diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-amp-display-rgb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-amp-display-rgb.dts
index 99f247093d6d..e4fa7a2f2969 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-amp-display-rgb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-amp-display-rgb.dts
@@ -59,7 +59,6 @@
 		enable-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
 		enable-delay-ms = <20>;
 		reset-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
-		reset-value = <0>;
 		reset-delay-ms = <10>;
 		status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-display-rgb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-display-rgb.dts
index 3e58d704a7b9..68478f33d79a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-display-rgb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb-audio-v10-display-rgb.dts
@@ -58,7 +58,6 @@
 		//enable-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
 		//enable-delay-ms = <20>;
 		//reset-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
-		//reset-value = <0>;
 		//reset-delay-ms = <10>;
 		status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3308bs-evb-ext-mcu-v10.dtsi b/arch/arm64/boot/dts/rockchip/rk3308bs-evb-ext-mcu-v10.dtsi
index 8a2bec440e5f..df5c9c51f5df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308bs-evb-ext-mcu-v10.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308bs-evb-ext-mcu-v10.dtsi
@@ -84,7 +84,6 @@
 		enable-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 		enable-delay-ms = <20>;
 		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
-		reset-value = <0>;
 		reset-delay-ms = <10>;
 		prepare-delay-ms = <20>;
 		unprepare-delay-ms = <20>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308bs-evb-rgb-display-v20.dts b/arch/arm64/boot/dts/rockchip/rk3308bs-evb-rgb-display-v20.dts
index 3911b65fd178..d56f8706c2f2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308bs-evb-rgb-display-v20.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308bs-evb-rgb-display-v20.dts
@@ -58,7 +58,6 @@
 		enable-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 		enable-delay-ms = <20>;
 		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
-		reset-value = <0>;
 		reset-delay-ms = <10>;
 		status = "okay";