *vc; + unsigned int i; + + WARN_CONSOLE_UNLOCKED(); + + if (!ops) + return 0; + + /* prevent setting a screen size which is smaller than font size */ + for (i = first_fb_vc; i <= last_fb_vc; i++) { + vc = vc_cons[i].d; + if (!vc || vc->vc_mode != KD_TEXT || + registered_fb[con2fb_map[i]] != info) + continue; + + if (vc->vc_font.width > FBCON_SWAP(var->rotate, var->xres, var->yres) || + vc->vc_font.height > FBCON_SWAP(var->rotate, var->yres, var->xres)) + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(fbcon_modechange_possible); + int fbcon_mode_deleted(struct fb_info *info, struct fb_videomode *mode) { diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index 213e738d9eb7..d787a344b3b8 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -1119,7 +1119,9 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, return -EFAULT; console_lock(); lock_fb_info(info); - ret = fb_set_var(info, &var); + ret = fbcon_modechange_possible(info, &var); + if (!ret) + ret = fb_set_var(info, &var); if (!ret) fbcon_update_vcs(info, var.activate & FB_ACTIVATE_ALL); unlock_fb_info(info); diff --git a/include/linux/fbcon.h b/include/linux/fbcon.h index ff5596dd30f8..2382dec6d6ab 100644 --- a/include/linux/fbcon.h +++ b/include/linux/fbcon.h @@ -15,6 +15,8 @@ void fbcon_new_modelist(struct fb_info *info); void fbcon_get_requirement(struct fb_info *info, struct fb_blit_caps *caps); void fbcon_fb_blanked(struct fb_info *info, int blank); +int fbcon_modechange_possible(struct fb_info *info, + struct fb_var_screeninfo *var); void fbcon_update_vcs(struct fb_info *info, bool all); void fbcon_remap_all(struct fb_info *info); int fbcon_set_con2fb_map_ioctl(void __user *argp); @@ -33,6 +35,8 @@ static inline void fbcon_new_modelist(struct fb_info *info) {} static inline void fbcon_get_requirement(struct fb_info *info, struct fb_blit_caps *caps) {} static inline void fbcon_fb_blanked(struct fb_info *info, int blank) {} +static inline int fbcon_modechange_possible(struct fb_info *info, + struct fb_var_screeninfo *var) { return 0; } static inline void fbcon_update_vcs(struct fb_info *info, bool all) {} static inline void fbcon_remap_all(struct fb_info *info) {} static inline int fbcon_set_con2fb_map_ioctl(void __user *argp) { return 0; } From d6931bff1cc19bfbea7becd1c7be4296a86f737f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 27 Jun 2022 20:42:18 +0200 Subject: [PATCH 17/56] PM: runtime: Redefine pm_runtime_release_supplier() commit 07358194badf73e267289b40b761f5dc56928eab upstream. Instead of passing an extra bool argument to pm_runtime_release_supplier(), make its callers take care of triggering a runtime-suspend of the supplier device as needed. No expected functional impact. Suggested-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki Reviewed-by: Greg Kroah-Hartman Cc: 5.1+ # 5.1+ Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 3 ++- drivers/base/power/runtime.c | 20 +++++++++----------- include/linux/pm_runtime.h | 5 ++--- 3 files changed, 13 insertions(+), 15 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index c0566aff5355..9a874a58d690 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -348,7 +348,8 @@ static void device_link_release_fn(struct work_struct *work) /* Ensure that all references to the link object have been dropped. */ device_link_synchronize_removal(); - pm_runtime_release_supplier(link, true); + pm_runtime_release_supplier(link); + pm_request_idle(link->supplier); put_device(link->consumer); put_device(link->supplier); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 157331940488..835a39e84c1d 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -308,13 +308,10 @@ static int rpm_get_suppliers(struct device *dev) /** * pm_runtime_release_supplier - Drop references to device link's supplier. * @link: Target device link. - * @check_idle: Whether or not to check if the supplier device is idle. * - * Drop all runtime PM references associated with @link to its supplier device - * and if @check_idle is set, check if that device is idle (and so it can be - * suspended). + * Drop all runtime PM references associated with @link to its supplier device. */ -void pm_runtime_release_supplier(struct device_link *link, bool check_idle) +void pm_runtime_release_supplier(struct device_link *link) { struct device *supplier = link->supplier; @@ -327,9 +324,6 @@ void pm_runtime_release_supplier(struct device_link *link, bool check_idle) while (refcount_dec_not_one(&link->rpm_active) && atomic_read(&supplier->power.usage_count) > 0) pm_runtime_put_noidle(supplier); - - if (check_idle) - pm_request_idle(supplier); } static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend) @@ -337,8 +331,11 @@ static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend) struct device_link *link; list_for_each_entry_rcu(link, &dev->links.suppliers, c_node, - device_links_read_lock_held()) - pm_runtime_release_supplier(link, try_to_suspend); + device_links_read_lock_held()) { + pm_runtime_release_supplier(link); + if (try_to_suspend) + pm_request_idle(link->supplier); + } } static void rpm_put_suppliers(struct device *dev) @@ -1776,7 +1773,8 @@ void pm_runtime_drop_link(struct device_link *link) return; pm_runtime_drop_link_count(link->consumer); - pm_runtime_release_supplier(link, true); + pm_runtime_release_supplier(link); + pm_request_idle(link->supplier); } static bool pm_runtime_need_not_resume(struct device *dev) diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 30091ab5de28..718600e83020 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -58,7 +58,7 @@ extern void pm_runtime_get_suppliers(struct device *dev); extern void pm_runtime_put_suppliers(struct device *dev); extern void pm_runtime_new_link(struct device *dev); extern void pm_runtime_drop_link(struct device_link *link); -extern void pm_runtime_release_supplier(struct device_link *link, bool check_idle); +extern void pm_runtime_release_supplier(struct device_link *link); /** * pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter. @@ -280,8 +280,7 @@ static inline void pm_runtime_get_suppliers(struct device *dev) {} static inline void pm_runtime_put_suppliers(struct device *dev) {} static inline void pm_runtime_new_link(struct device *dev) {} static inline void pm_runtime_drop_link(struct device_link *link) {} -static inline void pm_runtime_release_supplier(struct device_link *link, - bool check_idle) {} +static inline void pm_runtime_release_supplier(struct device_link *link) {} #endif /* !CONFIG_PM */ From 96fa24eb1a383f6473c591cec953fcddfa950fdb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 23 Jun 2022 13:02:31 -0700 Subject: [PATCH 18/56] memregion: Fix memregion_free() fallback definition commit f50974eee5c4a5de1e4f1a3d873099f170df25f8 upstream. In the CONFIG_MEMREGION=n case, memregion_free() is meant to be a static inline. 0day reports: In file included from drivers/cxl/core/port.c:4: include/linux/memregion.h:19:6: warning: no previous prototype for function 'memregion_free' [-Wmissing-prototypes] Mark memregion_free() static. Fixes: 33dd70752cd7 ("lib: Uplevel the pmem "region" ida to a global allocator") Reported-by: kernel test robot Reviewed-by: Alison Schofield Link: https://lore.kernel.org/r/165601455171.4042645.3350844271068713515.stgit@dwillia2-xfh Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- include/linux/memregion.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/memregion.h b/include/linux/memregion.h index e11595256cac..c04c4fd2e209 100644 --- a/include/linux/memregion.h +++ b/include/linux/memregion.h @@ -16,7 +16,7 @@ static inline int memregion_alloc(gfp_t gfp) { return -ENOMEM; } -void memregion_free(int id) +static inline void memregion_free(int id) { } #endif From 19104425c962e0b4cbdaa94cecec7be1b5197a83 Mon Sep 17 00:00:00 2001 From: Hsin-Yi Wang Date: Fri, 1 Jul 2022 01:33:29 +0800 Subject: [PATCH 19/56] video: of_display_timing.h: include errno.h commit 3663a2fb325b8782524f3edb0ae32d6faa615109 upstream. If CONFIG_OF is not enabled, default of_get_display_timing() returns an errno, so include the header. Fixes: 422b67e0b31a ("videomode: provide dummy inline functions for !CONFIG_OF") Suggested-by: Stephen Boyd Signed-off-by: Hsin-Yi Wang Reviewed-by: Stephen Boyd Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- include/video/of_display_timing.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/video/of_display_timing.h b/include/video/of_display_timing.h index e1126a74882a..eff166fdd81b 100644 --- a/include/video/of_display_timing.h +++ b/include/video/of_display_timing.h @@ -8,6 +8,8 @@ #ifndef __LINUX_OF_DISPLAY_TIMING_H #define __LINUX_OF_DISPLAY_TIMING_H +#include + struct device_node; struct display_timing; struct display_timings; From 79af7be44ccb14e09ed13f56fc0cd1523f453b4f Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Thu, 30 Jun 2022 14:16:54 +0200 Subject: [PATCH 20/56] powerpc/powernv: delay rng platform device creation until later in boot commit 887502826549caa7e4215fd9e628f48f14c0825a upstream. The platform device for the rng must be created much later in boot. Otherwise it tries to connect to a parent that doesn't yet exist, resulting in this splat: [ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called. [ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable) [ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00 [ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80 [ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0 [ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4 [ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214 This patch fixes the issue by doing the platform device creation inside of machine_subsys_initcall. Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch") Cc: stable@vger.kernel.org Reported-by: Sachin Sant Signed-off-by: Jason A. Donenfeld Tested-by: Sachin Sant [mpe: Change "of node" to "platform device" in change log] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/powernv/rng.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c index 2b5a1a41234c..236bd2ba51b9 100644 --- a/arch/powerpc/platforms/powernv/rng.c +++ b/arch/powerpc/platforms/powernv/rng.c @@ -176,12 +176,8 @@ static int __init pnv_get_random_long_early(unsigned long *v) NULL) != pnv_get_random_long_early) return 0; - for_each_compatible_node(dn, NULL, "ibm,power-rng") { - if (rng_create(dn)) - continue; - /* Create devices for hwrng driver */ - of_platform_device_create(dn, NULL, NULL); - } + for_each_compatible_node(dn, NULL, "ibm,power-rng") + rng_create(dn); if (!ppc_md.get_random_seed) return 0; @@ -205,10 +201,18 @@ void __init pnv_rng_init(void) static int __init pnv_rng_late_init(void) { + struct device_node *dn; unsigned long v; + /* In case it wasn't called during init for some other reason. */ if (ppc_md.get_random_seed == pnv_get_random_long_early) pnv_get_random_long_early(&v); + + if (ppc_md.get_random_seed == powernv_get_random_long) { + for_each_compatible_node(dn, NULL, "ibm,power-rng") + of_platform_device_create(dn, NULL, NULL); + } + return 0; } machine_subsys_initcall(powernv, pnv_rng_late_init); From f439d08ef1a2d469f36dce3fb2767acab5903124 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Fri, 8 Jul 2022 20:48:17 +0200 Subject: [PATCH 21/56] can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info commit 49f274c72357d2d74cba70b172cf369768909707 upstream. Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks. All Kvaser USBcanII supports listen-only mode and error counter reporting. Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.com Suggested-by: Marc Kleine-Budde Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson [mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 22 +- .../net/can/usb/kvaser_usb/kvaser_usb_core.c | 244 ++++++++++-------- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 24 +- 3 files changed, 155 insertions(+), 135 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h index 390b6bde883c..2e358e20d3d9 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h @@ -35,9 +35,9 @@ #define KVASER_USB_RX_BUFFER_SIZE 3072 #define KVASER_USB_MAX_NET_DEVICES 5 -/* USB devices features */ -#define KVASER_USB_HAS_SILENT_MODE BIT(0) -#define KVASER_USB_HAS_TXRX_ERRORS BIT(1) +/* Kvaser USB device quirks */ +#define KVASER_USB_QUIRK_HAS_SILENT_MODE BIT(0) +#define KVASER_USB_QUIRK_HAS_TXRX_ERRORS BIT(1) /* Device capabilities */ #define KVASER_USB_CAP_BERR_CAP 0x01 @@ -65,12 +65,7 @@ struct kvaser_usb_dev_card_data_hydra { struct kvaser_usb_dev_card_data { u32 ctrlmode_supported; u32 capabilities; - union { - struct { - enum kvaser_usb_leaf_family family; - } leaf; - struct kvaser_usb_dev_card_data_hydra hydra; - }; + struct kvaser_usb_dev_card_data_hydra hydra; }; /* Context for an outstanding, not yet ACKed, transmission */ @@ -84,7 +79,7 @@ struct kvaser_usb { struct usb_device *udev; struct usb_interface *intf; struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES]; - const struct kvaser_usb_dev_ops *ops; + const struct kvaser_usb_driver_info *driver_info; const struct kvaser_usb_dev_cfg *cfg; struct usb_endpoint_descriptor *bulk_in, *bulk_out; @@ -166,6 +161,12 @@ struct kvaser_usb_dev_ops { int *cmd_len, u16 transid); }; +struct kvaser_usb_driver_info { + u32 quirks; + enum kvaser_usb_leaf_family family; + const struct kvaser_usb_dev_ops *ops; +}; + struct kvaser_usb_dev_cfg { const struct can_clock clock; const unsigned int timestamp_freq; @@ -185,4 +186,5 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd, int len); int kvaser_usb_can_rx_over_error(struct net_device *netdev); + #endif /* KVASER_USB_H */ diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index 0f1d3e807d63..ae43c423a8ce 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -79,104 +79,125 @@ #define USB_ATI_MEMO_PRO_2HS_V2_PRODUCT_ID 269 #define USB_HYBRID_PRO_CANLIN_PRODUCT_ID 270 -static inline bool kvaser_is_leaf(const struct usb_device_id *id) -{ - return (id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID && - id->idProduct <= USB_CAN_R_PRODUCT_ID) || - (id->idProduct >= USB_LEAF_LITE_V2_PRODUCT_ID && - id->idProduct <= USB_MINI_PCIE_2HS_PRODUCT_ID); -} +static const struct kvaser_usb_driver_info kvaser_usb_driver_info_hydra = { + .quirks = 0, + .ops = &kvaser_usb_hydra_dev_ops, +}; -static inline bool kvaser_is_usbcan(const struct usb_device_id *id) -{ - return id->idProduct >= USB_USBCAN_REVB_PRODUCT_ID && - id->idProduct <= USB_MEMORATOR_PRODUCT_ID; -} +static const struct kvaser_usb_driver_info kvaser_usb_driver_info_usbcan = { + .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS | + KVASER_USB_QUIRK_HAS_SILENT_MODE, + .family = KVASER_USBCAN, + .ops = &kvaser_usb_leaf_dev_ops, +}; -static inline bool kvaser_is_hydra(const struct usb_device_id *id) -{ - return id->idProduct >= USB_BLACKBIRD_V2_PRODUCT_ID && - id->idProduct <= USB_HYBRID_PRO_CANLIN_PRODUCT_ID; -} +static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf = { + .quirks = 0, + .family = KVASER_LEAF, + .ops = &kvaser_usb_leaf_dev_ops, +}; + +static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err = { + .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS, + .family = KVASER_LEAF, + .ops = &kvaser_usb_leaf_dev_ops, +}; + +static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err_listen = { + .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS | + KVASER_USB_QUIRK_HAS_SILENT_MODE, + .family = KVASER_LEAF, + .ops = &kvaser_usb_leaf_dev_ops, +}; static const struct usb_device_id kvaser_usb_table[] = { /* Leaf USB product IDs */ - { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LS_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_SWC_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LIN_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_LS_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_SWC_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_DEVEL_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSHS_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_UPRO_HSHS_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_GI_PRODUCT_ID) }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_GI_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_OBDII_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS | - KVASER_USB_HAS_SILENT_MODE }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err_listen }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSLS_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_CH_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_SPRO_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, { USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_MERCURY_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, { USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_LEAF_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, { USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID) }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, /* USBCANII USB product IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan }, { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_REVB_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMORATOR_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan }, { USB_DEVICE(KVASER_VENDOR_ID, USB_VCI2_PRODUCT_ID), - .driver_info = KVASER_USB_HAS_TXRX_ERRORS }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_usbcan }, /* Minihydra USB product IDs */ - { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_5HS_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_5HS_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_4HS_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_HS_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_2HS_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_2HS_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_2HS_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_CANLIN_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_USBCAN_PRO_2HS_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_MEMO_PRO_2HS_V2_PRODUCT_ID) }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_PRO_CANLIN_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_5HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_5HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_4HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_HS_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_2HS_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_2HS_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_2HS_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_2CANLIN_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_USBCAN_PRO_2HS_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_MEMO_PRO_2HS_V2_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_PRO_CANLIN_PRODUCT_ID), + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, { } }; MODULE_DEVICE_TABLE(usb, kvaser_usb_table); @@ -267,6 +288,7 @@ int kvaser_usb_can_rx_over_error(struct net_device *netdev) static void kvaser_usb_read_bulk_callback(struct urb *urb) { struct kvaser_usb *dev = urb->context; + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; int err; unsigned int i; @@ -283,8 +305,8 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb) goto resubmit_urb; } - dev->ops->dev_read_bulk_callback(dev, urb->transfer_buffer, - urb->actual_length); + ops->dev_read_bulk_callback(dev, urb->transfer_buffer, + urb->actual_length); resubmit_urb: usb_fill_bulk_urb(urb, dev->udev, @@ -378,6 +400,7 @@ static int kvaser_usb_open(struct net_device *netdev) { struct kvaser_usb_net_priv *priv = netdev_priv(netdev); struct kvaser_usb *dev = priv->dev; + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; int err; err = open_candev(netdev); @@ -388,11 +411,11 @@ static int kvaser_usb_open(struct net_device *netdev) if (err) goto error; - err = dev->ops->dev_set_opt_mode(priv); + err = ops->dev_set_opt_mode(priv); if (err) goto error; - err = dev->ops->dev_start_chip(priv); + err = ops->dev_start_chip(priv); if (err) { netdev_warn(netdev, "Cannot start device, error %d\n", err); goto error; @@ -449,22 +472,23 @@ static int kvaser_usb_close(struct net_device *netdev) { struct kvaser_usb_net_priv *priv = netdev_priv(netdev); struct kvaser_usb *dev = priv->dev; + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; int err; netif_stop_queue(netdev); - err = dev->ops->dev_flush_queue(priv); + err = ops->dev_flush_queue(priv); if (err) netdev_warn(netdev, "Cannot flush queue, error %d\n", err); - if (dev->ops->dev_reset_chip) { - err = dev->ops->dev_reset_chip(dev, priv->channel); + if (ops->dev_reset_chip) { + err = ops->dev_reset_chip(dev, priv->channel); if (err) netdev_warn(netdev, "Cannot reset card, error %d\n", err); } - err = dev->ops->dev_stop_chip(priv); + err = ops->dev_stop_chip(priv); if (err) netdev_warn(netdev, "Cannot stop device, error %d\n", err); @@ -503,6 +527,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, { struct kvaser_usb_net_priv *priv = netdev_priv(netdev); struct kvaser_usb *dev = priv->dev; + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; struct net_device_stats *stats = &netdev->stats; struct kvaser_usb_tx_urb_context *context = NULL; struct urb *urb; @@ -545,8 +570,8 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, goto freeurb; } - buf = dev->ops->dev_frame_to_cmd(priv, skb, &context->dlc, &cmd_len, - context->echo_index); + buf = ops->dev_frame_to_cmd(priv, skb, &context->dlc, &cmd_len, + context->echo_index); if (!buf) { stats->tx_dropped++; dev_kfree_skb(skb); @@ -630,15 +655,16 @@ static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev) } } -static int kvaser_usb_init_one(struct kvaser_usb *dev, - const struct usb_device_id *id, int channel) +static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel) { struct net_device *netdev; struct kvaser_usb_net_priv *priv; + const struct kvaser_usb_driver_info *driver_info = dev->driver_info; + const struct kvaser_usb_dev_ops *ops = driver_info->ops; int err; - if (dev->ops->dev_reset_chip) { - err = dev->ops->dev_reset_chip(dev, channel); + if (ops->dev_reset_chip) { + err = ops->dev_reset_chip(dev, channel); if (err) return err; } @@ -667,20 +693,19 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, priv->can.state = CAN_STATE_STOPPED; priv->can.clock.freq = dev->cfg->clock.freq; priv->can.bittiming_const = dev->cfg->bittiming_const; - priv->can.do_set_bittiming = dev->ops->dev_set_bittiming; - priv->can.do_set_mode = dev->ops->dev_set_mode; - if ((id->driver_info & KVASER_USB_HAS_TXRX_ERRORS) || + priv->can.do_set_bittiming = ops->dev_set_bittiming; + priv->can.do_set_mode = ops->dev_set_mode; + if ((driver_info->quirks & KVASER_USB_QUIRK_HAS_TXRX_ERRORS) || (priv->dev->card_data.capabilities & KVASER_USB_CAP_BERR_CAP)) - priv->can.do_get_berr_counter = dev->ops->dev_get_berr_counter; - if (id->driver_info & KVASER_USB_HAS_SILENT_MODE) + priv->can.do_get_berr_counter = ops->dev_get_berr_counter; + if (driver_info->quirks & KVASER_USB_QUIRK_HAS_SILENT_MODE) priv->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; priv->can.ctrlmode_supported |= dev->card_data.ctrlmode_supported; if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) { priv->can.data_bittiming_const = dev->cfg->data_bittiming_const; - priv->can.do_set_data_bittiming = - dev->ops->dev_set_data_bittiming; + priv->can.do_set_data_bittiming = ops->dev_set_data_bittiming; } netdev->flags |= IFF_ECHO; @@ -711,29 +736,22 @@ static int kvaser_usb_probe(struct usb_interface *intf, struct kvaser_usb *dev; int err; int i; + const struct kvaser_usb_driver_info *driver_info; + const struct kvaser_usb_dev_ops *ops; + + driver_info = (const struct kvaser_usb_driver_info *)id->driver_info; + if (!driver_info) + return -ENODEV; dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - if (kvaser_is_leaf(id)) { - dev->card_data.leaf.family = KVASER_LEAF; - dev->ops = &kvaser_usb_leaf_dev_ops; - } else if (kvaser_is_usbcan(id)) { - dev->card_data.leaf.family = KVASER_USBCAN; - dev->ops = &kvaser_usb_leaf_dev_ops; - } else if (kvaser_is_hydra(id)) { - dev->ops = &kvaser_usb_hydra_dev_ops; - } else { - dev_err(&intf->dev, - "Product ID (%d) is not a supported Kvaser USB device\n", - id->idProduct); - return -ENODEV; - } - dev->intf = intf; + dev->driver_info = driver_info; + ops = driver_info->ops; - err = dev->ops->dev_setup_endpoints(dev); + err = ops->dev_setup_endpoints(dev); if (err) { dev_err(&intf->dev, "Cannot get usb endpoint(s)"); return err; @@ -747,22 +765,22 @@ static int kvaser_usb_probe(struct usb_interface *intf, dev->card_data.ctrlmode_supported = 0; dev->card_data.capabilities = 0; - err = dev->ops->dev_init_card(dev); + err = ops->dev_init_card(dev); if (err) { dev_err(&intf->dev, "Failed to initialize card, error %d\n", err); return err; } - err = dev->ops->dev_get_software_info(dev); + err = ops->dev_get_software_info(dev); if (err) { dev_err(&intf->dev, "Cannot get software info, error %d\n", err); return err; } - if (dev->ops->dev_get_software_details) { - err = dev->ops->dev_get_software_details(dev); + if (ops->dev_get_software_details) { + err = ops->dev_get_software_details(dev); if (err) { dev_err(&intf->dev, "Cannot get software details, error %d\n", err); @@ -780,14 +798,14 @@ static int kvaser_usb_probe(struct usb_interface *intf, dev_dbg(&intf->dev, "Max outstanding tx = %d URBs\n", dev->max_tx_urbs); - err = dev->ops->dev_get_card_info(dev); + err = ops->dev_get_card_info(dev); if (err) { dev_err(&intf->dev, "Cannot get card info, error %d\n", err); return err; } - if (dev->ops->dev_get_capabilities) { - err = dev->ops->dev_get_capabilities(dev); + if (ops->dev_get_capabilities) { + err = ops->dev_get_capabilities(dev); if (err) { dev_err(&intf->dev, "Cannot get capabilities, error %d\n", err); @@ -797,7 +815,7 @@ static int kvaser_usb_probe(struct usb_interface *intf, } for (i = 0; i < dev->nchannels; i++) { - err = kvaser_usb_init_one(dev, id, i); + err = kvaser_usb_init_one(dev, i); if (err) { kvaser_usb_remove_interfaces(dev); return err; diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 8b5d1add899a..fb51f80012a0 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -405,7 +405,7 @@ kvaser_usb_leaf_frame_to_cmd(const struct kvaser_usb_net_priv *priv, sizeof(struct kvaser_cmd_tx_can); cmd->u.tx_can.channel = priv->channel; - switch (dev->card_data.leaf.family) { + switch (dev->driver_info->family) { case KVASER_LEAF: cmd_tx_can_flags = &cmd->u.tx_can.leaf.flags; break; @@ -551,7 +551,7 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev) if (err) return err; - switch (dev->card_data.leaf.family) { + switch (dev->driver_info->family) { case KVASER_LEAF: kvaser_usb_leaf_get_software_info_leaf(dev, &cmd.u.leaf.softinfo); break; @@ -598,7 +598,7 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev) dev->nchannels = cmd.u.cardinfo.nchannels; if (dev->nchannels > KVASER_USB_MAX_NET_DEVICES || - (dev->card_data.leaf.family == KVASER_USBCAN && + (dev->driver_info->family == KVASER_USBCAN && dev->nchannels > MAX_USBCAN_NET_DEVICES)) return -EINVAL; @@ -734,7 +734,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv, new_state < CAN_STATE_BUS_OFF) priv->can.can_stats.restarts++; - switch (dev->card_data.leaf.family) { + switch (dev->driver_info->family) { case KVASER_LEAF: if (es->leaf.error_factor) { priv->can.can_stats.bus_error++; @@ -813,7 +813,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev, } } - switch (dev->card_data.leaf.family) { + switch (dev->driver_info->family) { case KVASER_LEAF: if (es->leaf.error_factor) { cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT; @@ -1005,7 +1005,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev, stats = &priv->netdev->stats; if ((cmd->u.rx_can_header.flag & MSG_FLAG_ERROR_FRAME) && - (dev->card_data.leaf.family == KVASER_LEAF && + (dev->driver_info->family == KVASER_LEAF && cmd->id == CMD_LEAF_LOG_MESSAGE)) { kvaser_usb_leaf_leaf_rx_error(dev, cmd); return; @@ -1021,7 +1021,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev, return; } - switch (dev->card_data.leaf.family) { + switch (dev->driver_info->family) { case KVASER_LEAF: rx_data = cmd->u.leaf.rx_can.data; break; @@ -1036,7 +1036,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev, return; } - if (dev->card_data.leaf.family == KVASER_LEAF && cmd->id == + if (dev->driver_info->family == KVASER_LEAF && cmd->id == CMD_LEAF_LOG_MESSAGE) { cf->can_id = le32_to_cpu(cmd->u.leaf.log_message.id); if (cf->can_id & KVASER_EXTENDED_FRAME) @@ -1133,14 +1133,14 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev, break; case CMD_LEAF_LOG_MESSAGE: - if (dev->card_data.leaf.family != KVASER_LEAF) + if (dev->driver_info->family != KVASER_LEAF) goto warn; kvaser_usb_leaf_rx_can_msg(dev, cmd); break; case CMD_CHIP_STATE_EVENT: case CMD_CAN_ERROR_EVENT: - if (dev->card_data.leaf.family == KVASER_LEAF) + if (dev->driver_info->family == KVASER_LEAF) kvaser_usb_leaf_leaf_rx_error(dev, cmd); else kvaser_usb_leaf_usbcan_rx_error(dev, cmd); @@ -1152,12 +1152,12 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev, /* Ignored commands */ case CMD_USBCAN_CLOCK_OVERFLOW_EVENT: - if (dev->card_data.leaf.family != KVASER_USBCAN) + if (dev->driver_info->family != KVASER_USBCAN) goto warn; break; case CMD_FLUSH_QUEUE_REPLY: - if (dev->card_data.leaf.family != KVASER_LEAF) + if (dev->driver_info->family != KVASER_LEAF) goto warn; break; From a741e762e1995096572774a1bf93243f8c44b913 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Fri, 8 Jul 2022 20:48:18 +0200 Subject: [PATCH 22/56] can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression commit e6c80e601053ffdac5709f11ff3ec1e19ed05f7b upstream. The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters. This regression affects M32C based Leaf devices with non-16MHz clock. Fixes: 854a2bede1f0 ("can: kvaser_usb: get CAN clock frequency from device") Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 1 + .../net/can/usb/kvaser_usb/kvaser_usb_core.c | 29 ++++++++++++------- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 25 ++++++++++------ 3 files changed, 36 insertions(+), 19 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h index 2e358e20d3d9..478e2eeec136 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h @@ -38,6 +38,7 @@ /* Kvaser USB device quirks */ #define KVASER_USB_QUIRK_HAS_SILENT_MODE BIT(0) #define KVASER_USB_QUIRK_HAS_TXRX_ERRORS BIT(1) +#define KVASER_USB_QUIRK_IGNORE_CLK_FREQ BIT(2) /* Device capabilities */ #define KVASER_USB_CAP_BERR_CAP 0x01 diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index ae43c423a8ce..416763fd1f11 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -92,26 +92,33 @@ static const struct kvaser_usb_driver_info kvaser_usb_driver_info_usbcan = { }; static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf = { - .quirks = 0, + .quirks = KVASER_USB_QUIRK_IGNORE_CLK_FREQ, .family = KVASER_LEAF, .ops = &kvaser_usb_leaf_dev_ops, }; static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err = { - .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS, + .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS | + KVASER_USB_QUIRK_IGNORE_CLK_FREQ, .family = KVASER_LEAF, .ops = &kvaser_usb_leaf_dev_ops, }; static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err_listen = { .quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS | - KVASER_USB_QUIRK_HAS_SILENT_MODE, + KVASER_USB_QUIRK_HAS_SILENT_MODE | + KVASER_USB_QUIRK_IGNORE_CLK_FREQ, .family = KVASER_LEAF, .ops = &kvaser_usb_leaf_dev_ops, }; +static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leafimx = { + .quirks = 0, + .ops = &kvaser_usb_leaf_dev_ops, +}; + static const struct usb_device_id kvaser_usb_table[] = { - /* Leaf USB product IDs */ + /* Leaf M32C USB product IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID), .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID), @@ -152,16 +159,18 @@ static const struct usb_device_id kvaser_usb_table[] = { .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, { USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID), .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err }, + + /* Leaf i.MX28 USB product IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID), - .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID), - .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID), - .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx }, { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID), - .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID), - .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf }, + .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx }, /* USBCANII USB product IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID), @@ -190,7 +199,7 @@ static const struct usb_device_id kvaser_usb_table[] = { .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO_PRO_2HS_V2_PRODUCT_ID), .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, - { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_2CANLIN_PRODUCT_ID), + { USB_DEVICE(KVASER_VENDOR_ID, USB_HYBRID_CANLIN_PRODUCT_ID), .