mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-09 20:32:04 +09:00
arm64: dts: rockchip: Add rk3368 GeekBox dts
The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC. Some connectors are available directly on the module. This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Andreas Färber
committed by
Heiko Stuebner
Heiko Stuebner
parent
479d75b760
commit
fd7b980c9e
@@ -1,4 +1,5 @@
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
|
||||
319
arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
Normal file
319
arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
Normal file
@@ -0,0 +1,319 @@
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3368.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "GeekBox";
|
||||
compatible = "geekbuying,geekbox", "rockchip,rk3368";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
ext_gmac: gmac-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "ext_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
ir: ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_int>;
|
||||
};
|
||||
|
||||
keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwr_key>;
|
||||
|
||||
power {
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue {
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
||||
label = "geekbox:blue:led";
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
red {
|
||||
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
|
||||
label = "geekbox:red:led";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
clock-frequency = <150000000>;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
vqmmc-supply = <&vcc18_flash>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
|
||||
};
|
||||
|
||||
&gmac {
|
||||
status = "okay";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
|
||||
rockchip,system-power-controller;
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc_io>;
|
||||
vcc9-supply = <&vcc_sys>;
|
||||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_sys>;
|
||||
vcc12-supply = <&vcc_io>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
#clock-cells = <1>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vdd_cpu";
|
||||
};
|
||||
|
||||
vdd_log: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vdd_log";
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_io";
|
||||
};
|
||||
|
||||
vcc18_flash: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_flash";
|
||||
};
|
||||
|
||||
vcc33_lcd: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc33_lcd";
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd_10";
|
||||
};
|
||||
|
||||
vcca_18: LDO_REG4 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_18";
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
};
|
||||
|
||||
vdd10_lcd: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd10_lcd";
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_18";
|
||||
};
|
||||
|
||||
vcc18_lcd: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_lcd";
|
||||
};
|
||||
|
||||
vcc_sd: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_sd";
|
||||
};
|
||||
|
||||
vcc_lan: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_lan";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ir {
|
||||
ir_int: ir-int {
|
||||
rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
pwr_key: pwr-key {
|
||||
rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_sleep: pmic-sleep {
|
||||
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
rockchip,hw-tshut-mode = <0>; /* CRU */
|
||||
rockchip,hw-tshut-polarity = <1>; /* high */
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user