From f2ff5c1ed3fa17220d2812bcf8dbd58a80118d5b Mon Sep 17 00:00:00 2001 From: Wyon Bi Date: Tue, 24 May 2022 17:54:31 +0800 Subject: [PATCH] Revert "dt-bindings: display: bridge: Document Chipone ICN6211 MIPI-DSI to RGB bridge bindings" This reverts commit 4d076eca0467f6bf614c46bedc46c14ea595460e. Signed-off-by: Wyon Bi Change-Id: I243d6a7daec50744d5133f685369444b727aaea2 --- .../display/bridge/chipone,icn6211.txt | 49 ------------------- 1 file changed, 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt deleted file mode 100644 index 412e353b7de3..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.txt +++ /dev/null @@ -1,49 +0,0 @@ -Chipone ICN6211 MIPI-DSI to RGB bridge bindings - -Required properties: -- compatible: "chipone,icn6211" -- reg: I2C slave address -- clocks: phandle to reference clock for RGB output clock. -- clock-names: name should be "refclk" - -Optional properties: -- enable-gpios: a GPIO spec for the en pin -- vdd1-supply: phandle to vdd1 regulator device node -- vdd2-supply: phandle to vdd2 regulator device node -- vdd3-supply: phandle to vdd3 regulator device node - -Example: - -&i2c0 { - status = "okay"; - - icn6211@2c { - compatible = "chipone,icn6211"; - reg = <0x2c>; - clocks = <&osc26m>; - clock-names = "refclk"; - enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - icn6211_in_dsi: endpoint { - remote-endpoint = <&dsi_out_icn6211>; - }; - }; - - port@1 { - reg = <1>; - - icn6211_out_panel: endpoint { - remote-endpoint = <&panel_in_icn6211>; - }; - }; - }; - - }; -};