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, { USB_DEVICE(KVASER_VENDOR_ID, USB_ATI_USBCAN_PRO_2HS_V2_PRODUCT_ID), .driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_hydra }, diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index fb51f80012a0..b8c2f2c30050 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -525,16 +525,23 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev, dev->fw_version = le32_to_cpu(softinfo->fw_version); dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx); - switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) { - case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK: + if (dev->driver_info->quirks & KVASER_USB_QUIRK_IGNORE_CLK_FREQ) { + /* Firmware expects bittiming parameters calculated for 16MHz + * clock, regardless of the actual clock + */ dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz; - break; - case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK: - dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz; - break; - case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK: - dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz; - break; + } else { + switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) { + case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK: + dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz; + break; + case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK: + dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz; + break; + case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK: + dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz; + break; + } } } From 852952ea0e15728d8bfbe34dc224b53a030372d4 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Fri, 8 Jul 2022 20:48:19 +0200 Subject: [PATCH 23/56] can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits commit b3b6df2c56d80b8c6740433cff5f016668b8de70 upstream. Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe") Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family") Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson [mkl: remove stray netlink.h include] [mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 2 + .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 4 +- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 76 +++++++++++-------- 3 files changed, 47 insertions(+), 35 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h index 478e2eeec136..61e67986b625 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h @@ -188,4 +188,6 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd, int kvaser_usb_can_rx_over_error(struct net_device *netdev); +extern const struct can_bittiming_const kvaser_usb_flexc_bittiming_const; + #endif /* KVASER_USB_H */ diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c index 218fadc91155..a7c408acb0c0 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -371,7 +371,7 @@ static const struct can_bittiming_const kvaser_usb_hydra_kcan_bittiming_c = { .brp_inc = 1, }; -static const struct can_bittiming_const kvaser_usb_hydra_flexc_bittiming_c = { +const struct can_bittiming_const kvaser_usb_flexc_bittiming_const = { .name = "kvaser_usb_flex", .tseg1_min = 4, .tseg1_max = 16, @@ -2024,5 +2024,5 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_flexc = { .freq = 24000000, }, .timestamp_freq = 1, - .bittiming_const = &kvaser_usb_hydra_flexc_bittiming_c, + .bittiming_const = &kvaser_usb_flexc_bittiming_const, }; diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index b8c2f2c30050..0e0403dd0550 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -100,16 +100,6 @@ #define USBCAN_ERROR_STATE_RX_ERROR BIT(1) #define USBCAN_ERROR_STATE_BUSERROR BIT(2) -/* bittiming parameters */ -#define KVASER_USB_TSEG1_MIN 1 -#define KVASER_USB_TSEG1_MAX 16 -#define KVASER_USB_TSEG2_MIN 1 -#define KVASER_USB_TSEG2_MAX 8 -#define KVASER_USB_SJW_MAX 4 -#define KVASER_USB_BRP_MIN 1 -#define KVASER_USB_BRP_MAX 64 -#define KVASER_USB_BRP_INC 1 - /* ctrl modes */ #define KVASER_CTRL_MODE_NORMAL 1 #define KVASER_CTRL_MODE_SILENT 2 @@ -342,48 +332,68 @@ struct kvaser_usb_err_summary { }; }; -static const struct can_bittiming_const kvaser_usb_leaf_bittiming_const = { - .name = "kvaser_usb", - .tseg1_min = KVASER_USB_TSEG1_MIN, - .tseg1_max = KVASER_USB_TSEG1_MAX, - .tseg2_min = KVASER_USB_TSEG2_MIN, - .tseg2_max = KVASER_USB_TSEG2_MAX, - .sjw_max = KVASER_USB_SJW_MAX, - .brp_min = KVASER_USB_BRP_MIN, - .brp_max = KVASER_USB_BRP_MAX, - .brp_inc = KVASER_USB_BRP_INC, +static const struct can_bittiming_const kvaser_usb_leaf_m16c_bittiming_const = { + .name = "kvaser_usb_ucii", + .tseg1_min = 4, + .tseg1_max = 16, + .tseg2_min = 2, + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 16, + .brp_inc = 1, }; -static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_8mhz = { +static const struct can_bittiming_const kvaser_usb_leaf_m32c_bittiming_const = { + .name = "kvaser_usb_leaf", + .tseg1_min = 3, + .tseg1_max = 16, + .tseg2_min = 2, + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 2, + .brp_max = 128, + .brp_inc = 2, +}; + +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_usbcan_dev_cfg = { .clock = { .freq = 8000000, }, .timestamp_freq = 1, - .bittiming_const = &kvaser_usb_leaf_bittiming_const, + .bittiming_const = &kvaser_usb_leaf_m16c_bittiming_const, }; -static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_16mhz = { +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_m32c_dev_cfg = { .clock = { .freq = 16000000, }, .timestamp_freq = 1, - .bittiming_const = &kvaser_usb_leaf_bittiming_const, + .bittiming_const = &kvaser_usb_leaf_m32c_bittiming_const, }; -static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_24mhz = { +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_16mhz = { + .clock = { + .freq = 16000000, + }, + .timestamp_freq = 1, + .bittiming_const = &kvaser_usb_flexc_bittiming_const, +}; + +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_24mhz = { .clock = { .freq = 24000000, }, .timestamp_freq = 1, - .bittiming_const = &kvaser_usb_leaf_bittiming_const, + .bittiming_const = &kvaser_usb_flexc_bittiming_const, }; -static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_32mhz = { +static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_32mhz = { .clock = { .freq = 32000000, }, .timestamp_freq = 1, - .bittiming_const = &kvaser_usb_leaf_bittiming_const, + .bittiming_const = &kvaser_usb_flexc_bittiming_const, }; static void * @@ -529,17 +539,17 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev, /* Firmware expects bittiming parameters calculated for 16MHz * clock, regardless of the actual clock */ - dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz; + dev->cfg = &kvaser_usb_leaf_m32c_dev_cfg; } else { switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) { case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK: - dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz; + dev->cfg = &kvaser_usb_leaf_imx_dev_cfg_16mhz; break; case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK: - dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz; + dev->cfg = &kvaser_usb_leaf_imx_dev_cfg_24mhz; break; case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK: - dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz; + dev->cfg = &kvaser_usb_leaf_imx_dev_cfg_32mhz; break; } } @@ -566,7 +576,7 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev) dev->fw_version = le32_to_cpu(cmd.u.usbcan.softinfo.fw_version); dev->max_tx_urbs = le16_to_cpu(cmd.u.usbcan.softinfo.max_outstanding_tx); - dev->cfg = &kvaser_usb_leaf_dev_cfg_8mhz; + dev->cfg = &kvaser_usb_leaf_usbcan_dev_cfg; break; } From e14930e9f9c657cf109326752871d3c701b12326 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 7 Jul 2022 16:07:53 -0700 Subject: [PATCH 24/56] xfs: remove incorrect ASSERT in xfs_rename commit e445976537ad139162980bee015b7364e5b64fff upstream. This ASSERT in xfs_rename is a) incorrect, because (RENAME_WHITEOUT|RENAME_NOREPLACE) is a valid combination, and b) unnecessary, because actual invalid flag combinations are already handled at the vfs level in do_renameat2() before we get called. So, remove it. Reported-by: Paolo Bonzini Signed-off-by: Eric Sandeen Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Fixes: 7dcf5c3e4527 ("xfs: add RENAME_WHITEOUT support") Signed-off-by: Kuniyuki Iwashima Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_inode.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index e958b1c74561..03497741aef7 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3170,7 +3170,6 @@ xfs_rename( * appropriately. */ if (flags & RENAME_WHITEOUT) { - ASSERT(!(flags & (RENAME_NOREPLACE | RENAME_EXCHANGE))); error = xfs_rename_alloc_whiteout(target_dp, &wip); if (error) return error; From 3d90607e7e6afa89768b0aaa915b58bd2b849276 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 12 May 2022 06:16:10 +0400 Subject: [PATCH 25/56] ARM: meson: Fix refcount leak in meson_smp_prepare_cpus [ Upstream commit 34d2cd3fccced12b958b8848e3eff0ee4296764c ] of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: d850f3e5d296 ("ARM: meson: Add SMP bringup code for Meson8 and Meson8b") Signed-off-by: Miaoqian Lin Reviewed-by: Martin Blumenstingl Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220512021611.47921-1-linmq006@gmail.com Signed-off-by: Sasha Levin --- arch/arm/mach-meson/platsmp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c index 4b8ad728bb42..32ac60b89fdc 100644 --- a/arch/arm/mach-meson/platsmp.c +++ b/arch/arm/mach-meson/platsmp.c @@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, } sram_base = of_iomap(node, 0); + of_node_put(node); if (!sram_base) { pr_err("Couldn't map SRAM registers\n"); return; @@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, } scu_base = of_iomap(node, 0); + of_node_put(node); if (!scu_base) { pr_err("Couldn't map SCU registers\n"); return; From 2c0d10ce002aca369605d88898623c0bece1576a Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Wed, 25 May 2022 21:49:56 -0500 Subject: [PATCH 26/56] pinctrl: sunxi: a83t: Fix NAND function name for some pins [ Upstream commit aaefa29270d9551b604165a08406543efa9d16f5 ] The other NAND pins on Port C use the "nand0" function name. "nand0" also matches all of the other Allwinner SoCs. Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Signed-off-by: Samuel Holland Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220526024956.49500-1-samuel@sholland.org Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c index 4ada80317a3b..b5c1a8f363f3 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c @@ -158,26 +158,26 @@ static const struct sunxi_desc_pin sun8i_a83t_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "nand"), /* DQ6 */ + SUNXI_FUNCTION(0x2, "nand0"), /* DQ6 */ SUNXI_FUNCTION(0x3, "mmc2")), /* D6 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "nand"), /* DQ7 */ + SUNXI_FUNCTION(0x2, "nand0"), /* DQ7 */ SUNXI_FUNCTION(0x3, "mmc2")), /* D7 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "nand"), /* DQS */ + SUNXI_FUNCTION(0x2, "nand0"), /* DQS */ SUNXI_FUNCTION(0x3, "mmc2")), /* RST */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 17), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "nand")), /* CE2 */ + SUNXI_FUNCTION(0x2, "nand0")), /* CE2 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 18), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "nand")), /* CE3 */ + SUNXI_FUNCTION(0x2, "nand0")), /* CE3 */ /* Hole */ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2), SUNXI_FUNCTION(0x0, "gpio_in"), From 6bf74a1e748fff9413a330775454871ba0936643 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 1 May 2022 20:40:16 +0200 Subject: [PATCH 27/56] arm64: dts: qcom: msm8994: Fix CPU6/7 reg values [ Upstream commit 47bf59c4755930f616dd90c8c6a85f40a6d347ea ] CPU6 and CPU7 were mistakengly pointing to CPU5 reg. Fix it. Fixes: 02d8091bbca0 ("arm64: dts: qcom: msm8994: Add a proper CPU map") Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220501184016.64138-1-konrad.dybcio@somainline.org Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 297408b947ff..aeb5762566e9 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -92,7 +92,7 @@ CPU6: cpu@102 { device_type = "cpu"; compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; + reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&L2_1>; }; @@ -100,7 +100,7 @@ CPU7: cpu@103 { device_type = "cpu"; compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; + reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&L2_1>; }; From 43319ee6a07516afc5e6926441dbd8da1fb4ab98 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 22 Jun 2022 14:13:57 +0800 Subject: [PATCH 28/56] arm64: dts: imx8mp-evk: correct mmc pad settings [ Upstream commit 01785f1f156511c4f285786b4192245d4f476bf1 ] According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Signed-off-by: Peng Fan Reviewed-by: Rasmus Villemoes Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index c13b4a02d12f..64f0455e14f8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -161,7 +161,7 @@ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < - MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 >; }; @@ -180,7 +180,7 @@ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 >; }; @@ -192,7 +192,7 @@ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 >; }; @@ -204,7 +204,7 @@ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 >; }; From 17b3883ba55f1e4f76bc676dfb284055e0f4d4df Mon Sep 17 00:00:00 2001 From: Sherry Sun Date: Wed, 22 Jun 2022 14:13:58 +0800 Subject: [PATCH 29/56] arm64: dts: imx8mp-evk: correct the uart2 pinctl value [ Upstream commit 2d4fb72b681205eed4553d8802632bd3270be3ba ] According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should enable the pull up, so need to set bit8 to 1. The original pinctl value 0x49 is incorrect and needs to be changed to 0x140, same as uart1 and uart3. Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Reviewed-by: Haibo Chen Signed-off-by: Sherry Sun Signed-off-by: Peng Fan Reviewed-by: Rasmus Villemoes Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 64f0455e14f8..5011adb5ff1f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -167,8 +167,8 @@ pinctrl_uart2: uart2grp { fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 >; }; From 2ade1b1d92f674063ec5e4008bb6353392d771a4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 22 Jun 2022 14:13:59 +0800 Subject: [PATCH 30/56] arm64: dts: imx8mp-evk: correct gpio-led pad settings [ Upstream commit b838582ab8d5fb11b2c0275056a9f34e1d94fece ] 0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Correct setting with PE PUE set, DSE set to 0. Fixes: 50d336b12f34 ("arm64: dts: imx8mp-evk: Add GPIO LED support") Signed-off-by: Peng Fan Reviewed-by: Rasmus Villemoes Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 5011adb5ff1f..c0663a6c8376 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -148,7 +148,7 @@ pinctrl_gpio_led: gpioledgrp { fsl,pins = < - MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140 >; }; From e1cda2a03d81560ac0badb5fce3aae66bc8a4ae3 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 22 Jun 2022 14:14:05 +0800 Subject: [PATCH 31/56] arm64: dts: imx8mp-evk: correct I2C3 pad settings [ Upstream commit 0836de513ebaae5f03014641eac996290d67493d ] According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5e4a67ff7f69 ("arm64: dts: imx8mp-evk: Add i2c3 support") Signed-off-by: Peng Fan Reviewed-by: Rasmus Villemoes Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index c0663a6c8376..c016f5b7d24a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -154,8 +154,8 @@ pinctrl_i2c3: i2c3grp { fsl,pins = < - MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 - MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3 + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 >; }; From 1d0c3ced2d1c1c0858ee042d29d4c9ed07d987bf Mon Sep 17 00:00:00 2001 From: Andrei Lalaev Date: Wed, 25 May 2022 22:04:25 +0300 Subject: [PATCH 32/56] pinctrl: sunxi: sunxi_pconf_set: use correct offset [ Upstream commit cd4c1e65a32afd003b08ad4aafe1e4d3e4e8e61b ] Some Allwinner SoCs have 2 pinctrls (PIO and R_PIO). Previous implementation used absolute pin numbering and it was incorrect for R_PIO pinctrl. It's necessary to take into account the base pin number. Fixes: 90be64e27621 ("pinctrl: sunxi: implement pin_config_set") Signed-off-by: Andrei Lalaev Reviewed-by: Samuel Holland Link: https://lore.kernel.org/r/20220525190423.410609-1-andrey.lalaev@gmail.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index be7f4f95f455..24c861434bf1 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -544,6 +544,8 @@ static int sunxi_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); int i; + pin -= pctl->desc->pin_base; + for (i = 0; i < num_configs; i++) { enum pin_config_param param; unsigned long flags; From 4c3e73a66a2775723e1c5960424894d8a3394d09 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 27 Jun 2022 15:59:38 +0200 Subject: [PATCH 33/56] arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo [ Upstream commit 5fb779558f1c97e2bf2794cb59553e569c38e2f9 ] "make dtbs_check" complains about the missing "-supply" suffix for vdd_lvs1_2 which is clearly a typo, originally introduced in the msm8994-smd-rpm.dtsi file and apparently later copied to msm8992-xiaomi-libra.dts: msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml Reported-by: Rob Herring Cc: Konrad Dybcio Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992") Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree") Signed-off-by: Stephan Gerhold Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts | 2 +- arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index cb82864a90ef..42f2b235011f 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -64,7 +64,7 @@ vdd_l17_29-supply = <&vreg_vph_pwr>; vdd_l20_21-supply = <&vreg_vph_pwr>; vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; + vdd_lvs1_2-supply = <&pm8994_s4>; pm8994_s1: s1 { regulator-min-microvolt = <800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 4f64ca3ea1ef..6ed2a9c01e8c 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -151,7 +151,7 @@ vdd_l17_29-supply = <&vreg_vph_pwr>; vdd_l20_21-supply = <&vreg_vph_pwr>; vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; + vdd_lvs1_2-supply = <&pm8994_s4>; pm8994_s1: s1 { /* unused */ From b40ac801cbb11c161f2901bfab39aa42f0e73d4d Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 23 May 2022 12:24:19 +0300 Subject: [PATCH 34/56] ARM: at91: pm: use proper compatible for sama5d2's rtc [ Upstream commit ddc980da8043779119acaca106c6d9b445c9b65b ] Use proper compatible strings for SAMA5D2's RTC IPs. This is necessary for configuring wakeup sources for ULP1 PM mode. Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220523092421.317345-2-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin --- arch/arm/mach-at91/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 3f015cb6ec2b..6a68ff0466e0 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -104,7 +104,7 @@ static const struct wakeup_source_info ws_info[] = { static const struct of_device_id sama5d2_ws_ids[] = { { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, - { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] }, { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, From ade03e5ea7782915b917bd36cb28737cdcfa1946 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 23 May 2022 12:24:20 +0300 Subject: [PATCH 35/56] ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt [ Upstream commit 641522665dbb25ce117c78746df1aad8b58c80e5 ] Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: eaedc0d379da ("ARM: at91: pm: add ULP1 support for SAM9X60") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220523092421.317345-3-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin --- arch/arm/mach-at91/pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 6a68ff0466e0..f2ce2d094925 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -115,12 +115,12 @@ static const struct of_device_id sama5d2_ws_ids[] = { }; static const struct of_device_id sam9x60_ws_ids[] = { - { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, + { .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, { .compatible = "usb-ehci", .data = &ws_info[2] }, - { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] }, { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] }, { /* sentinel */ } }; From 9b7d8e28b686d57e734c3f4877a7acd6f037cf59 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Tue, 7 Jun 2022 12:04:54 +0300 Subject: [PATCH 36/56] ARM: dts: at91: sam9x60ek: fix eeprom compatible and size [ Upstream commit f2cbbc3f926316ccf8ef9363d8a60c1110afc1c7 ] The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory, so it's compatible with at24c02 not at24c32. Also the size property is wrong, it's not 128 bytes, but 256 bytes. Thus removing and leaving it to the default (256). Fixes: 1e5f532c27371 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Eugen Hristev Reviewed-by: Claudiu Beznea Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com Signed-off-by: Sasha Levin --- arch/arm/boot/dts/at91-sam9x60ek.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index b1068cca4228..fd8dc1183b3e 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -233,10 +233,9 @@ status = "okay"; eeprom@53 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; - size = <128>; status = "okay"; }; }; From 87d2bb888259936125106e0e071b883f940658b4 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Tue, 7 Jun 2022 12:04:55 +0300 Subject: [PATCH 37/56] ARM: dts: at91: sama5d2_icp: fix eeprom compatibles [ Upstream commit 416ce193d73a734ded6d09fe141017b38af1c567 ] The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits and are compatible with at24c02 not at24c32. Fixes: 68a95ef72cefe ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Eugen Hristev Reviewed-by: Claudiu Beznea Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com Signed-off-by: Sasha Levin --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 308d472bd104..634411d13b4a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -317,21 +317,21 @@ status = "okay"; eeprom@50 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; status = "okay"; }; eeprom@52 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; status = "disabled"; }; eeprom@53 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; status = "disabled"; From 5561bddd0599aa94a20036db7d7c495556771757 Mon Sep 17 00:00:00 2001 From: Ivan Malov Date: Tue, 28 Jun 2022 12:18:48 +0300 Subject: [PATCH 38/56] xsk: Clear page contiguity bit when unmapping pool [ Upstream commit 512d1999b8e94a5d43fba3afc73e774849674742 ] When a XSK pool gets mapped, xp_check_dma_contiguity() adds bit 0x1 to pages' DMA addresses that go in ascending order and at 4K stride. The problem is that the bit does not get cleared before doing unmap. As a result, a lot of warnings from iommu_dma_unmap_page() are seen in dmesg, which indicates that lookups by iommu_iova_to_phys() fail. Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API") Signed-off-by: Ivan Malov Signed-off-by: Daniel Borkmann Acked-by: Magnus Karlsson Link: https://lore.kernel.org/bpf/20220628091848.534803-1-ivan.malov@oktetlabs.ru Signed-off-by: Sasha Levin --- net/xdp/xsk_buff_pool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c index 2ef6f926610e..e63a285a9856 100644 --- a/net/xdp/xsk_buff_pool.c +++ b/net/xdp/xsk_buff_pool.c @@ -318,6 +318,7 @@ static void __xp_dma_unmap(struct xsk_dma_map *dma_map, unsigned long attrs) for (i = 0; i < dma_map->dma_pages_cnt; i++) { dma = &dma_map->dma_pages[i]; if (*dma) { + *dma &= ~XSK_NEXT_PG_CONTIG_MASK; dma_unmap_page_attrs(dma_map->dev, *dma, PAGE_SIZE, DMA_BIDIRECTIONAL, attrs); *dma = 0; From 2b4659c145bafe3cdaf2a2cde08fd34b7ecbbba5 Mon Sep 17 00:00:00 2001 From: Lukasz Cieplicki Date: Tue, 31 May 2022 12:54:20 +0200 Subject: [PATCH 39/56] i40e: Fix dropped jumbo frames statistics [ Upstream commit 1adb1563e7b7ec659379a18e607e8bc3522d8a78 ] Dropped packets caused by too large frames were not included in dropped RX packets statistics. Issue was caused by not reading the GL_RXERR1 register. That register stores count of packet which was have been dropped due to too large size. Fix it by reading GL_RXERR1 register for each interface. Repro steps: Send a packet larger than the set MTU to SUT Observe rx statists: ethtool -S | grep rx | grep -v ": 0" Fixes: 41a9e55c89be ("i40e: add missing VSI statistics") Signed-off-by: Lukasz Cieplicki Signed-off-by: Jedrzej Jagielski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/i40e/i40e.h | 16 ++++ drivers/net/ethernet/intel/i40e/i40e_main.c | 73 +++++++++++++++++++ .../net/ethernet/intel/i40e/i40e_register.h | 13 ++++ drivers/net/ethernet/intel/i40e/i40e_type.h | 1 + 4 files changed, 103 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index effdc3361266..dd630b6bc74b 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -37,6 +37,7 @@ #include #include #include +#include #include "i40e_type.h" #include "i40e_prototype.h" #include @@ -991,6 +992,21 @@ static inline void i40e_write_fd_input_set(struct i40e_pf *pf, (u32)(val & 0xFFFFFFFFULL)); } +/** + * i40e_get_pf_count - get PCI PF count. + * @hw: pointer to a hw. + * + * Reports the function number of the highest PCI physical + * function plus 1 as it is loaded from the NVM. + * + * Return: PCI PF count. + **/ +static inline u32 i40e_get_pf_count(struct i40e_hw *hw) +{ + return FIELD_GET(I40E_GLGEN_PCIFCNCNT_PCIPFCNT_MASK, + rd32(hw, I40E_GLGEN_PCIFCNCNT)); +} + /* needed by i40e_ethtool.c */ int i40e_up(struct i40e_vsi *vsi); void i40e_down(struct i40e_vsi *vsi); diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 614f3e995100..58453f7958df 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -548,6 +548,47 @@ void i40e_pf_reset_stats(struct i40e_pf *pf) pf->hw_csum_rx_error = 0; } +/** + * i40e_compute_pci_to_hw_id - compute index form PCI function. + * @vsi: ptr to the VSI to read from. + * @hw: ptr to the hardware info. + **/ +static u32 i40e_compute_pci_to_hw_id(struct i40e_vsi *vsi, struct i40e_hw *hw) +{ + int pf_count = i40e_get_pf_count(hw); + + if (vsi->type == I40E_VSI_SRIOV) + return (hw->port * BIT(7)) / pf_count + vsi->vf_id; + + return hw->port + BIT(7); +} + +/** + * i40e_stat_update64 - read and update a 64 bit stat from the chip. + * @hw: ptr to the hardware info. + * @hireg: the high 32 bit reg to read. + * @loreg: the low 32 bit reg to read. + * @offset_loaded: has the initial offset been loaded yet. + * @offset: ptr to current offset value. + * @stat: ptr to the stat. + * + * Since the device stats are not reset at PFReset, they will not + * be zeroed when the driver starts. We'll save the first values read + * and use them as offsets to be subtracted from the raw values in order + * to report stats that count from zero. + **/ +static void i40e_stat_update64(struct i40e_hw *hw, u32 hireg, u32 loreg, + bool offset_loaded, u64 *offset, u64 *stat) +{ + u64 new_data; + + new_data = rd64(hw, loreg); + + if (!offset_loaded || new_data < *offset) + *offset = new_data; + *stat = new_data - *offset; +} + /** * i40e_stat_update48 - read and update a 48 bit stat from the chip * @hw: ptr to the hardware info @@ -619,6 +660,34 @@ static void i40e_stat_update_and_clear32(struct i40e_hw *hw, u32 reg, u64 *stat) *stat += new_data; } +/** + * i40e_stats_update_rx_discards - update rx_discards. + * @vsi: ptr to the VSI to be updated. + * @hw: ptr to the hardware info. + * @stat_idx: VSI's stat_counter_idx. + * @offset_loaded: ptr to the VSI's stat_offsets_loaded. + * @stat_offset: ptr to stat_offset to store first read of specific register. + * @stat: ptr to VSI's stat to be updated. + **/ +static void +i40e_stats_update_rx_discards(struct i40e_vsi *vsi, struct i40e_hw *hw, + int stat_idx, bool offset_loaded, + struct i40e_eth_stats *stat_offset, + struct i40e_eth_stats *stat) +{ + u64 rx_rdpc, rx_rxerr; + + i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx), offset_loaded, + &stat_offset->rx_discards, &rx_rdpc); + i40e_stat_update64(hw, + I40E_GL_RXERR1H(i40e_compute_pci_to_hw_id(vsi, hw)), + I40E_GL_RXERR1L(i40e_compute_pci_to_hw_id(vsi, hw)), + offset_loaded, &stat_offset->rx_discards_other, + &rx_rxerr); + + stat->rx_discards = rx_rdpc + rx_rxerr; +} + /** * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters. * @vsi: the VSI to be updated @@ -678,6 +747,10 @@ void i40e_update_eth_stats(struct i40e_vsi *vsi) I40E_GLV_BPTCL(stat_idx), vsi->stat_offsets_loaded, &oes->tx_broadcast, &es->tx_broadcast); + + i40e_stats_update_rx_discards(vsi, hw, stat_idx, + vsi->stat_offsets_loaded, oes, es); + vsi->stat_offsets_loaded = true; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8335f151ceef..117fd9674d7f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -77,6 +77,11 @@ #define I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT 0 #define I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT 16 #define I40E_GLGEN_MSRWD_MDIRDDATA_MASK I40E_MASK(0xFFFF, I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT) +#define I40E_GLGEN_PCIFCNCNT 0x001C0AB4 /* Reset: PCIR */ +#define I40E_GLGEN_PCIFCNCNT_PCIPFCNT_SHIFT 0 +#define I40E_GLGEN_PCIFCNCNT_PCIPFCNT_MASK I40E_MASK(0x1F, I40E_GLGEN_PCIFCNCNT_PCIPFCNT_SHIFT) +#define I40E_GLGEN_PCIFCNCNT_PCIVFCNT_SHIFT 16 +#define I40E_GLGEN_PCIFCNCNT_PCIVFCNT_MASK I40E_MASK(0xFF, I40E_GLGEN_PCIFCNCNT_PCIVFCNT_SHIFT) #define I40E_GLGEN_RSTAT 0x000B8188 /* Reset: POR */ #define I40E_GLGEN_RSTAT_DEVSTATE_SHIFT 0 #define I40E_GLGEN_RSTAT_DEVSTATE_MASK I40E_MASK(0x3, I40E_GLGEN_RSTAT_DEVSTATE_SHIFT) @@ -461,6 +466,14 @@ #define I40E_VFQF_HKEY1_MAX_INDEX 12 #define I40E_VFQF_HLUT1(_i, _VF) (0x00220000 + ((_i) * 1024 + (_VF) * 4)) /* _i=0...15, _VF=0...127 */ /* Reset: CORER */ #define I40E_VFQF_HLUT1_MAX_INDEX 15 +#define I40E_GL_RXERR1H(_i) (0x00318004 + ((_i) * 8)) /* _i=0...143 */ /* Reset: CORER */ +#define I40E_GL_RXERR1H_MAX_INDEX 143 +#define I40E_GL_RXERR1H_RXERR1H_SHIFT 0 +#define I40E_GL_RXERR1H_RXERR1H_MASK I40E_MASK(0xFFFFFFFF, I40E_GL_RXERR1H_RXERR1H_SHIFT) +#define I40E_GL_RXERR1L(_i) (0x00318000 + ((_i) * 8)) /* _i=0...143 */ /* Reset: CORER */ +#define I40E_GL_RXERR1L_MAX_INDEX 143 +#define I40E_GL_RXERR1L_RXERR1L_SHIFT 0 +#define I40E_GL_RXERR1L_RXERR1L_MASK I40E_MASK(0xFFFFFFFF, I40E_GL_RXERR1L_RXERR1L_SHIFT) #define I40E_GLPRT_BPRCH(_i) (0x003005E4 + ((_i) * 8)) /* _i=0...3 */ /* Reset: CORER */ #define I40E_GLPRT_BPRCL(_i) (0x003005E0 + ((_i) * 8)) /* _i=0...3 */ /* Reset: CORER */ #define I40E_GLPRT_BPTCH(_i) (0x00300A04 + ((_i) * 8)) /* _i=0...3 */ /* Reset: CORER */ diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h index add67f7b73e8..446672a7e39f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_type.h +++ b/drivers/net/ethernet/intel/i40e/i40e_type.h @@ -1172,6 +1172,7 @@ struct i40e_eth_stats { u64 tx_broadcast; /* bptc */ u64 tx_discards; /* tdpc */ u64 tx_errors; /* tepc */ + u64 rx_discards_other; /* rxerr1 */ }; /* Statistics collected per VEB per TC */ From 23cdc57d88d14d76f2bf0c9d747ef2508858d7e5 Mon Sep 17 00:00:00 2001 From: Rick Lindsley Date: Sat, 2 Jul 2022 03:37:12 -0700 Subject: [PATCH 40/56] ibmvnic: Properly dispose of all skbs during a failover. [ Upstream commit 1b18f09d31cfa7148df15a7d5c5e0e86f105f7d1 ] During a reset, there may have been transmits in flight that are no longer valid and cannot be fulfilled. Resetting and clearing the queues is insufficient; each skb also needs to be explicitly freed so that upper levels are not left waiting for confirmation of a transmit that will never happen. If this happens frequently enough, the apparent backlog will cause TCP to begin "congestion control" unnecessarily, culminating in permanently decreased throughput. Fixes: d7c0ef36bde03 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change") Tested-by: Nick Child Reviewed-by: Brian King Signed-off-by: Rick Lindsley Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/ibm/ibmvnic.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 61fb2a092451..7fe2e47dc83d 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -5228,6 +5228,15 @@ static int ibmvnic_reset_init(struct ibmvnic_adapter *adapter, bool reset) release_sub_crqs(adapter, 0); rc = init_sub_crqs(adapter); } else { + /* no need to reinitialize completely, but we do + * need to clean up transmits that were in flight + * when we processed the reset. Failure to do so + * will confound the upper layer, usually TCP, by + * creating the illusion of transmits that are + * awaiting completion. + */ + clean_tx_pools(adapter); + rc = reset_sub_crq_queues(adapter); } } else { From 859b889029fc55261003f4eea2e8527c91b9b7aa Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 3 Jul 2022 10:36:24 +0300 Subject: [PATCH 41/56] selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLT [ Upstream commit b8e629b05f5d23f9649c901bef09fab8b0c2e4b9 ] As mentioned in the blamed commit, flood_unicast_test() works by checking the match count on a tc filter placed on the receiving interface. But the second host interface (host2_if) has no interest in receiving a packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even before the ingress tc filter gets to be executed. So we will incorrectly get the message "Packet was not flooded when should", when in fact, the packet was flooded as expected but dropped due to an unrelated reason, at some other layer on the receiving side. Force h2 to accept this packet by temporarily placing it in promiscuous mode. Alternatively we could either deliver to its MAC address or use tcpdump_start, but this has the fewest complications. This fixes the "flooding" test from bridge_vlan_aware.sh and bridge_vlan_unaware.sh, which calls flood_test from the lib. Fixes: 236dd50bf67a ("selftests: forwarding: Add a test for flooded traffic") Signed-off-by: Vladimir Oltean Reviewed-by: Ido Schimmel Tested-by: Ido Schimmel Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- tools/testing/selftests/net/forwarding/lib.