diff --git a/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd.h b/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd.h
index ba54785315d1..38a153f4c8b7 100644
--- a/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd.h
+++ b/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd.h
@@ -274,6 +274,7 @@ void dwc_otg_iso_buffer_done(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep,
 			     void *req_handle);
 
 extern void do_test_mode(void *data);
+extern int aml_new_usb_get_mode(void);
 #ifdef CONFIG_AMLOGIC_USB3PHY
 extern void set_usb_phy_device_tuning(int port, int default_val);
 #endif
diff --git a/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd_intr.c b/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd_intr.c
index 4b9fb07478b5..3382a6a1260d 100644
--- a/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd_intr.c
+++ b/drivers/amlogic/usb/dwc_otg/310/dwc_otg_pcd_intr.c
@@ -1065,18 +1065,21 @@ int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
 
 #ifdef CONFIG_AMLOGIC_USB3PHY
 	if (GET_CORE_IF(pcd)->phy_interface != 1) {
-		speed = get_device_speed(GET_CORE_IF(pcd));
-		if (speed != USB_SPEED_HIGH) {
-			gintsts.d32 = 0;
-			gintsts.b.enumdone = 1;
-			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
-				core_global_regs->gintsts, gintsts.d32);
-			DWC_DEBUGPL(DBG_PCD, "false speed emun\n");
-			return 1;
+		if (GET_CORE_IF(pcd)->controller_type == USB_OTG) {
+			speed = get_device_speed(GET_CORE_IF(pcd));
+			if ((speed != USB_SPEED_HIGH) &&
+				(aml_new_usb_get_mode() != 1)) {
+				gintsts.d32 = 0;
+				gintsts.b.enumdone = 1;
+				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
+					core_global_regs->gintsts, gintsts.d32);
+				DWC_DEBUGPL(DBG_PCD, "false speed emun\n");
+				return 1;
+			}
 		}
 
 		set_usb_phy_device_tuning(1, 0);
-	}
+}
 #endif
 
 	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) {
@@ -1558,7 +1561,8 @@ static inline void do_get_status(dwc_otg_pcd_t *pcd)
 			}
 			break;
 		} else {
-			*status = 0x1;	/* Self powered */
+			*status = 0x0;	/* bus powered */
+			//*status = 0x1;	/* Self powered */
 			*status |= pcd->remote_wakeup_enable << 1;
 			break;
 		}
diff --git a/drivers/amlogic/usb/phy/phy-aml-new-usb2-v2.c b/drivers/amlogic/usb/phy/phy-aml-new-usb2-v2.c
index 787da97d9a7d..e2b55e8d8e07 100644
--- a/drivers/amlogic/usb/phy/phy-aml-new-usb2-v2.c
+++ b/drivers/amlogic/usb/phy/phy-aml-new-usb2-v2.c
@@ -40,7 +40,7 @@ void set_usb_phy_host_tuning(int port, int default_val)
 	if (!g_phy2_v2)
 		return;
 
-	if (g_phy2_v2->phy_version == 1)
+	if (g_phy2_v2->phy_version)
 		return;
 
 	if (port > g_phy2_v2->portnum)
@@ -69,7 +69,7 @@ void set_usb_phy_device_tuning(int port, int default_val)
 	if (!g_phy2_v2)
 		return;
 
-	if (g_phy2_v2->phy_version == 1)
+	if (g_phy2_v2->phy_version)
 		return;
 
 	if (port > g_phy2_v2->portnum)
@@ -91,7 +91,6 @@ void set_usb_phy_device_tuning(int port, int default_val)
 	g_phy2_v2->phy_cfg_state[port] = default_val;
 }
 
-
 void set_usb_pll(struct amlogic_usb_v2 *phy, void __iomem	*reg)
 {
 	/* TO DO set usb  PLL */
@@ -102,11 +101,23 @@ void set_usb_pll(struct amlogic_usb_v2 *phy, void __iomem	*reg)
 	writel((0x10000000 | (phy->pll_setting[0])), reg + 0x40);
 
 	/* PHY Tune */
-	writel(phy->pll_setting[3], reg + 0x50);
-	writel(phy->pll_setting[4], reg + 0x10);
-	/* Recovery analog status */
-	writel(0, reg + 0x38);
-	writel(phy->pll_setting[5], reg + 0x34);
+	if (g_phy2_v2) {
+		if (g_phy2_v2->phy_version == 2) {
+		/**g12b revB don't need set 0x10 ,0x38 and 0x34**/
+			writel(phy->pll_setting[3], reg + 0x50);
+			writel(0x70000, reg + 0x34);
+		} else {
+			writel(phy->pll_setting[3], reg + 0x50);
+			writel(phy->pll_setting[4], reg + 0x10);
+			writel(0, reg + 0x38);
+			writel(phy->pll_setting[5], reg + 0x34);
+		}
+	} else {
+		writel(phy->pll_setting[3], reg + 0x50);
+		writel(phy->pll_setting[4], reg + 0x10);
+		writel(0, reg + 0x38);
+		writel(phy->pll_setting[5], reg + 0x34);
+	}
 
 	writel(TUNING_DISCONNECT_THRESHOLD, reg + 0xC);
 }
@@ -246,7 +257,7 @@ static int amlogic_new_usb2_probe(struct platform_device *pdev)
 
 	if (is_meson_g12b_cpu()) {
 		if (!is_meson_rev_a())
-			phy_version = 1;
+			phy_version = 2;
 	}
 
 	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/amlogic/usb/phy/phy-aml-new-usb3-v2.c b/drivers/amlogic/usb/phy/phy-aml-new-usb3-v2.c
index 3f360b589a79..727cdd845306 100644
--- a/drivers/amlogic/usb/phy/phy-aml-new-usb3-v2.c
+++ b/drivers/amlogic/usb/phy/phy-aml-new-usb3-v2.c
@@ -124,6 +124,19 @@ void aml_new_usb_v2_init(void)
 }
 EXPORT_SYMBOL(aml_new_usb_v2_init);
 
+int aml_new_usb_get_mode(void)
+{
+	union usb_r5_v2 r5 = {.d32 = 0};
+
+	r5.d32 = readl(usb_new_aml_regs_v2.usb_r_v2[5]);
+	if (r5.b.iddig_curr == 0)
+		return 0;
+	else
+		return 1;
+}
+EXPORT_SYMBOL(aml_new_usb_get_mode);
+
+
 static void cr_bus_addr(unsigned int addr)
 {
 	union phy3_r4 phy_r4 = {.d32 = 0};
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5b2f13ddc93c..508c9ef22898 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -2212,8 +2212,12 @@ free_interfaces:
 		device_enable_async_suspend(&intf->dev);
 		ret = device_add(&intf->dev);
 #ifdef CONFIG_AMLOGIC_USB
-		if (((&intf->dev)->driver) == NULL)
-			dev_err(&dev->dev, "Unsupported device\n");
+		if (((&intf->dev)->driver) == NULL) {
+			if (intf->cur_altsetting->desc.bInterfaceClass == 0x09)
+				dev_err(&dev->dev, "Unsupported the hub\n");
+			else
+				dev_err(&dev->dev, "Unsupported device\n");
+		}
 #endif
 		if (ret != 0) {
 			dev_err(&dev->dev, "device_add(%s) --> %d\n",