diff --git a/arch/arm/boot/dts/amlogic/meson8b_odroidc.dtd b/arch/arm/boot/dts/amlogic/meson8b_odroidc.dtd
index 64e31cb634c1..0986d0485334 100644
--- a/arch/arm/boot/dts/amlogic/meson8b_odroidc.dtd
+++ b/arch/arm/boot/dts/amlogic/meson8b_odroidc.dtd
@@ -613,109 +613,6 @@ void root_func(){
     };
 
 
-    pmu {
-        compatible = "amlogic, aml_pmu_prober";                 /* fixed for pmu driver, don't change   */
-        #address-cells = <1>;
-        #size-cells = <0>;
-        driver_version = "v0.60";
-//$$ DEVICE = "Pmu_axp202"
-//$$ L2 PROP_STR = "sub_type"
-//$$ L2 PROP_STR = "i2c_bus"
-//$$ L2 PROP_U32 = "reg"
-//$$ L2 PROP_U32 = "soft_limit_to99"
-//$$ L2 PROP_U32 = "ddr_voltage"
-//$$ L2 PROP_U32 = "vddao_voltage"
-//$$ L2 PROP_CHOICE "battery_parameter_match" = "board_battery"
-//$$ L2 PROP_STR = "status"
-//        axp202 { /* PMU for AXP */
-//            compatible = "axp_mfd";                             /* for driver probe, must have          */
-//            sub_type = "axp20_mfd";                             /** sub type of pmu family, must have    */
-//            i2c_bus = "i2c_bus_ao";                             /** attached i2c bus, must have          */
-//            reg = <0x34>;                                       /** device i2c address, must have        */
-//            soft_limit_to99 = <0>;                              /** optional                             */
-//            ddr_voltage   = <1500000>;                          /** default voltage for DDR, optional    */
-//            vddao_voltage = <1200000>;                          /** default voltage for AO, optional     */
-//            status = "disable";                                 /** status of pmu, only one should be OK */
-//        };
-//$$ DEVICE = "Pmu_aml1212"
-//$$ L2 PROP_STR = "sub_type"
-//$$ L2 PROP_STR = "i2c_bus"
-//$$ L2 PROP_U32 = "reg"
-//$$ L2 PROP_U32 = "soft_limit_to99"
-//$$ L2 PROP_U32 = "ddr_voltage"
-//$$ L2 PROP_U32 = "vddao_voltage"
-//$$ L2 PROP_CHOICE "battery_parameter_match" = "board_battery"
-//$$ L2 PROP_STR = "status"
-//        aml1212{                                                /* PMU for AML1212, see comment above   */
-//            compatible = "amlogic_pmu";                         /** for driver probe, must have          */
-//            sub_type = "aml1212";                               /** sub type of pmu family, must have    */
-//            i2c_bus = "i2c_bus_ao";                             /** attached i2c bus, must have          */
-//            reg = <0x35>;                                       /** device i2c address, must have        */
-//            soft_limit_to99 = <0>;                              /** optional                             */
-//            ddr_voltage   = <1500000>;                          /** default voltage for DDR, optional    */
-//            vddao_voltage = <1200000>;                          /** default voltage for AO, optional     */
-//            status = "disable";                                 /** status of pmu, only one should be OK */
-//        };
-//$$ DEVICE = "Pmu_rn5t618"
-//$$ L2 PROP_STR = "sub_type"
-//$$ L2 PROP_STR = "i2c_bus"
-//$$ L2 PROP_U32 = "reg"
-//$$ L2 PROP_U32 = "soft_limit_to99"
-//$$ L2 PROP_U32 = "ddr_voltage"
-//$$ L2 PROP_U32 = "vddao_voltage"
-//$$ L2 PROP_CHOICE "battery_parameter_match" = "board_battery"
-//$$ L2 PROP_STR = "status"
-//        rn5t618{                                                /* PMU for RN5T618, see comment above   */
-//            compatible = "ricoh_pmu";                           /* for driver probe, must have          */
-//            sub_type = "rn5t618";                               /** sub type of pmu family, must have    */
-//            i2c_bus = "i2c_bus_ao";                             /** attached i2c bus, must have          */
-//            reg = <0x32>;                                       /** device i2c address, must have        */
-//            soft_limit_to99 = <0>;                              /** optional                             */
-//            ddr_voltage   = <1500000>;                          /** default voltage for DDR, optional    */
-//            vddao_voltage = <1200000>;                          /** default voltage for AO, optional     */
-//            vbus_dcin_short_connect = <0>;
-//            status = "disable";                                 /** status of pmu, only one should be OK */
-//        };
-
-//$$ DEVICE = "Pmu_aml1216"
-//$$ L2 PROP_STR = "sub_type"
-//$$ L2 PROP_STR = "i2c_bus"
-//$$ L2 PROP_U32 = "reg"
-//$$ L2 PROP_U32 = "soft_limit_to99"
-//$$ L2 PROP_U32 = "ddr_voltage"
-//$$ L2 PROP_U32 = "vddao_voltage"
-//$$ L2 PROP_CHOICE "battery_parameter_match" = "board_battery"
-//$$ L2 PROP_STR = "status"
-//        aml1216{
-//            compatible = "amlogic_pmu";                         /** compatible to amlogic PMU            */
-//            sub_type = "aml1216_pmu";                           /** sub type of pmu family, must have    */
-//            i2c_bus = "i2c_bus_ao";                             /** attached i2c bus, must have          */
-//            reg = <0x35>;                                       /** device i2c address, must have        */
-//            soft_limit_to99 = <0>;                              /** optional                             */
-//            vbus_dcin_short_connect = <0>;
-//            status = "disable";                                 /** status of pmu, only one should be OK */
-//        };
-
-//$$ DEVICE = "Pmu_aml1218"
-//$$ L2 PROP_STR = "sub_type"
-//$$ L2 PROP_STR = "i2c_bus"
-//$$ L2 PROP_U32 = "reg"
-//$$ L2 PROP_U32 = "soft_limit_to99"
-//$$ L2 PROP_U32 = "ddr_voltage"
-//$$ L2 PROP_U32 = "vddao_voltage"
-//$$ L2 PROP_CHOICE "battery_parameter_match" = "board_battery"
-//$$ L2 PROP_STR = "status"
-        aml1218{
-            compatible = "amlogic_pmu";                         /** compatible to amlogic PMU            */
-            sub_type = "aml1218_pmu";                           /** sub type of pmu family, must have    */
-            i2c_bus = "i2c_bus_ao";                             /** attached i2c bus, must have          */
-            reg = <0x35>;                                       /** device i2c address, must have        */
-            soft_limit_to99 = <0>;                              /** optional                             */
-            vbus_dcin_short_connect = <0>;
-            status = "okay";                                    /** status of pmu, only one should be OK */
-        };
-    };
-
 /// ***************************************************************************************
 ///     -       USB Controller
 //$$ MODULE="USB Controller"