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index be6fa808d219..094a1104e49d 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -1129,6 +1129,7 @@ flood_test_do() # Add an ACL on `host2_if` which will tell us whether the packet # was flooded to it or not. + ip link set $host2_if promisc on tc qdisc add dev $host2_if ingress tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop @@ -1146,6 +1147,7 @@ flood_test_do() tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower tc qdisc del dev $host2_if ingress + ip link set $host2_if promisc off return $err } From 9906c223400fbad19c73605b7b0cf7b14b3ac82f Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 3 Jul 2022 10:36:25 +0300 Subject: [PATCH 42/56] selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLT [ Upstream commit 1a635d3e1c80626237fdae47a5545b6655d8d81c ] The first host interface has by default no interest in receiving packets MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc filter and this might confuse the selftest. Enable promiscuous mode such that the filter properly counts received packets. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean Reviewed-by: Ido Schimmel Tested-by: Ido Schimmel Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- tools/testing/selftests/net/forwarding/lib.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 094a1104e49d..fbda7603f3b3 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -1063,6 +1063,7 @@ learning_test() # FDB entry was installed. bridge link set dev $br_port1 flood off + ip link set $host1_if promisc on tc qdisc add dev $host1_if ingress tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop @@ -1112,6 +1113,7 @@ learning_test() tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower tc qdisc del dev $host1_if ingress + ip link set $host1_if promisc off bridge link set dev $br_port1 flood on From 904f622ec78e0c59d36554f0524956fb43b18dc7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 3 Jul 2022 10:36:26 +0300 Subject: [PATCH 43/56] selftests: forwarding: fix error message in learning_test [ Upstream commit 83844aacab2015da1dba1df0cc61fc4b4c4e8076 ] When packets are not received, they aren't received on $host1_if, so the message talking about the second host not receiving them is incorrect. Fix it. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean Reviewed-by: Ido Schimmel Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- tools/testing/selftests/net/forwarding/lib.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index fbda7603f3b3..54020d05a62b 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -1074,7 +1074,7 @@ learning_test() tc -j -s filter show dev $host1_if ingress \ | jq -e ".[] | select(.options.handle == 101) \ | select(.options.actions[0].stats.packets == 1)" &> /dev/null - check_fail $? "Packet reached second host when should not" + check_fail $? "Packet reached first host when should not" $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q sleep 1 From 26938bd28c0c1d177e85db83659766968a8a59d9 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 5 Jul 2022 21:15:22 +0200 Subject: [PATCH 44/56] r8169: fix accessing unset transport header [ Upstream commit faa4e04e5e140a6d02260289a8fba8fd8d7a3003 ] 66e4c8d95008 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed68187 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4de3ed ("r8169: work around RTL8125 UDP hw bug") Reported-by: Erhard F. Tested-by: Erhard F. Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/realtek/r8169_main.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 5eac3f494d9e..c025dadcce28 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4183,7 +4183,6 @@ static void rtl8169_tso_csum_v1(struct sk_buff *skb, u32 *opts) static bool rtl8169_tso_csum_v2(struct rtl8169_private *tp, struct sk_buff *skb, u32 *opts) { - u32 transport_offset = (u32)skb_transport_offset(skb); struct skb_shared_info *shinfo = skb_shinfo(skb); u32 mss = shinfo->gso_size; @@ -4200,7 +4199,7 @@ static bool rtl8169_tso_csum_v2(struct rtl8169_private *tp, WARN_ON_ONCE(1); } - opts[0] |= transport_offset << GTTCPHO_SHIFT; + opts[0] |= skb_transport_offset(skb) << GTTCPHO_SHIFT; opts[1] |= mss << TD1_MSS_SHIFT; } else if (skb->ip_summed == CHECKSUM_PARTIAL) { u8 ip_protocol; @@ -4228,7 +4227,7 @@ static bool rtl8169_tso_csum_v2(struct rtl8169_private *tp, else WARN_ON_ONCE(1); - opts[1] |= transport_offset << TCPHO_SHIFT; + opts[1] |= skb_transport_offset(skb) << TCPHO_SHIFT; } else { unsigned int padto = rtl_quirk_packet_padto(tp, skb); @@ -4401,14 +4400,13 @@ static netdev_features_t rtl8169_features_check(struct sk_buff *skb, struct net_device *dev, netdev_features_t features) { - int transport_offset = skb_transport_offset(skb); struct rtl8169_private *tp = netdev_priv(dev); if (skb_is_gso(skb)) { if (tp->mac_version == RTL_GIGA_MAC_VER_34) features = rtl8168evl_fix_tso(skb, features); - if (transport_offset > GTTCPHO_MAX && + if (skb_transport_offset(skb) > GTTCPHO_MAX && rtl_chip_supports_csum_v2(tp)) features &= ~NETIF_F_ALL_TSO; } else if (skb->ip_summed == CHECKSUM_PARTIAL) { @@ -4419,7 +4417,7 @@ static netdev_features_t rtl8169_features_check(struct sk_buff *skb, if (rtl_quirk_packet_padto(tp, skb)) features &= ~NETIF_F_CSUM_MASK; - if (transport_offset > TCPHO_MAX && + if (skb_transport_offset(skb) > TCPHO_MAX && rtl_chip_supports_csum_v2(tp)) features &= ~NETIF_F_CSUM_MASK; } From 9b329edd77cae63cdc59aaa87b0cb81c8a471291 Mon Sep 17 00:00:00 2001 From: Satish Nagireddy Date: Tue, 28 Jun 2022 12:12:16 -0700 Subject: [PATCH 45/56] i2c: cadence: Unregister the clk notifier in error path [ Upstream commit 3501f0c663063513ad604fb1b3f06af637d3396d ] This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy Tested-by: Lars-Peter Clausen Reviewed-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-cadence.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 50e3ddba52ba..01564bd96c62 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -1289,6 +1289,7 @@ static int cdns_i2c_probe(struct platform_device *pdev) return 0; err_clk_dis: + clk_notifier_unregister(id->clk, &id->clk_rate_change_nb); clk_disable_unprepare(id->clk); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); From 86884017bb634070ffe8be5c35bb09d1da27d98c Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Mon, 6 Jun 2022 17:10:34 +0100 Subject: [PATCH 46/56] dmaengine: imx-sdma: Allow imx8m for imx7 FW revs commit a7cd3cf0b2e5aaacfe5e02c472bd28e98e640be7 upstream. The revision of the imx-sdma IP that is in the i.MX8M series is the same is that as that in the i.MX7 series but the imx7d MODULE_FIRMWARE directive is wrapped in a condiditional which means it's not defined when built for aarch64 SOC_IMX8M platforms and hence you get the following errors when the driver loads on imx8m devices: imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware Add the SOC_IMX8M into the check so the firmware can load on i.MX8. Fixes: 1474d48bd639 ("arm64: dts: imx8mq: Add SDMA nodes") Fixes: 941acd566b18 ("dmaengine: imx-sdma: Only check ratio on parts that support 1:1") Signed-off-by: Peter Robinson Cc: stable@vger.kernel.org # v5.2+ Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20220606161034.3544803-1-pbrobinson@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- drivers/dma/imx-sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 792c91cd1608..2283dcd8bf91 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -2212,7 +2212,7 @@ MODULE_DESCRIPTION("i.MX SDMA driver"); #if IS_ENABLED(CONFIG_SOC_IMX6Q) MODULE_FIRMWARE("imx/sdma/sdma-imx6q.bin"); #endif -#if IS_ENABLED(CONFIG_SOC_IMX7D) +#if IS_ENABLED(CONFIG_SOC_IMX7D) || IS_ENABLED(CONFIG_SOC_IMX8M) MODULE_FIRMWARE("imx/sdma/sdma-imx7d.bin"); #endif MODULE_LICENSE("GPL"); From af7d9d4abe848d5cb0143d4535b93aa1916086b0 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 30 Jun 2022 20:32:55 -0600 Subject: [PATCH 47/56] misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer commit eb7f8e28420372787933eec079735c35034bda7d upstream. rtsx_usb driver allocates coherent dma buffer for urb transfers. This buffer is passed to usb_bulk_msg() and usb core tries to map already mapped buffer running into a dma mapping error. xhci_hcd 0000:01:00.0: rejecting DMA map of vmalloc memory WARNING: CPU: 1 PID: 279 at include/linux/dma-mapping.h:326 usb_ hcd_map_urb_for_dma+0x7d6/0x820 ... xhci_map_urb_for_dma+0x291/0x4e0 usb_hcd_submit_urb+0x199/0x12b0 ... usb_submit_urb+0x3b8/0x9e0 usb_start_wait_urb+0xe3/0x2d0 usb_bulk_msg+0x115/0x240 rtsx_usb_transfer_data+0x185/0x1a8 [rtsx_usb] rtsx_usb_send_cmd+0xbb/0x123 [rtsx_usb] rtsx_usb_write_register+0x12c/0x143 [rtsx_usb] rtsx_usb_probe+0x226/0x4b2 [rtsx_usb] Fix it to use kmalloc() to get DMA-able memory region instead. Signed-off-by: Shuah Khan Cc: stable Link: https://lore.kernel.org/r/667d627d502e1ba9ff4f9b94966df3299d2d3c0d.1656642167.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cardreader/rtsx_usb.c | 13 +++++++------ include/linux/rtsx_usb.h | 1 - 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c index 1ef9b61077c4..e147cc8ab0fd 100644 --- a/drivers/misc/cardreader/rtsx_usb.c +++ b/drivers/misc/cardreader/rtsx_usb.c @@ -631,8 +631,7 @@ static int rtsx_usb_probe(struct usb_interface *intf, ucr->pusb_dev = usb_dev; - ucr->iobuf = usb_alloc_coherent(ucr->pusb_dev, IOBUF_SIZE, - GFP_KERNEL, &ucr->iobuf_dma); + ucr->iobuf = kmalloc(IOBUF_SIZE, GFP_KERNEL); if (!ucr->iobuf) return -ENOMEM; @@ -668,8 +667,9 @@ static int rtsx_usb_probe(struct usb_interface *intf, out_init_fail: usb_set_intfdata(ucr->pusb_intf, NULL); - usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf, - ucr->iobuf_dma); + kfree(ucr->iobuf); + ucr->iobuf = NULL; + ucr->cmd_buf = ucr->rsp_buf = NULL; return ret; } @@ -682,8 +682,9 @@ static void rtsx_usb_disconnect(struct usb_interface *intf) mfd_remove_devices(&intf->dev); usb_set_intfdata(ucr->pusb_intf, NULL); - usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf, - ucr->iobuf_dma); + kfree(ucr->iobuf); + ucr->iobuf = NULL; + ucr->cmd_buf = ucr->rsp_buf = NULL; } #ifdef CONFIG_PM diff --git a/include/linux/rtsx_usb.h b/include/linux/rtsx_usb.h index 159729cffd8e..a07f7341ebc2 100644 --- a/include/linux/rtsx_usb.h +++ b/include/linux/rtsx_usb.h @@ -55,7 +55,6 @@ struct rtsx_ucr { struct usb_interface *pusb_intf; struct usb_sg_request current_sg; unsigned char *iobuf; - dma_addr_t iobuf_dma; struct timer_list sg_timer; struct mutex dev_mutex; From ff79e0ca2bea386b3ca2df7fcb8cde2378e03786 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 30 Jun 2022 20:32:56 -0600 Subject: [PATCH 48/56] misc: rtsx_usb: use separate command and response buffers commit 3776c78559853fd151be7c41e369fd076fb679d5 upstream. rtsx_usb uses same buffer for command and response. There could be a potential conflict using the same buffer for both especially if retries and timeouts are involved. Use separate command and response buffers to avoid conflicts. Signed-off-by: Shuah Khan Cc: stable Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cardreader/rtsx_usb.c | 26 +++++++++++++++++--------- include/linux/rtsx_usb.h | 1 - 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c index e147cc8ab0fd..4e2108052509 100644 --- a/drivers/misc/cardreader/rtsx_usb.c +++ b/drivers/misc/cardreader/rtsx_usb.c @@ -631,15 +631,18 @@ static int rtsx_usb_probe(struct usb_interface *intf, ucr->pusb_dev = usb_dev; - ucr->iobuf = kmalloc(IOBUF_SIZE, GFP_KERNEL); - if (!ucr->iobuf) + ucr->cmd_buf = kmalloc(IOBUF_SIZE, GFP_KERNEL); + if (!ucr->cmd_buf) return -ENOMEM; + ucr->rsp_buf = kmalloc(IOBUF_SIZE, GFP_KERNEL); + if (!ucr->rsp_buf) + goto