commit 72f1de49ff upstream.
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4fb912e5e1 ]
DSI sink devices typically want the DSI host powered up and configured
before they are powered up. pre_enable is the place this would normally
happen, but they are called in reverse order from panel/connector towards
the encoder, which is the "wrong" order.
Add a new flag pre_enable_prev_first that any bridge can set
to swap the order of pre_enable (and post_disable) for that and the
immediately previous bridge.
Should the immediately previous bridge also set the
pre_enable_prev_first flag, the previous bridge to that will be called
before either of those which requested pre_enable_prev_first.
eg:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3,
Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20221205173328.1395350-5-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Stable-dep-of: dd9e329af7 ("drm/bridge: ti-sn65dsi83: Fix enable/disable flow to meet spec")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c21f11d182 upstream.
In mutex_init() lockdep identifies a lock by defining a special static
key for each lock class. However if we wrap the macro in a function,
like in drmm_mutex_init(), we end up generating:
int drmm_mutex_init(struct drm_device *dev, struct mutex *lock)
{
static struct lock_class_key __key;
__mutex_init((lock), "lock", &__key);
....
}
The static __key here is what lockdep uses to identify the lock class,
however since this is just a normal function the key here will be
created once, where all callers then use the same key. In effect the
mutex->depmap.key will be the same pointer for different
drmm_mutex_init() callers. This then results in impossible lockdep
splats since lockdep thinks completely unrelated locks are the same lock
class.
To fix this turn drmm_mutex_init() into a macro such that it generates a
different "static struct lock_class_key __key" for each invocation,
which looks to be inline with what mutex_init() wants.
v2:
- Revamp the commit message with clearer explanation of the issue.
- Rather export __drmm_mutex_release() than static inline.
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Sarah Walker <sarah.walker@imgtec.com>
Fixes: e13f13e039 ("drm: Add DRM-managed mutex_init()")
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519090733.489019-1-matthew.auld@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9630b585b6 ]
Consider this scenario:
1. APP1 continuously creates lots of small GEMs
2. APP2 triggers `drop_caches`
3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable
GEMs
4. msm_gem_shrinker_scan() returns non-zero number of freed pages
and causes shrinker to try shrink more
5. msm_gem_shrinker_scan() returns non-zero number of freed pages again,
goto 4
6. The APP2 is blocked in `drop_caches` until APP1 stops producing
purgeable GEMs
To prevent this blocking scenario, check number of remaining pages
that GPU shrinker couldn't release due to a GEM locking contention
or shrinking rejection. If there are no remaining pages left to shrink,
then there is no need to free up more pages and shrinker may break out
from the loop.
This problem was found during shrinker/madvise IOCTL testing of
virtio-gpu driver. The MSM driver is affected in the same way.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b352ba54a8 ("drm/msm/gem: Convert to using drm_gem_lru")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9d27c6be5 ]
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: 754affd62d
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
msm-next for v6.1
DPU:
- simplified VBIF configuration
- cleaned up CTL interfaces to accept indices rather than flush masks
DSI:
- removed unused msm_display_dsc_config struct
- switch regulator calls to new bulk API
- switched to use PANEL_BRIDGE for directly attached panels
DSI PHY:
- converted drivers to use parent_hws instead of parent_names
DP:
- cleaned up pixel_rate handling
HDMI PHY:
- turned hdmi-phy-8996 into OF clk provider
core:
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
gpu+gem:
- Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com
upgrade the callchain to drm_dbg() and drm_dev_dbg(); add a struct
_ddebug ptr parameter to them, and supply that additional param by
replacing the '_no_desc' flavor of dyndbg Factory macro currently used
with the flavor that supplies the descriptor.
NOTES:
The descriptor gives these fns access to the decorator flags, but they
do none of the dynamic-prefixing done by dynamic_emit_prefix(), which
is currently static.
DRM already has conventions for logging/messaging; just tossing
optional decorations on top probably wouldn't help. Instead, existing
flags (or new ones, perhaps 'sd' ala lspci) can be used to make
current message conventions optional. This suggests a new
drmdbg_prefix_emit() to handle prefixing locally.
For CONFIG_DRM_USE_DYNAMIC_DEBUG=N, just pass null descriptor.
desc->class_id is redundant with category parameter, but its
availability is dependent on desc.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DRM_USE_DYNAMIC_DEBUG=y, the drm.debug API (a macro stack,
calling _+drm_*dbg() eventually) invokes a dyndbg Factory macro to
create a descriptor for each callsite, thus making them individually
>control-able.
In this case, the calls to _drm_*dbg are unreachable unless the
callsite is enabled. So those calls can short-circuit their early
do-nothing returns. Provide and use __drm_debug_enabled(), to do this
when config'd, or the _raw flags-check otherwize.
And since dyndbg is in use, lets also instrument the remaining users
of drm_debug_enabled, by wrapping the _raw in a macro with a:
pr_debug("todo: is this frequent enough to optimize ?\n");
For CONFIG_DRM_USE_DYNAMIC_DEBUG=n, do no site instrumenting at all,
since JUMP_LABEL might be off, and we don't want to make work.
With drm, amdgpu, i915, nouveau loaded, heres remaining uses of
drm_debug_enabled(), which costs ~1.5kb data to control the
pr_debug("todo:..")s.