out_free_cmd_buf; + usb_set_intfdata(intf, ucr); ucr->vendor_id = id->idVendor; ucr->product_id = id->idProduct; - ucr->cmd_buf = ucr->rsp_buf = ucr->iobuf; mutex_init(&ucr->dev_mutex); @@ -667,9 +670,11 @@ static int rtsx_usb_probe(struct usb_interface *intf, out_init_fail: usb_set_intfdata(ucr->pusb_intf, NULL); - kfree(ucr->iobuf); - ucr->iobuf = NULL; - ucr->cmd_buf = ucr->rsp_buf = NULL; + kfree(ucr->rsp_buf); + ucr->rsp_buf = NULL; +out_free_cmd_buf: + kfree(ucr->cmd_buf); + ucr->cmd_buf = NULL; return ret; } @@ -682,9 +687,12 @@ static void rtsx_usb_disconnect(struct usb_interface *intf) mfd_remove_devices(&intf->dev); usb_set_intfdata(ucr->pusb_intf, NULL); - kfree(ucr->iobuf); - ucr->iobuf = NULL; - ucr->cmd_buf = ucr->rsp_buf = NULL; + + kfree(ucr->cmd_buf); + ucr->cmd_buf = NULL; + + kfree(ucr->rsp_buf); + ucr->rsp_buf = NULL; } #ifdef CONFIG_PM diff --git a/include/linux/rtsx_usb.h b/include/linux/rtsx_usb.h index a07f7341ebc2..3247ed8e9ff0 100644 --- a/include/linux/rtsx_usb.h +++ b/include/linux/rtsx_usb.h @@ -54,7 +54,6 @@ struct rtsx_ucr { struct usb_device *pusb_dev; struct usb_interface *pusb_intf; struct usb_sg_request current_sg; - unsigned char *iobuf; struct timer_list sg_timer; struct mutex dev_mutex; From ca4a91958466243d50a28d7029394e5e71ef87a8 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 1 Jul 2022 10:53:52 -0600 Subject: [PATCH 49/56] misc: rtsx_usb: set return value in rsp_buf alloc err path commit 2cd37c2e72449a7add6da1183d20a6247d6db111 upstream. Set return value in rsp_buf alloc error path before going to error handling. drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ucr->rsp_buf) ^~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here return ret; ^~~ drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false if (!ucr->rsp_buf) ^~~~~~~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 Fixes: 3776c7855985 ("misc: rtsx_usb: use separate command and response buffers") Reported-by: kernel test robot Cc: stable Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cardreader/rtsx_usb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c index 4e2108052509..f150d8769f19 100644 --- a/drivers/misc/cardreader/rtsx_usb.c +++ b/drivers/misc/cardreader/rtsx_usb.c @@ -636,8 +636,10 @@ static int rtsx_usb_probe(struct usb_interface *intf, return -ENOMEM; ucr->rsp_buf = kmalloc(IOBUF_SIZE, GFP_KERNEL); - if (!ucr->rsp_buf) + if (!ucr->rsp_buf) { + ret = -ENOMEM; goto out_free_cmd_buf; + } usb_set_intfdata(intf, ucr); From 37995f034ff20933f1da12203753a5e6957813d7 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Fri, 1 Jul 2022 22:19:02 -0500 Subject: [PATCH 50/56] dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo commit 607a48c78e6b427b0b684d24e61c19e846ad65d6 upstream. The conditional block for variants with a second clock should have set minItems, not maxItems, which was already 2. Since clock-names requires two items, this typo should not have caused any problems. Fixes: edd14218bd66 ("dt-bindings: dmaengine: Convert Allwinner A31 and A64 DMA to a schema") Signed-off-by: Samuel Holland Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220702031903.21703-1-samuel@sholland.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index 372679dbd216..7e250ce136ee 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -61,7 +61,7 @@ if: then: properties: clocks: - maxItems: 2 + minItems: 2 required: - clock-names From e23cfb3fdcbbc5eb11eeebb97fa2607cd740bd97 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 10 Jul 2022 13:55:49 -0700 Subject: [PATCH 51/56] ida: don't use BUG_ON() for debugging commit fc82bbf4dede758007763867d0282353c06d1121 upstream. This is another old BUG_ON() that just shouldn't exist (see also commit a382f8fee42c: "signal handling: don't use BUG_ON() for debugging"). In fact, as Matthew Wilcox points out, this condition shouldn't really even result in a warning, since a negative id allocation result is just a normal allocation failure: "I wonder if we should even warn here -- sure, the caller is trying to free something that wasn't allocated, but we don't warn for kfree(NULL)" and goes on to point out how that current error check is only causing people to unnecessarily do their own index range checking before freeing it. This was noted by Itay Iellin, because the bluetooth HCI socket cookie code does *not* do that range checking, and ends up just freeing the error case too, triggering the BUG_ON(). The HCI code requires CAP_NET_RAW, and seems to just result in an ugly splat, but there really is no reason to BUG_ON() here, and we have generally striven for allocation models where it's always ok to just do free(alloc()); even if the allocation were to fail for some random reason (usually obviously that "random" reason being some resource limit). Fixes: 88eca0207cf1 ("ida: simplified functions for id allocation") Reported-by: Itay Iellin Suggested-by: Matthew Wilcox Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- lib/idr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/idr.c b/lib/idr.c index f4ab4f4aa3c7..7ecdfdb5309e 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -491,7 +491,8 @@ void ida_free(struct ida *ida, unsigned int id) struct ida_bitmap *bitmap; unsigned long flags; - BUG_ON((int)id < 0); + if ((int)id < 0) + return; xas_lock_irqsave(&xas, flags); bitmap = xas_load(&xas); From 7b721f5aec92593404e1139fb2f50c266eb24e48 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Fri, 20 May 2022 21:14:32 +0300 Subject: [PATCH 52/56] dmaengine: pl330: Fix lockdep warning about non-static key commit b64b3b2f1d81f83519582e1feee87d77f51f5f17 upstream. The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated spinlocks. The lockdep warns about this and disables locking validator. Fix the warning by making lock static. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Radxa ROCK Pi 4C (DT) Call trace: dump_backtrace.part.0+0xcc/0xe0 show_stack+0x18/0x6c dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 register_lock_class+0x4a8/0x4cc __lock_acquire+0x78/0x20cc lock_acquire.part.0+0xe0/0x230 lock_acquire+0x68/0x84 _raw_spin_lock_irqsave+0x84/0xc4 add_desc+0x44/0xc0 pl330_get_desc+0x15c/0x1d0 pl330_prep_dma_cyclic+0x100/0x270 snd_dmaengine_pcm_trigger+0xec/0x1c0 dmaengine_pcm_trigger+0x18/0x24 ... Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail") Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- drivers/dma/pl330.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 6dca548f4dab..5bbae99f2d34 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2591,7 +2591,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) /* If the DMAC pool is empty, alloc new */ if (!desc) { - DEFINE_SPINLOCK(lock); + static DEFINE_SPINLOCK(lock); LIST_HEAD(pool); if (!add_desc(&pool, &lock, GFP_ATOMIC, 1)) From 1be247db203ed5cdd1bbd2c2588cef2185600531 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Thu, 26 May 2022 15:51:11 +0200 Subject: [PATCH 53/56] dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly commit 3770d92bd5237d686e49da7b2fb86f53ee6ed259 upstream. It seems that it is valid to have less than the requested number of descriptors. But what is not valid and leads to subsequent errors is to have zero descriptors. In that case, abort the probing. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Michael Walle Link: https://lore.kernel.org/r/20220526135111.1470926-1-michael@walle.cc Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- drivers/dma/at_xdmac.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index 47552db6b8dc..b5d691ae45dc 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1838,6 +1838,11 @@ static int at_xdmac_alloc_chan_resources(struct dma_chan *chan) for (i = 0; i < init_nr_desc_per_channel; i++) { desc = at_xdmac_alloc_desc(chan, GFP_KERNEL); if (!desc) { + if (i == 0) { + dev_warn(chan2dev(chan), + "can't allocate any descriptors\n"); + return -EIO; + } dev_warn(chan2dev(chan), "only %d descriptors have been allocated\n", i); break; From 37147e22cd8dfc0412495cb361708836157a4486 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Sun, 5 Jun 2022 08:27:23 +0400 Subject: [PATCH 54/56] dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate commit c132fe78ad7b4ce8b5d49a501a15c29d08eeb23a upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. Add missing of_node_put() in to fix this. Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220605042723.17668-2-linmq006@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- drivers/dma/ti/dma-crossbar.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/ti/dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c index 4ba8fa5d9c36..d0720190eb3c 100644 --- a/drivers/dma/ti/dma-crossbar.c +++ b/drivers/dma/ti/dma-crossbar.c @@ -268,6 +268,7 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec, mutex_unlock(&xbar->mutex); dev_err(&pdev->dev, "Run out of free DMA requests\n"); kfree(map); + of_node_put(dma_spec->np); return ERR_PTR(-ENOMEM); } set_bit(map->xbar_out, xbar->dma_inuse); From 8365b151fd50160aeb7d56551d958e4852522b7f Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Sun, 5 Jun 2022 08:27:22 +0400 Subject: [PATCH 55/56] dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate commit 615a4bfc426e11dba05c2cf343f9ac752fb381d2 upstream. of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x") Signed-off-by: Miaoqian Lin Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20220605042723.17668-1-linmq006@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- drivers/dma/ti/dma-crossbar.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/ti/dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c index d0720190eb3c..86ced7f2d771 100644 --- a/drivers/dma/ti/dma-crossbar.c +++ b/drivers/dma/ti/dma-crossbar.c @@ -245,6 +245,7 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec, if (dma_spec->args[0] >= xbar->xbar_requests) { dev_err(&pdev->dev, "Invalid XBAR request number: %d\n", dma_spec->args[0]); + put_device(&pdev->dev); return ERR_PTR(-EINVAL); } @@ -252,12 +253,14 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec, dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0); if (!dma_spec->np) { dev_err(&pdev->dev, "Can't get DMA master\n"); + put_device(&pdev->dev); return ERR_PTR(-EINVAL); } map = kzalloc(sizeof(*map), GFP_KERNEL); if (!map) { of_node_put(dma_spec->np); + put_device(&pdev->dev); return ERR_PTR(-ENOMEM); } @@ -269,6 +272,7 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec, dev_err(&pdev->dev, "Run out of free DMA requests\n"); kfree(map); of_node_put(dma_spec->np); + put_device(&pdev->dev); return ERR_PTR(-ENOMEM); } set_bit(map->xbar_out, xbar->dma_inuse); From 26ae9c361414418ed02d6e97b3d0c8eaa93be355 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 12 Jul 2022 16:32:23 +0200 Subject: [PATCH 56/56] Linux 5.10.130 Link: https://lore.kernel.org/r/20220711090541.764895984@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Florian Fainelli Tested-by: Guenter Roeck Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Salvatore Bonaccorso Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 7d52cee37488..b0a35378803d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 10 -SUBLEVEL = 129 +SUBLEVEL = 130 EXTRAVERSION = NAME = Dare mighty things