Some of those uses might be ok to use __drm_debug_enabled() by
inspection, others might warrant conversion to use dyndbg Factory
macros, and that would want callrate data to estimate the savings
possible. TBH, any remaining savings are probably small; drm.debug
covers the vast bulk of the uses. Maybe "vblank" is the exception.
:#> grep todo /proc/dynamic_debug/control | wc
21 168 2357
:#> grep todo /proc/dynamic_debug/control
drivers/gpu/drm/drm_edid_load.c:178 [drm]edid_load =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:410 [drm]drm_crtc_accurate_vblank_count =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:787 [drm]drm_crtc_vblank_helper_get_vblank_timestamp_internal =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1491 [drm]drm_vblank_restore =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1433 [drm]drm_vblank_enable =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_plane.c:2168 [drm]drm_mode_setplane =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1359 [drm_display_helper]drm_dp_mst_wait_tx_reply =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2864 [drm_display_helper]process_single_tx_qlock =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2909 [drm_display_helper]drm_dp_queue_down_tx =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1686 [drm_display_helper]drm_dp_mst_update_slots =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_dp.c:1111 [i915]intel_dp_print_rates =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5434 [i915]cnp_enable_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5459 [i915]intel_backlight_device_register =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:43 [i915]intel_opregion_notify_encoder =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:53 [i915]asle_set_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_bios.c:1088 [i915]intel_bios_is_dsi_present =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_display_debugfs.c:6153 [i915]i915_drrs_ctl_set =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/intel_pcode.c:26 [i915]snb_pcode_read =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/i915_getparam.c:785 [i915]i915_getparam_ioctl =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:282 [amdgpu]vcn_v2_5_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:433 [amdgpu]vcn_v2_0_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
:#>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm_print defines all of these:
drm_dbg_{core,kms,prime,atomic,vbl,lease,_dp,_drmres}
but not drm_dbg_driver itself, since it was the original drm_dbg.
To improve namespace symmetry, change the drm_dbg defn to
drm_dbg_driver, and redef grandfathered name to symmetric one.
This will help with nouveau, which uses its own stack of macros to
construct calls to dev_info, dev_dbg, etc, for which adaptation means
drm_dbg_##driver constructs.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lkp robot told me:
>> drivers/gpu/drm/drm_ioc32.c:989:2:
error: call to undeclared function '_dynamic_func_call_cls';
ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
DRM_DEBUG("comm=\"%s\", pid=%d, dev=0x%lx, auth=%d, %s\n",
Since that macro is defined in drm_print.h, and under DRM_USE_DYN*=y
configs, invokes dyndbg-factory macros, include dynamic_debug.h from
there too, so that those configs have the definitions of all the
macros in the callchain.
This is done as a separate patch mostly to see how lkp sorts it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg()
in one of dyndbg's Factory macros: _dynamic_func_call_no_desc().
This adds the callsite descriptor into the code, and an entry for each
into /proc/dynamic_debug/control.
#> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control
CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data
footprint cost of per-callsite control; 56 bytes/site * ~2k for i915,
~4k callsites for amdgpu. This is large enough that a kernel builder
might not want it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
change drm_dev_dbg & drm_dbg to macros, which forward to the renamed
functions (with __ prefix added).
Those functions sit below the categorized layer of macros implementing
the DRM debug.category API, and implement most of it. These are good
places to insert dynamic-debug jump-label mechanics, which will allow
DRM to avoid the runtime cost of drm_debug_enabled().
no functional changes.
memory cost baseline: (unchanged)
bash-5.1# drms_load
[ 9.220389] dyndbg: 1 debug prints in module drm
[ 9.224426] ACPI: bus type drm_connector registered
[ 9.302192] dyndbg: 2 debug prints in module ttm
[ 9.305033] dyndbg: 8 debug prints in module video
[ 9.627563] dyndbg: 127 debug prints in module i915
[ 9.721505] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 10.091345] dyndbg: 2196 debug prints in module amdgpu
[ 10.106589] [drm] amdgpu kernel modesetting enabled.
[ 10.107270] amdgpu: CRAT table not found
[ 10.107926] amdgpu: Virtual CRAT table created for CPU
[ 10.108398] amdgpu: Topology: Add CPU node
[ 10.168507] dyndbg: 3 debug prints in module wmi
[ 10.329587] dyndbg: 3 debug prints in module nouveau
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DECLARE_DYNDBG_CLASSMAP across DRM:
- in .c files, since macro defines/initializes a record
- in drivers, $mod_{drv,drm,param}.c
ie where param setup is done, since a classmap is param related
- in drm/drm_print.c
since existing __drm_debug param is defined there,
and we ifdef it, and provide an elaborated alternative.
- in drm_*_helper modules:
dp/drm_dp - 1st item in makefile target
drivers/gpu/drm/drm_crtc_helper.c - random pick iirc.
Since these modules all use identical CLASSMAP declarations (ie: names
and .class_id's) they will all respond together to "class DRM_UT_*"
query-commands:
:#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
NOTES:
This changes __drm_debug from int to ulong, so BIT() is usable on it.
DRM's enum drm_debug_category values need to sync with the index of
their respective class-names here. Then .class_id == category, and
dyndbg's class FOO mechanisms will enable drm_dbg(DRM_UT_KMS, ...).
Though DRM needs consistent categories across all modules, thats not
generally needed; modules X and Y could define FOO differently (ie a
different NAME => class_id mapping), changes are made according to
each module's private class-map.
No callsites are actually selected by this patch, since none are
class'd yet.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
